diff options
Diffstat (limited to 'docs/configguide')
| -rw-r--r-- | docs/configguide/configguide.rst | 119 | ||||
| -rw-r--r-- | docs/configguide/index.rst | 120 |
2 files changed, 120 insertions, 119 deletions
diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst new file mode 100644 index 00000000..1908b543 --- /dev/null +++ b/docs/configguide/configguide.rst @@ -0,0 +1,119 @@ +Functional testing Installation +=============================== + +Pull the Functest Docker image from the Docker hub:: + + $ docker pull opnfv/functest:brahmaputra.1.0 + + +Check that the image is available:: + + $ docker images + +Run the docker container giving the environment variables:: + + - INSTALLER_TYPE. Possible values are "apex", "compass", "fuel" or "joid". + - INSTALLER_IP. each installer has its installation strategy. + +Functest may need to know the IP of the installer to retrieve the credentials +(e.g. usually "10.20.0.2" for fuel, not neede for joid...). + +The minimum command to create the Functest docker file can be described as +follows:: + + docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash + +Optionally, it is possible to precise the container name through the option +--name:: + + docker run --name "CONTAINER_NAME" -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash + +It is also possible to to indicate the path of the OpenStack creds using -v:: + + docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds opnfv/functest:brahmaputra.1.0 /bin/bash + +The local file will be mounted in the container under +/home/opnfv/functest/conf/openstack.creds + +After the run command the prompt appears which means that we are inside the +container and ready to run Functest. + +Inside the container, the following directory structure should be in place:: + + `-- home + `-- opnfv + |-- functest + | |-- conf + | |-- data + | `-- results + `-- repos + |-- bgpvpn + |-- functest + |-- odl_integration + |-- rally + |-- releng + `-- vims-test + + +Basically the container includes: + + * Functest directory to store the configuration (the OpenStack creds are paste + in /home/opngb/functest/conf), the data (images neede for test for offline + testing), results (some temporary artifacts may be stored here) + * Repositories: the functest repository will be used to prepare the + environment, run the tests. Other repositories are used for the installation + of the tooling (e.g. rally) and/or the retrieval of feature projects + scenarios (e.g. bgpvpn) + +The arborescence under the functest repo can be described as follow:: + + . + |-- INFO + |-- LICENSE + |-- commons + | |-- ims + | |-- mobile + | `-- traffic-profile-guidelines.rst + |-- docker + | |-- Dockerfile + | |-- common.sh + | |-- prepare_env.sh + | |-- requirements.pip + | `-- run_tests.sh + |-- docs + | |-- configguide + | |-- functest.rst + | |-- images + | `-- userguide + `-- testcases + |-- Controllers + |-- VIM + |-- __init__.py + |-- config_functest.py + |-- config_functest.yaml + |-- functest_utils.py + |-- functest_utils.pyc + |-- vIMS + `-- vPing + +We may distinguish 4 different folders: + + * commons: it is a folder dedicated to store traffic profile or any test + inputs that could be reused by any test project + * docker: this folder includes the scripts that will be used to setup the + environment and run the tests + * docs: this folder includes the user and installation/configuration guide + * testcases: this folder includes the scripts required by Functest internal + test cases + + +Firstly run the script to install functest environment:: + + $ ${repos_dir}/functest/docker/prepare_env.sh + +NOTE: ${repos_dir} is a default environment variable inside the docker +container, which points to /home/opnfv/repos + +Run the script to start the tests:: + + $ ${repos_dir}/functest/docker/run_tests.sh diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst index f23b11d4..7519bb85 100644 --- a/docs/configguide/index.rst +++ b/docs/configguide/index.rst @@ -169,125 +169,7 @@ Please note that the Functest container has been designed for OPNFV, however, it would be possible to adapt it to any VIM+controller environment as most of the testcases are upstream testcases. -Manual Installation -=================== - -Pull the Functest Docker image from the Docker hub:: - - $ docker pull opnfv/functest:brahmaputra.1.0 - - -Check that the image is available:: - - $ docker images - -Run the docker container giving the environment variables:: - - - INSTALLER_TYPE. Possible values are "apex", "compass", "fuel" or "joid". - - INSTALLER_IP. each installer has its installation strategy. - -Functest may need to know the IP of the installer to retrieve the credentials -(e.g. usually "10.20.0.2" for fuel, not neede for joid...). - -The minimum command to create the Functest docker file can be described as -follows:: - - docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash - -Optionally, it is possible to precise the container name through the option ---name:: - - docker run --name "CONTAINER_NAME" -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" opnfv/functest:brahmaputra.1.0 /bin/bash - -It is also possible to to indicate the path of the OpenStack creds using -v:: - - docker run -it -e "INSTALLER_IP=10.20.0.2" -e "INSTALLER_TYPE=fuel" -v <path_to_your_local_creds_file>:/home/opnfv/functest/conf/openstack.creds opnfv/functest:brahmaputra.1.0 /bin/bash - -The local file will be mounted in the container under -/home/opnfv/functest/conf/openstack.creds - -After the run command the prompt appears which means that we are inside the -container and ready to run Functest. - -Inside the container, you must have the following directory structure:: - - `-- home - `-- opnfv - |-- functest - | |-- conf - | |-- data - | `-- results - `-- repos - |-- bgpvpn - |-- functest - |-- odl_integration - |-- rally - |-- releng - `-- vims-test - - -Basically the container includes: - - * Functest directory to store the configuration (the OpenStack creds are paste - in /home/opngb/functest/conf), the data (images neede for test for offline - testing), results (some temporary artifacts may be stored here) - * Repositories: the functest repository will be used to prepare the - environment, run the tests. Other repositories are used for the installation - of the tooling (e.g. rally) and/or the retrieval of feature projects - scenarios (e.g. bgpvpn) - -The arborescence under the functest repo can be described as follow:: - - . - |-- INFO - |-- LICENSE - |-- commons - | |-- ims - | |-- mobile - | `-- traffic-profile-guidelines.rst - |-- docker - | |-- Dockerfile - | |-- common.sh - | |-- prepare_env.sh - | |-- requirements.pip - | `-- run_tests.sh - |-- docs - | |-- configguide - | |-- functest.rst - | |-- images - | `-- userguide - `-- testcases - |-- Controllers - |-- VIM - |-- __init__.py - |-- config_functest.py - |-- config_functest.yaml - |-- functest_utils.py - |-- functest_utils.pyc - |-- vIMS - `-- vPing - -We may distinguish 4 different folders: - - * commons: it is a folder dedicated to store traffic profile or any test - inputs that could be reused by any test project - * docker: this folder includes the scripts that will be used to setup the - environment and run the tests - * docs: this folder includes the user and installation/configuration guide - * testcases: this folder includes the scripts required by Functest internal - test cases - - -Firstly run the script to install functest environment:: - - $ ${repos_dir}/functest/docker/prepare_env.sh - -NOTE: ${repos_dir} is a default environment variable inside the docker -container, which points to /home/opnfv/repos - -Run the script to start the tests:: - - $ ${repos_dir}/functest/docker/run_tests.sh +.. include:: ./configguide.rst NOTE: This will run ALL the tests by default, see `[2]`_ for details |