Functest Doc: first update for Euphrates

- move part of the dev group to the testing document
- move reporting into user guide
- update logs
- introduce alpine
- introduce functest API
- split documents per chapter

Change-Id: I08268091ce50309e891a648333da2054e902bcea
Signed-off-by: Morgan Richomme <morgan.richomme@orange.com>

1 files changed, 104 insertions, 0 deletions

diff --git a/docs/testing/user/configguide/prerequisites.rst b/docs/testing/user/configguide/prerequisites.rst
new file mode 100644
index 00000000..94f67600
--- /dev/null
+++ b/docs/testing/user/configguide/prerequisites.rst
@@ -0,0 +1,104 @@
+Prerequisites
+=============
+The OPNFV deployment is out of the scope of this document but it can be
+found in http://docs.opnfv.org.
+The OPNFV platform is considered as the SUT in this document.
+
+Several prerequisites are needed for Functest:
+
+    #. A Jumphost to run Functest on
+    #. A Docker daemon shall be installed on the Jumphost
+    #. A public/external network created on the SUT
+    #. An admin/management network created on the SUT
+    #. Connectivity from the Jumphost to the SUT public/external network
+    #. Connectivity from the Jumphost to the SUT admin/management network
+
+WARNING: Connectivity from Jumphost is essential and it is of paramount
+importance to make sure it is working before even considering to install
+and run Functest. Make also sure you understand how your networking is
+designed to work.
+
+NOTE: **Jumphost** refers to any server which meets the previous
+requirements. Normally it is the same server from where the OPNFV
+deployment has been triggered previously.
+
+NOTE: If your Jumphost is operating behind a company http proxy and/or
+firewall, please consult first the section `Proxy Support`_, towards
+the end of this document. The section details some tips/tricks which
+*may* be of help in a proxified environment.
+
+Docker installation
+-------------------
+Docker installation and configuration is only needed to be done once
+through the life cycle of Jumphost.
+
+If your Jumphost is based on Ubuntu, SUSE, RHEL or CentOS linux, please
+consult the references below for more detailed instructions. The
+commands below are offered as a short reference.
+
+*Tip:* For running docker containers behind the proxy, you need first
+some extra configuration which is described in section
+`Docker Installation on CentOS behind http proxy`_. You should follow
+that section before installing the docker engine.
+
+Docker installation needs to be done as root user. You may use other
+userid's to create and run the actual containers later if so desired.
+Log on to your Jumphost as root user and install the Docker Engine
+(e.g. for CentOS family)::
+
+ curl -sSL https://get.docker.com/ | sh
+ systemctl start docker
+
+ *Tip:* If you are working through proxy, please set the https_proxy
+ environment variable first before executing the curl command.
+
+Add your user to docker group to be able to run commands without sudo::
+
+ sudo usermod -aG docker <your_user>
+
+A reconnection is needed. There are 2 ways for this:
+    #. Re-login to your account
+    #. su - <username>
+
+References - Installing Docker Engine on different Linux Operating Systems:
+  * Ubuntu_
+  * RHEL_
+  * CentOS_
+  * SUSE_
+
+.. _Ubuntu: https://docs.docker.com/engine/installation/linux/ubuntulinux/
+.. _RHEL:   https://docs.docker.com/engine/installation/linux/rhel/
+.. _CentOS: https://docs.docker.com/engine/installation/linux/centos/
+.. _SUSE: https://docs.docker.com/engine/installation/linux/suse/
+
+Public/External network on SUT
+------------------------------
+Some of the tests against the VIM (Virtual Infrastructure Manager) need
+connectivity through an existing public/external network in order to
+succeed. This is needed, for example, to create floating IPs to access
+VM instances through the public/external network (i.e. from the Docker
+container).
+
+By default, the four OPNFV installers provide a fresh installation with
+a public/external network created along with a router. Make sure that
+the public/external subnet is reachable from the Jumphost.
+
+*Hint:* For the given OPNFV Installer in use, the IP sub-net address
+used for the public/external network is usually a planning item and
+should thus be known. Consult the OPNFV Configuration guide `[4]`_, and
+ensure you can reach each node in the SUT, from the Jumphost using the
+'ping' command using the respective IP address on the public/external
+network for each node in the SUT. The details of how to determine the
+needed IP addresses for each node in the SUT may vary according to the
+used installer and are therefore ommitted here.
+
+Connectivity to Admin/Management network on SUT
+-----------------------------------------------
+Some of the Functest tools need to have access to the OpenStack
+admin/management network of the controllers `[1]`_.
+
+For this reason, check the connectivity from the Jumphost to all the
+controllers in cluster in the OpenStack admin/management network range.
+
+.. _`[1]`: https://ask.openstack.org/en/question/68144/keystone-unable-to-use-the-public-endpoint/
+.. _`[4]`: http://artifacts.opnfv.org/functest/danube/docs/configguide/index.html