aboutsummaryrefslogtreecommitdiffstats
path: root/docs/configguide/configguide.rst
diff options
context:
space:
mode:
authorMorgan Richomme <morgan.richomme@orange.com>2016-08-26 13:41:17 +0000
committerGerrit Code Review <gerrit@172.30.200.206>2016-08-26 13:41:17 +0000
commit184c0b96b4216032191602941a47572492a2f916 (patch)
tree60bc0ecad304a34b02fad1c35606f2857fdf1f3f /docs/configguide/configguide.rst
parent007868e4810aaf9a2664b030281fe7c818fc3494 (diff)
parente9876bd337af54883fe46e49343abc22cfd0404f (diff)
Merge "configuration guide review"
Diffstat (limited to 'docs/configguide/configguide.rst')
-rw-r--r--docs/configguide/configguide.rst58
1 files changed, 29 insertions, 29 deletions
diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst
index 6448d2c9..4d0d35b7 100644
--- a/docs/configguide/configguide.rst
+++ b/docs/configguide/configguide.rst
@@ -18,8 +18,10 @@ release installed in your environment. All available tagged images can
be seen from location [FunctestDockerTags_]. For example, when running
on the first official release of the OPNFV Colorado system platform,
tag "colorado.1.0" is needed. Pulling other tags might cause some
-problems while running the tests. If you need to specifically pull the
-latest Functest docker image, then omit the tag argument::
+problems while running the tests.
+Docker images pulled without a tag specifier bear the implicitly
+assigned label "latest". If you need to specifically pull the latest
+Functest docker image, then omit the tag argument::
docker pull opnfv/functest
@@ -32,9 +34,6 @@ following docker command::
opnfv/functest brahmaputra.3.0 94b78faa94f7 4 weeks ago 874.9 MB
hello-world latest 94df4f0ce8a4 7 weeks ago 967 B
-Docker images pulled without a tag specifier bear the implicitly
-assigned label "latest", as seen above.
-
The Functest docker container environment can -in principle- be also
used with non-OPNFV official installers (e.g. 'devstack'), with the
**disclaimer** that support for such environments is outside of the
@@ -121,8 +120,9 @@ recommended parameters for invoking docker container
under the path: '/home/opnfv/functest/conf/openstack.creds'.
WARNING: If you are using the Joid installer, you must pass the
- credentials using the **-v** option. See the section
- `Accessing the Openstack credentials`_ above.
+ credentials using the **-v** option:
+ -v /var/lib/jenkins/admin-openrc:/home/opnfv/functest/conf/openstack.creds.
+ See the section `Accessing the Openstack credentials`_ above.
#. Passing deployment scenario
When running Functest against any of the supported OPNFV scenarios,
@@ -133,7 +133,7 @@ recommended parameters for invoking docker container
-e "DEPLOY_SCENARIO=os-<controller>-<nfv_feature>-<ha_mode>"
where:
os = OpenStack (No other VIM choices currently available)
- controller is one of ( nosdn | odl_l2 | odl_l3 | onos )
+ controller is one of ( nosdn | odl_l2 | odl_l3 | onos | ocl)
nfv_feature is one or more of ( ovs | kvm | sfc | bgpvpn | nofeature )
If several features are pertinent then use the underscore
character '_' to separate each feature (e.g. ovs_kvm)
@@ -143,7 +143,7 @@ recommended parameters for invoking docker container
**NOTE:** Not all possible combinations of "DEPLOY_SCENARIO" are
supported. The name passed in to the Functest Docker container
must match the scenario used when the actual OPNFV platform was
- deployed.
+ deployed. See release note to see the list of supported scenarios.
Putting all above together, when using installer 'fuel' and an invented
INSTALLER_IP of '10.20.0.2', the recommended command to create the
@@ -243,19 +243,20 @@ illustration purposes::
Compass installer local development env usage Tips
--------------------------------------------------
-In the compass-functest local test case check and development environment, in order
-to get openstack service inside the functest container, some parameters should be
-configured during container creation, which are hard to guess for freshman. This
-section will provide the guideline, the parameters values are defaults here, which should
-be adjusted according to the settings, the complete steps are given here so as
-not to appear too abruptly.
+In the compass-functest local test case check and development environment,
+in order to get openstack service inside the functest container, some
+parameters should be configured during container creation, which are
+hard to guess for freshman. This section will provide the guideline, the
+parameters values are defaults here, which should be adjusted according
+to the settings, the complete steps are given here so as not to appear
+too abruptly.
1, Pull Functest docker image from public dockerhub::
docker pull opnfv/functest:<Tag>
-<Tag> here can be "brahmaputra.1.0", "colorado.1.0", etc. Tag omitted means the
-latest docker image::
+<Tag> here can be "brahmaputra.1.0", "colorado.1.0", etc.
+Tag omitted means the latest docker image::
docker pull opnfv/functest
@@ -273,8 +274,8 @@ To make a file used for the environment, such as 'functest-docker-env'::
INSTALLER_IP=192.168.200.2
EXTERNAL_NETWORK=ext-net
-Note: please adjust the content according to the environment, such as 'TENANT_ID'
-maybe used for some special cases.
+Note: please adjust the content according to the environment, such as
+'TENANT_ID' maybe used for some special cases.
Then to create the Functest docker::
@@ -283,8 +284,6 @@ Then to create the Functest docker::
--name <Functest_Container_Name> \
opnfv/functest:<Tag> /bin/bash
-Note: it is recommended to be run on jumpserver.
-
3, To attach Functest container
Before trying to attach the Functest container, the status can be checked by::
@@ -345,6 +344,7 @@ follows::
| |-- __init__.py
| |-- check_os.sh
| |-- config_functest.yaml
+ | |-- generate_report.py
| |-- exec_test.sh
| |-- prepare_env.py
| |-- run_tests.py
@@ -374,12 +374,12 @@ follows::
| |-- results
| `--userguide
|-- testcases
+ | |-- __init__.py
| |-- Controllers
| |-- OpenStack
- | |-- __init__.py
| |-- features
| |-- security_scan
- | `-- vIMS
+ | `-- vnf
`-- utils
|-- __init__.py
|-- functest_logger.py
@@ -694,22 +694,22 @@ docker container.
For example, try to use the **nc** command from inside the functest
docker container::
- nc -v google.com 80
- Connection to google.com 80 port [tcp/http] succeeded!
+ nc -v opnfv.org 80
+ Connection to opnfv.org 80 port [tcp/http] succeeded!
- nc -v google.com 443
- Connection to google.com 443 port [tcp/https] succeeded!
+ nc -v opnfv.org 443
+ Connection to opnfv.org 443 port [tcp/https] succeeded!
Note: In a Jumphost node based on the CentOS family OS, the **nc**
commands might not work. You can use the **curl** command instead.
- curl http://www.google.com:80
+ curl http://www.opnfv.org:80
<HTML><HEAD><meta http-equiv="content-type"
.
.
</BODY></HTML>
- curl https://www.google.com:443
+ curl https://www.opnfv.org:443
<HTML><HEAD><meta http-equiv="content-type"
.
.