Age | Commit message (Collapse) | Author | Files | Lines |
|
pkg.upgrade was enabled for all salt minions, including VCP VMs,
which take longer to perform the operation, probably due to an
older set of packages in the Ubuntu disk image we use.
One way to work around this is to switch to UCA Xenial image, and
let Salt pre-provising salt minion on it, but that adds deploy
time delay and has caused issues in the past (should be ok now).
Alternatively, we can retry the pkg.upgrade until all minions
respond, before moving on with the state execution. This prevents
silently skipping the next salt calls (e.g. installing keepalived).
Note that the issue did not manifest for OVD-DPDK, where after
pkg.upgrade, DPDK is installed, giving VCP VMs enough time to return.
While at it, retry 'salt.control' state apply too (non-critical,
but it fails every once in a while).
Fixes: 87310fb
Change-Id: I97acc2b23206a55d72f7e6583ca42127fdbacc16
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit a6feb158fa5bc16b8d496c785c461c73ca715322)
|
|
- add new patch for maas.region, extending it poorly with a timeout
override mechanism; the new comissioning/deploying timeout defaults
(10/15min) will be used instead of MaaS defaults (20/40min), unless
reclass params are defined with different values;
- add 30s delay between 'machine mark-broken' and 'machine mark-fixed'
MaaS cli commands (fixes a rare race condition);
- fix forgotten replace in 'maas.pxe_route': s/opnfv_fuel_/opnfv_/g;
Change-Id: I71c562b80031bac2793dd470d52928c2d62e5300
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit 01e94712d75c0a1cf7585f0ed380dd9a3967274e)
|
|
MaaS node does not need to be exposed to the public network; instead
the management IP should be enough to access the MaaS dashboard.
So, drop 'infra_maas_node01_external_address' reclass param, together
with its OPNFV PDF param, 'opnfv_infra_maas_node01_external_address'.
This allows us to move compute public IPs back to .{2,3} instead of
.{101,102}, where we moved them during 'pod_config.yml' addition.
While at it, fix a minor duplicate 'name' param for 'br-mgmt' bridge
on kvm nodes.
Change-Id: Ie9fcf5924d7aa37b666f42c968687d73b51a8278
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit ee4d89f2803085bdd4a7f3b365e40ec9366c25a9)
|
|
PDF compatible reclass support moved the MaaS IPs from .2 to .3.
However, the runtime template was not updated accordingly, leading
to mismatches between IP addresses. Until all scenarios support
pod_config, we can't apply the IP change correctly, so revert it.
Change-Id: I34e42ec06dd9fd4f69bd7c91dbe068a4f83b3e62
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit 187d1c87dfcc86a6b36dfca2c061144dab35bd4d)
|
|
|
|
|
|
Occasionaly, MaaS fails to provision/deploy some nodes, in which
case we try marking them as broken, then fixed (to put them again
in 'ready' state); before re-attempting the MaaS deploy operation.
However, this leads to 'Error: Internal server error' when deploy
function is called right after transitioning the node to 'ready'
state.
Add a delay of 30 seconds before re-attempting the failed operation.
Change-Id: Ia9ecec67639387e4a29feab3114e1741c554a2cb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit 39ffab99ad34ff45c0ed8be5a8172106e6a819a5)
|
|
* [baremetal] add memory to contollers & salt master
* tune up sysctl vm.dirty* for compute nodes
* upgrade packages to get the latest versions
(https://bugs.launchpad.net/cinder/+bug/1641312)
Change-Id: I9ad22206f2f3f11e1da3f93c7a0931c592adf1cf
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit 87310fb8edfe49b9621fe4410ae52d989072e3c5)
|
|
Implementation for baremetal-mcp-ocata-ovs-ha scenario
JIRA: FUEL-275
Change-Id: Id6ab5697f993ac9faa019c3c10ba4ed4b7b6db01
Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
(cherry picked from commit 5c0a09fbd0f377df56bfcfe94b262225a34f98ff)
|
|
Change-Id: Iedb9a57f7ed4b7483bf629225fb2f3470e7de97e
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit 80024618fbda8422ba758d667073ad07c6f69542)
|
|
Change-Id: If2e3736af02bb0ca53667116377f2fed4385b048
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Employ 2Mb hugepages for physical computes as well
since functest suite uses less than 1Gb memory flavors.
Change-Id: I7e96dd73df7d9e7274247b4faba15ee9bd362e40
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Ib4d787c45434243d0dc29d517a73224cf4f9d1c1
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
|
|
Live-migration feature requires shared storage on compute nodes,
so configure glusterfs volume for nova instances.
Change-Id: Id6b9b5aad89f5b4aefbef71e4ba7247a441873b0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Id0303d217dbe71e4b04834e545feae0660172b23
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Configure nfs shared storage for nova instances
to support live migration feature.
Change-Id: I777d5725e45d03325507d3ecc8dd59a28cbc188f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Change-Id: I8ebe4dedb9601ae0f45922fd30a34c67382755fc
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
mcpcontrol virsh network, as well as MaaS PXE network are installer
specific, and not POD specific.
Therefore, these should be easily parametrized without the PDF,
using only installer inputs (e.g. env vars passed via Jenkins).
- add new <all-mcp-ocata-common.opnfv.runtime> reclass class;
- parametrize at runtime new reclass class based on global vars;
- factor out MaaS deploy address / config using new mechanism;
- parametrize at runtime virsh network definitions based on template;
- add new "maas.pxe_route" sls for configuring routing on cfg01;
- replace env vars with the new sls in "maas" state;
NOTE: baremetal parametrization will be handled later.
Change-Id: Ifd61143d818fb088b3f4395388ba769bbc49156e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
The <salt-master-init.sh> script default to using stable 2016.3
version of Salt via BOOTSTRAP_SALTSTACK_OPTS.
However, since we manually add the 2016.11 repos beforehand, the
correct version (2016.11) ends up being installed.
This change merely drops one uselss repo from salt master apt sources.
While at it, use HTTPS for repo.saltstack.com DEB repository.
Since we already add the repo to apt sources via <user-data.sh>,
pass "-r" on all architectures, skipping repo (re)addition.
Change-Id: I7fbe0b646b2f2a8e952718a61ff8c180116f8f27
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Use INSTALLER_IP Jenkins param instead of SALT_MASTER_IP, allowing
us to drop SALT_MASTER_IP completely from releng.
mcpcontrol IP changes:
- 192.168.10.100 becomes 10.20.0.2 (align with legacy Fuel master);
- 192.168.10.3 becomes 10.20.0.3 (baremetal MaaS address);
JIRA: FUEL-285
Change-Id: I6e2d44c3a8b43846196bd64191735214167a76ce
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* changes:
reclass: virtual: Factor out VM interface naming
reclass: Multiarch support for arch specific param
|
|
Define two groups of VM interface naming:
- ens3..ens6 - used by infra VMs, virtual node VMs;
- ens2..ens3 - used by VCP VMs (spawned by salt.control);
Parametrize newly defined interface names throughout the cluster
models.
While at it, add AArch64 default values for above iface names.
NOTE: baremetal clusters will be parametrized later, after common
config is factored out into <baremetal-mcp-ocata-common>.
Change-Id: I89aba9aaf85b585cc510302eb76d7810fbf60679
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Introduce a simple mechanism that simulates an 'if-arch-then' cond
for reclass models:
- add new <all-mcp-ocata-common> class hierarchy;
- at runtime (via <salt.sh>) make 'all-mcp-ocata-common.arch' point
to 'all-mcp-ocata-common.$(uname -i)' dynamically;
- inherit new 'arch' class in all cluster models;
- factor out current x86_64 default for "salt_control_xenial_image";
- add AArch64 default for param "salt_control_xenial_image";
Change-Id: I3b239b28d0fd1cc2ced8579e2e93b764eb71ffc3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I176f583e8adb7ba717932de7c27283f696ded548
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
|
|
|
|
|
|
Rename all variations of README files to README.rst.
Fix license headers according to OPNFV Contribution Guidelines [1].
Markdown syntax will be switched to rst in an ulterior change.
[1] https://wiki.opnfv.org/display/DEV/Contribution+Guidelines
Change-Id: I2c71fd62b38f218545507c79c39e07dbd35f7c88
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-274
Change-Id: Ia77948ba3e99c47aa86fcca20c67d80e2e761208
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Move scenario defaults.yml out of virtual/baremetal dirs, unifying
them into a single, arch-specific defaults configuration file.
Add AArch64 equivalent config, and arch-qualify default filename.
For AArch64, bump VCPU number from 2 to 6.
Change-Id: If9b39850af96e4c46e868b1d532bd301f9fd9f26
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I669a81cf46a4ac988a1ea04c3b9d297ae67a0a62
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Bring back <ci/deploy.sh> parameter `-L`, which is already passed by
releng deploy script.
Since we need to enable file_recv on salt master, do so by adding a
new class in <virtual-mcp-ocata-common/infra/config.yml>, which will
be inherited by all scenario reclass models.
JIRA: FUEL-288
Change-Id: I9b649315984fb8580b63883d0e06c1e1efd11057
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Fix/silence all shellcheck errors, except for scripts in
<prototypes/sfc_tacker>.
Change-Id: Idc317cdba0f69b78299f2d3665e72ffc19dd8af5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
* add vcpus to virtual compute
* re-pin dpdk core & pmds
* switch to UCA repos
* disable apt-daily cron job
Change-Id: Ia23100b846d8954e3d5e8a264a6b8518402b2fa6
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
While executing the deploy script via sudo will raise no issues with
re-using old storage volume files, non-root deploys fail to change
ownership of said files.
Properly clean after ourselves when destroying and undefining VMs.
JIRA: ARMBAND-311
Change-Id: I7fdd269dccbfd5ab5285d852ac7dacfc4dc5ccd7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-280
Change-Id: I1e07b0e1597b2a1e4a92e1274f89dda62cb81bb8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
* wait for mongodb service ready state
* run rs.initiate() to start a replication set
Change-Id: Ia9d2357d2ce0e9ba92a6be3d8b6c068efaa10822
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
In order to avoid SubjectAltName warnings,
bring it into proxy ssl certificate.
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
Change-Id: I46fe9697469354bc028039cc1f030baae1ccd7fb
|
|
JIRA: FUEL-279
Change-Id: Ia8bed5e09937a1ffd29a15d40f610d4b0c8f0a17
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Ibcc4364a57d888773fcb466f603c2046e1a4a2e3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|