summaryrefslogtreecommitdiffstats
path: root/mcp/scripts
AgeCommit message (Collapse)AuthorFilesLines
2018-01-30[patch] Group APT calls for salt formula installAlexandru Avadanii1-2/+3
When installing salt-formula-* on cfg01, we used to call APT for each package. Instead, handle them all at once. While at it, stop using colored output on terminals that don't support it (e.g. 'vt220' used by OPNFV Jenkins). Change-Id: Ib8f2cee9638c43cdf648487bf05b07cd49802d3e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-29Merge "[FN VMs] remove graphics"Alexandru Avadanii1-10/+2
2018-01-29Merge "[cfg01] apt.conf.d: Dpkg::Use-Pty: 0"Michael Polenchuk1-0/+1
2018-01-29[FN VMs] remove graphicsAlexandru Avadanii1-10/+2
Since VCP VMs (created via salt formula) do not have a video controller defined in their domain XMLs, network devices end on different PCI slots and hence have different names assigned (ens2+ vs foundation node VMs, which start with ens3). To align network interface names for VMs on jumpserver vs kvm nodes, and reduce confusion, remove the video controller from FN VMs. This allows some cleanup: - drop extra AArch64 args from virt-install; - unify 'opnfv_vcp_vm_*' and 'opnfv_fn_vm_*' variables; Change-Id: I0d108b00914b3eaaa03b67c652174f8ed4573118 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-28[cfg01] apt.conf.d: Dpkg::Use-Pty: 0Alexandru Avadanii1-0/+1
This will silence all 'Reading database ...' noise during Salt formula installation. Change-Id: I734d727194e276443db1e1581f40ec494562196e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25lib.sh: Reduce useless wget dot reportingAlexandru Avadanii1-1/+1
Downloading the base image (usually a few hundred MB) outputs a lot of useless dots to show progress. Switch to 1M per dot (from 1K). Change-Id: I8c525cad0b46e8ba3a7f6da4dd7f8277a49df91f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25Merge "Add support for different public network netmask"Alexandru Avadanii1-0/+7
2018-01-25Merge "[lab-config] Use Pharos submodule by default"Alexandru Avadanii1-0/+0
2018-01-24[lab-config] Use Pharos submodule by defaultAlexandru Avadanii1-0/+0
- switch from securedlab to pharos as lab-config structure; - accomodate the move net_config from PDF to IDF in j2 templates; Change-Id: Ib04e4fb384568a6efd9e78a080857b663521ae88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22Add support for different public network netmaskGuillermo Herrero1-0/+7
- Remove hardcoded /24 mask - Use PDF as source for public network, with reclass params: opnfv_net_public, _mask, _gw, _pool_start, _pool_end JIRA: FUEL-315 Change-Id: Idf3a4ed8f63f58fa90d9c1dcb7751ef3b1c9bd36 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-01-21reclass: apt_mk_version: stableAlexandru Avadanii1-1/+1
Although previous commit d1b6119 changed the first reference of apt-mk repos to 'stable' from 'nightly', it missed the cluster model. This fixes redeploys with `-f`, which fail due to conflicts between already installed 'stable' packages and 'nightly' ones. Fixes: d1b6119 Change-Id: I854bac86feaaa61da0b68d158e270eec1ee0ccb7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-08Merge "[centos jump] Add missing dependency for nbd build"Alexandru Avadanii1-0/+1
2018-01-08[centos jump] Add missing dependency for nbd buildAlexandru Avadanii1-0/+1
Change-Id: Icb23d2e6d3bb6e49b54e2d51cc8a35cb03702fcd Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-08lib.sh: base image: Prevent using incomplete imgAlexandru Avadanii1-4/+4
In case the previous deploy attempt already copied the base image as the VCP image in order to perform offline operations and failed, leaving an incomplete image in place, current code might try to use it instead of building it from scratch. Use the hash-agnostic link names as checkpoints for successful image handling. Change-Id: I1e99e515e18ba1dec534c520811c127b2b528afe Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-08lib.sh: Fix `modprobe -f` on UbuntuAlexandru Avadanii1-3/+4
For some reason, `modprobe -f` for a clean nbd module (from vanilla Ubuntu) fails with exec format error randomly, while a simple `modprobe` works. Change-Id: I79785e510cab757e2482baf442054be984c24019 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-07lib.sh: Fix stop condition in wait_forAlexandru Avadanii1-5/+5
Change-Id: Ida693b6dd328db283d6992ac33500f4dd1a73eb8 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-07salt.sh: Fix linux state apply on cfg01Alexandru Avadanii1-4/+4
cfg01 does not repond or is not connected while trying to apply linux state via salt.sh, use wait_for macro to account for this. JIRA: ARMBAND-315 Change-Id: I2d4c63d43f806b65f9ce327f4a00a6334be88750 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-07lib.sh: Extend wait_for function to catch no respAlexandru Avadanii1-3/+11
wait_for function should be able to also check for minions that did not return or not respond, in addition to the return code. To keep it backwards compatible, condition the new check on the max attempt number being specified in decimal format (e.g. '10.0' unlike old '10'). Change-Id: If2512cf9121cdd795638efe7362ef0485d4e8d91 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-07user-data.template: Remove salt-minion installAlexandru Avadanii2-12/+1
salt-minion is now pre-provisioned inside the image using qemu-nbd. Revert "lib.sh: Limit envsubst to certain variables" This reverts commit 3a76d07dbd409b781abdb8520f55a1b20edf07db. Change-Id: Icceb8bcf439e28ab01c7731c3602c1113290454d Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-07lib.sh: Cache base image(s) between deploysAlexandru Avadanii1-13/+36
Fingerprint and re-use base image artifacts. Change-Id: Ic7a73c04e27d25addd50e4e9880619a0028956d3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-06deploy.sh: Print sysinfoAlexandru Avadanii3-0/+20
JIRA: FUEL-323 Change-Id: I0dcbcfbedc7e9ef013ca50dcc08f804323f91701 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-04[centos jump] nbd build: Fix REQ_TYPE_SPECIALAlexandru Avadanii1-1/+5
Change-Id: Ia514418d2aae1b4f7e752d4610fa6c9829c67e51 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-04[centos jump] Add nbd build supportAlexandru Avadanii2-4/+74
RHEL distros do not maintain nbd, so add a best-effort function to build it on the fly. Change-Id: Ie0419f0fed8a0b12f6b878b3093d6ca34f72d140 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-04requirements_rpm: Add epel-release, nbdAlexandru Avadanii1-0/+2
qemu-nbd requires the 'nbd' kernel module, which is not available by default on CentOS 7, but is available from EPEL repo. Change-Id: I3e8f722d31a97293b077115499a97c93a4751917 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-03[baremetal] Switch VCP base image to UCAAlexandru Avadanii2-0/+0
Since Mirantis prebuilt image comes with salt-minion 2016.3 instead of 2016.11 and upgrading it leads to a hard to break catch-22, use the Ubuntu cloud archive image we already download for FN VMs and pre-install: - a newer kernel (hwe-edge); - salt-minion (2016.11); This also implicitly aligns the image handling on AArch64 and x86_64. Change-Id: I86d1c777449d37bdd0348936a598e3ffe9d265af Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-30salt: Use apt-mk 'stable' distributionAlexandru Avadanii1-1/+1
'nightly' repo dist from apt-mk is broken, so switch to 'stable'. Change-Id: Ie12dfc2a499910b8b98a63886ba16044e66435f5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-27lib.sh: Add delay after `kpartx -av`Alexandru Avadanii1-0/+1
On rare occassions, mapper bindings created by kpartx take longer to show up, leading to errors when we try to mount them on. Bring back the hardcoded delay to bypass such issues. Change-Id: Ib386c04fc55cd85235a2156dba08fda378e4cdfd Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-18Merge "[baremetal] Move salt master IP to PXE/admin"Alexandru Avadanii1-4/+3
2017-12-18Merge "salt.sh: Use salt-call to apply linux sls on cfg01"Michael Polenchuk1-1/+1
2017-12-18Merge "[baremetal] MaaS: Fix DHCP dynamic reserved range"Michael Polenchuk1-0/+0
2017-12-18[baremetal] Move salt master IP to PXE/adminAlexandru Avadanii1-4/+3
Use PXE/admin network for salt traffic from/to all minions except cfg01, mas01. This allows us to drop the route to admin net from cfg01. Change-Id: Ic2526f1ff77afe5d92ced900971f4c8f78d2d8a2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-18salt.sh: Use salt-call to apply linux sls on cfg01Alexandru Avadanii1-1/+1
Also, retry applying linux high state up to twice, due to rare spurious failures with 'No reponse' status. Change-Id: Ic7839a5c9501673cb127412136afb91e05f87a7e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-18[baremetal] MaaS: Fix DHCP dynamic reserved rangeAlexandru Avadanii1-0/+0
- patch MaaS to default to `DHCP` instead of `AUTO` for physical PXE interfaces (all IPs will be handed out by MaaS DHCP *inside* the defined dynamic DHCP IP range); - reduce range to silence bogus MaaS warning about address exhaustion; - regenerate pod_config.yml.example to reflect the changes; - drop `opnfv_infra_maas_pxe_address` (duplicate of `opnfv_infra_maas_node01_deploy_address`); - add `opnfv_infra_config_pxe_address` for future usage; - while at it, fix missing patch copyright; JIRA: FUEL-316 Change-Id: I81fad333e77f7c8508cd2b2b267c7b39c130e3e1 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-15ci/deploy.sh: maas: cleanup_uefi on env eraseAlexandru Avadanii1-2/+3
Running `ci/deploy.sh -EE` should also perform an UEFI boot option cleanup, otherwise we risk booting the previously installed OS. While at it, reduce delay between nodes removal and fix a rare failure for `-EE` when no nodes are defined in MaaS. Change-Id: I789ffd3e22545921216f7d5ee3509c76354542eb Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-12deploy.sh: Factor out pkg deps into yaml filesAlexandru Avadanii2-0/+70
Instead of hardcoding the packages to install on the jumphost at deploy time in `ci/deploy.sh`, move the requirements list to a dedicated yaml file, so it is decoupled from actual code. While at it, add missing deps: - ipxe-qemu (AArch64 Ubuntu only); Change-Id: I9ee5c0796b70f9d29427d608b6415333c8841e1e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-11[baremetal] Move all MaaS PXE net config to PDFAlexandru Avadanii1-3/+0
- s/opnfv_maas_pxe_/opnfv_infra_maas_pxe_/g to align with other vars; - patches: pharos: Add MaaS PXE network to installer adapter; - runtime.yml{,.template}: move to installer adapter, update pod_config.yml example; - drop MAAS_PXE_NETWORK global env var, now read strictly from PDF; JIRA: FUEL-313 Change-Id: I46d7510bd53fba7890c411d36bc28fd6ff6f3648 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-11patches: pharos: Bump & drop upstream patchesAlexandru Avadanii1-0/+0
All our staged patches for Pharos repo are now upstream, so bump the git submodule and remove the patch files. Change-Id: I0d68eb3bdd9abfa286c3640acc1f13ce6100801d Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-09submodule: pharos: Bump to fix run without eyamlAlexandru Avadanii1-0/+0
Most Fuel PODs do not use encrypted PDFs, so bump Pharos git submodule to include updated `generate_config.py` to silently skip decryption in case eyaml is not installed. Change-Id: I845a32c7001123a93e38197e0daf53d18c797aed Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-08[baremetal] PDF: Use net_admin for MaaS PXE netAlexandru Avadanii1-1/+1
While at it, fix another small issue where a variable (parameters__param_opnfv_maas_pxe_address) was used without being populated (defined in 'runtime.yml', which is not read using `parse_yaml`, like the scenario yml or the PDF expanded class, pod_config.yml). JIRA: FUEL-313 Change-Id: Iee88601d5420f55572bf90c8cf330afbedfb2e21 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-07patches: pharos: Drop patches merged upstreamAlexandru Avadanii1-0/+0
Also, remove redundant pharos patch that adds prx mgmt IPs: - "Re-assign mgmt network to proxy nodes" as those values are set already (to different values!) by patch: + "extend public gateway support" While at it, `make patches-export` should clean the patch dir first. Change-Id: Ice106e5d48c7b4cd90ffc6af7441199034d4f546 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-07Merge "base image: Explicitly call kpartx"Michael Polenchuk1-3/+7
2017-12-07Merge "lib.sh: persistent cfg01, mas01 mcpcontrol"Michael Polenchuk1-2/+2
2017-12-01salt.sh: Force ocata link creationAlexandru Avadanii1-1/+1
Required for re-deploying with `ci/deploy.sh -f`. Change-Id: I8e6d95f17f57b9dab3257fb4c8ccd1f962dacb45 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-29Merge "AArch64: base image: pre-install salt-minion"Michael Polenchuk2-2/+8
2017-11-28[virtual] Update openstack version to pikeMichael Polenchuk1-1/+5
Change-Id: I1df0228cb44bf9122aaf93dd25fc16a0d26a5240 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-11-28base image: Explicitly call kpartxAlexandru Avadanii1-3/+7
qemu-nbd currently available in CentOS 7 does not add partition mappings automatically for NBD devices, so add explicit `kpartx` calls. Change-Id: Ifa79c89b82024602b782c449dbf4de10899e03b5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-27lib.sh: persistent cfg01, mas01 mcpcontrolAlexandru Avadanii1-2/+2
cfg01, mas01 DHCP leases in mcpcontrol virtual network should be persistent (if cfg01 IP changes, minions can't find Salt Master). Change-Id: I497207ebe1537af94fd92de12491664d17ad3144 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-27AArch64: base image: pre-install salt-minionAlexandru Avadanii2-2/+8
While at it, rename apt repo in foundation node user-data template from "salt" to "saltstack", to align with reclass model naming. Change-Id: I5b216492349ae187b568884b1ab4046c52b1c6b2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-27Add pre-{install,purge} support for base imageAlexandru Avadanii2-5/+144
Extend <lib.sh> and its invocation from <ci.deploy.sh> with support for modifying foundation node VMs base image prior to using it with: - additional APT GPG keys; - additional APT repos; - packages to pre-install; - packages to pre-remove; - (non-configurable) cloud init datasource via NoCloud only, so VCP VMs won't wait for metadata service; While at it, re-use the resulting image as a base for another round of pre-patching (same operations as above are supported) to provide a base image for VCP VMs. Add AArch64-specific configuration based on new mechanisms: - pre-install linux-image-generic-hwe-16.04-edge (and headers) for foundation node and VCP (common) image (also requires new repo and its key); - pre-install cloud-init for VCP image (it should already be installed, but script needs non-empty config for VCP to create the VCP image and transfer it over to Salt Master); NOTE: cloud-init is required on VCP VMs for DHCP on 1st iface. JIRA: FUEL-309 Change-Id: I7dcaf0ffd9c57009133c6d339496ec831ab14375 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-11-23salt.sh: Rework `git -C` for older git compatAlexandru Avadanii1-1/+1
CentOS 7.4 provides git 1.8.3, while `git -C` support was introduced in 1.8.5, so rework <salt.sh> to not rely on this parameter. Change-Id: Ied88466b2b3d91a3317922fa08f60afe934358a0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>