| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change-Id: I8fdc24130b3887defc2d7b53f94530f71b28aa02
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I698d97f3dbf8cdbe7002c5e4b02ac1a51dacdbfb
Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
|
|
Drop duplicate maas:machines definitions which could cause conflicts
in rare corner cases.
Slightly refactor j2 template expansion to make `conf.virtual.nodes`
available during first stage.
Change-Id: I04d56e346b12c6eb97da5c0c0ab1e3446e5fc1b8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Due to design limitations in idf.net_config, for a hybrid POD we need
to trunk certain network segments for the VMs running on the
jumpserver, including mgmt network going to cfg01, mas01.
Add mgmt VLAN support for cfg01, mas01 gated by a flag in IDF:
idf.fuel.jumphost.trunks.mgmt: True
JIRA: FUEL-338
Change-Id: I6903f9b70e5f8a88618bce28e21c7c0631a05065
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I77859a2670e07668913232d482853d77cfc8b149
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Ic6705c64dd3582b562e96ff79fd7fc83789533a6
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- noha: 'accept_policy: open_mode' to align with ha scenarios;
- s/cmp01/cmp001/g to align all scenarios and allow code reuse;
- rename network params: s/dhcp/mcpcontrol/g, cleanup;
- computes XDF data: drop 'opnfv_*' layer of params, cleanup;
- local vPDF: add comments with default roles by node index;
- parameterize all netmasks;
- drop unused address/netmask for 'proto: manual' interfaces;
- virsh_net: cleanup definitions, remove hardcodes, align IP on
jumpserver and DHCP range with MaaS for pxebr;
- maas: parameterize hardcoded '/24' cidr for PXE/admin, refactor
maas.region.machines parameterization;
- merge <all-mcp-arch-common/infra/config_*pdf.yaml.j2> templates;
- move reclass.storage definitions of compute nodes to common dir;
- drop 'openstack_compute_*' reclass params in favor of expanding
them via j2 directly in reclass.storage params;
- adopt `nm.cluster.has_*_nodes` where possible;
- obsolete `runtime.yml` from reclass model;
- refactor arch-specific reclass param selection;
- remove unused defaults in favor of mandatory IDF properties;
- noha: prepare for baremetal node support in cinder_lvm_devices;
- interfaces: add interface_mtu and 'noifupdown: true' everywhere;
- interfaces: use j2 macros to generate eth/vlan config;
- states cleanup: remove DHCP route disable workaround on prx/cmp;
- allow configuring NTP servers via:
`idf.fuel.network.ntp_strata_host{1,2}`;
- ovs_bridge: Allow setting gateway, dns-nameservers
- apache: Adjust module list for novcp class inheritance;
- glusterfs PPA: pin with same prio of MCP repos for novcp scenario;
JIRA: FUEL-319
JIRA: FUEL-326
JIRA: FUEL-337
Change-Id: Ia6ad64ba8cade85a75fb22c9a2505decc3834360
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
This bump also brings in:
- arm-pod{8,9} config;
- UNH lab config;
- NTP config in IDFs for existing PODs;
- basic vPDF support;
Change-Id: Ifc16616bc8a13de2bdf048971448d4853e93880e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I4942a1c3e12db304db11fbc231ca26ff87e3b6bb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Instead of hardcoding the VLAN ranges in reclass, read them from IDF.
This is required when VLAN segmentation is used instead of VXLAN, as
lab switches should be configured appropiately (e.g. Armband PODs use
VLANs 2000+ instead of 1000-1030).
Change-Id: I009ccea9b328c40f055a745791eafe3393b96390
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Ib5f7a9d7874704b11b10cdc1eefaae19de2a629e
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
Bring in arm-pod5 hugepage configuration et al.
Change-Id: If8a2f9cd84b400c5a8a58fe477f8ef7a12c42bf8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- move mgmt start to .10;
- move public start to .100;
- sync local idf-pod1;
JIRA: ARMBAND-365
Change-Id: I5d93c4f486daf280d8bdbe92f5aa7edd8d020db0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- submodule: bump Pharos to pick up installer adapter support, as well
as IDF updates for Ericsson baremetal pod1;
- labs/local/virtual: Bump mgmt, public networks start addresses from
.1 to .10, similar to ericsson-pod1;
While at it, drop patch now upstream and instead adopt the new param
'neutron:server:root_helper_daemon'.
JIRA: FUEL-351
Change-Id: I9bc244a7fd8698861a390ed2b6a27804be46c285
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I9e71d9006bad53cc79805ed9255b53b6c5705725
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- bump Pharos git submodule for j2 'do' extension + batch mode;
- adopt j2 'do' in our templates;
- use int filter for 'native' vlan check;
- lib.sh: adopt `-i` to remove `ln` hack for net_map.j2;
- lib.sh: adopt `-b` to speedup template parsing;
NOTE: Bumping Pharos will also bring in the latest changes in
pod_config.yml.j2, which include massive IP shifts and updates.
JIRA: FUEL-335
Change-Id: I7d3a997b3d8659d5f09f867870fb3a148c1ec6df
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I8d526d51a3e18652c59bad9d7c3c384aa6583566
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Now we explicitly add a LVM PV on /dev/sda{1,2} for Cinder storage,
so we can safely drop the patch disabling LVM volume filtering.
If we later move the PV to a different disk, we can just add the VG
and LV definitions to linux:storage via reclass, and Salt will skip
setting them up (as they're already created by MaaS), yet keep the
filtering sane.
While at it, fix 'nova_cpu_pinning' param expr; constructs based on
reclass interpolation (e.g. '${_param:x}') do not work when
parameters are passed via reclass.storage templating, so change
reclass interpolation syntax with classic YAML anchors.
Fixes: 672ae12
Change-Id: Ieb41635ddeb630543d7e4d1079f45d636d9a43af
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- node-specific parameters (nova pinning, hugepages, dpdk) should be
configurable via IDF, on a per-node basis;
- keep default settings for lf-pod2, with and without DPDK,
override them for virtual deploys via local-virtual1 IDF;
- leave neutron_tenant_* vars hardcoded for now, as they are required
on both ctl and cmp nodes - this way we'll deal stricly with
cmp params, so we can nicely pass them via config.yml to reclass
per-node (and not per-role), allowing mixed computes later;
- add compute params for ovs/odl-noha, preparing them for
deployment on baremetal later.
JIRA: ARMBAND-343
Change-Id: I89a58b9565679ab3882d85f07ae817690ae85c67
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
On systems with more than 2TB on /dev/sda, MaaS automatically creates
a 1MB partition with bios_grub label as /dev/sda1.
Account for this and expect rootfs to reside on /dev/sda2 (assume
all compute nodes have the same behavior wrt this issue).
Ideally, later we will switch to explicit partitioning via MaaS, or to
a new baremetal provisioner like Ironic.
Requires bumping Pharos git submodule to pick up the new j2 filter.
Fixes: f6f8a56
JIRA: FUEL-330
Change-Id: I12f5046cf69bf2f52c8b8dc331b90048df643646
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Bump Pharos git submodule to pick up support for MaaS timeout
parameterization, as well as new IDF for lf-pod2.
Drop arch-specific MaaS timeouts, as they are now configurable
on a per-POD basis.
Sample usage (via IDF):
idf:
fuel:
maas:
# MaaS timeouts (in minutes)
timeout_comissioning: 10
timeout_deploying: 15
Change-Id: I8fafa336b0bc64d705f6c2e40fc3dfb85672fb15
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- switch from securedlab to pharos as lab-config structure;
- accomodate the move net_config from PDF to IDF in j2 templates;
Change-Id: Ib04e4fb384568a6efd9e78a080857b663521ae88
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- patch MaaS to default to `DHCP` instead of `AUTO` for physical
PXE interfaces (all IPs will be handed out by MaaS DHCP *inside* the
defined dynamic DHCP IP range);
- reduce range to silence bogus MaaS warning about address exhaustion;
- regenerate pod_config.yml.example to reflect the changes;
- drop `opnfv_infra_maas_pxe_address` (duplicate of
`opnfv_infra_maas_node01_deploy_address`);
- add `opnfv_infra_config_pxe_address` for future usage;
- while at it, fix missing patch copyright;
JIRA: FUEL-316
Change-Id: I81fad333e77f7c8508cd2b2b267c7b39c130e3e1
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
All our staged patches for Pharos repo are now upstream, so bump
the git submodule and remove the patch files.
Change-Id: I0d68eb3bdd9abfa286c3640acc1f13ce6100801d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Most Fuel PODs do not use encrypted PDFs, so bump Pharos git
submodule to include updated `generate_config.py` to silently
skip decryption in case eyaml is not installed.
Change-Id: I845a32c7001123a93e38197e0daf53d18c797aed
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Also, remove redundant pharos patch that adds prx mgmt IPs:
- "Re-assign mgmt network to proxy nodes"
as those values are set already (to different values!) by patch:
+ "extend public gateway support"
While at it, `make patches-export` should clean the patch dir first.
Change-Id: Ice106e5d48c7b4cd90ffc6af7441199034d4f546
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
cloudify vnf requires public enpoints to be available from instance
with manager, so connect nodes w/ nginx to routed public network.
JIRA: FUEL-286
Change-Id: Id0caa699519b9b46dad51deac6955afe6a0050de
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
- minor refactor of runtime templates parsing to allow var expansion;
- parse <pod_config.yml> into shell vars, match dynamically networks
from PDF to IP addresses on bridges of current jumphost;
- keep old '-B' parameter in <ci/deploy.sh>, use it for providing
fallback values in case there's no bridge name specified via IDF
and no IP on the jumphost for one or more of the PDF networks;
- re-enable dry-run to ease testing of the above;
- add sample 'idf-pod1.yaml' to <mcp/config/labs/local>;
The new behavior will try to determine the jump host bridge names:
1. Based on IDF mapping, if available
2. Based on PDF network matching with IP addrs on jumphost;
3. Fallback to values passed via '-B';
4. Fallback to default values hardcoded in the deploy script;
Later, we will drop MaaS network env vars in favor of PDF vars,
once the PDF template is generating them.
Change-Id: If9cd65d310c02965b2e2bfa06a0d7e0f97f1dd48
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I658c1dfeb369adf74038abd0ce1b593d40303527
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- add new git submodule pointing to OPNFV Pharos;
- use Pharos 'generate_config.sh' to parse the PDF using the Fuel
installer adapter and generate <pod_config.yml> dynamically;
- build <pod_config.yml> outside current git repo and sync separately
to prevent sensitive data leak;
- add <pod1.yaml> PDF sample based on LF-POD2, should be used with
'ci/deploy.sh -l local -p pod1';
Change-Id: I4e1b95f180bcd5ade5d86f516628eb8edbe64b1c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
Alexandru Avadanii
Guillermo Herrero
Cristina Pauna
Michael Polenchuk