summaryrefslogtreecommitdiffstats
path: root/mcp/reclass
AgeCommit message (Collapse)AuthorFilesLines
2018-02-17Merge "reclass: maas: Dynamic machine definitions"Alexandru Avadanii2-56/+31
2018-02-16Set nova disk cachemodes to file directsyncMichael Polenchuk3-1/+5
Set nova/libvirt disk cache modes to file directsync to bypass the host page cache & prevent instance's kernel panic due to absent /dev partition. Caching mode directsync effectively turns all guest I/O operations into direct I/O operations on the host, which is the NFS client (virtuals) or GlusterFS (baremetals). Also return back to hwe kernel as a golden mean between GA & Edge ones. Change-Id: I51ab7d0ee71c214ff16b756cfee16e918738b6fd Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-02-13reclass: maas: Dynamic machine definitionsAlexandru Avadanii2-56/+31
Refactor maas machine definition flow from going through variables in pod_config.yaml to directly handling it in Fuel using a new j2 template. This prepares for future improvements allowing a dynamic compute node count, as well as parameterizing new values via j2. For now, node roles and count are still statically mapped to PDF nodes. JIRA: FUEL-319 Change-Id: I770d82987fcb99792f9d5bc0857ab513f5cd3731 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-07Merge "[virtual] Rename all to drop virtual prefix"Alexandru Avadanii45-71/+71
2018-02-07Merge "Add NOVCP HA OVS scenario (baremetal, virtual)"Alexandru Avadanii17-0/+625
2018-02-07Merge changes from topic 'fix-public-bridge'Michael Polenchuk1-0/+5
* changes: [virtual] Add missing ODL dhcp_int [virsh net] public: rm addr cfg for pure baremetal
2018-02-07[baremetal] cleanup: rm cloud-init iface configAlexandru Avadanii2-6/+0
Upstream commit [1] now handles cloud init interface configuration cleanup, so drop our explicit config from reclass. [1] https://github.com/salt-formulas/salt-formula-linux/commit/b333d284 Change-Id: Ifd624f1e884d0d884513a3a7c3e18ffe3f00949a Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-06[virtual] Rename all to drop virtual prefixAlexandru Avadanii45-71/+71
JIRA: FUEL-322 Change-Id: I99c4b1774a7c3afbc834a6f6e8468f7baf1bc329 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-06Add NOVCP HA OVS scenario (baremetal, virtual)Alexandru Avadanii17-0/+625
Add a new class of scenarios, based on existing baremetal HA scenarios, but instead of having a virtualized control plane (VCP), all Openstack controller services will run directly on the cluster nodes. This change adds the common scaffolding, as well as the OVS scenario. The new scenario(s) can be used on full-baremetal clusters, soon on full-virtual clusters and later on hybrid (virt + bare) clusters. This change defines old (current) style scenario definitions for both baremetal and virtual, both named: - os-nosdn-nofeature-novcp-ha; Prerequisites: 1. Merge-able by name reclass.storage.node definitions Each cluster (e.g. database, telemetry) adds its own set of reclass storage node defitions, which for novcp scenarios should be merged into a single node (kvm) based on the 'name' property. This is not currently supported by upstream reclass 'node.sls' high state, so add support for it via an early patch (required before salt-master-init.sh tries to handle reclass.storage). 2. common reclass classes for novcp Some of the classes in `baremetal-...-common-ha` are not fit for novcp as they define VCP-specific config/inheritance, so add new versions of said classes with novcp in mind or adapt old classes: - parameterize ctl hostname in `openstack_compute.yml`; - new `openstack_control_novcp.yml`; - new `openstack_init_novcp.yml`; 3. Handle hard set names in state files for baremetal nodes Some of our state files (e.g. maas) hardcodes baremetal node names to 'kvm', 'cmp', so we need to align the names in novcp scenario with these values to re-use the maas state. As a future improvement we should parameterize these names in all state files. As a consequence, our baremetal controller nodes will also use 'kvm*' hostnames (instead of 'ctl*'). 4. Add 'noifupdown' to all interfaces on kvm nodes to prevent duplicate IPs/routes created at *any* ifup due to /etc/network/route-br-ex. Patch salt-formula-linux to skip network restart on 'noifupdown', also when routes are present on that interface. JIRA: FUEL-310 Change-Id: Ic67778f63e5ee0334dbfe9547c7109ec1a938d61 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-06[virtual] Add missing ODL dhcp_intAlexandru Avadanii1-0/+5
- add missing network definitions for ODL node's 1st interface; - add missing comments for `notify` global functions; - fix or silence shellcheck issues; JIRA: FUEL-322 Change-Id: Ie3341d29ab12ddf432db603ad865259afb54714e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-06[apt-mk] Switch back to nightlyAlexandru Avadanii2-2/+2
Revert "salt: Use apt-mk 'stable' distribution" Revert "reclass: apt_mk_version: stable" This reverts commit d1b6119e288a31e015573363ce77790fec8684df. This reverts commit 4563ea7d62238e8273d840a8d9c6c1e179ca584e. Change-Id: I383db1f78a087045086096cbc674260b985fd913 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[baremetal] Rename all to drop baremetal prefixAlexandru Avadanii76-235/+235
A few things differ between baremetal and virtual nodes: - provisioning method; - network setup; Since now we support completely dynamic network config based on PDF + IDF, as well as dynamic provisioning of VMs on jumpserver (as virtual cluster nodes), respectively MaaS-driven baremetal provisioning, let's drop the 'baremetal-' prefix from cluster model names and prepare for unified scenarios. Note that some limitations still apply, e.g. virtual nodes are spawned only on jumpserver (localhost) for now. JIRA: FUEL-310 Change-Id: If20077ac37c6f15961468abc58db7e16f2c29260 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] PDF-based network defs for cluster nodesAlexandru Avadanii14-318/+217
Decouple virtual cluster nodes (ctl, gtw etc.) from opnfv_fn_* vars in favor of parsing PDF/IDF. This is the first step towards unifying baremetal and virtual network definition templates, as well as allowing virtual nodes to run on a remote hypervisor (and eventually with a different arch). opnfv_fn_* vars will still be used for infra VMs spawned on FN (cfg01 and optionally mas01). Adopt new 'net_map.j2' from Pharos submodule for new templates (virt), as well as old ones (baremetal). JIRA: FUEL-322 Change-Id: I150c2416566bbe42ea11cd00f12a8a7bf96776c2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Parameterize cluster model based on PDFAlexandru Avadanii16-80/+58
- 10.1.0.0/24 (internal): * 10.1.0.101 -> opnfv_openstack_compute_node01_tenant_address * 10.1.0.124 -> opnfv_openstack_gateway_node01_tenant_address - 172.16.10.0/24 (mgmt): * 172.16.10.11 -> opnfv_openstack_control_node01_address * 172.16.10.100 -> opnfv_infra_config_address * 172.16.10.101 -> opnfv_openstack_compute_node01_control_address * 172.16.10.111 -> opnfv_opendaylight_server_node01_single_address * 172.16.10.124 -> opnfv_openstack_gateway_node01_address - 10.16.0.0/24 (public): * 10.16.0.11 -> opnfv_openstack_control_node01_external_address * 10.16.0.101 -> opnfv_openstack_compute_node01_external_address * 10.16.0.124 -> opnfv_openstack_gateway_node01_external_address To re-use DPDK config baremetal template, move: - cluster.baremetal-mcp-pike-ovs-dpdk-ha.infra.config_pdf + cluster.all-mcp-arch-common.infra.config_dpdk_pdf Drop unused 'ceilometer_graphite_publisher_host' (172.16.10.107). JIRA: FUEL-322 Change-Id: I3aef3415bd696a7ae5b566af12af4733a50c2135 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Change IP addrs to align with baremetalAlexandru Avadanii7-24/+24
To be able to re-use pod_config.yaml parameters generated based on PDF for both baremetal and virtual scenarios without forking it, we first need to align the IP addresses used in virtual deployments. Currently hard set values will be parameterized in an ulterior change. - 10.1.0.0/24 (internal): * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); - 172.16.10.0/24 (mgmt): * 101 -> 11 (ctl01); * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); - 10.16.0.0/24 (public): * 101 -> 11 (ctl01); * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); JIRA: FUEL-322 Change-Id: I5d5def4e92c3462f1a34f73dde65ef7a262a5d62 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Split 'pxebr' from 'mcpcontrol' netAlexandru Avadanii1-1/+1
- add new virsh managed network 'pxebr' (to mimic baremetal behavior on virtual PODs, this will be the equivalent of PXE/admin network); - connect 'pxebr' to 3rd interface for cfg01, mas01 for all deploys (used to be baremetal-specific), replacing 'internal'; - keep 'mcpcontrol' connected only to 'cfg01' (+ 'mas01' if present) for initial infrastructure bring-up (1st interface); - switch all virtual cluster nodes to 'pxebr' (1st interface); - use 'pxebr' for all Salt cluster nodes traffic, 'mcpcontrol' only for mas01<=>cfg01 Salt traffic; - convert <user-data.template> to jinja2 and expand it based on PDF instead of using `envsubst`; - split <user-data.sh.j2> into two versions, one for each network used for Salt traffic; - ci/deploy.sh: Read scenario data before template parsing for cluster domain variable, needed in virsh network def; - leave docs diagram refresh to later after all possible deploy types have settled; - limit keyserver proxy usage to nodes where the configured http proxy matches the first nameserver (true for all MaaS-provisioned nodes), so we can re-use the same pillar for FN VMs and baremetal nodes; - add PXE/admin IP on cfg01's 3rd interface and switch other vnodes `salt_master_host` to point to it; JIRA: FUEL-322 Change-Id: Ie4f7aedddf2ef81046f1127b377d88dce79f0fda Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[FN VM] Reboot VMs on jump, wait for all onlineAlexandru Avadanii2-0/+17
- apply `linux` state on cfg01 first, so PXE/admin IP is added and FN VM minions are available; - add barrier and wait for all FN VMs to register with cfg01; - use batch-mode execution while applying `linux.network` on FN VMs; - retry all states executed via <salt.sh> on FN VMs; JIRA: FUEL-310 Change-Id: I72e1c565370072500df1d486fe76e6315f583c75 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[PDF] Switch to generate_config, unify templatesAlexandru Avadanii3-31/+6
- move bash template handling (previously expanded via `envsubst`) to lib.sh; - move j2 template handling to lib.sh; - move virsh network templates to 'mcp/scripts/virsh_net' subdir; - switch virsh network templates from `envsubst` expansion to j2 and leverage generate_config.py, similar to PDF Fuel installer adapter; - add relevant runtime env vars (e.g. SALT_MASTER, MAAS_IP) on the fly to PDF, to consume them in templates like params coming from PDF; - parameterize virsh network definitions based on PDF (mgmt, public); JIRA: FUEL-322 Change-Id: Ib94e78fc4f25797b9354a0552e884104da5d0003 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[baremetal] Retire example pod_config.yamlAlexandru Avadanii1-111/+0
It is easier to just generate the `pod_config.yaml` file than to maintain it, so let's remove it. While at it, link sample PDF/IDF inside pharos git submodule, so we don't have to pass a different lab-config URI to use the sample. To generate pod_config.yml for the sample PDF/IDF: $ ./ci/deploy.sh -l local -p pod1 -s os-odl-nofeature-ha -d $ cat mcp/deploy/images/pod_config.yml JIRA: FUEL-322 Change-Id: If5898f92ef54bebc31d57f9632959e9093a89250 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-03Merge "[baremetal] Fix: wrong nic name idf index"Alexandru Avadanii2-2/+2
2018-02-02[baremetal] Fix: wrong nic name idf indexGuillermo Herrero2-2/+2
This was only affecting pod deployments with different board models, under the current limited support: - 3 KVMs will be same model and have the same NIC names - 2 Compute nodes will be the same model and have same NIC names For the computes nodes, br-mesh NIC name was wrong due to incorrect idf mapping Change-Id: I9685b35cb23b03be9fc0e6fe16c0712a9ad70e19 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-02-02Revert "[FN VMs] remove graphics"Alexandru Avadanii12-33/+45
RHEL family virtualization tools reserve 02:00 PCI slot for VGA, even if 'nographics' is specified when creating the VM (in case the user wants to later hook a video card, which usually *requires* PCI slot2). Debian systems do not follow this rule (tested with libvirt 1.x, 2.x, 3.x), hence 1st NIC lands on PCI slot 2 (and get eth name 'ens2'). To align the behavior across all possible jumpserver distros, bring back the virtio video. This reverts commit 738f6c3b68d1179de1ff790f9e72c25f10874da4. Change-Id: Ifd855c12e04aec1ff0ab047b13f8081365741889 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-01[baremetal] Allow MaaS timeouts to be set via IDFAlexandru Avadanii2-10/+2
Bump Pharos git submodule to pick up support for MaaS timeout parameterization, as well as new IDF for lf-pod2. Drop arch-specific MaaS timeouts, as they are now configurable on a per-POD basis. Sample usage (via IDF): idf: fuel: maas: # MaaS timeouts (in minutes) timeout_comissioning: 10 timeout_deploying: 15 Change-Id: I8fafa336b0bc64d705f6c2e40fc3dfb85672fb15 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Turn off Retpoline and KPTI protectionMichael Polenchuk2-0/+8
Based on Canonical research (https://goo.gl/QJykMa) there is low-risk of attack for private clouds environments, therefore turn off the related kernel patches & regain performance back. Change-Id: I661fa127241e327b07d21a29d58d584997607123 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-30Update reclass system modelMichael Polenchuk1-0/+0
Get the latest reclass system model to be in sync with salt formulas code. Adjust keystone v3 admin endpoint patch. Change-Id: Ia7ce6187b875cc9e18af2784ef1eb5df1c145c7d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-29[FN VMs] remove graphicsAlexandru Avadanii12-45/+33
Since VCP VMs (created via salt formula) do not have a video controller defined in their domain XMLs, network devices end on different PCI slots and hence have different names assigned (ens2+ vs foundation node VMs, which start with ens3). To align network interface names for VMs on jumpserver vs kvm nodes, and reduce confusion, remove the video controller from FN VMs. This allows some cleanup: - drop extra AArch64 args from virt-install; - unify 'opnfv_vcp_vm_*' and 'opnfv_fn_vm_*' variables; Change-Id: I0d108b00914b3eaaa03b67c652174f8ed4573118 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-26[ovs/dpdk] Configure vxlan for baremetal scenarioMichael Polenchuk3-11/+11
* switch ovs/dpdk scenario from vlan to vxlan mode * force br-ex interface to mitigate race with incorrect state * remove dpdk packages list (already in upstream) Change-Id: Ib827cef2d67879fd2a86d286ca2118b22493274d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-25[baremetal] Fix openstack_compute_pdf yaml errAlexandru Avadanii1-2/+2
Fixes: 7c79115 Change-Id: I62f52382b297b1aa9cfc37f74f04a00872ead1ef Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25Merge "Add support for different public network netmask"Alexandru Avadanii5-4/+12
2018-01-25Merge "[lab-config] Use Pharos submodule by default"Alexandru Avadanii5-45/+45
2018-01-24[lab-config] Use Pharos submodule by defaultAlexandru Avadanii5-45/+45
- switch from securedlab to pharos as lab-config structure; - accomodate the move net_config from PDF to IDF in j2 templates; Change-Id: Ib04e4fb384568a6efd9e78a080857b663521ae88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22[baremetal] Fix ocata referenceAlexandru Avadanii3-2/+2
Previous cherry-pick failed to rename 'ocata' to 'pike'. JIRA: FUEL-317 Change-Id: Ic1a1145e0652f2a7d15980399232631cf3fc5080 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22[baremetal] Add upstream (lab) proxy supportAlexandru Avadanii3-0/+26
If upstream proxy is defined in IDF, propagate it to pillar data: - linux:system:proxy:keyserver:http(s) for cfg01, mas01; - maas:region:upstream_proxy for mas01; Sample IDF config: idf: fuel: network: upstream_proxy: address: 10.0.2.2 port: 3128 JIRA: FUEL-317 Change-Id: I12be815e1b4564227fb09c20ce06cd71e7d433b6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22Add support for different public network netmaskGuillermo Herrero5-4/+12
- Remove hardcoded /24 mask - Use PDF as source for public network, with reclass params: opnfv_net_public, _mask, _gw, _pool_start, _pool_end JIRA: FUEL-315 Change-Id: Idf3a4ed8f63f58fa90d9c1dcb7751ef3b1c9bd36 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-01-22Merge "reclass: apt_mk_version: stable"Michael Polenchuk2-2/+2
2018-01-22Merge "[baremetal] Fix cmp proto dhcp on PXE/admin"Michael Polenchuk2-0/+8
2018-01-22[patch] system.repo: Add keyserver proxy supportAlexandru Avadanii1-4/+5
Instead of defining a http proxy for all salt-minion traffic, which also includes some Openstack API accesses we can't filter (no_proxy is not yet supported), add & leverage support for proxy configuration during APT keyserver access / key download. JIRA: FUEL-331 Change-Id: I9470807633596c610cfafb141b139ddda2ff096b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21[baremetal] Fix cmp proto dhcp on PXE/adminAlexandru Avadanii2-0/+8
Although we properly filter the PXE/admin interface in the common openstack_compute_pdf.yml.j2 template and use DHCP instead of manual setup, we failed to do the same in scenario-specific overrides (ODL, OVS), so we end up with 'proto: manual' on PXE/admin on cmp nodes. The fix is trivial and reuses the mechanism in the common class in scenario-specific templates (if interface is PXE/admin, use 'DHCP' instead of 'manual'). This solves the issue of broken connectivity to Salt master after cmp reboot. Change-Id: I1953d03343190acb2efcab4412a3d37e130b0ea9 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21reclass: apt_mk_version: stableAlexandru Avadanii2-2/+2
Although previous commit d1b6119 changed the first reference of apt-mk repos to 'stable' from 'nightly', it missed the cluster model. This fixes redeploys with `-f`, which fail due to conflicts between already installed 'stable' packages and 'nightly' ones. Fixes: d1b6119 Change-Id: I854bac86feaaa61da0b68d158e270eec1ee0ccb7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-19Get back to the GA kernelMichael Polenchuk1-1/+1
- openvswitch 2.8 officially supports kernel versions from 3.10 to 4.12 - ODL baremetal scenario is acting up with floating/public SNAT flow under hwe edge kernel 4.13 Change-Id: I099d528b3b1c2ea34f8f856cd60f809f90defea6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-11[baremetal] Disable dhcp offered routesMichael Polenchuk1-0/+0
Prevent dhcp client from setting an unwanted default routes on compute nodes. Change-Id: I2529491bbc977647e5f457d5f1ba88b0cc4372ee Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-07MaaS: Set commission/deploy timeouts via reclassAlexandru Avadanii2-0/+8
Allow end-users to easily change the MaaS commissioning/deploying timeouts by simply editing the reclass model. While at it, use arch-specific values and bump deploy timeout on AArch64 to 20 minutes instead of 15. Change-Id: I37ae434ecebdd64effb007baa06c722b1db15c66 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-05[baremetal] ODL: Move ODL VCP VM to kvm02Alexandru Avadanii1-1/+1
Balance VM distribution on the 3 kvm nodes, as kvm02 has 4 VCP VMs while kvm{01,03} have 5 VCP VMs each (without ODL). Instead of spawning the ODL VCP VM on kvm03, move it to kvm02. Change-Id: Id03b9453ee7c15cd6785c0bc073a38b87034aede Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-03[baremetal] Switch VCP base image to UCAAlexandru Avadanii1-1/+1
Since Mirantis prebuilt image comes with salt-minion 2016.3 instead of 2016.11 and upgrading it leads to a hard to break catch-22, use the Ubuntu cloud archive image we already download for FN VMs and pre-install: - a newer kernel (hwe-edge); - salt-minion (2016.11); This also implicitly aligns the image handling on AArch64 and x86_64. Change-Id: I86d1c777449d37bdd0348936a598e3ffe9d265af Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-03[baremetal] curtin: Bump salt-minion to 2016.11Alexandru Avadanii1-0/+2
By default, MaaS formula will install Salt minion 2016.3 via curtin on physical nodes. 2016.3 does not properly support proxy_host config option, causing timeouts during `linux.system.repo` SLS apply. Change-Id: I3d6245f0d4b425170c43b3b62a21ad9acc6cb97e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-02[baremetal] heat: Switch metadata API URL to mgmtAlexandru Avadanii1-0/+14
Prepare for decoupling management from public (drop mas01 NAT): - ctl: change heat URLs to use new management VIP instead of public; Change-Id: I8e220ee37bd4177c3afd58a9ee401f815d046706 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-02[baremetal] prx: Add management network VIPAlexandru Avadanii3-3/+9
Include `openstack_web_public_vip` class for setting up the old VIP in the public network, use old class for mgmt VIP. Also change the generic hostname 'prx' to point inside mgmt net. Change-Id: Iff69394f16ede290d149a26b054a85371f00f8e0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-01[baremetal] MaaS: Enable HTTP proxyAlexandru Avadanii7-1/+30
Instead of using NAT on the mas01 node for all cluster node outgoing traffic, use the MaaS built-in proxy for APT traffic to leverage its caching capabilities too. Also enable the proxy for salt minions, so they can access public keyservers et al. Cleanup public DNS from kvm nodes, interferes with MaaS proxy. Add example config for global env proxy, but don't enable it: - default environment settings - /etc/environment (via reclass); The MaaS proxy will not be used (at least for now) on nodes: - cfg01; - mas01; NOTE: We can't yet drop the maas.pxe_nat state completely, as certain Openstack services are still accessed via public addresses from ctl nodes. JIRA: FUEL-317 JIRA: FUEL-318 Change-Id: I6c5f6872bb94afb838580571080e808bc262fc68 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-31[baremetal] cmp: Add missing public gw (default)Alexandru Avadanii1-0/+5
When we dropped the default gw via mas01 NAT, we uncovered a bug, compute nodes do not have the proper public gw set up and used to reach public network via mas01, slowing everything down. Add gw similar to prx nodes. Fixes: d4ab072 Change-Id: I4343c31c376a7a223670cdd623366454396d8d92 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-29[netconfig] APT: Prefer ipv4 connections over ipv6Alexandru Avadanii2-0/+9
Ubuntu prefers ipv6 connections therefore in some networks, this breaks software updates (it does a AAAA DNS lookup before A record lookups). Let's prefer old style ipv4 connections over the new ipv6 in order to save some processing and resource utilization. Based on previous work from [1] (but without /etc/gai.conf, only APT). [1] https://review.openstack.org/#/c/462502/ JIRA: FUEL-321 Change-Id: Ic3dff3baa1c0be9ac95972557d6a2d26641bfe1b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>