Age | Commit message (Collapse) | Author | Files | Lines |
|
Baremetal support introduced a couple of VCP VMs, which have 2
network interfaces:
- primary (ens3 inside x86 VM) - connected to "br-mgmt" bridge on
each kvm node, serves for MaaS DHCP / connection to salt master;
- secondary (ens4 inside x86 VM) - connected to "br-ctl" bridge on
each kvm node, serves for Openstack Management network;
However, the reclass model was configured to use a single IP address
on the primary interface, breaking the connnection to salt master,
while also not connecting the Openstack Management network properly.
Fix this by configuring the primary interface for DHCP, while the
secondary gets a static IP in Openstack Management network.
Change-Id: I9f1d6f080e882bfaae7b5f209bc3c5536826ba06
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
In order to connect to right underlay
bridge, swap interfaces.
Change-Id: I0ae1f50e8d1f3485404bd7e6eea772cab555b313
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Previously, we hardcoded the fabric name for our 3rd interface
(which serves PXE/DHCP for the target nodes) to "fabric-2",
relying on predictable index numbers to be provided by MaaS based
on the interfaces defined in /etc/network/interfaces.
However, the fabric IDs/names generated by MaaS are not predictable,
and therefore cannot be hardcoded in our reclass model / scripts.
Work around this by:
- adding support for fabric ID deduction based on CIDR matching
during subnet create/update operation in MaaS py module;
- adding support for VLAN DHCP enablement to MaaS py module,
which was previously handled via shell MaaS API operations
from maas/region.sls;
While at it, revert previous commit that disabled network discovery
("MaaS: Disable network discovery"), since it turns out that network
discovery was not the culprit for subnet creation failure, but wrong
fabric numbering.
This reverts commit 8cdf22d1a1bae4694a373873cab4feb6251069b7.
Change-Id: I15fa059004356cb4aaabb38999ea378dd3c0e0bb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
In case nodes are already powered on and have an IP in the same
range as the new MaaS DHCP one (e.g. from a previous deploy),
MaaS API will reject the subnet creation due to overlapping
addresses. Try to work around this by disabling network discovery.
Change-Id: I70a33c552bf38a7ccbc1bb7e90c21f424f082bc5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Without the 'type' parameter set to 'dynamic', MaaS was configured
to reserve the IP range instead of allocating it dynamically.
This led to IP exhaustion warnings in MaaS dashboard, as well as
wrongful IP allocation.
Change-Id: I1f2b90bf4cd2393cfab6d4bc17771cef009701c0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Explicitly configure dhcp_interface for mas01, in order to allow
the interface name to be parametrized via "dhcp_interface" _param.
Change-Id: I6a2750adc1941c0aa1f94ac9b39133b5bd2388c6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* re-assign ip from interface to bridge
- install bridge utils
- make a reboot straight away after network config
* change image source for vcp
Change-Id: I34506ee161337b5d3a4088cfdf3c082d99ccb695
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
- ci/deploy.sh: fail if default scenario file is missing;
- start by copying reclass/classes/cluster/virtual-mcp-ocata-ovs as
classes/cluster/baremetal-mcp-ocata-ovs;
- add new state (maas) that will handle MaaS configuration;
- Split PXE network in two for baremetal:
* rename old "pxe" virtual network to "mcpcontrol", make it
non-configurable and identical for baremetal/virtual deploys;
* new "pxebr" bridge is dedicated for MaaS fabric network, which
comes with its own DHCP, TFTP etc.;
- Drop hardcoded PXE gateway & static IP for MaaS node, since
"mcpcontrol" remains a NAT-ed virtual network, with its own DHCP;
- Keep internet access available on first interfaces for cfg01/mas01;
- Align MaaS IP addrs (all x.y.z.3), add public IP for easy debug
via MaaS dashboard;
- Add static IP in new network segment (192.168.11.3/24) on MaaS
node's PXE interface;
- Set MaaS PXE interface MTU 1500 (weird network errors with jumbo);
- MaaS node: Add NAT iptables traffic forward from "mcpcontrol" to
"pxebr" interfaces;
- MaaS: Add harcoded lf-pod2 machine info (fixed identation in v6);
- Switch our targeted scenario to HA;
* scenario: s/os-nosdn-nofeature-noha/os-nosdn-nofeature-ha/
- maas region: Use mcp.rsa.pub from ~ubuntu/.ssh/authorized_keys;
- add route for 192.168.11.0/24 via mas01 on cfg01;
- fix race condition on kvm nodes network setup:
* add "noifupdown" support in salt formula for linux.network;
* keep primary eth/br-mgmt unconfigured till reboot;
TODO:
- Read all this info from PDF (Pod Descriptor File) later;
- investigate leftover references to eno2, eth3;
- add public network interfaces config, IPs;
- improve wait conditions for MaaS commision/deploy;
- report upstream breakage in system.single;
Change-Id: Ie8dd584b140991d2bd992acdfe47f5644bf51409
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>
Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Keep UCA default apt sources, instead of overriding them with arch
specific values from:
- system.linux.system.repo.ubuntu
Change-Id: I1edc725a97ae6290d316a7916c27fd904f59db04
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
* set ntp sweden servers list for virtuals
* wrap common cluster init options
Change-Id: I044802998d5498fed969e62bf1ea8c814652f34f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* apply provider mappings on compute nodes as well
* set default route of computes to gateway node
Change-Id: I5715e34fd8ecbed87bd7f1b1ed488766af711bae
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Current opendaylight pillar enforces a full apt repository cleanup,
removing Ubuntu Cloud Archive (UCA) repos in favor of adding
pre-hardcoded Ubuntu archive repos.
Unlike UCA, main Ubuntu archive is split based on target arch, the
main archive.ubuntu.com holding only x86 packages, while the other
archs are hosted on ports.ubuntu.com.
This leads to adding (only) x86-specific repositories to our AArch64
UCA image.
Mitigate this by ommiting "system.linux.system.repo.ubuntu" from the
opendaylight pillar, leaving the default UCA repos in place.
Change-Id: Ia7033bcb544d8752d5557bbabc92c92c5008b00c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I8a3be1764de136e2ecf81f964233483be5d6655a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* tune net/tcp opts
* handle vcpus setting for vms
* fix tempest issue with public subnets visible
* set reclass data source to local to avoid git clone
Change-Id: Ibac9eba8234ebb20854c03b399405968cb2069e8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
In order to pass functest/api_check, configure public endpoints of
openstack core services with external ip address.
Change-Id: I519865df5700acbcf542ea71efd87780e9f1d9d5
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I4fc0c0e040c97e91c79aae2f0142fb6f025081f2
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I29ad8fc0e504779184fdf3795dc82ce1b031dbf8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* fix formula & reclass cluster model
* bring in running states
Change-Id: I8e66e69045f5c745f9aa6f59f7ce6d66b5bf1c95
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I2eed0cf19907f257be1cb4aee96528cc41f4843a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I445f6ac802fbf1b382b18bcb4306eb5538cb1867
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* remove glusterfs from cluster
* increase amount of ram on controller
* bring in one more compute node
Change-Id: I04ccd4cdaf65bb860d6d3b9c012e035f598e44d5
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Make a reboot of the compute nodes to activate hugepages support
and re-apply required states then. Also align ovs lcore & pmd
masks with two cpu nodes.
Change-Id: I4a5defe6f08e912aba2d939ba5ba057af768a40c
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Ifd6d61026a0e98e8faf59c7d218333122d70ffe9
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I1a865b7524f3a5242544e60e6b36b1092721c58b
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|