summaryrefslogtreecommitdiffstats
path: root/mcp/reclass/classes/cluster
AgeCommit message (Collapse)AuthorFilesLines
2018-02-02Revert "[FN VMs] remove graphics"Alexandru Avadanii12-33/+45
RHEL family virtualization tools reserve 02:00 PCI slot for VGA, even if 'nographics' is specified when creating the VM (in case the user wants to later hook a video card, which usually *requires* PCI slot2). Debian systems do not follow this rule (tested with libvirt 1.x, 2.x, 3.x), hence 1st NIC lands on PCI slot 2 (and get eth name 'ens2'). To align the behavior across all possible jumpserver distros, bring back the virtio video. This reverts commit 738f6c3b68d1179de1ff790f9e72c25f10874da4. Change-Id: Ifd855c12e04aec1ff0ab047b13f8081365741889 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-01[baremetal] Allow MaaS timeouts to be set via IDFAlexandru Avadanii2-10/+2
Bump Pharos git submodule to pick up support for MaaS timeout parameterization, as well as new IDF for lf-pod2. Drop arch-specific MaaS timeouts, as they are now configurable on a per-POD basis. Sample usage (via IDF): idf: fuel: maas: # MaaS timeouts (in minutes) timeout_comissioning: 10 timeout_deploying: 15 Change-Id: I8fafa336b0bc64d705f6c2e40fc3dfb85672fb15 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Turn off Retpoline and KPTI protectionMichael Polenchuk2-0/+8
Based on Canonical research (https://goo.gl/QJykMa) there is low-risk of attack for private clouds environments, therefore turn off the related kernel patches & regain performance back. Change-Id: I661fa127241e327b07d21a29d58d584997607123 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-29[FN VMs] remove graphicsAlexandru Avadanii12-45/+33
Since VCP VMs (created via salt formula) do not have a video controller defined in their domain XMLs, network devices end on different PCI slots and hence have different names assigned (ens2+ vs foundation node VMs, which start with ens3). To align network interface names for VMs on jumpserver vs kvm nodes, and reduce confusion, remove the video controller from FN VMs. This allows some cleanup: - drop extra AArch64 args from virt-install; - unify 'opnfv_vcp_vm_*' and 'opnfv_fn_vm_*' variables; Change-Id: I0d108b00914b3eaaa03b67c652174f8ed4573118 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-26[ovs/dpdk] Configure vxlan for baremetal scenarioMichael Polenchuk3-11/+11
* switch ovs/dpdk scenario from vlan to vxlan mode * force br-ex interface to mitigate race with incorrect state * remove dpdk packages list (already in upstream) Change-Id: Ib827cef2d67879fd2a86d286ca2118b22493274d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-25[baremetal] Fix openstack_compute_pdf yaml errAlexandru Avadanii1-2/+2
Fixes: 7c79115 Change-Id: I62f52382b297b1aa9cfc37f74f04a00872ead1ef Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25Merge "Add support for different public network netmask"Alexandru Avadanii5-4/+12
2018-01-25Merge "[lab-config] Use Pharos submodule by default"Alexandru Avadanii5-45/+45
2018-01-24[lab-config] Use Pharos submodule by defaultAlexandru Avadanii5-45/+45
- switch from securedlab to pharos as lab-config structure; - accomodate the move net_config from PDF to IDF in j2 templates; Change-Id: Ib04e4fb384568a6efd9e78a080857b663521ae88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22[baremetal] Fix ocata referenceAlexandru Avadanii3-2/+2
Previous cherry-pick failed to rename 'ocata' to 'pike'. JIRA: FUEL-317 Change-Id: Ic1a1145e0652f2a7d15980399232631cf3fc5080 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22[baremetal] Add upstream (lab) proxy supportAlexandru Avadanii3-0/+26
If upstream proxy is defined in IDF, propagate it to pillar data: - linux:system:proxy:keyserver:http(s) for cfg01, mas01; - maas:region:upstream_proxy for mas01; Sample IDF config: idf: fuel: network: upstream_proxy: address: 10.0.2.2 port: 3128 JIRA: FUEL-317 Change-Id: I12be815e1b4564227fb09c20ce06cd71e7d433b6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22Add support for different public network netmaskGuillermo Herrero5-4/+12
- Remove hardcoded /24 mask - Use PDF as source for public network, with reclass params: opnfv_net_public, _mask, _gw, _pool_start, _pool_end JIRA: FUEL-315 Change-Id: Idf3a4ed8f63f58fa90d9c1dcb7751ef3b1c9bd36 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-01-22Merge "reclass: apt_mk_version: stable"Michael Polenchuk2-2/+2
2018-01-22Merge "[baremetal] Fix cmp proto dhcp on PXE/admin"Michael Polenchuk2-0/+8
2018-01-22[patch] system.repo: Add keyserver proxy supportAlexandru Avadanii1-4/+5
Instead of defining a http proxy for all salt-minion traffic, which also includes some Openstack API accesses we can't filter (no_proxy is not yet supported), add & leverage support for proxy configuration during APT keyserver access / key download. JIRA: FUEL-331 Change-Id: I9470807633596c610cfafb141b139ddda2ff096b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21[baremetal] Fix cmp proto dhcp on PXE/adminAlexandru Avadanii2-0/+8
Although we properly filter the PXE/admin interface in the common openstack_compute_pdf.yml.j2 template and use DHCP instead of manual setup, we failed to do the same in scenario-specific overrides (ODL, OVS), so we end up with 'proto: manual' on PXE/admin on cmp nodes. The fix is trivial and reuses the mechanism in the common class in scenario-specific templates (if interface is PXE/admin, use 'DHCP' instead of 'manual'). This solves the issue of broken connectivity to Salt master after cmp reboot. Change-Id: I1953d03343190acb2efcab4412a3d37e130b0ea9 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21reclass: apt_mk_version: stableAlexandru Avadanii2-2/+2
Although previous commit d1b6119 changed the first reference of apt-mk repos to 'stable' from 'nightly', it missed the cluster model. This fixes redeploys with `-f`, which fail due to conflicts between already installed 'stable' packages and 'nightly' ones. Fixes: d1b6119 Change-Id: I854bac86feaaa61da0b68d158e270eec1ee0ccb7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-19Get back to the GA kernelMichael Polenchuk1-1/+1
- openvswitch 2.8 officially supports kernel versions from 3.10 to 4.12 - ODL baremetal scenario is acting up with floating/public SNAT flow under hwe edge kernel 4.13 Change-Id: I099d528b3b1c2ea34f8f856cd60f809f90defea6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-07MaaS: Set commission/deploy timeouts via reclassAlexandru Avadanii2-0/+8
Allow end-users to easily change the MaaS commissioning/deploying timeouts by simply editing the reclass model. While at it, use arch-specific values and bump deploy timeout on AArch64 to 20 minutes instead of 15. Change-Id: I37ae434ecebdd64effb007baa06c722b1db15c66 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-05[baremetal] ODL: Move ODL VCP VM to kvm02Alexandru Avadanii1-1/+1
Balance VM distribution on the 3 kvm nodes, as kvm02 has 4 VCP VMs while kvm{01,03} have 5 VCP VMs each (without ODL). Instead of spawning the ODL VCP VM on kvm03, move it to kvm02. Change-Id: Id03b9453ee7c15cd6785c0bc073a38b87034aede Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-03[baremetal] Switch VCP base image to UCAAlexandru Avadanii1-1/+1
Since Mirantis prebuilt image comes with salt-minion 2016.3 instead of 2016.11 and upgrading it leads to a hard to break catch-22, use the Ubuntu cloud archive image we already download for FN VMs and pre-install: - a newer kernel (hwe-edge); - salt-minion (2016.11); This also implicitly aligns the image handling on AArch64 and x86_64. Change-Id: I86d1c777449d37bdd0348936a598e3ffe9d265af Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-03[baremetal] curtin: Bump salt-minion to 2016.11Alexandru Avadanii1-0/+2
By default, MaaS formula will install Salt minion 2016.3 via curtin on physical nodes. 2016.3 does not properly support proxy_host config option, causing timeouts during `linux.system.repo` SLS apply. Change-Id: I3d6245f0d4b425170c43b3b62a21ad9acc6cb97e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-02[baremetal] heat: Switch metadata API URL to mgmtAlexandru Avadanii1-0/+14
Prepare for decoupling management from public (drop mas01 NAT): - ctl: change heat URLs to use new management VIP instead of public; Change-Id: I8e220ee37bd4177c3afd58a9ee401f815d046706 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-02[baremetal] prx: Add management network VIPAlexandru Avadanii3-3/+9
Include `openstack_web_public_vip` class for setting up the old VIP in the public network, use old class for mgmt VIP. Also change the generic hostname 'prx' to point inside mgmt net. Change-Id: Iff69394f16ede290d149a26b054a85371f00f8e0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-01[baremetal] MaaS: Enable HTTP proxyAlexandru Avadanii7-1/+30
Instead of using NAT on the mas01 node for all cluster node outgoing traffic, use the MaaS built-in proxy for APT traffic to leverage its caching capabilities too. Also enable the proxy for salt minions, so they can access public keyservers et al. Cleanup public DNS from kvm nodes, interferes with MaaS proxy. Add example config for global env proxy, but don't enable it: - default environment settings - /etc/environment (via reclass); The MaaS proxy will not be used (at least for now) on nodes: - cfg01; - mas01; NOTE: We can't yet drop the maas.pxe_nat state completely, as certain Openstack services are still accessed via public addresses from ctl nodes. JIRA: FUEL-317 JIRA: FUEL-318 Change-Id: I6c5f6872bb94afb838580571080e808bc262fc68 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-31[baremetal] cmp: Add missing public gw (default)Alexandru Avadanii1-0/+5
When we dropped the default gw via mas01 NAT, we uncovered a bug, compute nodes do not have the proper public gw set up and used to reach public network via mas01, slowing everything down. Add gw similar to prx nodes. Fixes: d4ab072 Change-Id: I4343c31c376a7a223670cdd623366454396d8d92 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-29[netconfig] APT: Prefer ipv4 connections over ipv6Alexandru Avadanii2-0/+9
Ubuntu prefers ipv6 connections therefore in some networks, this breaks software updates (it does a AAAA DNS lookup before A record lookups). Let's prefer old style ipv4 connections over the new ipv6 in order to save some processing and resource utilization. Based on previous work from [1] (but without /etc/gai.conf, only APT). [1] https://review.openstack.org/#/c/462502/ JIRA: FUEL-321 Change-Id: Ic3dff3baa1c0be9ac95972557d6a2d26641bfe1b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-22Merge "[ovn] Weed out gateway node from reclass storage"Alexandru Avadanii4-5/+19
2017-12-22[vcp] Catch 'no response' of salt minion as wellMichael Polenchuk1-5/+0
Salt minion could return 'no response' and cause an unconfigured state of the vcp node(s), so catch this output after linux state as well. Also clean up excess route on proxy nodes. Change-Id: I3183fa09ff41a8f027ee789869bdae0c3962ab8f Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-22[ovn] Weed out gateway node from reclass storageMichael Polenchuk4-5/+19
Change-Id: I87efd87f8ac05ed9b3189e5dba80748e07c86d5d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-21Bring in ovn based scenarioMichael Polenchuk10-1/+113
OVN based scenario doesn't require conventional gateway node since connectivity to external networks and routing occurs on compute nodes. Change-Id: I81e0d497170d5ffb067adf13b0e46290525f26a6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-19[dpdk] Remove user/group setting for ovs rundirMichael Polenchuk1-0/+1
The proper patches have been merged into upstream (nova/neutron formulas, system reclass) to use a separate dir for vhost_user sockets. Change-Id: Iba8d8a9a05c5ab681b5b5ffbea786dca92704c82 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-19Set libvirt unix_sock_group as an optionMichael Polenchuk1-0/+1
Updated libvirt formula now supports group name as an option for unix socket parameter. Change-Id: I683e38971fe6c939fd09e95b805d611ddc596f28 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-18Merge "states: networks: Use role-based addressing"Alexandru Avadanii1-1/+1
2017-12-18Merge "[baremetal] cleanup: Remove unused gtw node data"Alexandru Avadanii2-23/+0
2017-12-18Merge "[baremetal] Move salt master IP to PXE/admin"Alexandru Avadanii6-4/+15
2017-12-18[maas] Set edge hwe kernel as a default minimumMichael Polenchuk1-6/+7
Change-Id: I360dcb675c90b6f20687979ebc493afe6682c821 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-18[baremetal] Move salt master IP to PXE/adminAlexandru Avadanii6-4/+15
Use PXE/admin network for salt traffic from/to all minions except cfg01, mas01. This allows us to drop the route to admin net from cfg01. Change-Id: Ic2526f1ff77afe5d92ced900971f4c8f78d2d8a2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-18[baremetal] MaaS: Fix DHCP dynamic reserved rangeAlexandru Avadanii2-8/+9
- patch MaaS to default to `DHCP` instead of `AUTO` for physical PXE interfaces (all IPs will be handed out by MaaS DHCP *inside* the defined dynamic DHCP IP range); - reduce range to silence bogus MaaS warning about address exhaustion; - regenerate pod_config.yml.example to reflect the changes; - drop `opnfv_infra_maas_pxe_address` (duplicate of `opnfv_infra_maas_node01_deploy_address`); - add `opnfv_infra_config_pxe_address` for future usage; - while at it, fix missing patch copyright; JIRA: FUEL-316 Change-Id: I81fad333e77f7c8508cd2b2b267c7b39c130e3e1 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-16[baremetal] cleanup: Remove unused gtw node dataAlexandru Avadanii2-23/+0
Change-Id: I48f73caa0f7cae532d4d9b3f68e1d8de59f8dd9e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-16states: networks: Use role-based addressingAlexandru Avadanii1-1/+1
JIRA: FUEL-310 Change-Id: Ice6d6bbb2d2ee8e21f2757b02056873d1a030ea3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-14[baremetal] Move VCP iface config to own ymlAlexandru Avadanii28-91/+100
- move linux.network.interface definitions to their own classes, which also removes the previous requirement of defining {dhcp,single}_nic parameters in classes that don't actually use them; - drop now useless {dhcp,single}_nic parameters; - expand linux_{dhcp,single}_interface macros, since they cause issues with reclass dict-merge while attempting to override sub-vars (i.e. it's not possible to set 'enabled: false' via reclass interpolation); JIRA: FUEL-310 Change-Id: I29d921f545e761de335a60e242a4523d13b06c78 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-14Merge "[baremetal] idf support for different board types"Alexandru Avadanii1-1/+1
2017-12-14Return back repo with glusterfsMichael Polenchuk3-0/+6
Glusterfs 3.11 package from UCA repo has the bug#875651, which causes package instalation error due to timeout of glustereventsd service startup. Therefore get the latest version from PPA repo. Change-Id: Ia47d969e758c8689508dfd6b7fd2725514ea88c5 Co-Authored-By: Alexandru Avadanii <Alexandru.Avadanii@enea.com> Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-14[baremetal] idf support for different board typesGuillermo Herrero1-1/+1
This modification enables having different models of target nodes but restricts them to two groups of the same kind assuming: - 3 KVMs will be same model and have the same NIC names - 2 Compute nodes will be the same model and have same NIC names This is an ad-hoc change for arm-pod7. Will work for all other setups but the jinja2 logic should be evetually extended to support a per board approach, allowing any board to be any kind Change-Id: Ie994d661e3dbe5b9a33d290a850a6152cf320c86 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2017-12-14Revert "Horizon: service: Default to v2 API"Alexandru Avadanii2-2/+2
Pike Horizon packages contain the fix for full v3 compatibility. Also update the reclass models to use v3 API. JIRA: FUEL-284 This reverts commit 68ff467c4c2d9d0f201e2912c97616402f8109a3. Change-Id: I7795197100a67f892889eefce73252ec90d289cc Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-12-13[baremetal] Link br-ex as ovs portMichael Polenchuk1-24/+9
Add br-ex and physical public interface as ports directly to ovs bridge. Change-Id: I12c078d3e286af7c5fa3078cc055905c03cf600b Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-12-12Merge "[baremetal] Move all MaaS PXE net config to PDF"Alexandru Avadanii5-17/+10
2017-12-12Merge "[baremetal] Fixup pike deployment (2)"Alexandru Avadanii1-0/+5
2017-12-12[baremetal] Fixup pike deployment (2)Michael Polenchuk1-0/+5
* align dpdk packages list * add missing libvirtd group to vcp host nodes Change-Id: Ideab2b16ca0561035b225e58bf3d0c5653d303bb Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>