aboutsummaryrefslogtreecommitdiffstats
path: root/mcp/config
AgeCommit message (Collapse)AuthorFilesLines
2017-10-19[virtual] Rise memory for ovs/dpdk scenarioMichael Polenchuk1-2/+2
Let's add more hugepages/memory to the compute nodes since snaps_smoke required 2Gb flavor for tests. Change-Id: If52f30d53a6469abeca67aaf2bdee551542d1653 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-19[baremetal] Remove infinite loops from node checksAlexandru Avadanii2-5/+10
Change-Id: I7a21c30d49aecca948f45535fec164c2f643450e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19[baremetal] cmp: run linux.network before rebootAlexandru Avadanii1-0/+1
The recent addition of `linux.system`, combined with `system.reboot` for the baremetal compute nodes leaves compute nodes unconfigured after reboot. Run `system.network` too, but expect a failure (only for DPDK, which requires hugepages to be already active, hence a prior reboot). Fixes: 64920b8 Change-Id: I8c73b24ae15e1f87dee64ae2aba7af86db1e942f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19[baremetal] maas state: Wait for all nodes onlineAlexandru Avadanii1-0/+13
After MaaS reports baremetal provisioning finished successfully, check that all nodes are online before attempting a `sync_all`. Change-Id: I6ba4b3e4ba5b5258ace4da8c39e0fc77354885e3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-19[baremetal] maas state: Retry sync_all on failureAlexandru Avadanii1-1/+1
Change-Id: Ib4aa3f2cb4fc7129d502b4332cd7fedd83a0e1fe Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-18[baremetal] PDF-based network configAlexandru Avadanii1-0/+23
This change extends current PDF/IDF support with: - dynamic interface / vlan definition; - dynamic interface and/or bridge allocation of installer networks on top of interfaces (physical or vlans); This allows us to drop hardcoded interface names and vlan / bridge configuration in favor of a runtime determined model based on PDF/IDF. For now, we duplicate common jinja variable definitions in each template, but this will later be moved to a common include file. JIRA: FUEL-275 Change-Id: Ia80a66dbdf898b0bd0a4fb99d069ce9ebe33fa65 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-16[baremetal] Fix DPDK by running linux.system firstAlexandru Avadanii1-2/+4
DPDK scenario requires hugepages to be set up and enabled before configuring OVS ports, so apply `linux.system` on compute nodes and reboot them before attempting to run `linux.network` state. Change-Id: I2b685361b07727a4740a3676c5f219a6443d1cf2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-16Return back glusterfs client stateMichael Polenchuk1-1/+1
In order to set properly keystone fernet keys, apply glusterfs client state before second keystone server state. Also leave out user/group settings for glusterfs volume of nova instances as it will be set later by nova compute packages themselves. Change-Id: I069e37c67f08c51ed29f45cf6f92d4a00a1ac97b Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-15states: Break on error, retry states up to 5 timesAlexandru Avadanii8-10/+26
While applying scenario states, break on error, and retry failed state up to 5 times. Apply the same behavior for `salt.sh`. Add new deploy parameter, '-D', backed up by 'CI_DEBUG' env var, which gates deploy sh scripts logging (set -x). Also extend '-f' deploy parameter, allowing it to be specified more than once; the first occurence will skip infra VM creation, but still sync reclass & other config from local repo, while a second occurence will also disable config sync. To prevent glusterfs client state from failing due to non-existent nova user/group, move it after nova:compute's nova state is applied. Change-Id: I234e126e16be0e133d878957bd88fed946955de8 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-14Add license headers where missingAlexandru Avadanii20-18/+134
While at it, compact 'set' into bash shebang where possible and add `make patches-copyright` target to simplify adding patch license headers. Change-Id: I0c841de72e5709e5eef915a52c5ec4a7fc0f7c37 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-14Drop infinite loops in favor of finite wait_forAlexandru Avadanii4-7/+14
While at it, fix some shellcheck warnings, and s/fgrep/grep -F/g. Change-Id: I093b7b4c196731b1ecc0c27a4111955b2e412762 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-14states: Split virtual_control_plane from maasAlexandru Avadanii6-50/+48
We should eventually also support baremetal deploys without a virtualized control plane (VCP), so decouple MaaS provisioning from VCP provisioning. While at it, move "wait_for" bash function from maas state to common library file, lib.sh. Change-Id: I32c33135655cb6aceae901a5f92b51265a8c84b4 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-06Update opendaylight version to nitrogenMichael Polenchuk1-0/+1
* use pseudo agentdb port binding controller instead of the deprecated network topology one * disable superfluous l2population mechanism driver * tidy up the duplicated haproxy neutron listen opts * straighten karaf features list * update jetty config Change-Id: Ifacf8de11eb56ab72df13a312151a510b280dea2 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-04Merge "Identify jump host bridges based on IDF / PDF nets"Alexandru Avadanii1-0/+12
2017-10-04[ovs/dpdk] Add missing rootwrap sudoers policyMichael Polenchuk1-0/+1
Append required sudoers rule since uca package version of neutron has no policy for neutron-rootwrap-daemon. Change-Id: Id8ea5b1b6aadb9eca879d72ce4d158a7bc01060e Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-10-03Identify jump host bridges based on IDF / PDF netsAlexandru Avadanii1-0/+12
- minor refactor of runtime templates parsing to allow var expansion; - parse <pod_config.yml> into shell vars, match dynamically networks from PDF to IP addresses on bridges of current jumphost; - keep old '-B' parameter in <ci/deploy.sh>, use it for providing fallback values in case there's no bridge name specified via IDF and no IP on the jumphost for one or more of the PDF networks; - re-enable dry-run to ease testing of the above; - add sample 'idf-pod1.yaml' to <mcp/config/labs/local>; The new behavior will try to determine the jump host bridge names: 1. Based on IDF mapping, if available 2. Based on PDF network matching with IP addrs on jumphost; 3. Fallback to values passed via '-B'; 4. Fallback to default values hardcoded in the deploy script; Later, we will drop MaaS network env vars in favor of PDF vars, once the PDF template is generating them. Change-Id: If9cd65d310c02965b2e2bfa06a0d7e0f97f1dd48 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-10-02Align salt version & reposMichael Polenchuk1-4/+0
Change-Id: If7cb8473f5c290d1d5f22fce5567f7b8da24fd9f Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-27PDF parsing supportAlexandru Avadanii1-0/+226
- add new git submodule pointing to OPNFV Pharos; - use Pharos 'generate_config.sh' to parse the PDF using the Fuel installer adapter and generate <pod_config.yml> dynamically; - build <pod_config.yml> outside current git repo and sync separately to prevent sensitive data leak; - add <pod1.yaml> PDF sample based on LF-POD2, should be used with 'ci/deploy.sh -l local -p pod1'; Change-Id: I4e1b95f180bcd5ade5d86f516628eb8edbe64b1c Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-26[virtual] Switch compute nodes to uca repoMichael Polenchuk2-4/+2
Test of snaps_health_check gets console output of instance, which is empty (https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1667033), therefore take affected packages of computes from UCA repo. Change-Id: I4e13a40dd47caf305efd9f393b3c3cf5a17ef312 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-25Merge "states: maas: Dynamic node count in stop condition"Alexandru Avadanii1-1/+4
2017-09-25Merge "Fix or silence all yamllint warnings"Alexandru Avadanii8-2/+10
2017-09-25Run packages upgrade on openstack nodes onlyMichael Polenchuk1-2/+2
Change-Id: I53ac0be519df1bb39a6a56e236285fce95228bd4 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-25Fix or silence all yamllint warningsAlexandru Avadanii8-2/+10
Change-Id: Iface28ab770beee00374afb902ef4f9c983538f5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-24states: maas: Dynamic node count in stop conditionMichael Polenchuk1-1/+4
Change-Id: I7fe8d0c77a1d62e2214fb1089651a639303dd20e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com> Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-23Workaround VCP minions timeout post pkg.upgradeAlexandru Avadanii1-2/+4
pkg.upgrade was enabled for all salt minions, including VCP VMs, which take longer to perform the operation, probably due to an older set of packages in the Ubuntu disk image we use. One way to work around this is to switch to UCA Xenial image, and let Salt pre-provising salt minion on it, but that adds deploy time delay and has caused issues in the past (should be ok now). Alternatively, we can retry the pkg.upgrade until all minions respond, before moving on with the state execution. This prevents silently skipping the next salt calls (e.g. installing keepalived). Note that the issue did not manifest for OVD-DPDK, where after pkg.upgrade, DPDK is installed, giving VCP VMs enough time to return. While at it, retry 'salt.control' state apply too (non-critical, but it fails every once in a while). Fixes: 87310fb Change-Id: I97acc2b23206a55d72f7e6583ca42127fdbacc16 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-22states: maas: Add 30s delay in re-deploy attemptAlexandru Avadanii1-0/+2
Occasionaly, MaaS fails to provision/deploy some nodes, in which case we try marking them as broken, then fixed (to put them again in 'ready' state); before re-attempting the MaaS deploy operation. However, this leads to 'Error: Internal server error' when deploy function is called right after transitioning the node to 'ready' state. Add a delay of 30 seconds before re-attempting the failed operation. Change-Id: Ia9ecec67639387e4a29feab3114e1741c554a2cb Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-22Adjust memory allocation sizeMichael Polenchuk4-3/+15
* [baremetal] add memory to contollers & salt master * tune up sysctl vm.dirty* for compute nodes * upgrade packages to get the latest versions (https://bugs.launchpad.net/cinder/+bug/1641312) Change-Id: I9ad22206f2f3f11e1da3f93c7a0931c592adf1cf Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-13Merge "[virtual] Setup nfs for nova instances"Alexandru Avadanii1-0/+4
2017-09-13[baremetal] Setup glusterfs for nova instancesMichael Polenchuk1-1/+1
Live-migration feature requires shared storage on compute nodes, so configure glusterfs volume for nova instances. Change-Id: Id6b9b5aad89f5b4aefbef71e4ba7247a441873b0 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-13[virtual] Setup nfs for nova instancesMichael Polenchuk1-0/+4
Configure nfs shared storage for nova instances to support live migration feature. Change-Id: I777d5725e45d03325507d3ecc8dd59a28cbc188f Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-12reclass, states: Parametrize runtime configurationAlexandru Avadanii1-2/+1
mcpcontrol virsh network, as well as MaaS PXE network are installer specific, and not POD specific. Therefore, these should be easily parametrized without the PDF, using only installer inputs (e.g. env vars passed via Jenkins). - add new <all-mcp-ocata-common.opnfv.runtime> reclass class; - parametrize at runtime new reclass class based on global vars; - factor out MaaS deploy address / config using new mechanism; - parametrize at runtime virsh network definitions based on template; - add new "maas.pxe_route" sls for configuring routing on cfg01; - replace env vars with the new sls in "maas" state; NOTE: baremetal parametrization will be handled later. Change-Id: Ifd61143d818fb088b3f4395388ba769bbc49156e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11salt master, maas: Move mcpcontrol to 10.20.0.0/24Alexandru Avadanii1-1/+1
Use INSTALLER_IP Jenkins param instead of SALT_MASTER_IP, allowing us to drop SALT_MASTER_IP completely from releng. mcpcontrol IP changes: - 192.168.10.100 becomes 10.20.0.2 (align with legacy Fuel master); - 192.168.10.3 becomes 10.20.0.3 (baremetal MaaS address); JIRA: FUEL-285 Change-Id: I6e2d44c3a8b43846196bd64191735214167a76ce Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11README files: Convert from markdown to RSTAlexandru Avadanii1-0/+1
Change-Id: I176f583e8adb7ba717932de7c27283f696ded548 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11Merge "Add & fix licensing in README.rst files, align ext"Alexandru Avadanii1-7/+6
2017-09-11Merge "os_cacert: Parametrize VIP used in path by cp.push"Michael Polenchuk1-1/+4
2017-09-11Merge "scenario: Add AArch64 defaults"Michael Polenchuk2-2/+2
2017-09-11Add & fix licensing in README.rst files, align extAlexandru Avadanii1-7/+6
Rename all variations of README files to README.rst. Fix license headers according to OPNFV Contribution Guidelines [1]. Markdown syntax will be switched to rst in an ulterior change. [1] https://wiki.opnfv.org/display/DEV/Contribution+Guidelines Change-Id: I2c71fd62b38f218545507c79c39e07dbd35f7c88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-10os_cacert: Parametrize VIP used in path by cp.pushAlexandru Avadanii1-1/+4
JIRA: FUEL-274 Change-Id: Ia77948ba3e99c47aa86fcca20c67d80e2e761208 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-10scenario: Add AArch64 defaultsAlexandru Avadanii2-2/+2
Move scenario defaults.yml out of virtual/baremetal dirs, unifying them into a single, arch-specific defaults configuration file. Add AArch64 equivalent config, and arch-qualify default filename. For AArch64, bump VCPU number from 2 to 6. Change-Id: If9b39850af96e4c46e868b1d532bd301f9fd9f26 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-08bash scripts: Fix remaining shellcheck warn/errsAlexandru Avadanii2-3/+8
Fix/silence all shellcheck errors, except for scripts in <prototypes/sfc_tacker>. Change-Id: Idc317cdba0f69b78299f2d3665e72ffc19dd8af5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-08[ovs/dpdk] Mend dpdk settingsMichael Polenchuk2-0/+11
* add vcpus to virtual compute * re-pin dpdk core & pmds * switch to UCA repos * disable apt-daily cron job Change-Id: Ia23100b846d8954e3d5e8a264a6b8518402b2fa6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-07Merge "cleanup: Rename ODL-L3 to ODL, drop ODL-L2"Alexandru Avadanii3-22/+0
2017-09-06Initialize mongodb clusterMichael Polenchuk1-1/+5
* wait for mongodb service ready state * run rs.initiate() to start a replication set Change-Id: Ia9d2357d2ce0e9ba92a6be3d8b6c068efaa10822 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-05cleanup: Rename ODL-L3 to ODL, drop ODL-L2Alexandru Avadanii3-22/+0
JIRA: FUEL-279 Change-Id: Ia8bed5e09937a1ffd29a15d40f610d4b0c8f0a17 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-05[baremetal] Enable ceilometer/aodh servicesMichael Polenchuk1-0/+5
Change-Id: I34706afbdbcbdaace0b0ae6c2c2e8cb932812d4e Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-30Fix ssl cert upload pathMichael Polenchuk1-2/+2
JIRA: FUEL-274 Change-Id: I8e947009399a995474ed0088d56da04755d278df Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-30states: maas: Retry linux state if no responseAlexandru Avadanii1-1/+2
JIRA: FUEL-283 Change-Id: Ie85af8c12163fac28cb8826aa8902a4ff3dec623 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-29[virtual] Apply ceilometer/aodh servicesMichael Polenchuk1-0/+5
* run ceilometer/aodh states * wrap common virtual cluster options * get the source image based on timestamps Change-Id: I88f1d63ed4a94eba4ec0a9cf33d36d51c75ae355 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-28Sync os cacert from proxy to salt masterMichael Polenchuk1-0/+3
JIRA: FUEL-274 Change-Id: I2c8161b24cb18a0d1f9dc6fd509ce18af7ea8cf5 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-28[baremetal] Add required user on vcp nodesMichael Polenchuk1-6/+6
* add user of "ubuntu" so that functest gets cluster credentials * reduce cpu resources for vcp nodes in nofeature scenario * tune salt targets for maas state * specify ntp servers Change-Id: I433a1de1cd2c69c6747c62c3359f5485dee3bfa4 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>