Age | Commit message (Collapse) | Author | Files | Lines |
|
Test of snaps_health_check gets console output of instance, which is
empty (https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1667033),
therefore take affected packages of computes from UCA repo.
Change-Id: I4e13a40dd47caf305efd9f393b3c3cf5a17ef312
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
|
|
Change-Id: I53ac0be519df1bb39a6a56e236285fce95228bd4
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Iface28ab770beee00374afb902ef4f9c983538f5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I7fe8d0c77a1d62e2214fb1089651a639303dd20e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
pkg.upgrade was enabled for all salt minions, including VCP VMs,
which take longer to perform the operation, probably due to an
older set of packages in the Ubuntu disk image we use.
One way to work around this is to switch to UCA Xenial image, and
let Salt pre-provising salt minion on it, but that adds deploy
time delay and has caused issues in the past (should be ok now).
Alternatively, we can retry the pkg.upgrade until all minions
respond, before moving on with the state execution. This prevents
silently skipping the next salt calls (e.g. installing keepalived).
Note that the issue did not manifest for OVD-DPDK, where after
pkg.upgrade, DPDK is installed, giving VCP VMs enough time to return.
While at it, retry 'salt.control' state apply too (non-critical,
but it fails every once in a while).
Fixes: 87310fb
Change-Id: I97acc2b23206a55d72f7e6583ca42127fdbacc16
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Occasionaly, MaaS fails to provision/deploy some nodes, in which
case we try marking them as broken, then fixed (to put them again
in 'ready' state); before re-attempting the MaaS deploy operation.
However, this leads to 'Error: Internal server error' when deploy
function is called right after transitioning the node to 'ready'
state.
Add a delay of 30 seconds before re-attempting the failed operation.
Change-Id: Ia9ecec67639387e4a29feab3114e1741c554a2cb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* [baremetal] add memory to contollers & salt master
* tune up sysctl vm.dirty* for compute nodes
* upgrade packages to get the latest versions
(https://bugs.launchpad.net/cinder/+bug/1641312)
Change-Id: I9ad22206f2f3f11e1da3f93c7a0931c592adf1cf
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Live-migration feature requires shared storage on compute nodes,
so configure glusterfs volume for nova instances.
Change-Id: Id6b9b5aad89f5b4aefbef71e4ba7247a441873b0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Configure nfs shared storage for nova instances
to support live migration feature.
Change-Id: I777d5725e45d03325507d3ecc8dd59a28cbc188f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
mcpcontrol virsh network, as well as MaaS PXE network are installer
specific, and not POD specific.
Therefore, these should be easily parametrized without the PDF,
using only installer inputs (e.g. env vars passed via Jenkins).
- add new <all-mcp-ocata-common.opnfv.runtime> reclass class;
- parametrize at runtime new reclass class based on global vars;
- factor out MaaS deploy address / config using new mechanism;
- parametrize at runtime virsh network definitions based on template;
- add new "maas.pxe_route" sls for configuring routing on cfg01;
- replace env vars with the new sls in "maas" state;
NOTE: baremetal parametrization will be handled later.
Change-Id: Ifd61143d818fb088b3f4395388ba769bbc49156e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Use INSTALLER_IP Jenkins param instead of SALT_MASTER_IP, allowing
us to drop SALT_MASTER_IP completely from releng.
mcpcontrol IP changes:
- 192.168.10.100 becomes 10.20.0.2 (align with legacy Fuel master);
- 192.168.10.3 becomes 10.20.0.3 (baremetal MaaS address);
JIRA: FUEL-285
Change-Id: I6e2d44c3a8b43846196bd64191735214167a76ce
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I176f583e8adb7ba717932de7c27283f696ded548
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
|
|
Rename all variations of README files to README.rst.
Fix license headers according to OPNFV Contribution Guidelines [1].
Markdown syntax will be switched to rst in an ulterior change.
[1] https://wiki.opnfv.org/display/DEV/Contribution+Guidelines
Change-Id: I2c71fd62b38f218545507c79c39e07dbd35f7c88
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-274
Change-Id: Ia77948ba3e99c47aa86fcca20c67d80e2e761208
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Move scenario defaults.yml out of virtual/baremetal dirs, unifying
them into a single, arch-specific defaults configuration file.
Add AArch64 equivalent config, and arch-qualify default filename.
For AArch64, bump VCPU number from 2 to 6.
Change-Id: If9b39850af96e4c46e868b1d532bd301f9fd9f26
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Fix/silence all shellcheck errors, except for scripts in
<prototypes/sfc_tacker>.
Change-Id: Idc317cdba0f69b78299f2d3665e72ffc19dd8af5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* add vcpus to virtual compute
* re-pin dpdk core & pmds
* switch to UCA repos
* disable apt-daily cron job
Change-Id: Ia23100b846d8954e3d5e8a264a6b8518402b2fa6
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
* wait for mongodb service ready state
* run rs.initiate() to start a replication set
Change-Id: Ia9d2357d2ce0e9ba92a6be3d8b6c068efaa10822
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-279
Change-Id: Ia8bed5e09937a1ffd29a15d40f610d4b0c8f0a17
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I34706afbdbcbdaace0b0ae6c2c2e8cb932812d4e
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-274
Change-Id: I8e947009399a995474ed0088d56da04755d278df
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-283
Change-Id: Ie85af8c12163fac28cb8826aa8902a4ff3dec623
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* run ceilometer/aodh states
* wrap common virtual cluster options
* get the source image based on timestamps
Change-Id: I88f1d63ed4a94eba4ec0a9cf33d36d51c75ae355
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-274
Change-Id: I2c8161b24cb18a0d1f9dc6fd509ce18af7ea8cf5
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* add user of "ubuntu" so that functest gets cluster credentials
* reduce cpu resources for vcp nodes in nofeature scenario
* tune salt targets for maas state
* specify ntp servers
Change-Id: I433a1de1cd2c69c6747c62c3359f5485dee3bfa4
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Ia0d828fa31549a12b6740e0edeeba2ab13a9b998
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
|
|
While at it, parametrize max attempt number in maas state's "wait_for",
and reduce retries count for certain simpler tasks.
Change-Id: I3ac2877719cdd32613bcf41186ebbb9f3f3aee93
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Since we don't `set -e` in state files, applying each state will
always succeed unless the last instruction in the state fails.
Make this uniform by always succeeding in applying the state.
While at it, enable bash debugging logs, for better readability
of deploy log files.
Change-Id: I3cf4886f6d73c6fd1380df1a4e1413334bec1701
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I3a9bb25fc7514055da588b9047f61af178eff222
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Add our mcp.rsa.pub RSA key to all nodes, including VCP VMs.
This is required for functest to be able to fetch openrc.
While at it, add retry wrappers for more VCP VM state.sls calls.
Change-Id: I34f79848c52e36de8d981055880321a081420874
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>
|
|
Determine public network based on public IPs of compute nodes.
Change-Id: I5a6b29a0458b0b839f8fdb3e32616a41d7a621f7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I01744bd5728d6fc4c8cd3792aee9759434d18645
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* shift vcp nodes interfaces since names started from ens2
* add extra salt sync before vcp start up
* run rabbitmq state on 1st node beforehand then the rest
Change-Id: Ic2c174c288a5e89f2f28c0d9aa573340190a61d3
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Replicate all calls from "openstack" state to "openstack_ha",
while adjusting minor parameters for HA, based on [1].
[1] https://docs.mirantis.com/mcp/1.0/mcp-deployment-guide/\
deploy-mcp-cluster-manually.html
Change-Id: Iaf2262fa9c54f2401b69635ff46329ffb856f802
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Running a heavy state like `linux` on all nodes (including VCP VMs)
might time out the first time on slower systems.
Change-Id: I21a3ad380afafa833f59e14da86aff92e254e9c7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Remove keys that are left over from the previous deployment
to avoid interfere with the new ones.
Change-Id: I0dfa9782cbce9a8e8b7c1efe5954c8ffe85996f9
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I86bb27b323152440e8a885dbf867da433a288dae
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Ic47a9dd2d5a4cccc9c4330509d81aba82f777084
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Previous changes attempted to add 'noifupdown' support, but failed
to spell it correctly. Fix the typo and also edit the 'maas' state
to use simple `salt state.apply` instead of `cmd.run 'salt-call'`.
Change-Id: If9889dee896fa100febe0372fe2c4173fc223ee3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
* re-assign ip from interface to bridge
- install bridge utils
- make a reboot straight away after network config
* change image source for vcp
Change-Id: I34506ee161337b5d3a4088cfdf3c082d99ccb695
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|