Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 7522bdb0e898144da2b6dc361dbdd549b39bc025.
The original patch has been merged (https://review.opendev.org/661011)
Change-Id: I9a1c04590145800523d546e36e9462fa7074922c
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit 61c1ff928d01e4d18589877c455c57c802cdecc5)
|
|
Hugepage count has been recently bumped for virtual PODs via IDF
changes in Pharos, so align our FDio scenarios with the new RAM
requirements.
While at it, fix wrong pod_config template evaluation by moving it
after the templated scenario files are expanded, since pod_config
relies on scenario node definition.
Also, configure VPP to use decimal interface names by default to
align with Pharos macro for the VPP interface name string.
Change-Id: Ib3a89c294a3a2755567fdbe07e3be2b8ca1a5714
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit b381277ae274473ae4e05a1aa9dd171dbab461d6)
|
|
NOTE: only os-nosdn-nofeature-noha is parameterized for now.
- move config drive & disk creation from prepare_vms to create_vms;
- make default disk size(s) configurable based on scenario defaults
and vPDF;
* compute nodes require 2 disks to be defined in vPDF, since the
pillar reclass model assumes /dev/vdb is reserved for cinder;
* if multiple disks are defined in vPDF, they are created and
attached accordinly (only ctl01 and cmp nodes are parameterized
in this change; only for the os-nosdn-nofeature-noha scenario);
- vCPU specifications are deduced based on vPDF (sockets, cores);
* threads/core is hard set to 2 since vPDF does not have a key
for it;
* NUMA resources are distributed evenly based on the number of
sockets configured in PDF;
* no less than the mininum requirement for a scenario is allocated
(e.g. if PDF specifies 2 cores, but the scenario requires at
least 4 cores, the larger value will be used);
- RAM is deduced based on PDF (but no less than the mininum req is
allocated, e.g. if PDF specifies 2GB RAM for computes, but the
scenario requires at least 8GB, the larger value will be used);
Change-Id: I97188aa2a1006865b8429eb6483e10c76795f7d2
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit 9e5b19768d6eb9b32564240065ecba6c791cac12)
|
|
|
|
Change-Id: Id49f26a2615e2fc06e94eeaf2e9200e83625e6c9
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit 7522bdb0e898144da2b6dc361dbdd549b39bc025)
|
|
Deploy the OpenStack API services based on roles to
prevent issues with absent database tables since db_sync
runs only on the nodes with primary role.
Change-Id: I04cf3ce0dd59afd93b8a0dfcf060fbd7e7411c82
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit 07d70f192a8d296ad9a94b992d6d6f41191e290b)
|
|
Previously we only synced the scripts subdir, but going forward
we will need the full contents of the IEC repo on all cluster nodes.
Change-Id: I88edd4885875048d50d28c1eac9fd413dc2b6ffb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit 86024c54e879c6435f1e6c82c0fb1a680050052d)
|
|
There is no enough memory (default 4k pages) for services
like libvirt, which cannot fork child processes.
Change-Id: I44d8efd7cafb52a7c823c02738c1d321017aa7a3
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
The per port memory model provides a more transparent memory usage model
and avoids pool exhaustion due to competing memory requirements for
interfaces. (http://docs.openvswitch.org/en/latest/topics/dpdk/memory/)
Change-Id: I5add0f49cdcdf2fc3d24affee10a275abe3ca46a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
- bump Pharos git submodule to allow PODs with fewer nodes;
- add `k8-calico-iec-noha` scenario definition for Akraino
IEC basic configuration;
- add `k8-calico-iec-vcp-noha` scenario definition for Akraino
IEC nested (virtualized control plane) configuration;
- add `akraino_iec` state, which will leverage the Akraino IEC
bootstrap scripts from [1];
- replace system.reboot salt call with cmd.run 'reboot' as it's more
reliable;
- use kernel 4.15 for AArch64 K8 IEC scenarios;
NOTE: These scenarios will not be released in OPNFV since don't rely
on Salt formulas but instead of Akraino IEC scripts to install K8s.
[1] https://gerrit.akraino.org/r/#/q/project:iec
Change-Id: I4e538e0563d724cd3fd5c4d462ddc22d0c739402
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I2b41ce2e275bb053fa2590654ea7fa432b0c857f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
This reverts commit ac56d7b14f46b05f497b3dca4b6a4b0bfedd83e2.
The original patch has been merged (https://review.openstack.org/643011)
Change-Id: I3a7cd825f371e375d36256143b4b8c91f90ee26e
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* update gnocchi to 4.3
* remove outdated ceilometer api
Change-Id: I7adaf3ddc76d93531b6b0997b684672b80f2992f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Also re-align resources for virtual scenarios.
Change-Id: Id0d55407fd5b1720a24e30c364219f8b08e89d06
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Bug: https://bugs.launchpad.net/nova/+bug/1809123
Change-Id: I14622c21826aeeddac6ea7bf7f9d116cd3e68cfb
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: Ifc4fff90551344c69295990b220f0778967887a4
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
- replace mas01 VM with a Docker container;
- drop `mcpcontrol` virsh-managed network, including special handling
previously required for it across all scripts;
- drop infrastructure VMs handling from scripts, the only VMs we still
handle are cluster VMs for virtual and/or hybrid deployments;
- drop SSH server from mas01;
- stop running linux state on mas01, as all prerequisites are properly
handled durin Docker build or via entrypoint.sh - for completeness,
we still keep pillar data in sync with the actual contents of mas01
configuration, so running the state manually would still work;
- make port 5240 available on the jumpserver for MaaS dashboard access;
- docs: update diagrams and text to reflect the new changes;
Change-Id: I6d9424995e9a90c530fd7577edf401d552bab929
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
In order to mitigate live migration procedure make VIF plugging
event non-fatal for nova-compute. Also align max value of memory
for instance of ODL controller.
Change-Id: I0d00cc97c652eef3bd3404fac4715e2e7f2f02c7
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Fix broken systemd service unit dependecies:
- OVS should start before networking service;
- OVS ports & bridges should not be automatically ifup-ed by
networking service to avoid races, so drop 'auto' for both
(OVS ports are automatically handled when part of an OVS bridge);
- explicitly ifup OVS bridges as part of networking service, but
after all Linux interfaces have been handled;
- use 'allow-ovs br-prv' to let OVS handle br-prv and avoid another
race condition;
While at it, fix some other related issues:
- make OVS service start after DPDK service (if present);
- bump OVS-DPDK compute VMs RAM since since switching from MTU 1500
to jumbo frames for virtual PODs a while ago failed to do so [1];
- avoid creating conflicting reclass linux.network.interfaces entries
for OVS ports by using their name (drop 'ovs_port_' prefix):
* for untagged networks they will override existing common defs;
* for tagged networks, they will create separate entries;
- DPDK scenarios: make gtw01 br-prv members OVS ports to avoid race
conditions after node reboot by letting OVS handle them;
[1] https://developers.redhat.com/blog/2018/03/16/\
ovs-dpdk-hugepage-memory/
Change-Id: I0266ba67f3849b6f7e331a758146b331730bae55
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
MCP repos no longer publish arm64 metadata, so drop our patch that
selected arm64 metadata on arm64 systems.
Instead, let it default to 'deb [arch=amd64]', which will allow
arm64 systems to fetch amd64 metadata and inherintely fetch all
arch-independent packages from the same repos.
While at it, switch to 'rocky-armband' repos on arm64 systems.
Change-Id: I07fda895f5162bfa576c62336cbb4d74e985f37a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
The armband formula already has checks in place to run only on
nodes with the expected arch, so remove the duplicate condition
in state files.
Change-Id: I05b26368a2d97422830a692e09242bc50e4eb1db
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- cmp, gtw: bump RAM allocation to accomodate hugepages/VPP;
for now we overcommit, gtw01 resources can probably be lowered;
- submodule: add salt-formula-neutron so we can locally patch it;
- repo:
* FD.IO repos for VPP packages;
* networking-vpp PPA for python-networking-vpp Neutron driver;
- use vpp-router for L3, disable neutron-l3-agent;
- baremetal_init: apply repo config before network (otherwise UCA
repo is missing when trying to install DPDK on baremetal nodes);
- arm64: iommu.passthrough=1 is required on ThunderX for VPP on
newer kernels;
Design quirks:
- vpp service runs as 'neutron' user, which does not exist at the
time VPP is installed and initially started, hence the need to
restart it before starting the vpp-agent service;
- gtw01 node has DPDK, yet to configure it via IDF we use the
compute-specific OVS-targeted parameters like
`compute_ovs_dpdk_socket_mem`, which is a bit misleading;
- vpp-agent requires ml2_conf.ini on ALL compute AND network nodes
to parse per-node physnet-to-real interface names;
- vpp process is bound to core '1' (not parameterized via IDF);
Change-Id: I659f7dbebcab7b154e7b1fb829cd7159b4372ec8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
The BindToDevice=lo option has been removed from epmd.socket:
https://bugs.launchpad.net/ubuntu/+source/rabbitmq-server/+bug/1808766
Change-Id: Ib92eaf5efababd37963745bdb8e3ad9354045449
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: If4f4eb08c54ba8265ac178f215384d8a749d1b8b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
This commit should be reverted once original formulas
get required support of rocky version.
Change-Id: Ia3458381bced0cae8dbfacc9781c90933ad5c822
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Change-Id: I88f28370180278c4b32599b83eebbb0ee005c936
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-364
Change-Id: Ia470fc8103713e7a06cd9647675b0edfb4342bf8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
While at it, rename FDIO (VPP) scenarios to align with OPNFV FDS
and OPNFV Apex projects.
Change-Id: I9aab5dc4a0dc41a2cc996687a8a2726d03288678
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Currently, PXE/admin on VCP nodes still uses MaaS DHCP before
the new network configuration is enforced. A live network
refresh would break minion registration with the Salt master,
so perform a node reboot instead.
Change-Id: I1c25f63f6c98a9fff98108d3fad9550dd4468355
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Instead of matching the hostname to determine the primary barbican
node, rely on pillar data.
While at it, apply the same logic to nova:controller states.
Change-Id: Ia4ac391927a8b4b223febff106b400e84d264f7a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Ensure installation happens first on node 1 first,
run as batch on the rest after.
Change-Id: I1ac3f516c35c4941b343e88d47c78b19d13d7b90
Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
|
|
Patch introduces a new specific scenarios os-nosdn-onap-*ha
for automatic ONAP deployment on top of the OPNFV installation.
Deployment and configuration of ONAP is managed by OPNFV Auto project.
New scenarios are based on generic os-nosdn-nofeature-*ha scenarios.
Auto project is responsible for os-nosdn-onap-*ha development
and maintenance.
JIRA: AUTO-71
Change-Id: I8b177668d856f30b62d1d135b80a95c32ebb9937
Signed-off-by: Martin Klozik <martin.klozik@tieto.com>
|
|
|
|
Change-Id: I6d2fab853b25d2f235e27c83a355ebc2c520771c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
libvirt postinstall script configures `virbr0` by default, which we
later remove & disable. However, on network creation, libvirt also
enables ip_forward, so re-run kernel.sls to force it to 0 without a
reboot.
Change-Id: Ie27fbf995c10ad9cd0fa0c28c29bd88161f04fd7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
To conform to the changes in networking-odl driver:
https://review.openstack.org/604755
Change-Id: I6aaefe9d6d4f26652464f82b7c7e45694387c8af
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
- s/Fuel@OPNFV/OPNFV Fuel/g;
- added README files for ci/scenarios/patches directories;
- refresh & simplify cluster overview diagrams;
- unify labels across docs;
- fix TOC numbering;
- remove local labs PDF/IDF files, as they are merely duplicates of
Pharos files included as a git submodule;
JIRA: FUEL-397
Change-Id: I87f61938eeb67f13fd9205d5226a30f02e55d267
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Idf8b4b42dcc68bc55debaac9a8b5f1ca6b5b398e
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Setup haproxy on opendaylight nodes to listen/bind on VIP address.
Keepalived will be checking existence of haproxy daemon.
Change-Id: Ie0a3a6ebb82523388d528529709415644f67a380
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
JIRA: FUEL-393
This patch adds support of os-odl-bgvpn-noha scenario to fuel
installer.
Change-Id: I4e053e38aac70023b0a81f9a41b415c7a1aae3af
Depends-On: I57288bbb42f4c75af19f3807f8f15b44482c066c
Signed-off-by: Stamatis Katsaounis <mokats@intracom-telecom.com>
|
|
`virtual_init` state file tries to ping all FN VMs, but that won't
work on hybrid PODs since all FN VMs but mas01 require MaaS DHCP to
be already configured (i.e. FN VMs in question will be reset after
mas01 is fully configured).
Limit virtual node queries in `virtual_init` to mas01 VM, as the rest
of FN VMs will be handled via `baremetal_init` state.
While at it, move _param:apt_mk_version def to common reclass to
avoid an undef reference in NOHA hybrid deployments; set MCP_VCP to
0 for non-HA scenarios.
JIRA: FUEL-385
Change-Id: I582bca6864e9bfed23baf26f9b66e6e95e986c58
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- bump formulas baseline during docker build;
- refresh patches;
Change-Id: I0a54863f57344c5f8897dc981f704c4d265c5522
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Each compute node has 16 GB of RAM but those GBs are splited wrongly
to each NUMA node (4 GB instead of 8 GB).
JIRA: FUEL-387
Change-Id: Ibe784727c8a262b41add04ad3a41c70f25ded684
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
|
|
* to be compatible with HWE kernel
* make neutron balancing to RR back
* turn off glance v1 api support (doesn't relevant for now)
Change-Id: I916aae10f523be339c20de32218ce03c245afe72
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Install in a local directory a newer version of virt-manager
to workaround obsolete Ubuntu versions lacking --cpu cellN.* support.
This change only affects CPU cfg of virtual compute nodes in
nosdn-nofeature-noha scenarios with:
- set default cpu_topology to dual socket (2 cores, 2 sockets,
2 threads);
- bump default RAM to 16GB;
- define 2 NUMA cells, each with half the resources;
To keep the old behavior available (single socket), a new deploy
argument has been added (`-m`). The RAM change is not configurable
via deploy args.
NOTE: The CPU topology for virtual nodes should later be read from
PDF instead of hardcoding it on a per-scenario basis in the installer.
NOTE: Default 'ram' unit is MiB, while cellN.memory default unit is
'KiB'.
JIRA: FUEL-385
Change-Id: I7ca268b0a2052524cb7187a5cf9b6fa8a382c9f9
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I5aad512b5761deaa30522b6939bf245ecb1ec681
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|