aboutsummaryrefslogtreecommitdiffstats
path: root/deploy
AgeCommit message (Collapse)AuthorFilesLines
2016-06-17virtual_fuel: prepare class to allow multiple bridgesJosep Puigdemont1-8/+13
The VirtualFuel class has now two new methods: del_vm_nics: Deletes all interfaces from the VM. add_vm_nic: Adds a NIC to the VM, attached to the specified bridge. The following method has been deleted: set_vm_nic: implemented with the two new methods Apart from the deleted method, no functionality has been changed. This is just a small but necessary step towards adding support for configuring more than one NIC in the fuel VM. Change-Id: I9f02c8163dfb9768510e78d5d5e77a0bb43306fb Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-17vitual_fuel: set_vm_nic() takes no parametersJosep Puigdemont1-1/+1
Fixes: https://jira.opnfv.org/browse/FUEL-148 Change-Id: Id5a1d710abf425e75b6ff9eaa7b372285e200702 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-16virtual_fuel: add XML tree as attribute of VirtualFuelJosep Puigdemont1-7/+14
With this patch, the VM XML definition tree is an attribute of the object, this way it can be used by all methods without having to re-read the file. Methods added: update_vm_template_file: Flushes the contents of the in-memory XML representation of the VM to the backing file. Change-Id: I18d3f606b0c02cd589cb0f657599e8b03b0e817e Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-16Merge "ipmi_adapter: add delay to stabilize command action"Jonas Bjurel1-0/+1
2016-06-16ipmi_adapter: add delay to stabilize command actionJosep Puigdemont1-0/+1
We should allow the nodes some time to stabilize after sending a command to them. Currently we are checking the status too fast. Change-Id: I26a60d2bb6a43edbec842b727f825057e2778981 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-16Merge "Mask ipmitool credentials"Jonas Bjurel1-3/+4
2016-06-16Merge "Mask impitool credentials"Jonas Bjurel1-7/+15
2016-06-16Merge "Add command line argument masking for exec_cmd"Jonas Bjurel1-4/+19
2016-06-16Merge "Remove unused function: usage()"Jonas Bjurel1-7/+0
2016-06-16Mask impitool credentialsPeter Barabas1-7/+15
Change-Id: I0103082672259eaf4b1c2be8ca3a1236fc6137eb Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-16Mask ipmitool credentialsPeter Barabas1-3/+4
Change-Id: I328432e6b30437e8a83065859cd80358d4c3c468 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-16Add command line argument masking for exec_cmdPeter Barabas1-4/+19
exec_cmd() now takes 2 additional optional arguments: mask_args and mask_str. The former expects an array of positions to mask, the latter expects a string to be used as mask. Change-Id: I445141a68929a0d2837e7692ce8b4d071154cfa7 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-16Merge "Introducing collection of all fuel and stack deployment logs."Jonas Bjurel6-31/+87
2016-06-16Introducing collection of all fuel and stack deployment logs.Jonas Bjurel6-31/+87
The purpose of this patch is to collect all available Fuel snapshots- and stack/node ldeployment logs for later off-line troubleshooting. The intention is that Jenkins, or other deployment robots will be able to collect all logs from the deployment and store it at some repository where developers can fetch it and perform off-line post deployment trouble-shooting. Following script arguments have been added: CI Arg changes: Added an argument to ci/deploy.sh: -L [Deploy log path and file name], E.g. -L ~/jenkins/deploy/deploy-888.log.tar.gz This will create an tar gzip archive at the path and filename pointed out. If -L is not specified, the log archive will be placed under the CI directory with the following name convention: deploy-YYMMDD-HHMMSS.log.tar.gz Fuel Internal deploy changes: Added an argument to ci/deploy.py -log [Deploy log path and file name], E.g. -log ~/jenkins/deploy/deploy-888.log.tar.gz This will create an tar gzip archive at the path and filename pointed out. If -log is not specified, the log archive will be placed under the CI directory with the following name convention: deploy-YYMMDD-HHMMSS.log.tar.gz READY TO MERGE! VERIFIED! Change-Id: Icb75d9d2e66bdd47f75dcca29071943444d5c823 Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
2016-06-16Remove unused function: usage()Peter Barabas1-7/+0
Change-Id: I648821262a7bfd77e59f4411380020c49306ff5e Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-16Add missing package dependency: libyaml-devPeter Barabas1-1/+1
Change-Id: I058f6bc54e1c6b0a0c20eeaa2ea09f2f9a2e80ce Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-15virtual_fuel: initial support for remote libvirtJosep Puigdemont4-5/+95
With this patch it should be possible to create a fuel VM on a remote libvirt server by properly defining the LIBVIRT_DEFAULT_URI [1] environment variable. If the variable is not defined, then there should be no percievable change in behaviour for the script. This patch introduces the ability to create volumes (images) on a remote libvirt host where the Fuel VM is to be deployed. For now the volumes are created by default in a pool named jenkins, but the idea is to allow this to be configured, probably in the POD's DHA file. Since all virsh commands honor LIBVIRT_DEFAULT_URI, we use this environment variable to detect wheter we should create a volume or not. The rationale being that the variable will only be set if the user wants to to do the VM deployment on a remote libvirt host. We need to create a volume because we can not rely on being able to access the remote server's file system directly. The images are then transferred to the libvirt host using virsh commands. All this could also be done using scp and a user directory on the host machine, but using pools allows us to take advantage of libvirt's policies and file permissions. CHANGE: when LIBVIRT_DEFAULT_URI is defined, the script will not check for the presence of the required PXE bridge. This will still be checked when the Fuel VM is started and the bridge not found, but this happens at a later point than it does today. CHANGE: before this patch, the file system image was named like the VM: vm_name.raw. This patch introduces a change and adds a timestamp suffix to the image: vm_name-timestamp.raw. This is so to avoid collisions with an image with the same name on the remote pool (two PODs may be using the same pool). It may also be useful to keep around old file system images. FIXME: This patch requires a pool named "jenkins" in the remote libvirt server, and it will fail if it is not present. This should be configurable. Notice though that we can still define LIBVIRT_DEFAULT_URI as "qemu:///system" to create the Fuel VM on the local host. [1] https://libvirt.org/remote.html#Remote_URI_reference Change-Id: I40925ed31337d3ad9cf505f284f5c3d14e9129a0 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15virtual_fuel: make vm_template an attributeJosep Puigdemont1-6/+5
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15virtual_fuel: factor out image creation into a methodJosep Puigdemont1-1/+6
Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15VirtualFuel: Add temp_dir and vm_name attributesJosep Puigdemont1-6/+9
These two variables are defined in one of the methods right now. They will be useful to other methods too, so we add them as attributes to the object here. Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15ipmi_adapter: simplify, retry if command failsJosep Puigdemont1-59/+42
The method get_node_state has been added to the the IpmiAdapter class. In addition, now the power on/off methods will try several times to perform their IPMI command before giving up, instead of bailing out at the first error. After the power on/off command is completed, the method will wait until the node is in the desired state. NOTE: a command could potentially take several minutes if the defaults are used; each IPMI command can take up to 1 minute, and there can be 3 commands issued per operation, one of them may be retried 20 times with the current defaults. Ideally we would use eventlet or something similar to allow each command a limited time to execute, instead: with eventlet.timeout.Timeout(seconds) as t: power_on/off_command Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15common.py: allow specifying number of attempts in exec_cmdJosep Puigdemont1-7/+17
Some commands executed by exec_cmd may fail because of a temporary cause, and it may be desirable to retry the same command several times until it succeeds. One example of this are the ipmitool commands, which may fail temorarily on some targets if they get too many requests simultaneously. In this patch three new optional parameters are introduced to the function signature, which do not break backward compatibility: attempts: which indicates how many times the command should be run if it returns a non-zero value*, and defaults to 1 (as today). delay: which indicates the delay in seconds between attempts, and defaults to 5 seconds. verbose: It will print the remaining attempts left for the current command if set to True. * It may be desirable to add yet another parameter to indicate what return value should be considered an error, but non-zero for now seems a reasonable default. Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15deploy: ipmi adapter: Add <port> config support.Alexandru Avadanii3-3/+8
Sometimes the IPMI lanplus protocol listens on a non-standard remote port, e.g. when target nodes are interfaced through a fake IPMI BMC application that listens on multiple ports on the same IP address. Therefore, allow setting IPMI port in the DHA using a new property named `ipmiPort`, and pass it along to `ipmitool` when set. CHANGE: get_access_info now also supports specifying the IPMI port to use with `ipmitool` by configuring the `ipmiPort` property in the DHA. hp_adapter.py: updated `get_access_info` return signature with the new (unused there) `ipmiport`. Change-Id: I620176bd7f466aa460518cf12d15ccbe86a22560 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-06-15build and deploy onos plugin for fuel9wuwb19894-12/+50
Change-Id: I04dd8b4bdddc5678b158d7287c6ffc52d1bce135 Signed-off-by: wuwb1989 <wuwenbin2@huawei.com>
2016-06-14Merge "Update configuration for fuel 9 virtual deployment in Huawei-China."Jonas Bjurel2-77/+62
2016-06-14Fixing erroneous hypervisor typeStefan K. Berg1-1/+1
A "qemu" snuck in instead of "kvm". Change-Id: Ibe704103cd1bab6e127a31d08d53f53518033539 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-06-14Update configuration for fuel 9 virtual deployment in Huawei-China.wuwenbin22-77/+62
Change-Id: I9d2fc979886510c165af8dbac93ddcdc954727cf Signed-off-by: wuwenbin2 <wuwenbin2@huawei.com>
2016-06-13Updated devel-pipeline DEA overrides for Fuel 9.0Stefan K. Berg2-79/+63
Minor fix in the ELX version. Update to Fuel 9.0 in the default version. Change-Id: Ic084b86e7f6d2dfc3d15b10f0ef72e04ef2b7bf6 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-06-13Modification of deployment config for Fuel 9 and ELX labStefan K. Berg3-169/+304
Change-Id: I380087889cda079a56c8cea3acc13145dcd49046 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-06-08Fix for not reaping 'ssh_network'Peter Barabas1-1/+1
Change-Id: Ib225701a808211e50554c8f1762325aa75ecc33f Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-06Merge "Build odl plugin for mitaka"Michal Skalski4-88/+280
2016-06-02Build odl plugin for mitakaMichal Skalski4-88/+280
Change-Id: I59b96a424a753f880b4ac16abd806851ad3f9533 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-06-02Download deployment config after modificationPeter Barabas1-0/+6
Modified network or interface configurations were not reflected in the deployment config, resulting in faulty node configurations. Change-Id: I4ca20702c0171e7995f2b4f46317557ec9d5beac Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-01Auto deploy corrections for Fuel 9.0Stefan K. Berg3-2/+3
- The auto deployer's detection of nodes being up corrected as "fuel node" now returns "1" instead of "True" to denote that the node is up. - The location of bootstrap_admin_node.sh has changed so the detection of whether the Fuel node installation needed a correction for the deployer not to throw an exit code and terminate prematurely. - Small fix: deploy.py is now executable (just a chmod change). Change-Id: I8fed7bafe6912f8b4278619bbdaa16577a82737b Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-06-01Clean up after ourselvesPeter Barabas1-0/+2
Change-Id: Id7579ef618b8cd922de325d9dc1c0b7a6c5587a7 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-05-31A small edit for the uplift to Mitaka from LibertyDaiel Smith1-1/+1
Signed-off-by: Daiel Smith <daniel.smith@ericsson.com> JIRA:0
2016-05-31common.py: catch stderr in exec_cmdJosep Puigdemont1-6/+6
When running commands with exec_cmd(), the stderr of the command is sent to /dev/null and ignored, and only stdout is retrieved. Thus, when a command fails and check is enabled, only the output of stdout is presented to the user, which normally holds no information about the error. In this patch we retrieve stderr, and when an error occurs, an exception is raised with that message. Fixes https://jira.opnfv.org/browse/FUEL-142 Change-Id: I3940e1a43963a6abec362481b1d4ce7bd7cb816d Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-05-31Merge "Build system uplift to Fuel 9.0/Mitaka"Stefan K. Berg2-3/+2
2016-05-30Merge "Remove residual Lab & configuration DEA and DHA from the unprotected ↵Jonas Bjurel28-9381/+0
Fuel repo"
2016-05-30Build system uplift to Fuel 9.0/MitakaStefan K. Berg2-3/+2
Switching to Fuel 9.0/Mitaka for the build system. Overhaul of the patching mechanism. As bootstrap_admin_node.sh has been transitioned into an RPM (fuel-support), the lazy designer found it more simple to patch that script during the Fuel build phase than at the OPNFV ISO generation. The patch mechanism has been changed to a normal context diff instead of the orig/modified file tuples previously used. Hopefully this will require fewer manual rebases (may the fuzz be with us!). Also the ks.cfg patching has transitioned to a context based ordinary patch for the same reasons, but this is as before taking place during OPNFV ISO generation. Patch naming made more descriptive. The reaping mechanism has been slightly modified due to a change in the naming of the node files when these are generated by the Fuel CLI. IMPORTANT 1: The package cache mechanism is currently disabled, it is only possible to install Fuel with a direct internet connection. This will be fixed in a later change set! IMPORTANT 2: All plugins has been disabled! As you have re-certified your plugin with Fuel 9.0, please re-enable it in build/Makefile! Change-Id: Ia918d16a74b68f89d178e06befe6e8a7a9367bf9 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-05-20More rigorous Fuel environment checkPeter Barabas1-2/+4
get_env() used to raise an unhandled exception when reap.py was run on a Fuel node which didn't yet have an environment set up. Change-Id: I07c37db2d80e416d26fa4fb4907f4e438f1c44e5 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-05-12Remove residual Lab & configuration DEA and DHA from the unprotected Fuel repoJonas Bjurel28-9381/+0
This needs testing!!!! On a follow-up release, this also needs rebasement, the libvirt templates are still in here - they shouldnt, sinse we dont want Lab specific configs in the Fuel repo. NOT VERIFIED DO NOT MERGE Change-Id: I069ced81b886405463f27f37a6ec78e3748b37b7 Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>
2016-05-11Merge "deployment.py: stdout not consumed when deploying changes"Jonas Bjurel1-3/+9
2016-05-10Merge "Reflect new deploy.py options in README"Daniel Smith1-17/+26
2016-05-10Merge "Use US keyboard layout on the console"Daniel Smith14-15/+15
2016-05-09Merge "Fix handling of relative ISO path on the CLI"Stefan Berg1-3/+4
2016-05-09Use US keyboard layout on the consolePeter Barabas14-15/+15
Change-Id: I40942c7181daf5efd1640a03471e91df82548073 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-05-06Reflect new deploy.py options in READMEPeter Barabas1-17/+26
Change-Id: Id22ae685f324b58d07bd0c5256f3dbf55672776e Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-05-03deployment.py: stdout not consumed when deploying changesJosep Puigdemont1-3/+9
During the automatic deployment, when the environment is ready to be deployed, the deploy.py script will spawn a shell process that will perform the command "fuel deploy-changes". The standard output of this process is then piped to a "tee" process, which redirects the output to the standard output of the shell process, and to a file named cloud.log. The file is monitored by the deploy script to find out the status of the deployment, and print it to the log file of the automatic deployment script, including percentages for each node being provisioned. However, the deploy script never consumes the standard output of the shell process. If the shell process produces enough output, its standard output buffer will fill up, thus making the tee process block trying to write to its standard output, and the cloud.log file will not be updated. At this point, the deploy process, which is monitoring cloud.log, will not detect any progress in the deployment, and eventually it will time out and assume the deployment failed, although it might have finished fine after that. The solution here is to remove the "tee" process from the shell command, and instead redirect standard output to the cloud.log file. Another solution would be to actually parse the standard output of the shell command from the deploy script itself, but that would require a bit more work, as reading a line at a time might block the script. Finally, with this patch the cloud.log file won't be deleted unless the shell process has already finished. Change-Id: I03a77be42d220b1606e48fc4ca35e22d73a6e583 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-04-29Merge "Add a dha adapter python file for ZTE hardware."Jonas Bjurel3-1/+53