summaryrefslogtreecommitdiffstats
path: root/deploy/dha_adapters
AgeCommit message (Collapse)AuthorFilesLines
2016-11-03[virtual envs] Switch to raw imagescolorado.2.0Michael Polenchuk1-1/+1
* use raw devices instead of qcow2 * disable i/o caching, it reduces data copies and bus traffic * set native aio instead of thread based JIRA: FUEL-201 Change-Id: I8ac728cbb5be5948080fab8ae4d3d311e0a5c09c Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com> (cherry picked from commit ed79331c115eac4aad0eccd4b191c9e1e836c73d)
2016-09-13update node_reset() in zte_adapter.pywu.zhihui1-23/+5
Change-Id: I71790b8abb25936045f777a78ed903f3b8ce4303 Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn> (cherry picked from commit 161dd445f06aa9a5dfcd273d89a00d1f02260ba3)
2016-06-20Override parameter attempts in Class Zte_Adapter.wu.zhihui1-2/+2
Give more attempts for zte hardware. Change-Id: I0906b6fe9e046ddd6436e5246494b89c812a40a2 Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
2016-06-16Merge "ipmi_adapter: add delay to stabilize command action"Jonas Bjurel1-0/+1
2016-06-16ipmi_adapter: add delay to stabilize command actionJosep Puigdemont1-0/+1
We should allow the nodes some time to stabilize after sending a command to them. Currently we are checking the status too fast. Change-Id: I26a60d2bb6a43edbec842b727f825057e2778981 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-16Merge "Mask ipmitool credentials"Jonas Bjurel1-3/+4
2016-06-16Mask impitool credentialsPeter Barabas1-7/+15
Change-Id: I0103082672259eaf4b1c2be8ca3a1236fc6137eb Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-16Mask ipmitool credentialsPeter Barabas1-3/+4
Change-Id: I328432e6b30437e8a83065859cd80358d4c3c468 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-15virtual_fuel: initial support for remote libvirtJosep Puigdemont1-0/+31
With this patch it should be possible to create a fuel VM on a remote libvirt server by properly defining the LIBVIRT_DEFAULT_URI [1] environment variable. If the variable is not defined, then there should be no percievable change in behaviour for the script. This patch introduces the ability to create volumes (images) on a remote libvirt host where the Fuel VM is to be deployed. For now the volumes are created by default in a pool named jenkins, but the idea is to allow this to be configured, probably in the POD's DHA file. Since all virsh commands honor LIBVIRT_DEFAULT_URI, we use this environment variable to detect wheter we should create a volume or not. The rationale being that the variable will only be set if the user wants to to do the VM deployment on a remote libvirt host. We need to create a volume because we can not rely on being able to access the remote server's file system directly. The images are then transferred to the libvirt host using virsh commands. All this could also be done using scp and a user directory on the host machine, but using pools allows us to take advantage of libvirt's policies and file permissions. CHANGE: when LIBVIRT_DEFAULT_URI is defined, the script will not check for the presence of the required PXE bridge. This will still be checked when the Fuel VM is started and the bridge not found, but this happens at a later point than it does today. CHANGE: before this patch, the file system image was named like the VM: vm_name.raw. This patch introduces a change and adds a timestamp suffix to the image: vm_name-timestamp.raw. This is so to avoid collisions with an image with the same name on the remote pool (two PODs may be using the same pool). It may also be useful to keep around old file system images. FIXME: This patch requires a pool named "jenkins" in the remote libvirt server, and it will fail if it is not present. This should be configurable. Notice though that we can still define LIBVIRT_DEFAULT_URI as "qemu:///system" to create the Fuel VM on the local host. [1] https://libvirt.org/remote.html#Remote_URI_reference Change-Id: I40925ed31337d3ad9cf505f284f5c3d14e9129a0 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15ipmi_adapter: simplify, retry if command failsJosep Puigdemont1-59/+42
The method get_node_state has been added to the the IpmiAdapter class. In addition, now the power on/off methods will try several times to perform their IPMI command before giving up, instead of bailing out at the first error. After the power on/off command is completed, the method will wait until the node is in the desired state. NOTE: a command could potentially take several minutes if the defaults are used; each IPMI command can take up to 1 minute, and there can be 3 commands issued per operation, one of them may be retried 20 times with the current defaults. Ideally we would use eventlet or something similar to allow each command a limited time to execute, instead: with eventlet.timeout.Timeout(seconds) as t: power_on/off_command Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-06-15deploy: ipmi adapter: Add <port> config support.Alexandru Avadanii2-3/+6
Sometimes the IPMI lanplus protocol listens on a non-standard remote port, e.g. when target nodes are interfaced through a fake IPMI BMC application that listens on multiple ports on the same IP address. Therefore, allow setting IPMI port in the DHA using a new property named `ipmiPort`, and pass it along to `ipmitool` when set. CHANGE: get_access_info now also supports specifying the IPMI port to use with `ipmitool` by configuring the `ipmiPort` property in the DHA. hp_adapter.py: updated `get_access_info` return signature with the new (unused there) `ipmiport`. Change-Id: I620176bd7f466aa460518cf12d15ccbe86a22560 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-06-13Revert "Temporary fix for PXE booting from the wrong NIC"Stefan Berg1-1/+1
This reverts commit 5926bcddca0eca28a33ae43aadf90b9263ae6b84. Change-Id: Ibea4ca5d38ce2e10ab6d5bb1d7ccdf666ee149d5 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-06-13Temporary fix for PXE booting from the wrong NICPeter Barabas1-1/+1
Change-Id: I1f6d38da24d5a4e66061b9bdfe576fbbda7fb624 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-04-28Add a dha adapter python file for ZTE hardware.wu.zhihui1-0/+49
ZTE hardware need use IPMI command "chassis power cycle" on function node_reset(). JIRA: FUEL-127 Change-Id: I286fd9cda43d2e1799b134f0a391f57d08cd1928 Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
2016-03-18Configure the infra VMs over DHANikolas Hermanns1-4/+4
This commit enables the full configuration of the VM(fuel/controller/compute) defintion through the dha file. Change-Id: I4e78334d1e5aec1e98667343390283587f0b3ea5
2016-03-09Make number of cpus configurable in dha fileNikolas Hermanns1-0/+5
Some compones of openstack produce a lot of CPU load. With this commit it is possible to make more use of the Hypervisor where the virtual nodes runs on. Change-Id: Ide567dd0823c5526171c29073f2a36aa5f27d4b6
2016-03-01Changing raw to qcow2 for vFuel/Controller/ComputeNikolas Hermanns1-2/+5
A lot of diskspace is allocated although never used this commit changes to thin provisioning for the virtual enviroment. Change-Id: Ia128143a3bae9f3d85a9e749319c2f5343c1df4e
2015-12-08Refactor temporary directory creationPeter Barabas1-1/+2
Use Python's tempfile instead of forking a shell for mktemp. Change-Id: Icba442ea08d4098d67fb51575da16e85d4363beb Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2015-11-27Restructcture of the directory layoutJonas Bjurel6-0/+462
Restructure of the directory layout due to move of Fuel into it's own repo JIRA: FUEL-85 Change-Id: I3647e1992a508f29dce06a5d6c790725c527f6f5 Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>