aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-09-25Run packages upgrade on openstack nodes onlyMichael Polenchuk2-4/+3
Change-Id: I53ac0be519df1bb39a6a56e236285fce95228bd4 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-23Merge "MaaS: Reduce C/D timeouts, minor fixes"Alexandru Avadanii4-3/+50
2017-09-23MaaS: Reduce C/D timeouts, minor fixesAlexandru Avadanii4-3/+50
- add new patch for maas.region, extending it poorly with a timeout override mechanism; the new comissioning/deploying timeout defaults (10/15min) will be used instead of MaaS defaults (20/40min), unless reclass params are defined with different values; - add 30s delay between 'machine mark-broken' and 'machine mark-fixed' MaaS cli commands (fixes a rare race condition); - fix forgotten replace in 'maas.pxe_route': s/opnfv_fuel_/opnfv_/g; Change-Id: I71c562b80031bac2793dd470d52928c2d62e5300 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-23Workaround VCP minions timeout post pkg.upgradeAlexandru Avadanii1-2/+4
pkg.upgrade was enabled for all salt minions, including VCP VMs, which take longer to perform the operation, probably due to an older set of packages in the Ubuntu disk image we use. One way to work around this is to switch to UCA Xenial image, and let Salt pre-provising salt minion on it, but that adds deploy time delay and has caused issues in the past (should be ok now). Alternatively, we can retry the pkg.upgrade until all minions respond, before moving on with the state execution. This prevents silently skipping the next salt calls (e.g. installing keepalived). Note that the issue did not manifest for OVD-DPDK, where after pkg.upgrade, DPDK is installed, giving VCP VMs enough time to return. While at it, retry 'salt.control' state apply too (non-critical, but it fails every once in a while). Fixes: 87310fb Change-Id: I97acc2b23206a55d72f7e6583ca42127fdbacc16 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-23reclass: Drop MaaS public IP and interfaceAlexandru Avadanii8-34/+2
MaaS node does not need to be exposed to the public network; instead the management IP should be enough to access the MaaS dashboard. So, drop 'infra_maas_node01_external_address' reclass param, together with its OPNFV PDF param, 'opnfv_infra_maas_node01_external_address'. This allows us to move compute public IPs back to .{2,3} instead of .{101,102}, where we moved them during 'pod_config.yml' addition. While at it, fix a minor duplicate 'name' param for 'br-mgmt' bridge on kvm nodes. Change-Id: Ie9fcf5924d7aa37b666f42c968687d73b51a8278 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-23reclass: pod_config: Revert MaaS IPs to .3Alexandru Avadanii1-3/+3
PDF compatible reclass support moved the MaaS IPs from .2 to .3. However, the runtime template was not updated accordingly, leading to mismatches between IP addresses. Until all scenarios support pod_config, we can't apply the IP change correctly, so revert it. Change-Id: I34e42ec06dd9fd4f69bd7c91dbe068a4f83b3e62 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-22states: maas: Add 30s delay in re-deploy attemptAlexandru Avadanii1-0/+2
Occasionaly, MaaS fails to provision/deploy some nodes, in which case we try marking them as broken, then fixed (to put them again in 'ready' state); before re-attempting the MaaS deploy operation. However, this leads to 'Error: Internal server error' when deploy function is called right after transitioning the node to 'ready' state. Add a delay of 30 seconds before re-attempting the failed operation. Change-Id: Ia9ecec67639387e4a29feab3114e1741c554a2cb Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-22Merge "Adjust memory allocation size"Alexandru Avadanii12-9/+42
2017-09-22Adjust memory allocation sizeMichael Polenchuk12-9/+42
* [baremetal] add memory to contollers & salt master * tune up sysctl vm.dirty* for compute nodes * upgrade packages to get the latest versions (https://bugs.launchpad.net/cinder/+bug/1641312) Change-Id: I9ad22206f2f3f11e1da3f93c7a0931c592adf1cf Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-21Pod Descriptor File compatible reclass structureGuillermo Herrero13-114/+206
Implementation for baremetal-mcp-ocata-ovs-ha scenario JIRA: FUEL-275 Change-Id: Id6ab5697f993ac9faa019c3c10ba4ed4b7b6db01 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2017-09-21[virtual] Alter haproxy entry type of odl rest apiMichael Polenchuk1-3/+3
Change-Id: Iedb9a57f7ed4b7483bf629225fb2f3470e7de97e Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-15Remove build instruction from documentationCristina Pauna2-309/+0
Fuel/MCP no longer packages the installer in an iso, therefore these building instructions are obsolete. JIRA: FUEL-276 Change-Id: Iee587be89078707cf0cf748212b94d69f1769e12 Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
2017-09-15[ovs/dpdk] Fix location of libvirtd configMichael Polenchuk2-0/+2
Change-Id: If2e3736af02bb0ca53667116377f2fed4385b048 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-14Merge "Tune up mysql options"Alexandru Avadanii4-0/+13
2017-09-14[baremetal] Switch from 1Gb to 2Mb hugepagesMichael Polenchuk1-3/+3
Employ 2Mb hugepages for physical computes as well since functest suite uses less than 1Gb memory flavors. Change-Id: I7e96dd73df7d9e7274247b4faba15ee9bd362e40 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-14Tune up mysql optionsMichael Polenchuk4-0/+13
Change-Id: Ib4d787c45434243d0dc29d517a73224cf4f9d1c1 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-13Merge "[virtual] Setup nfs for nova instances"Alexandru Avadanii4-1/+27
2017-09-13Merge "[virtual] Add haproxy entries for opendaylight"Alexandru Avadanii1-0/+25
2017-09-13[baremetal] Setup glusterfs for nova instancesMichael Polenchuk7-1/+79
Live-migration feature requires shared storage on compute nodes, so configure glusterfs volume for nova instances. Change-Id: Id6b9b5aad89f5b4aefbef71e4ba7247a441873b0 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-13[virtual] Add haproxy entries for opendaylightMichael Polenchuk1-0/+25
Change-Id: Id0303d217dbe71e4b04834e545feae0660172b23 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-13[virtual] Setup nfs for nova instancesMichael Polenchuk4-1/+27
Configure nfs shared storage for nova instances to support live migration feature. Change-Id: I777d5725e45d03325507d3ecc8dd59a28cbc188f Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-12Merge "salt-master-init.sh: Use stable 2016.11 salt ver"Alexandru Avadanii2-6/+4
2017-09-12Add proxy entries for opendaylight endpointsMichael Polenchuk1-0/+27
Change-Id: I8ebe4dedb9601ae0f45922fd30a34c67382755fc Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-12reclass, states: Parametrize runtime configurationAlexandru Avadanii18-32/+73
mcpcontrol virsh network, as well as MaaS PXE network are installer specific, and not POD specific. Therefore, these should be easily parametrized without the PDF, using only installer inputs (e.g. env vars passed via Jenkins). - add new <all-mcp-ocata-common.opnfv.runtime> reclass class; - parametrize at runtime new reclass class based on global vars; - factor out MaaS deploy address / config using new mechanism; - parametrize at runtime virsh network definitions based on template; - add new "maas.pxe_route" sls for configuring routing on cfg01; - replace env vars with the new sls in "maas" state; NOTE: baremetal parametrization will be handled later. Change-Id: Ifd61143d818fb088b3f4395388ba769bbc49156e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-12salt-master-init.sh: Use stable 2016.11 salt verAlexandru Avadanii2-6/+4
The <salt-master-init.sh> script default to using stable 2016.3 version of Salt via BOOTSTRAP_SALTSTACK_OPTS. However, since we manually add the 2016.11 repos beforehand, the correct version (2016.11) ends up being installed. This change merely drops one uselss repo from salt master apt sources. While at it, use HTTPS for repo.saltstack.com DEB repository. Since we already add the repo to apt sources via <user-data.sh>, pass "-r" on all architectures, skipping repo (re)addition. Change-Id: I7fbe0b646b2f2a8e952718a61ff8c180116f8f27 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11salt master, maas: Move mcpcontrol to 10.20.0.0/24Alexandru Avadanii8-10/+11
Use INSTALLER_IP Jenkins param instead of SALT_MASTER_IP, allowing us to drop SALT_MASTER_IP completely from releng. mcpcontrol IP changes: - 192.168.10.100 becomes 10.20.0.2 (align with legacy Fuel master); - 192.168.10.3 becomes 10.20.0.3 (baremetal MaaS address); JIRA: FUEL-285 Change-Id: I6e2d44c3a8b43846196bd64191735214167a76ce Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11Merge changes from topic 'multiarch-image-defaults'Alexandru Avadanii20-17/+79
* changes: reclass: virtual: Factor out VM interface naming reclass: Multiarch support for arch specific param
2017-09-11reclass: virtual: Factor out VM interface namingAlexandru Avadanii8-14/+40
Define two groups of VM interface naming: - ens3..ens6 - used by infra VMs, virtual node VMs; - ens2..ens3 - used by VCP VMs (spawned by salt.control); Parametrize newly defined interface names throughout the cluster models. While at it, add AArch64 default values for above iface names. NOTE: baremetal clusters will be parametrized later, after common config is factored out into <baremetal-mcp-ocata-common>. Change-Id: I89aba9aaf85b585cc510302eb76d7810fbf60679 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11reclass: Multiarch support for arch specific paramAlexandru Avadanii14-3/+39
Introduce a simple mechanism that simulates an 'if-arch-then' cond for reclass models: - add new <all-mcp-ocata-common> class hierarchy; - at runtime (via <salt.sh>) make 'all-mcp-ocata-common.arch' point to 'all-mcp-ocata-common.$(uname -i)' dynamically; - inherit new 'arch' class in all cluster models; - factor out current x86_64 default for "salt_control_xenial_image"; - add AArch64 default for param "salt_control_xenial_image"; Change-Id: I3b239b28d0fd1cc2ced8579e2e93b764eb71ffc3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11README files: Convert from markdown to RSTAlexandru Avadanii4-98/+158
Change-Id: I176f583e8adb7ba717932de7c27283f696ded548 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-11Merge "Add & fix licensing in README.rst files, align ext"Alexandru Avadanii6-35/+20
2017-09-11Merge "os_cacert: Parametrize VIP used in path by cp.push"Michael Polenchuk1-1/+4
2017-09-11Merge "scenario: Add AArch64 defaults"Michael Polenchuk3-6/+13
2017-09-11Merge "reclass: virtual: Factor out common infra config"Michael Polenchuk10-200/+64
2017-09-11Merge "log.sh: Collect /var/log from cluster nodes"Michael Polenchuk7-7/+50
2017-09-11Add & fix licensing in README.rst files, align extAlexandru Avadanii6-35/+20
Rename all variations of README files to README.rst. Fix license headers according to OPNFV Contribution Guidelines [1]. Markdown syntax will be switched to rst in an ulterior change. [1] https://wiki.opnfv.org/display/DEV/Contribution+Guidelines Change-Id: I2c71fd62b38f218545507c79c39e07dbd35f7c88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-10os_cacert: Parametrize VIP used in path by cp.pushAlexandru Avadanii1-1/+4
JIRA: FUEL-274 Change-Id: Ia77948ba3e99c47aa86fcca20c67d80e2e761208 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-10scenario: Add AArch64 defaultsAlexandru Avadanii3-6/+13
Move scenario defaults.yml out of virtual/baremetal dirs, unifying them into a single, arch-specific defaults configuration file. Add AArch64 equivalent config, and arch-qualify default filename. For AArch64, bump VCPU number from 2 to 6. Change-Id: If9b39850af96e4c46e868b1d532bd301f9fd9f26 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-09reclass: virtual: Factor out common infra configAlexandru Avadanii10-200/+64
Change-Id: I669a81cf46a4ac988a1ea04c3b9d297ae67a0a62 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-09log.sh: Collect /var/log from cluster nodesAlexandru Avadanii7-7/+50
Bring back <ci/deploy.sh> parameter `-L`, which is already passed by releng deploy script. Since we need to enable file_recv on salt master, do so by adding a new class in <virtual-mcp-ocata-common/infra/config.yml>, which will be inherited by all scenario reclass models. JIRA: FUEL-288 Change-Id: I9b649315984fb8580b63883d0e06c1e1efd11057 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-08bash scripts: Fix remaining shellcheck warn/errsAlexandru Avadanii5-6/+11
Fix/silence all shellcheck errors, except for scripts in <prototypes/sfc_tacker>. Change-Id: Idc317cdba0f69b78299f2d3665e72ffc19dd8af5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-08Merge "Move mcp.rsa to /var/lib/opnfv"Alexandru Avadanii2-6/+3
2017-09-08Merge "lib.sh: Remove all storage on undefine"Alexandru Avadanii1-1/+4
2017-09-08[ovs/dpdk] Mend dpdk settingsMichael Polenchuk7-6/+40
* add vcpus to virtual compute * re-pin dpdk core & pmds * switch to UCA repos * disable apt-daily cron job Change-Id: Ia23100b846d8954e3d5e8a264a6b8518402b2fa6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-08lib.sh: Remove all storage on undefineAlexandru Avadanii1-1/+4
While executing the deploy script via sudo will raise no issues with re-using old storage volume files, non-root deploys fail to change ownership of said files. Properly clean after ourselves when destroying and undefining VMs. JIRA: ARMBAND-311 Change-Id: I7fdd269dccbfd5ab5285d852ac7dacfc4dc5ccd7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-07Move mcp.rsa to /var/lib/opnfvAlexandru Avadanii2-6/+3
JIRA: FUEL-280 Change-Id: I1e07b0e1597b2a1e4a92e1274f89dda62cb81bb8 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-09-07Merge "cleanup: Rename ODL-L3 to ODL, drop ODL-L2"Alexandru Avadanii12-226/+3
2017-09-07Merge "Initialize mongodb cluster"Alexandru Avadanii1-1/+5
2017-09-06Initialize mongodb clusterMichael Polenchuk1-1/+5
* wait for mongodb service ready state * run rs.initiate() to start a replication set Change-Id: Ia9d2357d2ce0e9ba92a6be3d8b6c068efaa10822 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-09-06Configure SubjectAltName for the proxy certMichael Polenchuk3-0/+18
In order to avoid SubjectAltName warnings, bring it into proxy ssl certificate. Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com> Change-Id: I46fe9697469354bc028039cc1f030baae1ccd7fb