aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-08-19Merge "MaaS: Disable network discovery"Alexandru Avadanii1-1/+1
2017-08-19maas state: Add debug output to grep query loopsAlexandru Avadanii1-3/+3
Change-Id: Ic47a9dd2d5a4cccc9c4330509d81aba82f777084 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-19MaaS: Disable network discoveryAlexandru Avadanii1-1/+1
In case nodes are already powered on and have an IP in the same range as the new MaaS DHCP one (e.g. from a previous deploy), MaaS API will reject the subnet creation due to overlapping addresses. Try to work around this by disabling network discovery. Change-Id: I70a33c552bf38a7ccbc1bb7e90c21f424f082bc5 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18Merge "MaaS: DHCP iprange fix: use dynamic, not reserved"Alexandru Avadanii1-0/+1
2017-08-18MaaS: DHCP iprange fix: use dynamic, not reservedAlexandru Avadanii1-0/+1
Without the 'type' parameter set to 'dynamic', MaaS was configured to reserve the IP range instead of allocating it dynamically. This led to IP exhaustion warnings in MaaS dashboard, as well as wrongful IP allocation. Change-Id: I1f2b90bf4cd2393cfab6d4bc17771cef009701c0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18maas.region: Add port to all MaaS API URLsAlexandru Avadanii3-3/+3
Change-Id: I6ecc81cc6faf45f33882666b9f537a3e42ad379e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18maas.region: Add missing port to maas_urlAlexandru Avadanii1-1/+1
Change-Id: Iae9991f9148ac518696f9f8b57b5a8ca9dded730 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18linux.network: Fix noifupdown in linux/map.jinjaAlexandru Avadanii2-3/+4
Previous changes attempted to add 'noifupdown' support, but failed to spell it correctly. Fix the typo and also edit the 'maas' state to use simple `salt state.apply` instead of `cmd.run 'salt-call'`. Change-Id: If9889dee896fa100febe0372fe2c4173fc223ee3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18MaaS node: Fix dhcp_interface configAlexandru Avadanii1-1/+5
Explicitly configure dhcp_interface for mas01, in order to allow the interface name to be parametrized via "dhcp_interface" _param. Change-Id: I6a2750adc1941c0aa1f94ac9b39133b5bd2388c6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-18Apply network config on kvm nodesMichael Polenchuk3-5/+6
* re-assign ip from interface to bridge - install bridge utils - make a reboot straight away after network config * change image source for vcp Change-Id: I34506ee161337b5d3a4088cfdf3c082d99ccb695 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-18Merge "patches: linux.system.single fixed upstream"Michael Polenchuk1-26/+0
2017-08-18ci/deploy.sh: yum install --skip-brokenAlexandru Avadanii1-2/+2
Change-Id: I8098eff73ab15fe58cb357db99df76e1bd160652 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-17patches: linux.system.single fixed upstreamAlexandru Avadanii1-26/+0
Fixed upstream in [1], drop our patch. [1] https://github.com/Mirantis/reclass-system-salt-model/commit/573be77 Change-Id: Ieeb9b87cac0418d860bbf04e5e8ffd48898a213e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-17Merge "Bring in baremetal support"Alexandru Avadanii34-30/+1612
2017-08-17lib.sh: Fix mcp key owner for OPNFV Jenkins jobsAlexandru Avadanii1-1/+4
In case of non-root deploys (i.e. running `ci/deploy.sh` without sudo), the OPNFV Jenkins slave executes it under a user shell, under a root shell, e.g.: $ sudo sudo -u jenkins bash $ echo $USER jenkins $ echo $SUDO_USER root Adjust lib.sh to only use SUDO_USER when it is not "root". Change-Id: I6dd1c8a5dd3a3b02cfb760818d66e99f49709a5b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-17Bring in baremetal supportAlexandru Avadanii34-30/+1612
- ci/deploy.sh: fail if default scenario file is missing; - start by copying reclass/classes/cluster/virtual-mcp-ocata-ovs as classes/cluster/baremetal-mcp-ocata-ovs; - add new state (maas) that will handle MaaS configuration; - Split PXE network in two for baremetal: * rename old "pxe" virtual network to "mcpcontrol", make it non-configurable and identical for baremetal/virtual deploys; * new "pxebr" bridge is dedicated for MaaS fabric network, which comes with its own DHCP, TFTP etc.; - Drop hardcoded PXE gateway & static IP for MaaS node, since "mcpcontrol" remains a NAT-ed virtual network, with its own DHCP; - Keep internet access available on first interfaces for cfg01/mas01; - Align MaaS IP addrs (all x.y.z.3), add public IP for easy debug via MaaS dashboard; - Add static IP in new network segment (192.168.11.3/24) on MaaS node's PXE interface; - Set MaaS PXE interface MTU 1500 (weird network errors with jumbo); - MaaS node: Add NAT iptables traffic forward from "mcpcontrol" to "pxebr" interfaces; - MaaS: Add harcoded lf-pod2 machine info (fixed identation in v6); - Switch our targeted scenario to HA; * scenario: s/os-nosdn-nofeature-noha/os-nosdn-nofeature-ha/ - maas region: Use mcp.rsa.pub from ~ubuntu/.ssh/authorized_keys; - add route for 192.168.11.0/24 via mas01 on cfg01; - fix race condition on kvm nodes network setup: * add "noifupdown" support in salt formula for linux.network; * keep primary eth/br-mgmt unconfigured till reboot; TODO: - Read all this info from PDF (Pod Descriptor File) later; - investigate leftover references to eno2, eth3; - add public network interfaces config, IPs; - improve wait conditions for MaaS commision/deploy; - report upstream breakage in system.single; Change-Id: Ie8dd584b140991d2bd992acdfe47f5644bf51409 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com> Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com> Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com> Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-11Merge "maas: region: credentials workaround, force sync"Alexandru Avadanii4-1/+72
2017-08-11Merge "lib.sh: AArch64: Use VGA video mode for guests"Alexandru Avadanii2-1/+15
2017-08-11lib.sh: AArch64: Use VGA video mode for guestsAlexandru Avadanii2-1/+15
On AArch64, there is no Cirrus video, so use VGA mode instead. On Debian systems, also fix a missing link for vgabios-stdvga.bin. Based on previous Armband work from [1]. [1] https://github.com/opnfv/armband/blob/danube.2.0/patches/fuel-library/ arm64-bug-fixes/0002-Install-vgabios-and-link-for-aarch64.patch Change-Id: Ia84ea5536b68e14993b719488375b0041183a767 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-11Revert "Switch distrib revision to testing"Michael Polenchuk1-1/+1
There is no much difference between nightly vs testing repos. This reverts commit 052a1626da71d232431b3a9faf576a76db61f10e. Change-Id: I40f60ddc2c9e1e59c7c4eb0be59ae19b00b7fb9b Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-10maas: region: credentials workaround, force syncAlexandru Avadanii4-1/+72
Workaround the issues described in [1], stating that salt-formula-maas package cannot set an autogenerated PostgreSQL password, respectively the known error thrown during initial setup. FIXME: These should be reverted later, after fixing the MaaS password update and initial artifact sync in the salt formula / scripts. [1] https://docs.mirantis.com/mcp/1.0/mcp-deployment-guide/\ install-base-infra/set-up-bare-metal-provisioner/configure-maas-vm.html Change-Id: I8b37f55d3caa4119c64f9549578850dd4eb9e3ad Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-09Synchronize down all of the dynamic modulesMichael Polenchuk2-0/+1
Sync all of the salt dynamic modules to make sure custom modules, states, grains & etc. are on the target nodes. Change-Id: I04f2ac0465d5381c4c07623e9383619d9b9731de Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-08Switch distrib revision to testingMichael Polenchuk2-1/+1
In order to avoid bleeding edge issues with nightly version of salt formulas, switch to "safe" testing repo source. Change-Id: I9d12f337c3952711cb8843943c23315795064016 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-06Merge "ci/deploy.sh: Allow non-root deploys"Alexandru Avadanii1-5/+10
2017-08-03Merge "Set ntp servers list"Michael Polenchuk5-56/+22
2017-08-02Merge "reclass: opendaylight: Use UCA default repos"Alexandru Avadanii1-1/+0
2017-08-02Merge "mcp/config: Move scenario defs to separate dir"Alexandru Avadanii9-3/+29
2017-08-02Set ntp servers listMichael Polenchuk5-56/+22
* set ntp sweden servers list for virtuals * wrap common cluster init options Change-Id: I044802998d5498fed969e62bf1ea8c814652f34f Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-02[odl-router] Bring up public network on computesMichael Polenchuk1-0/+28
* apply provider mappings on compute nodes as well * set default route of computes to gateway node Change-Id: I5715e34fd8ecbed87bd7f1b1ed488766af711bae Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-08-01mcp/config: Move scenario defs to separate dirAlexandru Avadanii9-3/+29
Prepare for adding baremetal scenarios by moving existing scenario definitions (intended for deploys on virtual PODs) to their own subdirectory. Change-Id: Iaa75e0b0a9876e4f263fc6bbae796d97848ef99b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-01ci/deploy.sh: Allow non-root deploysAlexandru Avadanii1-5/+10
Currently, deploying Fuel@OPNFV requires the `ci/deploy.sh` to be ran as root user, for: - hypervisor access (virsh); - installing prerequisite packages; We can support non-root deploys if we relax above restriction into: - current user should have hypervisor access beforehand (new check added); - current user has passwordless sudo rights, for installing packages; Later, we should move the package installation out of the deploy script (`ci/deploy.sh`), making the whole deploy possible without sudo, only hypervisor access. After this change, the old way (sudo ci/deploy.sh) should work just like it used to before, so no regression/behavior change should be introduced with this. Change-Id: Ib2ea96aa7b6d67ba0606318407a8adeb51e6969d Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-01reclass: opendaylight: Use UCA default reposAlexandru Avadanii1-1/+0
Current opendaylight pillar enforces a full apt repository cleanup, removing Ubuntu Cloud Archive (UCA) repos in favor of adding pre-hardcoded Ubuntu archive repos. Unlike UCA, main Ubuntu archive is split based on target arch, the main archive.ubuntu.com holding only x86 packages, while the other archs are hosted on ports.ubuntu.com. This leads to adding (only) x86-specific repositories to our AArch64 UCA image. Mitigate this by ommiting "system.linux.system.repo.ubuntu" from the opendaylight pillar, leaving the default UCA repos in place. Change-Id: Ia7033bcb544d8752d5557bbabc92c92c5008b00c Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-01ci/deploy.sh: Fix "notify" on dumb terminalsAlexandru Avadanii1-1/+1
Dumb terminals (which do not support colors), like "vt220", make `tput setaf` return with an error code, hence bypassing the actual print. Change-Id: Id838583beb30a810aec478ed80d452c6f3203e0f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-08-01salt.sh: Drop upstream clone in favor of local gitAlexandru Avadanii15-636/+92
salt.sh currently clones the full Fuel@OPNFV git repo from upstream public mirror, preventing us from testing locally edited or new patches. Instead, bring back git submodule handling from old f_repos, clone and patch each submodule locally, then copy the whole parent repo over to cfg01. This is also a first step towards implementing offline deploy support. NOTE: This adds new deploy prerequisite packages: - git (for submodule clone/update); - make (for submodule patching); - rsync (for parent repo replication to cfg01); NOTE: Parent repository is expected to be a git repo, in order to work with git submodules. While at it, perform some minor related changes: - add deploy artifacts (ISOs, qcow2 files) to .gitignore, also used to filter-out such files during rsync to cfg01; - remove obsolete Fuel patches (old f_repos mechanism); - rename "reclass-system-salt-model" submodule; Change-Id: I6210d80d41010b2802e4f1b31acf249a18db7963 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-31mcp/scripts: shellcheck cleanupAlexandru Avadanii4-39/+46
Change-Id: I280d540b461341e14de654186016248eba4d3521 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-31ci/deploy.sh: MCP cleanup, sanity checksAlexandru Avadanii1-112/+118
- disable false-positive shellcheck errors; - fix obsolete backtick usage; - move obsolete arguments to separate section; - add color-enabled "notify" macro for warn/err messages; - remove obsolete code intended for old Fuel; - fix quoting and double-quoting shellcheck warnings; - minor code changes for better readability; - remove "no healthcheck" flag (obsolete); - add mandantory arguments validation; Change-Id: I991836adc8d76466f2b83b1e472bb9ef6989fff3 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-31ci/deploy.sh: Rework bridge arguments for MCPAlexandru Avadanii2-30/+60
Change-Id: I20d6dedeaa31f7986eaa35be49c5388c3fdb4b83 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-31lib.sh: Use host-passthrough when spawning VMsAlexandru Avadanii1-1/+3
virsh defaults to using "host-model" instead of "host-passthrough", which not only might lead to a small performance hit on x86, it is also causing compatibility issues with libvirt 3.x. Address this by explicitly requesting "host-passthrough" as the CPU model for virt-install. Change-Id: Ia7c5e8ff906c02fed2193c268cbb3594c5607bc6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-31[odl-router] Add missing nodes configMichael Polenchuk1-0/+10
Change-Id: Id7603aa581e4ccdddad1cf93f9434fe95c047800 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-07-31Set key owner to original user in case of sudoMichael Polenchuk1-1/+3
Change-Id: If964d36ad4f0cb6f1b2caf8544d4e35487f59c6c Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-07-31Bring in opendaylight L3/router scenarioMichael Polenchuk15-16/+658
Change-Id: I8a3be1764de136e2ecf81f964233483be5d6655a Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-07-28mcp/user-data: Pin saltstack repo to 2016.11Alexandru Avadanii1-2/+2
Latest saltstack repository recently pushed a new version of "salt-api" which breaks compatibility with current Fuel@OPNFV code. For now, let's pin saltstack repo to the most recent stable version. Change-Id: I2a7e11d4fb50a8c62220f3f29ded5955fa69aef0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-26lib.sh: cleanup_vms: Also remove VMs that use UEFIAlexandru Avadanii1-2/+4
Pass `--nvram` to `virsh undefine`, so guest VMs booted using UEFI (OVMF on x86 or AAVMF on AArch64) can be destroyed. This does not affect VMs without UEFI. While at it, fix logical error in previous commit adding support for cleaning up stopped VMs. Change-Id: I44c20566469f29a8683d81e3641c69da572ccd4e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-26lib.sh: cleanup_vms: Also remove stopped MCP VMsAlexandru Avadanii1-1/+1
In case the cfg01 & co. VMs are in "shut off" state, `virsh --name` will ommit them, which leads to `cleanup_vms` leaving behind stale VMs. Add `--all` arg to list all VMs, including stopped ones. Change-Id: Ia550a10eb0b40138f87ade709336c2871a8b1cd8 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-19[bugfix]invalid user ‘jenkins’zhihui wu1-1/+1
See https://build.opnfv.org/ci/job/fuel-deploy-zte-pod1-daily-master/456/console In lib.sh, generate_ssh_key() assumes that "jenkins" is the current user name. But on zte-pod1, the ci user name isn't jenkins. It is better to use $USER replaced "jenkins". JIRA:FUEL-273 Change-Id: I6ec6847eccd055b8b4062dd202f8f0a24ba6dd73 Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>
2017-07-18Merge "mcp: openstack: Install & configure horizon"Alexandru Avadanii1-0/+2
2017-07-15mcp: openstack: Install & configure horizonAlexandru Avadanii1-0/+2
Change-Id: I2f6b136efebfee95a9a192c40afb88d20bbacef0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-15mcp: lib.sh: virt-install --noautoconsoleAlexandru Avadanii1-1/+2
When X server is available, virt-install tries opening virt-viewer automatically (for each newly created VM), which blocks the deployment until the user closes the virt-viewer window. Without X, virt-install just throws a warning and moves on. Fix both of the above by passing the "--noautoconsole" argument to virt-install. Change-Id: I7df839aa902f7629dec11d24905fc05d1070f9db Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2017-07-13Tune network sysctl optionsMichael Polenchuk9-10/+33
* tune net/tcp opts * handle vcpus setting for vms * fix tempest issue with public subnets visible * set reclass data source to local to avoid git clone Change-Id: Ibac9eba8234ebb20854c03b399405968cb2069e8 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2017-07-12Apply reclass patches before salt master initMichael Polenchuk7-41/+30
Change-Id: I7bb984880e98b7bdec9aa0b3895a3be9fd75cac0 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>