Age | Commit message (Collapse) | Author | Files | Lines |
|
Maas uses a tftp library during commisioning which in turn uses another
library which tries to find the best packet size to use. For some reason
during commisioning the library uses smaller sizes than the
infrastructure can handle and therefore takes a lot of time to deploy.
JIRA: ARMBAND-351
Change-Id: I9b3083a059c04b118e8b7f0f2723af67d96d2aad
Signed-off-by: Charalampos Kominos <charalampos.kominos@enea.com>
|
|
Replace loop device LVM-backed cinder volume with a dedicated
/dev/vdb drive.
This is another small step towards bringing noHA to baremetal.
Change-Id: I80f9c2bee42e933a36ab7a8f9b4c5247d1652b42
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
On systems with more than 2TB on /dev/sda, MaaS automatically creates
a 1MB partition with bios_grub label as /dev/sda1.
Account for this and expect rootfs to reside on /dev/sda2 (assume
all compute nodes have the same behavior wrt this issue).
Ideally, later we will switch to explicit partitioning via MaaS, or to
a new baremetal provisioner like Ironic.
Requires bumping Pharos git submodule to pick up the new j2 filter.
Fixes: f6f8a56
JIRA: FUEL-330
Change-Id: I12f5046cf69bf2f52c8b8dc331b90048df643646
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
On cmp nodes, we assing 30G (fixed) to rootfs, use the rest for
cinder.
Note: AArch64 gets one extra partition (the EFI System Partition or
ESP) on /dev/sda1 via MaaS.
JIRA: FUEL-330
Change-Id: I2a36107d074532b627bd2349cafc0c8ee61f500f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- add Armband nightly/extra DEB repository;
- install forked and updated reclass 1.5.2 which includes:
* better error reporting;
* support for deleting existing keys during list interpolation;
* various other improvements and optimizations;
While at it, update copyright year for patches.
JIRA: FUEL-345
Change-Id: I00d8b625fe191648e7ea34b3dd4c8375691384e6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Virtual compute nodes goes to kernel panic during nova instances ops
under hwe kernel, so use the default one from xenial image.
Change-Id: Iae100b68208cc1fb9e43e45f385e762cdbd6573a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
All other VCP nodes (mdb, prx, ctl etc.) inherit only the infra
subdir of each scenario, so apply the same to dbs, msg.
This should cut down some operations during reclass interpolation
for affected nodes, without any changes in output pillar data.
Change-Id: I77ae6e1d5658cba87fcd8c45a5f8f5e177e0eda9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: Id1ca66938531e1d24ec0d44194f8b09643062944
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
* changes:
[baremetal] Use upstream lab proxy for keyservers
[MaaS] Override failed testing by default
|
|
|
|
Previous commit used a pattern that is too generic and always matches
the substring 'mcp' vs the node hostname, not only pkg version.
Fixes: 4658acf
Change-Id: Ia4dcbbf7cdfa68574c86459217101d83d61add01
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Proxy chainloading does not always work for keyserver requests, so:
- mv common.infra.lab_proxy_pdf common.include.lab_proxy_pdf;
- mv common.include.proxy common.include.maas_proxy;
- include lab_proxy_pdf after each maas_proxy, so if upstream_proxy
is defined, it will override the MaaS proxy;
JIRA: FUEL-317
Change-Id: I63749be0d350ea73ea2cf6e629710766b14ecb73
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
On cmp nodes, allocate only 30GB (fixed for now) for / partition.
The rest of the disk(s) can later be allocated via salt-formula-linux.
JIRA: FUEL-330
Change-Id: Ie11c78791e60801719cd33475ff91fc003df5ffa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Some nodes fail automatic testing done by MaaS during commissioning,
although running the testing suites one more time manually works.
For now, just override all 'failed testing' nodes unconditionally.
JIRA: FUEL-333
Change-Id: I13d3ee3d82550524480aa53aa8752ab90aa940cd
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Set nova/libvirt disk cache modes to file directsync to bypass the
host page cache & prevent instance's kernel panic due to absent
/dev partition. Caching mode directsync effectively turns all guest
I/O operations into direct I/O operations on the host, which is the
NFS client (virtuals) or GlusterFS (baremetals).
Also return back to hwe kernel as a golden mean between GA & Edge ones.
Change-Id: I51ab7d0ee71c214ff16b756cfee16e918738b6fd
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
Fixes: 86c8109
Change-Id: I0a947bd7db5dd7cb830cc932f5a0d16831551923
Signed-off-by: Delia Popescu <delia.popescu@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
In order to avoid using cache data with initial/outdated
configuration, mask opendaylight service before package
installation.
JIRA: FUEL-344
Change-Id: I71eb0b0a5af93d6d21698e76587b32098aba96b4
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
|
|
Drop one questionable patch responsible for MaaS node authorized
keys to include mcp.rsa.pub by reading the contents of authorized
keys on mas01, assuming mcp.rsa.pub will be on the first line.
Instead, export the contents of the public key using a shell env
var during deploy, which gets expanded via maas_pdf j2 template
into a reclass param, leveraging existing salt-formula-maas sshprefs
mechanism for delivering the key to MaaS.
Since we require the public key to exist before expanding templates,
move `generate_ssh_key` call outside the current infrastructure
handling block, allowing it to execute during all `deploy.sh` calls,
even for dry-runs.
Change-Id: I0f53b0f764a2fafd292e0ffd399c284acf61bd30
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Refactor maas machine definition flow from going through variables
in pod_config.yaml to directly handling it in Fuel using a new j2
template.
This prepares for future improvements allowing a dynamic compute
node count, as well as parameterizing new values via j2.
For now, node roles and count are still statically mapped to PDF
nodes.
JIRA: FUEL-319
Change-Id: I770d82987fcb99792f9d5bc0857ab513f5cd3731
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-342
Change-Id: I35efc993647c63779107d5f5604e58b124cdcf69
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
|
|
|
|
- gcc is required for NBD kernel module build;
- gdisk is required for resizing rootfs in nbd-mounted chroot;
Change-Id: I8863c126b75ce3a15998c03d2d159f53f5006f5d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Fixes: 5f95f52
Change-Id: I53e08a89b2e873829a78ff75c0f3532329ef87a3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Jinja variables set inside loops do not live outside current
iteration, so use a dictionary.update to work around that.
Fixes: 3d2c66e
Change-Id: I2bef64dddab080486a71952465edc4e528ae9e17
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Previous commit replacing explicit loops with `wait_for` failed to
properly escape a nested variable, leading to deploy failure.
Also, the logic was flawed, not breaking for offline nodes, rendering
the whole barrier check useless.
Fixes: 1a0e8e7e
Change-Id: I038dbf90fb53c6b61da2e5c9b6867e31d78867af
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- MaaS requires PXE/admin to be a Linux bridge;
- if virtual nodes are present, they should be hooked to a proper
Linux bridge for the Public network, but only throw a warning if
not (and create a mock public virsh network instead);
- if both virtual and baremetal nodes are present, Public bridge is
indirectly mandatory (we can't mock it);
JIRA: FUEL-339
Change-Id: Idfe99d66c49eadc56cb3d94ca4db3467fb76d388
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
|
|
|
|
|
|
Deactivate documentation related optional state
until it get fixed in upstream.
Change-Id: I5242ed307548c4f37f81d271a1f4f6bee9903f4e
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
|
|
* changes:
[virtual] Add missing ODL dhcp_int
[virsh net] public: rm addr cfg for pure baremetal
|
|
|
|
Upstream commit [1] now handles cloud init interface configuration
cleanup, so drop our explicit config from reclass.
[1] https://github.com/salt-formulas/salt-formula-linux/commit/b333d284
Change-Id: Ifd624f1e884d0d884513a3a7c3e18ffe3f00949a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
JIRA: FUEL-322
Change-Id: I99c4b1774a7c3afbc834a6f6e8468f7baf1bc329
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Instead of classifying scenarios by underlying machine type, switch
to HA/NOHA differentiantion only.
This allows us to add support for hybrid scenarios (with some virtual
and some baremetal nodes in the same cluster).
To facilitate this, we will template the scenario files, which is a
small step towards SDF (Scenario Descriptor File) definition and
adoption later.
JIRA: FUEL-338
Change-Id: If5787991869a3105d82c27ffa0a86ac79b4b08ba
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Change-Id: I7b583c354843f0116a65b3a31f3be4589087b8a5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Add a new class of scenarios, based on existing baremetal HA
scenarios, but instead of having a virtualized control plane (VCP),
all Openstack controller services will run directly on the cluster
nodes.
This change adds the common scaffolding, as well as the OVS scenario.
The new scenario(s) can be used on full-baremetal clusters, soon on
full-virtual clusters and later on hybrid (virt + bare) clusters.
This change defines old (current) style scenario definitions for
both baremetal and virtual, both named:
- os-nosdn-nofeature-novcp-ha;
Prerequisites:
1. Merge-able by name reclass.storage.node definitions
Each cluster (e.g. database, telemetry) adds its own set of
reclass storage node defitions, which for novcp scenarios should
be merged into a single node (kvm) based on the 'name' property.
This is not currently supported by upstream reclass 'node.sls'
high state, so add support for it via an early patch (required
before salt-master-init.sh tries to handle reclass.storage).
2. common reclass classes for novcp
Some of the classes in `baremetal-...-common-ha` are not fit for
novcp as they define VCP-specific config/inheritance, so add new
versions of said classes with novcp in mind or adapt old classes:
- parameterize ctl hostname in `openstack_compute.yml`;
- new `openstack_control_novcp.yml`;
- new `openstack_init_novcp.yml`;
3. Handle hard set names in state files for baremetal nodes
Some of our state files (e.g. maas) hardcodes baremetal node names
to 'kvm', 'cmp', so we need to align the names in novcp scenario
with these values to re-use the maas state. As a future improvement
we should parameterize these names in all state files.
As a consequence, our baremetal controller nodes will also use
'kvm*' hostnames (instead of 'ctl*').
4. Add 'noifupdown' to all interfaces on kvm nodes to prevent duplicate
IPs/routes created at *any* ifup due to /etc/network/route-br-ex.
Patch salt-formula-linux to skip network restart on 'noifupdown',
also when routes are present on that interface.
JIRA: FUEL-310
Change-Id: Ic67778f63e5ee0334dbfe9547c7109ec1a938d61
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
- add missing network definitions for ODL node's 1st interface;
- add missing comments for `notify` global functions;
- fix or silence shellcheck issues;
JIRA: FUEL-322
Change-Id: Ie3341d29ab12ddf432db603ad865259afb54714e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
To prevent adding a gratuitous requirement on public being a real
Linux bridge on the jumpserver when baremetal nodes are present,
stop configuring any IP address information for the public virsh
network, allowing us to keep mocking it like we did before L3
information was read from IDF.
JIRA: FUEL-339
Change-Id: Id09ecac14825a80a0770c5969afad79b0235e08e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
For VCP-enabled scenarios, `cluster_public_host` and
`cluster_vip_address` both point to the public VIP of the cluster.
However, for upcoming NOVCP scenarios, `cluster_vip_address` resides
inside the management segment, so use `cluster_public_host` instead.
JIRA: FUEL-310
Change-Id: I13ef482e2c3116c991dfe91be81d0964f140f8e9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
|
|
Revert "salt: Use apt-mk 'stable' distribution"
Revert "reclass: apt_mk_version: stable"
This reverts commit d1b6119e288a31e015573363ce77790fec8684df.
This reverts commit 4563ea7d62238e8273d840a8d9c6c1e179ca584e.
Change-Id: I383db1f78a087045086096cbc674260b985fd913
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Horizon package from Mirantis mcp-repos does not require the fixup,
so limit its application to non-mcp packages.
Required for upcoming NOVCP scenarios, where we also have mcp-repos
APT source on the proxy nodes.
JIRA: FUEL-324
JIRA: FUEL-310
Change-Id: I4399af803c0a17e0aa8f3d7a7330e501a5eedf55
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|
|
Some sysadmins or distro defaults might blacklist br_netfilter, or
it might not be loaded at deploy start, account for these corner
cases too.
JIRA: FUEL-334
Change-Id: I3ca6cb3848df8d2af1625ff4e3816efe8b320886
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
|