diff options
Diffstat (limited to 'fuel/prototypes/auto-deploy/examples/libvirt')
15 files changed, 1751 insertions, 0 deletions
diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/README.txt b/fuel/prototypes/auto-deploy/examples/libvirt/README.txt new file mode 100644 index 000000000..9cbfa5486 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/README.txt @@ -0,0 +1,25 @@ +This is an example setup for the libvirt DHA adapter which will setup +four libvirt networks: + +fuel1: NATed network for management and admin +fuel2: Isolated network for storage +fuel3: Isolated network for private +fuel4: NATed network for public + +Four VMs will be created: + +fuel-master +controller1 +compute4 +compute5 + +Prerequisite: A Ubuntu 14.x host or later with sudo access. + +Start by installing the necessary Ubuntu packages by running +"sudo install_ubuntu_packages.sh". + +Then (re)generate the libvirt network and VM setup by running +"setup_vms.sh". + +You can then run deploy.sh with the corresponding dea.yaml and +dha.yaml which can be found in the conf subdirectory. diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml new file mode 100644 index 000000000..5d2f55f30 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dea.yaml @@ -0,0 +1,975 @@ +title: Deployment Environment Adapter (DEA) +# DEA API version supported +version: 1.1 +created: Sat Apr 25 16:26:22 UTC 2015 +comment: Small libvirt setup +nodes: +- id: 1 + interfaces: + eth0: + - fuelweb_admin + - management + eth1: + - storage + eth2: + - private + eth3: + - public + role: controller +- id: 2 + interfaces: + eth0: + - fuelweb_admin + - management + eth1: + - storage + eth2: + - private + eth3: + - public + role: compute +- id: 3 + interfaces: + eth0: + - fuelweb_admin + - management + eth1: + - storage + eth2: + - private + eth3: + - public + role: compute +environment_mode: multinode +environment_name: opnfv59-b +fuel: + ADMIN_NETWORK: + dhcp_pool_end: 10.20.0.254 + dhcp_pool_start: 10.20.0.3 + ipaddress: 10.20.0.2 + netmask: 255.255.255.0 + DNS_DOMAIN: domain.tld + DNS_SEARCH: domain.tld + DNS_UPSTREAM: 8.8.8.8 + FUEL_ACCESS: + password: admin + user: admin + HOSTNAME: opnfv59 + NTP1: 0.pool.ntp.org + NTP2: 1.pool.ntp.org + NTP3: 2.pool.ntp.org +controller: +- action: add-br + name: br-eth0 +- action: add-port + bridge: br-eth0 + name: eth0 +- action: add-br + name: br-eth1 +- action: add-port + bridge: br-eth1 + name: eth1 +- action: add-br + name: br-eth2 +- action: add-port + bridge: br-eth2 + name: eth2 +- action: add-br + name: br-eth3 +- action: add-port + bridge: br-eth3 + name: eth3 +- action: add-br + name: br-ex +- action: add-br + name: br-mgmt +- action: add-br + name: br-storage +- action: add-br + name: br-fw-admin +- action: add-patch + bridges: + - br-eth1 + - br-storage + tags: + - 102 + - 0 + vlan_ids: + - 102 + - 0 +- action: add-patch + bridges: + - br-eth0 + - br-mgmt + tags: + - 101 + - 0 + vlan_ids: + - 101 + - 0 +- action: add-patch + bridges: + - br-eth0 + - br-fw-admin + trunks: + - 0 +- action: add-patch + bridges: + - br-eth3 + - br-ex + trunks: + - 0 +- action: add-br + name: br-prv +- action: add-patch + bridges: + - br-eth2 + - br-prv +compute: +- action: add-br + name: br-eth0 +- action: add-port + bridge: br-eth0 + name: eth0 +- action: add-br + name: br-eth1 +- action: add-port + bridge: br-eth1 + name: eth1 +- action: add-br + name: br-eth2 +- action: add-port + bridge: br-eth2 + name: eth2 +- action: add-br + name: br-eth3 +- action: add-port + bridge: br-eth3 + name: eth3 +- action: add-br + name: br-mgmt +- action: add-br + name: br-storage +- action: add-br + name: br-fw-admin +- action: add-patch + bridges: + - br-eth1 + - br-storage + tags: + - 102 + - 0 + vlan_ids: + - 102 + - 0 +- action: add-patch + bridges: + - br-eth0 + - br-mgmt + tags: + - 101 + - 0 + vlan_ids: + - 101 + - 0 +- action: add-patch + bridges: + - br-eth0 + - br-fw-admin + trunks: + - 0 +- action: add-br + name: br-prv +- action: add-patch + bridges: + - br-eth2 + - br-prv +opnfv: + compute: {} + controller: {} +network: + networking_parameters: + base_mac: fa:16:3e:00:00:00 + dns_nameservers: + - 8.8.4.4 + - 8.8.8.8 + floating_ranges: + - - 172.16.0.130 + - 172.16.0.254 + gre_id_range: + - 2 + - 65535 + internal_cidr: 192.168.111.0/24 + internal_gateway: 192.168.111.1 + net_l23_provider: ovs + segmentation_type: vlan + vlan_range: + - 1000 + - 1030 + networks: + - cidr: 172.16.0.0/24 + gateway: 172.16.0.1 + ip_ranges: + - - 172.16.0.2 + - 172.16.0.126 + meta: + assign_vip: true + cidr: 172.16.0.0/24 + configurable: true + floating_range_var: floating_ranges + ip_range: + - 172.16.0.2 + - 172.16.0.126 + map_priority: 1 + name: public + notation: ip_ranges + render_addr_mask: public + render_type: null + use_gateway: true + vlan_start: null + name: public + vlan_start: null + - cidr: 192.168.0.0/24 + gateway: null + ip_ranges: + - - 192.168.0.1 + - 192.168.0.254 + meta: + assign_vip: true + cidr: 192.168.0.0/24 + configurable: true + map_priority: 2 + name: management + notation: cidr + render_addr_mask: internal + render_type: cidr + use_gateway: false + vlan_start: 101 + name: management + vlan_start: 101 + - cidr: 192.168.1.0/24 + gateway: null + ip_ranges: + - - 192.168.1.1 + - 192.168.1.254 + meta: + assign_vip: false + cidr: 192.168.1.0/24 + configurable: true + map_priority: 2 + name: storage + notation: cidr + render_addr_mask: storage + render_type: cidr + use_gateway: false + vlan_start: 102 + name: storage + vlan_start: 102 + - cidr: null + gateway: null + ip_ranges: [] + meta: + assign_vip: false + configurable: false + map_priority: 2 + name: private + neutron_vlan_range: true + notation: null + render_addr_mask: null + render_type: null + seg_type: vlan + use_gateway: false + vlan_start: null + name: private + vlan_start: null + - cidr: 10.20.0.0/24 + gateway: null + ip_ranges: + - - 10.20.0.3 + - 10.20.0.254 + meta: + assign_vip: false + configurable: false + map_priority: 0 + notation: ip_ranges + render_addr_mask: null + render_type: null + unmovable: true + use_gateway: true + name: fuelweb_admin + vlan_start: null +settings: + editable: + access: + email: + description: Email address for Administrator + label: email + type: text + value: admin@localhost + weight: 40 + metadata: + label: Access + weight: 10 + password: + description: Password for Administrator + label: password + type: password + value: admin + weight: 20 + tenant: + description: Tenant (project) name for Administrator + label: tenant + regex: + error: Invalid tenant name + source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* + type: text + value: admin + weight: 30 + user: + description: Username for Administrator + label: username + regex: + error: Invalid username + source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).* + type: text + value: admin + weight: 10 + additional_components: + ceilometer: + description: If selected, Ceilometer component will be installed + label: Install Ceilometer + type: checkbox + value: false + weight: 40 + heat: + description: '' + label: '' + type: hidden + value: true + weight: 30 + metadata: + label: Additional Components + weight: 20 + murano: + description: If selected, Murano component will be installed + label: Install Murano + restrictions: + - cluster:net_provider != 'neutron' + type: checkbox + value: false + weight: 20 + sahara: + description: If selected, Sahara component will be installed + label: Install Sahara + type: checkbox + value: false + weight: 10 + common: + auth_key: + description: Public key(s) to include in authorized_keys on deployed nodes + label: Public Key + type: text + value: '' + weight: 70 + auto_assign_floating_ip: + description: If selected, OpenStack will automatically assign a floating IP + to a new instance + label: Auto assign floating IP + restrictions: + - cluster:net_provider == 'neutron' + type: checkbox + value: false + weight: 40 + compute_scheduler_driver: + label: Scheduler driver + type: radio + value: nova.scheduler.filter_scheduler.FilterScheduler + values: + - data: nova.scheduler.filter_scheduler.FilterScheduler + description: Currently the most advanced OpenStack scheduler. See the OpenStack + documentation for details. + label: Filter scheduler + - data: nova.scheduler.simple.SimpleScheduler + description: This is 'naive' scheduler which tries to find the least loaded + host + label: Simple scheduler + weight: 40 + debug: + description: Debug logging mode provides more information, but requires more + disk space. + label: OpenStack debug logging + type: checkbox + value: false + weight: 20 + disable_offload: + description: If set, generic segmentation offload (gso) and generic receive + offload (gro) on physical nics will be disabled. See ethtool man. + label: Disable generic offload on physical nics + restrictions: + - action: hide + condition: cluster:net_provider == 'neutron' and networking_parameters:segmentation_type + == 'gre' + type: checkbox + value: true + weight: 80 + libvirt_type: + label: Hypervisor type + type: radio + value: kvm + values: + - data: kvm + description: Choose this type of hypervisor if you run OpenStack on hardware + label: KVM + restrictions: + - settings:common.libvirt_type.value == 'vcenter' + - data: qemu + description: Choose this type of hypervisor if you run OpenStack on virtual + hosts. + label: QEMU + restrictions: + - settings:common.libvirt_type.value == 'vcenter' + - data: vcenter + description: Choose this type of hypervisor if you run OpenStack in a vCenter + environment. + label: vCenter + restrictions: + - settings:common.libvirt_type.value != 'vcenter' or cluster:net_provider + == 'neutron' + weight: 30 + metadata: + label: Common + weight: 30 + nova_quota: + description: Quotas are used to limit CPU and memory usage for tenants. Enabling + quotas will increase load on the Nova database. + label: Nova quotas + type: checkbox + value: false + weight: 25 + resume_guests_state_on_host_boot: + description: Whether to resume previous guests state when the host reboots. + If enabled, this option causes guests assigned to the host to resume their + previous state. If the guest was running a restart will be attempted when + nova-compute starts. If the guest was not running previously, a restart + will not be attempted. + label: Resume guests state on host boot + type: checkbox + value: true + weight: 60 + use_cow_images: + description: For most cases you will want qcow format. If it's disabled, raw + image format will be used to run VMs. OpenStack with raw format currently + does not support snapshotting. + label: Use qcow format for images + type: checkbox + value: true + weight: 50 + corosync: + group: + description: '' + label: Group + type: text + value: 226.94.1.1 + weight: 10 + metadata: + label: Corosync + restrictions: + - action: hide + condition: 'true' + weight: 50 + port: + description: '' + label: Port + type: text + value: '12000' + weight: 20 + verified: + description: Set True only if multicast is configured correctly on router. + label: Need to pass network verification. + type: checkbox + value: false + weight: 10 + external_dns: + dns_list: + description: List of upstream DNS servers, separated by comma + label: DNS list + type: text + value: 8.8.8.8, 8.8.4.4 + weight: 10 + metadata: + label: Upstream DNS + weight: 90 + external_ntp: + metadata: + label: Upstream NTP + weight: 100 + ntp_list: + description: List of upstream NTP servers, separated by comma + label: NTP servers list + type: text + value: 0.pool.ntp.org, 1.pool.ntp.org + weight: 10 + kernel_params: + kernel: + description: Default kernel parameters + label: Initial parameters + type: text + value: console=ttyS0,9600 console=tty0 rootdelay=90 nomodeset + weight: 45 + metadata: + label: Kernel parameters + weight: 40 + neutron_mellanox: + metadata: + enabled: true + label: Mellanox Neutron components + toggleable: false + weight: 50 + plugin: + label: Mellanox drivers and SR-IOV plugin + type: radio + value: disabled + values: + - data: disabled + description: If selected, Mellanox drivers, Neutron and Cinder plugin will + not be installed. + label: Mellanox drivers and plugins disabled + restrictions: + - settings:storage.iser.value == true + - data: drivers_only + description: If selected, Mellanox Ethernet drivers will be installed to + support networking over Mellanox NIC. Mellanox Neutron plugin will not + be installed. + label: Install only Mellanox drivers + restrictions: + - settings:common.libvirt_type.value != 'kvm' + - data: ethernet + description: If selected, both Mellanox Ethernet drivers and Mellanox network + acceleration (Neutron) plugin will be installed. + label: Install Mellanox drivers and SR-IOV plugin + restrictions: + - settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider + == 'neutron' and networking_parameters:segmentation_type == 'vlan') + weight: 60 + vf_num: + description: Note that one virtual function will be reserved to the storage + network, in case of choosing iSER. + label: Number of virtual NICs + restrictions: + - settings:neutron_mellanox.plugin.value != 'ethernet' + type: text + value: '16' + weight: 70 + nsx_plugin: + connector_type: + description: Default network transport type to use + label: NSX connector type + type: select + value: stt + values: + - data: gre + label: GRE + - data: ipsec_gre + label: GRE over IPSec + - data: stt + label: STT + - data: ipsec_stt + label: STT over IPSec + - data: bridge + label: Bridge + weight: 80 + l3_gw_service_uuid: + description: UUID for the default L3 gateway service to use with this cluster + label: L3 service UUID + regex: + error: Invalid L3 gateway service UUID + source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' + type: text + value: '' + weight: 50 + metadata: + enabled: false + label: VMware NSX + restrictions: + - action: hide + condition: cluster:net_provider != 'neutron' or networking_parameters:net_l23_provider + != 'nsx' + weight: 20 + nsx_controllers: + description: One or more IPv4[:port] addresses of NSX controller node, separated + by comma (e.g. 10.30.30.2,192.168.110.254:443) + label: NSX controller endpoint + regex: + error: Invalid controller endpoints, specify valid IPv4[:port] pair + source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(,(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?)*$ + type: text + value: '' + weight: 60 + nsx_password: + description: Password for Administrator + label: NSX password + regex: + error: Empty password + source: \S + type: password + value: '' + weight: 30 + nsx_username: + description: NSX administrator's username + label: NSX username + regex: + error: Empty username + source: \S + type: text + value: admin + weight: 20 + packages_url: + description: URL to NSX specific packages + label: URL to NSX bits + regex: + error: Invalid URL, specify valid HTTP/HTTPS URL with IPv4 address (e.g. + http://10.20.0.2/nsx) + source: ^https?://(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(/.*)?$ + type: text + value: '' + weight: 70 + replication_mode: + description: '' + label: NSX cluster has Service nodes + type: checkbox + value: true + weight: 90 + transport_zone_uuid: + description: UUID of the pre-existing default NSX Transport zone + label: Transport zone UUID + regex: + error: Invalid transport zone UUID + source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}' + type: text + value: '' + weight: 40 + provision: + metadata: + label: Provision + restrictions: + - action: hide + condition: not ('experimental' in version:feature_groups) + weight: 80 + method: + description: Which provision method to use for this cluster. + label: Provision method + type: radio + value: cobbler + values: + - data: image + description: Copying pre-built images on a disk. + label: Image + - data: cobbler + description: Install from scratch using anaconda or debian-installer. + label: Classic (use anaconda or debian-installer) + public_network_assignment: + assign_to_all_nodes: + description: When disabled, public network will be assigned to controllers + and zabbix-server only + label: Assign public network to all nodes + type: checkbox + value: false + weight: 10 + metadata: + label: Public network assignment + restrictions: + - action: hide + condition: cluster:net_provider != 'neutron' + weight: 50 + storage: + ephemeral_ceph: + description: Configures Nova to store ephemeral volumes in RBD. This works + best if Ceph is enabled for volumes and images, too. Enables live migration + of all types of Ceph backed VMs (without this option, live migration will + only work with VMs launched from Cinder volumes). + label: Ceph RBD for ephemeral volumes (Nova) + restrictions: + - settings:common.libvirt_type.value == 'vcenter' + type: checkbox + value: false + weight: 75 + images_ceph: + description: Configures Glance to use the Ceph RBD backend to store images. + If enabled, this option will prevent Swift from installing. + label: Ceph RBD for images (Glance) + type: checkbox + value: false + weight: 30 + images_vcenter: + description: Configures Glance to use the vCenter/ESXi backend to store images. + If enabled, this option will prevent Swift from installing. + label: VMWare vCenter/ESXi datastore for images (Glance) + restrictions: + - settings:common.libvirt_type.value != 'vcenter' + type: checkbox + value: false + weight: 35 + iser: + description: 'High performance block storage: Cinder volumes over iSER protocol + (iSCSI over RDMA). This feature requires SR-IOV capabilities in the NIC, + and will use a dedicated virtual function for the storage network.' + label: iSER protocol for volumes (Cinder) + restrictions: + - settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value + != 'kvm' + type: checkbox + value: false + weight: 11 + metadata: + label: Storage + weight: 60 + objects_ceph: + description: Configures RadosGW front end for Ceph RBD. This exposes S3 and + Swift API Interfaces. If enabled, this option will prevent Swift from installing. + label: Ceph RadosGW for objects (Swift API) + restrictions: + - settings:storage.images_ceph.value == false + type: checkbox + value: false + weight: 80 + osd_pool_size: + description: Configures the default number of object replicas in Ceph. This + number must be equal to or lower than the number of deployed 'Storage - + Ceph OSD' nodes. + label: Ceph object replication factor + regex: + error: Invalid number + source: ^[1-9]\d*$ + restrictions: + - settings:common.libvirt_type.value == 'vcenter' + type: text + value: '2' + weight: 85 + vc_datacenter: + description: Inventory path to a datacenter. If you want to use ESXi host + as datastore, it should be "ha-datacenter". + label: Datacenter name + regex: + error: Empty datacenter + source: \S + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: text + value: '' + weight: 65 + vc_datastore: + description: Datastore associated with the datacenter. + label: Datastore name + regex: + error: Empty datastore + source: \S + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: text + value: '' + weight: 60 + vc_host: + description: IP Address of vCenter/ESXi + label: vCenter/ESXi IP + regex: + error: Specify valid IPv4 address + source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: text + value: '' + weight: 45 + vc_image_dir: + description: The name of the directory where the glance images will be stored + in the VMware datastore. + label: Datastore Images directory + regex: + error: Empty images directory + source: \S + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: text + value: /openstack_glance + weight: 70 + vc_password: + description: vCenter/ESXi admin password + label: Password + regex: + error: Empty password + source: \S + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: password + value: '' + weight: 55 + vc_user: + description: vCenter/ESXi admin username + label: Username + regex: + error: Empty username + source: \S + restrictions: + - action: hide + condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value + != 'vcenter' + type: text + value: '' + weight: 50 + volumes_ceph: + description: Configures Cinder to store volumes in Ceph RBD images. + label: Ceph RBD for volumes (Cinder) + restrictions: + - settings:storage.volumes_lvm.value == true or settings:common.libvirt_type.value + == 'vcenter' + type: checkbox + value: false + weight: 20 + volumes_lvm: + description: Requires at least one Storage - Cinder LVM node. + label: Cinder LVM over iSCSI for volumes + restrictions: + - settings:storage.volumes_ceph.value == true + type: checkbox + value: true + weight: 10 + volumes_vmdk: + description: Configures Cinder to store volumes via VMware vCenter. + label: VMware vCenter for volumes (Cinder) + restrictions: + - settings:common.libvirt_type.value != 'vcenter' or settings:storage.volumes_lvm.value + == true + type: checkbox + value: false + weight: 15 + syslog: + metadata: + label: Syslog + weight: 50 + syslog_port: + description: Remote syslog port + label: Port + regex: + error: Invalid Syslog port + source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$ + type: text + value: '514' + weight: 20 + syslog_server: + description: Remote syslog hostname + label: Hostname + type: text + value: '' + weight: 10 + syslog_transport: + label: Syslog transport protocol + type: radio + value: tcp + values: + - data: udp + description: '' + label: UDP + - data: tcp + description: '' + label: TCP + weight: 30 + vcenter: + cluster: + description: vCenter cluster name. If you have multiple clusters, use comma + to separate names + label: Cluster + regex: + error: Invalid cluster list + source: ^([^,\ ]+([\ ]*[^,\ ])*)(,[^,\ ]+([\ ]*[^,\ ])*)*$ + type: text + value: '' + weight: 40 + datastore_regex: + description: The Datastore regexp setting specifies the data stores to use + with Compute. For example, "nas.*". If you want to use all available datastores, + leave this field blank + label: Datastore regexp + regex: + error: Invalid datastore regexp + source: ^(\S.*\S|\S|)$ + type: text + value: '' + weight: 50 + host_ip: + description: IP Address of vCenter + label: vCenter IP + regex: + error: Specify valid IPv4 address + source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$ + type: text + value: '' + weight: 10 + metadata: + label: vCenter + restrictions: + - action: hide + condition: settings:common.libvirt_type.value != 'vcenter' + weight: 20 + use_vcenter: + description: '' + label: '' + type: hidden + value: true + weight: 5 + vc_password: + description: vCenter admin password + label: Password + regex: + error: Empty password + source: \S + type: password + value: admin + weight: 30 + vc_user: + description: vCenter admin username + label: Username + regex: + error: Empty username + source: \S + type: text + value: admin + weight: 20 + vlan_interface: + description: Physical ESXi host ethernet adapter for VLAN networking (e.g. + vmnic1). If empty "vmnic0" is used by default + label: ESXi VLAN interface + restrictions: + - action: hide + condition: cluster:net_provider != 'nova_network' or networking_parameters:net_manager + != 'VlanManager' + type: text + value: '' + weight: 60 + zabbix: + metadata: + label: Zabbix Access + restrictions: + - action: hide + condition: not ('experimental' in version:feature_groups) + weight: 70 + password: + description: Password for Zabbix Administrator + label: password + type: password + value: zabbix + weight: 20 + username: + description: Username for Zabbix Administrator + label: username + type: text + value: admin + weight: 10 diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml new file mode 100644 index 000000000..66395e86b --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/dha.yaml @@ -0,0 +1,49 @@ +title: Deployment Hardware Adapter (DHA) +# DHA API version supported +version: 1.1 +created: Sat Apr 25 16:26:22 UTC 2015 +comment: Small libvirt setup + +# Adapter to use for this definition +adapter: libvirt + +# Node list. +# Mandatory fields are id and role. +# The MAC address of the PXE boot interface is not mandatory +# to be set, but the field must be present. +# All other fields are adapter specific. + +nodes: +- id: 1 + pxeMac: 52:54:00:aa:dd:84 + libvirtName: controller1 +- id: 2 + pxeMac: 52:54:00:41:64:f3 + libvirtName: compute4 +- id: 3 + pxeMac: 52:54:00:69:a0:79 + libvirtName: compute5 +- id: 4 + pxeMac: 52:54:00:f8:b0:75 + libvirtName: fuel-master + isFuel: yes + +# Deployment power on strategy +# all: Turn on all nodes at once. There will be no correlation +# between the DHA and DEA node numbering. MAC addresses +# will be used to select the node roles though. +# sequence: Turn on the nodes in sequence starting with the lowest order +# node and wait for the node to be detected by Fuel. Not until +# the node has been detected and assigned a role will the next +# node be turned on. +powerOnStrategy: all + +# If fuelCustomInstall is set to true, Fuel is assumed to be installed by +# calling the DHA adapter function "dha_fuelCustomInstall()" with two +# arguments: node ID and the ISO file name to deploy. The custom install +# function is then to handle all necessary logic to boot the Fuel master +# from the ISO and then return. +# Allowed values: true, false + +fuelCustomInstall: false + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 new file mode 100644 index 000000000..7b2b15423 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel1 @@ -0,0 +1,12 @@ +<network> + <name>fuel1</name> + <forward mode='nat'> + <nat> + <port start='1024' end='65535'/> + </nat> + </forward> + <bridge name='fuel1' stp='on' delay='0'/> + <ip address='10.20.0.1' netmask='255.255.255.0'> + </ip> +</network> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 new file mode 100644 index 000000000..615c92094 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel2 @@ -0,0 +1,5 @@ +<network> + <name>fuel2</name> + <bridge name='fuel2' stp='on' delay='0'/> +</network> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 new file mode 100644 index 000000000..2383e6c1f --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel3 @@ -0,0 +1,5 @@ +<network> + <name>fuel3</name> + <bridge name='fuel3' stp='on' delay='0'/> +</network> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 new file mode 100644 index 000000000..5b69f912d --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/networks/fuel4 @@ -0,0 +1,12 @@ +<network> + <name>fuel4</name> + <forward mode='nat'> + <nat> + <port start='1024' end='65535'/> + </nat> + </forward> + <bridge name='fuel4' stp='on' delay='0'/> + <ip address='172.16.0.1' netmask='255.255.255.0'> + </ip> +</network> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 new file mode 100644 index 000000000..ad5d4d1c8 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute4 @@ -0,0 +1,107 @@ +<domain type='kvm'> + <name>compute4</name> + <uuid>6206efbf-18e1-492e-951a-60eda6676ef5</uuid> + <memory unit='KiB'>8388608</memory> + <currentMemory unit='KiB'>8388608</currentMemory> + <vcpu placement='static'>2</vcpu> + <os> + <type arch='x86_64' machine='pc-1.0'>hvm</type> + <boot dev='network'/> + <boot dev='hd'/> + <bootmenu enable='yes'/> + <bios rebootTimeout='30000'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <cpu mode='custom' match='exact'> + <model fallback='allow'>SandyBridge</model> + <vendor>Intel</vendor> + <feature policy='require' name='vme'/> + <feature policy='require' name='dtes64'/> + <feature policy='require' name='vmx'/> + <feature policy='require' name='erms'/> + <feature policy='require' name='xtpr'/> + <feature policy='require' name='smep'/> + <feature policy='require' name='pcid'/> + <feature policy='require' name='est'/> + <feature policy='require' name='monitor'/> + <feature policy='require' name='smx'/> + <feature policy='require' name='tm'/> + <feature policy='require' name='acpi'/> + <feature policy='require' name='osxsave'/> + <feature policy='require' name='ht'/> + <feature policy='require' name='pdcm'/> + <feature policy='require' name='fsgsbase'/> + <feature policy='require' name='f16c'/> + <feature policy='require' name='ds'/> + <feature policy='require' name='tm2'/> + <feature policy='require' name='ss'/> + <feature policy='require' name='pbe'/> + <feature policy='require' name='ds_cpl'/> + <feature policy='require' name='rdrand'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/usr/bin/kvm</emulator> + <disk type='file' device='disk'> + <driver name='qemu' type='raw'/> + <source file='disk.raw'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <interface type='network'> + <mac address='52:54:00:41:64:f3'/> + <source network='fuel1'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:67:00:5e'/> + <source network='fuel2'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:3e:dd:0d'/> + <source network='fuel3'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:a6:3c:32'/> + <source network='fuel4'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> + <sound model='ich6'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </sound> + <video> + <model type='cirrus' vram='9216' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> + </memballoon> + </devices> +</domain> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 new file mode 100644 index 000000000..39059066c --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/compute5 @@ -0,0 +1,106 @@ +<domain type='kvm'> + <name>compute5</name> + <uuid>2c1e50fa-110f-4ab7-98ff-7c5e08c8f38f</uuid> + <memory unit='KiB'>8388608</memory> + <currentMemory unit='KiB'>8388608</currentMemory> + <vcpu placement='static'>2</vcpu> + <os> + <type arch='x86_64' machine='pc-1.0'>hvm</type> + <boot dev='network'/> + <boot dev='hd'/> + <bios rebootTimeout='30000'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <cpu mode='custom' match='exact'> + <model fallback='allow'>SandyBridge</model> + <vendor>Intel</vendor> + <feature policy='require' name='vme'/> + <feature policy='require' name='dtes64'/> + <feature policy='require' name='vmx'/> + <feature policy='require' name='erms'/> + <feature policy='require' name='xtpr'/> + <feature policy='require' name='smep'/> + <feature policy='require' name='pcid'/> + <feature policy='require' name='est'/> + <feature policy='require' name='monitor'/> + <feature policy='require' name='smx'/> + <feature policy='require' name='tm'/> + <feature policy='require' name='acpi'/> + <feature policy='require' name='osxsave'/> + <feature policy='require' name='ht'/> + <feature policy='require' name='pdcm'/> + <feature policy='require' name='fsgsbase'/> + <feature policy='require' name='f16c'/> + <feature policy='require' name='ds'/> + <feature policy='require' name='tm2'/> + <feature policy='require' name='ss'/> + <feature policy='require' name='pbe'/> + <feature policy='require' name='ds_cpl'/> + <feature policy='require' name='rdrand'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/usr/bin/kvm</emulator> + <disk type='file' device='disk'> + <driver name='qemu' type='raw'/> + <source file='disk.raw'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <interface type='network'> + <mac address='52:54:00:69:a0:79'/> + <source network='fuel1'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:58:4c:df'/> + <source network='fuel2'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:27:54:1d'/> + <source network='fuel3'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:84:b8:c4'/> + <source network='fuel4'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> + <sound model='ich6'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </sound> + <video> + <model type='cirrus' vram='9216' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> + </memballoon> + </devices> +</domain> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 new file mode 100644 index 000000000..ca1bd3b05 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/controller1 @@ -0,0 +1,106 @@ +<domain type='kvm'> + <name>controller1</name> + <uuid>ce9897c1-d9e7-452c-b998-9fad0cf5b9db</uuid> + <memory unit='KiB'>2097152</memory> + <currentMemory unit='KiB'>2097152</currentMemory> + <vcpu placement='static'>2</vcpu> + <os> + <type arch='x86_64' machine='pc-1.0'>hvm</type> + <boot dev='network'/> + <boot dev='hd'/> + <bios rebootTimeout='30000'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <cpu mode='custom' match='exact'> + <model fallback='allow'>SandyBridge</model> + <vendor>Intel</vendor> + <feature policy='require' name='vme'/> + <feature policy='require' name='dtes64'/> + <feature policy='require' name='vmx'/> + <feature policy='require' name='erms'/> + <feature policy='require' name='xtpr'/> + <feature policy='require' name='smep'/> + <feature policy='require' name='pcid'/> + <feature policy='require' name='est'/> + <feature policy='require' name='monitor'/> + <feature policy='require' name='smx'/> + <feature policy='require' name='tm'/> + <feature policy='require' name='acpi'/> + <feature policy='require' name='osxsave'/> + <feature policy='require' name='ht'/> + <feature policy='require' name='pdcm'/> + <feature policy='require' name='fsgsbase'/> + <feature policy='require' name='f16c'/> + <feature policy='require' name='ds'/> + <feature policy='require' name='tm2'/> + <feature policy='require' name='ss'/> + <feature policy='require' name='pbe'/> + <feature policy='require' name='ds_cpl'/> + <feature policy='require' name='rdrand'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/usr/bin/kvm</emulator> + <disk type='file' device='disk'> + <driver name='qemu' type='raw'/> + <source file='disk.raw'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> + </disk> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <interface type='network'> + <mac address='52:54:00:aa:dd:84'/> + <source network='fuel1'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:e4:6e:d9'/> + <source network='fuel2'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:60:88:73'/> + <source network='fuel3'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> + </interface> + <interface type='network'> + <mac address='52:54:00:f0:b2:0f'/> + <source network='fuel4'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes' keymap='sv'/> + <sound model='ich6'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </sound> + <video> + <model type='cirrus' vram='9216' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> + </memballoon> + </devices> +</domain> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master new file mode 100644 index 000000000..d2a78411c --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/conf/vms/fuel-master @@ -0,0 +1,102 @@ +<domain type='kvm'> + <name>fuel-master</name> + <uuid>caabab80-b42f-4f9d-9c0d-18f274c4cb58</uuid> + <memory unit='KiB'>2097152</memory> + <currentMemory unit='KiB'>2097152</currentMemory> + <vcpu placement='static'>2</vcpu> + <resource> + <partition>/machine</partition> + </resource> + <os> + <type arch='x86_64' machine='pc-1.0'>hvm</type> + <boot dev='hd'/> + <boot dev='cdrom'/> + <bootmenu enable='no'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <cpu mode='custom' match='exact'> + <model fallback='allow'>SandyBridge</model> + <vendor>Intel</vendor> + <feature policy='require' name='vme'/> + <feature policy='require' name='dtes64'/> + <feature policy='require' name='vmx'/> + <feature policy='require' name='erms'/> + <feature policy='require' name='xtpr'/> + <feature policy='require' name='smep'/> + <feature policy='require' name='pcid'/> + <feature policy='require' name='est'/> + <feature policy='require' name='monitor'/> + <feature policy='require' name='smx'/> + <feature policy='require' name='tm'/> + <feature policy='require' name='acpi'/> + <feature policy='require' name='osxsave'/> + <feature policy='require' name='ht'/> + <feature policy='require' name='pdcm'/> + <feature policy='require' name='fsgsbase'/> + <feature policy='require' name='f16c'/> + <feature policy='require' name='ds'/> + <feature policy='require' name='tm2'/> + <feature policy='require' name='ss'/> + <feature policy='require' name='pbe'/> + <feature policy='require' name='ds_cpl'/> + <feature policy='require' name='rdrand'/> + </cpu> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/usr/bin/kvm</emulator> + <disk type='block' device='cdrom'> + <driver name='qemu' type='raw'/> + <target dev='hdc' bus='ide'/> + <readonly/> + <address type='drive' controller='0' bus='1' target='0' unit='0'/> + </disk> + <disk type='file' device='disk'> + <driver name='qemu' type='raw'/> + <source file='disk.raw'/> + <target dev='vda' bus='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> + </disk> + <controller type='ide' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> + </controller> + <controller type='usb' index='0'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> + </controller> + <controller type='pci' index='0' model='pci-root'/> + <interface type='network'> + <mac address='52:54:00:f8:b0:75'/> + <source network='fuel1'/> + <model type='virtio'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> + </interface> + <serial type='pty'> + <target port='0'/> + </serial> + <console type='pty'> + <target type='serial' port='0'/> + </console> + <input type='mouse' bus='ps2'/> + <input type='keyboard' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1' keymap='sv'> + <listen type='address' address='127.0.0.1'/> + </graphics> + <sound model='ich6'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> + </sound> + <video> + <model type='cirrus' vram='9216' heads='1'/> + <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> + </video> + <memballoon model='virtio'> + <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> + </memballoon> + </devices> +</domain> + diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh b/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh new file mode 100755 index 000000000..58ce19ac6 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/install-ubuntu-packages.sh @@ -0,0 +1,16 @@ +#!/bin/bash +############################################################################## +# Copyright (c) 2015 Ericsson AB and others. +# stefan.k.berg@ericsson.com +# jonas.bjurel@ericsson.com +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## + +# Tools for installation on the libvirt server/base host +# +apt-get install -y libvirt-bin qemu-kvm tightvncserver virt-manager \ + sshpass fuseiso genisoimage blackbox xterm +restart libvirt-bin diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh b/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh new file mode 100755 index 000000000..e0388ac66 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/setup_example_vms.sh @@ -0,0 +1,105 @@ +#!/bin/bash +############################################################################## +# Copyright (c) 2015 Ericsson AB and others. +# stefan.k.berg@ericsson.com +# jonas.bjurel@ericsson.com +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## + +exit_handler() { + rm $tmpfile +} + + +error_exit () { + echo "$@" + exit 1 +} + +trap exit_handler EXIT + +# You can change these disk sizes to adapt to your needs +fueldisk="30G" +controllerdisk="20G" +computedisk="20G" + + +topdir=$(dirname $(readlink -f $BASH_SOURCE)) +netdir=$topdir/conf/networks +vmdir=$topdir/conf/vms +tmpfile=`mktemp /tmp/XXXXX` + +if [ ! -d $netdir ]; then + error_exit "No net directory $netdir" + exit 1 +elif [ ! -d $vmdir ]; then + error_exit "No VM directory $vmdir" + exit 1 +fi + +if [ $# -ne 1 ]; then + echo "Argument error." + echo "`basename $0` <path to storage dir>" + exit 1 +fi + +if [ "`whoami`" != "root" ]; then + error_exit "You need be root to run this script" +fi + +echo "Cleaning up" +tools/cleanup_example_vms.sh + +storagedir=$1 + +if [ ! -d $storagedir ]; then + error_exit "Could not find storagedir directory $storagedir" +fi + +# Create storage space and patch it in +for vm in $vmdir/* +do + vmname=`basename $vm` + virsh dumpxml $vmname >/dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "Found vm $vmname, deleting" + virsh destroy $vmname + virsh undefine $vmname + sleep 10 + + fi + + + storage=${storagedir}/`basename ${vm}`.raw + if [ -f ${storage} ]; then + echo "Storage already present, removing: $storage" + rm $storage + fi + + echo `basename $vm` | grep -q fuel-master && size=$fueldisk + echo `basename $vm` | grep -q controller && size=$controllerdisk + echo `basename $vm` | grep -q compute && size=$computedisk + + echo "Creating ${size} GB of storage in ${storage}" + fallocate -l ${size} ${storage} || \ + error_exit "Could not create storage" + sed "s:<source file='disk.raw':<source file='${storage}':" $vm >$tmpfile + virsh define $tmpfile +done + +for net in $netdir/* +do + netname=`basename $net` + virsh net-dumpxml $netname >/dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "Found net $netname, deleting" + virsh net-destroy $netname + virsh net-undefine $netname + fi + virsh net-define $net + virsh net-autostart $netname + virsh net-start $netname +done diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh b/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh new file mode 100755 index 000000000..960b21ea6 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/tools/cleanup_example_vms.sh @@ -0,0 +1,58 @@ +#!/bin/bash +############################################################################## +# Copyright (c) 2015 Ericsson AB and others. +# stefan.k.berg@ericsson.com +# jonas.bjurel@ericsson.com +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## + + +error_exit () { + echo "$@" + exit 1 +} + +topdir=$(cd $(dirname $(readlink -f $BASH_SOURCE)); cd ..; pwd) +netdir=$topdir/conf/networks +vmdir=$topdir/conf/vms + +if [ ! -d $netdir ]; then + error_exit "No net directory $netdir" + exit 1 +elif [ ! -d $vmdir ]; then + error_exit "No VM directory $vmdir" + exit 1 +fi + + +if [ "`whoami`" != "root" ]; then + error_exit "You need be root to run this script" +fi + +for vm in $vmdir/* +do + vmname=`basename $vm` + virsh dumpxml $vmname >/dev/null 2>&1 + if [ $? -eq 0 ]; then + diskfile=`virsh dumpxml $vmname | grep "<source file=" | grep raw | \ + sed "s/.*<source file='\(.*\)'.*/\1/"` + echo "Removing $vmname with disk $diskfile" + virsh destroy $vmname 2>/dev/null + virsh undefine $vmname + rm -f $diskfile + fi +done + +for net in $netdir/* +do + netname=`basename $net` + virsh net-dumpxml $netname >/dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "Found net $netname, deleting" + virsh net-destroy $netname + virsh net-undefine $netname + fi +done diff --git a/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh b/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh new file mode 100755 index 000000000..cdd029fc5 --- /dev/null +++ b/fuel/prototypes/auto-deploy/examples/libvirt/tools/dump_setup.sh @@ -0,0 +1,68 @@ +#!/bin/bash +############################################################################## +# Copyright (c) 2015 Ericsson AB and others. +# stefan.k.berg@ericsson.com +# jonas.bjurel@ericsson.com +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## + +topdir=$(cd $(dirname $(readlink -f $BASH_SOURCE)); cd ..; pwd) +netdir=$topdir/conf/networks +vmdir=$topdir/conf/vms +vms="fuel-master controller1 compute4 compute5" +networks="fuel1 fuel2 fuel3 fuel4" + + +if [ "`whoami`" != "root" ]; then + error_exit "You need be root to run this script" +fi + +mkdir -p $netdir +mkdir -p $vmdir + +if [ `ls -1 $netdir/ | wc -l` -ne 0 ]; then + echo "There are files in $netdir already!" + exit 1 +elif [ `ls -1 $vmdir/ | wc -l` -ne 0 ]; then + echo "There are files in $vmdir already!" + exit 1 +fi + + +# Check that no VM is up +for vm in $vms +do + if [ "`virsh domstate $vm`" == "running" ]; then + echo "Can't dump while VM are up: $vm" + exit 1 + fi +done + +# Dump all networks in the fuell* namespace +for net in $networks +do + virsh net-dumpxml $net > $netdir/$net +done + +# Dump all fuel-master, compute* and controller* VMs +for vm in $vms +do + virsh dumpxml $vm > $vmdir/$vm +done + +# Remove all attached ISOs, generalize disk file +for vm in $vmdir/* +do + sed -i '/.iso/d' $vm + sed -i "s/<source file='.*raw'/<source file='disk.raw'/" $vm +done + +# Generalize all nets +for net in $netdir/* +do + sed -i '/<uuid/d' $net + sed -i '/<mac/d' $net +done |