diff options
Diffstat (limited to 'fuel/build/f_isoroot/f_predeployment')
| -rw-r--r-- | fuel/build/f_isoroot/f_predeployment/Makefile | 28 | ||||
| -rw-r--r-- | fuel/build/f_isoroot/f_predeployment/README | 18 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/pre-deploy.sh | 401 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/sysinfo.sh | 12 | ||||
| -rwxr-xr-x | fuel/build/f_isoroot/f_predeployment/transform_yaml.py | 68 |
5 files changed, 0 insertions, 527 deletions
diff --git a/fuel/build/f_isoroot/f_predeployment/Makefile b/fuel/build/f_isoroot/f_predeployment/Makefile deleted file mode 100644 index a5252df96..000000000 --- a/fuel/build/f_isoroot/f_predeployment/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -TOP := $(shell pwd) - -.PHONY: all -all: - @mkdir -p release/opnfv - @cp pre-deploy.sh release/opnfv - @cp sysinfo.sh release/opnfv - @cp transform_yaml.py release/opnfv - @chmod 755 release/opnfv/* - -.PHONY: clean -clean: - @rm -rf release - - -.PHONY: release -release:clean all - @cp -Rvp release/* ../release diff --git a/fuel/build/f_isoroot/f_predeployment/README b/fuel/build/f_isoroot/f_predeployment/README deleted file mode 100644 index 3eef9f216..000000000 --- a/fuel/build/f_isoroot/f_predeployment/README +++ /dev/null @@ -1,18 +0,0 @@ -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -This is the start of the interactive frontend that will add OPNFV configuration into -the astute.yaml of the nodes. Currently just a test setup - prepare an installation -up to the point of "deploy changes", but run "./pre-deploy.sh <envid> fragment.yaml" -before actually hitting deploy, which will make sure to add the example fragment to -the nodes. - -Note that the only part of the fragment.yaml that actually is acted on is the hosts -part at this time. diff --git a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh b/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh deleted file mode 100755 index c5c6c42c0..000000000 --- a/fuel/build/f_isoroot/f_predeployment/pre-deploy.sh +++ /dev/null @@ -1,401 +0,0 @@ -#!/bin/bash -e -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - - -error_exit () { - echo "$@" >&2 - exit 1 -} - -get_env() { - local env_id=${1:-""} - - if [ -z $env_id ]; then - local n_envs=$(fuel env --list | grep -v -E "^id|^--|^ *$" | wc -l) - if [ $n_envs -ne 1 ]; then - echo "Usage: $0 [<env-id>]" >&2 - error_exit "If only a single environment is present it can be left" \ - "out. Otherwise the environment must be selected" - fi - env_id=$(fuel env --list | grep -v -E "^id|^--" | awk '{print $1}') - else - if ! fuel --env $env_id environment 2>/dev/null grep -v -E "^id|^--" | \ - grep -q ^$env_id; then - error_exit "No such environment ID: $env_id" - fi - fi - echo $env_id -} - -get_node_uid () { - cat $1 | grep "^uid: " | sed "s/^uid: '//" | sed "s/'$//" -} - -get_node_role () { - cat $1 | grep "^role: " | sed "s/^role: //" -} - -get_next_cic () { - file=$1 - - last=`cat $file | sed 's/.*://' | grep "cic-" | sed 's/cic\-.*sl//' | sort -n | tail -1` - if [ -z "$last" ]; then - next=1 - else - next=$[$last + 2] - fi - echo $next -} - -get_next_compute () { - file=$1 - - last=`cat $file | sed 's/.*://' | grep "cmp-" | sed 's/cmp\-.*sl//' | sort -n | tail -1` - if [ -z "$last" ]; then - next=7 - else - next=$[$last + 2] - fi - echo $next -} - -modify_hostnames () { - env=$1 - file=$2 - for line in `cat $file` - do - old=`echo $line | sed 's/:.*//'` - new=`echo $line | sed 's/.*://'` - echo "Applying: $old -> $new" - - for dfile in deployment_$env/*.yaml - do - sed -i "s/$old/$new/g" $dfile - done - - for pfile in provisioning_$env/*.yaml - do - sed -i "s/$old/$new/g" $pfile - done - done -} - -setup_hostnames () { - ENV=$1 - cd ${CONFIGDIR} - touch hostnames.$ENV - - for dfile in deployment_$ENV/*.yaml - do - uid=`get_node_uid $dfile` - hostname=`grep "^node-$uid:" hostnames.$ENV | sed 's/.*://'` - if [ -z $hostname ]; then - - pfile=provisioning_$ENV/node-$uid.yaml - role=`get_node_role $dfile` - - case $role in - primary-controller) - hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`" - ;; - controller) - hostname="cic-pod0-sh0-sl`get_next_cic hostnames.$ENV`" - ;; - compute) - hostname="cmp-pod0-sh0-sl`get_next_compute hostnames.$ENV`" - ;; - *) - echo "Unknown node type for UID $uid" - exit 1 - ;; - esac - - echo "node-$uid:$hostname" >> hostnames.$ENV - else - echo "Already got hostname $hostname for node-$uid" - - fi - done - - rm -f hostnames.$ENV.old - mv hostnames.$ENV hostnames.$ENV.old - sort hostnames.$ENV.old | uniq > hostnames.$ENV - modify_hostnames $ENV hostnames.$ENV -} - - - -get_provisioning_info () { - ENV=$1 - mkdir -p ${CONFIGDIR} - cd ${CONFIGDIR} - rm -Rf provisioning_$ENV - echo "Getting provisioning info..." - fuel --env $ENV provisioning --default - if [ $? -ne 0 ]; then - echo "Error: Could not get provisioning info for env $ENV">&2 - exit 1 - fi -} - -get_deployment_info () { - ENV=$1 - mkdir -p ${CONFIGDIR} - cd ${CONFIGDIR} - rm -Rf deployment_$ENV - echo "Getting deployment info..." - fuel --env $ENV deployment --default - if [ $? -ne 0 ]; then - echo "Error: Could not get deployment info for env $ENV">&2 - exit 1 - fi -} - -transform_yaml () { - ENV=$1 - cd ${CONFIGDIR} - for dfile in deployment_$ENV/*.yaml - do - /opt/opnfv/transform_yaml.py $dfile - done -} - -commit_changes () { - ENV=$1 - cd ${CONFIGDIR} - - fuel --env $ENV deployment --upload - fuel --env $ENV provisioning --upload -} - -add_yaml_fragment () { - ENV=$1 - FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV - - cd ${CONFIGDIR} - for dfile in deployment_$ENV/*.yaml - do - cnt=`grep "^opnfv:" $dfile | wc -l ` - if [ $cnt -eq 0 ]; then - echo "Adding fragment to $dfile" - cat $FRAGMENT >> $dfile - else - echo "Already have fragment in $dfile" - fi - done -} - - -ip_valid() { - IP_ADDRESS="$1" - # Check if the format looks right_ - echo "$IP_ADDRESS" | egrep -qE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' || return 1 - #check that each octect is less than or equal to 255: - echo $IP_ADDRESS | awk -F'.' '$1 <=255 && $2 <= 255 && $3 <=255 && $4 <= 255 {print "Y" } ' | grep -q Y || return 1 - return 0 -} - - -generate_ntp_entry() { - FILE=$1 - read -p "NTP server:" NTP_SERVER - if [ -z "$NTP_SERVER" ]; then - return 1 - elif confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " server $NTP_SERVER" >> $FILE - fi -} - -generate_hostfile_entry() { - FILE=$1 - read -p "Name:" HOST_NAME - if [ -z "$HOST_NAME" ]; then - return 1 - else - read -p "FQDN:" HOST_FQDN - read -p "IP: " HOST_IP - while ! ip_valid "$HOST_IP" - do - echo "This is not a valid IP! Try again." - read -p "IP: " HOST_IP - done - fi - if confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " - name: $HOST_NAME" >> $FILE - echo " address: $HOST_IP" >> $FILE - echo " fqdn: $HOST_FQDN" >> $FILE - else - echo "Not confirmed" - fi - return 0 -} - -generate_dns_entry() { - FILE=$1 - PROMPT=$2 - read -p "${PROMPT}:" DNS_IP - if [ -z "$DNS_IP" ]; then - return 1 - else - while ! ip_valid "$DNS_IP" - do - echo "This is not a valid IP! Try again." - read -p "${PROMPT}: " DNS_IP - done - fi - if confirm_yes "Are you sure you want to add this entry (y/n): "; then - echo "Confirmed" - echo " - $DNS_IP" >> $FILE - else - echo "Not confirmed" - fi - return 0 -} - -confirm_yes() { - prompt=$1 - while true - do - read -p "$prompt" YESNO - case $YESNO in - [Yy]) - return 0 - ;; - [Nn]) - return 1 - ;; - esac - done -} - -generate_yaml_fragment() { - ENV=$1 - FRAGMENT=${CONFIGDIR}/fragment.yaml.$ENV - - if [ -f $FRAGMENT ]; then - echo "Manual configuration already performed, reusing previous data from $FRAGMENT." - echo "Press return to continue or ^C to stop." - read ans - return - fi - - echo "opnfv:" > ${FRAGMENT} - - clear - echo -e "\n\nPre-deployment configuration\n\n" - - echo -e "\n\nIPs for the DNS servers to go into /etc/resolv.conf. You will be" - echo -e "prompted for one IP at the time. Press return on an empty line" - echo -e "to complete your input. If no DNS server is specified, the IP of" - echo -e "the Fuel master will be used instead.\n" - - DNSCICYAML=${CONFIGDIR}/cicdns.yaml.$ENV - rm -f $DNSCICYAML - - echo -e "\n\n" - - while generate_dns_entry $DNSCICYAML "IP for CIC name servers" - do - : - done - - if [ -f $DNSCICYAML ]; then - echo " dns:" >> $FRAGMENT - echo " controller:" >> $FRAGMENT - cat $DNSCICYAML >> $FRAGMENT - fi - - - DNSCMPYAML=${CONFIGDIR}/cmpdns.yaml.$ENV - rm -f $DNSCMPYAML - - echo -e "\n\n" - - while generate_dns_entry $DNSCMPYAML "IP for compute node name servers" - do - : - done - - - if [ -f $DNSCMPYAML ]; then - if [ ! -f $DNSCICYAML ]; then - echo " dns:" >> $FRAGMENT - fi - echo " compute:" >> $FRAGMENT - cat $DNSCMPYAML >> $FRAGMENT - fi - - echo -e "\n\nHosts file additions for controllers and compute nodes. You will be" - echo -e "prompted for name, FQDN and IP for each entry. Press return when prompted" - echo -e "for a name when you have completed your input.\n" - - - HOSTYAML=${CONFIGDIR}/hosts.yaml.$ENV - rm -f $HOSTYAML - while generate_hostfile_entry $HOSTYAML - do - : - done - - if [ -f $HOSTYAML ]; then - echo " hosts:" >> $FRAGMENT - cat $HOSTYAML >> $FRAGMENT - fi - - echo -e "\n\nNTP upstream configuration for controllers.You will be" - echo -e "prompted for a NTP server each entry. Press return when prompted" - echo -e "for a NTP serverwhen you have completed your input.\n" - - - NTPYAML=${CONFIGDIR}/ntp.yaml.$ENV - rm -f $NTPYAML - while generate_ntp_entry $NTPYAML - do - : - done - - if [ -f $NTPYAML ]; then - echo " ntp:" >> $FRAGMENT - echo " controller: |" >> $FRAGMENT - cat $NTPYAML >> $FRAGMENT - - echo " compute: |" >> $FRAGMENT - for ctl in `find $CONFIGDIR/deployment_$ENV -name '*controller*.yaml'` - do - fqdn=`grep "^fqdn:" $ctl | sed 's/fqdn: *//'` - echo " server $fqdn" >> $FRAGMENT - done - fi - - # If nothing added make sure we get an empty opnfv hash - # instead of a NULL hash. - if [ $(wc -l $FRAGMENT | awk '{print $1}') -le 1 ]; then - echo "opnfv: {}" >$FRAGMENT - fi -} - -ENV=$(get_env "$@") - -CONFIGDIR="/var/lib/opnfv" -mkdir -p $CONFIGDIR - -get_deployment_info $ENV -# Uncomment the below to enable the control_bond example -#transform_yaml $ENV -get_provisioning_info $ENV -generate_yaml_fragment $ENV -# The feature to change hostnames from node-<n> to cmp- or cic- is disabled. -# To turn it on, uncomment the following line. -#setup_hostnames $ENV -add_yaml_fragment $ENV -commit_changes $ENV diff --git a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh b/fuel/build/f_isoroot/f_predeployment/sysinfo.sh deleted file mode 100755 index e99cac039..000000000 --- a/fuel/build/f_isoroot/f_predeployment/sysinfo.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -dockerctl shell cobbler cobbler system list | grep -v default | xargs -n 1 host | sort | sed 's/\..* /\t/' diff --git a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py b/fuel/build/f_isoroot/f_predeployment/transform_yaml.py deleted file mode 100755 index 14eec4cc6..000000000 --- a/fuel/build/f_isoroot/f_predeployment/transform_yaml.py +++ /dev/null @@ -1,68 +0,0 @@ -#!/usr/bin/python -############################################################################## -# Copyright (c) 2015 Ericsson AB and others. -# stefan.k.berg@ericsson.com -# jonas.bjurel@ericsson.com -# All rights reserved. This program and the accompanying materials -# are made available under the terms of the Apache License, Version 2.0 -# which accompanies this distribution, and is available at -# http://www.apache.org/licenses/LICENSE-2.0 -############################################################################## - -# Remove control and management network transformations from file. -# Only to be used together with f_control_bond_example (enable in -# pre-deploy.sh) - -import yaml -import re -import sys -import os - -if len(sys.argv) != 2: - sys.stderr.write("Usage: "+sys.argv[0]+" <filename>\n") - sys.exit(1) - -filename = sys.argv[1] -if not os.path.exists(filename): - sys.stderr.write("ERROR: The file "+filename+" could not be opened\n") - sys.exit(1) - -ignore_values = [ "eth0", "eth1", "br-mgmt", "br-fw-admin" ] - -infile = open(filename, 'r') -doc = yaml.load(infile) -infile.close() - -out={} - -for scheme in doc: - if scheme == "network_scheme": - mytransformation = {} - for operation in doc[scheme]: - if operation == "transformations": - # We need the base bridges for l23network to be happy, - # remove everything else. - mytrans = [ { "action": "add-br", "name": "br-mgmt" }, - { "action": "add-br", "name": "br-fw-admin" } ] - for trans in doc[scheme][operation]: - delete = 0 - for ignore in ignore_values: - matchObj = re.search(ignore,str(trans)) - if matchObj: - delete = 1 - if delete == 0: - mytrans.append(trans) - else: - pass - #print "Deleted", trans - - mytransformation[operation] = mytrans - else: - mytransformation[operation] = doc[scheme][operation] - out[scheme] = mytransformation - else: - out[scheme] = doc[scheme] - -outfile = open(filename, 'w') -outfile.write(yaml.dump(out, default_flow_style=False)) -outfile.close() |