aboutsummaryrefslogtreecommitdiffstats
path: root/docs/release/installation
diff options
context:
space:
mode:
Diffstat (limited to 'docs/release/installation')
-rw-r--r--docs/release/installation/img/README.rst14
-rw-r--r--docs/release/installation/img/arm_pod5.pngbin178079 -> 0 bytes
-rw-r--r--docs/release/installation/img/fuel_baremetal.pngbin272115 -> 0 bytes
-rw-r--r--docs/release/installation/img/fuel_baremetal_ha.pngbin0 -> 289121 bytes
-rw-r--r--docs/release/installation/img/fuel_baremetal_noha.pngbin0 -> 197550 bytes
-rw-r--r--docs/release/installation/img/fuel_hybrid_noha.pngbin0 -> 191144 bytes
-rw-r--r--docs/release/installation/img/fuel_virtual.pngbin216442 -> 0 bytes
-rw-r--r--docs/release/installation/img/fuel_virtual_noha.pngbin0 -> 236222 bytes
-rw-r--r--docs/release/installation/img/lf_pod2.pngbin178795 -> 0 bytes
-rw-r--r--docs/release/installation/index.rst16
-rw-r--r--docs/release/installation/installation.instruction.rst1634
11 files changed, 1207 insertions, 457 deletions
diff --git a/docs/release/installation/img/README.rst b/docs/release/installation/img/README.rst
index 4cb1f77d2..bf630445b 100644
--- a/docs/release/installation/img/README.rst
+++ b/docs/release/installation/img/README.rst
@@ -1,12 +1,18 @@
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. SPDX-License-Identifier: CC-BY-4.0
-.. (c) 2017 Ericsson AB, Mirantis Inc., Enea AB and others.
+.. (c) 2018 Ericsson AB, Mirantis Inc., Enea AB and others.
+
+:orphan:
Image Editor
============
-All files in this directory have been created using `draw.io <https://draw.io>`_.
+
+All files in this directory have been created using `draw.io`_.
Image Sources
=============
-Image sources are embedded in each `png` file.
-To edit an image, import the `png` file using `draw.io <https://draw.io>`_.
+
+Image sources are embedded in each ``png`` file.
+To edit an image, import the ``png`` file using `draw.io`_.
+
+.. _`draw.io`: https://draw.io
diff --git a/docs/release/installation/img/arm_pod5.png b/docs/release/installation/img/arm_pod5.png
deleted file mode 100644
index 87edb8f45..000000000
--- a/docs/release/installation/img/arm_pod5.png
+++ /dev/null
Binary files differ
diff --git a/docs/release/installation/img/fuel_baremetal.png b/docs/release/installation/img/fuel_baremetal.png
deleted file mode 100644
index 27e762021..000000000
--- a/docs/release/installation/img/fuel_baremetal.png
+++ /dev/null
Binary files differ
diff --git a/docs/release/installation/img/fuel_baremetal_ha.png b/docs/release/installation/img/fuel_baremetal_ha.png
new file mode 100644
index 000000000..f2ed6106f
--- /dev/null
+++ b/docs/release/installation/img/fuel_baremetal_ha.png
Binary files differ
diff --git a/docs/release/installation/img/fuel_baremetal_noha.png b/docs/release/installation/img/fuel_baremetal_noha.png
new file mode 100644
index 000000000..5a3b42919
--- /dev/null
+++ b/docs/release/installation/img/fuel_baremetal_noha.png
Binary files differ
diff --git a/docs/release/installation/img/fuel_hybrid_noha.png b/docs/release/installation/img/fuel_hybrid_noha.png
new file mode 100644
index 000000000..51449a777
--- /dev/null
+++ b/docs/release/installation/img/fuel_hybrid_noha.png
Binary files differ
diff --git a/docs/release/installation/img/fuel_virtual.png b/docs/release/installation/img/fuel_virtual.png
deleted file mode 100644
index d7664865d..000000000
--- a/docs/release/installation/img/fuel_virtual.png
+++ /dev/null
Binary files differ
diff --git a/docs/release/installation/img/fuel_virtual_noha.png b/docs/release/installation/img/fuel_virtual_noha.png
new file mode 100644
index 000000000..7d05a9dcd
--- /dev/null
+++ b/docs/release/installation/img/fuel_virtual_noha.png
Binary files differ
diff --git a/docs/release/installation/img/lf_pod2.png b/docs/release/installation/img/lf_pod2.png
deleted file mode 100644
index da419d87c..000000000
--- a/docs/release/installation/img/lf_pod2.png
+++ /dev/null
Binary files differ
diff --git a/docs/release/installation/index.rst b/docs/release/installation/index.rst
index 00332262f..866044eb5 100644
--- a/docs/release/installation/index.rst
+++ b/docs/release/installation/index.rst
@@ -1,24 +1,10 @@
-.. _fuel-installation:
-
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) Open Platform for NFV Project, Inc. and its contributors
-.. _fuel-release-installation-label:
-
-****************************************
-Installation instruction for Fuel\@OPNFV
-****************************************
-
-Contents:
+.. _fuel-installation:
.. toctree::
- :numbered:
:maxdepth: 2
installation.instruction.rst
-
-Indices and tables
-==================
-
-* :ref:`search`
diff --git a/docs/release/installation/installation.instruction.rst b/docs/release/installation/installation.instruction.rst
index 9aaebdd7c..40f9d26ae 100644
--- a/docs/release/installation/installation.instruction.rst
+++ b/docs/release/installation/installation.instruction.rst
@@ -2,637 +2,1395 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) Open Platform for NFV Project, Inc. and its contributors
-========
+***********************************
+OPNFV Fuel Installation Instruction
+***********************************
+
Abstract
========
-This document describes how to install the Fraser release of
+This document describes how to install the ``Gambia`` release of
OPNFV when using Fuel as a deployment tool, covering its usage,
limitations, dependencies and required system resources.
-This is an unified documentation for both x86_64 and aarch64
+
+This is an unified documentation for both ``x86_64`` and ``aarch64``
architectures. All information is common for both architectures
except when explicitly stated.
-============
Introduction
============
This document provides guidelines on how to install and
-configure the Fraser release of OPNFV when using Fuel as a
+configure the ``Gambia`` release of OPNFV when using Fuel as a
deployment tool, including required software and hardware configurations.
Although the available installation options provide a high degree of
freedom in how the system is set up, including architecture, services
and features, etc., said permutations may not provide an OPNFV
compliant reference architecture. This document provides a
-step-by-step guide that results in an OPNFV Fraser compliant
+step-by-step guide that results in an OPNFV ``Gambia`` compliant
deployment.
The audience of this document is assumed to have good knowledge of
networking and Unix/Linux administration.
-=======
-Preface
-=======
-
-Before starting the installation of the Fraser release of
+Before starting the installation of the ``Gambia`` release of
OPNFV, using Fuel as a deployment tool, some planning must be
done.
Preparations
============
-Prior to installation, a number of deployment specific parameters must be collected, those are:
+Prior to installation, a number of deployment specific parameters must be
+collected, those are:
#. Provider sub-net and gateway information
-#. Provider VLAN information
-
-#. Provider DNS addresses
+#. Provider ``VLAN`` information
-#. Provider NTP addresses
+#. Provider ``DNS`` addresses
-#. Network overlay you plan to deploy (VLAN, VXLAN, FLAT)
-
-#. How many nodes and what roles you want to deploy (Controllers, Storage, Computes)
-
-#. Monitoring options you want to deploy (Ceilometer, Syslog, etc.).
-
-#. Other options not covered in the document are available in the links above
+#. Provider ``NTP`` addresses
+#. How many nodes and what roles you want to deploy (Controllers, Computes)
This information will be needed for the configuration procedures
provided in this document.
-=========================================
-Hardware Requirements for Virtual Deploys
-=========================================
-
-The following minimum hardware requirements must be met for the virtual
-installation of Fraser using Fuel:
-
-+----------------------------+--------------------------------------------------------+
-| **HW Aspect** | **Requirement** |
-| | |
-+============================+========================================================+
-| **1 Jumpserver** | A physical node (also called Foundation Node) that |
-| | will host a Salt Master VM and each of the VM nodes in |
-| | the virtual deploy |
-+----------------------------+--------------------------------------------------------+
-| **CPU** | Minimum 1 socket with Virtualization support |
-+----------------------------+--------------------------------------------------------+
-| **RAM** | Minimum 32GB/server (Depending on VNF work load) |
-+----------------------------+--------------------------------------------------------+
-| **Disk** | Minimum 100GB (SSD or SCSI (15krpm) highly recommended)|
-+----------------------------+--------------------------------------------------------+
-
-
-===========================================
-Hardware Requirements for Baremetal Deploys
-===========================================
-
-The following minimum hardware requirements must be met for the baremetal
-installation of Fraser using Fuel:
-
-+-------------------------+------------------------------------------------------+
-| **HW Aspect** | **Requirement** |
-| | |
-+=========================+======================================================+
-| **# of nodes** | Minimum 5 |
-| | |
-| | - 3 KVM servers which will run all the controller |
-| | services |
-| | |
-| | - 2 Compute nodes |
-| | |
-+-------------------------+------------------------------------------------------+
-| **CPU** | Minimum 1 socket with Virtualization support |
-+-------------------------+------------------------------------------------------+
-| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
-+-------------------------+------------------------------------------------------+
-| **Disk** | Minimum 256GB 10kRPM spinning disks |
-+-------------------------+------------------------------------------------------+
-| **Networks** | 4 VLANs (PUBLIC, MGMT, STORAGE, PRIVATE) - can be |
-| | a mix of tagged/native |
-| | |
-| | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network |
-| | |
-| | Note: These can be allocated to a single NIC - |
-| | or spread out over multiple NICs |
-+-------------------------+------------------------------------------------------+
-| **1 Jumpserver** | A physical node (also called Foundation Node) that |
-| | hosts the Salt Master and MaaS VMs |
-+-------------------------+------------------------------------------------------+
-| **Power management** | All targets need to have power management tools that |
-| | allow rebooting the hardware and setting the boot |
-| | order (e.g. IPMI) |
-+-------------------------+------------------------------------------------------+
+Hardware Requirements
+=====================
-.. NOTE::
-
- All nodes including the Jumpserver must have the same architecture (either x86_64 or aarch64).
+Mininum hardware requirements depend on the deployment type.
-.. NOTE::
+.. WARNING::
- For aarch64 deployments an UEFI compatible firmware with PXE support is needed (e.g. EDK2).
+ If ``baremetal`` nodes are present in the cluster, the architecture of the
+ nodes running the control plane (``kvm01``, ``kvm02``, ``kvm03`` for
+ ``HA`` scenarios, respectively ``ctl01``, ``gtw01``, ``odl01`` for
+ ``noHA`` scenarios) and the ``jumpserver`` architecture must be the same
+ (either ``x86_64`` or ``aarch64``).
+
+.. TIP::
+
+ The compute nodes may have different architectures, but extra
+ configuration might be required for scheduling VMs on the appropiate host.
+ This use-case is not tested in OPNFV CI, so it is considered experimental.
+
+Hardware Requirements for ``virtual`` Deploys
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following minimum hardware requirements must be met for the ``virtual``
+installation of ``Gambia`` using Fuel:
+
++------------------+------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++==================+======================================================+
+| **1 Jumpserver** | A physical node (also called Foundation Node) that |
+| | will host a Salt Master container and each of the VM |
+| | nodes in the virtual deploy |
++------------------+------------------------------------------------------+
+| **CPU** | Minimum 1 socket with Virtualization support |
++------------------+------------------------------------------------------+
+| **RAM** | Minimum 32GB/server (Depending on VNF work load) |
++------------------+------------------------------------------------------+
+| **Disk** | Minimum 100GB (SSD or 15krpm SCSI highly recommended)|
++------------------+------------------------------------------------------+
+
+Hardware Requirements for ``baremetal`` Deploys
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following minimum hardware requirements must be met for the ``baremetal``
+installation of ``Gambia`` using Fuel:
+
++------------------+------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++==================+======================================================+
+| **1 Jumpserver** | A physical node (also called Foundation Node) that |
+| | hosts the Salt Master container and MaaS VM |
++------------------+------------------------------------------------------+
+| **# of nodes** | Minimum 5 |
+| | |
+| | - 3 KVM servers which will run all the controller |
+| | services |
+| | |
+| | - 2 Compute nodes |
+| | |
+| | .. WARNING:: |
+| | |
+| | ``kvm01``, ``kvm02``, ``kvm03`` nodes and the |
+| | ``jumpserver`` must have the same architecture |
+| | (either ``x86_64`` or ``aarch64``). |
+| | |
+| | .. NOTE:: |
+| | |
+| | ``aarch64`` nodes should run an ``UEFI`` |
+| | compatible firmware with PXE support |
+| | (e.g. ``EDK2``). |
++------------------+------------------------------------------------------+
+| **CPU** | Minimum 1 socket with Virtualization support |
++------------------+------------------------------------------------------+
+| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
++------------------+------------------------------------------------------+
+| **Disk** | Minimum 256GB 10kRPM spinning disks |
++------------------+------------------------------------------------------+
+| **Networks** | Mininum 4 |
+| | |
+| | - 3 VLANs (``public``, ``mgmt``, ``private``) - |
+| | can be a mix of tagged/native |
+| | |
+| | - 1 Un-Tagged VLAN for PXE Boot - |
+| | ``PXE/admin`` Network |
+| | |
+| | .. NOTE:: |
+| | |
+| | These can be allocated to a single NIC |
+| | or spread out over multiple NICs. |
++------------------+------------------------------------------------------+
+| **Power mgmt** | All targets need to have power management tools that |
+| | allow rebooting the hardware (e.g. ``IPMI``). |
++------------------+------------------------------------------------------+
+
+Hardware Requirements for ``hybrid`` (``baremetal`` + ``virtual``) Deploys
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following minimum hardware requirements must be met for the ``hybrid``
+installation of ``Gambia`` using Fuel:
+
++------------------+------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++==================+======================================================+
+| **1 Jumpserver** | A physical node (also called Foundation Node) that |
+| | hosts the Salt Master container, MaaS VM and |
+| | each of the virtual nodes defined in ``PDF`` |
++------------------+------------------------------------------------------+
+| **# of nodes** | .. NOTE:: |
+| | |
+| | Depends on ``PDF`` configuration. |
+| | |
+| | If the control plane is virtualized, minimum |
+| | baremetal requirements are: |
+| | |
+| | - 2 Compute nodes |
+| | |
+| | If the computes are virtualized, minimum |
+| | baremetal requirements are: |
+| | |
+| | - 3 KVM servers which will run all the controller |
+| | services |
+| | |
+| | .. WARNING:: |
+| | |
+| | ``kvm01``, ``kvm02``, ``kvm03`` nodes and the |
+| | ``jumpserver`` must have the same architecture |
+| | (either ``x86_64`` or ``aarch64``). |
+| | |
+| | .. NOTE:: |
+| | |
+| | ``aarch64`` nodes should run an ``UEFI`` |
+| | compatible firmware with PXE support |
+| | (e.g. ``EDK2``). |
++------------------+------------------------------------------------------+
+| **CPU** | Minimum 1 socket with Virtualization support |
++------------------+------------------------------------------------------+
+| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
++------------------+------------------------------------------------------+
+| **Disk** | Minimum 256GB 10kRPM spinning disks |
++------------------+------------------------------------------------------+
+| **Networks** | Same as for ``baremetal`` deployments |
++------------------+------------------------------------------------------+
+| **Power mgmt** | Same as for ``baremetal`` deployments |
++------------------+------------------------------------------------------+
-===============================
Help with Hardware Requirements
-===============================
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Calculate hardware requirements:
-For information on compatible hardware types available for use,
-please see `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/software/hardware-compatibility/>`_
-
When choosing the hardware on which you will deploy your OpenStack
environment, you should think about:
-- CPU -- Consider the number of virtual machines that you plan to deploy in your cloud environment and the CPUs per virtual machine.
+- CPU -- Consider the number of virtual machines that you plan to deploy in
+ your cloud environment and the CPUs per virtual machine.
-- Memory -- Depends on the amount of RAM assigned per virtual machine and the controller node.
+- Memory -- Depends on the amount of RAM assigned per virtual machine and the
+ controller node.
-- Storage -- Depends on the local drive space per virtual machine, remote volumes that can be attached to a virtual machine, and object storage.
+- Storage -- Depends on the local drive space per virtual machine, remote
+ volumes that can be attached to a virtual machine, and object storage.
-- Networking -- Depends on the Choose Network Topology, the network bandwidth per virtual machine, and network storage.
+- Networking -- Depends on the Choose Network Topology, the network bandwidth
+ per virtual machine, and network storage.
-================================================
-Top of the Rack (TOR) Configuration Requirements
-================================================
+Top of the Rack (``TOR``) Configuration Requirements
+====================================================
The switching infrastructure provides connectivity for the OPNFV
infrastructure operations, tenant networks (East/West) and provider
connectivity (North/South); it also provides needed connectivity for
the Storage Area Network (SAN).
+
To avoid traffic congestion, it is strongly suggested that three
physically separated networks are used, that is: 1 physical network
for administration and control, one physical network for tenant private
and public networks, and one physical network for SAN.
+
The switching connectivity can (but does not need to) be fully redundant,
in such case it comprises a redundant 10GE switch pair for each of the
three physically separated networks.
-The physical TOR switches are **not** automatically configured from
-the Fuel OPNFV reference platform. All the networks involved in the OPNFV
-infrastructure as well as the provider networks and the private tenant
-VLANs needs to be manually configured.
+.. WARNING::
-Manual configuration of the Fraser hardware platform should
-be carried out according to the `OPNFV Pharos Specification
-<https://wiki.opnfv.org/display/pharos/Pharos+Specification>`_.
+ The physical ``TOR`` switches are **not** automatically configured from
+ the OPNFV Fuel reference platform. All the networks involved in the OPNFV
+ infrastructure as well as the provider networks and the private tenant
+ VLANs needs to be manually configured.
+
+Manual configuration of the ``Gambia`` hardware platform should
+be carried out according to the `OPNFV Pharos Specification`_.
-============================
OPNFV Software Prerequisites
============================
-The Jumpserver node should be pre-provisioned with an operating system,
-according to the Pharos specification. Relevant network bridges should
-also be pre-configured (e.g. admin_br, mgmt_br, public_br).
+.. NOTE::
-- The admin bridge (admin_br) is mandatory for the baremetal nodes PXE booting during Fuel installation.
-- The management bridge (mgmt_br) is required for testing suites (e.g. functest/yardstick), it is
- suggested to pre-configure it for debugging purposes.
-- The public bridge (public_br) is also nice to have for debugging purposes, but not mandatory.
+ All prerequisites described in this chapter apply to the ``jumpserver``
+ node.
-The user running the deploy script on the Jumpserver should belong to ``sudo`` and ``libvirt`` groups,
-and have passwordless sudo access.
+OS Distribution Support
+~~~~~~~~~~~~~~~~~~~~~~~
-The following example adds the groups to the user ``jenkins``
+The Jumpserver node should be pre-provisioned with an operating system,
+according to the `OPNFV Pharos specification`_.
-.. code-block:: bash
+OPNFV Fuel has been validated by CI using the following distributions
+installed on the Jumpserver:
- $ sudo usermod -aG sudo jenkins
- $ sudo usermod -aG libvirt jenkins
- $ reboot
- $ groups
- jenkins sudo libvirt
+- ``CentOS 7`` (recommended by Pharos specification);
+- ``Ubuntu Xenial 16.04``;
- $ sudo visudo
- ...
- %jenkins ALL=(ALL) NOPASSWD:ALL
+.. TOPIC:: ``aarch64`` notes
-The folder containing the temporary deploy artifacts (``/home/jenkins/tmpdir`` in the examples below)
-needs to have mask 777 in order for libvirt to be able to use them.
+ For an ``aarch64`` Jumpserver, the ``libvirt`` minimum required
+ version is ``3.x``, ``3.5`` or newer highly recommended.
-.. code-block:: bash
+ .. TIP::
- $ mkdir -p -m 777 /home/jenkins/tmpdir
+ ``CentOS 7`` (``aarch64``) distro provided packages are already new
+ enough.
-For an AArch64 Jumpserver, the ``libvirt`` minimum required version is 3.x, 3.5 or newer highly recommended.
-While not mandatory, upgrading the kernel and QEMU on the Jumpserver is also highly recommended
-(especially on AArch64 Jumpservers).
+ .. WARNING::
-For CentOS 7.4 (AArch64), distro provided packages are already new enough.
-For Ubuntu 16.04 (arm64), distro packages are too old and 3rd party repositories should be used.
-For convenience, Armband provides a DEB repository holding all the required packages.
+ ``Ubuntu 16.04`` (``arm64``), distro packages are too old and 3rd party
+ repositories should be used.
-To add and enable the Armband repository on an Ubuntu 16.04 system,
-create a new sources list file ``/apt/sources.list.d/armband.list`` with the following contents:
+ For convenience, Armband provides a DEB repository holding all the
+ required packages.
-.. code-block:: bash
+ To add and enable the Armband repository on an Ubuntu 16.04 system,
+ create a new sources list file ``/apt/sources.list.d/armband.list``
+ with the following contents:
- $ cat /etc/apt/sources.list.d/armband.list
- //for OpenStack Queens release
- deb http://linux.enea.com/mcp-repos/queens/xenial queens-armband main
+ .. code-block:: console
- $ apt-get update
+ jenkins@jumpserver:~$ cat /etc/apt/sources.list.d/armband.list
+ deb http://linux.enea.com/mcp-repos/queens/xenial queens-armband main
-Fuel@OPNFV has been validated by CI using the following distributions
-installed on the Jumpserver:
+ jenkins@jumpserver:~$ sudo apt-key adv --keyserver keys.gnupg.net \
+ --recv 798AB1D1
+ jenkins@jumpserver:~$ sudo apt-get update
-- CentOS 7 (recommended by Pharos specification);
-- Ubuntu Xenial;
+OS Distribution Packages
+~~~~~~~~~~~~~~~~~~~~~~~~
-.. WARNING::
+By default, the ``deploy.sh`` script will automatically install the required
+distribution package dependencies on the Jumpserver, so the end user does
+not have to manually install them before starting the deployment.
- The install script expects ``libvirt`` to be already running on the Jumpserver.
- In case ``libvirt`` packages are missing, the script will install them; but
- depending on the OS distribution, the user might have to start the ``libvirtd``
- service manually, then run the deploy script again. Therefore, it
- is recommended to install libvirt-bin explicitly on the Jumpserver before the deployment.
+This includes Python, QEMU, libvirt etc.
-.. NOTE::
+.. SEEALSO::
- It is also recommended to install the newer kernel on the Jumpserver before the deployment.
+ To disable automatic package installation (and/or upgrade) during
+ deployment, check out the ``-P`` deploy argument.
.. WARNING::
- The install script will automatically install the rest of required distro package
- dependencies on the Jumpserver, unless explicitly asked not to (via ``-P`` deploy arg).
- This includes Python, QEMU, libvirt etc.
+ The install script expects ``libvirt`` to be already running on the
+ Jumpserver.
-.. WARNING::
+In case ``libvirt`` packages are missing, the script will install them; but
+depending on the OS distribution, the user might have to start the
+``libvirt`` daemon service manually, then run the deploy script again.
- The install script will alter Jumpserver sysconf and disable ``net.bridge.bridge-nf-call``.
+Therefore, it is recommended to install ``libvirt`` explicitly on the
+Jumpserver before the deployment.
-.. code-block:: bash
+While not mandatory, upgrading the kernel on the Jumpserver is also highly
+recommended.
- $ apt-get install linux-image-generic-hwe-16.04-edge libvirt-bin
+.. code-block:: console
+ jenkins@jumpserver:~$ sudo apt-get install \
+ linux-image-generic-hwe-16.04-edge libvirt-bin
+ jenkins@jumpserver:~$ sudo reboot
-==========================================
-OPNFV Software Installation and Deployment
-==========================================
+User Requirements
+~~~~~~~~~~~~~~~~~
-This section describes the process of installing all the components needed to
-deploy the full OPNFV reference platform stack across a server cluster.
+The user running the deploy script on the Jumpserver should belong to
+``sudo`` and ``libvirt`` groups, and have passwordless sudo access.
-The installation is done with Mirantis Cloud Platform (MCP), which is based on
-a reclass model. This model provides the formula inputs to Salt, to make the deploy
-automatic based on deployment scenario.
-The reclass model covers:
+.. NOTE::
- - Infrastructure node definition: Salt Master node (cfg01) and MaaS node (mas01)
- - OpenStack node definition: Controller nodes (ctl01, ctl02, ctl03) and Compute nodes (cmp001, cmp002)
- - Infrastructure components to install (software packages, services etc.)
- - OpenStack components and services (rabbitmq, galera etc.), as well as all configuration for them
+ Throughout this documentation, we will use the ``jenkins`` username for
+ this role.
+The following example adds the groups to the user ``jenkins``:
-Automatic Installation of a Virtual POD
-=======================================
+.. code-block:: console
-For virtual deploys all the targets are VMs on the Jumpserver. The deploy script will:
+ jenkins@jumpserver:~$ sudo usermod -aG sudo jenkins
+ jenkins@jumpserver:~$ sudo usermod -aG libvirt jenkins
+ jenkins@jumpserver:~$ sudo reboot
+ jenkins@jumpserver:~$ groups
+ jenkins sudo libvirt
- - Create a Salt Master VM on the Jumpserver which will drive the installation
- - Create the bridges for networking with virsh (only if a real bridge does not already exist for a given network)
- - Install OpenStack on the targets
- - Leverage Salt to install & configure OpenStack services
+ jenkins@jumpserver:~$ sudo visudo
+ ...
+ %jenkins ALL=(ALL) NOPASSWD:ALL
-.. figure:: img/fuel_virtual.png
- :align: center
- :alt: Fuel@OPNFV Virtual POD Network Layout Examples
+Local Artifact Storage
+~~~~~~~~~~~~~~~~~~~~~~
+
+The folder containing the temporary deploy artifacts (``/home/jenkins/tmpdir``
+in the examples below) needs to have mask ``777`` in order for ``libvirt`` to
+be able to use them.
+
+.. code-block:: console
+
+ jenkins@jumpserver:~$ mkdir -p -m 777 /home/jenkins/tmpdir
+
+Network Configuration
+~~~~~~~~~~~~~~~~~~~~~
+
+Relevant Linux bridges should also be pre-configured for certain networks,
+depending on the type of the deployment.
+
++------------+---------------+----------------------------------------------+
+| Network | Linux Bridge | Linux Bridge necessity based on deploy type |
+| | +--------------+---------------+---------------+
+| | | ``virtual`` | ``baremetal`` | ``hybrid`` |
++============+===============+==============+===============+===============+
+| PXE/admin | ``admin_br`` | absent | present | present |
++------------+---------------+--------------+---------------+---------------+
+| management | ``mgmt_br`` | optional | optional, | optional, |
+| | | | recommended, | recommended, |
+| | | | required for | required for |
+| | | | ``functest``, | ``functest``, |
+| | | | ``yardstick`` | ``yardstick`` |
++------------+---------------+--------------+---------------+---------------+
+| internal | ``int_br`` | optional | optional | present |
++------------+---------------+--------------+---------------+---------------+
+| public | ``public_br`` | optional | optional, | optional, |
+| | | | recommended, | recommended, |
+| | | | useful for | useful for |
+| | | | debugging | debugging |
++------------+---------------+--------------+---------------+---------------+
+
+.. TIP::
+
+ IP addresses should be assigned to the created bridge interfaces (not
+ to one of its ports).
- Fuel@OPNFV Virtual POD Network Layout Examples
+.. WARNING::
- +-----------------------+------------------------------------------------------------------------+
- | cfg01 | Salt Master VM |
- +-----------------------+------------------------------------------------------------------------+
- | ctl01 | Controller VM |
- +-----------------------+------------------------------------------------------------------------+
- | cmp001/cmp002 | Compute VMs |
- +-----------------------+------------------------------------------------------------------------+
- | gtw01 | Gateway VM with neutron services (dhcp agent, L3 agent, metadata, etc) |
- +-----------------------+------------------------------------------------------------------------+
- | odl01 | VM on which ODL runs (for scenarios deployed with ODL) |
- +-----------------------+------------------------------------------------------------------------+
+ ``PXE/admin`` bridge (``admin_br``) **must** have an IP address.
+Changes ``deploy.sh`` Will Perform to Jumpserver OS
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-In this figure there are examples of two virtual deploys:
- - Jumphost 1 has only virsh bridges, created by the deploy script
- - Jumphost 2 has a mix of Linux and virsh bridges; When Linux bridge exists for a specified network,
- the deploy script will skip creating a virsh bridge for it
+.. WARNING::
-.. NOTE::
+ The install script will alter Jumpserver sysconf and disable
+ ``net.bridge.bridge-nf-call``.
- A virtual network ``mcpcontrol`` is always created for initial connection of the VMs on Jumphost.
+.. WARNING::
+ The install script will automatically install and/or upgrade the
+ required distribution package dependencies on the Jumpserver,
+ unless explicitly asked not to (via the ``-P`` deploy arg).
-Automatic Installation of a Baremetal POD
-=========================================
+OPNFV Software Configuration (``XDF``)
+======================================
-The baremetal installation process can be done by editing the information about
-hardware and environment in the reclass files, or by using the files Pod Descriptor
-File (PDF) and Installer Descriptor File (IDF) as described in the OPNFV Pharos project.
-These files contain all the information about the hardware and network of the deployment
-that will be fed to the reclass model during deployment.
+.. versionadded:: 5.0.0
+.. versionchanged:: 7.0.0
-The installation is done automatically with the deploy script, which will:
+Unlike the old approach based on OpenStack Fuel, OPNFV Fuel no longer has a
+graphical user interface for configuring the environment, but instead
+switched to OPNFV specific descriptor files that we will call generically
+``XDF``:
- - Create a Salt Master VM on the Jumpserver which will drive the installation
- - Create a MaaS Node VM on the Jumpserver which will provision the targets
- - Install OpenStack on the targets
- - Leverage MaaS to provision baremetal nodes with the operating system
- - Leverage Salt to configure the operating system on the baremetal nodes
- - Leverage Salt to install & configure OpenStack services
+- ``PDF`` (POD Descriptor File) provides an abstraction of the target POD
+ with all its hardware characteristics and required parameters;
+- ``IDF`` (Installer Descriptor File) extends the ``PDF`` with POD related
+ parameters required by the OPNFV Fuel installer;
+- ``SDF`` (Scenario Descriptor File, **not** yet adopted) will later
+ replace embedded scenario definitions, describing the roles and layout of
+ the cluster enviroment for a given reference architecture;
-.. figure:: img/fuel_baremetal.png
- :align: center
- :alt: Fuel@OPNFV Baremetal POD Network Layout Example
-
- Fuel@OPNFV Baremetal POD Network Layout Example
-
- +-----------------------+---------------------------------------------------------+
- | cfg01 | Salt Master VM |
- +-----------------------+---------------------------------------------------------+
- | mas01 | MaaS Node VM |
- +-----------------------+---------------------------------------------------------+
- | kvm01..03 | Baremetals which hold the VMs with controller functions |
- +-----------------------+---------------------------------------------------------+
- | cmp001/cmp002 | Baremetal compute nodes |
- +-----------------------+---------------------------------------------------------+
- | prx01/prx02 | Proxy VMs for Nginx |
- +-----------------------+---------------------------------------------------------+
- | msg01..03 | RabbitMQ Service VMs |
- +-----------------------+---------------------------------------------------------+
- | dbs01..03 | MySQL service VMs |
- +-----------------------+---------------------------------------------------------+
- | mdb01..03 | Telemetry VMs |
- +-----------------------+---------------------------------------------------------+
- | odl01 | VM on which ODL runs (for scenarios deployed with ODL) |
- +-----------------------+---------------------------------------------------------+
- | Tenant VM | VM running in the cloud |
- +-----------------------+---------------------------------------------------------+
-
-In the baremetal deploy all bridges but "mcpcontrol" are Linux bridges. For the Jumpserver, it is
-required to pre-configure at least the admin_br bridge for the PXE/Admin.
-For the targets, the bridges are created by the deploy script.
+.. TIP::
+
+ For ``virtual`` deployments, if the ``public`` network will be accessed
+ from outside the ``jumpserver`` node, a custom ``PDF``/``IDF`` pair is
+ required for customizing ``idf.net_config.public`` and
+ ``idf.fuel.jumphost.bridges.public``.
.. NOTE::
- A virtual network ``mcpcontrol`` is always created for initial connection of the VMs on Jumphost.
+ For OPNFV CI PODs, as well as simple (no ``public`` bridge) ``virtual``
+ deployments, ``PDF``/``IDF`` files are already available in the
+ `pharos git repo`_. They can be used as a reference for user-supplied
+ inputs or to kick off a deployment right away.
++----------+------------------------------------------------------------------+
+| LAB/POD | ``PDF``/``IDF`` availability based on deploy type |
+| +------------------------+--------------------+--------------------+
+| | ``virtual`` | ``baremetal`` | ``hybrid`` |
++==========+========================+====================+====================+
+| OPNFV CI | available in | available in | N/A, as currently |
+| POD | `pharos git repo`_ | `pharos git repo`_ | there are 0 hybrid |
+| | (e.g. | (e.g. ``lf-pod2``, | PODs in OPNFV CI |
+| | ``ericsson-virtual1``) | ``arm-pod5``) | |
++----------+------------------------+--------------------+--------------------+
+| local or | ``user-supplied`` | ``user-supplied`` | ``user-supplied`` |
+| new POD | | | |
++----------+------------------------+--------------------+--------------------+
-Steps to Start the Automatic Deploy
-===================================
+.. TIP::
-These steps are common both for virtual and baremetal deploys.
+ Both ``PDF`` and ``IDF`` structure are modelled as ``yaml`` schemas in the
+ `pharos git repo`_, also included as a git submodule in OPNFV Fuel.
-#. Clone the Fuel code from gerrit
+ .. SEEALSO::
- For x86_64
+ - ``mcp/scripts/pharos/config/pdf/pod1.schema.yaml``
+ - ``mcp/scripts/pharos/config/pdf/idf-pod1.schema.yaml``
- .. code-block:: bash
+ Schema files are also used during the initial deployment phase to validate
+ the user-supplied input ``PDF``/``IDF`` files.
- $ git clone https://git.opnfv.org/fuel
- $ cd fuel
+``PDF``
+~~~~~~~
- For aarch64
+The Pod Descriptor File is a hardware description of the POD
+infrastructure. The information is modeled under a ``yaml`` structure.
- .. code-block:: bash
+The hardware description covers the ``jumphost`` node and a set of ``nodes``
+for the cluster target boards. For each node the following characteristics
+are defined:
- $ git clone https://git.opnfv.org/armband
- $ cd armband
+- Node parameters including ``CPU`` features and total memory;
+- A list of available disks;
+- Remote management parameters;
+- Network interfaces list including name, ``MAC`` address, link speed,
+ advanced features;
-#. Checkout the Fraser release
+.. SEEALSO::
- .. code-block:: bash
+ A reference file with the expected ``yaml`` structure is available at:
- $ git checkout opnfv-6.2.1
+ - ``mcp/scripts/pharos/config/pdf/pod1.yaml``
-#. Start the deploy script
+ For more information on ``PDF``, see the `OPNFV PDF Wiki Page`_.
- Besides the basic options, there are other recommended deploy arguments:
+.. WARNING::
- - use ``-D`` option to enable the debug info
- - use ``-S`` option to point to a tmp dir where the disk images are saved. The images will be
- re-used between deploys
- - use ``|& tee`` to save the deploy log to a file
+ The fixed IPs defined in ``PDF`` are ignored by the OPNFV Fuel installer
+ script and it will instead assign addresses based on the network ranges
+ defined in ``IDF``.
+
+ For more details on the way IP addresses are assigned, see
+ :ref:`OPNFV Fuel User Guide <fuel-userguide>`.
+
+``PDF``/``IDF`` Role (hostname) Mapping
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Upcoming ``SDF`` support will introduce a series of possible node roles.
+Until that happens, the role mapping logic is hardcoded, based on node index
+in ``PDF``/``IDF`` (which should also be in sync, i.e. the parameters of the
+``n``-th cluster node defined in ``PDF`` should be the ``n``-th node in
+``IDF`` structures too).
+
++-------------+------------------+----------------------+
+| Node index | ``HA`` scenario | ``noHA`` scenario |
++=============+==================+======================+
+| 1st | ``kvm01`` | ``ctl01`` |
++-------------+------------------+----------------------+
+| 2nd | ``kvm02`` | ``gtw01`` |
++-------------+------------------+----------------------+
+| 3rd | ``kvm03`` | ``odl01``/``unused`` |
++-------------+------------------+----------------------+
+| 4th, | ``cmp001``, | ``cmp001``, |
+| 5th, | ``cmp002``, | ``cmp002``, |
+| ... | ``...`` | ``...`` |
++-------------+------------------+----------------------+
+
+.. TIP::
+
+ To switch node role(s), simply reorder the node definitions in
+ ``PDF``/``IDF`` (make sure to keep them in sync).
+
+``IDF``
+~~~~~~~
+
+The Installer Descriptor File extends the ``PDF`` with POD related parameters
+required by the installer. This information may differ per each installer type
+and it is not considered part of the POD infrastructure.
+
+``idf.*`` Overview
+------------------
+
+The ``IDF`` file must be named after the ``PDF`` it attaches to, with the
+prefix ``idf-``.
+
+.. SEEALSO::
+
+ A reference file with the expected ``yaml`` structure is available at:
+
+ - ``mcp/scripts/pharos/config/pdf/idf-pod1.yaml``
+
+The file follows a ``yaml`` structure and at least two sections
+(``idf.net_config`` and ``idf.fuel``) are expected.
+
+The ``idf.fuel`` section defines several sub-sections required by the OPNFV
+Fuel installer:
+
+- ``jumphost``: List of bridge names for each network on the Jumpserver;
+- ``network``: List of device name and bus address info of all the target nodes.
+ The order must be aligned with the order defined in the ``PDF`` file.
+ The OPNFV Fuel installer relies on the ``IDF`` model to setup all node NICs
+ by defining the expected device name and bus address;
+- ``maas``: Defines the target nodes commission timeout and deploy timeout;
+- ``reclass``: Defines compute parameter tuning, including huge pages, ``CPU``
+ pinning and other ``DPDK`` settings;
+
+.. code-block:: yaml
+
+ ---
+ idf:
+ version: 0.1 # fixed, the only supported version (mandatory)
+ net_config: # POD network configuration overview (mandatory)
+ oob: ... # mandatory
+ admin: ... # mandatory
+ mgmt: ... # mandatory
+ storage: ... # mandatory
+ private: ... # mandatory
+ public: ... # mandatory
+ fuel: # OPNFV Fuel specific section (mandatory)
+ jumphost: # OPNFV Fuel jumpserver bridge configuration (mandatory)
+ bridges: # Bridge name mapping (mandatory)
+ admin: 'admin_br' # <PXE/admin bridge name> or ~
+ mgmt: 'mgmt_br' # <mgmt bridge name> or ~
+ private: ~ # <private bridge name> or ~
+ public: 'public_br' # <public bridge name> or ~
+ trunks: ... # Trunked networks (optional)
+ maas: # MaaS timeouts (optional)
+ timeout_comissioning: 10 # commissioning timeout in minutes
+ timeout_deploying: 15 # deploy timeout in minutes
+ network: # Cluster nodes network (mandatory)
+ ntp_strata_host1: 1.pool.ntp.org # NTP1 (optional)
+ ntp_strata_host2: 0.pool.ntp.org # NTP2 (optional)
+ node: ... # List of per-node cfg (mandatory)
+ reclass: # Additional params (mandatory)
+ node: ... # List of per-node cfg (mandatory)
+
+``idf.net_config``
+------------------
+
+``idf.net_config`` was introduced as a mechanism to map all the usual cluster
+networks (internal and provider networks, e.g. ``mgmt``) to their ``VLAN``
+tags, ``CIDR`` and a physical interface index (used to match networks to
+interface names, like ``eth0``, on the cluster nodes).
- .. code-block:: bash
- $ ci/deploy.sh -l <lab_name> \
- -p <pod_name> \
- -b <URI to configuration repo containing the PDF file> \
- -s <scenario> \
- -D \
- -S <Storage directory for disk images> |& tee deploy.log
+.. WARNING::
-.. NOTE::
+ The mapping between one network segment (e.g. ``mgmt``) and its ``CIDR``/
+ ``VLAN`` is not configurable on a per-node basis, but instead applies to
+ all the nodes in the cluster.
+
+For each network, the following parameters are currently supported:
+
++--------------------------+--------------------------------------------------+
+| ``idf.net_config.*`` key | Details |
++==========================+==================================================+
+| ``interface`` | The index of the interface to use for this net. |
+| | For each cluster node (if network is present), |
+| | OPNFV Fuel will determine the underlying physical|
+| | interface by picking the element at index |
+| | ``interface`` from the list of network interface |
+| | names defined in |
+| | ``idf.fuel.network.node.*.interfaces``. |
+| | Required for each network. |
+| | |
+| | .. NOTE:: |
+| | |
+| | The interface index should be the |
+| | same on all cluster nodes. This can be |
+| | achieved by ordering them accordingly in |
+| | ``PDF``/``IDF``. |
++--------------------------+--------------------------------------------------+
+| ``vlan`` | ``VLAN`` tag (integer) or the string ``native``. |
+| | Required for each network. |
++--------------------------+--------------------------------------------------+
+| ``ip-range`` | When specified, all cluster IPs dynamically |
+| | allocated by OPNFV Fuel for that network will be |
+| | assigned inside this range. |
+| | Required for ``oob``, optional for others. |
+| | |
+| | .. NOTE:: |
+| | |
+| | For now, only range start address is used. |
++--------------------------+--------------------------------------------------+
+| ``network`` | Network segment address. |
+| | Required for each network, except ``oob``. |
++--------------------------+--------------------------------------------------+
+| ``mask`` | Network segment mask. |
+| | Required for each network, except ``oob``. |
++--------------------------+--------------------------------------------------+
+| ``gateway`` | Gateway IP address. |
+| | Required for ``public``, N/A for others. |
++--------------------------+--------------------------------------------------+
+| ``dns`` | List of DNS IP addresses. |
+| | Required for ``public``, N/A for others. |
++--------------------------+--------------------------------------------------+
+
+Sample ``public`` network configuration block:
+
+.. code-block:: yaml
+
+ idf:
+ net_config:
+ public:
+ interface: 1
+ vlan: native
+ network: 10.0.16.0
+ ip-range: 10.0.16.100-10.0.16.253
+ mask: 24
+ gateway: 10.0.16.254
+ dns:
+ - 8.8.8.8
+ - 8.8.4.4
+
+.. TOPIC:: ``hybrid`` POD notes
+
+ Interface indexes must be the same for all nodes, which is problematic
+ when mixing ``virtual`` nodes (where all interfaces were untagged
+ so far) with ``baremetal`` nodes (where interfaces usually carry
+ tagged VLANs).
+
+ .. TIP::
+
+ To achieve this, a special ``jumpserver`` network layout is used:
+ ``mgmt``, ``storage``, ``private``, ``public`` are trunked together
+ in a single ``trunk`` bridge:
+
+ - without decapsulating them (if they are also tagged on ``baremetal``);
+ a ``trunk.<vlan_tag>`` interface should be created on the
+ ``jumpserver`` for each tagged VLAN so the kernel won't drop the
+ packets;
+ - by decapsulating them first (if they are also untagged on
+ ``baremetal`` nodes);
+
+ The ``trunk`` bridge is then used for all bridges OPNFV Fuel
+ is aware of in ``idf.fuel.jumphost.bridges``, e.g. for a ``trunk`` where
+ only ``mgmt`` network is not decapsulated:
+
+ .. code-block:: yaml
+
+ idf:
+ fuel:
+ jumphost:
+ bridges:
+ admin: 'admin_br'
+ mgmt: 'trunk'
+ private: 'trunk'
+ public: 'trunk'
+ trunks:
+ # mgmt network is not decapsulated for jumpserver infra VMs,
+ # to align with the VLAN configuration of baremetal nodes.
+ mgmt: True
- The deployment uses the OPNFV Pharos project as input (PDF and IDF files)
- for hardware and network configuration of all current OPNFV PODs.
- When deploying a new POD, one can pass the ``-b`` flag to the deploy script to override
- the path for the labconfig directory structure containing the PDF and IDF (see below).
+.. WARNING::
-Examples
---------
-#. Virtual deploy
+ The Linux kernel limits the name of network interfaces to 16 characters.
+ Extra care is required when choosing bridge names, so appending the
+ ``VLAN`` tag won't lead to an interface name length exceeding that limit.
+
+``idf.fuel.network``
+--------------------
+
+``idf.fuel.network`` allows mapping the cluster networks (e.g. ``mgmt``) to
+their physical interface name (e.g. ``eth0``) and bus address on the cluster
+nodes.
+
+``idf.fuel.network.node`` should be a list with the same number (and order) of
+elements as the cluster nodes defined in ``PDF``, e.g. the second cluster node
+in ``PDF`` will use the interface name and bus address defined in the second
+list element.
+
+Below is a sample configuration block for a single node with two interfaces:
+
+.. code-block:: yaml
+
+ idf:
+ fuel:
+ network:
+ node:
+ # Ordered-list, index should be in sync with node index in PDF
+ - interfaces:
+ # Ordered-list, index should be in sync with interface index
+ # in PDF
+ - 'ens3'
+ - 'ens4'
+ busaddr:
+ # Bus-info reported by `ethtool -i ethX`
+ - '0000:00:03.0'
+ - '0000:00:04.0'
+
+
+``idf.fuel.reclass``
+--------------------
+
+``idf.fuel.reclass`` provides a way of overriding default values in the
+reclass cluster model.
+
+This currently covers strictly compute parameter tuning, including huge
+pages, ``CPU`` pinning and other ``DPDK`` settings.
+
+``idf.fuel.reclass.node`` should be a list with the same number (and order) of
+elements as the cluster nodes defined in ``PDF``, e.g. the second cluster node
+in ``PDF`` will use the parameters defined in the second list element.
+
+The following parameters are currently supported:
+
++---------------------------------+-------------------------------------------+
+| ``idf.fuel.reclass.node.*`` | Details |
+| key | |
++=================================+===========================================+
+| ``nova_cpu_pinning`` | List of CPU cores nova will be pinned to. |
+| | |
+| | .. WARNING:: |
+| | |
+| | Currently disabled. |
++---------------------------------+-------------------------------------------+
+| ``compute_hugepages_size`` | Size of each persistent huge pages. |
+| | |
+| | Usual values are ``2M`` and ``1G``. |
++---------------------------------+-------------------------------------------+
+| ``compute_hugepages_count`` | Total number of persistent huge pages. |
++---------------------------------+-------------------------------------------+
+| ``compute_hugepages_mount`` | Mount point to use for huge pages. |
++---------------------------------+-------------------------------------------+
+| ``compute_kernel_isolcpu`` | List of certain CPU cores that are |
+| | isolated from Linux scheduler. |
++---------------------------------+-------------------------------------------+
+| ``compute_dpdk_driver`` | Kernel module to provide userspace I/O |
+| | support. |
++---------------------------------+-------------------------------------------+
+| ``compute_ovs_pmd_cpu_mask`` | Hexadecimal mask of CPUs to run ``DPDK`` |
+| | Poll-mode drivers. |
++---------------------------------+-------------------------------------------+
+| ``compute_ovs_dpdk_socket_mem`` | Set of amount huge pages in ``MB`` to be |
+| | used by ``OVS-DPDK`` daemon taken for each|
+| | ``NUMA`` node. Set size is equal to |
+| | ``NUMA`` nodes count, elements are |
+| | divided by comma. |
++---------------------------------+-------------------------------------------+
+| ``compute_ovs_dpdk_lcore_mask`` | Hexadecimal mask of ``DPDK`` lcore |
+| | parameter used to run ``DPDK`` processes. |
++---------------------------------+-------------------------------------------+
+| ``compute_ovs_memory_channels`` | Number of memory channels to be used. |
++---------------------------------+-------------------------------------------+
+| ``dpdk0_driver`` | NIC driver to use for physical network |
+| | interface. |
++---------------------------------+-------------------------------------------+
+| ``dpdk0_n_rxq`` | Number of ``RX`` queues. |
++---------------------------------+-------------------------------------------+
+
+Sample ``compute_params`` configuration block (for a single node):
+
+.. code-block:: yaml
+
+ idf:
+ fuel:
+ reclass:
+ node:
+ - compute_params:
+ common: &compute_params_common
+ compute_hugepages_size: 2M
+ compute_hugepages_count: 2048
+ compute_hugepages_mount: /mnt/hugepages_2M
+ dpdk:
+ <<: *compute_params_common
+ compute_dpdk_driver: uio
+ compute_ovs_pmd_cpu_mask: "0x6"
+ compute_ovs_dpdk_socket_mem: "1024"
+ compute_ovs_dpdk_lcore_mask: "0x8"
+ compute_ovs_memory_channels: "2"
+ dpdk0_driver: igb_uio
+ dpdk0_n_rxq: 2
+
+``SDF``
+~~~~~~~
+
+Scenario Descriptor Files are not yet implemented in the OPNFV Fuel ``Gambia``
+release.
+
+Instead, embedded OPNFV Fuel scenarios files are locally available in
+``mcp/config/scenario``.
- To start a virtual deployment, it is required to have the **virtual** keyword
- while specifying the pod name to the installer script.
+OPNFV Software Installation and Deployment
+==========================================
- It will create the required bridges and networks, configure Salt Master and
- install OpenStack.
+This section describes the process of installing all the components needed to
+deploy the full OPNFV reference platform stack across a server cluster.
- .. code-block:: bash
+Deployment Types
+~~~~~~~~~~~~~~~~
- $ ci/deploy.sh -l ericsson \
- -p virtual3 \
- -s os-nosdn-nofeature-noha \
- -D \
- -S /home/jenkins/tmpdir |& tee deploy.log
+.. WARNING::
- Once the deployment is complete, the OpenStack Dashboard, Horizon, is
- available at ``http://<controller VIP>:8078``
- The administrator credentials are **admin** / **opnfv_secret**.
+ OPNFV releases previous to ``Gambia`` used to rely on the ``virtual``
+ keyword being part of the POD name (e.g. ``ericsson-virtual2``) to
+ configure the deployment type as ``virtual``. Otherwise ``baremetal``
+ was implied.
- A simple (and generic) sample PDF/IDF set of configuration files may
- be used for virtual deployments by setting lab/POD name to ``local-virtual1``.
- This sample configuration is x86_64 specific and hardcodes certain parameters,
- like public network address space, so a dedicated PDF/IDF is highly recommended.
+``Gambia`` and newer releases are more flexbile towards supporting a mix
+of ``baremetal`` and ``virtual`` nodes, so the type of deployment is
+now automatically determined based on the cluster nodes types in ``PDF``:
- .. code-block:: bash
++---------------------------------+-------------------------------------------+
+| ``PDF`` has nodes of type | Deployment type |
++---------------+-----------------+ |
+| ``baremetal`` | ``virtual`` | |
++===============+=================+===========================================+
+| yes | no | ``baremetal`` |
++---------------+-----------------+-------------------------------------------+
+| yes | yes | ``hybrid`` |
++---------------+-----------------+-------------------------------------------+
+| no | yes | ``virtual`` |
++---------------+-----------------+-------------------------------------------+
- $ ci/deploy.sh -l local \
- -p virtual1 \
- -s os-nosdn-nofeature-noha \
- -D \
- -S /home/jenkins/tmpdir |& tee deploy.log
+Based on that, the deployment script will later enable/disable certain extra
+nodes (e.g. ``mas01``) and/or ``STATE`` files (e.g. ``maas``).
-#. Baremetal deploy
+``HA`` vs ``noHA``
+~~~~~~~~~~~~~~~~~~
- A x86 deploy on pod2 from Linux Foundation lab
+High availability of OpenStack services is determined based on scenario name,
+e.g. ``os-nosdn-nofeature-noha`` vs ``os-nosdn-nofeature-ha``.
- .. code-block:: bash
+.. TIP::
- $ ci/deploy.sh -l lf \
- -p pod2 \
- -s os-nosdn-nofeature-ha \
- -D \
- -S /home/jenkins/tmpdir |& tee deploy.log
+ ``HA`` scenarios imply a virtualized control plane (``VCP``) for the
+ OpenStack services running on the 3 ``kvm`` nodes.
- .. figure:: img/lf_pod2.png
- :align: center
- :alt: Fuel@OPNFV LF POD2 Network Layout
+ .. SEEALSO::
- Fuel@OPNFV LF POD2 Network Layout
+ An experimental feature argument (``-N``) is supported by the deploy
+ script for disabling ``VCP``, although it might not be supported by
+ all scenarios and is not being continuosly validated by OPNFV CI/CD.
- An aarch64 deploy on pod5 from Arm lab
+.. WARNING::
- .. code-block:: bash
+ ``virtual`` ``HA`` deployments are not officially supported, due to
+ poor performance and various limitations of nested virtualization on
+ both ``x86_64`` and ``aarch64`` architectures.
- $ ci/deploy.sh -l arm \
- -p pod5 \
- -s os-nosdn-nofeature-ha \
- -D \
- -S /home/jenkins/tmpdir |& tee deploy.log
+ .. TIP::
- .. figure:: img/arm_pod5.png
- :align: center
- :alt: Fuel@OPNFV ARM POD5 Network Layout
+ ``virtual`` ``HA`` deployments without ``VCP`` are supported, but
+ highly experimental.
- Fuel@OPNFV ARM POD5 Network Layout
++-------------------------------+-------------------------+-------------------+
+| Feature | ``HA`` scenario | ``noHA`` scenario |
++===============================+=========================+===================+
+| ``VCP`` | yes, | no |
+| (Virtualized Control Plane) | disabled with ``-N`` | |
++-------------------------------+-------------------------+-------------------+
+| OpenStack APIs SSL | yes | no |
++-------------------------------+-------------------------+-------------------+
+| Storage | ``GlusterFS`` | ``NFS`` |
++-------------------------------+-------------------------+-------------------+
- Once the deployment is complete, the SaltStack Deployment Documentation is
- available at ``http://<proxy public VIP>:8090``.
+Steps to Start the Automatic Deploy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- When deploying a new POD, one can pass the ``-b`` flag to the deploy script to override
- the path for the labconfig directory structure containing the PDF and IDF.
+These steps are common for ``virtual``, ``baremetal`` or ``hybrid`` deploys,
+``x86_64``, ``aarch64`` or ``mixed`` (``x86_64`` and ``aarch64``):
- .. code-block:: bash
+- Clone the OPNFV Fuel code from gerrit
+- Checkout the ``Gambia`` release tag
+- Start the deploy script
- $ ci/deploy.sh -b file://<absolute_path_to_labconfig> \
- -l <lab_name> \
- -p <pod_name> \
- -s <scenario> \
- -D \
- -S <tmp_folder> |& tee deploy.log
+.. NOTE::
- - <absolute_path_to_labconfig> is the absolute path to a local directory, populated
- similar to Pharos, i.e. PDF/IDF reside in ``<absolute_path_to_labconfig>/labs/<lab_name>``
- - <lab_name> is the same as the directory in the path above
- - <pod_name> is the name used for the PDF (``<pod_name>.yaml``) and IDF (``idf-<pod_name>.yaml``) files
+ The deployment uses the OPNFV Pharos project as input (``PDF`` and
+ ``IDF`` files) for hardware and network configuration of all current
+ OPNFV PODs.
+ When deploying a new POD, one may pass the ``-b`` flag to the deploy
+ script to override the path for the labconfig directory structure
+ containing the ``PDF`` and ``IDF`` (``<URI to configuration repo ...>`` is
+ the absolute path to a local or remote directory structure, populated
+ similar to `pharos git repo`_, i.e. ``PDF``/``IDF`` reside in a
+ subdirectory called ``labs/<lab_name>``).
+.. code-block:: console
-Pod and Installer Descriptor Files
-==================================
+ jenkins@jumpserver:~$ git clone https://git.opnfv.org/fuel
+ jenkins@jumpserver:~$ cd fuel
+ jenkins@jumpserver:~/fuel$ git checkout opnfv-7.0.0
+ jenkins@jumpserver:~/fuel$ ci/deploy.sh -l <lab_name> \
+ -p <pod_name> \
+ -b <URI to configuration repo containing the PDF/IDF files> \
+ -s <scenario> \
+ -D \
+ -S <Storage directory for deploy artifacts> |& tee deploy.log
-Descriptor files provide the installer with an abstraction of the target pod
-with all its hardware characteristics and required parameters. This information
-is split into two different files:
-Pod Descriptor File (PDF) and Installer Descriptor File (IDF).
+.. TIP::
-The Pod Descriptor File is a hardware description of the pod
-infrastructure. The information is modeled under a yaml structure.
-A reference file with the expected yaml structure is available at
-``mcp/config/labs/local/pod1.yaml``.
+ Besides the basic options, there are other recommended deploy arguments:
-The hardware description is arranged into a main "jumphost" node and a "nodes"
-set for all target boards. For each node the following characteristics
-are defined:
+ - use ``-D`` option to enable the debug info
+ - use ``-S`` option to point to a tmp dir where the disk images are saved.
+ The deploy artifacts will be re-used on subsequent (re)deployments.
+ - use ``|& tee`` to save the deploy log to a file
+
+Typical Cluster Examples
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Common cluster layouts usually fall into one of the cases described below,
+categorized by deployment type (``baremetal``, ``virtual`` or ``hybrid``) and
+high availability (``HA`` or ``noHA``).
-- Node parameters including CPU features and total memory.
-- A list of available disks.
-- Remote management parameters.
-- Network interfaces list including mac address, speed, advanced features and name.
+A simplified overview of the steps ``deploy.sh`` will automatically perform is:
+
+- create a Salt Master Docker container on the jumpserver, which will drive
+ the rest of the installation;
+- ``baremetal`` or ``hybrid`` only: create a ``MaaS`` infrastructure node VM,
+ which will be leveraged using Salt to handle OS provisioning on the
+ ``baremetal`` nodes;
+- leverage Salt to install & configure OpenStack;
.. NOTE::
- The fixed IPs are ignored by the MCP installer script and it will instead
- assign based on the network ranges defined in IDF.
+ A virtual network ``mcpcontrol`` is always created for initial connection
+ of the VMs on Jumphost.
-The Installer Descriptor File extends the PDF with pod related parameters
-required by the installer. This information may differ per each installer type
-and it is not considered part of the pod infrastructure.
-The IDF file must be named after the PDF with the prefix "idf-". A reference file with the expected
-structure is available at ``mcp/config/labs/local/idf-pod1.yaml``.
-
-The file follows a yaml structure and two sections "net_config" and "fuel" are expected.
-
-The "net_config" section describes all the internal and provider networks
-assigned to the pod. Each used network is expected to have a vlan tag, IP subnet and
-attached interface on the boards. Untagged vlans shall be defined as "native".
-
-The "fuel" section defines several sub-sections required by the Fuel installer:
-
-- jumphost: List of bridge names for each network on the Jumpserver.
-- network: List of device name and bus address info of all the target nodes.
- The order must be aligned with the order defined in PDF file. Fuel installer relies on the IDF model
- to setup all node NICs by defining the expected device name and bus address.
-- maas: Defines the target nodes commission timeout and deploy timeout. (optional)
-- reclass: Defines compute parameter tuning, including huge pages, cpu pinning
- and other DPDK settings. (optional)
-
-The following parameters can be defined in the IDF files under "reclass". Those value will
-overwrite the default configuration values in Fuel repository:
-
-- nova_cpu_pinning: List of CPU cores nova will be pinned to. Currently disabled.
-- compute_hugepages_size: Size of each persistent huge pages. Usual values are '2M' and '1G'.
-- compute_hugepages_count: Total number of persistent huge pages.
-- compute_hugepages_mount: Mount point to use for huge pages.
-- compute_kernel_isolcpu: List of certain CPU cores that are isolated from Linux scheduler.
-- compute_dpdk_driver: Kernel module to provide userspace I/O support.
-- compute_ovs_pmd_cpu_mask: Hexadecimal mask of CPUs to run DPDK Poll-mode drivers.
-- compute_ovs_dpdk_socket_mem: Set of amount huge pages in MB to be used by OVS-DPDK daemon
- taken for each NUMA node. Set size is equal to NUMA nodes count, elements are divided by comma.
-- compute_ovs_dpdk_lcore_mask: Hexadecimal mask of DPDK lcore parameter used to run DPDK processes.
-- compute_ovs_memory_channels: Number of memory channels to be used.
-- dpdk0_driver: NIC driver to use for physical network interface.
-- dpdk0_n_rxq: Number of RX queues.
-
-
-The full description of the PDF and IDF file structure are available as yaml schemas.
-The schemas are defined as a git submodule in Fuel repository. Input files provided
-to the installer will be validated against the schemas.
-
-- ``mcp/scripts/pharos/config/pdf/pod1.schema.yaml``
-- ``mcp/scripts/pharos/config/pdf/idf-pod1.schema.yaml``
+.. WARNING::
-=============
-Release Notes
-=============
+ A single cluster deployment per ``jumpserver`` node is currently supported,
+ indifferent of its type (``virtual``, ``baremetal`` or ``hybrid``).
-Please refer to the :ref:`Release Notes <fuel-release-notes-label>` article.
+Once the deployment is complete, the following should be accessible:
-==========
-References
-==========
++---------------+----------------------------------+---------------------------+
+| Resource | ``HA`` scenario | ``noHA`` scenario |
++===============+==================================+===========================+
+| ``Horizon`` | ``https://<prx public VIP>`` | ``http://<ctl VIP>:8078`` |
+| (Openstack | | |
+| Dashboard) | | |
++---------------+----------------------------------+---------------------------+
+| ``SaltStack`` | ``http://<prx public VIP>:8090`` | N/A |
+| Deployment | | |
+| Documentation | | |
++---------------+----------------------------------+---------------------------+
-OPNFV
+.. SEEALSO::
-1) `OPNFV Home Page <https://www.opnfv.org>`_
-2) `OPNFV documentation <https://docs.opnfv.org>`_
-3) `Software downloads <https://www.opnfv.org/software/download>`_
+ For more details on locating and importing the generated SSL certificate,
+ see :ref:`OPNFV Fuel User Guide <fuel-userguide>`.
-OpenStack
+``virtual`` ``noHA`` POD
+------------------------
-4) `OpenStack Queens Release Artifacts <https://www.openstack.org/software/queens>`_
-5) `OpenStack Documentation <https://docs.openstack.org>`_
+In the following figure there are two generic examples of ``virtual`` deploys,
+each on a separate Jumphost node, both behind the same ``TOR`` switch:
-OpenDaylight
+- Jumphost 1 has only virsh bridges (created by the deploy script);
+- Jumphost 2 has a mix of Linux (manually created) and ``libvirt`` managed
+ bridges (created by the deploy script);
-6) `OpenDaylight Artifacts <https://www.opendaylight.org/software/downloads>`_
+.. figure:: img/fuel_virtual_noha.png
+ :align: center
+ :width: 60%
+ :alt: OPNFV Fuel Virtual noHA POD Network Layout Examples
+
+ OPNFV Fuel Virtual noHA POD Network Layout Examples
+
+ +-------------+------------------------------------------------------------+
+ | ``cfg01`` | Salt Master Docker container |
+ +-------------+------------------------------------------------------------+
+ | ``ctl01`` | Controller VM |
+ +-------------+------------------------------------------------------------+
+ | ``gtw01`` | Gateway VM with neutron services |
+ | | (``DHCP`` agent, ``L3`` agent, ``metadata`` agent etc) |
+ +-------------+------------------------------------------------------------+
+ | ``odl01`` | VM on which ``ODL`` runs |
+ | | (for scenarios deployed with ODL) |
+ +-------------+------------------------------------------------------------+
+ | ``cmp001``, | Compute VMs |
+ | ``cmp002`` | |
+ +-------------+------------------------------------------------------------+
+
+.. TIP::
+
+ If external access to the ``public`` network is not required, there is
+ little to no motivation to create a custom ``PDF``/``IDF`` set for a
+ virtual deployment.
+
+ Instead, the existing virtual PODs definitions in `pharos git repo`_ can
+ be used as-is:
+
+ - ``ericsson-virtual1`` for ``x86_64``;
+ - ``arm-virtual2`` for ``aarch64``;
+
+.. code-block:: console
+
+ # example deploy cmd for an x86_64 virtual cluster
+ jenkins@jumpserver:~/fuel$ ci/deploy.sh -l ericsson \
+ -p virtual1 \
+ -s os-nosdn-nofeature-noha \
+ -D \
+ -S /home/jenkins/tmpdir |& tee deploy.log
+
+``baremetal`` ``noHA`` POD
+--------------------------
-Fuel
+.. WARNING::
-7) `Mirantis Cloud Platform Documentation <https://docs.mirantis.com/mcp/latest>`_
+ These scenarios are not tested in OPNFV CI, so they are considered
+ experimental.
-Salt
+.. figure:: img/fuel_baremetal_noha.png
+ :align: center
+ :width: 60%
+ :alt: OPNFV Fuel Baremetal noHA POD Network Layout Example
+
+ OPNFV Fuel Baremetal noHA POD Network Layout Example
+
+ +-------------+------------------------------------------------------------+
+ | ``cfg01`` | Salt Master Docker container |
+ +-------------+------------------------------------------------------------+
+ | ``mas01`` | MaaS Node VM |
+ +-------------+------------------------------------------------------------+
+ | ``ctl01`` | Baremetal controller node |
+ +-------------+------------------------------------------------------------+
+ | ``gtw01`` | Baremetal Gateway with neutron services |
+ | | (dhcp agent, L3 agent, metadata, etc) |
+ +-------------+------------------------------------------------------------+
+ | ``odl01`` | Baremetal node on which ODL runs |
+ | | (for scenarios deployed with ODL, otherwise unused |
+ +-------------+------------------------------------------------------------+
+ | ``cmp001``, | Baremetal Computes |
+ | ``cmp002`` | |
+ +-------------+------------------------------------------------------------+
+ | Tenant VM | VM running in the cloud |
+ +-------------+------------------------------------------------------------+
+
+``baremetal`` ``HA`` POD
+------------------------
+
+.. figure:: img/fuel_baremetal_ha.png
+ :align: center
+ :width: 60%
+ :alt: OPNFV Fuel Baremetal HA POD Network Layout Example
+
+ OPNFV Fuel Baremetal HA POD Network Layout Example
+
+ +---------------------------+----------------------------------------------+
+ | ``cfg01`` | Salt Master Docker container |
+ +---------------------------+----------------------------------------------+
+ | ``mas01`` | MaaS Node VM |
+ +---------------------------+----------------------------------------------+
+ | ``kvm01``, | Baremetals which hold the VMs with |
+ | ``kvm02``, | controller functions |
+ | ``kvm03`` | |
+ +---------------------------+----------------------------------------------+
+ | ``prx01``, | Proxy VMs for Nginx |
+ | ``prx02`` | |
+ +---------------------------+----------------------------------------------+
+ | ``msg01``, | RabbitMQ Service VMs |
+ | ``msg02``, | |
+ | ``msg03`` | |
+ +---------------------------+----------------------------------------------+
+ | ``dbs01``, | MySQL service VMs |
+ | ``dbs02``, | |
+ | ``dbs03`` | |
+ +---------------------------+----------------------------------------------+
+ | ``mdb01``, | Telemetry VMs |
+ | ``mdb02``, | |
+ | ``mdb03`` | |
+ +---------------------------+----------------------------------------------+
+ | ``odl01`` | VM on which ``OpenDaylight`` runs |
+ | | (for scenarios deployed with ``ODL``) |
+ +---------------------------+----------------------------------------------+
+ | ``cmp001``, | Baremetal Computes |
+ | ``cmp002`` | |
+ +---------------------------+----------------------------------------------+
+ | Tenant VM | VM running in the cloud |
+ +---------------------------+----------------------------------------------+
+
+.. code-block:: console
+
+ # x86_x64 baremetal deploy on pod2 from Linux Foundation lab (lf-pod2)
+ jenkins@jumpserver:~/fuel$ ci/deploy.sh -l lf \
+ -p pod2 \
+ -s os-nosdn-nofeature-ha \
+ -D \
+ -S /home/jenkins/tmpdir |& tee deploy.log
+
+.. code-block:: console
+
+ # aarch64 baremetal deploy on pod5 from Enea ARM lab (arm-pod5)
+ jenkins@jumpserver:~/fuel$ ci/deploy.sh -l arm \
+ -p pod5 \
+ -s os-nosdn-nofeature-ha \
+ -D \
+ -S /home/jenkins/tmpdir |& tee deploy.log
+
+``hybrid`` ``noHA`` POD
+-----------------------
+
+.. figure:: img/fuel_hybrid_noha.png
+ :align: center
+ :width: 60%
+ :alt: OPNFV Fuel Hybrid noHA POD Network Layout Examples
+
+ OPNFV Fuel Hybrid noHA POD Network Layout Examples
+
+ +-------------+------------------------------------------------------------+
+ | ``cfg01`` | Salt Master Docker container |
+ +-------------+------------------------------------------------------------+
+ | ``mas01`` | MaaS Node VM |
+ +-------------+------------------------------------------------------------+
+ | ``ctl01`` | Controller VM |
+ +-------------+------------------------------------------------------------+
+ | ``gtw01`` | Gateway VM with neutron services |
+ | | (``DHCP`` agent, ``L3`` agent, ``metadata`` agent etc) |
+ +-------------+------------------------------------------------------------+
+ | ``odl01`` | VM on which ``ODL`` runs |
+ | | (for scenarios deployed with ODL) |
+ +-------------+------------------------------------------------------------+
+ | ``cmp001``, | Baremetal Computes |
+ | ``cmp002`` | |
+ +-------------+------------------------------------------------------------+
+
+Automatic Deploy Breakdown
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When an automatic deploy is started, the following operations are performed
+sequentially by the deploy script:
+
++------------------+----------------------------------------------------------+
+| **Deploy stage** | **Details** |
++==================+==========================================================+
+| Argument | enviroment variables and command line arguments passed |
+| Parsing | to ``deploy.sh`` are interpreted |
++------------------+----------------------------------------------------------+
+| Distribution | Install and/or configure mandatory requirements on the |
+| Package | ``jumpserver`` node: |
+| Installation | |
+| | - ``Docker`` (from upstream and not distribution repos, |
+| | as the version included in ``Ubuntu`` ``Xenial`` is |
+| | outdated); |
+| | - ``docker-compose`` (from upstream, as the version |
+| | included in both ``CentOS 7`` and |
+| | ``Ubuntu Xenial 16.04`` has dependency issues on most |
+| | systems); |
+| | - ``virt-inst`` (from upstream, as the version included |
+| | in ``Ubuntu Xenial 16.04`` is outdated and lacks |
+| | certain required features); |
+| | - other miscelaneous requirements, depending on |
+| | ``jumpserver`` distribution OS; |
+| | |
+| | .. SEEALSO:: |
+| | |
+| | - ``mcp/scripts/requirements_deb.yaml`` (``Ubuntu``) |
+| | - ``mcp/scripts/requirements_rpm.yaml`` (``CentOS``) |
+| | |
+| | .. WARNING:: |
+| | |
+| | Mininum required ``Docker`` version is ``17.x``. |
+| | |
+| | .. WARNING:: |
+| | |
+| | Mininum required ``virt-inst`` version is ``1.4``. |
++------------------+----------------------------------------------------------+
+| Patch | For each ``git`` submodule in OPNFV Fuel repository, |
+| Apply | if a subdirectory with the same name exists under |
+| | ``mcp/patches``, all patches in that subdirectory are |
+| | applied using ``git-am`` to the respective ``git`` |
+| | submodule. |
+| | |
+| | This allows OPNFV Fuel to alter upstream repositories |
+| | contents before consuming them, including: |
+| | |
+| | - ``Docker`` container build process customization; |
+| | - ``salt-formulas`` customization; |
+| | - ``reclass.system`` customization; |
+| | |
+| | .. SEEALSO:: |
+| | |
+| | - ``mcp/patches/README.rst`` |
++------------------+----------------------------------------------------------+
+| SSH RSA Keypair | If not already present, a RSA keypair is generated on |
+| Generation | the ``jumpserver`` node at: |
+| | |
+| | - ``/var/lib/opnfv/mcp.rsa{,.pub}`` |
+| | |
+| | The public key will be added to the ``authorized_keys`` |
+| | list for ``ubuntu`` user, so the private key can be used |
+| | for key-based logins on: |
+| | |
+| | - ``cfg01``, ``mas01`` infrastructure nodes; |
+| | - all cluster nodes (``baremetal`` and/or ``virtual``), |
+| | including ``VCP`` VMs; |
++------------------+----------------------------------------------------------+
+| ``j2`` | Based on ``XDF`` (``PDF``, ``IDF``, ``SDF``) and |
+| Expansion | additional deployment configuration determined during |
+| | ``argument parsing`` stage described above, all jinja2 |
+| | templates are expanded, including: |
+| | |
+| | - various classes in ``reclass.cluster``; |
+| | - docker-compose ``yaml`` for Salt Master bring-up; |
+| | - ``libvirt`` network definitions (``xml``); |
++------------------+----------------------------------------------------------+
+| Jumpserver | Basic validation that common ``jumpserver`` requirements |
+| Requirements | are satisfied, e.g. ``PXE/admin`` is Linux bridge if |
+| Check | ``baremetal`` nodes are defined in the ``PDF``. |
++------------------+----------------------------------------------------------+
+| Infrastucture | .. NOTE:: |
+| Setup | |
+| | All steps apply to and only to the ``jumpserver``. |
+| | |
+| | - prepare virtual machines; |
+| | - (re)create ``libvirt`` managed networks; |
+| | - apply ``sysctl`` configuration; |
+| | - apply ``udev`` configuration; |
+| | - create & start virtual machines prepared earlier; |
+| | - create & start Salt Master (``cfg01``) Docker |
+| | container; |
++------------------+----------------------------------------------------------+
+| ``STATE`` | Based on deployment type, scenario and other parameters, |
+| Files | a ``STATE`` file list is constructed, then executed |
+| | sequentially. |
+| | |
+| | .. TIP:: |
+| | |
+| | The table below lists all current ``STATE`` files |
+| | and their intended action. |
+| | |
+| | .. SEEALSO:: |
+| | |
+| | For more information on how the list of ``STATE`` |
+| | files is constructed, see |
+| | :ref:`OPNFV Fuel User Guide <fuel-userguide>`. |
++------------------+----------------------------------------------------------+
+| Log | Contents of ``/var/log`` are recursively gathered from |
+| Collection | all the nodes, then archived together for later |
+| | inspection. |
++------------------+----------------------------------------------------------+
+
+``STATE`` Files Overview
+------------------------
+
++---------------------------+-------------------------------------------------+
+| ``STATE`` file | Targets involved and main intended action |
++===========================+=================================================+
+| ``virtual_init`` | ``cfg01``: reclass node generation |
+| | |
+| | ``jumpserver`` VMs (e.g. ``mas01``): basic OS |
+| | config |
++---------------------------+-------------------------------------------------+
+| ``maas`` | ``mas01``: OS, MaaS installation, |
+| | ``baremetal`` node commissioning and deploy |
+| | |
+| | .. NOTE:: |
+| | |
+| | Skipped if no ``baremetal`` nodes are |
+| | defined in ``PDF`` (``virtual`` deploy). |
++---------------------------+-------------------------------------------------+
+| ``baremetal_init`` | ``kvm``, ``cmp``: OS install, config |
++---------------------------+-------------------------------------------------+
+| ``dpdk`` | ``cmp``: configure OVS-DPDK |
++---------------------------+-------------------------------------------------+
+| ``networks`` | ``ctl``: create OpenStack networks |
++---------------------------+-------------------------------------------------+
+| ``neutron_gateway`` | ``gtw01``: configure Neutron gateway |
++---------------------------+-------------------------------------------------+
+| ``opendaylight`` | ``odl01``: install & configure ``ODL`` |
++---------------------------+-------------------------------------------------+
+| ``openstack_noha`` | cluster nodes: install OpenStack without ``HA`` |
++---------------------------+-------------------------------------------------+
+| ``openstack_ha`` | cluster nodes: install OpenStack with ``HA`` |
++---------------------------+-------------------------------------------------+
+| ``virtual_control_plane`` | ``kvm``: create ``VCP`` VMs |
+| | |
+| | ``VCP`` VMs: basic OS config |
+| | |
+| | .. NOTE:: |
+| | |
+| | Skipped if ``-N`` deploy argument is used. |
++---------------------------+-------------------------------------------------+
+| ``tacker`` | ``ctl``: install & configure Tacker |
++---------------------------+-------------------------------------------------+
-8) `Saltstack Documentation <https://docs.saltstack.com/en/latest/topics>`_
-9) `Saltstack Formulas <https://salt-formulas.readthedocs.io/en/latest/develop/overview-reclass.html>`_
+Release Notes
+=============
+
+Please refer to the :ref:`OPNFV Fuel Release Notes <fuel-releasenotes>`
+article.
-Reclass
+References
+==========
-10) `Reclass model <https://reclass.pantsfullofunix.net>`_
+For more information on the OPNFV ``Gambia`` 7.0 release, please see:
+
+#. `OPNFV Home Page`_
+#. `OPNFV Documentation`_
+#. `OPNFV Software Downloads`_
+#. `OPNFV Gambia Wiki Page`_
+#. `OpenStack Queens Release Artifacts`_
+#. `OpenStack Documentation`_
+#. `OpenDaylight Artifacts`_
+#. `Mirantis Cloud Platform Documentation`_
+#. `Saltstack Documentation`_
+#. `Saltstack Formulas`_
+#. `Reclass`_
+
+.. FIXME: cleanup unused refs, extend above list
+.. _`OpenDaylight`: https://www.opendaylight.org/software
+.. _`OpenDaylight Artifacts`: https://www.opendaylight.org/software/downloads
+.. _`MCP`: https://www.mirantis.com/software/mcp/
+.. _`Mirantis Cloud Platform Documentation`: https://docs.mirantis.com/mcp/latest/
+.. _`fuel git repository`: https://git.opnfv.org/fuel
+.. _`pharos git repo`: https://git.opnfv.org/pharos
+.. _`OpenStack Documentation`: https://docs.openstack.org
+.. _`OpenStack Queens Release Artifacts`: https://www.openstack.org/software/queens
+.. _`OPNFV Home Page`: https://www.opnfv.org
+.. _`OPNFV Gambia Wiki Page`: https://wiki.opnfv.org/releases/Gambia
+.. _`OPNFV Documentation`: https://docs.opnfv.org
+.. _`OPNFV Software Downloads`: https://www.opnfv.org/software/download
+.. _`Apache License 2.0`: https://www.apache.org/licenses/LICENSE-2.0
+.. _`Saltstack Documentation`: https://docs.saltstack.com/en/latest/topics/
+.. _`Saltstack Formulas`: https://salt-formulas.readthedocs.io/en/latest/
+.. _`Reclass`: https://reclass.pantsfullofunix.net
+.. _`OPNFV Pharos Specification`: https://wiki.opnfv.org/display/pharos/Pharos+Specification
+.. _`OPNFV PDF Wiki Page`: https://wiki.opnfv.org/display/INF/POD+Descriptor