aboutsummaryrefslogtreecommitdiffstats
path: root/docs/installation-instruction.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/installation-instruction.rst')
-rw-r--r--docs/installation-instruction.rst636
1 files changed, 636 insertions, 0 deletions
diff --git a/docs/installation-instruction.rst b/docs/installation-instruction.rst
new file mode 100644
index 000000000..5c4438991
--- /dev/null
+++ b/docs/installation-instruction.rst
@@ -0,0 +1,636 @@
+=============================================================================================================
+OPNFV Installation instruction for the Brahmaputra WP1 release of OPNFV when using Fuel as a deployment tool
+=============================================================================================================
+
+.. contents:: Table of Contents
+ :backlinks: none
+
+Abstract
+========
+This document describes how to install the Brahmaputra WP1 release of
+OPNFV when using Fuel as a deployment tool covering it's limitations,
+dependencies and required system resources.
+
+License
+=======
+Brahmaputra WP1 release of OPNFV when using Fuel as a deployment tool
+Docs (c) by Jonas Bjurel (Ericsson AB)
+
+Brahmaputra WP1 release of OPNFV when using Fuel as a deployment tool
+Docs are licensed under a Creative Commons Attribution 4.0
+International License. You should have received a copy of the license
+along with this. If not, see
+<http://creativecommons.org/licenses/by/4.0/>.
+
+Version history
+===============
++--------------------+--------------------+--------------------+--------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| 2015-06-03 | 1.0.0 | Jonas Bjurel | Installation |
+| | | (Ericsson AB) | instruction for |
+| | | | the Arno release |
+| | | | |
+| 2015-09-27 | 1.1.0 | Daniel Smith | ARNO SR1-RC1 |
+| | | (Ericsson AB) | update |
+| | | | |
+| | | | |
+| 2015-11-19 | 2.0.0 | Daniel Smith | B-Rel WP1 update |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+
+Introduction
+============
+
+This document describes providing guidelines on how to install and
+configure the Brahmaputra WP1 release of OPNFV when using Fuel as a
+deployment tool including required software and hardware
+configurations.
+
+Although the available installation options gives a high degree of
+freedom in how the system is set-up including architecture, services
+and features, etc. said permutations may not provide an OPNFV
+compliant reference architecture. This instruction provides a
+step-by-step guide that results in an OPNFV Brahmaputra WP1 compliant
+deployment.
+
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
+
+Preface
+=======
+Before starting the installation of the Brahmaputra WP1 release of
+OPNFV when using Fuel as a deployment tool, some planning must be
+done.
+
+Retrieving the ISO image
+------------------------
+
+First of all, the Fuel deployment ISO image needs to be retrieved, the
+.iso image of the Brahmaputra WP1 release of OPNFV when using Fuel as
+a deployment tool can be found at
+http://artifacts.opnfv.org/fuel/opnfv-2015-11-19_03-04-21.iso NOTE:
+TO BE UPDATED WITH FINAL B-REL ARTIFACT
+
+
+Building the ISO image
+----------------------
+
+
+Alternatively, you may build the .iso from source by cloning the
+opnfv/genesis git repository. To retrieve the repository for the Arno
+release use the following command:
+
+- git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/fuel
+
+Check-out the Brahmaputra WP1 release tag to set the branch to the
+baseline required to replicate the Brahmaputra WP1 release:
+
+- TODO: NEEDS UPDATE TO REFLECT WP1 TAG / NEW REPO - cd genesis; git
+ checkout stable/arno2015.2.0
+
+Go to the fuel directory and build the .iso:
+
+- cd fuel/build; make all
+
+For more information on how to build, please see "OPNFV Build
+instructions for - Brahmaputra WP1 release of OPNFV when using Fuel as
+a deployment tool which you retrieved with the repository at
+</fuel/fuel/docs/src/build-instructions.rst>
+
+Next, familiarize yourself with the Fuel 7.0 version by reading the
+following documents:
+
+- Fuel planning guide
+ <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>
+
+- Fuel user guide
+ <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>
+
+- Fuel operations guide
+ <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>
+
+- Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>
+
+A number of deployment specific parameters must be collected, those are:
+
+1. Provider sub-net and gateway information
+
+2. Provider VLAN information
+
+3. Provider DNS addresses
+
+4. Provider NTP addresses
+
+5. Network Topology you plan to Deploy (VLAN, GRE(VXLAN), FLAT)
+
+6. Linux Distro you intend to deploy.
+
+7. How many nodes and what roles you want to deploy (Controllers,
+Storage, Computes)
+
+8. Monitoring Options you want to deploy (Ceilometer, MongoDB).
+
+9. Other options not covered in the document are available in the
+links above
+
+
+This information will be needed for the configuration procedures
+provided in this document.
+
+Hardware requirements
+=====================
+
+The following minimum hardware requirements must be met for the
+installation of Brahmaputra WP1 using Fuel:
+
++--------------------+------------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++--------------------+------------------------------------------------------+
+| **# of nodes** | Minimum 6 (3 for non redundant deployment): |
+| | |
+| | - 1 Fuel deployment master (may be virtualized) |
+| | |
+| | - 3(1) Controllers |
+| | |
+| | - 1 Compute |
+| | |
+| | - 1 Ceilometer (VM option) |
++--------------------+------------------------------------------------------+
+| **CPU** | Minimum 1 socket x86_AMD64 with Virtualization |
+| | support |
++--------------------+------------------------------------------------------+
+| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
+| | |
++--------------------+------------------------------------------------------+
+| **Disk** | Minimum 256GB 10kRPM spinning disks |
+| | |
++--------------------+------------------------------------------------------+
+| **Networks** | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE) |
+| | |
+| | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network |
+| | |
+| | note: These can be run on single NIC - or spread out |
+| | over other nics as your hardware supports |
++--------------------+------------------------------------------------------+
+
+Help with Hardware Requirements
+===============================
+
+
+Calculate hardware requirements:
+
+Refer to the OpenStack Hardware Compability List
+<https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list/>
+for more information on various hardware types available for use.
+
+When choosing the hardware on which you will deploy your OpenStack
+environment, you should think about:
+
+ - CPU -- Consider the number of virtual machines that you plan
+ to deploy in your cloud environment and the CPU per virtual
+ machine.
+ - Memory -- Depends on the amount of RAM assigned per virtual
+ machine and the controller node.
+ - Storage -- Depends on the local drive space per virtual
+ machine, remote volumes that can be attached to a virtual
+ machine, and object storage.
+ - Networking -- Depends on the Choose Network Topology, the
+ network bandwidth per virtual machine, and network storage.
+
+
+Top of the rack (TOR) Configuration requirements
+================================================
+
+The switching infrastructure provides connectivity for the OPNFV
+infrastructure operations, tenant networks (East/West) and provider
+connectivity (North/South bound connectivity); it also provides needed
+connectivity for the storage Area Network (SAN). To avoid traffic
+congestion, it is strongly suggested that three physically separated
+networks are used, that is: 1 physical network for administration and
+control, one physical network for tenant private and public networks,
+and one physical network for SAN. The switching connectivity can (but
+does not need to) be fully redundant, in such case it and comprises a
+redundant 10GE switch pair for each of the three physically separated
+networks.
+
+The physical TOR switches are **not** automatically configured from
+the OPNFV reference platform. All the networks involved in the OPNFV
+infrastructure as well as the provider networks and the private tenant
+VLANs needs to be manually configured.
+
+Manual configuration of the Brahmaputra WP1 hardware platform should
+be carried out according to the Pharos specification TODO-<insert link
+to Pharos ARNO SR1 Specification>
+
+OPNFV Software installation and deployment
+==========================================
+
+This section describes the installation of the OPNFV installation
+server (Fuel master) as well as the deployment of the full OPNFV
+reference platform stack across a server cluster.
+
+Install Fuel master
+-------------------
+1. Mount the Brahmaputra WP1 ISO file as a boot device to the jump host server.
+
+2. Reboot the jump host to establish the Fuel server.
+
+ - The system now boots from the ISO image.
+
+ - Select 'DVD Fuel Install (Static IP)'
+
+ - Press [Enter].
+
+3. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
+
+4. In the 'Fuel User' Section - Confirm/change the default password
+ - Enter 'admin' in the Fuel password input
+
+ - Enter 'admin' in the Confim password input
+
+ - Select 'Check' and press [Enter]
+
+5. In 'Network Setup' Section - Configure DHCP/Static IP information
+for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL
+booting and ETH1 is DHCP in your corporate/lab network.
+
+ - Configure eth1 or other network interfaces here as well (if you
+ have them present on your FUEL server).
+
+6. In 'PXE Setup' Section - Change the following fields to appropriate
+values (example below):
+
+ - DHCP Pool Start 10.20.0.3
+
+ - DHCP Pool End 10.20.0.254
+
+ - DHCP Pool Gateway 10.20.0.2 (ip of Fuel node)
+
+7. In 'DNS & Hostname' - Change the following fields to appropriate values:
+
+ - Hostname <OPNFV Region name>-fuel
+
+ - Domain <Domain Name>
+
+ - Search Domain <Search Domain Name>
+
+ - External DNS
+
+ - Hostname to test DNS <Hostname to test DNS>
+
+ - Select 'Check' and press [Enter]
+
+
+8. OPTION TO ENABLE PROXY SUPPORT - In 'Bootstrap Image', edit the
+following fields to define a proxy.
+
+ NOTE: cannot be used in tandem with local repo support
+ NOTE: not tested with ODL for support (plugin)
+
+ - Navigate to 'HTTP proxy' and input your http proxy address
+
+ - Select 'Check' and press [Enter]
+
+
+9. In 'Time Sync' Section - Change the following fields to appropriate values:
+
+ - NTP Server 1 <Customer NTP server 1>
+
+ - NTP Server 2 <Customer NTP server 2>
+
+ - NTP Server 3 <Customer NTP server 3>
+
+10. Start the installation.
+
+ - Select Quit Setup and press Save and Quit.
+
+ - Installation starts, wait until a screen with logon credentials is shown.
+
+
+Boot the Node Servers
+---------------------
+
+After the Fuel Master node has rebooted from the above step and is at
+the login prompt, you should boot the Node Servers (Your
+Compute/Control/Storage blades (nested or real)) with a PXE Booting
+Scheme so that the FUEL
+Master can pick them up for control.
+
+11. Enable PXE booting
+
+ - For every controller and compute server: enable PXE Booting as
+ the first boot device in the BIOS boot order menu and hard disk
+ as the second boot device in the same menu.
+
+12. Reboot all the control and compute blades.
+
+13. Wait for the availability of nodes showing up in the Fuel GUI.
+
+ - Connect to the FUEL UI via the URL provided in the Console
+ (default: http://10.20.0.2:8000)
+
+ - Wait until all nodes are displayed in top right corner of the
+ Fuel GUI: <total number of server> TOTAL NODES and <total number
+ of servers> UNALLOCATED NODES.
+
+
+
+Install ODL Plugin on FUEL node
+-------------------------------
+
+NOTE: CURRENTLY DISABLED IN B-REL WP1
+
+14. SSH to your FUEL node (e.g. root@10.20.0.2 pwd: r00tme)
+
+15. Verify the plugin exists at /opt/opnfv/opendaylight-0.6-0.6.1-1.noarch.rpm
+
+16. Install the plugin with the command
+
+ - "fuel plugins --install /opt/opnfv/opendaylight-0.6-0.6.1-1.noarch.rpm"
+
+ - Expected output: "Plugin opendaylight-0.6-0.6.1-1.noarch.rpm was
+ successfully installed."
+
+
+Create an OPNFV Environment
+---------------------------
+
+17. Connect to Fuel WEB UI with a browser towards port http://<ip of
+fuel server>:8000 (login admin/admin)
+
+18. Create and name a new OpenStack environment, to be installed.
+
+19. Select <Kilo on Ubuntu 14.04> and press "Next"
+
+20. Select compute virtulization method.
+
+ - Select KVM as hypervisor (or one of your choosing) and press "Next"
+
+18. Select network mode.
+
+ - Select Neutron with GRE segmentation and press "Next"
+
+ Note: Required if using the ODL plugin
+
+19. Select Storage Back-ends.
+
+ - Select "Yes, use Ceph" if you intend to deploy Ceph Backends and
+ press "Next"
+
+20. Select additional services you wish to install.
+
+ - Check option <Install Celiometer (OpenStack Telemetry)> and press "Next"
+ Note: If you use Ceilometer and you only have 5 nodes, you may
+ have to run in a 3/1/1 (controller/ceilo-mongo/compute)
+ configuration. Suggest adding more compute nodes
+
+21. Create the new environment.
+
+ - Click "Create" Button
+
+Configure the OPNFV environment
+-------------------------------
+
+22. Enable PXE booting (if you haven't done this already)
+
+ - For every controller and compute server: enable PXE Booting as
+ the first boot device in the BIOS boot order menu and hard disk
+ as the second boot device in the same menu.
+
+23. Wait for the availability of nodes showing up in the Fuel GUI.
+
+ - Wait until all nodes are displayed in top right corner of the
+ Fuel GUI: <total number of server> TOTAL NODES and <total number
+ of servers> UNALLOCATED NODES.
+
+24. Open the environment you previously created.
+
+25. Open the networks tab.
+
+26. Update the Public network configuration.
+
+ Change the following fields to appropriate values:
+
+ - IP Range Start to <Public IP Address start>
+
+ - IP Range End to <Public IP Address end>
+
+ - CIDR to <CIDR for Public IP Addresses>
+
+ - Check VLAN tagging.
+
+ - Set appropriate VLAN id.
+
+ - Gateway to <Gateway for Public IP Addresses>
+
+ - Set floating ip ranges
+
+
+27. Update the Storage Network Configuration
+
+ - Set CIDR to appropriate value (default 192.168.1.0/24)
+
+ - Set vlan to appropriate value (default 102)
+
+28. Update the Management network configuration.
+
+ - Set CIDR to appropriate value (default 192.168.0.0/24)
+
+ - Check VLAN tagging.
+
+ - Set appropriate VLAN id. (default 101)
+
+29. Update the Private Network Information
+
+ - Set CIDR to appropriate value (default 192.168.2.0/24
+
+ - Check and set VLAN tag appropriately (default 103)
+
+30. Update the Neutron L3 configuration.
+
+ - Set Internal network CIDR to an appropriate value
+
+ - Set Internal network gateway to an appropriate value
+
+ - Set Guest OS DNS Server values appropriately
+
+31. Save Settings.
+
+32. Click on the "Nodes" Tab in the FUEL WEB UI.
+
+33. Assign roles.
+
+ - Click on "+Add Nodes" button
+
+ - Check "Controller" and the "Storage-Ceph OSD" in the Assign Roles Section
+
+ - Check the 3 Nodes you want to act as Controllers from the bottom half of the screen
+
+ - Click <Apply Changes>.
+
+ - Click on "+Add Nodes" button
+
+ - Check "Compute" in the Assign Roles Section
+
+ - Check the Nodes that you want to act as Computes from the bottom half of the screen
+
+ - Click <Apply Changes>.
+
+
+34. Configure interfaces.
+
+ - Check Select <All> to select all nodes with Control, Telemetry,
+ MongoDB and Compute node roles.
+
+ - Click <Configure Interfaces>
+
+ - Screen Configure interfaces on number of <number of nodes> nodes is shown.
+
+ - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
+ and storage networks
+
+ Note: Set MTU level to at least MTU=1458 (recommended
+ MTU=1450 for SDN over VXLAN Usage) for each network if you
+ using ODL plugin
+
+ - Click Apply
+
+Enable ODL
+----------
+
+TODO: NOT UPDATED YET FOR WP1 - NOT AVAILABLE AT TIME OF EDIT
+
+35. In the FUEL UI of your Enviornment, click the "Settings" Tab
+
+ - Enable OpenStack debug logging (in the Common Section) - optional
+
+ - Check the OpenDaylight Lithium Plugin Section
+
+ - Check to enable VXLAN
+
+ - Modify VNI and Port Range if desired
+
+ - Click "Save Settings" at the bottom to Save.
+
+
+OPTIONAL - Set Local Mirror Repos
+---------------------------------
+
+The following steps can be executed if you are in an environment with
+no connection to the internet. The Fuel server delivers a local repo
+that can be used for installation / deployment of openstack.
+
+36. In the Fuel UI of your Environment, click the Settings Tab and
+scroll to the Repositories Section.
+
+ - Replace the URI values for the "Name" values outlined below:
+
+ - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
+ - "ubuntu-security" URI="deb
+ http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
+ - "ubuntu-updates" URI="deb
+ http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
+ - "mos-updates" URI="deb
+ http://<ip-of-fuel-server>:8080/mos-ubuntu mos6.1-updates main
+ restricted"
+ - "mos-security" URI="deb
+ http://<ip-of-fuel-server>:8080/mos-ubuntu mos6.1-security main
+ restricted"
+ - "mos-holdback" URI="deb
+ http://<ip-of-fuel-server>:8080/mos-ubuntu mos6.1-holdback main
+ restricted"
+
+ - Click "Save Settings" at the bottom to Save your changes
+
+Verify Networks
+---------------
+
+Its is important that Verify Networks be done as it will ensure that
+you can not only communicate on the networks you have setup, but can
+fetch the packages needed for a succesful deployment.
+
+37. From the FUEL UI in your Environment, Select the Networks Tab
+
+ - At the bottom of the page, Select "Verify Networks"
+
+ - Continue to fix your topology (physical switch, etc) until the
+ "Verification Succeeded - Your network is configured correctly"
+ message is shown
+
+Deploy Your Environment
+-----------------------
+
+38. Deploy the environment.
+
+ In the Fuel GUI, click on the Dashboard Tab.
+
+ - Click on 'Deploy Changes' in the 'Ready to Deploy?' Section
+
+ - Examine any information notice that pops up and click 'Deploy'
+
+ Wait for your deployment to complete, you can view the 'Dashboard'
+ Tag to see the progress and status of your deployment.
+
+Installation health-check
+=========================
+
+39. Perform system health-check
+
+ - Click the "Health Check" tab inside your Environment in the FUEL Web UI
+
+ - Check "Select All" and Click "Run Tests"
+
+ Note: Live-Migraition test will fail (Bug in ODL currently),
+ you can skip this test in the list if you choose to not see
+ the error message, simply uncheck it in the list
+
+ - Allow tests to run and investigate results where appropriate
+
+40. Verify that the OpenDaylight GUI is accessible
+
+TODO: Not available for WP1 Update at time of writing
+
+Point your browser to the following URL:
+http://{Controller-VIP}:8181/index.html> and login:
+
+ - Username: admin
+ - Password: admin
+
+References
+==========
+
+OPNFV
+-----
+
+`OPNFV Home Page <www.opnfv.org>`_
+
+`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_
+
+OpenStack
+---------
+
+`OpenStack Kilo Release artifacts <http://www.openstack.org/software/kilo>`_
+
+`OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+Fuel
+----
+
+`Fuel documentation <https://wiki.openstack.org/wiki/Fuel>`_
+
+:Authors: Daniel Smith (Ericsson AB)
+:Version: 2.0.0
+
+**Documentation tracking**
+
+Revision: _sha1_
+
+Build date: _date