diff options
Diffstat (limited to 'compass/deploy/ansible')
126 files changed, 10623 insertions, 0 deletions
diff --git a/compass/deploy/ansible/openstack_juno/HA-ansible-multinodes.yml b/compass/deploy/ansible/openstack_juno/HA-ansible-multinodes.yml new file mode 100644 index 000000000..9c1d7e7de --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/HA-ansible-multinodes.yml @@ -0,0 +1,42 @@ +--- +- hosts: all + remote_user: root + sudo: true + roles: + - repo + - common + +- hosts: ha + remote_user: root + sudo: True + roles: + - ha + +- hosts: controller + remote_user: root + sudo: True + roles: + - database + - mq + - keystone + - nova-controller + - neutron-controller + - cinder-controller + - glance + - neutron-common + - neutron-network + - dashboard + +- hosts: compute + remote_user: root + sudo: True + roles: + - nova-compute + - neutron-compute + - cinder-volume + +- hosts: all + remote_user: root + sudo: True + roles: + - monitor diff --git a/compass/deploy/ansible/openstack_juno/allinone.yml b/compass/deploy/ansible/openstack_juno/allinone.yml new file mode 100644 index 000000000..15220cac4 --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/allinone.yml @@ -0,0 +1,38 @@ +--- +- hosts: all + remote_user: root + sudo: true + roles: + - repo + +- hosts: controller + sudo: True + roles: + - common + - database + - mq + - keystone + - nova-controller + - neutron-controller + - dashboard + - cinder-controller + - glance + +- hosts: network + sudo: True + roles: + - common + - neutron-network + +- hosts: storage + sudo: True + roles: + - common + - cinder-volume + +- hosts: compute + sudo: True + roles: + - common + - nova-compute + - neutron-compute diff --git a/compass/deploy/ansible/openstack_juno/compute.yml b/compass/deploy/ansible/openstack_juno/compute.yml new file mode 100644 index 000000000..b2679c0e1 --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/compute.yml @@ -0,0 +1,9 @@ +--- +- hosts: all + remote_user: vagrant + sudo: True + roles: + - repo + - common + - nova-compute + - neutron-compute diff --git a/compass/deploy/ansible/openstack_juno/controller.yml b/compass/deploy/ansible/openstack_juno/controller.yml new file mode 100644 index 000000000..7f4a10ebb --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/controller.yml @@ -0,0 +1,15 @@ +--- +- hosts: controller + remote_user: root + sudo: True + roles: + - repo + - common + - database + - mq + - keystone + - nova-controller + - neutron-controller + - dashboard + - cinder-controller + - glance diff --git a/compass/deploy/ansible/openstack_juno/group_vars/all b/compass/deploy/ansible/openstack_juno/group_vars/all new file mode 100644 index 000000000..5643fcd9c --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/group_vars/all @@ -0,0 +1,54 @@ +controller_host: 10.1.0.11 +network_host: 10.1.0.12 +compute_host: 10.1.0.13 +storage_host: 10.1.0.14 +odl_controller: 10.1.0.15 + +DEBUG: False +VERBOSE: False +NTP_SERVER_LOCAL: controller +DB_HOST: "{{ controller_host }}" +MQ_BROKER: rabbitmq + +OPENSTACK_REPO: cloudarchive-juno.list +ADMIN_TOKEN: admin +CEILOMETER_TOKEN: c095d479023a0fd58a54 +RABBIT_PASS: guest +KEYSTONE_DBPASS: keystone_db_secret +DEMO_PASS: demo_secret +ADMIN_PASS: admin_secret +GLANCE_DBPASS: glance_db_secret +GLANCE_PASS: glance_secret +NOVA_DBPASS: nova_db_secret +NOVA_PASS: nova_secret +DASH_DBPASS: dash_db_secret +CINDER_DBPASS: cinder_db_secret +CINDER_PASS: cinder_secret +NEUTRON_DBPASS: neutron_db_secret +NEUTRON_PASS: netron_secret +NEUTRON_TYPE_DRIVERS: ['flat', 'gre', 'vxlan'] +NEUTRON_TENANT_NETWORK_TYPES: ['vxlan'] +#NEUTRON_MECHANISM_DRIVERS: ['opendaylight'] +NEUTRON_MECHANISM_DRIVERS: ['openvswitch'] +NEUTRON_TUNNEL_TYPES: ['vxlan'] +METADATA_SECRET: metadata_secret +INSTANCE_TUNNELS_INTERFACE_IP_ADDRESS: 10.1.1.21 +INTERFACE_NAME: eth2 + +EXTERNAL_NETWORK_CIDR: 203.0.113.0/24 +EXTERNAL_NETWORK_GATEWAY: 203.0.113.1 +FLOATING_IP_START: 203.0.113.101 +FLOATING_IP_END: 203.0.113.200 + +juno_cloud_archive: deb http://ubuntu-cloud.archive.canonical.com/ubuntu trusty-updates/juno main +build_in_image: http://cdn.download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img +build_in_image_name: cirros-0.3.3-x86_64-disk.img + +physical_device: /dev/sdb + +internal_interface: ansible_eth1 +internal_ip: "{{ hostvars[inventory_hostname][internal_interface]['ipv4']['address'] }}" + +odl_username: admin +odl_password: admin +odl_api_port: 8080 diff --git a/compass/deploy/ansible/openstack_juno/multinodes.yml b/compass/deploy/ansible/openstack_juno/multinodes.yml new file mode 100644 index 000000000..ffd29d576 --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/multinodes.yml @@ -0,0 +1,75 @@ +--- +- hosts: all + remote_user: root + sudo: true + roles: + - repo + +- hosts: database + sudo: True + roles: + - common + - database + +- hosts: messaging + sudo: True + roles: + - common + - mq + +- hosts: identity + sudo: True + roles: + - common + - keystone + +- hosts: compute-controller + sudo: True + roles: + - common + - nova-controller + +- hosts: network-server + sudo: True + roles: + - common + - neutron-controller + +- hosts: storage-controller + sudo: True + roles: + - common + - cinder-controller + +- hosts: image + sudo: True + roles: + - common + - glance + +- hosts: dashboard + sudo: True + roles: + - common + - dashboard + +- hosts: network-worker + sudo: True + roles: + - common + - neutron-network + +- hosts: storage-volume + sudo: True + roles: + - common + - cinder-volume + +- hosts: compute-worker + sudo: True + roles: + - common + - nova-compute + - neutron-compute + + diff --git a/compass/deploy/ansible/openstack_juno/network.yml b/compass/deploy/ansible/openstack_juno/network.yml new file mode 100644 index 000000000..558f3175d --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/network.yml @@ -0,0 +1,8 @@ +--- +- hosts: all + remote_user: vagrant + sudo: True + roles: + - repo + - common + - neutron-network diff --git a/compass/deploy/ansible/openstack_juno/single-controller.yml b/compass/deploy/ansible/openstack_juno/single-controller.yml new file mode 100644 index 000000000..15220cac4 --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/single-controller.yml @@ -0,0 +1,38 @@ +--- +- hosts: all + remote_user: root + sudo: true + roles: + - repo + +- hosts: controller + sudo: True + roles: + - common + - database + - mq + - keystone + - nova-controller + - neutron-controller + - dashboard + - cinder-controller + - glance + +- hosts: network + sudo: True + roles: + - common + - neutron-network + +- hosts: storage + sudo: True + roles: + - common + - cinder-volume + +- hosts: compute + sudo: True + roles: + - common + - nova-compute + - neutron-compute diff --git a/compass/deploy/ansible/openstack_juno/storage.yml b/compass/deploy/ansible/openstack_juno/storage.yml new file mode 100644 index 000000000..3c0aa410f --- /dev/null +++ b/compass/deploy/ansible/openstack_juno/storage.yml @@ -0,0 +1,8 @@ +--- +- hosts: all + remote_user: vagrant + sudo: True + roles: + - repo + - common + - cinder-volume diff --git a/compass/deploy/ansible/roles/cinder-controller/handlers/main.yml b/compass/deploy/ansible/roles/cinder-controller/handlers/main.yml new file mode 100644 index 000000000..ef671dd04 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/handlers/main.yml @@ -0,0 +1,6 @@ +--- +- name: restart cinder-scheduler + service: name=cinder-scheduler state=restarted enabled=yes +- name: restart cinder-api + service: name=cinder-api state=restarted enabled=yes + diff --git a/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_config.yml b/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_config.yml new file mode 100644 index 000000000..7796cf775 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_config.yml @@ -0,0 +1,20 @@ +--- +- name: sync cinder db + shell: su -s /bin/sh -c "cinder-manage db sync" cinder && cinder + register: result + until: result.rc == 0 + retries: 5 + delay: 3 + notify: + - restart cinder-scheduler + - restart cinder-api + +- meta: flush_handlers + +- name: upload cinder keystone register script + template: src=cinder_init.sh dest=/opt/cinder_init.sh mode=0744 + +- name: run cinder register script + shell: for i in {0..5}; do /opt/cinder_init.sh && touch cinder_init_complete; if [ $? != 0 ]; then sleep 5; else break; fi; done + args: + creates: cinder_init_complete diff --git a/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_install.yml b/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_install.yml new file mode 100644 index 000000000..03ad4322b --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/tasks/cinder_install.yml @@ -0,0 +1,20 @@ +--- +- name: install cinder packages + apt: name={{ item }} state=present force=yes + with_items: + - cinder-api + - cinder-scheduler + - python-cinderclient + +- name: generate cinder service list + shell: echo {{ item }} >> /opt/service + with_items: + - cinder-api + - cinder-scheduler + +- name: upload cinder conf + template: src=cinder.conf dest=/etc/cinder/cinder.conf + notify: + - restart cinder-scheduler + - restart cinder-api + diff --git a/compass/deploy/ansible/roles/cinder-controller/tasks/main.yml b/compass/deploy/ansible/roles/cinder-controller/tasks/main.yml new file mode 100644 index 000000000..1dbe91f2a --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/tasks/main.yml @@ -0,0 +1,13 @@ +--- +- include: cinder_install.yml + tags: + - install + - cinder-install + - cinder + +- include: cinder_config.yml + when: HA_CLUSTER is not defined or HA_CLUSTER[inventory_hostname] == '' + tags: + - config + - cinder-config + - cinder diff --git a/compass/deploy/ansible/roles/cinder-controller/templates/api-paste.ini b/compass/deploy/ansible/roles/cinder-controller/templates/api-paste.ini new file mode 100644 index 000000000..b568a1792 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/templates/api-paste.ini @@ -0,0 +1,71 @@ +############# +# OpenStack # +############# + +[composite:osapi_volume] +use = call:cinder.api:root_app_factory +/: apiversions +/v1: openstack_volume_api_v1 +/v2: openstack_volume_api_v2 + +[composite:openstack_volume_api_v1] +use = call:cinder.api.middleware.auth:pipeline_factory +noauth = request_id faultwrap sizelimit osprofiler noauth apiv1 +keystone = request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv1 +keystone_nolimit = request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv1 + +[composite:openstack_volume_api_v2] +use = call:cinder.api.middleware.auth:pipeline_factory +noauth = request_id faultwrap sizelimit osprofiler noauth apiv2 +keystone = request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv2 +keystone_nolimit = request_id faultwrap sizelimit osprofiler authtoken keystonecontext apiv2 + +[filter:request_id] +paste.filter_factory = cinder.openstack.common.middleware.request_id:RequestIdMiddleware.factory + +[filter:faultwrap] +paste.filter_factory = cinder.api.middleware.fault:FaultWrapper.factory + +[filter:osprofiler] +paste.filter_factory = osprofiler.web:WsgiMiddleware.factory +hmac_keys = SECRET_KEY +enabled = yes + +[filter:noauth] +paste.filter_factory = cinder.api.middleware.auth:NoAuthMiddleware.factory + +[filter:sizelimit] +paste.filter_factory = cinder.api.middleware.sizelimit:RequestBodySizeLimiter.factory + +[app:apiv1] +paste.app_factory = cinder.api.v1.router:APIRouter.factory + +[app:apiv2] +paste.app_factory = cinder.api.v2.router:APIRouter.factory + +[pipeline:apiversions] +pipeline = faultwrap osvolumeversionapp + +[app:osvolumeversionapp] +paste.app_factory = cinder.api.versions:Versions.factory + +[filter:authtoken] +paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory +# auth_host = 127.0.0.1 +# auth_port = 35357 +# auth_protocol = http +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = cinder +admin_password = {{ CINDER_PASS }} + +########## +# Shared # +########## + +[filter:keystonecontext] +paste.filter_factory = cinder.api.middleware.auth:CinderKeystoneContext.factory + +[filter:authtoken] +paste.filter_factory = keystonemiddleware.auth_token:filter_factory diff --git a/compass/deploy/ansible/roles/cinder-controller/templates/cinder.conf b/compass/deploy/ansible/roles/cinder-controller/templates/cinder.conf new file mode 100644 index 000000000..e34fd2fa0 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/templates/cinder.conf @@ -0,0 +1,63 @@ +[DEFAULT] +rootwrap_config = /etc/cinder/rootwrap.conf +api_paste_confg = /etc/cinder/api-paste.ini +iscsi_helper = tgtadm +volume_name_template = volume-%s +volume_group = cinder-volumes +verbose = {{ VERBOSE }} +debug = {{ DEBUG }} +auth_strategy = keystone +state_path = /var/lib/cinder +lock_path = /var/lock/cinder +notification_driver=cinder.openstack.common.notifier.rpc_notifier +volumes_dir = /var/lib/cinder/volumes + +log_file=/var/log/cinder/cinder.log + +control_exchange = cinder +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_port = 5672 +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +my_ip = {{ storage_controller_host }} + +glance_host = {{ HA_VIP }} +glance_port = 9292 +api_rate_limit = False +storage_availability_zone = nova + +quota_volumes = 10 +quota_gigabytes=1000 +quota_driver=cinder.quota.DbQuotaDriver + +osapi_volume_listen = {{ storage_controller_host }} +osapi_volume_listen_port = 8776 + +db_backend = sqlalchemy +volume_name_template = volume-%s +snapshot_name_template = snapshot-%s + +max_gigabytes=10000 +volume_group=cinder-volumes + +volume_clear=zero +volume_clear_size=10 + +iscsi_ip_address={{ storage_controller_host }} +iscsi_port=3260 +iscsi_helper=tgtadm + +volumes_dir=/var/lib/cinder/volumes + +volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = cinder +admin_password = {{ CINDER_PASS }} + +[database] +connection = mysql://cinder:{{ CINDER_DBPASS }}@{{ db_host }}/cinder diff --git a/compass/deploy/ansible/roles/cinder-controller/templates/cinder_init.sh b/compass/deploy/ansible/roles/cinder-controller/templates/cinder_init.sh new file mode 100644 index 000000000..0ec61b647 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-controller/templates/cinder_init.sh @@ -0,0 +1,6 @@ +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=cinder --pass={{ CINDER_PASS }} --email=cinder@example.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=cinder --tenant=service --role=admin + +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-create --name=cinder --type=volume --description="OpenStack Block Storage" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 endpoint-create --service-id=$(keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-list | awk '/ volume / {print $2}') --publicurl=http://{{ HA_VIP }}:8776/v1/%\(tenant_id\)s --internalurl=http://{{ HA_VIP }}:8776/v1/%\(tenant_id\)s --adminurl=http://{{ HA_VIP }}:8776/v1/%\(tenant_id\)s + diff --git a/compass/deploy/ansible/roles/cinder-volume/files/loop.yml b/compass/deploy/ansible/roles/cinder-volume/files/loop.yml new file mode 100644 index 000000000..e872652a0 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-volume/files/loop.yml @@ -0,0 +1 @@ +physical_device: /dev/loop0 diff --git a/compass/deploy/ansible/roles/cinder-volume/handlers/main.yml b/compass/deploy/ansible/roles/cinder-volume/handlers/main.yml new file mode 100644 index 000000000..ad917ce5c --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-volume/handlers/main.yml @@ -0,0 +1,3 @@ +--- +- name: restart cinder-volume + service: name=cinder-volume state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/cinder-volume/tasks/main.yml b/compass/deploy/ansible/roles/cinder-volume/tasks/main.yml new file mode 100644 index 000000000..8c0e626bb --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-volume/tasks/main.yml @@ -0,0 +1,55 @@ +--- +- name: install cinder-volume and lvm2 packages + apt: name={{ item }} state=present force=yes + with_items: + - cinder-volume + - lvm2 + +- name: generate cinder volume service list + shell: echo {{ item }} >> /opt/service + with_items: + - cinder-volume + +- name: check if physical device exists + stat: path={{ physical_device }} + register: st + +- name: repace physical_device if st is false + local_action: copy src=loop.yml dest=/tmp/loop.yml + when: st.stat.exists == False + +- name: load loop.yml + include_vars: /tmp/loop.yml + when: st.stat.exists == False + +- name: check if cinder-volumes is mounted + shell: ls /mnt + register: cindervolumes + +- name: get available partition size + shell: df / | awk '$3 ~ /[0-9]+/ { print $4 }' + register: partition_size + +- name: if not mounted, mount it + shell: dd if=/dev/zero of=/mnt/cinder-volumes + bs=1 count=0 seek={{ partition_size.stdout }} + when: cindervolumes.stdout != 'cinder-volumes' + +- name: get first lo device + shell: ls /dev/loop* | egrep 'loop[0-9]+'|sed -n 1p + register: first_lo + when: cindervolumes.stdout != 'cinder-volumes' + +- name: do a losetup on /mnt/cinder-volumes + shell: losetup {{ first_lo.stdout }} /mnt/cinder-volumes + when: cindervolumes.stdout != 'cinder-volumes' + +- name: create physical and group volumes + lvg: vg=cinder-volumes pvs={{ physical_device }} + vg_options=--force + +- name: upload cinder-volume configuration + template: src=cinder.conf dest=/etc/cinder/cinder.conf + backup=yes + notify: + - restart cinder-volume diff --git a/compass/deploy/ansible/roles/cinder-volume/templates/cinder.conf b/compass/deploy/ansible/roles/cinder-volume/templates/cinder.conf new file mode 100644 index 000000000..aa3b8ccd0 --- /dev/null +++ b/compass/deploy/ansible/roles/cinder-volume/templates/cinder.conf @@ -0,0 +1,62 @@ +[DEFAULT] +rootwrap_config = /etc/cinder/rootwrap.conf +api_paste_confg = /etc/cinder/api-paste.ini +iscsi_helper = tgtadm +volume_name_template = volume-%s +volume_group = cinder-volumes +verbose = True +auth_strategy = keystone +state_path = /var/lib/cinder +lock_path = /var/lock/cinder +notification_driver=cinder.openstack.common.notifier.rpc_notifier +volumes_dir = /var/lib/cinder/volumes + +log_file=/var/log/cinder/cinder.log + +control_exchange = cinder +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_port = 5672 +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +my_ip = {{ storage_controller_host }} + +glance_host = {{ HA_VIP }} +glance_port = 9292 +api_rate_limit = False +storage_availability_zone = nova + +quota_volumes = 10 +quota_gigabytes=1000 +quota_driver=cinder.quota.DbQuotaDriver + +osapi_volume_listen = {{ storage_controller_host }} +osapi_volume_listen_port = 8776 + +db_backend = sqlalchemy +volume_name_template = volume-%s +snapshot_name_template = snapshot-%s + +max_gigabytes=10000 +volume_group=cinder-volumes + +volume_clear=zero +volume_clear_size=10 + +iscsi_ip_address={{ storage_controller_host }} +iscsi_port=3260 +iscsi_helper=tgtadm + +volumes_dir=/var/lib/cinder/volumes + +volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = cinder +admin_password = {{ CINDER_PASS }} + +[database] +connection = mysql://cinder:{{ CINDER_DBPASS }}@{{ db_host }}/cinder diff --git a/compass/deploy/ansible/roles/common/files/sources.list.d/cloudarchive-juno.list b/compass/deploy/ansible/roles/common/files/sources.list.d/cloudarchive-juno.list new file mode 100644 index 000000000..920f3d237 --- /dev/null +++ b/compass/deploy/ansible/roles/common/files/sources.list.d/cloudarchive-juno.list @@ -0,0 +1 @@ +deb http://ubuntu-cloud.archive.canonical.com/ubuntu trusty-updates/juno main diff --git a/compass/deploy/ansible/roles/common/tasks/main.yml b/compass/deploy/ansible/roles/common/tasks/main.yml new file mode 100644 index 000000000..ce595f51b --- /dev/null +++ b/compass/deploy/ansible/roles/common/tasks/main.yml @@ -0,0 +1,28 @@ +--- +- name: install ubuntu-cloud-keyring(ubuntu) + apt: name={{ item }} state=latest + with_items: + - ubuntu-cloud-keyring + +- name: update hosts files to all hosts + template: src=hosts + dest=/etc/hosts + backup=yes + +- name: install common packages + apt: name={{ item }} state=latest + with_items: + - python-pip + - python-dev + - python-mysqldb + - ntp + +- name: restart ntp + command: su -s /bin/sh -c "service ntp stop; ntpd -gq; hwclock --systohc" + ignore_errors: True + +- name: update ntp conf + template: src=ntp.conf dest=/etc/ntp.conf backup=yes + +- name: restart ntp + service: name=ntp state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/common/templates/hosts b/compass/deploy/ansible/roles/common/templates/hosts new file mode 100644 index 000000000..9d27c0a9b --- /dev/null +++ b/compass/deploy/ansible/roles/common/templates/hosts @@ -0,0 +1,22 @@ +# compute-controller +10.145.89.136 host-136 +# database +10.145.89.136 host-136 +# messaging +10.145.89.136 host-136 +# storage-controller +10.145.89.138 host-138 +# image +10.145.89.138 host-138 +# identity +10.145.89.136 host-136 +# network-server +10.145.89.138 host-138 +# dashboard +10.145.89.136 host-136 +# storage-volume +10.145.89.139 host-139 +# network-worker +10.145.89.139 host-139 +# compute-worker +10.145.89.137 host-137 diff --git a/compass/deploy/ansible/roles/common/templates/ntp.conf b/compass/deploy/ansible/roles/common/templates/ntp.conf new file mode 100644 index 000000000..c61380924 --- /dev/null +++ b/compass/deploy/ansible/roles/common/templates/ntp.conf @@ -0,0 +1,56 @@ +# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help + +driftfile /var/lib/ntp/ntp.drift + + +# Enable this if you want statistics to be logged. +#statsdir /var/log/ntpstats/ + +statistics loopstats peerstats clockstats +filegen loopstats file loopstats type day enable +filegen peerstats file peerstats type day enable +filegen clockstats file clockstats type day enable + +# Specify one or more NTP servers. + +# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board +# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for +# more information. +server {{ NTP_SERVER_LOCAL }} +server 0.ubuntu.pool.ntp.org +server 1.ubuntu.pool.ntp.org +server 2.ubuntu.pool.ntp.org +server 3.ubuntu.pool.ntp.org + +# Use Ubuntu's ntp server as a fallback. +server ntp.ubuntu.com + +# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for +# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions> +# might also be helpful. +# +# Note that "restrict" applies to both servers and clients, so a configuration +# that might be intended to block requests from certain clients could also end +# up blocking replies from your own upstream servers. + +# By default, exchange time with everybody, but don't allow configuration. +restrict -4 default kod notrap nomodify nopeer noquery +restrict -6 default kod notrap nomodify nopeer noquery + +# Local users may interrogate the ntp server more closely. +restrict 127.0.0.1 +restrict ::1 + +# Clients from this (example!) subnet have unlimited access, but only if +# cryptographically authenticated. +#restrict 192.168.123.0 mask 255.255.255.0 notrust + + +# If you want to provide time to your local subnet, change the next line. +# (Again, the address is an example only.) +#broadcast 192.168.123.255 + +# If you want to listen to time broadcasts on your local subnet, de-comment the +# next lines. Please do this only if you trust everybody on the network! +#disable auth +#broadcastclient diff --git a/compass/deploy/ansible/roles/dashboard/tasks/main.yml b/compass/deploy/ansible/roles/dashboard/tasks/main.yml new file mode 100644 index 000000000..465b9969b --- /dev/null +++ b/compass/deploy/ansible/roles/dashboard/tasks/main.yml @@ -0,0 +1,30 @@ +--- +- name: install dashboard packages + apt: name={{ item }} state=present force=yes + with_items: + - apache2 + - memcached + - libapache2-mod-wsgi + - openstack-dashboard + +- name: remove ubuntu theme + apt: name=openstack-dashboard-ubuntu-theme + state=absent + +## horizon configuration is already enabled in apache2/conf-enabled +## by openstack-dashboard package deploy script. +#- name: update dashboard conf +# template: src=openstack-dashboard.conf +# dest=/etc/apache2/sites-available/openstack-dashboard.conf +# backup=yes + +- name: update horizon settings + template: src=local_settings.py + dest=/etc/openstack-dashboard/local_settings.py + backup=yes + +- name: restart apache2 + service: name=apache2 state=restarted enabled=yes + +- name: restart memcached + service: name=memcached state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/dashboard/templates/local_settings.py b/compass/deploy/ansible/roles/dashboard/templates/local_settings.py new file mode 100644 index 000000000..87e06e325 --- /dev/null +++ b/compass/deploy/ansible/roles/dashboard/templates/local_settings.py @@ -0,0 +1,511 @@ +import os + +from django.utils.translation import ugettext_lazy as _ + +from openstack_dashboard import exceptions + +DEBUG = True +TEMPLATE_DEBUG = DEBUG + +# Required for Django 1.5. +# If horizon is running in production (DEBUG is False), set this +# with the list of host/domain names that the application can serve. +# For more information see: +# https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts +#ALLOWED_HOSTS = ['horizon.example.com', ] + +# Set SSL proxy settings: +# For Django 1.4+ pass this header from the proxy after terminating the SSL, +# and don't forget to strip it from the client's request. +# For more information see: +# https://docs.djangoproject.com/en/1.4/ref/settings/#secure-proxy-ssl-header +# SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTOCOL', 'https') + +# If Horizon is being served through SSL, then uncomment the following two +# settings to better secure the cookies from security exploits +#CSRF_COOKIE_SECURE = True +#SESSION_COOKIE_SECURE = True + +# Overrides for OpenStack API versions. Use this setting to force the +# OpenStack dashboard to use a specific API version for a given service API. +# NOTE: The version should be formatted as it appears in the URL for the +# service API. For example, The identity service APIs have inconsistent +# use of the decimal point, so valid options would be "2.0" or "3". +# OPENSTACK_API_VERSIONS = { +# "identity": 3, +# "volume": 2 +# } + +# Set this to True if running on multi-domain model. When this is enabled, it +# will require user to enter the Domain name in addition to username for login. +# OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False + +# Overrides the default domain used when running on single-domain model +# with Keystone V3. All entities will be created in the default domain. +# OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default' + +# Set Console type: +# valid options would be "AUTO", "VNC", "SPICE" or "RDP" +# CONSOLE_TYPE = "AUTO" + +# Default OpenStack Dashboard configuration. +HORIZON_CONFIG = { + 'dashboards': ('project', 'admin', 'settings',), + 'default_dashboard': 'project', + 'user_home': 'openstack_dashboard.views.get_user_home', + 'ajax_queue_limit': 10, + 'auto_fade_alerts': { + 'delay': 3000, + 'fade_duration': 1500, + 'types': ['alert-success', 'alert-info'] + }, + 'help_url': "http://docs.openstack.org", + 'exceptions': {'recoverable': exceptions.RECOVERABLE, + 'not_found': exceptions.NOT_FOUND, + 'unauthorized': exceptions.UNAUTHORIZED}, +} + +# Specify a regular expression to validate user passwords. +# HORIZON_CONFIG["password_validator"] = { +# "regex": '.*', +# "help_text": _("Your password does not meet the requirements.") +# } + +# Disable simplified floating IP address management for deployments with +# multiple floating IP pools or complex network requirements. +# HORIZON_CONFIG["simple_ip_management"] = False + +# Turn off browser autocompletion for the login form if so desired. +# HORIZON_CONFIG["password_autocomplete"] = "off" + +LOCAL_PATH = os.path.dirname(os.path.abspath(__file__)) + +# Set custom secret key: +# You can either set it to a specific value or you can let horizion generate a +# default secret key that is unique on this machine, e.i. regardless of the +# amount of Python WSGI workers (if used behind Apache+mod_wsgi): However, there +# may be situations where you would want to set this explicitly, e.g. when +# multiple dashboard instances are distributed on different machines (usually +# behind a load-balancer). Either you have to make sure that a session gets all +# requests routed to the same dashboard instance or you set the same SECRET_KEY +# for all of them. +from horizon.utils import secret_key +SECRET_KEY = 'AJDSKLAJDKASJDKASJDKSAJDKSJAKDSA' +# We recommend you use memcached for development; otherwise after every reload +# of the django development server, you will have to login again. To use +# memcached set CACHES to something like +CACHES = { + 'default': { + 'BACKEND' : 'django.core.cache.backends.memcached.MemcachedCache', + 'LOCATION' : '127.0.0.1:11211', + } +} + +#CACHES = { +# 'default': { +# 'BACKEND' : 'django.core.cache.backends.locmem.LocMemCache' +# } +#} + +# Enable the Ubuntu theme if it is present. +try: + from ubuntu_theme import * +except ImportError: + pass + +# Default Ubuntu apache configuration uses /horizon as the application root. +# Configure auth redirects here accordingly. +LOGIN_URL='/horizon/auth/login/' +LOGOUT_URL='/horizon/auth/logout/' +LOGIN_REDIRECT_URL='/horizon' + +# The Ubuntu package includes pre-compressed JS and compiled CSS to allow +# offline compression by default. To enable online compression, install +# the node-less package and enable the following option. +COMPRESS_OFFLINE = True + +# By default, validation of the HTTP Host header is disabled. Production +# installations should have this set accordingly. For more information +# see https://docs.djangoproject.com/en/dev/ref/settings/. +ALLOWED_HOSTS = ['{{ dashboard_host }}'] + +# Send email to the console by default +EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend' +# Or send them to /dev/null +#EMAIL_BACKEND = 'django.core.mail.backends.dummy.EmailBackend' + +# Configure these for your outgoing email host +# EMAIL_HOST = 'smtp.my-company.com' +# EMAIL_PORT = 25 +# EMAIL_HOST_USER = 'djangomail' +# EMAIL_HOST_PASSWORD = 'top-secret!' + +# For multiple regions uncomment this configuration, and add (endpoint, title). +# AVAILABLE_REGIONS = [ +# ('http://cluster1.example.com:5000/v2.0', 'cluster1'), +# ('http://cluster2.example.com:5000/v2.0', 'cluster2'), +# ] + +OPENSTACK_HOST = "{{ HA_VIP }}" +OPENSTACK_KEYSTONE_URL = "http://%s:5000/v2.0" % OPENSTACK_HOST +OPENSTACK_KEYSTONE_DEFAULT_ROLE = "_member_" + +# Disable SSL certificate checks (useful for self-signed certificates): +# OPENSTACK_SSL_NO_VERIFY = True + +# The CA certificate to use to verify SSL connections +# OPENSTACK_SSL_CACERT = '/path/to/cacert.pem' + +# The OPENSTACK_KEYSTONE_BACKEND settings can be used to identify the +# capabilities of the auth backend for Keystone. +# If Keystone has been configured to use LDAP as the auth backend then set +# can_edit_user to False and name to 'ldap'. +# +# TODO(tres): Remove these once Keystone has an API to identify auth backend. +OPENSTACK_KEYSTONE_BACKEND = { + 'name': 'native', + 'can_edit_user': True, + 'can_edit_group': True, + 'can_edit_project': True, + 'can_edit_domain': True, + 'can_edit_role': True +} + +#Setting this to True, will add a new "Retrieve Password" action on instance, +#allowing Admin session password retrieval/decryption. +#OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False + +# The Xen Hypervisor has the ability to set the mount point for volumes +# attached to instances (other Hypervisors currently do not). Setting +# can_set_mount_point to True will add the option to set the mount point +# from the UI. +OPENSTACK_HYPERVISOR_FEATURES = { + 'can_set_mount_point': False, + 'can_set_password': False, +} + +# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional +# services provided by neutron. Options currently available are load +# balancer service, security groups, quotas, VPN service. +OPENSTACK_NEUTRON_NETWORK = { + 'enable_lb': False, + 'enable_firewall': False, + 'enable_quotas': True, + 'enable_vpn': False, + # The profile_support option is used to detect if an external router can be + # configured via the dashboard. When using specific plugins the + # profile_support can be turned on if needed. + 'profile_support': None, + #'profile_support': 'cisco', +} + +# The OPENSTACK_IMAGE_BACKEND settings can be used to customize features +# in the OpenStack Dashboard related to the Image service, such as the list +# of supported image formats. +# OPENSTACK_IMAGE_BACKEND = { +# 'image_formats': [ +# ('', ''), +# ('aki', _('AKI - Amazon Kernel Image')), +# ('ami', _('AMI - Amazon Machine Image')), +# ('ari', _('ARI - Amazon Ramdisk Image')), +# ('iso', _('ISO - Optical Disk Image')), +# ('qcow2', _('QCOW2 - QEMU Emulator')), +# ('raw', _('Raw')), +# ('vdi', _('VDI')), +# ('vhd', _('VHD')), +# ('vmdk', _('VMDK')) +# ] +# } + +# The IMAGE_CUSTOM_PROPERTY_TITLES settings is used to customize the titles for +# image custom property attributes that appear on image detail pages. +IMAGE_CUSTOM_PROPERTY_TITLES = { + "architecture": _("Architecture"), + "kernel_id": _("Kernel ID"), + "ramdisk_id": _("Ramdisk ID"), + "image_state": _("Euca2ools state"), + "project_id": _("Project ID"), + "image_type": _("Image Type") +} + +# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints +# in the Keystone service catalog. Use this setting when Horizon is running +# external to the OpenStack environment. The default is 'publicURL'. +#OPENSTACK_ENDPOINT_TYPE = "publicURL" + +# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the +# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints +# in the Keystone service catalog. Use this setting when Horizon is running +# external to the OpenStack environment. The default is None. This +# value should differ from OPENSTACK_ENDPOINT_TYPE if used. +#SECONDARY_ENDPOINT_TYPE = "publicURL" + +# The number of objects (Swift containers/objects or images) to display +# on a single page before providing a paging element (a "more" link) +# to paginate results. +API_RESULT_LIMIT = 1000 +API_RESULT_PAGE_SIZE = 20 + +# The timezone of the server. This should correspond with the timezone +# of your entire OpenStack installation, and hopefully be in UTC. +TIME_ZONE = "UTC" + +# When launching an instance, the menu of available flavors is +# sorted by RAM usage, ascending. If you would like a different sort order, +# you can provide another flavor attribute as sorting key. Alternatively, you +# can provide a custom callback method to use for sorting. You can also provide +# a flag for reverse sort. For more info, see +# http://docs.python.org/2/library/functions.html#sorted +# CREATE_INSTANCE_FLAVOR_SORT = { +# 'key': 'name', +# # or +# 'key': my_awesome_callback_method, +# 'reverse': False, +# } + +# The Horizon Policy Enforcement engine uses these values to load per service +# policy rule files. The content of these files should match the files the +# OpenStack services are using to determine role based access control in the +# target installation. + +# Path to directory containing policy.json files +#POLICY_FILES_PATH = os.path.join(ROOT_PATH, "conf") +# Map of local copy of service policy files +#POLICY_FILES = { +# 'identity': 'keystone_policy.json', +# 'compute': 'nova_policy.json', +# 'volume': 'cinder_policy.json', +# 'image': 'glance_policy.json', +#} + +# Trove user and database extension support. By default support for +# creating users and databases on database instances is turned on. +# To disable these extensions set the permission here to something +# unusable such as ["!"]. +# TROVE_ADD_USER_PERMS = [] +# TROVE_ADD_DATABASE_PERMS = [] + +LOGGING = { + 'version': 1, + # When set to True this will disable all logging except + # for loggers specified in this configuration dictionary. Note that + # if nothing is specified here and disable_existing_loggers is True, + # django.db.backends will still log unless it is disabled explicitly. + 'disable_existing_loggers': False, + 'handlers': { + 'null': { + 'level': 'DEBUG', + 'class': 'django.utils.log.NullHandler', + }, + 'console': { + # Set the level to "DEBUG" for verbose output logging. + 'level': 'INFO', + 'class': 'logging.StreamHandler', + }, + }, + 'loggers': { + # Logging from django.db.backends is VERY verbose, send to null + # by default. + 'django.db.backends': { + 'handlers': ['null'], + 'propagate': False, + }, + 'requests': { + 'handlers': ['null'], + 'propagate': False, + }, + 'horizon': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'openstack_dashboard': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'novaclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'cinderclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'keystoneclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'glanceclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'neutronclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'heatclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'ceilometerclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'troveclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'swiftclient': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'openstack_auth': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'nose.plugins.manager': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'django': { + 'handlers': ['console'], + 'level': 'DEBUG', + 'propagate': False, + }, + 'iso8601': { + 'handlers': ['null'], + 'propagate': False, + }, + } +} + +# 'direction' should not be specified for all_tcp/udp/icmp. +# It is specified in the form. +SECURITY_GROUP_RULES = { + 'all_tcp': { + 'name': 'ALL TCP', + 'ip_protocol': 'tcp', + 'from_port': '1', + 'to_port': '65535', + }, + 'all_udp': { + 'name': 'ALL UDP', + 'ip_protocol': 'udp', + 'from_port': '1', + 'to_port': '65535', + }, + 'all_icmp': { + 'name': 'ALL ICMP', + 'ip_protocol': 'icmp', + 'from_port': '-1', + 'to_port': '-1', + }, + 'ssh': { + 'name': 'SSH', + 'ip_protocol': 'tcp', + 'from_port': '22', + 'to_port': '22', + }, + 'smtp': { + 'name': 'SMTP', + 'ip_protocol': 'tcp', + 'from_port': '25', + 'to_port': '25', + }, + 'dns': { + 'name': 'DNS', + 'ip_protocol': 'tcp', + 'from_port': '53', + 'to_port': '53', + }, + 'http': { + 'name': 'HTTP', + 'ip_protocol': 'tcp', + 'from_port': '80', + 'to_port': '80', + }, + 'pop3': { + 'name': 'POP3', + 'ip_protocol': 'tcp', + 'from_port': '110', + 'to_port': '110', + }, + 'imap': { + 'name': 'IMAP', + 'ip_protocol': 'tcp', + 'from_port': '143', + 'to_port': '143', + }, + 'ldap': { + 'name': 'LDAP', + 'ip_protocol': 'tcp', + 'from_port': '389', + 'to_port': '389', + }, + 'https': { + 'name': 'HTTPS', + 'ip_protocol': 'tcp', + 'from_port': '443', + 'to_port': '443', + }, + 'smtps': { + 'name': 'SMTPS', + 'ip_protocol': 'tcp', + 'from_port': '465', + 'to_port': '465', + }, + 'imaps': { + 'name': 'IMAPS', + 'ip_protocol': 'tcp', + 'from_port': '993', + 'to_port': '993', + }, + 'pop3s': { + 'name': 'POP3S', + 'ip_protocol': 'tcp', + 'from_port': '995', + 'to_port': '995', + }, + 'ms_sql': { + 'name': 'MS SQL', + 'ip_protocol': 'tcp', + 'from_port': '1433', + 'to_port': '1433', + }, + 'mysql': { + 'name': 'MYSQL', + 'ip_protocol': 'tcp', + 'from_port': '3306', + 'to_port': '3306', + }, + 'rdp': { + 'name': 'RDP', + 'ip_protocol': 'tcp', + 'from_port': '3389', + 'to_port': '3389', + }, +} + +FLAVOR_EXTRA_KEYS = { + 'flavor_keys': [ + ('quota:read_bytes_sec', _('Quota: Read bytes')), + ('quota:write_bytes_sec', _('Quota: Write bytes')), + ('quota:cpu_quota', _('Quota: CPU')), + ('quota:cpu_period', _('Quota: CPU period')), + ('quota:inbound_average', _('Quota: Inbound average')), + ('quota:outbound_average', _('Quota: Outbound average')), + ] +} + diff --git a/compass/deploy/ansible/roles/dashboard/templates/openstack-dashboard.conf b/compass/deploy/ansible/roles/dashboard/templates/openstack-dashboard.conf new file mode 100644 index 000000000..a5a791a36 --- /dev/null +++ b/compass/deploy/ansible/roles/dashboard/templates/openstack-dashboard.conf @@ -0,0 +1,14 @@ +<VirtualHost *:80> + +WSGIScriptAlias / /usr/share/openstack-dashboard/openstack_dashboard/wsgi/django.wsgi +WSGIDaemonProcess horizon user=www-data group=www-data processes=3 threads=10 +Alias /static /usr/share/openstack-dashboard/openstack_dashboard/static/ + +<Directory /usr/share/openstack-dashboard/openstack_dashboard/wsgi> +Order allow,deny +Allow from all +</Directory> + + +</VirtualHost> + diff --git a/compass/deploy/ansible/roles/database/files/my.cnf b/compass/deploy/ansible/roles/database/files/my.cnf new file mode 100644 index 000000000..d61f94746 --- /dev/null +++ b/compass/deploy/ansible/roles/database/files/my.cnf @@ -0,0 +1,131 @@ +# +# The MySQL database server configuration file. +# +# You can copy this to one of: +# - "/etc/mysql/my.cnf" to set global options, +# - "~/.my.cnf" to set user-specific options. +# +# One can use all long options that the program supports. +# Run program with --help to get a list of available options and with +# --print-defaults to see which it would actually understand and use. +# +# For explanations see +# http://dev.mysql.com/doc/mysql/en/server-system-variables.html + +# This will be passed to all mysql clients +# It has been reported that passwords should be enclosed with ticks/quotes +# escpecially if they contain "#" chars... +# Remember to edit /etc/mysql/debian.cnf when changing the socket location. +[client] +port = 3306 +socket = /var/run/mysqld/mysqld.sock + +# Here is entries for some specific programs +# The following values assume you have at least 32M ram + +# This was formally known as [safe_mysqld]. Both versions are currently parsed. +[mysqld_safe] +socket = /var/run/mysqld/mysqld.sock +nice = 0 + +[mysqld] +# +# * Basic Settings +# +user = mysql +pid-file = /var/run/mysqld/mysqld.pid +socket = /var/run/mysqld/mysqld.sock +port = 3306 +basedir = /usr +datadir = /var/lib/mysql +tmpdir = /tmp +lc-messages-dir = /usr/share/mysql +skip-external-locking +# +# Instead of skip-networking the default is now to listen only on +# localhost which is more compatible and is not less secure. +bind-address = 0.0.0.0 +# +# * Fine Tuning +# +key_buffer = 16M +max_allowed_packet = 16M +thread_stack = 192K +thread_cache_size = 8 +# This replaces the startup script and checks MyISAM tables if needed +# the first time they are touched +myisam-recover = BACKUP +#max_connections = 100 +#table_cache = 64 +#thread_concurrency = 10 +# +# * Query Cache Configuration +# +query_cache_limit = 1M +query_cache_size = 16M +# +# * Logging and Replication +# +# Both location gets rotated by the cronjob. +# Be aware that this log type is a performance killer. +# As of 5.1 you can enable the log at runtime! +#general_log_file = /var/log/mysql/mysql.log +#general_log = 1 +# +# Error log - should be very few entries. +# +log_error = /var/log/mysql/error.log +# +# Here you can see queries with especially long duration +#log_slow_queries = /var/log/mysql/mysql-slow.log +#long_query_time = 2 +#log-queries-not-using-indexes +# +# The following can be used as easy to replay backup logs or for replication. +# note: if you are setting up a replication slave, see README.Debian about +# other settings you may need to change. +#server-id = 1 +#log_bin = /var/log/mysql/mysql-bin.log +expire_logs_days = 10 +max_binlog_size = 100M +#binlog_do_db = include_database_name +#binlog_ignore_db = include_database_name +# +# * InnoDB +# +# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. +# Read the manual for more InnoDB related options. There are many! +# +# * Security Features +# +# Read the manual, too, if you want chroot! +# chroot = /var/lib/mysql/ +# +# For generating SSL certificates I recommend the OpenSSL GUI "tinyca". +# +# ssl-ca=/etc/mysql/cacert.pem +# ssl-cert=/etc/mysql/server-cert.pem +# ssl-key=/etc/mysql/server-key.pem +default-storage-engine = innodb +innodb_file_per_table +collation-server = utf8_general_ci +init-connect = 'SET NAMES utf8' +character-set-server = utf8 + +[mysqldump] +quick +quote-names +max_allowed_packet = 16M + +[mysql] +#no-auto-rehash # faster start of mysql but no tab completition + +[isamchk] +key_buffer = 16M + +# +# * IMPORTANT: Additional settings that can override those from this file! +# The files must end with '.cnf', otherwise they'll be ignored. +# +!includedir /etc/mysql/conf.d/ + diff --git a/compass/deploy/ansible/roles/database/tasks/main.yml b/compass/deploy/ansible/roles/database/tasks/main.yml new file mode 100644 index 000000000..e66f0cd2b --- /dev/null +++ b/compass/deploy/ansible/roles/database/tasks/main.yml @@ -0,0 +1,12 @@ +--- +- name: copy data.sh + template: src=data.j2 dest=/opt/data.sh mode=777 + tags: + - mysql_user + +- include: mysql.yml + when: HA_CLUSTER is not defined + +- include: mariadb.yml + when: HA_CLUSTER is defined + diff --git a/compass/deploy/ansible/roles/database/tasks/mariadb.yml b/compass/deploy/ansible/roles/database/tasks/mariadb.yml new file mode 100644 index 000000000..093dfd11b --- /dev/null +++ b/compass/deploy/ansible/roles/database/tasks/mariadb.yml @@ -0,0 +1,46 @@ +--- +- name: install python-mysqldb + apt: name={{ item }} state=present force=yes + with_items: + - libaio1 + - libssl0.9.8 + #- mariadb-client-5.5 + - mysql-client-5.5 + - python-mysqldb + - mysql-server-wsrep + - galera + +- name: create mysql log directy + file: path=/var/log/mysql state=directory owner=mysql group=mysql mode=0755 + +- name: update mariadb my.cnf + template: src=my.cnf dest=/etc/mysql/my.cnf backup=yes + +- name: update galera wsrep.cnf + template: src=wsrep.cnf dest=/etc/mysql/conf.d/wsrep.cnf backup=yes + +- name: update wsrep_sst_rsync uid + lineinfile: dest=/usr/bin/wsrep_sst_rsync state=absent regexp="\s*uid = \$MYUID$" backup=yes + +- name: update wsrep_sst_rsync gid + lineinfile: dest=/usr/bin/wsrep_sst_rsync state=absent regexp="\s*gid = \$MYGID$" backup=yes + +- name: manually restart mysql server + service: name=mysql state=restarted enabled=yes + register: result + until: result|success + retries: 5 + delay: 5 + tags: + - mysql_restart + +- name: generate mysql service list + shell: echo {{ item }} >> /opt/service + with_items: + - mysql + +- name: create database/user + shell: /opt/data.sh + when: HA_CLUSTER[inventory_hostname] == '' + tags: + - mysql_user diff --git a/compass/deploy/ansible/roles/database/tasks/mysql.yml b/compass/deploy/ansible/roles/database/tasks/mysql.yml new file mode 100644 index 000000000..327b6566a --- /dev/null +++ b/compass/deploy/ansible/roles/database/tasks/mysql.yml @@ -0,0 +1,22 @@ +--- +- name: install mysql client and server packages + apt: name={{ item }} state=present + with_items: + - python-mysqldb + - mysql-server + +- name: create mysql log directy + file: path=/var/log/mysql state=directory owner=mysql group=mysql mode=0755 + +- name: update mysql my.cnf + copy: src=my.cnf + dest=/etc/mysql/my.cnf + backup=yes + +- name: manually restart mysql server + shell: service mysql restart + +- name: create database/user + shell: /opt/data.sh + tags: + - mysql_user diff --git a/compass/deploy/ansible/roles/database/templates/data.j2 b/compass/deploy/ansible/roles/database/templates/data.j2 new file mode 100644 index 000000000..c894b322e --- /dev/null +++ b/compass/deploy/ansible/roles/database/templates/data.j2 @@ -0,0 +1,39 @@ +#!/bin/sh +mysql -uroot -Dmysql <<EOF +drop database if exists keystone; +drop database if exists glance; +drop database if exists neutron; +drop database if exists nova; +drop database if exists cinder; + +CREATE DATABASE keystone; +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON keystone.* TO 'keystone'@'{{ host }}' IDENTIFIED BY '{{ KEYSTONE_DBPASS }}'; +{% endfor %} + +CREATE DATABASE glance; +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON glance.* TO 'glance'@'{{ host }}' IDENTIFIED BY '{{ GLANCE_DBPASS }}'; +{% endfor %} + +CREATE DATABASE neutron; +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON neutron.* TO 'neutron'@'{{ host }}' IDENTIFIED BY '{{ NEUTRON_DBPASS }}'; +{% endfor %} + +CREATE DATABASE nova; +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON nova.* TO 'nova'@'{{ host }}' IDENTIFIED BY '{{ NOVA_DBPASS }}'; +{% endfor %} + +CREATE DATABASE cinder; +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON cinder.* TO 'cinder'@'{{ host }}' IDENTIFIED BY '{{ CINDER_DBPASS }}'; +{% endfor %} + +{% if WSREP_SST_USER is defined %} +{% for host in ['%', 'localhost', inventory_hostname] %} +GRANT ALL ON *.* TO '{{ WSREP_SST_USER }}'@'{{ host }}' IDENTIFIED BY '{{ WSREP_SST_PASS }}'; +{% endfor %} +{% endif %} +EOF diff --git a/compass/deploy/ansible/roles/database/templates/my.cnf b/compass/deploy/ansible/roles/database/templates/my.cnf new file mode 100644 index 000000000..165d619ca --- /dev/null +++ b/compass/deploy/ansible/roles/database/templates/my.cnf @@ -0,0 +1,134 @@ +# +# The MySQL database server configuration file. +# +# You can copy this to one of: +# - "/etc/mysql/my.cnf" to set global options, +# - "~/.my.cnf" to set user-specific options. +# +# One can use all long options that the program supports. +# Run program with --help to get a list of available options and with +# --print-defaults to see which it would actually understand and use. +# +# For explanations see +# http://dev.mysql.com/doc/mysql/en/server-system-variables.html + +# This will be passed to all mysql clients +# It has been reported that passwords should be enclosed with ticks/quotes +# escpecially if they contain "#" chars... +# Remember to edit /etc/mysql/debian.cnf when changing the socket location. +[client] +port = 3306 +socket = /var/run/mysqld/mysqld.sock + +# Here is entries for some specific programs +# The following values assume you have at least 32M ram + +# This was formally known as [safe_mysqld]. Both versions are currently parsed. +[mysqld_safe] +socket = /var/run/mysqld/mysqld.sock +nice = 0 + +[mysqld] +# +# * Basic Settings +# +user = mysql +pid-file = /var/run/mysqld/mysqld.pid +socket = /var/run/mysqld/mysqld.sock +port = 3306 +basedir = /usr +datadir = /var/lib/mysql +tmpdir = /tmp +lc-messages-dir = /usr/share/mysql +skip-external-locking +skip-name-resolve +# +# Instead of skip-networking the default is now to listen only on +# localhost which is more compatible and is not less secure. +#bind-address = {{ hostvars[inventory_hostname]['ansible_' + INTERNAL_INTERFACE].ipv4.address }} +bind-address = {{ HA_VIP }} +# +# * Fine Tuning +# +key_buffer = 16M +max_allowed_packet = 16M +thread_stack = 192K +thread_cache_size = 8 +# This replaces the startup script and checks MyISAM tables if needed +# the first time they are touched +myisam-recover = BACKUP +max_connections = 2000 +max_connect_errors = 8000 +#table_cache = 64 +#thread_concurrency = 10 +# +# * Query Cache Configuration +# +query_cache_limit = 1M +query_cache_size = 16M +# +# * Logging and Replication +# +# Both location gets rotated by the cronjob. +# Be aware that this log type is a performance killer. +# As of 5.1 you can enable the log at runtime! +general_log_file = /var/log/mysql/mysql.log +#general_log = 1 +# +# Error log - should be very few entries. +# +log_error = /var/log/mysql/error.log +# +# Here you can see queries with especially long duration +#log_slow_queries = /var/log/mysql/mysql-slow.log +#long_query_time = 2 +#log-queries-not-using-indexes +# +# The following can be used as easy to replay backup logs or for replication. +# note: if you are setting up a replication slave, see README.Debian about +# other settings you may need to change. +#server-id = 1 +#log_bin = /var/log/mysql/mysql-bin.log +expire_logs_days = 10 +max_binlog_size = 100M +#binlog_do_db = include_database_name +#binlog_ignore_db = include_database_name +# +# * InnoDB +# +# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. +# Read the manual for more InnoDB related options. There are many! +# +# * Security Features +# +# Read the manual, too, if you want chroot! +# chroot = /var/lib/mysql/ +# +# For generating SSL certificates I recommend the OpenSSL GUI "tinyca". +# +# ssl-ca=/etc/mysql/cacert.pem +# ssl-cert=/etc/mysql/server-cert.pem +# ssl-key=/etc/mysql/server-key.pem +default-storage-engine = innodb +innodb_file_per_table +collation-server = utf8_general_ci +init-connect = 'SET NAMES utf8' +character-set-server = utf8 + +[mysqldump] +quick +quote-names +max_allowed_packet = 16M + +[mysql] +#no-auto-rehash # faster start of mysql but no tab completition + +[isamchk] +key_buffer = 16M + +# +# * IMPORTANT: Additional settings that can override those from this file! +# The files must end with '.cnf', otherwise they'll be ignored. +# +!includedir /etc/mysql/conf.d/ + diff --git a/compass/deploy/ansible/roles/database/templates/wsrep.cnf b/compass/deploy/ansible/roles/database/templates/wsrep.cnf new file mode 100644 index 000000000..b9e942451 --- /dev/null +++ b/compass/deploy/ansible/roles/database/templates/wsrep.cnf @@ -0,0 +1,126 @@ +# This file contains wsrep-related mysqld options. It should be included +# in the main MySQL configuration file. +# +# Options that need to be customized: +# - wsrep_provider +# - wsrep_cluster_address +# - wsrep_sst_auth +# The rest of defaults should work out of the box. + +## +## mysqld options _MANDATORY_ for correct opration of the cluster +## +[mysqld] + +# (This must be substituted by wsrep_format) +binlog_format=ROW + +# Currently only InnoDB storage engine is supported +default-storage-engine=innodb + +# to avoid issues with 'bulk mode inserts' using autoinc +innodb_autoinc_lock_mode=2 + +# This is a must for paralell applying +innodb_locks_unsafe_for_binlog=1 + +# Query Cache is not supported with wsrep +query_cache_size=0 +query_cache_type=0 + +# Override bind-address +# In some systems bind-address defaults to 127.0.0.1, and with mysqldump SST +# it will have (most likely) disastrous consequences on donor node +#bind-address={{ hostvars[inventory_hostname]['ansible_' + INTERNAL_INTERFACE].ipv4.address }} +bind-address={{ HA_VIP }} + +## +## WSREP options +## + +# Full path to wsrep provider library or 'none' +wsrep_provider=/usr/lib/galera/libgalera_smm.so + +# Provider specific configuration options +#wsrep_provider_options= + +# Logical cluster name. Should be the same for all nodes. +wsrep_cluster_name="my_wsrep_cluster" + +# Group communication system handle +wsrep_cluster_address=gcomm://{{ HA_CLUSTER[inventory_hostname] }} + +# Human-readable node name (non-unique). Hostname by default. +#wsrep_node_name= + +# Base replication <address|hostname>[:port] of the node. +# The values supplied will be used as defaults for state transfer receiving, +# listening ports and so on. Default: address of the first network interface. +wsrep_node_address={{ hostvars[inventory_hostname]['ansible_' + INTERNAL_INTERFACE].ipv4.address }} + +# Address for incoming client connections. Autodetect by default. +#wsrep_node_incoming_address= + +# How many threads will process writesets from other nodes +wsrep_slave_threads=1 + +# DBUG options for wsrep provider +#wsrep_dbug_option + +# Generate fake primary keys for non-PK tables (required for multi-master +# and parallel applying operation) +wsrep_certify_nonPK=1 + +# Maximum number of rows in write set +wsrep_max_ws_rows=131072 + +# Maximum size of write set +wsrep_max_ws_size=1073741824 + +# to enable debug level logging, set this to 1 +wsrep_debug=1 + +# convert locking sessions into transactions +wsrep_convert_LOCK_to_trx=0 + +# how many times to retry deadlocked autocommits +wsrep_retry_autocommit=1 + +# change auto_increment_increment and auto_increment_offset automatically +wsrep_auto_increment_control=1 + +# retry autoinc insert, which failed for duplicate key error +wsrep_drupal_282555_workaround=0 + +# enable "strictly synchronous" semantics for read operations +wsrep_causal_reads=0 + +# Command to call when node status or cluster membership changes. +# Will be passed all or some of the following options: +# --status - new status of this node +# --uuid - UUID of the cluster +# --primary - whether the component is primary or not ("yes"/"no") +# --members - comma-separated list of members +# --index - index of this node in the list +wsrep_notify_cmd= + +## +## WSREP State Transfer options +## + +# State Snapshot Transfer method +wsrep_sst_method=rsync + +# Address on THIS node to receive SST at. DON'T SET IT TO DONOR ADDRESS!!! +# (SST method dependent. Defaults to the first IP of the first interface) +#wsrep_sst_receive_address= + +# SST authentication string. This will be used to send SST to joining nodes. +# Depends on SST method. For mysqldump method it is root:<root password> +wsrep_sst_auth={{ WSREP_SST_USER }}:{{ WSREP_SST_PASS }} + +# Desired SST donor name. +#wsrep_sst_donor= + +# Protocol version to use +# wsrep_protocol_version= diff --git a/compass/deploy/ansible/roles/glance/handlers/main.yml b/compass/deploy/ansible/roles/glance/handlers/main.yml new file mode 100644 index 000000000..d8eaa44a2 --- /dev/null +++ b/compass/deploy/ansible/roles/glance/handlers/main.yml @@ -0,0 +1,6 @@ +--- +- name: restart glance-api + service: name=glance-api state=restarted enabled=yes + +- name: restart glance-registry + service: name=glance-registry state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/glance/tasks/glance_config.yml b/compass/deploy/ansible/roles/glance/tasks/glance_config.yml new file mode 100644 index 000000000..28392a3f4 --- /dev/null +++ b/compass/deploy/ansible/roles/glance/tasks/glance_config.yml @@ -0,0 +1,29 @@ +--- +- name: init glance db version + shell: glance-manage db_version_control 0 + +- name: sync glance db + shell: sleep 15; su -s /bin/sh -c "glance-manage db_sync" glance + register: result + until: result.rc == 0 + retries: 5 + delay: 3 + notify: + - restart glance-registry + - restart glance-api + +- meta: flush_handlers + +- name: place image upload script + template: src=image_upload.sh dest=/opt/image_upload.sh mode=0744 + +- name: download cirros image file + get_url: url={{ build_in_image }} dest=/opt/{{ build_in_image_name }} + +- name: wait for 9292 port to become available + wait_for: host={{ image_host }} port=9292 delay=5 + +- name: run image upload + shell: for i in {0..5}; do /opt/image_upload.sh && touch image_upload_completed; if [ $? != 0 ] ;then sleep 5; else break;fi;done + args: + creates: image_upload_completed diff --git a/compass/deploy/ansible/roles/glance/tasks/glance_install.yml b/compass/deploy/ansible/roles/glance/tasks/glance_install.yml new file mode 100644 index 000000000..505b3b089 --- /dev/null +++ b/compass/deploy/ansible/roles/glance/tasks/glance_install.yml @@ -0,0 +1,26 @@ +--- +- name: install glance packages + apt: name={{ item }} state=latest force=yes + with_items: + - glance + - python-glanceclient + +- name: generate glance service list + shell: echo {{ item }} >> /opt/service + with_items: + - glance-registry + - glance-api + +- name: update glance conf + template: src={{ item }} dest=/etc/glance/{{ item }} + backup=yes + with_items: + - glance-api.conf + - glance-registry.conf + notify: + - restart glance-registry + - restart glance-api + +- name: remove default sqlite db + shell: rm /var/lib/glance/glance.sqlite || touch glance.sqllite.db.removed + diff --git a/compass/deploy/ansible/roles/glance/tasks/main.yml b/compass/deploy/ansible/roles/glance/tasks/main.yml new file mode 100644 index 000000000..296f0dcac --- /dev/null +++ b/compass/deploy/ansible/roles/glance/tasks/main.yml @@ -0,0 +1,18 @@ +--- +- include: glance_install.yml + tags: + - install + - glance_install + - glance + +- include: nfs.yml + tags: + - nfs + +- include: glance_config.yml + when: HA_CLUSTER is not defined or HA_CLUSTER[inventory_hostname] == '' + tags: + - config + - glance_config + - glance + diff --git a/compass/deploy/ansible/roles/glance/tasks/nfs.yml b/compass/deploy/ansible/roles/glance/tasks/nfs.yml new file mode 100644 index 000000000..c03ab4d6e --- /dev/null +++ b/compass/deploy/ansible/roles/glance/tasks/nfs.yml @@ -0,0 +1,41 @@ +--- +- name: get nfs server + local_action: shell /sbin/ifconfig -a|grep inet|grep -v 127.0.0.1|grep -v inet6| grep "10" -m 1 |awk '{print $2}'|tr -d "addr:" + register: ip_info + run_once: True + +- name: install nfs + local_action: yum name=nfs-utils state=present + run_once: True + +- name: create image directory + local_action: file path=/opt/images state=directory mode=0777 + run_once: True + +- name: update nfs config + local_action: lineinfile dest=/etc/exports state=present + regexp="/opt/images *(rw,insecure,sync,all_squash)" + line="/opt/images *(rw,insecure,sync,all_squash)" + run_once: True + +- name: restart nfs service + local_action: service name=nfs state=restarted enabled=yes + run_once: True + +- name: install nfs comm + apt: name=nfs-common state=present + +- name: get mount info + command: mount + register: mount_info + +- name: mount image directory + shell: | + mount -t nfs -onfsvers=3 {{ item }}:/opt/images /var/lib/glance/images + sed -i '/\/var\/lib\/glance\/images/d' /etc/fstab + echo {{ item }}:/opt/images /var/lib/glance/images/ nfs nfsvers=3 >> /etc/fstab + when: mount_info.stdout.find('images') == -1 + with_items: + ip_info.stdout_lines + retries: 5 + delay: 3 diff --git a/compass/deploy/ansible/roles/glance/templates/glance-api.conf b/compass/deploy/ansible/roles/glance/templates/glance-api.conf new file mode 100644 index 000000000..763539ef2 --- /dev/null +++ b/compass/deploy/ansible/roles/glance/templates/glance-api.conf @@ -0,0 +1,677 @@ +[DEFAULT] +# Show more verbose log output (sets INFO log level output) +#verbose = False + +# Show debugging output in logs (sets DEBUG log level output) +#debug = False + +# Which backend scheme should Glance use by default is not specified +# in a request to add a new image to Glance? Known schemes are determined +# by the known_stores option below. +# Default: 'file' +# "default_store" option has been moved to [glance_store] section in +# Juno release + +# List of which store classes and store class locations are +# currently known to glance at startup. +# Existing but disabled stores: +# glance.store.rbd.Store, +# glance.store.s3.Store, +# glance.store.swift.Store, +# glance.store.sheepdog.Store, +# glance.store.cinder.Store, +# glance.store.gridfs.Store, +# glance.store.vmware_datastore.Store, +#known_stores = glance.store.filesystem.Store, +# glance.store.http.Store + + +# Maximum image size (in bytes) that may be uploaded through the +# Glance API server. Defaults to 1 TB. +# WARNING: this value should only be increased after careful consideration +# and must be set to a value under 8 EB (9223372036854775808). +#image_size_cap = 1099511627776 + +# Address to bind the API server +bind_host = {{ image_host }} + +# Port the bind the API server to +bind_port = 9292 + +# Log to this file. Make sure you do not set the same log file for both the API +# and registry servers! +# +# If `log_file` is omitted and `use_syslog` is false, then log messages are +# sent to stdout as a fallback. +log_file = /var/log/glance/api.log + +# Backlog requests when creating socket +backlog = 4096 + +# TCP_KEEPIDLE value in seconds when creating socket. +# Not supported on OS X. +#tcp_keepidle = 600 + +# API to use for accessing data. Default value points to sqlalchemy +# package, it is also possible to use: glance.db.registry.api +# data_api = glance.db.sqlalchemy.api + +# Number of Glance API worker processes to start. +# On machines with more than one CPU increasing this value +# may improve performance (especially if using SSL with +# compression turned on). It is typically recommended to set +# this value to the number of CPUs present on your machine. +workers = 1 + +# Maximum line size of message headers to be accepted. +# max_header_line may need to be increased when using large tokens +# (typically those generated by the Keystone v3 API with big service +# catalogs) +# max_header_line = 16384 + +# Role used to identify an authenticated user as administrator +#admin_role = admin + +# Allow unauthenticated users to access the API with read-only +# privileges. This only applies when using ContextMiddleware. +#allow_anonymous_access = False + +# Allow access to version 1 of glance api +#enable_v1_api = True + +# Allow access to version 2 of glance api +#enable_v2_api = True + +# Return the URL that references where the data is stored on +# the backend storage system. For example, if using the +# file system store a URL of 'file:///path/to/image' will +# be returned to the user in the 'direct_url' meta-data field. +# The default value is false. +#show_image_direct_url = False + +# Send headers containing user and tenant information when making requests to +# the v1 glance registry. This allows the registry to function as if a user is +# authenticated without the need to authenticate a user itself using the +# auth_token middleware. +# The default value is false. +#send_identity_headers = False + +# Supported values for the 'container_format' image attribute +#container_formats=ami,ari,aki,bare,ovf,ova + +# Supported values for the 'disk_format' image attribute +#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso + +# Directory to use for lock files. Default to a temp directory +# (string value). This setting needs to be the same for both +# glance-scrubber and glance-api. +#lock_path=<None> + +# Property Protections config file +# This file contains the rules for property protections and the roles/policies +# associated with it. +# If this config value is not specified, by default, property protections +# won't be enforced. +# If a value is specified and the file is not found, then the glance-api +# service will not start. +#property_protection_file = + +# Specify whether 'roles' or 'policies' are used in the +# property_protection_file. +# The default value for property_protection_rule_format is 'roles'. +#property_protection_rule_format = roles + +# Specifies how long (in hours) a task is supposed to live in the tasks DB +# after succeeding or failing before getting soft-deleted. +# The default value for task_time_to_live is 48 hours. +# task_time_to_live = 48 + +# This value sets what strategy will be used to determine the image location +# order. Currently two strategies are packaged with Glance 'location_order' +# and 'store_type'. +#location_strategy = location_order + +# ================= Syslog Options ============================ + +# Send logs to syslog (/dev/log) instead of to file specified +# by `log_file` +#use_syslog = False + +# Facility to use. If unset defaults to LOG_USER. +#syslog_log_facility = LOG_LOCAL0 + +# ================= SSL Options =============================== + +# Certificate file to use when starting API server securely +#cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +#key_file = /path/to/keyfile + +# CA certificate file to use to verify connecting clients +#ca_file = /path/to/cafile + +# ================= Security Options ========================== + +# AES key for encrypting store 'location' metadata, including +# -- if used -- Swift or S3 credentials +# Should be set to a random string of length 16, 24 or 32 bytes +#metadata_encryption_key = <16, 24 or 32 char registry metadata key> + +# ============ Registry Options =============================== + +# Address to find the registry server +registry_host = {{ internal_ip }} + +# Port the registry server is listening on +registry_port = 9191 + +# What protocol to use when connecting to the registry server? +# Set to https for secure HTTP communication +registry_client_protocol = http + +# The path to the key file to use in SSL connections to the +# registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file +#registry_client_key_file = /path/to/key/file + +# The path to the cert file to use in SSL connections to the +# registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file +#registry_client_cert_file = /path/to/cert/file + +# The path to the certifying authority cert file to use in SSL connections +# to the registry server, if any. Alternately, you may set the +# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file +#registry_client_ca_file = /path/to/ca/file + +# When using SSL in connections to the registry server, do not require +# validation via a certifying authority. This is the registry's equivalent of +# specifying --insecure on the command line using glanceclient for the API +# Default: False +#registry_client_insecure = False + +# The period of time, in seconds, that the API server will wait for a registry +# request to complete. A value of '0' implies no timeout. +# Default: 600 +#registry_client_timeout = 600 + +# Whether to automatically create the database tables. +# Default: False +#db_auto_create = False + +# Enable DEBUG log messages from sqlalchemy which prints every database +# query and response. +# Default: False +#sqlalchemy_debug = True + +# Pass the user's token through for API requests to the registry. +# Default: True +#use_user_token = True + +# If 'use_user_token' is not in effect then admin credentials +# can be specified. Requests to the registry on behalf of +# the API will use these credentials. +# Admin user name +#admin_user = None +# Admin password +#admin_password = None +# Admin tenant name +#admin_tenant_name = None +# Keystone endpoint +#auth_url = None +# Keystone region +#auth_region = None +# Auth strategy +#auth_strategy = keystone + +# ============ Notification System Options ===================== + +# Notifications can be sent when images are create, updated or deleted. +# There are three methods of sending notifications, logging (via the +# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid +# message queue), or noop (no notifications sent, the default) +# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver` +# notifier_strategy = default + +# Driver or drivers to handle sending notifications +# notification_driver = noop + +# Default publisher_id for outgoing notifications. +# default_publisher_id = image.localhost + +# Configuration options if sending notifications via rabbitmq (these are +# the defaults) +rabbit_host = localhost +rabbit_port = 5672 +rabbit_use_ssl = false +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +rabbit_virtual_host = / +rabbit_notification_exchange = glance +rabbit_notification_topic = notifications +rabbit_durable_queues = False + +# Configuration options if sending notifications via Qpid (these are +# the defaults) +qpid_notification_exchange = glance +qpid_notification_topic = notifications +qpid_hostname = localhost +qpid_port = 5672 +qpid_username = +qpid_password = +qpid_sasl_mechanisms = +qpid_reconnect_timeout = 0 +qpid_reconnect_limit = 0 +qpid_reconnect_interval_min = 0 +qpid_reconnect_interval_max = 0 +qpid_reconnect_interval = 0 +qpid_heartbeat = 5 +# Set to 'ssl' to enable SSL +qpid_protocol = tcp +qpid_tcp_nodelay = True + +# ============ Filesystem Store Options ======================== + +# Directory that the Filesystem backend store +# writes image data to +# this option has been moved to [glance_store] for Juno release +# filesystem_store_datadir = /var/lib/glance/images/ + +# A list of directories where image data can be stored. +# This option may be specified multiple times for specifying multiple store +# directories. Either one of filesystem_store_datadirs or +# filesystem_store_datadir option is required. A priority number may be given +# after each directory entry, separated by a ":". +# When adding an image, the highest priority directory will be selected, unless +# there is not enough space available in cases where the image size is already +# known. If no priority is given, it is assumed to be zero and the directory +# will be considered for selection last. If multiple directories have the same +# priority, then the one with the most free space available is selected. +# If same store is specified multiple times then BadStoreConfiguration +# exception will be raised. +#filesystem_store_datadirs = /var/lib/glance/images/:1 + +# A path to a JSON file that contains metadata describing the storage +# system. When show_multiple_locations is True the information in this +# file will be returned with any location that is contained in this +# store. +#filesystem_store_metadata_file = None + +# ============ Swift Store Options ============================= + +# Version of the authentication service to use +# Valid versions are '2' for keystone and '1' for swauth and rackspace +swift_store_auth_version = 2 + +# Address where the Swift authentication service lives +# Valid schemes are 'http://' and 'https://' +# If no scheme specified, default to 'https://' +# For swauth, use something like '127.0.0.1:8080/v1.0/' +swift_store_auth_address = 127.0.0.1:5000/v2.0/ + +# User to authenticate against the Swift authentication service +# If you use Swift authentication service, set it to 'account':'user' +# where 'account' is a Swift storage account and 'user' +# is a user in that account +swift_store_user = jdoe:jdoe + +# Auth key for the user authenticating against the +# Swift authentication service +swift_store_key = a86850deb2742ec3cb41518e26aa2d89 + +# Container within the account that the account should use +# for storing images in Swift +swift_store_container = glance + +# Do we create the container if it does not exist? +swift_store_create_container_on_put = False + +# What size, in MB, should Glance start chunking image files +# and do a large object manifest in Swift? By default, this is +# the maximum object size in Swift, which is 5GB +swift_store_large_object_size = 5120 + +# When doing a large object manifest, what size, in MB, should +# Glance write chunks to Swift? This amount of data is written +# to a temporary disk buffer during the process of chunking +# the image file, and the default is 200MB +swift_store_large_object_chunk_size = 200 + +# Whether to use ServiceNET to communicate with the Swift storage servers. +# (If you aren't RACKSPACE, leave this False!) +# +# To use ServiceNET for authentication, prefix hostname of +# `swift_store_auth_address` with 'snet-'. +# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/ +swift_enable_snet = False + +# If set to True enables multi-tenant storage mode which causes Glance images +# to be stored in tenant specific Swift accounts. +#swift_store_multi_tenant = False + +# A list of swift ACL strings that will be applied as both read and +# write ACLs to the containers created by Glance in multi-tenant +# mode. This grants the specified tenants/users read and write access +# to all newly created image objects. The standard swift ACL string +# formats are allowed, including: +# <tenant_id>:<username> +# <tenant_name>:<username> +# *:<username> +# Multiple ACLs can be combined using a comma separated list, for +# example: swift_store_admin_tenants = service:glance,*:admin +#swift_store_admin_tenants = + +# The region of the swift endpoint to be used for single tenant. This setting +# is only necessary if the tenant has multiple swift endpoints. +#swift_store_region = + +# If set to False, disables SSL layer compression of https swift requests. +# Setting to 'False' may improve performance for images which are already +# in a compressed format, eg qcow2. If set to True, enables SSL layer +# compression (provided it is supported by the target swift proxy). +#swift_store_ssl_compression = True + +# The number of times a Swift download will be retried before the +# request fails +#swift_store_retry_get_count = 0 + +# ============ S3 Store Options ============================= + +# Address where the S3 authentication service lives +# Valid schemes are 'http://' and 'https://' +# If no scheme specified, default to 'http://' +s3_store_host = 127.0.0.1:8080/v1.0/ + +# User to authenticate against the S3 authentication service +s3_store_access_key = <20-char AWS access key> + +# Auth key for the user authenticating against the +# S3 authentication service +s3_store_secret_key = <40-char AWS secret key> + +# Container within the account that the account should use +# for storing images in S3. Note that S3 has a flat namespace, +# so you need a unique bucket name for your glance images. An +# easy way to do this is append your AWS access key to "glance". +# S3 buckets in AWS *must* be lowercased, so remember to lowercase +# your AWS access key if you use it in your bucket name below! +s3_store_bucket = <lowercased 20-char aws access key>glance + +# Do we create the bucket if it does not exist? +s3_store_create_bucket_on_put = False + +# When sending images to S3, the data will first be written to a +# temporary buffer on disk. By default the platform's temporary directory +# will be used. If required, an alternative directory can be specified here. +#s3_store_object_buffer_dir = /path/to/dir + +# When forming a bucket url, boto will either set the bucket name as the +# subdomain or as the first token of the path. Amazon's S3 service will +# accept it as the subdomain, but Swift's S3 middleware requires it be +# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'. +#s3_store_bucket_url_format = subdomain + +# ============ RBD Store Options ============================= + +# Ceph configuration file path +# If using cephx authentication, this file should +# include a reference to the right keyring +# in a client.<USER> section +#rbd_store_ceph_conf = /etc/ceph/ceph.conf + +# RADOS user to authenticate as (only applicable if using cephx) +# If <None>, a default will be chosen based on the client. section +# in rbd_store_ceph_conf +#rbd_store_user = <None> + +# RADOS pool in which images are stored +#rbd_store_pool = images + +# RADOS images will be chunked into objects of this size (in megabytes). +# For best performance, this should be a power of two +#rbd_store_chunk_size = 8 + +# ============ Sheepdog Store Options ============================= + +sheepdog_store_address = localhost + +sheepdog_store_port = 7000 + +# Images will be chunked into objects of this size (in megabytes). +# For best performance, this should be a power of two +sheepdog_store_chunk_size = 64 + +# ============ Cinder Store Options =============================== + +# Info to match when looking for cinder in the service catalog +# Format is : separated values of the form: +# <service_type>:<service_name>:<endpoint_type> (string value) +#cinder_catalog_info = volume:cinder:publicURL + +# Override service catalog lookup with template for cinder endpoint +# e.g. http://localhost:8776/v1/%(project_id)s (string value) +#cinder_endpoint_template = <None> + +# Region name of this node (string value) +#os_region_name = <None> + +# Location of ca certicates file to use for cinder client requests +# (string value) +#cinder_ca_certificates_file = <None> + +# Number of cinderclient retries on failed http calls (integer value) +#cinder_http_retries = 3 + +# Allow to perform insecure SSL requests to cinder (boolean value) +#cinder_api_insecure = False + +# ============ VMware Datastore Store Options ===================== + +# ESX/ESXi or vCenter Server target system. +# The server value can be an IP address or a DNS name +# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com +#vmware_server_host = <None> + +# Server username (string value) +#vmware_server_username = <None> + +# Server password (string value) +#vmware_server_password = <None> + +# Inventory path to a datacenter (string value) +# Value optional when vmware_server_ip is an ESX/ESXi host: if specified +# should be `ha-datacenter`. +#vmware_datacenter_path = <None> + +# Datastore associated with the datacenter (string value) +#vmware_datastore_name = <None> + +# The number of times we retry on failures +# e.g., socket error, etc (integer value) +#vmware_api_retry_count = 10 + +# The interval used for polling remote tasks +# invoked on VMware ESX/VC server in seconds (integer value) +#vmware_task_poll_interval = 5 + +# Absolute path of the folder containing the images in the datastore +# (string value) +#vmware_store_image_dir = /openstack_glance + +# Allow to perform insecure SSL requests to the target system (boolean value) +#vmware_api_insecure = False + +# ============ Delayed Delete Options ============================= + +# Turn on/off delayed delete +delayed_delete = False + +# Delayed delete time in seconds +scrub_time = 43200 + +# Directory that the scrubber will use to remind itself of what to delete +# Make sure this is also set in glance-scrubber.conf +scrubber_datadir = /var/lib/glance/scrubber + +# =============== Quota Options ================================== + +# The maximum number of image members allowed per image +#image_member_quota = 128 + +# The maximum number of image properties allowed per image +#image_property_quota = 128 + +# The maximum number of tags allowed per image +#image_tag_quota = 128 + +# The maximum number of locations allowed per image +#image_location_quota = 10 + +# Set a system wide quota for every user. This value is the total number +# of bytes that a user can use across all storage systems. A value of +# 0 means unlimited. +#user_storage_quota = 0 + +# =============== Image Cache Options ============================= + +# Base directory that the Image Cache uses +image_cache_dir = /var/lib/glance/image-cache/ + +# =============== Manager Options ================================= + +# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE. +# Whether or not to enforce that all DB tables have charset utf8. +# If your database tables do not have charset utf8 you will +# need to convert before this option is removed. This option is +# only relevant if your database engine is MySQL. +#db_enforce_mysql_charset = True + +# =============== Glance Store ==================================== +[glance_store] +# Moved from [DEFAULT], for Juno release +default_store = file +filesystem_store_datadir = /var/lib/glance/images/ + +# =============== Database Options ================================= + +[database] +# The file name to use with SQLite (string value) +sqlite_db = /var/lib/glance/glance.sqlite + +# If True, SQLite uses synchronous mode (boolean value) +#sqlite_synchronous = True + +# The backend to use for db (string value) +# Deprecated group/name - [DEFAULT]/db_backend +backend = sqlalchemy + +# The SQLAlchemy connection string used to connect to the +# database (string value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +#connection = <None> +connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance + +# The SQL mode to be used for MySQL sessions. This option, +# including the default, overrides any server-set SQL mode. To +# use whatever SQL mode is set by the server configuration, +# set this to no value. Example: mysql_sql_mode= (string +# value) +#mysql_sql_mode = TRADITIONAL + +# Timeout before idle sql connections are reaped (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +#idle_timeout = 3600 + +# Minimum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +#min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +#max_pool_size = <None> + +# Maximum db connection retries during startup. (setting -1 +# implies an infinite retry count) (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +#max_retries = 10 + +# Interval between retries of opening a sql connection +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +#retry_interval = 10 + +# If set, use this value for max_overflow with sqlalchemy +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +#max_overflow = <None> + +# Verbosity of SQL debugging information. 0=None, +# 100=Everything (integer value) +# Deprecated group/name - [DEFAULT]/sql_connection_debug +#connection_debug = 0 + +# Add python stack traces to SQL as comment strings (boolean +# value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +#connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +# (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +#pool_timeout = <None> + +# Enable the experimental use of database reconnect on +# connection lost (boolean value) +#use_db_reconnect = False + +# seconds between db connection retries (integer value) +#db_retry_interval = 1 + +# Whether to increase interval between db connection retries, +# up to db_max_retry_interval (boolean value) +#db_inc_retry_interval = True + +# max seconds between db connection retries, if +# db_inc_retry_interval is enabled (integer value) +#db_max_retry_interval = 10 + +# maximum db connection retries before error is raised. +# (setting -1 implies an infinite retry count) (integer value) +#db_max_retries = 20 + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = glance +admin_password = {{ GLANCE_PASS }} + +[paste_deploy] +# Name of the paste configuration file that defines the available pipelines +#config_file = glance-api-paste.ini + +# Partial name of a pipeline in your paste configuration file with the +# service name removed. For example, if your paste section name is +# [pipeline:glance-api-keystone], you would configure the flavor below +# as 'keystone'. +flavor= keystone + +[store_type_location_strategy] +# The scheme list to use to get store preference order. The scheme must be +# registered by one of the stores defined by the 'known_stores' config option. +# This option will be applied when you using 'store_type' option as image +# location strategy defined by the 'location_strategy' config option. +#store_type_preference = diff --git a/compass/deploy/ansible/roles/glance/templates/glance-registry.conf b/compass/deploy/ansible/roles/glance/templates/glance-registry.conf new file mode 100644 index 000000000..8d731a24f --- /dev/null +++ b/compass/deploy/ansible/roles/glance/templates/glance-registry.conf @@ -0,0 +1,190 @@ +[DEFAULT] +# Show more verbose log output (sets INFO log level output) +#verbose = False + +# Show debugging output in logs (sets DEBUG log level output) +#debug = False + +# Address to bind the registry server +bind_host = {{ internal_ip }} + +# Port the bind the registry server to +bind_port = 9191 + +# Log to this file. Make sure you do not set the same log file for both the API +# and registry servers! +# +# If `log_file` is omitted and `use_syslog` is false, then log messages are +# sent to stdout as a fallback. +log_file = /var/log/glance/registry.log + +# Backlog requests when creating socket +backlog = 4096 + +# TCP_KEEPIDLE value in seconds when creating socket. +# Not supported on OS X. +#tcp_keepidle = 600 + +# API to use for accessing data. Default value points to sqlalchemy +# package. +#data_api = glance.db.sqlalchemy.api + +# Enable Registry API versions individually or simultaneously +#enable_v1_registry = True +#enable_v2_registry = True + +# Limit the api to return `param_limit_max` items in a call to a container. If +# a larger `limit` query param is provided, it will be reduced to this value. +api_limit_max = 1000 + +# If a `limit` query param is not provided in an api request, it will +# default to `limit_param_default` +limit_param_default = 25 + +# Role used to identify an authenticated user as administrator +#admin_role = admin + +# Whether to automatically create the database tables. +# Default: False +#db_auto_create = False + +# Enable DEBUG log messages from sqlalchemy which prints every database +# query and response. +# Default: False +#sqlalchemy_debug = True + +# ================= Syslog Options ============================ + +# Send logs to syslog (/dev/log) instead of to file specified +# by `log_file` +#use_syslog = False + +# Facility to use. If unset defaults to LOG_USER. +#syslog_log_facility = LOG_LOCAL1 + +# ================= SSL Options =============================== + +# Certificate file to use when starting registry server securely +#cert_file = /path/to/certfile + +# Private key file to use when starting registry server securely +#key_file = /path/to/keyfile + +# CA certificate file to use to verify connecting clients +#ca_file = /path/to/cafile + +# ================= Database Options ========================== + +[database] +# The file name to use with SQLite (string value) +sqlite_db = /var/lib/glance/glance.sqlite + +# If True, SQLite uses synchronous mode (boolean value) +#sqlite_synchronous = True + +# The backend to use for db (string value) +# Deprecated group/name - [DEFAULT]/db_backend +backend = sqlalchemy + +# The SQLAlchemy connection string used to connect to the +# database (string value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +#connection = <None> +connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance + +# The SQL mode to be used for MySQL sessions. This option, +# including the default, overrides any server-set SQL mode. To +# use whatever SQL mode is set by the server configuration, +# set this to no value. Example: mysql_sql_mode= (string +# value) +#mysql_sql_mode = TRADITIONAL + +# Timeout before idle sql connections are reaped (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +#idle_timeout = 3600 + +# Minimum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +#min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +#max_pool_size = <None> + +# Maximum db connection retries during startup. (setting -1 +# implies an infinite retry count) (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +#max_retries = 10 + +# Interval between retries of opening a sql connection +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +#retry_interval = 10 + +# If set, use this value for max_overflow with sqlalchemy +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +#max_overflow = <None> + +# Verbosity of SQL debugging information. 0=None, +# 100=Everything (integer value) +# Deprecated group/name - [DEFAULT]/sql_connection_debug +#connection_debug = 0 + +# Add python stack traces to SQL as comment strings (boolean +# value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +#connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +# (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +#pool_timeout = <None> + +# Enable the experimental use of database reconnect on +# connection lost (boolean value) +#use_db_reconnect = False + +# seconds between db connection retries (integer value) +#db_retry_interval = 1 + +# Whether to increase interval between db connection retries, +# up to db_max_retry_interval (boolean value) +#db_inc_retry_interval = True + +# max seconds between db connection retries, if +# db_inc_retry_interval is enabled (integer value) +#db_max_retry_interval = 10 + +# maximum db connection retries before error is raised. +# (setting -1 implies an infinite retry count) (integer value) +#db_max_retries = 20 + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = glance +admin_password = {{ GLANCE_PASS }} + +[paste_deploy] +# Name of the paste configuration file that defines the available pipelines +#config_file = glance-registry-paste.ini + +# Partial name of a pipeline in your paste configuration file with the +# service name removed. For example, if your paste section name is +# [pipeline:glance-registry-keystone], you would configure the flavor below +# as 'keystone'. +flavor= keystone diff --git a/compass/deploy/ansible/roles/glance/templates/image_upload.sh b/compass/deploy/ansible/roles/glance/templates/image_upload.sh new file mode 100644 index 000000000..9dd1fa8d3 --- /dev/null +++ b/compass/deploy/ansible/roles/glance/templates/image_upload.sh @@ -0,0 +1,2 @@ +sleep 10 +glance --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ HA_VIP }}:35357/v2.0 image-create --name="cirros" --disk-format=qcow2 --container-format=bare --is-public=true < /opt/{{ build_in_image_name }} && touch glance.import.completed diff --git a/compass/deploy/ansible/roles/ha/files/galera_chk b/compass/deploy/ansible/roles/ha/files/galera_chk new file mode 100644 index 000000000..9fd165c00 --- /dev/null +++ b/compass/deploy/ansible/roles/ha/files/galera_chk @@ -0,0 +1,10 @@ +#! /bin/sh + +code=`mysql -uroot -e "show status" | awk '/Threads_running/{print $2}'` + +if [ "$code"=="1" ] +then + echo "HTTP/1.1 200 OK\r\n" +else + echo "HTTP/1.1 503 Service Unavailable\r\n" +fi diff --git a/compass/deploy/ansible/roles/ha/files/mysqlchk b/compass/deploy/ansible/roles/ha/files/mysqlchk new file mode 100644 index 000000000..2c03f19f4 --- /dev/null +++ b/compass/deploy/ansible/roles/ha/files/mysqlchk @@ -0,0 +1,15 @@ +# default: off +# description: An xinetd internal service which echo's characters back to +# clients. +# This is the tcp version. +service mysqlchk +{ + disable = no + flags = REUSE + socket_type = stream + protocol = tcp + user = root + wait = no + server = /usr/local/bin/galera_chk + port = 9200 +} diff --git a/compass/deploy/ansible/roles/ha/files/notify.sh b/compass/deploy/ansible/roles/ha/files/notify.sh new file mode 100644 index 000000000..5edffe84b --- /dev/null +++ b/compass/deploy/ansible/roles/ha/files/notify.sh @@ -0,0 +1,4 @@ +#!/bin/bash +python /usr/local/bin/failover.py $1 +mysql -uroot -e"flush hosts" +service mysql restart diff --git a/compass/deploy/ansible/roles/ha/handlers/main.yml b/compass/deploy/ansible/roles/ha/handlers/main.yml new file mode 100644 index 000000000..a02c686bf --- /dev/null +++ b/compass/deploy/ansible/roles/ha/handlers/main.yml @@ -0,0 +1,9 @@ +--- +- name: restart haproxy + service: name=haproxy state=restarted enabled=yes + +- name: restart xinetd + service: name=xinetd state=restarted enabled=yes + +- name: restart keepalived + service: name=keepalived state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/ha/tasks/main.yml b/compass/deploy/ansible/roles/ha/tasks/main.yml new file mode 100644 index 000000000..a00c21ac4 --- /dev/null +++ b/compass/deploy/ansible/roles/ha/tasks/main.yml @@ -0,0 +1,94 @@ +--- +- name: install keepalived xinet haproxy + apt: name={{ item }} state=present + with_items: + - keepalived + - xinetd + - haproxy + +- name: generate ha service list + shell: echo {{ item }} >> /opt/service + with_items: + - keepalived + - xinetd + - haproxy + +- name: install pexpect + pip: name=pexpect state=present + +- name: activate ip_nonlocal_bind + sysctl: name=net.ipv4.ip_nonlocal_bind value=1 + state=present reload=yes + +- name: set net.ipv4.tcp_keepalive_intvl + sysctl: name=net.ipv4.tcp_keepalive_intvl value=1 + state=present reload=yes + +- name: set net.ipv4.tcp_keepalive_probes + sysctl: name=net.ipv4.tcp_keepalive_probes value=5 + state=present reload=yes + +- name: set net.ipv4.tcp_keepalive_time + sysctl: name=net.ipv4.tcp_keepalive_time value=5 + state=present reload=yes + +- name: update haproxy cfg + template: src=haproxy.cfg dest=/etc/haproxy/haproxy.cfg + notify: restart haproxy + +- name: set haproxy enable flag + lineinfile: dest=/etc/default/haproxy state=present + regexp="ENABLED=*" + line="ENABLED=1" + notify: restart haproxy + +- name: set haproxy log + lineinfile: dest=/etc/rsyslog.conf state=present + regexp="local0.* /var/log/haproxy.log" + line="local0.* /var/log/haproxy.log" + +- name: set rsyslog udp module + lineinfile: dest=/etc/rsyslog.conf state=present + regexp="^#$ModLoad imudp" + line="$ModLoad imudp" + +- name: set rsyslog udp port + lineinfile: dest=/etc/rsyslog.conf state=present + regexp="^#$UDPServerRun 514" + line="$UDPServerRun 514" + +- name: copy galera_chk file + copy: src=galera_chk dest=/usr/local/bin/galera_chk mode=0777 + +- name: copy notify file + copy: src=notify.sh dest=/usr/local/bin/notify.sh mode=0777 + +- name: copy notify template file + template: src=failover.j2 dest=/usr/local/bin/failover.py mode=0777 + +- name: add network service + lineinfile: dest=/etc/services state=present + line="mysqlchk 9200/tcp" + insertafter="Local services" + notify: restart xinetd + +- name: copy mysqlchk file + copy: src=mysqlchk dest=/etc/xinetd.d/mysqlchk mode=0777 + notify: restart xinetd + +- name: set keepalived start param + lineinfile: dest=/etc/default/keepalived state=present + regexp="^DAEMON_ARGS=*" + line="DAEMON_ARGS=\"-D -d -S 1\"" + +- name: set keepalived log + lineinfile: dest=/etc/rsyslog.conf state=present + regexp="local1.* /var/log/keepalived.log" + line="local1.* /var/log/keepalived.log" + +- name: update keepalived info + template: src=keepalived.conf dest=/etc/keepalived/keepalived.conf + notify: restart keepalived + +- name: restart rsyslog + shell: service rsyslog restart diff --git a/compass/deploy/ansible/roles/ha/templates/failover.j2 b/compass/deploy/ansible/roles/ha/templates/failover.j2 new file mode 100644 index 000000000..b03c7375d --- /dev/null +++ b/compass/deploy/ansible/roles/ha/templates/failover.j2 @@ -0,0 +1,65 @@ +import ConfigParser, os, socket +import logging as LOG +import pxssh +import sys +import re + +LOG_FILE="/var/log/mysql_failover" +try: + os.remove(LOG_FILE) +except: + pass + +LOG.basicConfig(format='%(asctime)s %(message)s', datefmt='%m/%d/%Y %I:%M:%S %p', filename=LOG_FILE,level=LOG.DEBUG) +ha_vip = {{ HA_VIP }} +LOG.info("ha_vip: %s" % ha_vip) + +#ha_vip = "10.1.0.50" +galera_path = '/etc/mysql/conf.d/wsrep.cnf' +pattern = re.compile(r"gcomm://(?P<prev_ip>.*)") + +def ssh_get_hostname(ip): + try: + s = pxssh.pxssh() + s.login("%s" % ip, "root", "root") + s.sendline('hostname') # run a command + s.prompt() # match the prompt + result = s.before.strip() # print everything before the prompt. + return result.split(os.linesep)[1] + except pxssh.ExceptionPxssh as e: + LOG.error("pxssh failed on login.") + raise + +def failover(mode): + config = ConfigParser.ConfigParser() + config.optionxform = str + config.readfp(open(galera_path)) + wsrep_cluster_address = config.get("mysqld", "wsrep_cluster_address") + wsrep_cluster_address = pattern.match(wsrep_cluster_address).groupdict()["prev_ip"] + + LOG.info("old wsrep_cluster_address = %s" % wsrep_cluster_address) + + if mode == "master": + # refresh wsrep_cluster_address to null + LOG.info("I'm being master, set wsrep_cluster_address to null") + wsrep_cluster_address = "" + + elif mode == "backup": + # refresh wsrep_cluster_address to master int ip + hostname = ssh_get_hostname(ha_vip) + wsrep_cluster_address = socket.gethostbyname(hostname) + LOG.info("I'm being slave, set wsrep_cluster_address to master internal ip") + + LOG.info("new wsrep_cluster_address = %s" % wsrep_cluster_address) + wsrep_cluster_address = "gcomm://%s" % wsrep_cluster_address + config.set("mysqld", "wsrep_cluster_address", wsrep_cluster_address) + with open(galera_path, 'wb') as fp: + #config.write(sys.stdout) + config.write(fp) + + os.system("service mysql restart") + LOG.info("failover success!!!") + +if __name__ == "__main__": + LOG.debug("call me: %s" % sys.argv) + failover(sys.argv[1]) diff --git a/compass/deploy/ansible/roles/ha/templates/haproxy.cfg b/compass/deploy/ansible/roles/ha/templates/haproxy.cfg new file mode 100644 index 000000000..4ed528ad6 --- /dev/null +++ b/compass/deploy/ansible/roles/ha/templates/haproxy.cfg @@ -0,0 +1,133 @@ + +global + #chroot /var/run/haproxy + daemon + user haproxy + group haproxy + maxconn 4000 + pidfile /var/run/haproxy/haproxy.pid + #log 127.0.0.1 local0 + tune.bufsize 1000000 + stats socket /var/run/haproxy.sock + stats timeout 2m + +defaults + log global + maxconn 8000 + option redispatch + option dontlognull + option splice-auto + timeout http-request 10s + timeout queue 1m + timeout connect 10s + timeout client 6m + timeout server 6m + timeout check 10s + retries 5 + +listen proxy-glance_registry_cluster + bind {{ HA_VIP }}:9191 + option tcpka + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:9191 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-glance_api_cluster + bind {{ HA_VIP }}:9292 + option tcpka + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:9292 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-nova-novncproxy + bind {{ HA_VIP }}:6080 + option tcpka + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:6080 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-network + bind {{ HA_VIP }}:9696 + option tcpka + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:9696 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-volume + bind {{ HA_VIP }}:8776 + option tcpka + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:8776 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-keystone_admin_cluster + bind {{ HA_VIP }}:35357 + option tcpka + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:35357 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-keystone_public_internal_cluster + bind {{ HA_VIP }}:5000 + option tcpka + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:5000 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-nova_compute_api_cluster + bind {{ HA_VIP }}:8774 + mode tcp + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:8774 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-nova_metadata_api_cluster + bind {{ HA_VIP }}:8775 + option tcpka + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:8775 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen proxy-cinder_api_cluster + bind {{ HA_VIP }}:8776 + mode tcp + option httpchk + option tcplog + balance source +{% for host in groups['controller'] %} + server {{ host }} {{ hostvars[host]['ansible_' + INTERNAL_INTERFACE].ipv4.address }}:8776 weight 1 check inter 2000 rise 2 fall 5 +{% endfor %} + +listen stats + mode http + bind 0.0.0.0:8888 + stats enable + stats refresh 30s + stats uri / + stats realm Global\ statistics + stats auth admin:admin + + diff --git a/compass/deploy/ansible/roles/ha/templates/keepalived.conf b/compass/deploy/ansible/roles/ha/templates/keepalived.conf new file mode 100644 index 000000000..0b491376e --- /dev/null +++ b/compass/deploy/ansible/roles/ha/templates/keepalived.conf @@ -0,0 +1,42 @@ +global_defs { + + notification_email{ + root@huawei.com + } + + notification_email_from keepalived@huawei.com + + smtp_server localhost + + smtp_connect_timeout 30 + + router_id NodeA + +} + +vrrp_instance VI_1 { + + interface {{ INTERNAL_INTERFACE }} + virtual_router_id 51 + state BACKUP + nopreempt + advert_int 1 +{% for host in groups['controller'] %} +{% if host == inventory_hostname %} + priority {{ 100 - loop.index0 * 5 }} +{% endif %} +{% endfor %} + + authentication { + auth_type PASS + auth_pass 1111 + } + + virtual_ipaddress { + {{ HA_VIP }} dev {{ INTERNAL_INTERFACE }} + } + + notify_master "/usr/local/bin/notify.sh master" + notify_backup "/usr/local/bin/notify.sh backup" +} + diff --git a/compass/deploy/ansible/roles/keystone/tasks/keystone_config.yml b/compass/deploy/ansible/roles/keystone/tasks/keystone_config.yml new file mode 100644 index 000000000..3203b2631 --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/tasks/keystone_config.yml @@ -0,0 +1,16 @@ +--- +- name: keystone-manage db-sync + shell: su -s /bin/sh -c "keystone-manage db_sync" + register: result + until: result.rc == 0 + retries: 5 + delay: 3 + +- name: place keystone init script under /opt/ + template: src=keystone_init dest=/opt/keystone_init mode=0744 + +- name: run keystone_init + shell: /opt/keystone_init && touch keystone_init_complete || keystone_init_failed + args: + creates: keystone_init_complete + diff --git a/compass/deploy/ansible/roles/keystone/tasks/keystone_install.yml b/compass/deploy/ansible/roles/keystone/tasks/keystone_install.yml new file mode 100644 index 000000000..e69c06954 --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/tasks/keystone_install.yml @@ -0,0 +1,29 @@ +--- +- name: install keystone packages + apt: name=keystone state=present force=yes + +- name: generate keystone service list + shell: echo {{ item }} >> /opt/service + with_items: + - keystone + +- name: update keystone conf + template: src=keystone.conf dest=/etc/keystone/keystone.conf backup=yes + +- name: delete sqlite database + shell: rm /var/lib/keystone/keystone.db || echo sqllite database already removed + +- name: cron job to purge expired tokens hourly + shell: (crontab -l -u keystone 2>&1 | grep -q token_flush) || echo '@hourly /usr/bin/keystone-manage token_flush > /var/log/keystone/keystone-tokenflush.log 2>&1' >> /var/spool/cron/crontabs/keystone + +- name: modify keystone cron rights + file: path=/var/spool/cron/crontabs/keystone mode=0600 + +- name: keystone source files + template: src={{ item }} dest=/opt/{{ item }} + with_items: + - admin-openrc.sh + - demo-openrc.sh + +- name: manually start keystone + service: name=keystone state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/keystone/tasks/main.yml b/compass/deploy/ansible/roles/keystone/tasks/main.yml new file mode 100644 index 000000000..2f36e9119 --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/tasks/main.yml @@ -0,0 +1,13 @@ +--- +- include: keystone_install.yml + tags: + - install + - keystone_install + - keystone + +- include: keystone_config.yml + when: HA_CLUSTER is not defined or HA_CLUSTER[inventory_hostname] == '' + tags: + - config + - keystone_config + - keystone diff --git a/compass/deploy/ansible/roles/keystone/templates/admin-openrc.sh b/compass/deploy/ansible/roles/keystone/templates/admin-openrc.sh new file mode 100644 index 000000000..f2e0d615b --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/templates/admin-openrc.sh @@ -0,0 +1,6 @@ +# Verify the Identity Service installation +export OS_PASSWORD={{ ADMIN_PASS }} +export OS_TENANT_NAME=admin +export OS_AUTH_URL=http://{{ HA_VIP }}:35357/v2.0 +export OS_USERNAME=ADMIN + diff --git a/compass/deploy/ansible/roles/keystone/templates/demo-openrc.sh b/compass/deploy/ansible/roles/keystone/templates/demo-openrc.sh new file mode 100644 index 000000000..8bdc51ba7 --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/templates/demo-openrc.sh @@ -0,0 +1,5 @@ +export OS_USERNAME=demo +export OS_PASSWORD={{ DEMO_PASS }} +export OS_TENANT_NAME=demo +export OS_AUTH_URL=http://{{ HA_VIP }}:35357/v2.0 + diff --git a/compass/deploy/ansible/roles/keystone/templates/keystone.conf b/compass/deploy/ansible/roles/keystone/templates/keystone.conf new file mode 100644 index 000000000..fc8bf1f1c --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/templates/keystone.conf @@ -0,0 +1,1317 @@ +[DEFAULT] + +admin_token={{ ADMIN_TOKEN }} + +public_bind_host= {{ identity_host }} + +admin_bind_host= {{ identity_host }} + +#compute_port=8774 + +#admin_port=35357 + +#public_port=5000 + +# The base public endpoint URL for keystone that are +# advertised to clients (NOTE: this does NOT affect how +# keystone listens for connections) (string value). +# Defaults to the base host URL of the request. Eg a +# request to http://server:5000/v2.0/users will +# default to http://server:5000. You should only need +# to set this value if the base URL contains a path +# (eg /prefix/v2.0) or the endpoint should be found on +# a different server. +#public_endpoint=http://localhost:%(public_port)s/ + +# The base admin endpoint URL for keystone that are advertised +# to clients (NOTE: this does NOT affect how keystone listens +# for connections) (string value). +# Defaults to the base host URL of the request. Eg a +# request to http://server:35357/v2.0/users will +# default to http://server:35357. You should only need +# to set this value if the base URL contains a path +# (eg /prefix/v2.0) or the endpoint should be found on +# a different server. +#admin_endpoint=http://localhost:%(admin_port)s/ + +# onready allows you to send a notification when the process +# is ready to serve For example, to have it notify using +# systemd, one could set shell command: "onready = systemd- +# notify --ready" or a module with notify() method: "onready = +# keystone.common.systemd". (string value) +#onready=<None> + +# enforced by optional sizelimit middleware +# (keystone.middleware:RequestBodySizeLimiter). (integer +# value) +#max_request_body_size=114688 + +# limit the sizes of user & tenant ID/names. (integer value) +#max_param_size=64 + +# similar to max_param_size, but provides an exception for +# token values. (integer value) +#max_token_size=8192 + +# During a SQL upgrade member_role_id will be used to create a +# new role that will replace records in the +# user_tenant_membership table with explicit role grants. +# After migration, the member_role_id will be used in the API +# add_user_to_project. (string value) +#member_role_id=9fe2ff9ee4384b1894a90878d3e92bab + +# During a SQL upgrade member_role_id will be used to create a +# new role that will replace records in the +# user_tenant_membership table with explicit role grants. +# After migration, member_role_name will be ignored. (string +# value) +#member_role_name=_member_ + +# The value passed as the keyword "rounds" to passlib encrypt +# method. (integer value) +#crypt_strength=40000 + +# Set this to True if you want to enable TCP_KEEPALIVE on +# server sockets i.e. sockets used by the keystone wsgi server +# for client connections. (boolean value) +#tcp_keepalive=false + +# Sets the value of TCP_KEEPIDLE in seconds for each server +# socket. Only applies if tcp_keepalive is True. Not supported +# on OS X. (integer value) +#tcp_keepidle=600 + +# The maximum number of entities that will be returned in a +# collection can be set with list_limit, with no limit set by +# default. This global limit may be then overridden for a +# specific driver, by specifying a list_limit in the +# appropriate section (e.g. [assignment]). (integer value) +#list_limit=<None> + +# Set this to false if you want to enable the ability for +# user, group and project entities to be moved between domains +# by updating their domain_id. Allowing such movement is not +# recommended if the scope of a domain admin is being +# restricted by use of an appropriate policy file (see +# policy.v3cloudsample as an example). (boolean value) +#domain_id_immutable=true + + +# +# Options defined in oslo.messaging +# + +# Use durable queues in amqp. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +#amqp_durable_queues=false + +# Auto-delete queues in amqp. (boolean value) +#amqp_auto_delete=false + +# Size of RPC connection pool. (integer value) +#rpc_conn_pool_size=30 + +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. (list value) +#allowed_rpc_exception_modules=oslo.messaging.exceptions,nova.exception,cinder.exception,exceptions +# Qpid broker hostname. (string value) +#qpid_hostname=localhost + +# Qpid broker port. (integer value) +#qpid_port=5672 + +# Qpid HA cluster host:port pairs. (list value) +#qpid_hosts=$qpid_hostname:$qpid_port + +# Username for Qpid connection. (string value) +#qpid_username= + +# Password for Qpid connection. (string value) +#qpid_password= + +# Space separated list of SASL mechanisms to use for auth. +# (string value) +#qpid_sasl_mechanisms= + +# Seconds between connection keepalive heartbeats. (integer +# value) +#qpid_heartbeat=60 + +# Transport to use, either 'tcp' or 'ssl'. (string value) +#qpid_protocol=tcp + +# Whether to disable the Nagle algorithm. (boolean value) +#qpid_tcp_nodelay=true + +# The qpid topology version to use. Version 1 is what was +# originally used by impl_qpid. Version 2 includes some +# backwards-incompatible changes that allow broker federation +# to work. Users should update to version 2 when they are +# able to take everything down, as it requires a clean break. +# (integer value) +#qpid_topology_version=1 + +# SSL version to use (valid only if SSL enabled). valid values +# are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some +# distributions. (string value) +#kombu_ssl_version= + +# SSL key file (valid only if SSL enabled). (string value) +#kombu_ssl_keyfile= + +# SSL cert file (valid only if SSL enabled). (string value) +#kombu_ssl_certfile= + +# SSL certification authority file (valid only if SSL +# enabled). (string value) +#kombu_ssl_ca_certs= + +# How long to wait before reconnecting in response to an AMQP +# consumer cancel notification. (floating point value) +#kombu_reconnect_delay=1.0 + +# The RabbitMQ broker address where a single node is used. +# (string value) +#rabbit_host=localhost + +# The RabbitMQ broker port where a single node is used. +# (integer value) +#rabbit_port=5672 + +# RabbitMQ HA cluster host:port pairs. (list value) +#rabbit_hosts=$rabbit_host:$rabbit_port + +# Connect over SSL for RabbitMQ. (boolean value) +#rabbit_use_ssl=false + +# The RabbitMQ userid. (string value) +rabbit_userid={{ RABBIT_USER }} + +# The RabbitMQ password. (string value) +rabbit_password={{ RABBIT_PASS }} + +# the RabbitMQ login method (string value) +#rabbit_login_method=AMQPLAIN + +# The RabbitMQ virtual host. (string value) +#rabbit_virtual_host=/ + +# How frequently to retry connecting with RabbitMQ. (integer +# value) +#rabbit_retry_interval=1 + +# How long to backoff for between retries when connecting to +# RabbitMQ. (integer value) +#rabbit_retry_backoff=2 + +# Maximum number of RabbitMQ connection retries. Default is 0 +# (infinite retry count). (integer value) +#rabbit_max_retries=0 + +# Use HA queues in RabbitMQ (x-ha-policy: all). If you change +# this option, you must wipe the RabbitMQ database. (boolean +# value) +#rabbit_ha_queues=false + +# If passed, use a fake RabbitMQ provider. (boolean value) +#fake_rabbit=false + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet +# interface, or IP. The "host" option should point or resolve +# to this address. (string value) +#rpc_zmq_bind_address=* + +# MatchMaker driver. (string value) +#rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost + +# ZeroMQ receiver listening port. (integer value) +#rpc_zmq_port=9501 + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +#rpc_zmq_contexts=1 + +# Maximum number of ingress messages to locally buffer per +# topic. Default is unlimited. (integer value) +#rpc_zmq_topic_backlog=<None> + +# Directory for holding IPC sockets. (string value) +#rpc_zmq_ipc_dir=/var/run/openstack + +# Name of this node. Must be a valid hostname, FQDN, or IP +# address. Must match "host" option, if running Nova. (string +# value) +#rpc_zmq_host=keystone + +# Seconds to wait before a cast expires (TTL). Only supported +# by impl_zmq. (integer value) +#rpc_cast_timeout=30 + +# Heartbeat frequency. (integer value) +#matchmaker_heartbeat_freq=300 + +# Heartbeat time-to-live. (integer value) +#matchmaker_heartbeat_ttl=600 + +# Host to locate redis. (string value) +#host=127.0.0.1 + +# Use this port to connect to redis host. (integer value) +#port=6379 + +# Password for Redis server (optional). (string value) +#password=<None> + +# Size of RPC greenthread pool. (integer value) +#rpc_thread_pool_size=64 + +# Driver or drivers to handle sending notifications. (multi +# valued) +#notification_driver= + +# AMQP topic used for OpenStack notifications. (list value) +# Deprecated group/name - [rpc_notifier2]/topics +#notification_topics=notifications + +# Seconds to wait for a response from a call. (integer value) +#rpc_response_timeout=60 + +# A URL representing the messaging driver to use and its full +# configuration. If not set, we fall back to the rpc_backend +# option and driver specific configuration. (string value) +#transport_url=<None> + +# The messaging driver to use, defaults to rabbit. Other +# drivers include qpid and zmq. (string value) +#rpc_backend=rabbit + +# The default exchange under which topics are scoped. May be +# overridden by an exchange name specified in the +# transport_url option. (string value) +#control_exchange=openstack + + +# +# Options defined in keystone.notifications +# + +# Default publisher_id for outgoing notifications (string +# value) +#default_publisher_id=<None> + + +# +# Options defined in keystone.middleware.ec2_token +# + +# URL to get token from ec2 request. (string value) +#keystone_ec2_url=http://localhost:5000/v2.0/ec2tokens + +# Required if EC2 server requires client certificate. (string +# value) +#keystone_ec2_keyfile=<None> + +# Client certificate key filename. Required if EC2 server +# requires client certificate. (string value) +#keystone_ec2_certfile=<None> + +# A PEM encoded certificate authority to use when verifying +# HTTPS connections. Defaults to the system CAs. (string +# value) +#keystone_ec2_cafile=<None> + +# Disable SSL certificate verification. (boolean value) +#keystone_ec2_insecure=false + + +# +# Options defined in keystone.openstack.common.eventlet_backdoor +# + +# Enable eventlet backdoor. Acceptable values are 0, <port>, +# and <start>:<end>, where 0 results in listening on a random +# tcp port number; <port> results in listening on the +# specified port number (and not enabling backdoor if that +# port is in use); and <start>:<end> results in listening on +# the smallest unused port number within the specified range +# of port numbers. The chosen port is displayed in the +# service's log file. (string value) +#backdoor_port=<None> + + +# +# Options defined in keystone.openstack.common.lockutils +# + +# Whether to disable inter-process locks (boolean value) +#disable_process_locking=false + +# Directory to use for lock files. (string value) +#lock_path=<None> + + +# +# Options defined in keystone.openstack.common.log +# + +# Print debugging output (set logging level to DEBUG instead +# of default WARNING level). (boolean value) +debug={{ DEBUG }} + +# Print more verbose output (set logging level to INFO instead +# of default WARNING level). (boolean value) +verbose={{ VERBOSE }} + +# Log output to standard error (boolean value) +#use_stderr=true + +# Format string to use for log messages with context (string +# value) +#logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s + +# Format string to use for log messages without context +# (string value) +#logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s + +# Data to append to log format when level is DEBUG (string +# value) +#logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d + +# Prefix each line of exception output with this format +# (string value) +#logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s + +# List of logger=LEVEL pairs (list value) +#default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN + +# Publish error events (boolean value) +#publish_errors=false + +# Make deprecations fatal (boolean value) +#fatal_deprecations=false + +# If an instance is passed with the log message, format it +# like this (string value) +#instance_format="[instance: %(uuid)s] " + +# If an instance UUID is passed with the log message, format +# it like this (string value) +#instance_uuid_format="[instance: %(uuid)s] " + +# The name of logging configuration file. It does not disable +# existing loggers, but just appends specified logging +# configuration to any other existing logging options. Please +# see the Python logging module documentation for details on +# logging configuration files. (string value) +# Deprecated group/name - [DEFAULT]/log_config +#log_config_append=<None> + +# DEPRECATED. A logging.Formatter log message format string +# which may use any of the available logging.LogRecord +# attributes. This option is deprecated. Please use +# logging_context_format_string and +# logging_default_format_string instead. (string value) +#log_format=<None> + +# Format string for %%(asctime)s in log records. Default: +# %(default)s (string value) +#log_date_format=%Y-%m-%d %H:%M:%S + +# (Optional) Name of log file to output to. If no default is +# set, logging will go to stdout. (string value) +# Deprecated group/name - [DEFAULT]/logfile +#log_file=<None> + +# (Optional) The base directory used for relative --log-file +# paths (string value) +# Deprecated group/name - [DEFAULT]/logdir +log_dir = /var/log/keystone + +# Use syslog for logging. Existing syslog format is DEPRECATED +# during I, and then will be changed in J to honor RFC5424 +# (boolean value) +#use_syslog=false + +# (Optional) Use syslog rfc5424 format for logging. If +# enabled, will add APP-NAME (RFC5424) before the MSG part of +# the syslog message. The old format without APP-NAME is +# deprecated in I, and will be removed in J. (boolean value) +#use_syslog_rfc_format=false + +# Syslog facility to receive log lines (string value) +#syslog_log_facility=LOG_USER + + +# +# Options defined in keystone.openstack.common.policy +# + +# JSON file containing policy (string value) +#policy_file=policy.json + +# Rule enforced when requested rule is not found (string +# value) +#policy_default_rule=default + + +[assignment] + +# +# Options defined in keystone +# + +# Keystone Assignment backend driver. (string value) +#driver=<None> + +# Toggle for assignment caching. This has no effect unless +# global caching is enabled. (boolean value) +#caching=true + +# TTL (in seconds) to cache assignment data. This has no +# effect unless global caching is enabled. (integer value) +#cache_time=<None> + +# Maximum number of entities that will be returned in an +# assignment collection. (integer value) +#list_limit=<None> + + +[auth] + +# +# Options defined in keystone +# + +# Default auth methods. (list value) +#methods=external,password,token + +# The password auth plugin module. (string value) +#password=keystone.auth.plugins.password.Password + +# The token auth plugin module. (string value) +#token=keystone.auth.plugins.token.Token + +# The external (REMOTE_USER) auth plugin module. (string +# value) +#external=keystone.auth.plugins.external.DefaultDomain + + +[cache] + +# +# Options defined in keystone +# + +# Prefix for building the configuration dictionary for the +# cache region. This should not need to be changed unless +# there is another dogpile.cache region with the same +# configuration name. (string value) +#config_prefix=cache.keystone + +# Default TTL, in seconds, for any cached item in the +# dogpile.cache region. This applies to any cached method that +# doesn't have an explicit cache expiration time defined for +# it. (integer value) +#expiration_time=600 + +# Dogpile.cache backend module. It is recommended that +# Memcache (dogpile.cache.memcache) or Redis +# (dogpile.cache.redis) be used in production deployments. +# Small workloads (single process) like devstack can use the +# dogpile.cache.memory backend. (string value) +#backend=keystone.common.cache.noop + +# Use a key-mangling function (sha1) to ensure fixed length +# cache-keys. This is toggle-able for debugging purposes, it +# is highly recommended to always leave this set to True. +# (boolean value) +#use_key_mangler=true + +# Arguments supplied to the backend module. Specify this +# option once per argument to be passed to the dogpile.cache +# backend. Example format: "<argname>:<value>". (multi valued) +#backend_argument= + +# Proxy Classes to import that will affect the way the +# dogpile.cache backend functions. See the dogpile.cache +# documentation on changing-backend-behavior. Comma delimited +# list e.g. my.dogpile.proxy.Class, my.dogpile.proxyClass2. +# (list value) +#proxies= + +# Global toggle for all caching using the should_cache_fn +# mechanism. (boolean value) +#enabled=false + +# Extra debugging from the cache backend (cache keys, +# get/set/delete/etc calls) This is only really useful if you +# need to see the specific cache-backend get/set/delete calls +# with the keys/values. Typically this should be left set to +# False. (boolean value) +#debug_cache_backend=false + + +[catalog] + +# +# Options defined in keystone +# + +# Catalog template file name for use with the template catalog +# backend. (string value) +#template_file=default_catalog.templates + +# Keystone catalog backend driver. (string value) +#driver=keystone.catalog.backends.sql.Catalog + +# Maximum number of entities that will be returned in a +# catalog collection. (integer value) +#list_limit=<None> + + +[credential] + +# +# Options defined in keystone +# + +# Keystone Credential backend driver. (string value) +#driver=keystone.credential.backends.sql.Credential + + +[database] + +# +# Options defined in keystone.openstack.common.db.options +# + +# The file name to use with SQLite (string value) +#sqlite_db=keystone.sqlite + +# If True, SQLite uses synchronous mode (boolean value) +#sqlite_synchronous=true + +# The backend to use for db (string value) +# Deprecated group/name - [DEFAULT]/db_backend +#backend=sqlalchemy + +# The SQLAlchemy connection string used to connect to the +# database (string value) +# Deprecated group/name - [DEFAULT]/sql_connection +# Deprecated group/name - [DATABASE]/sql_connection +# Deprecated group/name - [sql]/connection +#connection=<None> +connection = mysql://keystone:{{ KEYSTONE_DBPASS }}@{{ db_host }}/keystone + +# The SQL mode to be used for MySQL sessions. This option, +# including the default, overrides any server-set SQL mode. To +# use whatever SQL mode is set by the server configuration, +# set this to no value. Example: mysql_sql_mode= (string +# value) +#mysql_sql_mode=TRADITIONAL + +# Timeout before idle sql connections are reaped (integer +# value) +# Deprecated group/name - [DEFAULT]/sql_idle_timeout +# Deprecated group/name - [DATABASE]/sql_idle_timeout +# Deprecated group/name - [sql]/idle_timeout +#idle_timeout=3600 + +# Minimum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_min_pool_size +# Deprecated group/name - [DATABASE]/sql_min_pool_size +#min_pool_size=1 + +# Maximum number of SQL connections to keep open in a pool +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_pool_size +# Deprecated group/name - [DATABASE]/sql_max_pool_size +#max_pool_size=<None> + +# Maximum db connection retries during startup. (setting -1 +# implies an infinite retry count) (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_retries +# Deprecated group/name - [DATABASE]/sql_max_retries +#max_retries=10 + +# Interval between retries of opening a sql connection +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_retry_interval +# Deprecated group/name - [DATABASE]/reconnect_interval +#retry_interval=10 + +# If set, use this value for max_overflow with sqlalchemy +# (integer value) +# Deprecated group/name - [DEFAULT]/sql_max_overflow +# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow +#max_overflow=<None> + +# Verbosity of SQL debugging information. 0=None, +# 100=Everything (integer value) +# Deprecated group/name - [DEFAULT]/sql_connection_debug +#connection_debug=0 + +# Add python stack traces to SQL as comment strings (boolean +# value) +# Deprecated group/name - [DEFAULT]/sql_connection_trace +#connection_trace=false + +# If set, use this value for pool_timeout with sqlalchemy +# (integer value) +# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout +#pool_timeout=<None> + +# Enable the experimental use of database reconnect on +# connection lost (boolean value) +#use_db_reconnect=false + +# seconds between db connection retries (integer value) +#db_retry_interval=1 + +# Whether to increase interval between db connection retries, +# up to db_max_retry_interval (boolean value) +#db_inc_retry_interval=true + +# max seconds between db connection retries, if +# db_inc_retry_interval is enabled (integer value) +#db_max_retry_interval=10 + +# maximum db connection retries before error is raised. +# (setting -1 implies an infinite retry count) (integer value) +#db_max_retries=20 + + +[ec2] + +# +# Options defined in keystone +# + +# Keystone EC2Credential backend driver. (string value) +#driver=keystone.contrib.ec2.backends.kvs.Ec2 + + +[endpoint_filter] + +# +# Options defined in keystone +# + +# Keystone Endpoint Filter backend driver (string value) +#driver=keystone.contrib.endpoint_filter.backends.sql.EndpointFilter + +# Toggle to return all active endpoints if no filter exists. +# (boolean value) +#return_all_endpoints_if_no_filter=true + + +[federation] + +# +# Options defined in keystone +# + +# Keystone Federation backend driver. (string value) +#driver=keystone.contrib.federation.backends.sql.Federation + +# Value to be used when filtering assertion parameters from +# the environment. (string value) +#assertion_prefix= + + +[identity] + +# +# Options defined in keystone +# + +# This references the domain to use for all Identity API v2 +# requests (which are not aware of domains). A domain with +# this ID will be created for you by keystone-manage db_sync +# in migration 008. The domain referenced by this ID cannot +# be deleted on the v3 API, to prevent accidentally breaking +# the v2 API. There is nothing special about this domain, +# other than the fact that it must exist to order to maintain +# support for your v2 clients. (string value) +#default_domain_id=default + +# A subset (or all) of domains can have their own identity +# driver, each with their own partial configuration file in a +# domain configuration directory. Only values specific to the +# domain need to be placed in the domain specific +# configuration file. This feature is disabled by default; set +# to True to enable. (boolean value) +#domain_specific_drivers_enabled=false + +# Path for Keystone to locate the domain specificidentity +# configuration files if domain_specific_drivers_enabled is +# set to true. (string value) +#domain_config_dir=/etc/keystone/domains + +# Keystone Identity backend driver. (string value) +#driver=keystone.identity.backends.sql.Identity + +# Maximum supported length for user passwords; decrease to +# improve performance. (integer value) +#max_password_length=4096 + +# Maximum number of entities that will be returned in an +# identity collection. (integer value) +#list_limit=<None> + + +[kvs] + +# +# Options defined in keystone +# + +# Extra dogpile.cache backend modules to register with the +# dogpile.cache library. (list value) +#backends= + +# Prefix for building the configuration dictionary for the KVS +# region. This should not need to be changed unless there is +# another dogpile.cache region with the same configuration +# name. (string value) +#config_prefix=keystone.kvs + +# Toggle to disable using a key-mangling function to ensure +# fixed length keys. This is toggle-able for debugging +# purposes, it is highly recommended to always leave this set +# to True. (boolean value) +#enable_key_mangler=true + +# Default lock timeout for distributed locking. (integer +# value) +#default_lock_timeout=5 + + +[ldap] + +# +# Options defined in keystone +# + +# URL for connecting to the LDAP server. (string value) +#url=ldap://localhost + +# User BindDN to query the LDAP server. (string value) +#user=<None> + +# Password for the BindDN to query the LDAP server. (string +# value) +#password=<None> + +# LDAP server suffix (string value) +#suffix=cn=example,cn=com + +# If true, will add a dummy member to groups. This is required +# if the objectclass for groups requires the "member" +# attribute. (boolean value) +#use_dumb_member=false + +# DN of the "dummy member" to use when "use_dumb_member" is +# enabled. (string value) +#dumb_member=cn=dumb,dc=nonexistent + +# allow deleting subtrees. (boolean value) +#allow_subtree_delete=false + +# The LDAP scope for queries, this can be either "one" +# (onelevel/singleLevel) or "sub" (subtree/wholeSubtree). +# (string value) +#query_scope=one + +# Maximum results per page; a value of zero ("0") disables +# paging. (integer value) +#page_size=0 + +# The LDAP dereferencing option for queries. This can be +# either "never", "searching", "always", "finding" or +# "default". The "default" option falls back to using default +# dereferencing configured by your ldap.conf. (string value) +#alias_dereferencing=default + +# Override the system's default referral chasing behavior for +# queries. (boolean value) +#chase_referrals=<None> + +# Search base for users. (string value) +#user_tree_dn=<None> + +# LDAP search filter for users. (string value) +#user_filter=<None> + +# LDAP objectClass for users. (string value) +#user_objectclass=inetOrgPerson + +# LDAP attribute mapped to user id. (string value) +#user_id_attribute=cn + +# LDAP attribute mapped to user name. (string value) +#user_name_attribute=sn + +# LDAP attribute mapped to user email. (string value) +#user_mail_attribute=email + +# LDAP attribute mapped to password. (string value) +#user_pass_attribute=userPassword + +# LDAP attribute mapped to user enabled flag. (string value) +#user_enabled_attribute=enabled + +# Bitmask integer to indicate the bit that the enabled value +# is stored in if the LDAP server represents "enabled" as a +# bit on an integer rather than a boolean. A value of "0" +# indicates the mask is not used. If this is not set to "0" +# the typical value is "2". This is typically used when +# "user_enabled_attribute = userAccountControl". (integer +# value) +#user_enabled_mask=0 + +# Default value to enable users. This should match an +# appropriate int value if the LDAP server uses non-boolean +# (bitmask) values to indicate if a user is enabled or +# disabled. If this is not set to "True"the typical value is +# "512". This is typically used when "user_enabled_attribute = +# userAccountControl". (string value) +#user_enabled_default=True + +# List of attributes stripped off the user on update. (list +# value) +#user_attribute_ignore=default_project_id,tenants + +# LDAP attribute mapped to default_project_id for users. +# (string value) +#user_default_project_id_attribute=<None> + +# Allow user creation in LDAP backend. (boolean value) +#user_allow_create=true + +# Allow user updates in LDAP backend. (boolean value) +#user_allow_update=true + +# Allow user deletion in LDAP backend. (boolean value) +#user_allow_delete=true + +# If True, Keystone uses an alternative method to determine if +# a user is enabled or not by checking if they are a member of +# the "user_enabled_emulation_dn" group. (boolean value) +#user_enabled_emulation=false + +# DN of the group entry to hold enabled users when using +# enabled emulation. (string value) +#user_enabled_emulation_dn=<None> + +# List of additional LDAP attributes used for mapping +# Additional attribute mappings for users. Attribute mapping +# format is <ldap_attr>:<user_attr>, where ldap_attr is the +# attribute in the LDAP entry and user_attr is the Identity +# API attribute. (list value) +#user_additional_attribute_mapping= + +# Search base for projects (string value) +#tenant_tree_dn=<None> + +# LDAP search filter for projects. (string value) +#tenant_filter=<None> + +# LDAP objectClass for projects. (string value) +#tenant_objectclass=groupOfNames + +# LDAP attribute mapped to project id. (string value) +#tenant_id_attribute=cn + +# LDAP attribute mapped to project membership for user. +# (string value) +#tenant_member_attribute=member + +# LDAP attribute mapped to project name. (string value) +#tenant_name_attribute=ou + +# LDAP attribute mapped to project description. (string value) +#tenant_desc_attribute=description + +# LDAP attribute mapped to project enabled. (string value) +#tenant_enabled_attribute=enabled + +# LDAP attribute mapped to project domain_id. (string value) +#tenant_domain_id_attribute=businessCategory + +# List of attributes stripped off the project on update. (list +# value) +#tenant_attribute_ignore= + +# Allow tenant creation in LDAP backend. (boolean value) +#tenant_allow_create=true + +# Allow tenant update in LDAP backend. (boolean value) +#tenant_allow_update=true + +# Allow tenant deletion in LDAP backend. (boolean value) +#tenant_allow_delete=true + +# If True, Keystone uses an alternative method to determine if +# a project is enabled or not by checking if they are a member +# of the "tenant_enabled_emulation_dn" group. (boolean value) +#tenant_enabled_emulation=false + +# DN of the group entry to hold enabled projects when using +# enabled emulation. (string value) +#tenant_enabled_emulation_dn=<None> + +# Additional attribute mappings for projects. Attribute +# mapping format is <ldap_attr>:<user_attr>, where ldap_attr +# is the attribute in the LDAP entry and user_attr is the +# Identity API attribute. (list value) +#tenant_additional_attribute_mapping= + +# Search base for roles. (string value) +#role_tree_dn=<None> + +# LDAP search filter for roles. (string value) +#role_filter=<None> + +# LDAP objectClass for roles. (string value) +#role_objectclass=organizationalRole + +# LDAP attribute mapped to role id. (string value) +#role_id_attribute=cn + +# LDAP attribute mapped to role name. (string value) +#role_name_attribute=ou + +# LDAP attribute mapped to role membership. (string value) +#role_member_attribute=roleOccupant + +# List of attributes stripped off the role on update. (list +# value) +#role_attribute_ignore= + +# Allow role creation in LDAP backend. (boolean value) +#role_allow_create=true + +# Allow role update in LDAP backend. (boolean value) +#role_allow_update=true + +# Allow role deletion in LDAP backend. (boolean value) +#role_allow_delete=true + +# Additional attribute mappings for roles. Attribute mapping +# format is <ldap_attr>:<user_attr>, where ldap_attr is the +# attribute in the LDAP entry and user_attr is the Identity +# API attribute. (list value) +#role_additional_attribute_mapping= + +# Search base for groups. (string value) +#group_tree_dn=<None> + +# LDAP search filter for groups. (string value) +#group_filter=<None> + +# LDAP objectClass for groups. (string value) +#group_objectclass=groupOfNames + +# LDAP attribute mapped to group id. (string value) +#group_id_attribute=cn + +# LDAP attribute mapped to group name. (string value) +#group_name_attribute=ou + +# LDAP attribute mapped to show group membership. (string +# value) +#group_member_attribute=member + +# LDAP attribute mapped to group description. (string value) +#group_desc_attribute=description + +# List of attributes stripped off the group on update. (list +# value) +#group_attribute_ignore= + +# Allow group creation in LDAP backend. (boolean value) +#group_allow_create=true + +# Allow group update in LDAP backend. (boolean value) +#group_allow_update=true + +# Allow group deletion in LDAP backend. (boolean value) +#group_allow_delete=true + +# Additional attribute mappings for groups. Attribute mapping +# format is <ldap_attr>:<user_attr>, where ldap_attr is the +# attribute in the LDAP entry and user_attr is the Identity +# API attribute. (list value) +#group_additional_attribute_mapping= + +# CA certificate file path for communicating with LDAP +# servers. (string value) +#tls_cacertfile=<None> + +# CA certificate directory path for communicating with LDAP +# servers. (string value) +#tls_cacertdir=<None> + +# Enable TLS for communicating with LDAP servers. (boolean +# value) +#use_tls=false + +# valid options for tls_req_cert are demand, never, and allow. +# (string value) +#tls_req_cert=demand + + +[matchmaker_ring] + +# +# Options defined in oslo.messaging +# + +# Matchmaker ring file (JSON). (string value) +# Deprecated group/name - [DEFAULT]/matchmaker_ringfile +#ringfile=/etc/oslo/matchmaker_ring.json + + +[memcache] + +# +# Options defined in keystone +# + +# Memcache servers in the format of "host:port" (list value) +#servers=localhost:11211 + +# Number of compare-and-set attempts to make when using +# compare-and-set in the token memcache back end. (integer +# value) +#max_compare_and_set_retry=16 + + +[oauth1] + +# +# Options defined in keystone +# + +# Keystone Credential backend driver. (string value) +#driver=keystone.contrib.oauth1.backends.sql.OAuth1 + +# Duration (in seconds) for the OAuth Request Token. (integer +# value) +#request_token_duration=28800 + +# Duration (in seconds) for the OAuth Access Token. (integer +# value) +#access_token_duration=86400 + + +[os_inherit] + +# +# Options defined in keystone +# + +# role-assignment inheritance to projects from owning domain +# can be optionally enabled. (boolean value) +#enabled=false + + +[paste_deploy] + +# +# Options defined in keystone +# + +# Name of the paste configuration file that defines the +# available pipelines. (string value) +#config_file=keystone-paste.ini + + +[policy] + +# +# Options defined in keystone +# + +# Keystone Policy backend driver. (string value) +#driver=keystone.policy.backends.sql.Policy + +# Maximum number of entities that will be returned in a policy +# collection. (integer value) +#list_limit=<None> + + +[revoke] + +# +# Options defined in keystone +# + +# An implementation of the backend for persisting revocation +# events. (string value) +#driver=keystone.contrib.revoke.backends.kvs.Revoke + +# This value (calculated in seconds) is added to token +# expiration before a revocation event may be removed from the +# backend. (integer value) +#expiration_buffer=1800 + +# Toggle for revocation event cacheing. This has no effect +# unless global caching is enabled. (boolean value) +#caching=true + + +[signing] + +# +# Options defined in keystone +# + +# Deprecated in favor of provider in the [token] section. +# (string value) +#token_format=<None> + +# Path of the certfile for token signing. (string value) +#certfile=/etc/keystone/ssl/certs/signing_cert.pem + +# Path of the keyfile for token signing. (string value) +#keyfile=/etc/keystone/ssl/private/signing_key.pem + +# Path of the CA for token signing. (string value) +#ca_certs=/etc/keystone/ssl/certs/ca.pem + +# Path of the CA Key for token signing. (string value) +#ca_key=/etc/keystone/ssl/private/cakey.pem + +# Key Size (in bits) for token signing cert (auto generated +# certificate). (integer value) +#key_size=2048 + +# Day the token signing cert is valid for (auto generated +# certificate). (integer value) +#valid_days=3650 + +# Certificate Subject (auto generated certificate) for token +# signing. (string value) +#cert_subject=/C=US/ST=Unset/L=Unset/O=Unset/CN=www.example.com + + +[ssl] + +# +# Options defined in keystone +# + +# Toggle for SSL support on the keystone eventlet servers. +# (boolean value) +#enable=false + +# Path of the certfile for SSL. (string value) +#certfile=/etc/keystone/ssl/certs/keystone.pem + +# Path of the keyfile for SSL. (string value) +#keyfile=/etc/keystone/ssl/private/keystonekey.pem + +# Path of the ca cert file for SSL. (string value) +#ca_certs=/etc/keystone/ssl/certs/ca.pem + +# Path of the CA key file for SSL. (string value) +#ca_key=/etc/keystone/ssl/private/cakey.pem + +# Require client certificate. (boolean value) +#cert_required=false + +# SSL Key Length (in bits) (auto generated certificate). +# (integer value) +#key_size=1024 + +# Days the certificate is valid for once signed (auto +# generated certificate). (integer value) +#valid_days=3650 + +# SSL Certificate Subject (auto generated certificate). +# (string value) +#cert_subject=/C=US/ST=Unset/L=Unset/O=Unset/CN=localhost + + +[stats] + +# +# Options defined in keystone +# + +# Keystone stats backend driver. (string value) +#driver=keystone.contrib.stats.backends.kvs.Stats + + +[token] + +# +# Options defined in keystone +# + +# External auth mechanisms that should add bind information to +# token e.g. kerberos, x509. (list value) +#bind= + +# Enforcement policy on tokens presented to keystone with bind +# information. One of disabled, permissive, strict, required +# or a specifically required bind mode e.g. kerberos or x509 +# to require binding to that authentication. (string value) +#enforce_token_bind=permissive + +# Amount of time a token should remain valid (in seconds). +# (integer value) +#expiration=3600 + +# Controls the token construction, validation, and revocation +# operations. Core providers are +# "keystone.token.providers.[pki|uuid].Provider". (string +# value) +provider=keystone.token.providers.uuid.Provider + +# Keystone Token persistence backend driver. (string value) +driver=keystone.token.persistence.backends.sql.Token + +# Toggle for token system cacheing. This has no effect unless +# global caching is enabled. (boolean value) +#caching=true + +# Time to cache the revocation list and the revocation events +# if revoke extension is enabled (in seconds). This has no +# effect unless global and token caching are enabled. (integer +# value) +revocation_cache_time=3600 + +# Time to cache tokens (in seconds). This has no effect unless +# global and token caching are enabled. (integer value) +#cache_time=<None> + +# Revoke token by token identifier. Setting revoke_by_id to +# True enables various forms of enumerating tokens, e.g. `list +# tokens for user`. These enumerations are processed to +# determine the list of tokens to revoke. Only disable if +# you are switching to using the Revoke extension with a +# backend other than KVS, which stores events in memory. +# (boolean value) +#revoke_by_id=true + + +[trust] + +# +# Options defined in keystone +# + +# delegation and impersonation features can be optionally +# disabled. (boolean value) +#enabled=true + +# Keystone Trust backend driver. (string value) +#driver=keystone.trust.backends.sql.Trust + + +[extra_headers] +Distribution = Ubuntu + diff --git a/compass/deploy/ansible/roles/keystone/templates/keystone_init b/compass/deploy/ansible/roles/keystone/templates/keystone_init new file mode 100644 index 000000000..729669bfb --- /dev/null +++ b/compass/deploy/ansible/roles/keystone/templates/keystone_init @@ -0,0 +1,43 @@ +# create an administrative user + +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=admin --pass={{ ADMIN_PASS }} --email=admin@admin.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 role-create --name=admin +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=admin --pass={{ ADMIN_PASS }} --email=admin@admin.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 tenant-create --name=admin --description="Admin Tenant" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=admin --tenant=admin --role=admin +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=admin --role=_member_ --tenant=admin + +# create a normal user + +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=demo --pass={{ DEMO_PASS }} --email=DEMO_EMAIL +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 tenant-create --name=demo --description="Demo Tenant" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=demo --role=_member_ --tenant=demo + +# create a service tenant +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 tenant-create --name=service --description="Service Tenant" + +# regist keystone +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-create --name=keystone --type=identity --description="OpenStack Identity" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 endpoint-create --service_id=$(keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-list | awk '/ identity / {print $2}') --publicurl=http://{{ HA_VIP }}:5000/v2.0 --internalurl=http://{{ HA_VIP }}:5000/v2.0 --adminurl=http://{{ HA_VIP }}:35357/v2.0 + +# Create a glance user that the Image Service can use to authenticate with the Identity service +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=glance --pass={{ GLANCE_PASS }} --email=glance@example.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=glance --tenant=service --role=admin + +#Register the Image Service with the Identity service so that other OpenStack services can locate it +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-create --name=glance --type=image --description="OpenStack Image Service" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 endpoint-create --service-id=$(keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-list | awk '/ image / {print $2}') --publicurl=http://{{ HA_VIP }}:9292 --internalurl=http://{{ HA_VIP }}:9292 --adminurl=http://{{ HA_VIP }}:9292 + +#Create a nova user that Compute uses to authenticate with the Identity Service +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name=nova --pass={{ NOVA_PASS }} --email=nova@example.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user=nova --tenant=service --role=admin + +# register Compute with the Identity Service so that other OpenStack services can locate it +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-create --name=nova --type=compute --description="OpenStack Compute" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 endpoint-create --service-id=$(keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-list | awk '/ compute / {print $2}') --publicurl=http://{{ HA_VIP }}:8774/v2/%\(tenant_id\)s --internalurl=http://{{ HA_VIP }}:8774/v2/%\(tenant_id\)s --adminurl=http://{{ HA_VIP }}:8774/v2/%\(tenant_id\)s + +# register netron user, role and service +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-create --name neutron --pass {{ NEUTRON_PASS }} --email neutron@example.com +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 user-role-add --user neutron --tenant service --role admin +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-create --name neutron --type network --description "OpenStack Networking" +keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 endpoint-create --service-id $(keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 service-list | awk '/ network / {print $2}') --publicurl http://{{ HA_VIP }}:9696 --adminurl http://{{ HA_VIP }}:9696 --internalurl http://{{ HA_VIP }}:9696 diff --git a/compass/deploy/ansible/roles/monitor/files/check_service.sh b/compass/deploy/ansible/roles/monitor/files/check_service.sh new file mode 100644 index 000000000..d30967343 --- /dev/null +++ b/compass/deploy/ansible/roles/monitor/files/check_service.sh @@ -0,0 +1,7 @@ +#!/bin/bash +services=`cat /opt/service | uniq` +for service in $services; do + if [ `/sbin/initctl list|awk '/stop\/waiting/{print $1}'|uniq | grep $service` ]; then + /sbin/start $service + fi +done diff --git a/compass/deploy/ansible/roles/monitor/files/root b/compass/deploy/ansible/roles/monitor/files/root new file mode 100644 index 000000000..9c55c4f16 --- /dev/null +++ b/compass/deploy/ansible/roles/monitor/files/root @@ -0,0 +1 @@ +* * * * * /usr/local/bin/check_service.sh >> /var/log/check_service.log 2>&1 diff --git a/compass/deploy/ansible/roles/monitor/tasks/main.yml b/compass/deploy/ansible/roles/monitor/tasks/main.yml new file mode 100644 index 000000000..e5b93f396 --- /dev/null +++ b/compass/deploy/ansible/roles/monitor/tasks/main.yml @@ -0,0 +1,11 @@ +--- +- name: copy service check file + copy: src=check_service.sh dest=/usr/local/bin/check_service.sh mode=0777 + +- name: copy cron file + copy: src=root dest=/var/spool/cron/crontabs/root mode=0600 + +- name: restart cron + service: name=cron state=restarted + + diff --git a/compass/deploy/ansible/roles/mq/tasks/main.yml b/compass/deploy/ansible/roles/mq/tasks/main.yml new file mode 100644 index 000000000..4ae406533 --- /dev/null +++ b/compass/deploy/ansible/roles/mq/tasks/main.yml @@ -0,0 +1,5 @@ +--- +- include: rabbitmq.yml + +#- include: rabbitmq_cluster.yml +# when: HA_CLUSTER is defined diff --git a/compass/deploy/ansible/roles/mq/tasks/rabbitmq.yml b/compass/deploy/ansible/roles/mq/tasks/rabbitmq.yml new file mode 100644 index 000000000..571440662 --- /dev/null +++ b/compass/deploy/ansible/roles/mq/tasks/rabbitmq.yml @@ -0,0 +1,45 @@ +--- +- name: create rabbitmq directory + file: path=/etc/rabbitmq state=directory mode=0755 + +- name: copy rabbitmq config file + template: src=rabbitmq-env.conf dest=/etc/rabbitmq/rabbitmq-env.conf mode=0755 + +- name: install rabbitmq-server + apt: name=rabbitmq-server state=present + +- name: stop rabbitmq-server + service: name=rabbitmq-server + state=stopped + +- name: update .erlang.cookie + template: src=.erlang.cookie dest=/var/lib/rabbitmq/.erlang.cookie + group=rabbitmq + owner=rabbitmq + mode=0400 + when: ERLANG_TOKEN is defined + +- name: start and enable rabbitmq-server + service: name=rabbitmq-server + state=started + enabled=yes + +- name: generate mq service list + shell: echo {{ item }} >> /opt/service + with_items: + - rabbitmq-server + +- name: modify rabbitmq password + command: rabbitmqctl change_password guest {{ RABBIT_PASS }} + when: "RABBIT_USER is defined and RABBIT_USER == 'guest'" + ignore_errors: True + +- name: add rabbitmq user + command: rabbitmqctl add_user {{ RABBIT_USER }} {{ RABBIT_PASS }} + when: "RABBIT_USER is defined and RABBIT_USER != 'guest'" + ignore_errors: True + +- name: set rabbitmq user permission + command: rabbitmqctl set_permissions -p / {{ RABBIT_USER }} ".*" ".*" ".*" + when: "RABBIT_USER is defined and RABBIT_USER != 'guest'" + diff --git a/compass/deploy/ansible/roles/mq/tasks/rabbitmq_cluster.yml b/compass/deploy/ansible/roles/mq/tasks/rabbitmq_cluster.yml new file mode 100644 index 000000000..afd4c779f --- /dev/null +++ b/compass/deploy/ansible/roles/mq/tasks/rabbitmq_cluster.yml @@ -0,0 +1,27 @@ +--- +- name: stop rabbitmq app + command: rabbitmqctl stop_app + when: HA_CLUSTER[inventory_hostname] != '' + +- name: rabbitmqctl reset + command: rabbitmqctl reset + when: HA_CLUSTER[inventory_hostname] != '' + +- name: stop rabbitmq + shell: rabbitmqctl stop + +- name: set detach + shell: rabbitmq-server -detached + +- name: join cluster + command: rabbitmqctl join_cluster rabbit@{{ item }} + when: item != inventory_hostname and HA_CLUSTER[item] == '' + with_items: + groups['controller'] + +- name: start rabbitmq app + command: rabbitmqctl start_app + +- name: set the HA policy + rabbitmq_policy: name=ha-all pattern='^(?!amq\.).*' tags="ha-mode=all" + diff --git a/compass/deploy/ansible/roles/mq/templates/rabbitmq-env.conf b/compass/deploy/ansible/roles/mq/templates/rabbitmq-env.conf new file mode 100644 index 000000000..6dd7349c7 --- /dev/null +++ b/compass/deploy/ansible/roles/mq/templates/rabbitmq-env.conf @@ -0,0 +1 @@ +RABBITMQ_NODE_IP_ADDRESS={{ HA_VIP }} diff --git a/compass/deploy/ansible/roles/neutron-common/handlers/main.yml b/compass/deploy/ansible/roles/neutron-common/handlers/main.yml new file mode 100644 index 000000000..36d779dd5 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-common/handlers/main.yml @@ -0,0 +1,13 @@ +--- +- name: restart neutron-plugin-openvswitch-agent + service: name=neutron-plugin-openvswitch-agent state=restarted enabled=yes + when: "'opendaylight' not in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: restart neutron-l3-agent + service: name=neutron-l3-agent state=restarted enabled=yes + +- name: restart neutron-dhcp-agent + service: name=neutron-dhcp-agent state=restarted enabled=yes + +- name: restart neutron-metadata-agent + service: name=neutron-metadata-agent state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/neutron-compute/defaults/main.yml b/compass/deploy/ansible/roles/neutron-compute/defaults/main.yml new file mode 100644 index 000000000..825178b2a --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/defaults/main.yml @@ -0,0 +1,2 @@ +--- +neutron_ovs_bridge_mappings: "" diff --git a/compass/deploy/ansible/roles/neutron-compute/handlers/main.yml b/compass/deploy/ansible/roles/neutron-compute/handlers/main.yml new file mode 100644 index 000000000..36d779dd5 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/handlers/main.yml @@ -0,0 +1,13 @@ +--- +- name: restart neutron-plugin-openvswitch-agent + service: name=neutron-plugin-openvswitch-agent state=restarted enabled=yes + when: "'opendaylight' not in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: restart neutron-l3-agent + service: name=neutron-l3-agent state=restarted enabled=yes + +- name: restart neutron-dhcp-agent + service: name=neutron-dhcp-agent state=restarted enabled=yes + +- name: restart neutron-metadata-agent + service: name=neutron-metadata-agent state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/neutron-compute/tasks/main.yml b/compass/deploy/ansible/roles/neutron-compute/tasks/main.yml new file mode 100644 index 000000000..93ee46fc2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/tasks/main.yml @@ -0,0 +1,55 @@ +--- + +- name: activate ipv4 forwarding + sysctl: name=net.ipv4.ip_forward value=1 + state=present reload=yes + +- name: deactivate ipv4 rp filter + sysctl: name=net.ipv4.conf.all.rp_filter value=0 + state=present reload=yes + +- name: deactivate ipv4 default rp filter + sysctl: name=net.ipv4.conf.default.rp_filter + value=0 state=present reload=yes + +- name: install compute-related neutron packages + apt: name={{ item }} state=present force=yes + with_items: + - neutron-common + - neutron-plugin-ml2 + - openvswitch-datapath-dkms + - openvswitch-switch + +- name: generate neutron computer service list + shell: echo {{ item }} >> /opt/service + with_items: + - neutron-plugin-openvswitch-agent + +- name: install neutron openvswitch agent + apt: name=neutron-plugin-openvswitch-agent + state=present force=yes + when: "'opendaylight' not in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: config neutron + template: src=neutron-network.conf + dest=/etc/neutron/neutron.conf backup=yes + notify: + - restart neutron-plugin-openvswitch-agent + +- name: config ml2 plugin + template: src=ml2_conf.ini + dest=/etc/neutron/plugins/ml2/ml2_conf.ini + backup=yes + notify: + - restart neutron-plugin-openvswitch-agent + +- name: add br-int + openvswitch_bridge: bridge=br-int state=present + notify: + - restart neutron-plugin-openvswitch-agent + - restart nova-compute + +- include: ../../neutron-network/tasks/odl.yml + when: "'opendaylight' in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- meta: flush_handlers diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/dhcp_agent.ini b/compass/deploy/ansible/roles/neutron-compute/templates/dhcp_agent.ini new file mode 100644 index 000000000..19eb62ec4 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/dhcp_agent.ini @@ -0,0 +1,90 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# The DHCP agent will resync its state with Neutron to recover from any +# transient notification or rpc errors. The interval is number of +# seconds between attempts. +resync_interval = 5 + +# The DHCP agent requires an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins(OVS, Ryu, NEC, NVP, +# BigSwitch/Floodlight) +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Name of Open vSwitch bridge to use +# ovs_integration_bridge = br-int + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# The agent can use other DHCP drivers. Dnsmasq is the simplest and requires +# no additional setup of the DHCP server. +dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# The DHCP server can assist with providing metadata support on isolated +# networks. Setting this value to True will cause the DHCP server to append +# specific host routes to the DHCP request. The metadata service will only +# be activated when the subnet does not contain any router port. The guest +# instance must be configured to request host routes via DHCP (Option 121). +enable_isolated_metadata = False + +# Allows for serving metadata requests coming from a dedicated metadata +# access network whose cidr is 169.254.169.254/16 (or larger prefix), and +# is connected to a Neutron router from which the VMs send metadata +# request. In this case DHCP Option 121 will not be injected in VMs, as +# they will be able to reach 169.254.169.254 through a router. +# This option requires enable_isolated_metadata = True +enable_metadata_network = False + +# Number of threads to use during sync process. Should not exceed connection +# pool size configured on server. +# num_sync_threads = 4 + +# Location to store DHCP server config files +# dhcp_confs = $state_path/dhcp + +# Domain to use for building the hostnames +dhcp_domain = openstacklocal + +# Override the default dnsmasq settings with this file +# dnsmasq_config_file = +dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf + +# Comma-separated list of DNS servers which will be used by dnsmasq +# as forwarders. +# dnsmasq_dns_servers = + +# Limit number of leases to prevent a denial-of-service. +dnsmasq_lease_max = 16777216 + +# Location to DHCP lease relay UNIX domain socket +# dhcp_lease_relay_socket = $state_path/dhcp/lease_relay + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# dhcp_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the dhcp agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a dhcp server is disabled. +# dhcp_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/dnsmasq-neutron.conf b/compass/deploy/ansible/roles/neutron-compute/templates/dnsmasq-neutron.conf new file mode 100644 index 000000000..7bcbd9df2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/dnsmasq-neutron.conf @@ -0,0 +1,2 @@ +dhcp-option-force=26,1454 + diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/etc/xorp/config.boot b/compass/deploy/ansible/roles/neutron-compute/templates/etc/xorp/config.boot new file mode 100644 index 000000000..32caf96dd --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/etc/xorp/config.boot @@ -0,0 +1,25 @@ +interfaces { + restore-original-config-on-shutdown: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + description: "Internal pNodes interface" + disable: false + default-system-config + } +} + +protocols { + igmp { + disable: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + vif {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + disable: false + version: 3 + } + } + traceoptions { + flag all { + disable: false + } + } + } +} diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/l3_agent.ini b/compass/deploy/ansible/roles/neutron-compute/templates/l3_agent.ini new file mode 100644 index 000000000..b394c0082 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/l3_agent.ini @@ -0,0 +1,81 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# L3 requires that an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins (OVS, Ryu, NEC) +# that supports L3 agent +# interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +# ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# If use_namespaces is set as False then the agent can only configure one router. + +# This is done by setting the specific router_id. +# router_id = + +# When external_network_bridge is set, each L3 agent can be associated +# with no more than one external network. This value should be set to the UUID +# of that external network. To allow L3 agent support multiple external +# networks, both the external_network_bridge and gateway_external_network_id +# must be left empty. +# gateway_external_network_id = + +# Indicates that this L3 agent should also handle routers that do not have +# an external network gateway configured. This option should be True only +# for a single agent in a Neutron deployment, and may be False for all agents +# if all routers must have an external network gateway +handle_internal_only_routers = True + +# Name of bridge used for external network traffic. This should be set to +# empty value for the linux bridge. when this parameter is set, each L3 agent +# can be associated with no more than one external network. +external_network_bridge = br-ex + +# TCP Port used by Neutron metadata server +metadata_port = 9697 + +# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0 +# to disable this feature. +send_arp_for_ha = 3 + +# seconds between re-sync routers' data if needed +periodic_interval = 40 + +# seconds to start to sync routers' data after +# starting agent +periodic_fuzzy_delay = 5 + +# enable_metadata_proxy, which is true by default, can be set to False +# if the Nova metadata server is not available +# enable_metadata_proxy = True + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# router_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the L3 agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a router is destroyed. +# router_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/metadata_agent.ini b/compass/deploy/ansible/roles/neutron-compute/templates/metadata_agent.ini new file mode 100644 index 000000000..6badf2877 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/metadata_agent.ini @@ -0,0 +1,46 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +debug = True + +# The Neutron user information for accessing the Neutron API. +auth_url = http://{{ HA_VIP }}:5000/v2.0 +auth_region = RegionOne +# Turn off verification of the certificate for ssl +# auth_insecure = False +# Certificate Authority public key (CA cert) file for ssl +# auth_ca_cert = +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} + +# Network service endpoint type to pull from the keystone catalog +# endpoint_type = adminURL + +# IP address used by Nova metadata server +nova_metadata_ip = {{ HA_VIP }} + +# TCP Port used by Nova metadata server +nova_metadata_port = 8775 + +# When proxying metadata requests, Neutron signs the Instance-ID header with a +# shared secret to prevent spoofing. You may select any string for a secret, +# but it must match here and in the configuration used by the Nova Metadata +# Server. NOTE: Nova uses a different key: neutron_metadata_proxy_shared_secret +metadata_proxy_shared_secret = {{ METADATA_SECRET }} + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# Number of separate worker processes for metadata server +# metadata_workers = 0 + +# Number of backlog requests to configure the metadata server socket with +# metadata_backlog = 128 + +# URL to connect to the cache backend. +# Example of URL using memory caching backend +# with ttl set to 5 seconds: cache_url = memory://?default_ttl=5 +# default_ttl=0 parameter will cause cache entries to never expire. +# Otherwise default_ttl specifies time in seconds a cache entry is valid for. +# No cache is used in case no value is passed. +# cache_url = diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/ml2_conf.ini b/compass/deploy/ansible/roles/neutron-compute/templates/ml2_conf.ini new file mode 100644 index 000000000..a7900693e --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/ml2_conf.ini @@ -0,0 +1,108 @@ +[ml2] +# (ListOpt) List of network type driver entrypoints to be loaded from +# the neutron.ml2.type_drivers namespace. +# +# type_drivers = local,flat,vlan,gre,vxlan +# Example: type_drivers = flat,vlan,gre,vxlan +type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }} + +# (ListOpt) Ordered list of network_types to allocate as tenant +# networks. The default value 'local' is useful for single-box testing +# but provides no connectivity between hosts. +# +# tenant_network_types = local +# Example: tenant_network_types = vlan,gre,vxlan +tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} + +# (ListOpt) Ordered list of networking mechanism driver entrypoints +# to be loaded from the neutron.ml2.mechanism_drivers namespace. +# mechanism_drivers = +# Example: mechanism_drivers = openvswitch,mlnx +# Example: mechanism_drivers = arista +# Example: mechanism_drivers = cisco,logger +# Example: mechanism_drivers = openvswitch,brocade +# Example: mechanism_drivers = linuxbridge,brocade +mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }} + +[ml2_type_flat] +# (ListOpt) List of physical_network names with which flat networks +# can be created. Use * to allow flat networks with arbitrary +# physical_network names. +# +flat_networks = external +# Example:flat_networks = physnet1,physnet2 +# Example:flat_networks = * + +[ml2_type_vlan] +# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples +# specifying physical_network names usable for VLAN provider and +# tenant networks, as well as ranges of VLAN tags on each +# physical_network available for allocation as tenant networks. +# +network_vlan_ranges = +# Example: network_vlan_ranges = physnet1:1000:2999,physnet2 + +[ml2_type_gre] +# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation +tunnel_id_ranges = 1:1000 + +[ml2_type_vxlan] +# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating +# ranges of VXLAN VNI IDs that are available for tenant network allocation. +# +vni_ranges = 1001:4095 + +# (StrOpt) Multicast group for the VXLAN interface. When configured, will +# enable sending all broadcast traffic to this multicast group. When left +# unconfigured, will disable multicast VXLAN mode. +# +vxlan_group = 239.1.1.1 +# Example: vxlan_group = 239.1.1.1 + +[securitygroup] +# Controls if neutron security group is enabled or not. +# It should be false when you use nova security group. +# enable_security_group = True +firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver +enable_security_group = True + +[database] +connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8 + +[ovs] +local_ip = {{ internal_ip }} +{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %} +integration_bridge = br-int +tunnel_bridge = br-tun +tunnel_id_ranges = 1001:4095 +tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +bridge_mappings = {{ neutron_ovs_bridge_mappings | default("external:br-ex") }} +{% endif %} + +[agent] +root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf +tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %} +vxlan_udp_port = 4789 +{% endif %} +l2_population = False + +[odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +network_vlan_ranges = 1001:4095 +tunnel_id_ranges = 1001:4095 +tun_peer_patch_port = patch-int +int_peer_patch_port = patch-tun +tenant_network_type = vxlan +tunnel_bridge = br-tun +integration_bridge = br-int +controllers = 10.1.0.15:8080:admin:admin +{% endif %} + +[ml2_odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +username = {{ odl_username }} +password = {{ odl_password }} +url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron +{% endif %} + diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/neutron-network.conf b/compass/deploy/ansible/roles/neutron-compute/templates/neutron-network.conf new file mode 100644 index 000000000..93be9cbc0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/neutron-network.conf @@ -0,0 +1,465 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ DEBUG }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/neutron.conf b/compass/deploy/ansible/roles/neutron-compute/templates/neutron.conf new file mode 100644 index 000000000..15753675e --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/neutron.conf @@ -0,0 +1,466 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ VERBOSE }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant +nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }} + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/neutron_init.sh b/compass/deploy/ansible/roles/neutron-compute/templates/neutron_init.sh new file mode 100644 index 000000000..b92e202f2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/neutron_init.sh @@ -0,0 +1,4 @@ +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 net-create ext-net --shared --router:external=True + +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 subnet-create ext-net --name ext-subnet --allocation-pool start={{ FLOATING_IP_START }},end={{ FLOATING_IP_END}} --disable-dhcp --gateway {{EXTERNAL_NETWORK_GATEWAY}} {{EXTERNAL_NETWORK_CIDR}} + diff --git a/compass/deploy/ansible/roles/neutron-compute/templates/nova.conf b/compass/deploy/ansible/roles/neutron-compute/templates/nova.conf new file mode 100644 index 000000000..4988cb036 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-compute/templates/nova.conf @@ -0,0 +1,73 @@ +[DEFAULT] +dhcpbridge_flagfile=/etc/nova/nova.conf +dhcpbridge=/usr/bin/nova-dhcpbridge +logdir=/var/log/nova +state_path=/var/lib/nova +lock_path=/var/lock/nova +force_dhcp_release=True +iscsi_helper=tgtadm +libvirt_use_virtio_for_bridges=True +connection_type=libvirt +root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf +verbose={{ VERBOSE}} +debug={{ DEBUG }} +ec2_private_dns_show_ip=True +api_paste_config=/etc/nova/api-paste.ini +volumes_path=/var/lib/nova/volumes +enabled_apis=ec2,osapi_compute,metadata + +vif_plugging_is_fatal: false +vif_plugging_timeout: 0 + +auth_strategy = keystone + +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} + +my_ip = {{ internal_ip }} +vnc_enabled = True +vncserver_listen = {{ internal_ip }} +vncserver_proxyclient_address = {{ internal_ip }} +novncproxy_base_url = http://{{ HA_VIP }}:6080/vnc_auto.html + +novncproxy_host = {{ internal_ip }} +novncproxy_port = 6080 + +network_api_class = nova.network.neutronv2.api.API +linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver +firewall_driver = nova.virt.firewall.NoopFirewallDriver +security_group_api = neutron + +instance_usage_audit = True +instance_usage_audit_period = hour +notify_on_state_change = vm_and_task_state +notification_driver = nova.openstack.common.notifier.rpc_notifier +notification_driver = ceilometer.compute.nova_notifier + +[database] +# The SQLAlchemy connection string used to connect to the database +connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova + +[conductor] +manager = nova.conductor.manager.ConductorManager +topic = conductor + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = nova +admin_password = {{ NOVA_PASS }} + +[glance] +host = {{ HA_VIP }} + +[neutron] +url = http://{{ HA_VIP }}:9696 +auth_strategy = keystone +admin_tenant_name = service +admin_username = neutron +admin_password = {{ NEUTRON_PASS }} +admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 diff --git a/compass/deploy/ansible/roles/neutron-controller/handlers/main.yml b/compass/deploy/ansible/roles/neutron-controller/handlers/main.yml new file mode 100644 index 000000000..b4c1585d3 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/handlers/main.yml @@ -0,0 +1,24 @@ +--- +- name: restart nova-api + service: name=nova-api state=restarted enabled=yes + +- name: restart nova-cert + service: name=nova-cert state=restarted enabled=yes + +- name: restart nova-consoleauth + service: name=nova-consoleauth state=restarted enabled=yes + +- name: restart nova-scheduler + service: name=nova-scheduler state=restarted enabled=yes + +- name: restart nova-conductor + service: name=nova-conductor state=restarted enabled=yes + +- name: restart nova-novncproxy + service: name=nova-novncproxy state=restarted enabled=yes + +- name: remove nova-sqlite-db + shell: rm /var/lib/nova/nova.sqlite || touch nova.sqlite.db.removed + +- name: restart neutron-server + service: name=neutron-server state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/neutron-controller/tasks/main.yml b/compass/deploy/ansible/roles/neutron-controller/tasks/main.yml new file mode 100644 index 000000000..9c04d74e0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/tasks/main.yml @@ -0,0 +1,13 @@ +--- +- include: neutron_install.yml + tags: + - install + - neutron_install + - neutron + +- include: neutron_config.yml + when: HA_CLUSTER is not defined or HA_CLUSTER[inventory_hostname] == '' + tags: + - config + - neutron_config + - neutron diff --git a/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_config.yml b/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_config.yml new file mode 100644 index 000000000..77cc29ae4 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_config.yml @@ -0,0 +1,10 @@ +--- +- name: neutron-db-manage upgrade to Juno + shell: neutron-db-manage --config-file=/etc/neutron/neutron.conf --config-file=/etc/neutron/plugins/ml2/ml2_conf.ini upgrade head + register: result + until: result.rc == 0 + retries: 5 + delay: 3 + notify: + - restart neutron-server + diff --git a/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_install.yml b/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_install.yml new file mode 100644 index 000000000..616529939 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/tasks/neutron_install.yml @@ -0,0 +1,29 @@ +--- +- name: install controller-related neutron packages + apt: name={{ item }} state=present force=yes + with_items: + - neutron-server + - neutron-plugin-ml2 + +- name: generate neutron controll service list + shell: echo {{ item }} >> /opt/service + with_items: + - neutron-server + - neutron-plugin-ml2 + +- name: get tenant id to fill neutron.conf + shell: keystone --os-token={{ ADMIN_TOKEN }} --os-endpoint=http://{{ HA_VIP }}:35357/v2.0 tenant-get service | grep id | awk '{print $4}' + register: NOVA_ADMIN_TENANT_ID + +- name: update neutron conf + template: src=neutron.conf dest=/etc/neutron/neutron.conf backup=yes + notify: + - restart neutron-server + +- name: update ml2 plugin conf + template: src=ml2_conf.ini dest=/etc/neutron/plugins/ml2/ml2_conf.ini backup=yes + notify: + - restart neutron-server + +- meta: flush_handlers + diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/dhcp_agent.ini b/compass/deploy/ansible/roles/neutron-controller/templates/dhcp_agent.ini new file mode 100644 index 000000000..19eb62ec4 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/dhcp_agent.ini @@ -0,0 +1,90 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# The DHCP agent will resync its state with Neutron to recover from any +# transient notification or rpc errors. The interval is number of +# seconds between attempts. +resync_interval = 5 + +# The DHCP agent requires an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins(OVS, Ryu, NEC, NVP, +# BigSwitch/Floodlight) +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Name of Open vSwitch bridge to use +# ovs_integration_bridge = br-int + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# The agent can use other DHCP drivers. Dnsmasq is the simplest and requires +# no additional setup of the DHCP server. +dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# The DHCP server can assist with providing metadata support on isolated +# networks. Setting this value to True will cause the DHCP server to append +# specific host routes to the DHCP request. The metadata service will only +# be activated when the subnet does not contain any router port. The guest +# instance must be configured to request host routes via DHCP (Option 121). +enable_isolated_metadata = False + +# Allows for serving metadata requests coming from a dedicated metadata +# access network whose cidr is 169.254.169.254/16 (or larger prefix), and +# is connected to a Neutron router from which the VMs send metadata +# request. In this case DHCP Option 121 will not be injected in VMs, as +# they will be able to reach 169.254.169.254 through a router. +# This option requires enable_isolated_metadata = True +enable_metadata_network = False + +# Number of threads to use during sync process. Should not exceed connection +# pool size configured on server. +# num_sync_threads = 4 + +# Location to store DHCP server config files +# dhcp_confs = $state_path/dhcp + +# Domain to use for building the hostnames +dhcp_domain = openstacklocal + +# Override the default dnsmasq settings with this file +# dnsmasq_config_file = +dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf + +# Comma-separated list of DNS servers which will be used by dnsmasq +# as forwarders. +# dnsmasq_dns_servers = + +# Limit number of leases to prevent a denial-of-service. +dnsmasq_lease_max = 16777216 + +# Location to DHCP lease relay UNIX domain socket +# dhcp_lease_relay_socket = $state_path/dhcp/lease_relay + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# dhcp_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the dhcp agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a dhcp server is disabled. +# dhcp_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/dnsmasq-neutron.conf b/compass/deploy/ansible/roles/neutron-controller/templates/dnsmasq-neutron.conf new file mode 100644 index 000000000..7bcbd9df2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/dnsmasq-neutron.conf @@ -0,0 +1,2 @@ +dhcp-option-force=26,1454 + diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/etc/xorp/config.boot b/compass/deploy/ansible/roles/neutron-controller/templates/etc/xorp/config.boot new file mode 100644 index 000000000..32caf96dd --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/etc/xorp/config.boot @@ -0,0 +1,25 @@ +interfaces { + restore-original-config-on-shutdown: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + description: "Internal pNodes interface" + disable: false + default-system-config + } +} + +protocols { + igmp { + disable: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + vif {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + disable: false + version: 3 + } + } + traceoptions { + flag all { + disable: false + } + } + } +} diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/l3_agent.ini b/compass/deploy/ansible/roles/neutron-controller/templates/l3_agent.ini new file mode 100644 index 000000000..b394c0082 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/l3_agent.ini @@ -0,0 +1,81 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# L3 requires that an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins (OVS, Ryu, NEC) +# that supports L3 agent +# interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +# ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# If use_namespaces is set as False then the agent can only configure one router. + +# This is done by setting the specific router_id. +# router_id = + +# When external_network_bridge is set, each L3 agent can be associated +# with no more than one external network. This value should be set to the UUID +# of that external network. To allow L3 agent support multiple external +# networks, both the external_network_bridge and gateway_external_network_id +# must be left empty. +# gateway_external_network_id = + +# Indicates that this L3 agent should also handle routers that do not have +# an external network gateway configured. This option should be True only +# for a single agent in a Neutron deployment, and may be False for all agents +# if all routers must have an external network gateway +handle_internal_only_routers = True + +# Name of bridge used for external network traffic. This should be set to +# empty value for the linux bridge. when this parameter is set, each L3 agent +# can be associated with no more than one external network. +external_network_bridge = br-ex + +# TCP Port used by Neutron metadata server +metadata_port = 9697 + +# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0 +# to disable this feature. +send_arp_for_ha = 3 + +# seconds between re-sync routers' data if needed +periodic_interval = 40 + +# seconds to start to sync routers' data after +# starting agent +periodic_fuzzy_delay = 5 + +# enable_metadata_proxy, which is true by default, can be set to False +# if the Nova metadata server is not available +# enable_metadata_proxy = True + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# router_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the L3 agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a router is destroyed. +# router_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/metadata_agent.ini b/compass/deploy/ansible/roles/neutron-controller/templates/metadata_agent.ini new file mode 100644 index 000000000..6badf2877 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/metadata_agent.ini @@ -0,0 +1,46 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +debug = True + +# The Neutron user information for accessing the Neutron API. +auth_url = http://{{ HA_VIP }}:5000/v2.0 +auth_region = RegionOne +# Turn off verification of the certificate for ssl +# auth_insecure = False +# Certificate Authority public key (CA cert) file for ssl +# auth_ca_cert = +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} + +# Network service endpoint type to pull from the keystone catalog +# endpoint_type = adminURL + +# IP address used by Nova metadata server +nova_metadata_ip = {{ HA_VIP }} + +# TCP Port used by Nova metadata server +nova_metadata_port = 8775 + +# When proxying metadata requests, Neutron signs the Instance-ID header with a +# shared secret to prevent spoofing. You may select any string for a secret, +# but it must match here and in the configuration used by the Nova Metadata +# Server. NOTE: Nova uses a different key: neutron_metadata_proxy_shared_secret +metadata_proxy_shared_secret = {{ METADATA_SECRET }} + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# Number of separate worker processes for metadata server +# metadata_workers = 0 + +# Number of backlog requests to configure the metadata server socket with +# metadata_backlog = 128 + +# URL to connect to the cache backend. +# Example of URL using memory caching backend +# with ttl set to 5 seconds: cache_url = memory://?default_ttl=5 +# default_ttl=0 parameter will cause cache entries to never expire. +# Otherwise default_ttl specifies time in seconds a cache entry is valid for. +# No cache is used in case no value is passed. +# cache_url = diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/ml2_conf.ini b/compass/deploy/ansible/roles/neutron-controller/templates/ml2_conf.ini new file mode 100644 index 000000000..a7900693e --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/ml2_conf.ini @@ -0,0 +1,108 @@ +[ml2] +# (ListOpt) List of network type driver entrypoints to be loaded from +# the neutron.ml2.type_drivers namespace. +# +# type_drivers = local,flat,vlan,gre,vxlan +# Example: type_drivers = flat,vlan,gre,vxlan +type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }} + +# (ListOpt) Ordered list of network_types to allocate as tenant +# networks. The default value 'local' is useful for single-box testing +# but provides no connectivity between hosts. +# +# tenant_network_types = local +# Example: tenant_network_types = vlan,gre,vxlan +tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} + +# (ListOpt) Ordered list of networking mechanism driver entrypoints +# to be loaded from the neutron.ml2.mechanism_drivers namespace. +# mechanism_drivers = +# Example: mechanism_drivers = openvswitch,mlnx +# Example: mechanism_drivers = arista +# Example: mechanism_drivers = cisco,logger +# Example: mechanism_drivers = openvswitch,brocade +# Example: mechanism_drivers = linuxbridge,brocade +mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }} + +[ml2_type_flat] +# (ListOpt) List of physical_network names with which flat networks +# can be created. Use * to allow flat networks with arbitrary +# physical_network names. +# +flat_networks = external +# Example:flat_networks = physnet1,physnet2 +# Example:flat_networks = * + +[ml2_type_vlan] +# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples +# specifying physical_network names usable for VLAN provider and +# tenant networks, as well as ranges of VLAN tags on each +# physical_network available for allocation as tenant networks. +# +network_vlan_ranges = +# Example: network_vlan_ranges = physnet1:1000:2999,physnet2 + +[ml2_type_gre] +# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation +tunnel_id_ranges = 1:1000 + +[ml2_type_vxlan] +# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating +# ranges of VXLAN VNI IDs that are available for tenant network allocation. +# +vni_ranges = 1001:4095 + +# (StrOpt) Multicast group for the VXLAN interface. When configured, will +# enable sending all broadcast traffic to this multicast group. When left +# unconfigured, will disable multicast VXLAN mode. +# +vxlan_group = 239.1.1.1 +# Example: vxlan_group = 239.1.1.1 + +[securitygroup] +# Controls if neutron security group is enabled or not. +# It should be false when you use nova security group. +# enable_security_group = True +firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver +enable_security_group = True + +[database] +connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8 + +[ovs] +local_ip = {{ internal_ip }} +{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %} +integration_bridge = br-int +tunnel_bridge = br-tun +tunnel_id_ranges = 1001:4095 +tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +bridge_mappings = {{ neutron_ovs_bridge_mappings | default("external:br-ex") }} +{% endif %} + +[agent] +root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf +tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %} +vxlan_udp_port = 4789 +{% endif %} +l2_population = False + +[odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +network_vlan_ranges = 1001:4095 +tunnel_id_ranges = 1001:4095 +tun_peer_patch_port = patch-int +int_peer_patch_port = patch-tun +tenant_network_type = vxlan +tunnel_bridge = br-tun +integration_bridge = br-int +controllers = 10.1.0.15:8080:admin:admin +{% endif %} + +[ml2_odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +username = {{ odl_username }} +password = {{ odl_password }} +url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron +{% endif %} + diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/neutron-network.conf b/compass/deploy/ansible/roles/neutron-controller/templates/neutron-network.conf new file mode 100644 index 000000000..93be9cbc0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/neutron-network.conf @@ -0,0 +1,465 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ DEBUG }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/neutron.conf b/compass/deploy/ansible/roles/neutron-controller/templates/neutron.conf new file mode 100644 index 000000000..2a66e94a2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/neutron.conf @@ -0,0 +1,466 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ VERBOSE }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant +nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }} + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/neutron_init.sh b/compass/deploy/ansible/roles/neutron-controller/templates/neutron_init.sh new file mode 100644 index 000000000..b92e202f2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/neutron_init.sh @@ -0,0 +1,4 @@ +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 net-create ext-net --shared --router:external=True + +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 subnet-create ext-net --name ext-subnet --allocation-pool start={{ FLOATING_IP_START }},end={{ FLOATING_IP_END}} --disable-dhcp --gateway {{EXTERNAL_NETWORK_GATEWAY}} {{EXTERNAL_NETWORK_CIDR}} + diff --git a/compass/deploy/ansible/roles/neutron-controller/templates/nova.conf b/compass/deploy/ansible/roles/neutron-controller/templates/nova.conf new file mode 100644 index 000000000..95870732b --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-controller/templates/nova.conf @@ -0,0 +1,69 @@ +[DEFAULT] +dhcpbridge_flagfile=/etc/nova/nova.conf +dhcpbridge=/usr/bin/nova-dhcpbridge +logdir=/var/log/nova +state_path=/var/lib/nova +lock_path=/var/lock/nova +force_dhcp_release=True +iscsi_helper=tgtadm +libvirt_use_virtio_for_bridges=True +connection_type=libvirt +root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf +verbose={{ VERBOSE}} +debug={{ DEBUG }} +ec2_private_dns_show_ip=True +api_paste_config=/etc/nova/api-paste.ini +volumes_path=/var/lib/nova/volumes +enabled_apis=ec2,osapi_compute,metadata + +vif_plugging_is_fatal: false +vif_plugging_timeout: 0 + +auth_strategy = keystone + +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} + +my_ip = {{ internal_ip }} +vnc_enabled = True +vncserver_listen = {{ internal_ip }} +vncserver_proxyclient_address = {{ internal_ip }} +novncproxy_base_url = http://{{ HA_VIP }}:6080/vnc_auto.html + +novncproxy_host = {{ internal_ip }} +novncproxy_port = 6080 + +network_api_class = nova.network.neutronv2.api.API +linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver +firewall_driver = nova.virt.firewall.NoopFirewallDriver +security_group_api = neutron + +instance_usage_audit = True +instance_usage_audit_period = hour +notify_on_state_change = vm_and_task_state +notification_driver = nova.openstack.common.notifier.rpc_notifier +notification_driver = ceilometer.compute.nova_notifier + +[database] +# The SQLAlchemy connection string used to connect to the database +connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = nova +admin_password = {{ NOVA_PASS }} + +[glance] +host = {{ HA_VIP }} + +[neutron] +url = http://{{ HA_VIP }}:9696 +auth_strategy = keystone +admin_tenant_name = service +admin_username = neutron +admin_password = {{ NEUTRON_PASS }} +admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 diff --git a/compass/deploy/ansible/roles/neutron-network/handlers/main.yml b/compass/deploy/ansible/roles/neutron-network/handlers/main.yml new file mode 100644 index 000000000..d6c5cc8f1 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/handlers/main.yml @@ -0,0 +1,21 @@ +--- +- name: restart neutron-plugin-openvswitch-agent + service: name=neutron-plugin-openvswitch-agent state=restarted enabled=yes + when: "'opendaylight' not in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: restart neutron-l3-agent + service: name=neutron-l3-agent state=restarted enabled=yes + +- name: kill dnsmasq + command: killall dnsmasq + ignore_errors: True + +- name: restart neutron-dhcp-agent + service: name=neutron-dhcp-agent state=restarted enabled=yes + +- name: restart neutron-metadata-agent + service: name=neutron-metadata-agent state=restarted enabled=yes + +- name: restart xorp + service: name=xorp state=restarted enabled=yes sleep=10 + ignore_errors: True diff --git a/compass/deploy/ansible/roles/neutron-network/tasks/igmp-router.yml b/compass/deploy/ansible/roles/neutron-network/tasks/igmp-router.yml new file mode 100644 index 000000000..d6f38a0e0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/tasks/igmp-router.yml @@ -0,0 +1,20 @@ +--- +- name: Install XORP to provide IGMP router functionality + apt: pkg=xorp + +- name: configure xorp + template: src=etc/xorp/config.boot dest=/etc/xorp/config.boot + notify: + - restart xorp + +- name: set xorp defaults + lineinfile: dest=/etc/default/xorp regexp=^RUN= line=RUN=yes + notify: + - restart xorp + +- meta: flush_handlers + +- name: start and enable xorp service + service: name=xorp state=started enabled=yes + retries: 2 + delay: 10 diff --git a/compass/deploy/ansible/roles/neutron-network/tasks/main.yml b/compass/deploy/ansible/roles/neutron-network/tasks/main.yml new file mode 100644 index 000000000..1d4b591c0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/tasks/main.yml @@ -0,0 +1,114 @@ +--- +- name: activate ipv4 forwarding + sysctl: name=net.ipv4.ip_forward value=1 + state=present reload=yes + +- name: deactivate ipv4 rp filter + sysctl: name=net.ipv4.conf.all.rp_filter value=0 + state=present reload=yes + +- name: deactivate ipv4 default rp filter + sysctl: name=net.ipv4.conf.default.rp_filter + value=0 state=present reload=yes + +- name: install neutron network related packages + apt: name={{ item }} state=present force=yes + with_items: + - neutron-plugin-ml2 + - openvswitch-datapath-dkms + - openvswitch-switch + - neutron-l3-agent + - neutron-dhcp-agent + +- name: generate neutron service list + shell: echo {{ item }} >> /opt/service + with_items: + - openvswitch-switch + - neutron-l3-agent + - neutron-dhcp-agent + - neutron-plugin-openvswitch-agent + - neutron-metadata-agent + - xorp + +- name: install neutron openvswitch agent + apt: name=neutron-plugin-openvswitch-agent + state=present force=yes + when: "'openvswitch' in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: config neutron + template: src=neutron-network.conf + dest=/etc/neutron/neutron.conf backup=yes + notify: + - restart neutron-plugin-openvswitch-agent + - restart neutron-l3-agent + - kill dnsmasq + - restart neutron-dhcp-agent + - restart neutron-metadata-agent + +- name: config l3 agent + template: src=l3_agent.ini dest=/etc/neutron/l3_agent.ini + backup=yes + notify: + - restart neutron-l3-agent + +- name: config dhcp agent + template: src=dhcp_agent.ini dest=/etc/neutron/dhcp_agent.ini + backup=yes + notify: + - kill dnsmasq + - restart neutron-dhcp-agent + +- name: update dnsmasq-neutron.conf + template: src=dnsmasq-neutron.conf + dest=/etc/neutron/dnsmasq-neutron.conf + notify: + - kill dnsmasq + - restart neutron-dhcp-agent + +- name: config metadata agent + template: src=metadata_agent.ini + dest=/etc/neutron/metadata_agent.ini backup=yes + notify: + - restart neutron-metadata-agent + +- name: config ml2 plugin + template: src=ml2_conf.ini + dest=/etc/neutron/plugins/ml2/ml2_conf.ini + backup=yes + notify: + - restart neutron-plugin-openvswitch-agent + +- meta: flush_handlers + +- name: add br-int + openvswitch_bridge: bridge=br-int state=present + +- name: add br-ex + openvswitch_bridge: bridge=br-ex state=present + when: "'openvswitch' in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: assign a port to br-ex for physical ext interface + openvswitch_port: bridge=br-ex port={{ INTERFACE_NAME }} + state=present + when: "'openvswitch' in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- include: igmp-router.yml + when: "'vxlan' in {{ NEUTRON_TUNNEL_TYPES }}" + +- name: assert kernel support for vxlan + command: modinfo -F version vxlan + when: "'vxlan' in {{ NEUTRON_TUNNEL_TYPES }}" + +- name: assert iproute2 suppport for vxlan + command: ip link add type vxlan help + register: iproute_out + failed_when: iproute_out.rc == 255 + when: "'vxlan' in {{ NEUTRON_TUNNEL_TYPES }}" + +- include: odl.yml + when: "'opendaylight' in {{ NEUTRON_MECHANISM_DRIVERS }}" + +- name: restart ovs service + service: name=openvswitch-switch state=restarted enabled=yes + +- meta: flush_handlers diff --git a/compass/deploy/ansible/roles/neutron-network/tasks/odl.yml b/compass/deploy/ansible/roles/neutron-network/tasks/odl.yml new file mode 100644 index 000000000..a2b449ce5 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/tasks/odl.yml @@ -0,0 +1,13 @@ +--- +- name: ovs set manager + command: ovs-vsctl set-manager tcp:{{ controller }}:6640 + +- name: get ovs uuid + shell: ovs-vsctl get Open_vSwitch . _uuid + register: ovs_uuid + +- name: set bridge_mappings + command: ovs-vsctl set Open_vSwitch {{ ovs_uuid.stdout }} other_config:bridge_mappings=physnet1:{{ INTERFACE_NAME }} + +- name: set local ip + command: ovs-vsctl set Open_vSwitch {{ ovs_uuid.stdout }} other_config:local_ip={{ internal_ip }} diff --git a/compass/deploy/ansible/roles/neutron-network/templates/dhcp_agent.ini b/compass/deploy/ansible/roles/neutron-network/templates/dhcp_agent.ini new file mode 100644 index 000000000..19eb62ec4 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/dhcp_agent.ini @@ -0,0 +1,90 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# The DHCP agent will resync its state with Neutron to recover from any +# transient notification or rpc errors. The interval is number of +# seconds between attempts. +resync_interval = 5 + +# The DHCP agent requires an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins(OVS, Ryu, NEC, NVP, +# BigSwitch/Floodlight) +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Name of Open vSwitch bridge to use +# ovs_integration_bridge = br-int + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# The agent can use other DHCP drivers. Dnsmasq is the simplest and requires +# no additional setup of the DHCP server. +dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# The DHCP server can assist with providing metadata support on isolated +# networks. Setting this value to True will cause the DHCP server to append +# specific host routes to the DHCP request. The metadata service will only +# be activated when the subnet does not contain any router port. The guest +# instance must be configured to request host routes via DHCP (Option 121). +enable_isolated_metadata = False + +# Allows for serving metadata requests coming from a dedicated metadata +# access network whose cidr is 169.254.169.254/16 (or larger prefix), and +# is connected to a Neutron router from which the VMs send metadata +# request. In this case DHCP Option 121 will not be injected in VMs, as +# they will be able to reach 169.254.169.254 through a router. +# This option requires enable_isolated_metadata = True +enable_metadata_network = False + +# Number of threads to use during sync process. Should not exceed connection +# pool size configured on server. +# num_sync_threads = 4 + +# Location to store DHCP server config files +# dhcp_confs = $state_path/dhcp + +# Domain to use for building the hostnames +dhcp_domain = openstacklocal + +# Override the default dnsmasq settings with this file +# dnsmasq_config_file = +dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf + +# Comma-separated list of DNS servers which will be used by dnsmasq +# as forwarders. +# dnsmasq_dns_servers = + +# Limit number of leases to prevent a denial-of-service. +dnsmasq_lease_max = 16777216 + +# Location to DHCP lease relay UNIX domain socket +# dhcp_lease_relay_socket = $state_path/dhcp/lease_relay + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# dhcp_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the dhcp agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a dhcp server is disabled. +# dhcp_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-network/templates/dnsmasq-neutron.conf b/compass/deploy/ansible/roles/neutron-network/templates/dnsmasq-neutron.conf new file mode 100644 index 000000000..7bcbd9df2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/dnsmasq-neutron.conf @@ -0,0 +1,2 @@ +dhcp-option-force=26,1454 + diff --git a/compass/deploy/ansible/roles/neutron-network/templates/etc/xorp/config.boot b/compass/deploy/ansible/roles/neutron-network/templates/etc/xorp/config.boot new file mode 100644 index 000000000..32caf96dd --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/etc/xorp/config.boot @@ -0,0 +1,25 @@ +interfaces { + restore-original-config-on-shutdown: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + description: "Internal pNodes interface" + disable: false + default-system-config + } +} + +protocols { + igmp { + disable: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + vif {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + disable: false + version: 3 + } + } + traceoptions { + flag all { + disable: false + } + } + } +} diff --git a/compass/deploy/ansible/roles/neutron-network/templates/l3_agent.ini b/compass/deploy/ansible/roles/neutron-network/templates/l3_agent.ini new file mode 100644 index 000000000..b394c0082 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/l3_agent.ini @@ -0,0 +1,81 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# L3 requires that an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins (OVS, Ryu, NEC) +# that supports L3 agent +# interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +# ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# If use_namespaces is set as False then the agent can only configure one router. + +# This is done by setting the specific router_id. +# router_id = + +# When external_network_bridge is set, each L3 agent can be associated +# with no more than one external network. This value should be set to the UUID +# of that external network. To allow L3 agent support multiple external +# networks, both the external_network_bridge and gateway_external_network_id +# must be left empty. +# gateway_external_network_id = + +# Indicates that this L3 agent should also handle routers that do not have +# an external network gateway configured. This option should be True only +# for a single agent in a Neutron deployment, and may be False for all agents +# if all routers must have an external network gateway +handle_internal_only_routers = True + +# Name of bridge used for external network traffic. This should be set to +# empty value for the linux bridge. when this parameter is set, each L3 agent +# can be associated with no more than one external network. +external_network_bridge = br-ex + +# TCP Port used by Neutron metadata server +metadata_port = 9697 + +# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0 +# to disable this feature. +send_arp_for_ha = 3 + +# seconds between re-sync routers' data if needed +periodic_interval = 40 + +# seconds to start to sync routers' data after +# starting agent +periodic_fuzzy_delay = 5 + +# enable_metadata_proxy, which is true by default, can be set to False +# if the Nova metadata server is not available +# enable_metadata_proxy = True + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# router_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the L3 agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a router is destroyed. +# router_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/neutron-network/templates/metadata_agent.ini b/compass/deploy/ansible/roles/neutron-network/templates/metadata_agent.ini new file mode 100644 index 000000000..6badf2877 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/metadata_agent.ini @@ -0,0 +1,46 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +debug = True + +# The Neutron user information for accessing the Neutron API. +auth_url = http://{{ HA_VIP }}:5000/v2.0 +auth_region = RegionOne +# Turn off verification of the certificate for ssl +# auth_insecure = False +# Certificate Authority public key (CA cert) file for ssl +# auth_ca_cert = +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} + +# Network service endpoint type to pull from the keystone catalog +# endpoint_type = adminURL + +# IP address used by Nova metadata server +nova_metadata_ip = {{ HA_VIP }} + +# TCP Port used by Nova metadata server +nova_metadata_port = 8775 + +# When proxying metadata requests, Neutron signs the Instance-ID header with a +# shared secret to prevent spoofing. You may select any string for a secret, +# but it must match here and in the configuration used by the Nova Metadata +# Server. NOTE: Nova uses a different key: neutron_metadata_proxy_shared_secret +metadata_proxy_shared_secret = {{ METADATA_SECRET }} + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# Number of separate worker processes for metadata server +# metadata_workers = 0 + +# Number of backlog requests to configure the metadata server socket with +# metadata_backlog = 128 + +# URL to connect to the cache backend. +# Example of URL using memory caching backend +# with ttl set to 5 seconds: cache_url = memory://?default_ttl=5 +# default_ttl=0 parameter will cause cache entries to never expire. +# Otherwise default_ttl specifies time in seconds a cache entry is valid for. +# No cache is used in case no value is passed. +# cache_url = diff --git a/compass/deploy/ansible/roles/neutron-network/templates/ml2_conf.ini b/compass/deploy/ansible/roles/neutron-network/templates/ml2_conf.ini new file mode 100644 index 000000000..a7900693e --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/ml2_conf.ini @@ -0,0 +1,108 @@ +[ml2] +# (ListOpt) List of network type driver entrypoints to be loaded from +# the neutron.ml2.type_drivers namespace. +# +# type_drivers = local,flat,vlan,gre,vxlan +# Example: type_drivers = flat,vlan,gre,vxlan +type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }} + +# (ListOpt) Ordered list of network_types to allocate as tenant +# networks. The default value 'local' is useful for single-box testing +# but provides no connectivity between hosts. +# +# tenant_network_types = local +# Example: tenant_network_types = vlan,gre,vxlan +tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} + +# (ListOpt) Ordered list of networking mechanism driver entrypoints +# to be loaded from the neutron.ml2.mechanism_drivers namespace. +# mechanism_drivers = +# Example: mechanism_drivers = openvswitch,mlnx +# Example: mechanism_drivers = arista +# Example: mechanism_drivers = cisco,logger +# Example: mechanism_drivers = openvswitch,brocade +# Example: mechanism_drivers = linuxbridge,brocade +mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }} + +[ml2_type_flat] +# (ListOpt) List of physical_network names with which flat networks +# can be created. Use * to allow flat networks with arbitrary +# physical_network names. +# +flat_networks = external +# Example:flat_networks = physnet1,physnet2 +# Example:flat_networks = * + +[ml2_type_vlan] +# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples +# specifying physical_network names usable for VLAN provider and +# tenant networks, as well as ranges of VLAN tags on each +# physical_network available for allocation as tenant networks. +# +network_vlan_ranges = +# Example: network_vlan_ranges = physnet1:1000:2999,physnet2 + +[ml2_type_gre] +# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation +tunnel_id_ranges = 1:1000 + +[ml2_type_vxlan] +# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating +# ranges of VXLAN VNI IDs that are available for tenant network allocation. +# +vni_ranges = 1001:4095 + +# (StrOpt) Multicast group for the VXLAN interface. When configured, will +# enable sending all broadcast traffic to this multicast group. When left +# unconfigured, will disable multicast VXLAN mode. +# +vxlan_group = 239.1.1.1 +# Example: vxlan_group = 239.1.1.1 + +[securitygroup] +# Controls if neutron security group is enabled or not. +# It should be false when you use nova security group. +# enable_security_group = True +firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver +enable_security_group = True + +[database] +connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8 + +[ovs] +local_ip = {{ internal_ip }} +{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %} +integration_bridge = br-int +tunnel_bridge = br-tun +tunnel_id_ranges = 1001:4095 +tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +bridge_mappings = {{ neutron_ovs_bridge_mappings | default("external:br-ex") }} +{% endif %} + +[agent] +root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf +tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %} +vxlan_udp_port = 4789 +{% endif %} +l2_population = False + +[odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +network_vlan_ranges = 1001:4095 +tunnel_id_ranges = 1001:4095 +tun_peer_patch_port = patch-int +int_peer_patch_port = patch-tun +tenant_network_type = vxlan +tunnel_bridge = br-tun +integration_bridge = br-int +controllers = 10.1.0.15:8080:admin:admin +{% endif %} + +[ml2_odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +username = {{ odl_username }} +password = {{ odl_password }} +url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron +{% endif %} + diff --git a/compass/deploy/ansible/roles/neutron-network/templates/neutron-network.conf b/compass/deploy/ansible/roles/neutron-network/templates/neutron-network.conf new file mode 100644 index 000000000..93be9cbc0 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/neutron-network.conf @@ -0,0 +1,465 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ DEBUG }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-network/templates/neutron.conf b/compass/deploy/ansible/roles/neutron-network/templates/neutron.conf new file mode 100644 index 000000000..15753675e --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/neutron.conf @@ -0,0 +1,466 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ VERBOSE }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant +nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }} + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/neutron-network/templates/neutron_init.sh b/compass/deploy/ansible/roles/neutron-network/templates/neutron_init.sh new file mode 100644 index 000000000..b92e202f2 --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/neutron_init.sh @@ -0,0 +1,4 @@ +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 net-create ext-net --shared --router:external=True + +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 subnet-create ext-net --name ext-subnet --allocation-pool start={{ FLOATING_IP_START }},end={{ FLOATING_IP_END}} --disable-dhcp --gateway {{EXTERNAL_NETWORK_GATEWAY}} {{EXTERNAL_NETWORK_CIDR}} + diff --git a/compass/deploy/ansible/roles/neutron-network/templates/nova.conf b/compass/deploy/ansible/roles/neutron-network/templates/nova.conf new file mode 100644 index 000000000..95870732b --- /dev/null +++ b/compass/deploy/ansible/roles/neutron-network/templates/nova.conf @@ -0,0 +1,69 @@ +[DEFAULT] +dhcpbridge_flagfile=/etc/nova/nova.conf +dhcpbridge=/usr/bin/nova-dhcpbridge +logdir=/var/log/nova +state_path=/var/lib/nova +lock_path=/var/lock/nova +force_dhcp_release=True +iscsi_helper=tgtadm +libvirt_use_virtio_for_bridges=True +connection_type=libvirt +root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf +verbose={{ VERBOSE}} +debug={{ DEBUG }} +ec2_private_dns_show_ip=True +api_paste_config=/etc/nova/api-paste.ini +volumes_path=/var/lib/nova/volumes +enabled_apis=ec2,osapi_compute,metadata + +vif_plugging_is_fatal: false +vif_plugging_timeout: 0 + +auth_strategy = keystone + +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} + +my_ip = {{ internal_ip }} +vnc_enabled = True +vncserver_listen = {{ internal_ip }} +vncserver_proxyclient_address = {{ internal_ip }} +novncproxy_base_url = http://{{ HA_VIP }}:6080/vnc_auto.html + +novncproxy_host = {{ internal_ip }} +novncproxy_port = 6080 + +network_api_class = nova.network.neutronv2.api.API +linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver +firewall_driver = nova.virt.firewall.NoopFirewallDriver +security_group_api = neutron + +instance_usage_audit = True +instance_usage_audit_period = hour +notify_on_state_change = vm_and_task_state +notification_driver = nova.openstack.common.notifier.rpc_notifier +notification_driver = ceilometer.compute.nova_notifier + +[database] +# The SQLAlchemy connection string used to connect to the database +connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = nova +admin_password = {{ NOVA_PASS }} + +[glance] +host = {{ HA_VIP }} + +[neutron] +url = http://{{ HA_VIP }}:9696 +auth_strategy = keystone +admin_tenant_name = service +admin_username = neutron +admin_password = {{ NEUTRON_PASS }} +admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 diff --git a/compass/deploy/ansible/roles/nova-compute/handlers/main.yml b/compass/deploy/ansible/roles/nova-compute/handlers/main.yml new file mode 100644 index 000000000..c1350030f --- /dev/null +++ b/compass/deploy/ansible/roles/nova-compute/handlers/main.yml @@ -0,0 +1,3 @@ +--- +- name: restart nova-compute + service: name=nova-compute state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/nova-compute/tasks/main.yml b/compass/deploy/ansible/roles/nova-compute/tasks/main.yml new file mode 100644 index 000000000..51c8dfaa3 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-compute/tasks/main.yml @@ -0,0 +1,21 @@ +--- +- name: install nova-compute related packages + apt: name=nova-compute-kvm state=present force=yes + +- name: update nova-compute conf + template: src={{ item }} dest=/etc/nova/{{ item }} + with_items: + - nova.conf + - nova-compute.conf + notify: + - restart nova-compute + +- name: generate neutron controll service list + shell: echo {{ item }} >> /opt/service + with_items: + - nova-compute + +- meta: flush_handlers + +- name: remove nova sqlite db + shell: rm /var/lib/nova/nova.sqlite || touch nova.sqlite.removed diff --git a/compass/deploy/ansible/roles/nova-compute/templates/nova-compute.conf b/compass/deploy/ansible/roles/nova-compute/templates/nova-compute.conf new file mode 100644 index 000000000..401dee791 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-compute/templates/nova-compute.conf @@ -0,0 +1,7 @@ +[DEFAULT] +compute_driver=libvirt.LibvirtDriver +force_raw_images = true +[libvirt] +virt_type=qemu +images_type = raw +mem_stats_period_seconds=0 diff --git a/compass/deploy/ansible/roles/nova-compute/templates/nova.conf b/compass/deploy/ansible/roles/nova-compute/templates/nova.conf new file mode 100644 index 000000000..4988cb036 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-compute/templates/nova.conf @@ -0,0 +1,73 @@ +[DEFAULT] +dhcpbridge_flagfile=/etc/nova/nova.conf +dhcpbridge=/usr/bin/nova-dhcpbridge +logdir=/var/log/nova +state_path=/var/lib/nova +lock_path=/var/lock/nova +force_dhcp_release=True +iscsi_helper=tgtadm +libvirt_use_virtio_for_bridges=True +connection_type=libvirt +root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf +verbose={{ VERBOSE}} +debug={{ DEBUG }} +ec2_private_dns_show_ip=True +api_paste_config=/etc/nova/api-paste.ini +volumes_path=/var/lib/nova/volumes +enabled_apis=ec2,osapi_compute,metadata + +vif_plugging_is_fatal: false +vif_plugging_timeout: 0 + +auth_strategy = keystone + +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} + +my_ip = {{ internal_ip }} +vnc_enabled = True +vncserver_listen = {{ internal_ip }} +vncserver_proxyclient_address = {{ internal_ip }} +novncproxy_base_url = http://{{ HA_VIP }}:6080/vnc_auto.html + +novncproxy_host = {{ internal_ip }} +novncproxy_port = 6080 + +network_api_class = nova.network.neutronv2.api.API +linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver +firewall_driver = nova.virt.firewall.NoopFirewallDriver +security_group_api = neutron + +instance_usage_audit = True +instance_usage_audit_period = hour +notify_on_state_change = vm_and_task_state +notification_driver = nova.openstack.common.notifier.rpc_notifier +notification_driver = ceilometer.compute.nova_notifier + +[database] +# The SQLAlchemy connection string used to connect to the database +connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova + +[conductor] +manager = nova.conductor.manager.ConductorManager +topic = conductor + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = nova +admin_password = {{ NOVA_PASS }} + +[glance] +host = {{ HA_VIP }} + +[neutron] +url = http://{{ HA_VIP }}:9696 +auth_strategy = keystone +admin_tenant_name = service +admin_username = neutron +admin_password = {{ NEUTRON_PASS }} +admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 diff --git a/compass/deploy/ansible/roles/nova-controller/handlers/main.yml b/compass/deploy/ansible/roles/nova-controller/handlers/main.yml new file mode 100644 index 000000000..b4c1585d3 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/handlers/main.yml @@ -0,0 +1,24 @@ +--- +- name: restart nova-api + service: name=nova-api state=restarted enabled=yes + +- name: restart nova-cert + service: name=nova-cert state=restarted enabled=yes + +- name: restart nova-consoleauth + service: name=nova-consoleauth state=restarted enabled=yes + +- name: restart nova-scheduler + service: name=nova-scheduler state=restarted enabled=yes + +- name: restart nova-conductor + service: name=nova-conductor state=restarted enabled=yes + +- name: restart nova-novncproxy + service: name=nova-novncproxy state=restarted enabled=yes + +- name: remove nova-sqlite-db + shell: rm /var/lib/nova/nova.sqlite || touch nova.sqlite.db.removed + +- name: restart neutron-server + service: name=neutron-server state=restarted enabled=yes diff --git a/compass/deploy/ansible/roles/nova-controller/tasks/main.yml b/compass/deploy/ansible/roles/nova-controller/tasks/main.yml new file mode 100644 index 000000000..72a9f4d46 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/tasks/main.yml @@ -0,0 +1,13 @@ +--- +- include: nova_install.yml + tags: + - install + - nova_install + - nova + +- include: nova_config.yml + when: HA_CLUSTER is not defined or HA_CLUSTER[inventory_hostname] == '' + tags: + - config + - nova_config + - nova diff --git a/compass/deploy/ansible/roles/nova-controller/tasks/nova_config.yml b/compass/deploy/ansible/roles/nova-controller/tasks/nova_config.yml new file mode 100644 index 000000000..62351faa9 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/tasks/nova_config.yml @@ -0,0 +1,16 @@ +--- +- name: nova db sync + command: su -s /bin/sh -c "nova-manage db sync" nova + register: result + until: result.rc == 0 + retries: 5 + delay: 3 + notify: + - restart nova-api + - restart nova-cert + - restart nova-consoleauth + - restart nova-scheduler + - restart nova-conductor + - restart nova-novncproxy + +- meta: flush_handlers diff --git a/compass/deploy/ansible/roles/nova-controller/tasks/nova_install.yml b/compass/deploy/ansible/roles/nova-controller/tasks/nova_install.yml new file mode 100644 index 000000000..a1cded568 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/tasks/nova_install.yml @@ -0,0 +1,35 @@ +--- +- name: install nova related packages + apt: name={{ item }} state=present force=yes + with_items: + - nova-api + - nova-cert + - nova-conductor + - nova-consoleauth + - nova-novncproxy + - nova-scheduler + - python-novaclient + - python-oslo.rootwrap + +- name: generate nova controll service list + shell: echo {{ item }} >> /opt/service + with_items: + - nova-api + - nova-cert + - nova-conductor + - nova-consoleauth + - nova-novncproxy + - nova-scheduler + +- name: update nova conf + template: src=nova.conf + dest=/etc/nova/nova.conf + backup=yes + notify: + - restart nova-api + - restart nova-cert + - restart nova-consoleauth + - restart nova-scheduler + - restart nova-conductor + - restart nova-novncproxy + - remove nova-sqlite-db diff --git a/compass/deploy/ansible/roles/nova-controller/templates/dhcp_agent.ini b/compass/deploy/ansible/roles/nova-controller/templates/dhcp_agent.ini new file mode 100644 index 000000000..19eb62ec4 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/dhcp_agent.ini @@ -0,0 +1,90 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# The DHCP agent will resync its state with Neutron to recover from any +# transient notification or rpc errors. The interval is number of +# seconds between attempts. +resync_interval = 5 + +# The DHCP agent requires an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins(OVS, Ryu, NEC, NVP, +# BigSwitch/Floodlight) +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Name of Open vSwitch bridge to use +# ovs_integration_bridge = br-int + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# The agent can use other DHCP drivers. Dnsmasq is the simplest and requires +# no additional setup of the DHCP server. +dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# The DHCP server can assist with providing metadata support on isolated +# networks. Setting this value to True will cause the DHCP server to append +# specific host routes to the DHCP request. The metadata service will only +# be activated when the subnet does not contain any router port. The guest +# instance must be configured to request host routes via DHCP (Option 121). +enable_isolated_metadata = False + +# Allows for serving metadata requests coming from a dedicated metadata +# access network whose cidr is 169.254.169.254/16 (or larger prefix), and +# is connected to a Neutron router from which the VMs send metadata +# request. In this case DHCP Option 121 will not be injected in VMs, as +# they will be able to reach 169.254.169.254 through a router. +# This option requires enable_isolated_metadata = True +enable_metadata_network = False + +# Number of threads to use during sync process. Should not exceed connection +# pool size configured on server. +# num_sync_threads = 4 + +# Location to store DHCP server config files +# dhcp_confs = $state_path/dhcp + +# Domain to use for building the hostnames +dhcp_domain = openstacklocal + +# Override the default dnsmasq settings with this file +# dnsmasq_config_file = +dnsmasq_config_file = /etc/neutron/dnsmasq-neutron.conf + +# Comma-separated list of DNS servers which will be used by dnsmasq +# as forwarders. +# dnsmasq_dns_servers = + +# Limit number of leases to prevent a denial-of-service. +dnsmasq_lease_max = 16777216 + +# Location to DHCP lease relay UNIX domain socket +# dhcp_lease_relay_socket = $state_path/dhcp/lease_relay + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# dhcp_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the dhcp agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a dhcp server is disabled. +# dhcp_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/nova-controller/templates/dnsmasq-neutron.conf b/compass/deploy/ansible/roles/nova-controller/templates/dnsmasq-neutron.conf new file mode 100644 index 000000000..7bcbd9df2 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/dnsmasq-neutron.conf @@ -0,0 +1,2 @@ +dhcp-option-force=26,1454 + diff --git a/compass/deploy/ansible/roles/nova-controller/templates/etc/xorp/config.boot b/compass/deploy/ansible/roles/nova-controller/templates/etc/xorp/config.boot new file mode 100644 index 000000000..32caf96dd --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/etc/xorp/config.boot @@ -0,0 +1,25 @@ +interfaces { + restore-original-config-on-shutdown: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + description: "Internal pNodes interface" + disable: false + default-system-config + } +} + +protocols { + igmp { + disable: false + interface {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + vif {{ hostvars[inventory_hostname][neutron_vxlan_interface|default(internal_interface)]['device'] }} { + disable: false + version: 3 + } + } + traceoptions { + flag all { + disable: false + } + } + } +} diff --git a/compass/deploy/ansible/roles/nova-controller/templates/l3_agent.ini b/compass/deploy/ansible/roles/nova-controller/templates/l3_agent.ini new file mode 100644 index 000000000..b394c0082 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/l3_agent.ini @@ -0,0 +1,81 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +# debug = False +verbose = True + +# L3 requires that an interface driver be set. Choose the one that best +# matches your plugin. +# interface_driver = + +# Example of interface_driver option for OVS based plugins (OVS, Ryu, NEC) +# that supports L3 agent +# interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver +interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver + +# Use veth for an OVS interface or not. +# Support kernels with limited namespace support +# (e.g. RHEL 6.5) so long as ovs_use_veth is set to True. +# ovs_use_veth = False + +# Example of interface_driver option for LinuxBridge +# interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver + +# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and +# iproute2 package that supports namespaces). +use_namespaces = True + +# If use_namespaces is set as False then the agent can only configure one router. + +# This is done by setting the specific router_id. +# router_id = + +# When external_network_bridge is set, each L3 agent can be associated +# with no more than one external network. This value should be set to the UUID +# of that external network. To allow L3 agent support multiple external +# networks, both the external_network_bridge and gateway_external_network_id +# must be left empty. +# gateway_external_network_id = + +# Indicates that this L3 agent should also handle routers that do not have +# an external network gateway configured. This option should be True only +# for a single agent in a Neutron deployment, and may be False for all agents +# if all routers must have an external network gateway +handle_internal_only_routers = True + +# Name of bridge used for external network traffic. This should be set to +# empty value for the linux bridge. when this parameter is set, each L3 agent +# can be associated with no more than one external network. +external_network_bridge = br-ex + +# TCP Port used by Neutron metadata server +metadata_port = 9697 + +# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0 +# to disable this feature. +send_arp_for_ha = 3 + +# seconds between re-sync routers' data if needed +periodic_interval = 40 + +# seconds to start to sync routers' data after +# starting agent +periodic_fuzzy_delay = 5 + +# enable_metadata_proxy, which is true by default, can be set to False +# if the Nova metadata server is not available +# enable_metadata_proxy = True + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# router_delete_namespaces, which is false by default, can be set to True if +# namespaces can be deleted cleanly on the host running the L3 agent. +# Do not enable this until you understand the problem with the Linux iproute +# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and +# you are sure that your version of iproute does not suffer from the problem. +# If True, namespaces will be deleted when a router is destroyed. +# router_delete_namespaces = False + +# Timeout for ovs-vsctl commands. +# If the timeout expires, ovs commands will fail with ALARMCLOCK error. +# ovs_vsctl_timeout = 10 diff --git a/compass/deploy/ansible/roles/nova-controller/templates/metadata_agent.ini b/compass/deploy/ansible/roles/nova-controller/templates/metadata_agent.ini new file mode 100644 index 000000000..6badf2877 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/metadata_agent.ini @@ -0,0 +1,46 @@ +[DEFAULT] +# Show debugging output in log (sets DEBUG log level output) +debug = True + +# The Neutron user information for accessing the Neutron API. +auth_url = http://{{ HA_VIP }}:5000/v2.0 +auth_region = RegionOne +# Turn off verification of the certificate for ssl +# auth_insecure = False +# Certificate Authority public key (CA cert) file for ssl +# auth_ca_cert = +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} + +# Network service endpoint type to pull from the keystone catalog +# endpoint_type = adminURL + +# IP address used by Nova metadata server +nova_metadata_ip = {{ HA_VIP }} + +# TCP Port used by Nova metadata server +nova_metadata_port = 8775 + +# When proxying metadata requests, Neutron signs the Instance-ID header with a +# shared secret to prevent spoofing. You may select any string for a secret, +# but it must match here and in the configuration used by the Nova Metadata +# Server. NOTE: Nova uses a different key: neutron_metadata_proxy_shared_secret +metadata_proxy_shared_secret = {{ METADATA_SECRET }} + +# Location of Metadata Proxy UNIX domain socket +# metadata_proxy_socket = $state_path/metadata_proxy + +# Number of separate worker processes for metadata server +# metadata_workers = 0 + +# Number of backlog requests to configure the metadata server socket with +# metadata_backlog = 128 + +# URL to connect to the cache backend. +# Example of URL using memory caching backend +# with ttl set to 5 seconds: cache_url = memory://?default_ttl=5 +# default_ttl=0 parameter will cause cache entries to never expire. +# Otherwise default_ttl specifies time in seconds a cache entry is valid for. +# No cache is used in case no value is passed. +# cache_url = diff --git a/compass/deploy/ansible/roles/nova-controller/templates/ml2_conf.ini b/compass/deploy/ansible/roles/nova-controller/templates/ml2_conf.ini new file mode 100644 index 000000000..a7900693e --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/ml2_conf.ini @@ -0,0 +1,108 @@ +[ml2] +# (ListOpt) List of network type driver entrypoints to be loaded from +# the neutron.ml2.type_drivers namespace. +# +# type_drivers = local,flat,vlan,gre,vxlan +# Example: type_drivers = flat,vlan,gre,vxlan +type_drivers = {{ NEUTRON_TYPE_DRIVERS |join(",") }} + +# (ListOpt) Ordered list of network_types to allocate as tenant +# networks. The default value 'local' is useful for single-box testing +# but provides no connectivity between hosts. +# +# tenant_network_types = local +# Example: tenant_network_types = vlan,gre,vxlan +tenant_network_types = {{ NEUTRON_TENANT_NETWORK_TYPES |join(",") }} + +# (ListOpt) Ordered list of networking mechanism driver entrypoints +# to be loaded from the neutron.ml2.mechanism_drivers namespace. +# mechanism_drivers = +# Example: mechanism_drivers = openvswitch,mlnx +# Example: mechanism_drivers = arista +# Example: mechanism_drivers = cisco,logger +# Example: mechanism_drivers = openvswitch,brocade +# Example: mechanism_drivers = linuxbridge,brocade +mechanism_drivers = {{ NEUTRON_MECHANISM_DRIVERS |join(",") }} + +[ml2_type_flat] +# (ListOpt) List of physical_network names with which flat networks +# can be created. Use * to allow flat networks with arbitrary +# physical_network names. +# +flat_networks = external +# Example:flat_networks = physnet1,physnet2 +# Example:flat_networks = * + +[ml2_type_vlan] +# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples +# specifying physical_network names usable for VLAN provider and +# tenant networks, as well as ranges of VLAN tags on each +# physical_network available for allocation as tenant networks. +# +network_vlan_ranges = +# Example: network_vlan_ranges = physnet1:1000:2999,physnet2 + +[ml2_type_gre] +# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation +tunnel_id_ranges = 1:1000 + +[ml2_type_vxlan] +# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating +# ranges of VXLAN VNI IDs that are available for tenant network allocation. +# +vni_ranges = 1001:4095 + +# (StrOpt) Multicast group for the VXLAN interface. When configured, will +# enable sending all broadcast traffic to this multicast group. When left +# unconfigured, will disable multicast VXLAN mode. +# +vxlan_group = 239.1.1.1 +# Example: vxlan_group = 239.1.1.1 + +[securitygroup] +# Controls if neutron security group is enabled or not. +# It should be false when you use nova security group. +# enable_security_group = True +firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver +enable_security_group = True + +[database] +connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron?charset=utf8 + +[ovs] +local_ip = {{ internal_ip }} +{% if 'openvswitch' in NEUTRON_MECHANISM_DRIVERS %} +integration_bridge = br-int +tunnel_bridge = br-tun +tunnel_id_ranges = 1001:4095 +tunnel_type = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +bridge_mappings = {{ neutron_ovs_bridge_mappings | default("external:br-ex") }} +{% endif %} + +[agent] +root_helper = sudo neutron-rootwrap /etc/neutron/rootwrap.conf +tunnel_types = {{ NEUTRON_TUNNEL_TYPES |join(",") }} +{% if 'vxlan' in NEUTRON_TUNNEL_TYPES %} +vxlan_udp_port = 4789 +{% endif %} +l2_population = False + +[odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +network_vlan_ranges = 1001:4095 +tunnel_id_ranges = 1001:4095 +tun_peer_patch_port = patch-int +int_peer_patch_port = patch-tun +tenant_network_type = vxlan +tunnel_bridge = br-tun +integration_bridge = br-int +controllers = 10.1.0.15:8080:admin:admin +{% endif %} + +[ml2_odl] +{% if 'opendaylight' in NEUTRON_MECHANISM_DRIVERS %} +username = {{ odl_username }} +password = {{ odl_password }} +url = http://{{ controller }}:{{ odl_api_port }}/controller/nb/v2/neutron +{% endif %} + diff --git a/compass/deploy/ansible/roles/nova-controller/templates/neutron-network.conf b/compass/deploy/ansible/roles/nova-controller/templates/neutron-network.conf new file mode 100644 index 000000000..93be9cbc0 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/neutron-network.conf @@ -0,0 +1,465 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ DEBUG }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/nova-controller/templates/neutron.conf b/compass/deploy/ansible/roles/nova-controller/templates/neutron.conf new file mode 100644 index 000000000..15753675e --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/neutron.conf @@ -0,0 +1,466 @@ +[DEFAULT] +# Print more verbose output (set logging level to INFO instead of default WARNING level). +verbose = {{ VERBOSE }} + +# Print debugging output (set logging level to DEBUG instead of default WARNING level). +debug = {{ VERBOSE }} + +# Where to store Neutron state files. This directory must be writable by the +# user executing the agent. +state_path = /var/lib/neutron + +# Where to store lock files +lock_path = $state_path/lock + +# log_format = %(asctime)s %(levelname)8s [%(name)s] %(message)s +# log_date_format = %Y-%m-%d %H:%M:%S + +# use_syslog -> syslog +# log_file and log_dir -> log_dir/log_file +# (not log_file) and log_dir -> log_dir/{binary_name}.log +# use_stderr -> stderr +# (not user_stderr) and (not log_file) -> stdout +# publish_errors -> notification system + +# use_syslog = False +# syslog_log_facility = LOG_USER + +# use_stderr = True +# log_file = +log_dir = /var/log/neutron + +# publish_errors = False + +# Address to bind the API server to +bind_host = {{ network_server_host }} + +# Port the bind the API server to +bind_port = 9696 + +# Path to the extensions. Note that this can be a colon-separated list of +# paths. For example: +# api_extensions_path = extensions:/path/to/more/extensions:/even/more/extensions +# The __path__ of neutron.extensions is appended to this, so if your +# extensions are in there you don't need to specify them here +# api_extensions_path = + +# (StrOpt) Neutron core plugin entrypoint to be loaded from the +# neutron.core_plugins namespace. See setup.cfg for the entrypoint names of the +# plugins included in the neutron source distribution. For compatibility with +# previous versions, the class name of a plugin can be specified instead of its +# entrypoint name. +# +#core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin +core_plugin = ml2 +# Example: core_plugin = ml2 + +# (ListOpt) List of service plugin entrypoints to be loaded from the +# neutron.service_plugins namespace. See setup.cfg for the entrypoint names of +# the plugins included in the neutron source distribution. For compatibility +# with previous versions, the class name of a plugin can be specified instead +# of its entrypoint name. +# +# service_plugins = +# Example: service_plugins = router,firewall,lbaas,vpnaas,metering +service_plugins = router + +# Paste configuration file +api_paste_config = api-paste.ini + +# The strategy to be used for auth. +# Supported values are 'keystone'(default), 'noauth'. +auth_strategy = keystone + +# Base MAC address. The first 3 octets will remain unchanged. If the +# 4h octet is not 00, it will also be used. The others will be +# randomly generated. +# 3 octet +# base_mac = fa:16:3e:00:00:00 +# 4 octet +# base_mac = fa:16:3e:4f:00:00 + +# Maximum amount of retries to generate a unique MAC address +# mac_generation_retries = 16 + +# DHCP Lease duration (in seconds) +dhcp_lease_duration = 86400 + +# Allow sending resource operation notification to DHCP agent +# dhcp_agent_notification = True + +# Enable or disable bulk create/update/delete operations +# allow_bulk = True +# Enable or disable pagination +# allow_pagination = False +# Enable or disable sorting +# allow_sorting = False +# Enable or disable overlapping IPs for subnets +# Attention: the following parameter MUST be set to False if Neutron is +# being used in conjunction with nova security groups +allow_overlapping_ips = True +# Ensure that configured gateway is on subnet +# force_gateway_on_subnet = False + + +# RPC configuration options. Defined in rpc __init__ +# The messaging module to use, defaults to kombu. +# rpc_backend = neutron.openstack.common.rpc.impl_kombu +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_password = {{ RABBIT_PASS }} + +# Size of RPC thread pool +rpc_thread_pool_size = 240 +# Size of RPC connection pool +rpc_conn_pool_size = 100 +# Seconds to wait for a response from call or multicall +rpc_response_timeout = 300 +# Seconds to wait before a cast expires (TTL). Only supported by impl_zmq. +rpc_cast_timeout = 300 +# Modules of exceptions that are permitted to be recreated +# upon receiving exception data from an rpc call. +# allowed_rpc_exception_modules = neutron.openstack.common.exception, nova.exception +# AMQP exchange to connect to if using RabbitMQ or QPID +# control_exchange = neutron + +# If passed, use a fake RabbitMQ provider +# fake_rabbit = False + +# Configuration options if sending notifications via kombu rpc (these are +# the defaults) +# SSL version to use (valid only if SSL enabled) +# kombu_ssl_version = +# SSL key file (valid only if SSL enabled) +# kombu_ssl_keyfile = +# SSL cert file (valid only if SSL enabled) +# kombu_ssl_certfile = +# SSL certification authority file (valid only if SSL enabled) +# kombu_ssl_ca_certs = +# Port where RabbitMQ server is running/listening +rabbit_port = 5672 +# RabbitMQ single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# rabbit_hosts is defaulted to '$rabbit_host:$rabbit_port' +# rabbit_hosts = localhost:5672 +# User ID used for RabbitMQ connections +rabbit_userid = {{ RABBIT_USER }} +# Location of a virtual RabbitMQ installation. +# rabbit_virtual_host = / +# Maximum retries with trying to connect to RabbitMQ +# (the default of 0 implies an infinite retry count) +# rabbit_max_retries = 0 +# RabbitMQ connection retry interval +# rabbit_retry_interval = 1 +# Use HA queues in RabbitMQ (x-ha-policy: all). You need to +# wipe RabbitMQ database when changing this option. (boolean value) +# rabbit_ha_queues = false +# QPID +# rpc_backend=neutron.openstack.common.rpc.impl_qpid +# Qpid broker hostname +# qpid_hostname = localhost +# Qpid broker port +# qpid_port = 5672 +# Qpid single or HA cluster (host:port pairs i.e: host1:5672, host2:5672) +# qpid_hosts is defaulted to '$qpid_hostname:$qpid_port' +# qpid_hosts = localhost:5672 +# Username for qpid connection +# qpid_username = '' +# Password for qpid connection +# qpid_password = '' +# Space separated list of SASL mechanisms to use for auth +# qpid_sasl_mechanisms = '' +# Seconds between connection keepalive heartbeats +# qpid_heartbeat = 60 +# Transport to use, either 'tcp' or 'ssl' +# qpid_protocol = tcp +# Disable Nagle algorithm +# qpid_tcp_nodelay = True + +# ZMQ +# rpc_backend=neutron.openstack.common.rpc.impl_zmq +# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. +# The "host" option should point or resolve to this address. +# rpc_zmq_bind_address = * + +# ============ Notification System Options ===================== + +# Notifications can be sent when network/subnet/port are created, updated or deleted. +# There are three methods of sending notifications: logging (via the +# log_file directive), rpc (via a message queue) and +# noop (no notifications sent, the default) + +# Notification_driver can be defined multiple times +# Do nothing driver +# notification_driver = neutron.openstack.common.notifier.no_op_notifier +# Logging driver +# notification_driver = neutron.openstack.common.notifier.log_notifier +# RPC driver. +notification_driver = neutron.openstack.common.notifier.rpc_notifier + +# default_notification_level is used to form actual topic name(s) or to set logging level +default_notification_level = INFO + +# default_publisher_id is a part of the notification payload +# host = myhost.com +# default_publisher_id = $host + +# Defined in rpc_notifier, can be comma separated values. +# The actual topic names will be %s.%(default_notification_level)s +notification_topics = notifications + +# Default maximum number of items returned in a single response, +# value == infinite and value < 0 means no max limit, and value must +# be greater than 0. If the number of items requested is greater than +# pagination_max_limit, server will just return pagination_max_limit +# of number of items. +# pagination_max_limit = -1 + +# Maximum number of DNS nameservers per subnet +# max_dns_nameservers = 5 + +# Maximum number of host routes per subnet +# max_subnet_host_routes = 20 + +# Maximum number of fixed ips per port +# max_fixed_ips_per_port = 5 + +# =========== items for agent management extension ============= +# Seconds to regard the agent as down; should be at least twice +# report_interval, to be sure the agent is down for good +agent_down_time = 75 +# =========== end of items for agent management extension ===== + +# =========== items for agent scheduler extension ============= +# Driver to use for scheduling network to DHCP agent +network_scheduler_driver = neutron.scheduler.dhcp_agent_scheduler.ChanceScheduler +# Driver to use for scheduling router to a default L3 agent +router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler +# Driver to use for scheduling a loadbalancer pool to an lbaas agent +# loadbalancer_pool_scheduler_driver = neutron.services.loadbalancer.agent_scheduler.ChanceScheduler + +# Allow auto scheduling networks to DHCP agent. It will schedule non-hosted +# networks to first DHCP agent which sends get_active_networks message to +# neutron server +# network_auto_schedule = True + +# Allow auto scheduling routers to L3 agent. It will schedule non-hosted +# routers to first L3 agent which sends sync_routers message to neutron server +# router_auto_schedule = True + +# Number of DHCP agents scheduled to host a network. This enables redundant +# DHCP agents for configured networks. +# dhcp_agents_per_network = 1 + +# =========== end of items for agent scheduler extension ===== + +# =========== WSGI parameters related to the API server ============== +# Number of separate worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as workers. The parent process manages them. +api_workers = 8 + +# Number of separate RPC worker processes to spawn. The default, 0, runs the +# worker thread in the current process. Greater than 0 launches that number of +# child processes as RPC workers. The parent process manages them. +# This feature is experimental until issues are addressed and testing has been +# enabled for various plugins for compatibility. +rpc_workers = 8 + +# Sets the value of TCP_KEEPIDLE in seconds to use for each server socket when +# starting API server. Not supported on OS X. +# tcp_keepidle = 600 + +# Number of seconds to keep retrying to listen +# retry_until_window = 30 + +# Number of backlog requests to configure the socket with. +# backlog = 4096 + +# Max header line to accommodate large tokens +# max_header_line = 16384 + +# Enable SSL on the API server +# use_ssl = False + +# Certificate file to use when starting API server securely +# ssl_cert_file = /path/to/certfile + +# Private key file to use when starting API server securely +# ssl_key_file = /path/to/keyfile + +# CA certificate file to use when starting API server securely to +# verify connecting clients. This is an optional parameter only required if +# API clients need to authenticate to the API server using SSL certificates +# signed by a trusted CA +# ssl_ca_file = /path/to/cafile +# ======== end of WSGI parameters related to the API server ========== + + +# ======== neutron nova interactions ========== +# Send notification to nova when port status is active. +notify_nova_on_port_status_changes = True + +# Send notifications to nova when port data (fixed_ips/floatingips) change +# so nova can update it's cache. +notify_nova_on_port_data_changes = True + +# URL for connection to nova (Only supports one nova region currently). +nova_url = http://{{ HA_VIP }}:8774/v2 + +# Name of nova region to use. Useful if keystone manages more than one region +nova_region_name = RegionOne + +# Username for connection to nova in admin context +nova_admin_username = nova + +# The uuid of the admin nova tenant +nova_admin_tenant_id = {{ NOVA_ADMIN_TENANT_ID.stdout_lines[0] }} + +# Password for connection to nova in admin context. +nova_admin_password = {{ NOVA_PASS }} + +# Authorization URL for connection to nova in admin context. +nova_admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 + +# Number of seconds between sending events to nova if there are any events to send +send_events_interval = 2 + +# ======== end of neutron nova interactions ========== + +[quotas] +# Default driver to use for quota checks +quota_driver = neutron.db.quota_db.DbQuotaDriver + +# Resource name(s) that are supported in quota features +quota_items = network,subnet,port + +# Default number of resource allowed per tenant. A negative value means +# unlimited. +default_quota = -1 + +# Number of networks allowed per tenant. A negative value means unlimited. +quota_network = 100 + +# Number of subnets allowed per tenant. A negative value means unlimited. +quota_subnet = 100 + +# Number of ports allowed per tenant. A negative value means unlimited. +quota_port = 8000 + +# Number of security groups allowed per tenant. A negative value means +# unlimited. +quota_security_group = 1000 + +# Number of security group rules allowed per tenant. A negative value means +# unlimited. +quota_security_group_rule = 1000 + +# Number of vips allowed per tenant. A negative value means unlimited. +# quota_vip = 10 + +# Number of pools allowed per tenant. A negative value means unlimited. +# quota_pool = 10 + +# Number of pool members allowed per tenant. A negative value means unlimited. +# The default is unlimited because a member is not a real resource consumer +# on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_member = -1 + +# Number of health monitors allowed per tenant. A negative value means +# unlimited. +# The default is unlimited because a health monitor is not a real resource +# consumer on Openstack. However, on back-end, a member is a resource consumer +# and that is the reason why quota is possible. +# quota_health_monitors = -1 + +# Number of routers allowed per tenant. A negative value means unlimited. +# quota_router = 10 + +# Number of floating IPs allowed per tenant. A negative value means unlimited. +# quota_floatingip = 50 + +[agent] +# Use "sudo neutron-rootwrap /etc/neutron/rootwrap.conf" to use the real +# root filter facility. +# Change to "sudo" to skip the filtering and just run the comand directly +root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf" + +# =========== items for agent management extension ============= +# seconds between nodes reporting state to server; should be less than +# agent_down_time, best if it is half or less than agent_down_time +report_interval = 30 + +# =========== end of items for agent management extension ===== + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/v2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = neutron +admin_password = {{ NEUTRON_PASS }} +signing_dir = $state_path/keystone-signing + +[database] +# This line MUST be changed to actually run the plugin. +# Example: +# connection = mysql://root:pass@127.0.0.1:3306/neutron +# Replace 127.0.0.1 above with the IP address of the database used by the +# main neutron server. (Leave it as is if the database runs on this host.) +# connection = sqlite:////var/lib/neutron/neutron.sqlite +#connection = mysql://neutron:{{ NEUTRON_DBPASS }}@{{ db_host }}/neutron + +# The SQLAlchemy connection string used to connect to the slave database +slave_connection = + +# Database reconnection retry times - in event connectivity is lost +# set to -1 implies an infinite retry count +max_retries = 10 + +# Database reconnection interval in seconds - if the initial connection to the +# database fails +retry_interval = 10 + +# Minimum number of SQL connections to keep open in a pool +min_pool_size = 1 + +# Maximum number of SQL connections to keep open in a pool +max_pool_size = 100 + +# Timeout in seconds before idle sql connections are reaped +idle_timeout = 3600 + +# If set, use this value for max_overflow with sqlalchemy +max_overflow = 100 + +# Verbosity of SQL debugging information. 0=None, 100=Everything +connection_debug = 0 + +# Add python stack traces to SQL as comment strings +connection_trace = False + +# If set, use this value for pool_timeout with sqlalchemy +pool_timeout = 10 + +[service_providers] +# Specify service providers (drivers) for advanced services like loadbalancer, VPN, Firewall. +# Must be in form: +# service_provider=<service_type>:<name>:<driver>[:default] +# List of allowed service types includes LOADBALANCER, FIREWALL, VPN +# Combination of <service type> and <name> must be unique; <driver> must also be unique +# This is multiline option, example for default provider: +# service_provider=LOADBALANCER:name:lbaas_plugin_driver_path:default +# example of non-default provider: +# service_provider=FIREWALL:name2:firewall_driver_path +# --- Reference implementations --- +service_provider=LOADBALANCER:Haproxy:neutron.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default +service_provider=VPN:openswan:neutron.services.vpn.service_drivers.ipsec.IPsecVPNDriver:default +# In order to activate Radware's lbaas driver you need to uncomment the next line. +# If you want to keep the HA Proxy as the default lbaas driver, remove the attribute default from the line below. +# Otherwise comment the HA Proxy line +# service_provider = LOADBALANCER:Radware:neutron.services.loadbalancer.drivers.radware.driver.LoadBalancerDriver:default +# uncomment the following line to make the 'netscaler' LBaaS provider available. +# service_provider=LOADBALANCER:NetScaler:neutron.services.loadbalancer.drivers.netscaler.netscaler_driver.NetScalerPluginDriver +# Uncomment the following line (and comment out the OpenSwan VPN line) to enable Cisco's VPN driver. +# service_provider=VPN:cisco:neutron.services.vpn.service_drivers.cisco_ipsec.CiscoCsrIPsecVPNDriver:default +# Uncomment the line below to use Embrane heleos as Load Balancer service provider. +# service_provider=LOADBALANCER:Embrane:neutron.services.loadbalancer.drivers.embrane.driver.EmbraneLbaas:default diff --git a/compass/deploy/ansible/roles/nova-controller/templates/neutron_init.sh b/compass/deploy/ansible/roles/nova-controller/templates/neutron_init.sh new file mode 100644 index 000000000..b92e202f2 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/neutron_init.sh @@ -0,0 +1,4 @@ +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 net-create ext-net --shared --router:external=True + +# neutron --os-username=admin --os-password={{ ADMIN_PASS }} --os-tenant-name=admin --os-auth-url=http://{{ identity_host }}:35357/v2.0 subnet-create ext-net --name ext-subnet --allocation-pool start={{ FLOATING_IP_START }},end={{ FLOATING_IP_END}} --disable-dhcp --gateway {{EXTERNAL_NETWORK_GATEWAY}} {{EXTERNAL_NETWORK_CIDR}} + diff --git a/compass/deploy/ansible/roles/nova-controller/templates/nova.conf b/compass/deploy/ansible/roles/nova-controller/templates/nova.conf new file mode 100644 index 000000000..c8991a302 --- /dev/null +++ b/compass/deploy/ansible/roles/nova-controller/templates/nova.conf @@ -0,0 +1,72 @@ +[DEFAULT] +dhcpbridge_flagfile=/etc/nova/nova.conf +dhcpbridge=/usr/bin/nova-dhcpbridge +logdir=/var/log/nova +state_path=/var/lib/nova +lock_path=/var/lock/nova +force_dhcp_release=True +iscsi_helper=tgtadm +libvirt_use_virtio_for_bridges=True +connection_type=libvirt +root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf +verbose={{ VERBOSE}} +debug={{ DEBUG }} +ec2_private_dns_show_ip=True +api_paste_config=/etc/nova/api-paste.ini +volumes_path=/var/lib/nova/volumes +enabled_apis=osapi_compute,metadata + +vif_plugging_is_fatal: false +vif_plugging_timeout: 0 + +auth_strategy = keystone + +rpc_backend = rabbit +rabbit_host = {{ rabbit_host }} +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} + +osapi_compute_listen={{ internal_ip }} +metadata_listen={{ internal_ip }} + +my_ip = {{ internal_ip }} +vnc_enabled = True +vncserver_listen = {{ internal_ip }} +vncserver_proxyclient_address = {{ internal_ip }} +novncproxy_base_url = http://{{ HA_VIP }}:6080/vnc_auto.html + +novncproxy_host = {{ internal_ip }} +novncproxy_port = 6080 + +network_api_class = nova.network.neutronv2.api.API +linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver +firewall_driver = nova.virt.firewall.NoopFirewallDriver +security_group_api = neutron + +instance_usage_audit = True +instance_usage_audit_period = hour +notify_on_state_change = vm_and_task_state +notification_driver = nova.openstack.common.notifier.rpc_notifier +notification_driver = ceilometer.compute.nova_notifier + +[database] +# The SQLAlchemy connection string used to connect to the database +connection = mysql://nova:{{ NOVA_DBPASS }}@{{ db_host }}/nova + +[keystone_authtoken] +auth_uri = http://{{ HA_VIP }}:5000/2.0 +identity_uri = http://{{ HA_VIP }}:35357 +admin_tenant_name = service +admin_user = nova +admin_password = {{ NOVA_PASS }} + +[glance] +host = {{ HA_VIP }} + +[neutron] +url = http://{{ HA_VIP }}:9696 +auth_strategy = keystone +admin_tenant_name = service +admin_username = neutron +admin_password = {{ NEUTRON_PASS }} +admin_auth_url = http://{{ HA_VIP }}:35357/v2.0 diff --git a/compass/deploy/ansible/roles/repo/tasks/main.yml b/compass/deploy/ansible/roles/repo/tasks/main.yml new file mode 100644 index 000000000..9476f80af --- /dev/null +++ b/compass/deploy/ansible/roles/repo/tasks/main.yml @@ -0,0 +1,6 @@ +--- +- name: add juno cloudarchive + apt_repository: repo="{{ juno_cloud_archive }}" state=present + +- name: first update pkgs + apt: update_cache=yes diff --git a/compass/deploy/ansible/roles/repo/templates/sources.list b/compass/deploy/ansible/roles/repo/templates/sources.list new file mode 100644 index 000000000..8b062e749 --- /dev/null +++ b/compass/deploy/ansible/roles/repo/templates/sources.list @@ -0,0 +1 @@ +{{ LOCAL_REPO }} |