aboutsummaryrefslogtreecommitdiffstats
path: root/build/f_isoroot
diff options
context:
space:
mode:
Diffstat (limited to 'build/f_isoroot')
-rw-r--r--build/f_isoroot/Makefile33
-rw-r--r--build/f_isoroot/README16
-rw-r--r--build/f_isoroot/cache.mk37
-rw-r--r--build/f_isoroot/f_bootstrap/Makefile48
-rw-r--r--build/f_isoroot/f_bootstrap/README24
-rwxr-xr-xbuild/f_isoroot/f_bootstrap/bootstrap_admin_node.sh266
-rwxr-xr-xbuild/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig246
-rwxr-xr-xbuild/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh4
-rwxr-xr-xbuild/f_isoroot/f_bootstrap/post-scripts/03_install_repo.sh19
-rwxr-xr-xbuild/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh4
-rw-r--r--build/f_isoroot/f_kscfg/Makefile44
-rw-r--r--build/f_isoroot/f_kscfg/README18
-rw-r--r--build/f_isoroot/f_kscfg/ks.cfg609
-rw-r--r--build/f_isoroot/f_kscfg/ks.cfg.orig602
-rw-r--r--build/f_isoroot/f_odlpluginbuild/Makefile73
-rw-r--r--build/f_isoroot/f_odlpluginbuild/config/opendaylight_config.yaml52
-rw-r--r--build/f_isoroot/f_repobuild/Makefile86
-rwxr-xr-xbuild/f_isoroot/f_repobuild/select_ubuntu_repo.sh33
18 files changed, 2214 insertions, 0 deletions
diff --git a/build/f_isoroot/Makefile b/build/f_isoroot/Makefile
new file mode 100644
index 000000000..3831a09f0
--- /dev/null
+++ b/build/f_isoroot/Makefile
@@ -0,0 +1,33 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+SUBDIRS = f_kscfg f_bootstrap f_repobuild f_odlpluginbuild
+SUBCLEAN = $(addsuffix .clean,$(SUBDIRS))
+
+.PHONY: all
+all: $(SUBDIRS)
+
+.PHONY: $(SUBDIRS)
+$(SUBDIRS):
+ @mkdir -p release
+ $(MAKE) -C $@ -f Makefile release
+
+.PHONY: clean $(SUBCLEAN)
+clean: $(SUBCLEAN)
+ @rm -Rf release
+
+$(SUBCLEAN): %.clean:
+ $(MAKE) -C $* -f Makefile clean
+
+.PHONY: release
+release: $(SUBDIRS)
+ @cp -Rvp release/* ../release/isoroot
+
+include cache.mk
diff --git a/build/f_isoroot/README b/build/f_isoroot/README
new file mode 100644
index 000000000..eb54c0827
--- /dev/null
+++ b/build/f_isoroot/README
@@ -0,0 +1,16 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This is to (a) replace/patch existing Fuel ISO files as well
+as adding new information directly into the ISO structure
+
+Please separate changes into "patches" and new content into
+"additions". Both directories will be anchored at the ISO file
+root.
diff --git a/build/f_isoroot/cache.mk b/build/f_isoroot/cache.mk
new file mode 100644
index 000000000..2df3b6bd1
--- /dev/null
+++ b/build/f_isoroot/cache.mk
@@ -0,0 +1,37 @@
+##############################################################################
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+#############################################################################
+# Cache operations - only used when building through ci/build.sh
+#
+# This file is only meant for a top Makefile which is only calling its
+# own SUBDIRS, without building any cachable artifact by itself.
+#############################################################################
+
+# Call sub caches
+SUBGETCACHE = $(addsuffix .getcache,$(SUBDIRS))
+$(SUBGETCACHE): %.getcache:
+ $(MAKE) -C $* -f Makefile get-cache
+
+SUBPUTCACHE = $(addsuffix .putcache,$(SUBDIRS))
+$(SUBPUTCACHE): %.putcache:
+ $(MAKE) -C $* -f Makefile put-cache
+
+SUBCLEANCACHE = $(addsuffix .cleancache,$(SUBDIRS))
+$(SUBCLEANCACHE): %.cleancache:
+ $(MAKE) -C $* -f Makefile clean-cache
+
+.PHONY: get-cache
+get-cache: $(SUBGETCACHE)
+
+.PHONY: put-cache
+put-cache: $(SUBPUTCACHE)
+
+.PHONY: clean-cache
+clean-cache: $(SUBCLEANCACHE)
diff --git a/build/f_isoroot/f_bootstrap/Makefile b/build/f_isoroot/f_bootstrap/Makefile
new file mode 100644
index 000000000..a958aa2d6
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/Makefile
@@ -0,0 +1,48 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+
+.PHONY: all
+all:
+ @mkdir -p release/opnfv/bootstrap/pre.d
+ @mkdir -p release/opnfv/bootstrap/post.d
+ @mkdir -p release/usr/local/sbin
+ @cp pre-scripts/* release/opnfv/bootstrap/pre.d
+ @cp post-scripts/* release/opnfv/bootstrap/post.d
+ @cp bootstrap_admin_node.sh release
+ @cp bootstrap_admin_node.sh.orig release
+
+.PHONY: clean
+clean:
+ @rm -rf release
+
+.PHONY: release
+release:all
+ @cp -Rvp release/* ../release
+
+#############################################################################
+# Cache operations - only used when building through ci/build.sh
+#############################################################################
+
+# Clean local data related to caching - called prior to ordinary build
+.PHONY: clean-cache
+clean-cache: clean
+ @echo "clean-cache not implemented"
+
+# Try to download cache - called prior to ordinary build
+.PHONY: get-cache
+get-cache:
+ @echo "get-cache not implemented"
+
+# Store cache if not already stored - called after ordinary build
+.PHONY: put-cache
+put-cache:
+ @echo "put-cache not implemented"
diff --git a/build/f_isoroot/f_bootstrap/README b/build/f_isoroot/f_bootstrap/README
new file mode 100644
index 000000000..5da954ca4
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/README
@@ -0,0 +1,24 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This function modifies the adds hooks to the beginning and end of
+/usr/local/sbin/bootstrap_admin_nodes.sh, which is run as the
+last post step from ks.cfg
+
+This enables other functions to place scripts into two directories
+run either at the beginning or the end of the bootstrap procedure:
+
+ /opt/opnfv/bootstrap/pre.d
+ /opt/opnfv/bootstrap/post.d
+
+These will be run in lexical order at pre or post.
+
+CI note: Using pre.d, it would be possible to "inject" a pre-defined
+astute.yaml for Fuel.
diff --git a/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh b/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
new file mode 100755
index 000000000..065d0cb7d
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh
@@ -0,0 +1,266 @@
+#!/bin/bash
+FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ')
+
+function countdown() {
+ local i
+ sleep 1
+ for ((i=$1-1; i>=1; i--)); do
+ printf '\b\b\b\b%04d' "$i"
+ sleep 1
+ done
+}
+
+function fail() {
+ echo "ERROR: Fuel node deployment FAILED! Check /var/log/puppet/bootstrap_admin_node.log for details" 1>&2
+ exit 1
+}
+# LANG variable is a workaround for puppet-3.4.2 bug. See LP#1312758 for details
+export LANG=en_US.UTF8
+export ADMIN_INTERFACE=eth0
+
+showmenu="no"
+if [ -f /etc/fuel/bootstrap_admin_node.conf ]; then
+ . /etc/fuel/bootstrap_admin_node.conf
+ echo "Applying admin interface '$ADMIN_INTERFACE'"
+fi
+
+echo "Applying default Fuel settings..."
+set -x
+fuelmenu --save-only --iface=$ADMIN_INTERFACE
+set +x
+echo "Done!"
+
+### OPNFV addition BEGIN
+shopt -s nullglob
+for script in /opt/opnfv/bootstrap/pre.d/*.sh
+do
+ echo "Pre script: $script" >> /root/pre.log 2>&1
+ $script >> /root/pre.log 2>&1
+done
+shopt -u nullglob
+### OPNFV addition END
+
+if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
+ fuelmenu
+ else
+ #Give user 15 seconds to enter fuelmenu or else continue
+ echo
+ echo -n "Press a key to enter Fuel Setup (or press ESC to skip)... 15"
+ countdown 15 & pid=$!
+ if ! read -s -n 1 -t 15 key; then
+ echo -e "\nSkipping Fuel Setup..."
+ else
+ { kill "$pid"; wait $!; } 2>/dev/null
+ case "$key" in
+ $'\e') echo "Skipping Fuel Setup.."
+ ;;
+ *) echo -e "\nEntering Fuel Setup..."
+ fuelmenu
+ ;;
+ esac
+ fi
+fi
+
+if [ "$wait_for_external_config" == "yes" ]; then
+ wait_timeout=3000
+ pidfile=/var/lock/wait_for_external_config
+ echo -n "Waiting for external configuration (or press ESC to skip)...
+$wait_timeout"
+ countdown $wait_timeout & countdown_pid=$!
+ exec -a wait_for_external_config sleep $wait_timeout & wait_pid=$!
+ echo $wait_pid > $pidfile
+ while ps -p $countdown_pid &> /dev/null && ps -p $wait_pid &>/dev/null; do
+ read -s -n 1 -t 2 key
+ case "$key" in
+ $'\e') echo -e "\b\b\b\b abort on user input"
+ break
+ ;;
+ *) ;;
+ esac
+ done
+ { kill $countdown_pid $wait_pid & wait $!; }
+ rm -f $pidfile
+fi
+
+
+#Reread /etc/sysconfig/network to inform puppet of changes
+. /etc/sysconfig/network
+hostname "$HOSTNAME"
+
+# XXX: ssh keys which should be included into the bootstrap image are
+# generated during containers deployment. However cobbler checkfs for
+# a kernel and initramfs when creating a profile, which poses chicken
+# and egg problem. Fortunately cobbler is pretty happy with empty files
+# so it's easy to break the loop.
+make_ubuntu_bootstrap_stub () {
+ local bootstrap_dir='/var/www/nailgun/bootstrap/ubuntu'
+ mkdir -p $bootstrap_dir
+ for item in linux initramfs.img; do
+ touch "$bootstrap_dir/$item"
+ done
+}
+
+get_bootstrap_flavor () {
+ local ASTUTE_YAML='/etc/fuel/astute.yaml'
+ python <<-EOF
+ from fuelmenu.fuelmenu import Settings
+ conf = Settings().read("$ASTUTE_YAML").get('BOOTSTRAP', {})
+ print(conf.get('flavor', 'centos'))
+ EOF
+}
+
+# Actually build the bootstrap image
+build_ubuntu_bootstrap () {
+ local ret=1
+ local max_attempts=3
+ local config='/etc/fuel-bootstrap-image.conf'
+ local log='/var/log/fuel-bootstrap-image-build.log'
+ if ! grep -qE '^BOOTSTRAP_SSH_KEYS' "$config"; then
+ # FIXME: config file generated by fuelmenu has no trailing newline
+ echo >> "$config"
+ cat >> "$config" <<-EOF
+ BOOTSTRAP_SSH_KEYS=/root/.ssh/id_rsa.pub
+ EOF
+ fi
+ for n in `seq 1 $max_attempts`; do
+ echo "Bulding bootstrap image, attempt $n" >&2
+ if fuel-bootstrap-image >>"$log" 2>&1; then
+ ret=0
+ fuel-bootstrap-image-set "ubuntu"
+ break
+ fi
+ done
+ if [ $ret -ne 0 ]; then
+ warning="WARNING: failed to build the bootstrap image, see $log for details.
+Perhaps your Internet connection is broken. Please fix the problem and run
+\`fuel-bootstrap-image-set ubuntu\`"
+ fuel notify --topic warning --send "$warning"
+ fi
+ return $ret
+}
+
+
+# Create empty files to make cobbler happy
+# (even if we don't use Ubuntu based bootstrap)
+make_ubuntu_bootstrap_stub
+
+service docker start
+
+if [ -f /root/.build_images ]; then
+ #Fail on all errors
+ set -e
+ trap fail EXIT
+
+ echo "Loading Fuel base image for Docker..."
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+
+ echo "Building Fuel Docker images..."
+ WORKDIR=$(mktemp -d /tmp/docker-buildXXX)
+ SOURCE=/var/www/nailgun/docker
+ REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND')
+ RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2)
+
+ for imagesource in /var/www/nailgun/docker/sources/*; do
+ if ! [ -f "$imagesource/Dockerfile" ]; then
+ echo "Skipping ${imagesource}..."
+ continue
+ fi
+ image=$(basename "$imagesource")
+ cp -R "$imagesource" $WORKDIR/$image
+ mkdir -p $WORKDIR/$image/etc
+ cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc
+ sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile
+ sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml
+ docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image
+ done
+ docker rm -f $REPO_CONT_ID
+ rm -rf "$WORKDIR"
+
+ #Remove trap for normal deployment
+ trap - EXIT
+ set +e
+else
+ echo "Loading docker images. (This may take a while)"
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+fi
+
+# apply puppet
+puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
+if [ $? -ge 4 ];then
+ fail
+fi
+
+rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote
+
+dockerctl check || fail
+bash /etc/rc.local
+
+if [ "`get_bootstrap_flavor`" = "ubuntu" ]; then
+ build_ubuntu_bootstrap || true
+fi
+
+### OPNFV addition BEGIN
+shopt -s nullglob
+for script in /opt/opnfv/bootstrap/post.d/*.sh
+do
+ echo "Post script: $script" >> /root/post.log 2>&1
+ $script >> /root/post.log 2>&1
+done
+shopt -u nullglob
+### OPNFV addition END
+
+# Enable updates repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF
+[mos${FUEL_RELEASE}-updates]
+name=mos${FUEL_RELEASE}-updates
+baseurl=http://mirror.fuel-infra.org/mos-repos/centos/mos${FUEL_RELEASE}-centos6-fuel/updates/x86_64/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+# Enable security repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF
+[mos${FUEL_RELEASE}-security]
+name=mos${FUEL_RELEASE}-security
+baseurl=http://mirror.fuel-infra.org/mos-repos/centos/mos${FUEL_RELEASE}-centos6-fuel/security/x86_64/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+#Check if repo is accessible
+echo "Checking for access to updates repository..."
+repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1)
+if urlaccesscheck check "$repourl" ; then
+ UPDATE_ISSUES=0
+else
+ UPDATE_ISSUES=1
+fi
+
+if [ $UPDATE_ISSUES -eq 1 ]; then
+ message="There is an issue connecting to the Fuel update repository. \
+Please fix your connection prior to applying any updates. \
+Once the connection is fixed, we recommend reviewing and applying \
+Maintenance Updates for this release of Mirantis OpenStack: \
+https://docs.mirantis.com/openstack/fuel/fuel-${FUEL_RELEASE}/\
+release-notes.html#maintenance-updates"
+ level="warning"
+else
+ message="We recommend reviewing and applying Maintenance Updates \
+for this release of Mirantis OpenStack: \
+https://docs.mirantis.com/openstack/fuel/fuel-${FUEL_RELEASE}/\
+release-notes.html#maintenance-updates"
+ level="done"
+fi
+echo
+echo "*************************************************"
+echo -e "${message}"
+echo "*************************************************"
+echo "Sending notification to Fuel UI..."
+fuel notify --topic "${level}" --send "${message}"
+
+# TODO(kozhukalov) If building of bootstrap image fails
+# and if this image was supposed to be a default bootstrap image
+# we need to warn a user about this and give her
+# advice how to treat this.
+
+echo "Fuel node deployment complete!"
diff --git a/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig b/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
new file mode 100755
index 000000000..1bc349314
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/bootstrap_admin_node.sh.orig
@@ -0,0 +1,246 @@
+#!/bin/bash
+FUEL_RELEASE=$(grep release: /etc/fuel/version.yaml | cut -d: -f2 | tr -d '" ')
+
+function countdown() {
+ local i
+ sleep 1
+ for ((i=$1-1; i>=1; i--)); do
+ printf '\b\b\b\b%04d' "$i"
+ sleep 1
+ done
+}
+
+function fail() {
+ echo "ERROR: Fuel node deployment FAILED! Check /var/log/puppet/bootstrap_admin_node.log for details" 1>&2
+ exit 1
+}
+# LANG variable is a workaround for puppet-3.4.2 bug. See LP#1312758 for details
+export LANG=en_US.UTF8
+export ADMIN_INTERFACE=eth0
+
+showmenu="no"
+if [ -f /etc/fuel/bootstrap_admin_node.conf ]; then
+ . /etc/fuel/bootstrap_admin_node.conf
+ echo "Applying admin interface '$ADMIN_INTERFACE'"
+fi
+
+echo "Applying default Fuel settings..."
+set -x
+fuelmenu --save-only --iface=$ADMIN_INTERFACE
+set +x
+echo "Done!"
+
+if [[ "$showmenu" == "yes" || "$showmenu" == "YES" ]]; then
+ fuelmenu
+ else
+ #Give user 15 seconds to enter fuelmenu or else continue
+ echo
+ echo -n "Press a key to enter Fuel Setup (or press ESC to skip)... 15"
+ countdown 15 & pid=$!
+ if ! read -s -n 1 -t 15 key; then
+ echo -e "\nSkipping Fuel Setup..."
+ else
+ { kill "$pid"; wait $!; } 2>/dev/null
+ case "$key" in
+ $'\e') echo "Skipping Fuel Setup.."
+ ;;
+ *) echo -e "\nEntering Fuel Setup..."
+ fuelmenu
+ ;;
+ esac
+ fi
+fi
+
+if [ "$wait_for_external_config" == "yes" ]; then
+ wait_timeout=3000
+ pidfile=/var/lock/wait_for_external_config
+ echo -n "Waiting for external configuration (or press ESC to skip)...
+$wait_timeout"
+ countdown $wait_timeout & countdown_pid=$!
+ exec -a wait_for_external_config sleep $wait_timeout & wait_pid=$!
+ echo $wait_pid > $pidfile
+ while ps -p $countdown_pid &> /dev/null && ps -p $wait_pid &>/dev/null; do
+ read -s -n 1 -t 2 key
+ case "$key" in
+ $'\e') echo -e "\b\b\b\b abort on user input"
+ break
+ ;;
+ *) ;;
+ esac
+ done
+ { kill $countdown_pid $wait_pid & wait $!; }
+ rm -f $pidfile
+fi
+
+
+#Reread /etc/sysconfig/network to inform puppet of changes
+. /etc/sysconfig/network
+hostname "$HOSTNAME"
+
+# XXX: ssh keys which should be included into the bootstrap image are
+# generated during containers deployment. However cobbler checkfs for
+# a kernel and initramfs when creating a profile, which poses chicken
+# and egg problem. Fortunately cobbler is pretty happy with empty files
+# so it's easy to break the loop.
+make_ubuntu_bootstrap_stub () {
+ local bootstrap_dir='/var/www/nailgun/bootstrap/ubuntu'
+ mkdir -p $bootstrap_dir
+ for item in linux initramfs.img; do
+ touch "$bootstrap_dir/$item"
+ done
+}
+
+get_bootstrap_flavor () {
+ local ASTUTE_YAML='/etc/fuel/astute.yaml'
+ python <<-EOF
+ from fuelmenu.fuelmenu import Settings
+ conf = Settings().read("$ASTUTE_YAML").get('BOOTSTRAP', {})
+ print(conf.get('flavor', 'centos'))
+ EOF
+}
+
+# Actually build the bootstrap image
+build_ubuntu_bootstrap () {
+ local ret=1
+ local max_attempts=3
+ local config='/etc/fuel-bootstrap-image.conf'
+ local log='/var/log/fuel-bootstrap-image-build.log'
+ if ! grep -qE '^BOOTSTRAP_SSH_KEYS' "$config"; then
+ # FIXME: config file generated by fuelmenu has no trailing newline
+ echo >> "$config"
+ cat >> "$config" <<-EOF
+ BOOTSTRAP_SSH_KEYS=/root/.ssh/id_rsa.pub
+ EOF
+ fi
+ for n in `seq 1 $max_attempts`; do
+ echo "Bulding bootstrap image, attempt $n" >&2
+ if fuel-bootstrap-image >>"$log" 2>&1; then
+ ret=0
+ fuel-bootstrap-image-set "ubuntu"
+ break
+ fi
+ done
+ if [ $ret -ne 0 ]; then
+ warning="WARNING: failed to build the bootstrap image, see $log for details.
+Perhaps your Internet connection is broken. Please fix the problem and run
+\`fuel-bootstrap-image-set ubuntu\`"
+ fuel notify --topic warning --send "$warning"
+ fi
+ return $ret
+}
+
+
+# Create empty files to make cobbler happy
+# (even if we don't use Ubuntu based bootstrap)
+make_ubuntu_bootstrap_stub
+
+service docker start
+
+if [ -f /root/.build_images ]; then
+ #Fail on all errors
+ set -e
+ trap fail EXIT
+
+ echo "Loading Fuel base image for Docker..."
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+
+ echo "Building Fuel Docker images..."
+ WORKDIR=$(mktemp -d /tmp/docker-buildXXX)
+ SOURCE=/var/www/nailgun/docker
+ REPO_CONT_ID=$(docker -D run -d -p 80 -v /var/www/nailgun:/var/www/nailgun fuel/centos sh -c 'mkdir /var/www/html/os;ln -sf /var/www/nailgun/centos/x86_64 /var/www/html/os/x86_64;/usr/sbin/apachectl -DFOREGROUND')
+ RANDOM_PORT=$(docker port $REPO_CONT_ID 80 | cut -d':' -f2)
+
+ for imagesource in /var/www/nailgun/docker/sources/*; do
+ if ! [ -f "$imagesource/Dockerfile" ]; then
+ echo "Skipping ${imagesource}..."
+ continue
+ fi
+ image=$(basename "$imagesource")
+ cp -R "$imagesource" $WORKDIR/$image
+ mkdir -p $WORKDIR/$image/etc
+ cp -R /etc/puppet /etc/fuel $WORKDIR/$image/etc
+ sed -e "s/_PORT_/${RANDOM_PORT}/" -i $WORKDIR/$image/Dockerfile
+ sed -e 's/production:.*/production: "docker-build"/' -i $WORKDIR/$image/etc/fuel/version.yaml
+ docker build -t fuel/${image}_${FUEL_RELEASE} $WORKDIR/$image
+ done
+ docker rm -f $REPO_CONT_ID
+ rm -rf "$WORKDIR"
+
+ #Remove trap for normal deployment
+ trap - EXIT
+ set +e
+else
+ echo "Loading docker images. (This may take a while)"
+ docker load -i /var/www/nailgun/docker/images/fuel-images.tar
+fi
+
+# apply puppet
+puppet apply --detailed-exitcodes -d -v /etc/puppet/modules/nailgun/examples/host-only.pp
+if [ $? -ge 4 ];then
+ fail
+fi
+
+rmdir /var/log/remote && ln -s /var/log/docker-logs/remote /var/log/remote
+
+dockerctl check || fail
+bash /etc/rc.local
+
+if [ "`get_bootstrap_flavor`" = "ubuntu" ]; then
+ build_ubuntu_bootstrap || true
+fi
+
+# Enable updates repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-updates.repo << EOF
+[mos${FUEL_RELEASE}-updates]
+name=mos${FUEL_RELEASE}-updates
+baseurl=http://mirror.fuel-infra.org/mos-repos/centos/mos${FUEL_RELEASE}-centos6-fuel/updates/x86_64/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+# Enable security repository
+cat > /etc/yum.repos.d/mos${FUEL_RELEASE}-security.repo << EOF
+[mos${FUEL_RELEASE}-security]
+name=mos${FUEL_RELEASE}-security
+baseurl=http://mirror.fuel-infra.org/mos-repos/centos/mos${FUEL_RELEASE}-centos6-fuel/security/x86_64/
+gpgcheck=0
+skip_if_unavailable=1
+EOF
+
+#Check if repo is accessible
+echo "Checking for access to updates repository..."
+repourl=$(grep baseurl /etc/yum.repos.d/*updates* 2>/dev/null | cut -d'=' -f2- | head -1)
+if urlaccesscheck check "$repourl" ; then
+ UPDATE_ISSUES=0
+else
+ UPDATE_ISSUES=1
+fi
+
+if [ $UPDATE_ISSUES -eq 1 ]; then
+ message="There is an issue connecting to the Fuel update repository. \
+Please fix your connection prior to applying any updates. \
+Once the connection is fixed, we recommend reviewing and applying \
+Maintenance Updates for this release of Mirantis OpenStack: \
+https://docs.mirantis.com/openstack/fuel/fuel-${FUEL_RELEASE}/\
+release-notes.html#maintenance-updates"
+ level="warning"
+else
+ message="We recommend reviewing and applying Maintenance Updates \
+for this release of Mirantis OpenStack: \
+https://docs.mirantis.com/openstack/fuel/fuel-${FUEL_RELEASE}/\
+release-notes.html#maintenance-updates"
+ level="done"
+fi
+echo
+echo "*************************************************"
+echo -e "${message}"
+echo "*************************************************"
+echo "Sending notification to Fuel UI..."
+fuel notify --topic "${level}" --send "${message}"
+
+# TODO(kozhukalov) If building of bootstrap image fails
+# and if this image was supposed to be a default bootstrap image
+# we need to warn a user about this and give her
+# advice how to treat this.
+
+echo "Fuel node deployment complete!"
diff --git a/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh b/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh
new file mode 100755
index 000000000..7ac896589
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/post-scripts/00_post_example.sh
@@ -0,0 +1,4 @@
+#/bin/sh
+date
+echo "This is an example file run at post-bootstrap."
+exit 0
diff --git a/build/f_isoroot/f_bootstrap/post-scripts/03_install_repo.sh b/build/f_isoroot/f_bootstrap/post-scripts/03_install_repo.sh
new file mode 100755
index 000000000..427a55add
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/post-scripts/03_install_repo.sh
@@ -0,0 +1,19 @@
+#/bin/sh
+echo "Installing pre-build repo"
+if [ ! -d /opt/opnfv/nailgun ]; then
+ echo "Error - found no repo!"
+ exit 1
+fi
+
+mkdir -p /var/www/nailgun
+mv /opt/opnfv/nailgun/* /var/www/nailgun
+if [ $? -ne 0 ]; then
+ echo "Error moving repos to their correct location!"
+ exit 1
+fi
+rmdir /opt/opnfv/nailgun
+if [ $? -ne 0 ]; then
+ echo "Error removing /opt/opnfv/nailgun directory!"
+ exit 1
+fi
+echo "Done installing pre-build repo"
diff --git a/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh b/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh
new file mode 100755
index 000000000..ac427bf87
--- /dev/null
+++ b/build/f_isoroot/f_bootstrap/pre-scripts/00_pre_example.sh
@@ -0,0 +1,4 @@
+#/bin/sh
+date
+echo "This is an example file run at pre-bootstrap."
+exit 0
diff --git a/build/f_isoroot/f_kscfg/Makefile b/build/f_isoroot/f_kscfg/Makefile
new file mode 100644
index 000000000..fe740418d
--- /dev/null
+++ b/build/f_isoroot/f_kscfg/Makefile
@@ -0,0 +1,44 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+
+.PHONY: all
+all:
+ @mkdir -p release
+ @cp ks.cfg release
+ @cp ks.cfg.orig release
+
+.PHONY: clean
+clean:
+ @rm -rf release
+
+.PHONY: release
+release: all
+ @cp -Rvp release/* ../release
+
+#############################################################################
+# Cache operations - only used when building through ci/build.sh
+#############################################################################
+
+# Clean local data related to caching - called prior to ordinary build
+.PHONY: clean-cache
+clean-cache: clean
+ @echo "clean-cache not implemented"
+
+# Try to download cache - called prior to ordinary build
+.PHONY: get-cache
+get-cache:
+ @echo "get-cache not implemented"
+
+# Store cache if not already stored - called after ordinary build
+.PHONY: put-cache
+put-cache:
+ @echo "put-cache not implemented"
diff --git a/build/f_isoroot/f_kscfg/README b/build/f_isoroot/f_kscfg/README
new file mode 100644
index 000000000..c85efde77
--- /dev/null
+++ b/build/f_isoroot/f_kscfg/README
@@ -0,0 +1,18 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+This function modifies the ks.cfg of the Fuel master to
+make copy whatever is in the top level opnfv directory
+of the ISO (populated by, for example, f_configfrontend) to
+/opt/opnfv. In the end this is where the installation
+parts will evolve.
+
+This is also the place to force the installation to overwrite
+the disk (set forceformat="yes" instead of "no").
diff --git a/build/f_isoroot/f_kscfg/ks.cfg b/build/f_isoroot/f_kscfg/ks.cfg
new file mode 100644
index 000000000..8c20971f8
--- /dev/null
+++ b/build/f_isoroot/f_kscfg/ks.cfg
@@ -0,0 +1,609 @@
+install
+text
+%include /tmp/source.ks
+reboot --eject
+lang en_US.UTF-8
+keyboard us
+rootpw r00tme
+timezone --utc Etc/UTC
+firewall --disabled
+selinux --disabled
+# ignore unsupported hardware warning
+unsupported_hardware
+# SKIP CONFIGURING X
+skipx
+# NEVER ever place zerombr here, it breaks automated installation
+%include /tmp/bootloader.ks
+%include /tmp/partition.ks
+
+# PREINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE
+# INSTALLATION PROCESS ITSELF
+%pre
+#!/bin/sh
+
+# hard drives
+drives=""
+removable_drives=""
+for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
+ if !(blkid | grep -q "${drv}.*Fuel"); then
+ if (grep -q 0 /sys/block/${drv}/removable); then
+ drives="${drives} ${drv}"
+ else
+ removable_drives="${removable_drives} ${drv}"
+ fi
+ fi
+done
+default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
+
+installdrive="undefined"
+forceformat="no"
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+set ${drives} ${removable_drives}
+numdrives=`echo $#`
+
+tgtdrive="${installdrive}"
+
+function confirm_format {
+ check_drive="$1"
+ local confirm_format="no"
+
+ if [[ "$forceformat" == "yes" ]] ; then
+ return 0
+ fi
+
+ if parted -s /dev/$check_drive print &>/dev/null ; then
+ echo
+ echo "$check_drive drive contains partition table:"
+ parted -s /dev/$check_drive print
+ echo
+ read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format
+ if [[ "$confirm_format" == "y" ]] || [[ "$confirm_format" == "Y" ]] || [[ "$forceformat" == "yes" ]]; then
+ return 0
+ else
+ return 1
+ fi
+ else
+ return 0
+ fi
+}
+
+format_confirmed="no"
+
+if [ $numdrives -lt 1 ]; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* There is no suitable media available for installation. *'
+ echo '* Please attach a drive and try again. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to shut down the system: " _
+ poweroff
+fi
+
+if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ while [ "${tgtdrive}" = "undefined" ]; do
+ clear
+ echo
+ echo '********************************************************************************'
+ echo '* W A R N I N G *'
+ echo '* *'
+ echo '* Which of the detected hard drives do you want to be used as *'
+ echo '* the installation target? *'
+ echo '* *'
+ echo '********************************************************************************'
+ echo
+ echo "Possible choices"
+ echo "Persistent drives: ${drives}"
+ echo "Removable drives: ${removable_drives}"
+ echo
+ if [ `echo ${drives} | wc -w` -eq 1 ] ; then
+ read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive
+ else
+ read -p "Choose hard drive: " tgtdrive
+ fi
+ match="no"
+ for drive in ${drives[@]} ${removable_drives[@]}; do
+ if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then
+ if confirm_format $tgtdrive ; then
+ format_confirmed="yes"
+ break
+ else
+ tgtdrive="undefined"
+ read -p "You may select another disk. Press Enter to continue." _
+ fi
+ fi
+ done
+ if [[ "$match" == "no" ]]; then
+ tgtdrive="undefined"
+ read -p "Invalid choice. Press Enter to continue." _
+ fi
+ done
+ clear
+ chvt 1
+else
+ tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"`
+fi
+
+if [ "$format_confirmed" != "yes" ] ; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ if ! confirm_format $tgtdrive ; then
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* Disk $tgtdrive contains active partition(s). *'
+ echo '* Installation cannot continue without confirmation. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to restart: " _
+ reboot
+ fi
+ chvt 1
+fi
+
+# verify tgtdrive is at least 41GB
+tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
+if [ $tgtdrivesize -lt 41984 ]; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* Your disk is under 41GB in size. Installation cannot continue. *'
+ echo '* Restart installation with a larger disk. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to restart: " _
+ reboot
+fi
+
+# paths in /dev have "/" instead of "!" for cciss devices
+tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
+
+# source
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+ echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
+else
+ echo "cdrom" > /tmp/source.ks
+fi
+
+vgremove -ff os
+dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10
+sleep 3
+hdparm -z /dev/${tgtdrive}
+parted -s /dev/${tgtdrive} mklabel gpt
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24
+parted -s /dev/${tgtdrive} set 1 bios_grub on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224
+parted -s /dev/${tgtdrive} set 2 boot on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424
+sleep 3
+hdparm -z /dev/${tgtdrive}
+
+# partition
+
+# This adds support for the p seperator required for cciss devices
+if echo ${tgtdrive} | grep -q -e cciss ; then
+ bootdev=${tgtdrive}p
+else
+ bootdev=${tgtdrive}
+fi
+echo > /tmp/partition.ks
+echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
+echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks
+echo "volgroup os pv.001" >> /tmp/partition.ks
+echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
+echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
+
+
+# bootloader
+echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+
+# Anaconda can not install grub 0.97 on disks which are >4T.
+# The reason is that grub does not support such large geometries
+# and it simply thinks that the cylinder number has negative value.
+# Here we just set geometry manually so that grub thinks that disk
+# size is equal to 1G.
+# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G
+echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks
+echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks
+
+%end
+
+%packages --nobase --excludedocs
+@Core
+fuel
+fuel-library >= 7.0
+fuel-dockerctl
+authconfig
+bind-utils
+cronie
+crontabs
+curl
+daemonize
+dhcp
+docker-io
+fuel-bootstrap-image
+fuel-bootstrap-image-builder
+fuel-createmirror
+fuel-target-centos-images6.6
+fuel-package-updates
+fuelmenu
+fuel-docker-images
+gdisk
+lrzip
+lsof
+man
+mlocate
+nmap-ncat
+ntp
+ntpdate
+openssh-clients
+policycoreutils
+python-daemon
+rsync
+ruby21-puppet
+ruby21-rubygem-netaddr
+ruby21-rubygem-openstack
+selinux-policy-targeted
+strace
+subscription-manager
+sysstat
+system-config-firewall-base
+tcpdump
+telnet
+vim-enhanced
+virt-what
+wget
+yum
+yum-plugin-priorities
+
+%include /tmp/post_partition.ks
+
+# POSTINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER
+# INSTALLATION ITSELF COMPLETED
+%post
+echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules
+chmod +x /etc/rc.modules
+echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf
+mkdir -p /var/log/coredump
+echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf
+chmod 777 /var/log/coredump
+echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf
+
+# Mount installation media in chroot
+%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
+#!/bin/sh
+
+set -x
+
+SOURCE="/mnt/sysimage/tmp/source"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+mkdir -p "${SOURCE}"
+
+case "${repo}" in
+ nfs:*)
+ nfs_url="${repo#nfs:}"
+ mount -t nfs "${nfs_url}" "${SOURCE}"
+ ;;
+ *)
+ if [ -d "/mnt/source" ]; then
+ mount -o bind "/mnt/source" "${SOURCE}"
+ fi
+ ;;
+esac
+
+%post --log=/root/anaconda-post-after-chroot.log
+#!/bin/bash
+
+set -x
+
+function save_cfg {
+ scrFile="/etc/sysconfig/network-scripts/ifcfg-$admin_interface"
+ search="domain $domain\nsearch $domain"
+ sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network
+ grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts
+ echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf
+ [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf
+ [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream
+ [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf
+ [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream
+
+ echo DEVICE=$admin_interface > $scrFile
+ echo ONBOOT=yes >> $scrFile
+ echo NM_CONTROLLED=no >> $scrFile
+ echo HWADDR=$hwaddr >> $scrFile
+ echo USERCTL=no >> $scrFile
+ echo PEERDNS=no >> $scrFile
+ if [ $ip ]; then
+ echo BOOTPROTO=static >> $scrFile
+ echo IPADDR=$ip >> $scrFile
+ echo NETMASK=$netmask >> $scrFile
+ else
+ echo BOOTPROTO=dhcp >> $scrFile
+ fi
+ scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface"
+ #Ignore gateway and set up DHCP if it is used, otherwise apply it
+ if [ $dhcp_interface ] && [ "$dhcp_interface" != "$admin_interface" ]; then
+ echo "DEVICE=$dhcp_interface" > $scrDHCPFile
+ echo "BOOTPROTO=dhcp" >> $scrDHCPFile
+ echo "ONBOOT=yes" >> $scrDHCPFile
+ echo "USERCTL=no" >> $scrDHCPFile
+ else
+ echo GATEWAY=$gw >> /etc/sysconfig/network
+ fi
+ [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images
+}
+
+# Default FQDN
+hostname="nailgun.mirantis.com"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+hostname=$hostname
+domain=${hostname#*.}
+ip=$ip
+netmask=$netmask
+gw=$gw
+admin_interface=${admin_interface:-"eth0"}
+hwaddr=`ifconfig $admin_interface | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
+dhcp_interface=$dhcp_interface
+build_images=$build_images
+wait_for_external_config=$wait_for_external_config
+save_cfg
+
+# Mounting installation source
+SOURCE=/tmp/source
+FS=/tmp/fs
+
+echo
+mkdir -p ${SOURCE}
+mkdir -p ${FS}
+
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE}
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+ mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
+ mount -o loop ${FS}/nailgun.iso ${SOURCE}
+fi
+
+OPENSTACK_VERSION=`cat ${SOURCE}/openstack_version`
+
+# ----------------------
+# UNPACKING REPOSITORIES
+# ----------------------
+
+wwwdir="/var/www/nailgun"
+repodir="${wwwdir}/${OPENSTACK_VERSION}"
+
+# Copying Centos files
+mkdir -p ${repodir}/centos/x86_64
+cp -r ${SOURCE}/images ${repodir}/centos/x86_64
+cp -r ${SOURCE}/isolinux ${repodir}/centos/x86_64
+cp -r ${SOURCE}/repodata ${repodir}/centos/x86_64
+cp -r ${SOURCE}/Packages ${repodir}/centos/x86_64
+cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
+
+# Copying Ubuntu files
+mkdir -p ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
+
+# We do not ship debian-installer kernel and initrd on ISO.
+# But we still need to be able to create ubuntu cobbler distro
+# which requires kernel and initrd to be available. So, we
+# just touch these files to work around cobbler's limitation.
+touch ${repodir}/ubuntu/x86_64/images/linux
+touch ${repodir}/ubuntu/x86_64/images/initrd.gz
+
+# make links for backward compatibility
+ln -s ${repodir}/centos ${wwwdir}/centos
+ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
+
+# --------------------------
+# UNPACKING PUPPET MANIFESTS
+# --------------------------
+
+# create folders
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+#rm -rf /etc/puppet/modules/
+
+# TODO(ikalnitsky): investigate why we need this
+#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+
+# place modules and manifests
+#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
+
+# make links for backward compatibility
+#pushd /etc/puppet
+#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+#popd
+
+cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
+mkdir -p /var/lib/hiera
+touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
+
+# Prepare local repository specification
+rm /etc/yum.repos.d/CentOS*.repo
+cat > /etc/yum.repos.d/nailgun.repo << EOF
+[nailgun]
+name=Nailgun Local Repo
+baseurl=file:/var/www/nailgun/${OPENSTACK_VERSION}/centos/x86_64
+gpgcheck=0
+EOF
+
+# Disable subscription-manager plugins
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || :
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || :
+
+# Disable GSSAPI in ssh server config
+sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+
+# Enable MOTD banner in sshd
+sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config
+
+# Add note regarding local repos creation to MOTD
+cat >> /etc/motd << EOF
+
+All environments use online repositories by default.
+Use the following commands to create local repositories
+on master node and change default repository settings:
+
+* CentOS: fuel-package-updates (see --help for options)
+* Ubuntu: fuel-createmirror (see --help for options)
+
+Please refer to the following guide for more information:
+https://docs.mirantis.com/openstack/fuel/fuel-7.0/reference-architecture.html#fuel-rep-mirror
+
+EOF
+
+# Copying bootstrap_admin_node.sh, chmod it and
+# adding /etc/init/bootstrap_admin_node.conf
+cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
+chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh
+cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf
+echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node
+
+# Copying version.yaml file. It contains COMMIT_SHA of last commit.
+RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml)
+mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions
+cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml
+ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat ${SOURCE}/openstack_version`.yaml
+
+# Generete Fuel UUID
+uuidgen > /etc/fuel/fuel-uuid
+
+# Run fuel menu
+[ -z "$showmenu" ] && showmenu="no"
+
+# Pause during bootstrap_admin_node to wait for external config
+[ -z "$wait_for_external_config" ] && wait_for_external_config="no"
+
+
+# Prepare bootstrap_admin_node config
+cat > /etc/fuel/bootstrap_admin_node.conf << EOF
+#Set to yes to run Fuel Setup
+#Set to no to accept default settings
+ADMIN_INTERFACE=${admin_interface}
+showmenu=${showmenu}
+wait_for_external_config=${wait_for_external_config}
+EOF
+
+# Prepare custom /etc/issue logon banner and script for changing IP in it
+cat > /etc/issue << EOF
+#########################################
+# Welcome to the Fuel server #
+#########################################
+Server is running on \m platform
+
+Fuel UI is available on:
+https://:8443
+
+Default administrator login: root
+Default administrator password: r00tme
+
+Default Fuel UI login: admin
+Default Fuel UI password: admin
+
+Please change root password on first login.
+
+EOF
+
+
+cat >> '/etc/rc.local' << EOF
+first=yes
+for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do
+if [ "\$first" = "yes" ]; then
+ ipstr="Fuel UI is available on: https://\$ip:8443"
+ first=no
+else
+ ipstr=\$(printf "%s\n%25s%s" "\$ipstr" " " "https://\$ip:8443")
+fi
+done
+tmpissue=\$(mktemp)
+while read -r line; do
+ if [[ "\$line" =~ "Fuel UI is available on" ]]; then
+ echo -e "\$ipstr" >> \$tmpissue
+ elif [[ "\$line" =~ :8443$ ]]; then
+ :
+ else
+ echo -e "\$line" >> \$tmpissue
+ fi
+done < /etc/issue
+mv "\$tmpissue" /etc/issue
+
+EOF
+
+######### OPNFV addition BEGIN ############
+# Copy data into /opt/opnfv
+# TODO: This ought to be a package instead!
+mkdir -p /opt/opnfv
+cp -r ${SOURCE}/opnfv /opt
+cp ${SOURCE}/gitinfo.txt /
+######### OPNFV addition END ############
+
+# Unmounting source
+umount -f ${SOURCE}
+rm -rf ${SOURCE}
+
+umount -f ${FS} || true
+rm -rf ${FS}
+
+echo "tos orphan 7" >> /etc/ntp.conf
+
+# Do not show error message on ntpdate failure. Customers should not be confused
+# if admin node does not have access to the internet time servers.
+sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/'
+
+# Disabling splash
+sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf
+sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf
+
+# Disabling console clearing
+sed -i 's/getty/getty --noclear/' /etc/init/tty.conf
+
+# Disabling starting first console from start-ttys service
+sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init
+
+# Copying default bash settings to the root directory
+cp -f /etc/skel/.bash* /root/
+
+# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors
+[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf
+
+%end
diff --git a/build/f_isoroot/f_kscfg/ks.cfg.orig b/build/f_isoroot/f_kscfg/ks.cfg.orig
new file mode 100644
index 000000000..148ef9908
--- /dev/null
+++ b/build/f_isoroot/f_kscfg/ks.cfg.orig
@@ -0,0 +1,602 @@
+install
+text
+%include /tmp/source.ks
+reboot --eject
+lang en_US.UTF-8
+keyboard us
+rootpw r00tme
+timezone --utc Etc/UTC
+firewall --disabled
+selinux --disabled
+# ignore unsupported hardware warning
+unsupported_hardware
+# SKIP CONFIGURING X
+skipx
+# NEVER ever place zerombr here, it breaks automated installation
+%include /tmp/bootloader.ks
+%include /tmp/partition.ks
+
+# PREINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED BEFORE
+# INSTALLATION PROCESS ITSELF
+%pre
+#!/bin/sh
+
+# hard drives
+drives=""
+removable_drives=""
+for drv in `ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`; do
+ if !(blkid | grep -q "${drv}.*Fuel"); then
+ if (grep -q 0 /sys/block/${drv}/removable); then
+ drives="${drives} ${drv}"
+ else
+ removable_drives="${removable_drives} ${drv}"
+ fi
+ fi
+done
+default_drive=`echo ${drives} ${removable_drives} | awk '{print $1}'`
+
+installdrive="undefined"
+forceformat="no"
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+set ${drives} ${removable_drives}
+numdrives=`echo $#`
+
+tgtdrive="${installdrive}"
+
+function confirm_format {
+ check_drive="$1"
+ local confirm_format="no"
+
+ if [[ "$forceformat" == "yes" ]] ; then
+ return 0
+ fi
+
+ if parted -s /dev/$check_drive print &>/dev/null ; then
+ echo
+ echo "$check_drive drive contains partition table:"
+ parted -s /dev/$check_drive print
+ echo
+ read -p "Are you sure you want to erase ALL data on disk $check_drive? (y/N)" confirm_format
+ if [[ "$confirm_format" == "y" ]] || [[ "$confirm_format" == "Y" ]] || [[ "$forceformat" == "yes" ]]; then
+ return 0
+ else
+ return 1
+ fi
+ else
+ return 0
+ fi
+}
+
+format_confirmed="no"
+
+if [ $numdrives -lt 1 ]; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* There is no suitable media available for installation. *'
+ echo '* Please attach a drive and try again. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to shut down the system: " _
+ poweroff
+fi
+
+if [ ${numdrives} -gt 1 ] || [ `echo ${drives} | wc -w` -eq 0 ] ; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ while [ "${tgtdrive}" = "undefined" ]; do
+ clear
+ echo
+ echo '********************************************************************************'
+ echo '* W A R N I N G *'
+ echo '* *'
+ echo '* Which of the detected hard drives do you want to be used as *'
+ echo '* the installation target? *'
+ echo '* *'
+ echo '********************************************************************************'
+ echo
+ echo "Possible choices"
+ echo "Persistent drives: ${drives}"
+ echo "Removable drives: ${removable_drives}"
+ echo
+ if [ `echo ${drives} | wc -w` -eq 1 ] ; then
+ read -t 30 -p "Choose hard drive: " tgtdrive || tgtdrive=$default_drive
+ else
+ read -p "Choose hard drive: " tgtdrive
+ fi
+ match="no"
+ for drive in ${drives[@]} ${removable_drives[@]}; do
+ if [[ "$drive" == "$tgtdrive" ]] && match="yes" ; then
+ if confirm_format $tgtdrive ; then
+ format_confirmed="yes"
+ break
+ else
+ tgtdrive="undefined"
+ read -p "You may select another disk. Press Enter to continue." _
+ fi
+ fi
+ done
+ if [[ "$match" == "no" ]]; then
+ tgtdrive="undefined"
+ read -p "Invalid choice. Press Enter to continue." _
+ fi
+ done
+ clear
+ chvt 1
+else
+ tgtdrive=`echo ${drives} | sed -e "s/^\s*//" -e "s/\s*$//"`
+fi
+
+if [ "$format_confirmed" != "yes" ] ; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ if ! confirm_format $tgtdrive ; then
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* Disk $tgtdrive contains active partition(s). *'
+ echo '* Installation cannot continue without confirmation. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to restart: " _
+ reboot
+ fi
+ chvt 1
+fi
+
+# verify tgtdrive is at least 41GB
+tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 ))
+if [ $tgtdrivesize -lt 41984 ]; then
+ exec < /dev/tty3 > /dev/tty3 2>&1
+ chvt 3
+ clear
+ echo
+ echo '********************************************************************'
+ echo '* E R R O R *'
+ echo '* *'
+ echo '* Your disk is under 41GB in size. Installation cannot continue. *'
+ echo '* Restart installation with a larger disk. *'
+ echo '* *'
+ echo '********************************************************************'
+ echo
+ read -p "Press Enter to restart: " _
+ reboot
+fi
+
+# paths in /dev have "/" instead of "!" for cciss devices
+tgtdrive=$(echo $tgtdrive | sed -e 's/!/\//')
+
+# source
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ echo "harddrive --partition=LABEL="OpenStack_Fuel" --dir=/" > /tmp/source.ks
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+ echo "harddrive --partition=UUID=will_be_substituted_with_actual_uuid --dir=/" > /tmp/source.ks
+else
+ echo "cdrom" > /tmp/source.ks
+fi
+
+vgremove -ff os
+dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10
+sleep 3
+hdparm -z /dev/${tgtdrive}
+parted -s /dev/${tgtdrive} mklabel gpt
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24
+parted -s /dev/${tgtdrive} set 1 bios_grub on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224
+parted -s /dev/${tgtdrive} set 2 boot on
+parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424
+sleep 3
+hdparm -z /dev/${tgtdrive}
+
+# partition
+
+# This adds support for the p seperator required for cciss devices
+if echo ${tgtdrive} | grep -q -e cciss ; then
+ bootdev=${tgtdrive}p
+else
+ bootdev=${tgtdrive}
+fi
+echo > /tmp/partition.ks
+echo "partition /boot --onpart=/dev/${bootdev}3" >> /tmp/partition.ks
+echo "partition /boot/efi --onpart=/dev/${bootdev}2" >> /tmp/partition.ks
+echo "partition pv.001 --ondisk=${tgtdrive} --size=41000 --grow" >> /tmp/partition.ks
+echo "volgroup os pv.001" >> /tmp/partition.ks
+echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks
+echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var --vgname=os --size=10000 --percent 30 --grow --name=var --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/lib/docker --vgname=os --size=17000 --percent 20 --grow --name=varlibdocker --fstype=ext4" >> /tmp/partition.ks
+echo "logvol /var/log --vgname=os --size=4096 --percent 50 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks
+
+
+# bootloader
+echo "bootloader --location=partition --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks
+
+# Anaconda can not install grub 0.97 on disks which are >4T.
+# The reason is that grub does not support such large geometries
+# and it simply thinks that the cylinder number has negative value.
+# Here we just set geometry manually so that grub thinks that disk
+# size is equal to 1G.
+# 130 cylinders * (16065 * 512 = 8225280 bytes) = 1G
+echo "%post --nochroot --log=/mnt/sysimage/root/anaconda-post-partition.log" > /tmp/post_partition.ks
+echo "echo \"device (hd0) /dev/${tgtdrive}\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"geometry (hd0) 130 255 63\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"root (hd0,2)\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo \"install /grub/stage1 (hd0) /grub/stage2 p /grub/grub.conf\" >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "echo quit >> /tmp/grub.script" >> /tmp/post_partition.ks
+echo "cat /tmp/grub.script | chroot /mnt/sysimage /sbin/grub --no-floppy --batch" >> /tmp/post_partition.ks
+
+%end
+
+%packages --nobase --excludedocs
+@Core
+fuel
+fuel-library >= 7.0
+fuel-dockerctl
+authconfig
+bind-utils
+cronie
+crontabs
+curl
+daemonize
+dhcp
+docker-io
+fuel-bootstrap-image
+fuel-bootstrap-image-builder
+fuel-createmirror
+fuel-target-centos-images6.6
+fuel-package-updates
+fuelmenu
+fuel-docker-images
+gdisk
+lrzip
+lsof
+man
+mlocate
+nmap-ncat
+ntp
+ntpdate
+openssh-clients
+policycoreutils
+python-daemon
+rsync
+ruby21-puppet
+ruby21-rubygem-netaddr
+ruby21-rubygem-openstack
+selinux-policy-targeted
+strace
+subscription-manager
+sysstat
+system-config-firewall-base
+tcpdump
+telnet
+vim-enhanced
+virt-what
+wget
+yum
+yum-plugin-priorities
+
+%include /tmp/post_partition.ks
+
+# POSTINSTALL SECTION
+# HERE ARE COMMANDS THAT WILL BE LAUNCHED JUST AFTER
+# INSTALLATION ITSELF COMPLETED
+%post
+echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules
+chmod +x /etc/rc.modules
+echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf
+mkdir -p /var/log/coredump
+echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf
+chmod 777 /var/log/coredump
+echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf
+
+# Mount installation media in chroot
+%post --nochroot --log=/mnt/sysimage/root/anaconda-post-before-chroot.log
+#!/bin/sh
+
+set -x
+
+SOURCE="/mnt/sysimage/tmp/source"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+
+mkdir -p "${SOURCE}"
+
+case "${repo}" in
+ nfs:*)
+ nfs_url="${repo#nfs:}"
+ mount -t nfs "${nfs_url}" "${SOURCE}"
+ ;;
+ *)
+ if [ -d "/mnt/source" ]; then
+ mount -o bind "/mnt/source" "${SOURCE}"
+ fi
+ ;;
+esac
+
+%post --log=/root/anaconda-post-after-chroot.log
+#!/bin/bash
+
+set -x
+
+function save_cfg {
+ scrFile="/etc/sysconfig/network-scripts/ifcfg-$admin_interface"
+ search="domain $domain\nsearch $domain"
+ sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network
+ grep -q "^\s*$ip\s+$hostname" /etc/hosts || echo "$ip $hostname" >> /etc/hosts
+ echo "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf
+ [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf
+ [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream
+ [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf
+ [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream
+
+ echo DEVICE=$admin_interface > $scrFile
+ echo ONBOOT=yes >> $scrFile
+ echo NM_CONTROLLED=no >> $scrFile
+ echo HWADDR=$hwaddr >> $scrFile
+ echo USERCTL=no >> $scrFile
+ echo PEERDNS=no >> $scrFile
+ if [ $ip ]; then
+ echo BOOTPROTO=static >> $scrFile
+ echo IPADDR=$ip >> $scrFile
+ echo NETMASK=$netmask >> $scrFile
+ else
+ echo BOOTPROTO=dhcp >> $scrFile
+ fi
+ scrDHCPFile="/etc/sysconfig/network-scripts/ifcfg-$dhcp_interface"
+ #Ignore gateway and set up DHCP if it is used, otherwise apply it
+ if [ $dhcp_interface ] && [ "$dhcp_interface" != "$admin_interface" ]; then
+ echo "DEVICE=$dhcp_interface" > $scrDHCPFile
+ echo "BOOTPROTO=dhcp" >> $scrDHCPFile
+ echo "ONBOOT=yes" >> $scrDHCPFile
+ echo "USERCTL=no" >> $scrDHCPFile
+ else
+ echo GATEWAY=$gw >> /etc/sysconfig/network
+ fi
+ [ -n "$build_images" -a "$build_images" != "0" ] && echo -e "$build_images" > /root/.build_images
+}
+
+# Default FQDN
+hostname="nailgun.mirantis.com"
+
+for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done
+hostname=$hostname
+domain=${hostname#*.}
+ip=$ip
+netmask=$netmask
+gw=$gw
+admin_interface=${admin_interface:-"eth0"}
+hwaddr=`ifconfig $admin_interface | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'`
+dhcp_interface=$dhcp_interface
+build_images=$build_images
+wait_for_external_config=$wait_for_external_config
+save_cfg
+
+# Mounting installation source
+SOURCE=/tmp/source
+FS=/tmp/fs
+
+echo
+mkdir -p ${SOURCE}
+mkdir -p ${FS}
+
+if test -e /dev/disk/by-label/"OpenStack_Fuel"; then
+ mount /dev/disk/by-label/"OpenStack_Fuel" ${SOURCE}
+elif test -e /dev/disk/by-uuid/will_be_substituted_with_actual_uuid; then
+ mount /dev/disk/by-uuid/will_be_substituted_with_actual_uuid ${FS}
+ mount -o loop ${FS}/nailgun.iso ${SOURCE}
+fi
+
+OPENSTACK_VERSION=`cat ${SOURCE}/openstack_version`
+
+# ----------------------
+# UNPACKING REPOSITORIES
+# ----------------------
+
+wwwdir="/var/www/nailgun"
+repodir="${wwwdir}/${OPENSTACK_VERSION}"
+
+# Copying Centos files
+mkdir -p ${repodir}/centos/x86_64
+cp -r ${SOURCE}/images ${repodir}/centos/x86_64
+cp -r ${SOURCE}/isolinux ${repodir}/centos/x86_64
+cp -r ${SOURCE}/repodata ${repodir}/centos/x86_64
+cp -r ${SOURCE}/Packages ${repodir}/centos/x86_64
+cp ${SOURCE}/.treeinfo ${repodir}/centos/x86_64
+
+# Copying Ubuntu files
+mkdir -p ${repodir}/ubuntu/x86_64/images
+cp -r ${SOURCE}/ubuntu/dists ${repodir}/ubuntu/x86_64
+cp -r ${SOURCE}/ubuntu/pool ${repodir}/ubuntu/x86_64
+
+# We do not ship debian-installer kernel and initrd on ISO.
+# But we still need to be able to create ubuntu cobbler distro
+# which requires kernel and initrd to be available. So, we
+# just touch these files to work around cobbler's limitation.
+touch ${repodir}/ubuntu/x86_64/images/linux
+touch ${repodir}/ubuntu/x86_64/images/initrd.gz
+
+# make links for backward compatibility
+ln -s ${repodir}/centos ${wwwdir}/centos
+ln -s ${repodir}/ubuntu ${wwwdir}/ubuntu
+
+# --------------------------
+# UNPACKING PUPPET MANIFESTS
+# --------------------------
+
+# create folders
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/manifests/
+#mkdir -p /etc/puppet/${OPENSTACK_VERSION}/modules/
+#rm -rf /etc/puppet/modules/
+
+# TODO(ikalnitsky): investigate why we need this
+#cp ${SOURCE}/puppet-slave.tgz ${wwwdir}/
+
+# place modules and manifests
+#tar zxf ${SOURCE}/puppet-slave.tgz -C /etc/puppet/${OPENSTACK_VERSION}/modules
+#cp /etc/puppet/${OPENSTACK_VERSION}/modules/osnailyfacter/examples/site.pp /etc/puppet/${OPENSTACK_VERSION}/manifests/site.pp
+cp ${SOURCE}/centos-versions.yaml ${SOURCE}/ubuntu-versions.yaml /etc/puppet/${OPENSTACK_VERSION}/manifests/
+
+# make links for backward compatibility
+#pushd /etc/puppet
+#ln -s ${OPENSTACK_VERSION}/manifests/ /etc/puppet/manifests
+#ln -s ${OPENSTACK_VERSION}/modules/ /etc/puppet/modules
+#popd
+
+cp ${SOURCE}/send2syslog.py /bin/send2syslog.py
+mkdir -p /var/lib/hiera
+touch /var/lib/hiera/common.yaml /etc/puppet/hiera.yaml
+
+# Prepare local repository specification
+rm /etc/yum.repos.d/CentOS*.repo
+cat > /etc/yum.repos.d/nailgun.repo << EOF
+[nailgun]
+name=Nailgun Local Repo
+baseurl=file:/var/www/nailgun/${OPENSTACK_VERSION}/centos/x86_64
+gpgcheck=0
+EOF
+
+# Disable subscription-manager plugins
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/product-id.conf || :
+sed -i 's/^enabled.*/enabled=0/' /etc/yum/pluginconf.d/subscription-manager.conf || :
+
+# Disable GSSAPI in ssh server config
+sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config
+
+# Enable MOTD banner in sshd
+sed -i -e "s/^\s*PrintMotd no/PrintMotd yes/g" /etc/ssh/sshd_config
+
+# Add note regarding local repos creation to MOTD
+cat >> /etc/motd << EOF
+
+All environments use online repositories by default.
+Use the following commands to create local repositories
+on master node and change default repository settings:
+
+* CentOS: fuel-package-updates (see --help for options)
+* Ubuntu: fuel-createmirror (see --help for options)
+
+Please refer to the following guide for more information:
+https://docs.mirantis.com/openstack/fuel/fuel-7.0/reference-architecture.html#fuel-rep-mirror
+
+EOF
+
+# Copying bootstrap_admin_node.sh, chmod it and
+# adding /etc/init/bootstrap_admin_node.conf
+cp ${SOURCE}/bootstrap_admin_node.sh /usr/local/sbin/bootstrap_admin_node.sh
+chmod 0777 /usr/local/sbin/bootstrap_admin_node.sh
+cp ${SOURCE}/bootstrap_admin_node.conf /etc/init/bootstrap_admin_node.conf
+echo "ENABLED=1" > /etc/sysconfig/bootstrap_admin_node
+
+# Copying version.yaml file. It contains COMMIT_SHA of last commit.
+RELEASE=$(awk '/release/{gsub(/"/, "");print $2}' ${SOURCE}/version.yaml)
+mkdir -p /etc/nailgun /etc/fuel/${RELEASE} /etc/fuel/release_versions
+cp ${SOURCE}/version.yaml /etc/nailgun/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/${RELEASE}/version.yaml
+ln -s /etc/fuel/${RELEASE}/version.yaml /etc/fuel/version.yaml
+cp ${SOURCE}/version.yaml /etc/fuel/release_versions/`cat ${SOURCE}/openstack_version`.yaml
+
+# Generete Fuel UUID
+uuidgen > /etc/fuel/fuel-uuid
+
+# Run fuel menu
+[ -z "$showmenu" ] && showmenu="no"
+
+# Pause during bootstrap_admin_node to wait for external config
+[ -z "$wait_for_external_config" ] && wait_for_external_config="no"
+
+
+# Prepare bootstrap_admin_node config
+cat > /etc/fuel/bootstrap_admin_node.conf << EOF
+#Set to yes to run Fuel Setup
+#Set to no to accept default settings
+ADMIN_INTERFACE=${admin_interface}
+showmenu=${showmenu}
+wait_for_external_config=${wait_for_external_config}
+EOF
+
+# Prepare custom /etc/issue logon banner and script for changing IP in it
+cat > /etc/issue << EOF
+#########################################
+# Welcome to the Fuel server #
+#########################################
+Server is running on \m platform
+
+Fuel UI is available on:
+https://:8443
+
+Default administrator login: root
+Default administrator password: r00tme
+
+Default Fuel UI login: admin
+Default Fuel UI password: admin
+
+Please change root password on first login.
+
+EOF
+
+
+cat >> '/etc/rc.local' << EOF
+first=yes
+for ip in \$(ip -o -4 addr | grep "eth." | awk '{print \$4 }' | cut -d/ -f1); do
+if [ "\$first" = "yes" ]; then
+ ipstr="Fuel UI is available on: https://\$ip:8443"
+ first=no
+else
+ ipstr=\$(printf "%s\n%25s%s" "\$ipstr" " " "https://\$ip:8443")
+fi
+done
+tmpissue=\$(mktemp)
+while read -r line; do
+ if [[ "\$line" =~ "Fuel UI is available on" ]]; then
+ echo -e "\$ipstr" >> \$tmpissue
+ elif [[ "\$line" =~ :8443$ ]]; then
+ :
+ else
+ echo -e "\$line" >> \$tmpissue
+ fi
+done < /etc/issue
+mv "\$tmpissue" /etc/issue
+
+EOF
+
+
+# Unmounting source
+umount -f ${SOURCE}
+rm -rf ${SOURCE}
+
+umount -f ${FS} || true
+rm -rf ${FS}
+
+echo "tos orphan 7" >> /etc/ntp.conf
+
+# Do not show error message on ntpdate failure. Customers should not be confused
+# if admin node does not have access to the internet time servers.
+sed -i /etc/rc.d/init.d/ntpdate -e 's/\([ $RETVAL -eq 0 ] && success || \)failure/\1success/'
+
+# Disabling splash
+sed -i --follow-symlinks -e '/^\skernel/ s/rhgb//' /etc/grub.conf
+sed -i --follow-symlinks -e '/^\skernel/ s/quiet//' /etc/grub.conf
+
+# Disabling console clearing
+sed -i 's/getty/getty --noclear/' /etc/init/tty.conf
+
+# Disabling starting first console from start-ttys service
+sed -i --follow-symlinks -e 's/ACTIVE_CONSOLES=.*/ACTIVE_CONSOLES=\/dev\/tty\[2-6\]/' /etc/sysconfig/init
+
+# Copying default bash settings to the root directory
+cp -f /etc/skel/.bash* /root/
+
+# Blacklist i2c_piix4 module for VirtualBox so it does not create kernel errors
+[[ $(virt-what) = "virtualbox" ]] && echo "blacklist i2c_piix4" > /etc/modprobe.d/blacklist-i2c-piix4.conf
+
+%end \ No newline at end of file
diff --git a/build/f_isoroot/f_odlpluginbuild/Makefile b/build/f_isoroot/f_odlpluginbuild/Makefile
new file mode 100644
index 000000000..a63cdadf8
--- /dev/null
+++ b/build/f_isoroot/f_odlpluginbuild/Makefile
@@ -0,0 +1,73 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# mskalski@mirantis.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+TOP := $(shell pwd)
+ODL_BRANCH=7.0
+ODL_REPO="https://github.com/openstack/fuel-plugin-opendaylight.git"
+
+.PHONY: all
+all: .odlbuild
+
+.PHONY: clean
+clean:
+ @rm -f .odlbuild ../release/opnfv/opendaylight*.rpm opendaylight*.rpm
+ @rm -f $(BUILD_BASE)/gitinfo_odlplugin.txt gitinfo_odlplugin.txt
+
+.PHONY: release
+release:.odlbuild
+ @rm -f ../release/opnfv/opendaylight*.rpm
+ @mkdir -p ../release/opnfv
+ @cp opendaylight*.rpm ../release/opnfv/
+ cp gitinfo_odlplugin.txt $(BUILD_BASE)
+ cd $(BUILD_BASE) && mkdir -p ../deploy/templates/plugins && cp -rf $(TOP)/config/* ../deploy/templates/plugins
+.odlbuild:
+ rm -rf fuel-plugin-opendaylight
+ sudo apt-get -y install build-essential ruby-dev rubygems-integration python-pip git rpm createrepo dpkg-dev
+ sudo gem install fpm
+ sudo pip install fuel-plugin-builder
+ git clone -b $(ODL_BRANCH) $(ODL_REPO)
+ @$(BUILD_BASE)/check_dependencies.sh fuel-plugin-opendaylight/odl_package/ubuntu/dependencies.txt
+ INCLUDE_DEPENDENCIES=true fpb --debug --build fuel-plugin-opendaylight/
+ mv fuel-plugin-opendaylight/opendaylight*.rpm .
+ $(REPOINFO) -r . > gitinfo_odlplugin.txt
+ rm -rf fuel-plugin-opendaylight
+ touch .odlbuild
+
+#############################################################################
+# Cache operations - only used when building through ci/build.sh
+#############################################################################
+
+
+# Create a unique hash to be used for getting and putting cache, based on:
+# - The SHA1 hash of the HEAD on the plugin repo's $(ODL_BRANCH)
+# - The contents of this Makefile
+.cacheid:
+ git ls-remote --heads $(ODL_REPO) | grep $(ODL_BRANCH) > .cachedata
+ sha1sum Makefile >> .cachedata
+ cat .cachedata | $(CACHETOOL) getid > .cacheid
+
+# Clean local data related to caching - called prior to ordinary build
+.PHONY: clean-cache
+clean-cache: clean
+ rm -f .cachedata .cacheid
+
+# Try to download cache - called prior to ordinary build
+.PHONY: get-cache
+get-cache: .cacheid
+ @if $(CACHETOOL) check $(shell cat .cacheid); then \
+ $(CACHETOOL) get $(shell cat .cacheid) | tar xf -;\
+ else \
+ echo "No cache item found for $(shell cat .cacheid)" ;\
+ exit 0;\
+ fi
+
+# Store cache if not already stored - called after ordinary build
+.PHONY: put-cache
+put-cache: .cacheid
+ @tar cf - .odlbuild opendaylight*.rpm gitinfo_odlplugin.txt | $(CACHETOOL) put $(shell cat .cacheid)
diff --git a/build/f_isoroot/f_odlpluginbuild/config/opendaylight_config.yaml b/build/f_isoroot/f_odlpluginbuild/config/opendaylight_config.yaml
new file mode 100644
index 000000000..183ef9ca9
--- /dev/null
+++ b/build/f_isoroot/f_odlpluginbuild/config/opendaylight_config.yaml
@@ -0,0 +1,52 @@
+opendaylight:
+ metadata:
+ enabled: true
+ label: OpenDaylight plugin
+ plugin_id: 1
+ restrictions:
+ - cluster:net_provider != 'neutron': Only neutron is supported by OpenDaylight
+ toggleable: true
+ weight: 70
+ rest_api_port:
+ description: Port on which ODL REST API will be available.
+ label: Port number
+ regex:
+ error: Invalid port number
+ source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$
+ type: text
+ value: '8282'
+ weight: 40
+ use_vxlan:
+ description: Configure neutron to use VXLAN tunneling
+ label: Use vxlan
+ restrictions:
+ - action: disable
+ condition: networking_parameters:segmentation_type == 'vlan'
+ message: Neutron with GRE segmentation required
+ type: checkbox
+ value: true
+ weight: 20
+ vni_range_end:
+ description: VXLAN VNI IDs range end
+ label: VNI range end
+ regex:
+ error: Invalid ID number
+ source: ^\d+$
+ restrictions:
+ - action: hide
+ condition: networking_parameters:segmentation_type == 'vlan'
+ type: text
+ value: '10000'
+ weight: 31
+ vni_range_start:
+ description: VXLAN VNI IDs range start
+ label: VNI range start
+ regex:
+ error: Invalid ID number
+ source: ^\d+$
+ restrictions:
+ - action: hide
+ condition: networking_parameters:segmentation_type == 'vlan'
+ type: text
+ value: '10'
+ weight: 30
diff --git a/build/f_isoroot/f_repobuild/Makefile b/build/f_isoroot/f_repobuild/Makefile
new file mode 100644
index 000000000..d7db2dd90
--- /dev/null
+++ b/build/f_isoroot/f_repobuild/Makefile
@@ -0,0 +1,86 @@
+##############################################################################
+# Copyright (c) 2015 Ericsson AB and others.
+# stefan.k.berg@ericsson.com
+# jonas.bjurel@ericsson.com
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+##############################################################################
+
+SHELL := /bin/bash
+TOP := $(shell pwd)
+RSYNC_HOST := $(shell ./select_ubuntu_repo.sh)
+
+
+.PHONY: all
+all: nailgun
+
+nailgun:
+# If RSYNC_CONNECT_PROG is set we need to do some magic to copy the
+# keys. Make sure to have the username set in the SSH_CONNECT_PROG
+# as well!
+ @if [ -n "${RSYNC_CONNECT_PROG}" -a ! -d /root/.ssh ]; then \
+ sudo mkdir -p /root/.ssh; \
+ test -d ${HOME}/.ssh && sudo find ${HOME}/.ssh -maxdepth 1 -type f -exec cp {} /root/.ssh \; ; \
+ sudo bash -c "echo StrictHostKeyChecking=no > /root/.ssh/config"; \
+ sudo chmod 700 /root/.ssh; \
+ fi
+ sudo apt-get install -y rsync python python-yaml dpkg-dev openssl
+ rm -rf tmpiso tmpdir
+ mkdir tmpiso
+ fuseiso ${ISOCACHE} tmpiso
+ cp tmpiso/ubuntu/pool/main/f/fuel-createmirror/fuel-createmirror_*.deb .
+ fusermount -u tmpiso
+ rm -rf tmpiso
+ sudo dpkg -i fuel-createmirror_*.deb
+ sudo sed -i 's/DOCKER_MODE=true/DOCKER_MODE=false/' /etc/fuel-createmirror/common.cfg
+ sudo sed -i 's/DEBUG="no"/DEBUG="yes"/' /etc/fuel-createmirror/ubuntu.cfg
+ sudo sed -i "s/MIRROR_UBUNTU_HOST=\".*\"/MIRROR_UBUNTU_HOST=\"$(RSYNC_HOST)\"/" /etc/fuel-createmirror/common.cfg
+ rm -Rf nailgun
+ sudo mkdir -p /var/www
+ sudo su - -c /opt/fuel-createmirror-*/fuel-createmirror
+ sudo chmod -R 755 /var/www/nailgun
+ cp -Rp /var/www/nailgun .
+
+.PHONY: clean
+clean:
+ @rm -rf ../release/opnfv/nailgun nailgun fuel-createmirror_6.1*.deb
+
+.PHONY: release
+release:nailgun
+ @rm -Rf ../release/opnfv/nailgun
+ @mkdir -p ../release/opnfv
+ @cp -Rp nailgun ../release/opnfv/nailgun
+
+#############################################################################
+# Cache operations - only used when building through ci/build.sh
+#############################################################################
+
+# Create a unique hash to be used for getting and putting cache, based on:
+# - Year and week (causing the cache to be rebuilt weekly)
+# - The contents of this Makefile
+.cacheid:
+ date +"Repocache %G%V" > .cachedata
+ sha1sum Makefile >> .cachedata
+ cat .cachedata | $(CACHETOOL) getid > .cacheid
+
+# Clean local data related to caching - called prior to ordinary build
+.PHONY: clean-cache
+clean-cache: clean
+ rm -f .cachedata .cacheid
+
+# Try to download cache - called prior to ordinary build
+.PHONY: get-cache
+get-cache: .cacheid
+ @if $(CACHETOOL) check $(shell cat .cacheid); then \
+ $(CACHETOOL) get $(shell cat .cacheid) | tar xf -;\
+ else \
+ echo "No cache item found for $(shell cat .cacheid)" ;\
+ exit 0;\
+ fi
+
+# Store cache if not already stored - called after ordinary build
+.PHONY: put-cache
+put-cache: .cacheid
+ @tar cf - nailgun | $(CACHETOOL) put $(shell cat .cacheid)
diff --git a/build/f_isoroot/f_repobuild/select_ubuntu_repo.sh b/build/f_isoroot/f_repobuild/select_ubuntu_repo.sh
new file mode 100755
index 000000000..cb05fe136
--- /dev/null
+++ b/build/f_isoroot/f_repobuild/select_ubuntu_repo.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+
+RSYNC="rsync -4 --contimeout 5 --no-motd --list-only"
+
+# try to choose close ubuntu mirror which support rsync protocol
+# https://bugs.launchpad.net/fuel/+bug/1459252
+
+# A minor modificiation of Michal Skalski's original Makefile version
+# to only consider repos where no repo updates are in progress (as
+# that may have us hanging quite a while otherwise). If no suitable
+# local mirror can be found after four attempts, the default archive
+# is returned instead.
+
+cnt=0
+while [ $cnt -lt 4 ]
+do
+ for url in $(curl -s http://mirrors.ubuntu.com/mirrors.txt)
+ do
+ host=$(echo $url | cut -d'/' -f3)
+ if $RSYNC "${host}::ubuntu/." &> /dev/null
+ then
+ if ! $RSYNC "${host}::ubuntu/Archive-Update-in-Progress*" &> /dev/null
+ then
+ echo "$host"
+ exit 0
+ fi
+ fi
+ done
+ cnt=$[cnt + 1]
+ sleep 15
+done
+echo "archive.ubuntu.com"
+