Moving tag arno.2015.2.0 from genesis to fuel/stable/arnoarno.2015.2.0stable/arno

Change-Id: I01b5f9f9125756d80d7ca666bb6d994f2b13d2a0
Signed-off-by: Jonas Bjurel <jonas.bjurel@ericsson.com>

1 files changed, 677 insertions, 0 deletions

diff --git a/compass/deploy/ansible/roles/glance/templates/glance-api.conf b/compass/deploy/ansible/roles/glance/templates/glance-api.conf
new file mode 100644
index 000000000..763539ef2
--- /dev/null
+++ b/compass/deploy/ansible/roles/glance/templates/glance-api.conf
@@ -0,0 +1,677 @@
+[DEFAULT]
+# Show more verbose log output (sets INFO log level output)
+#verbose = False
+
+# Show debugging output in logs (sets DEBUG log level output)
+#debug = False
+
+# Which backend scheme should Glance use by default is not specified
+# in a request to add a new image to Glance? Known schemes are determined
+# by the known_stores option below.
+# Default: 'file'
+# "default_store" option has been moved to [glance_store] section in 
+# Juno release
+
+# List of which store classes and store class locations are
+# currently known to glance at startup.
+# Existing but disabled stores:
+#      glance.store.rbd.Store,
+#      glance.store.s3.Store,
+#      glance.store.swift.Store,
+#      glance.store.sheepdog.Store,
+#      glance.store.cinder.Store,
+#      glance.store.gridfs.Store,
+#      glance.store.vmware_datastore.Store,
+#known_stores = glance.store.filesystem.Store,
+#               glance.store.http.Store
+
+
+# Maximum image size (in bytes) that may be uploaded through the
+# Glance API server. Defaults to 1 TB.
+# WARNING: this value should only be increased after careful consideration
+# and must be set to a value under 8 EB (9223372036854775808).
+#image_size_cap = 1099511627776
+
+# Address to bind the API server
+bind_host = {{ image_host }}
+
+# Port the bind the API server to
+bind_port = 9292
+
+# Log to this file. Make sure you do not set the same log file for both the API
+# and registry servers!
+#
+# If `log_file` is omitted and `use_syslog` is false, then log messages are
+# sent to stdout as a fallback.
+log_file = /var/log/glance/api.log
+
+# Backlog requests when creating socket
+backlog = 4096
+
+# TCP_KEEPIDLE value in seconds when creating socket.
+# Not supported on OS X.
+#tcp_keepidle = 600
+
+# API to use for accessing data. Default value points to sqlalchemy
+# package, it is also possible to use: glance.db.registry.api
+# data_api = glance.db.sqlalchemy.api
+
+# Number of Glance API worker processes to start.
+# On machines with more than one CPU increasing this value
+# may improve performance (especially if using SSL with
+# compression turned on). It is typically recommended to set
+# this value to the number of CPUs present on your machine.
+workers = 1
+
+# Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large tokens
+# (typically those generated by the Keystone v3 API with big service
+# catalogs)
+# max_header_line = 16384
+
+# Role used to identify an authenticated user as administrator
+#admin_role = admin
+
+# Allow unauthenticated users to access the API with read-only
+# privileges. This only applies when using ContextMiddleware.
+#allow_anonymous_access = False
+
+# Allow access to version 1 of glance api
+#enable_v1_api = True
+
+# Allow access to version 2 of glance api
+#enable_v2_api = True
+
+# Return the URL that references where the data is stored on
+# the backend storage system.  For example, if using the
+# file system store a URL of 'file:///path/to/image' will
+# be returned to the user in the 'direct_url' meta-data field.
+# The default value is false.
+#show_image_direct_url = False
+
+# Send headers containing user and tenant information when making requests to
+# the v1 glance registry. This allows the registry to function as if a user is
+# authenticated without the need to authenticate a user itself using the
+# auth_token middleware.
+# The default value is false.
+#send_identity_headers = False
+
+# Supported values for the 'container_format' image attribute
+#container_formats=ami,ari,aki,bare,ovf,ova
+
+# Supported values for the 'disk_format' image attribute
+#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso
+
+# Directory to use for lock files. Default to a temp directory
+# (string value). This setting needs to be the same for both
+# glance-scrubber and glance-api.
+#lock_path=<None>
+
+# Property Protections config file
+# This file contains the rules for property protections and the roles/policies
+# associated with it.
+# If this config value is not specified, by default, property protections
+# won't be enforced.
+# If a value is specified and the file is not found, then the glance-api
+# service will not start.
+#property_protection_file =
+
+# Specify whether 'roles' or 'policies' are used in the
+# property_protection_file.
+# The default value for property_protection_rule_format is 'roles'.
+#property_protection_rule_format = roles
+
+# Specifies how long (in hours) a task is supposed to live in the tasks DB
+# after succeeding or failing before getting soft-deleted.
+# The default value for task_time_to_live is 48 hours.
+# task_time_to_live = 48
+
+# This value sets what strategy will be used to determine the image location
+# order. Currently two strategies are packaged with Glance 'location_order'
+# and 'store_type'.
+#location_strategy = location_order
+
+# ================= Syslog Options ============================
+
+# Send logs to syslog (/dev/log) instead of to file specified
+# by `log_file`
+#use_syslog = False
+
+# Facility to use. If unset defaults to LOG_USER.
+#syslog_log_facility = LOG_LOCAL0
+
+# ================= SSL Options ===============================
+
+# Certificate file to use when starting API server securely
+#cert_file = /path/to/certfile
+
+# Private key file to use when starting API server securely
+#key_file = /path/to/keyfile
+
+# CA certificate file to use to verify connecting clients
+#ca_file = /path/to/cafile
+
+# ================= Security Options ==========================
+
+# AES key for encrypting store 'location' metadata, including
+# -- if used -- Swift or S3 credentials
+# Should be set to a random string of length 16, 24 or 32 bytes
+#metadata_encryption_key = <16, 24 or 32 char registry metadata key>
+
+# ============ Registry Options ===============================
+
+# Address to find the registry server
+registry_host = {{ internal_ip }}
+
+# Port the registry server is listening on
+registry_port = 9191
+
+# What protocol to use when connecting to the registry server?
+# Set to https for secure HTTP communication
+registry_client_protocol = http
+
+# The path to the key file to use in SSL connections to the
+# registry server, if any. Alternately, you may set the
+# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file
+#registry_client_key_file = /path/to/key/file
+
+# The path to the cert file to use in SSL connections to the
+# registry server, if any. Alternately, you may set the
+# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file
+#registry_client_cert_file = /path/to/cert/file
+
+# The path to the certifying authority cert file to use in SSL connections
+# to the registry server, if any. Alternately, you may set the
+# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file
+#registry_client_ca_file = /path/to/ca/file
+
+# When using SSL in connections to the registry server, do not require
+# validation via a certifying authority. This is the registry's equivalent of
+# specifying --insecure on the command line using glanceclient for the API
+# Default: False
+#registry_client_insecure = False
+
+# The period of time, in seconds, that the API server will wait for a registry
+# request to complete. A value of '0' implies no timeout.
+# Default: 600
+#registry_client_timeout = 600
+
+# Whether to automatically create the database tables.
+# Default: False
+#db_auto_create = False
+
+# Enable DEBUG log messages from sqlalchemy which prints every database
+# query and response.
+# Default: False
+#sqlalchemy_debug = True
+
+# Pass the user's token through for API requests to the registry.
+# Default: True
+#use_user_token = True
+
+# If 'use_user_token' is not in effect then admin credentials
+# can be specified. Requests to the registry on behalf of
+# the API will use these credentials.
+# Admin user name
+#admin_user = None
+# Admin password
+#admin_password = None
+# Admin tenant name
+#admin_tenant_name = None
+# Keystone endpoint
+#auth_url = None
+# Keystone region
+#auth_region = None
+# Auth strategy
+#auth_strategy = keystone
+
+# ============ Notification System Options =====================
+
+# Notifications can be sent when images are create, updated or deleted.
+# There are three methods of sending notifications, logging (via the
+# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid
+# message queue), or noop (no notifications sent, the default)
+# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver`
+# notifier_strategy = default
+
+# Driver or drivers to handle sending notifications
+# notification_driver = noop
+
+# Default publisher_id for outgoing notifications.
+# default_publisher_id = image.localhost
+
+# Configuration options if sending notifications via rabbitmq (these are
+# the defaults)
+rabbit_host = localhost
+rabbit_port = 5672
+rabbit_use_ssl = false
+rabbit_userid = {{ RABBIT_USER }}
+rabbit_password = {{ RABBIT_PASS }}
+rabbit_virtual_host = /
+rabbit_notification_exchange = glance
+rabbit_notification_topic = notifications
+rabbit_durable_queues = False
+
+# Configuration options if sending notifications via Qpid (these are
+# the defaults)
+qpid_notification_exchange = glance
+qpid_notification_topic = notifications
+qpid_hostname = localhost
+qpid_port = 5672
+qpid_username =
+qpid_password =
+qpid_sasl_mechanisms =
+qpid_reconnect_timeout = 0
+qpid_reconnect_limit = 0
+qpid_reconnect_interval_min = 0
+qpid_reconnect_interval_max = 0
+qpid_reconnect_interval = 0
+qpid_heartbeat = 5
+# Set to 'ssl' to enable SSL
+qpid_protocol = tcp
+qpid_tcp_nodelay = True
+
+# ============ Filesystem Store Options ========================
+
+# Directory that the Filesystem backend store
+# writes image data to
+# this option has been moved to [glance_store] for Juno release
+# filesystem_store_datadir = /var/lib/glance/images/
+
+# A list of directories where image data can be stored.
+# This option may be specified multiple times for specifying multiple store
+# directories. Either one of filesystem_store_datadirs or
+# filesystem_store_datadir option is required. A priority number may be given
+# after each directory entry, separated by a ":".
+# When adding an image, the highest priority directory will be selected, unless
+# there is not enough space available in cases where the image size is already
+# known. If no priority is given, it is assumed to be zero and the directory
+# will be considered for selection last. If multiple directories have the same
+# priority, then the one with the most free space available is selected.
+# If same store is specified multiple times then BadStoreConfiguration
+# exception will be raised.
+#filesystem_store_datadirs = /var/lib/glance/images/:1
+
+# A path to a JSON file that contains metadata describing the storage
+# system.  When show_multiple_locations is True the information in this
+# file will be returned with any location that is contained in this
+# store.
+#filesystem_store_metadata_file = None
+
+# ============ Swift Store Options =============================
+
+# Version of the authentication service to use
+# Valid versions are '2' for keystone and '1' for swauth and rackspace
+swift_store_auth_version = 2
+
+# Address where the Swift authentication service lives
+# Valid schemes are 'http://' and 'https://'
+# If no scheme specified,  default to 'https://'
+# For swauth, use something like '127.0.0.1:8080/v1.0/'
+swift_store_auth_address = 127.0.0.1:5000/v2.0/
+
+# User to authenticate against the Swift authentication service
+# If you use Swift authentication service, set it to 'account':'user'
+# where 'account' is a Swift storage account and 'user'
+# is a user in that account
+swift_store_user = jdoe:jdoe
+
+# Auth key for the user authenticating against the
+# Swift authentication service
+swift_store_key = a86850deb2742ec3cb41518e26aa2d89
+
+# Container within the account that the account should use
+# for storing images in Swift
+swift_store_container = glance
+
+# Do we create the container if it does not exist?
+swift_store_create_container_on_put = False
+
+# What size, in MB, should Glance start chunking image files
+# and do a large object manifest in Swift? By default, this is
+# the maximum object size in Swift, which is 5GB
+swift_store_large_object_size = 5120
+
+# When doing a large object manifest, what size, in MB, should
+# Glance write chunks to Swift? This amount of data is written
+# to a temporary disk buffer during the process of chunking
+# the image file, and the default is 200MB
+swift_store_large_object_chunk_size = 200
+
+# Whether to use ServiceNET to communicate with the Swift storage servers.
+# (If you aren't RACKSPACE, leave this False!)
+#
+# To use ServiceNET for authentication, prefix hostname of
+# `swift_store_auth_address` with 'snet-'.
+# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
+swift_enable_snet = False
+
+# If set to True enables multi-tenant storage mode which causes Glance images
+# to be stored in tenant specific Swift accounts.
+#swift_store_multi_tenant = False
+
+# A list of swift ACL strings that will be applied as both read and
+# write ACLs to the containers created by Glance in multi-tenant
+# mode. This grants the specified tenants/users read and write access
+# to all newly created image objects. The standard swift ACL string
+# formats are allowed, including:
+# <tenant_id>:<username>
+# <tenant_name>:<username>
+# *:<username>
+# Multiple ACLs can be combined using a comma separated list, for
+# example: swift_store_admin_tenants = service:glance,*:admin
+#swift_store_admin_tenants =
+
+# The region of the swift endpoint to be used for single tenant. This setting
+# is only necessary if the tenant has multiple swift endpoints.
+#swift_store_region =
+
+# If set to False, disables SSL layer compression of https swift requests.
+# Setting to 'False' may improve performance for images which are already
+# in a compressed format, eg qcow2. If set to True, enables SSL layer
+# compression (provided it is supported by the target swift proxy).
+#swift_store_ssl_compression = True
+
+# The number of times a Swift download will be retried before the
+# request fails
+#swift_store_retry_get_count = 0
+
+# ============ S3 Store Options =============================
+
+# Address where the S3 authentication service lives
+# Valid schemes are 'http://' and 'https://'
+# If no scheme specified,  default to 'http://'
+s3_store_host = 127.0.0.1:8080/v1.0/
+
+# User to authenticate against the S3 authentication service
+s3_store_access_key = <20-char AWS access key>
+
+# Auth key for the user authenticating against the
+# S3 authentication service
+s3_store_secret_key = <40-char AWS secret key>
+
+# Container within the account that the account should use
+# for storing images in S3. Note that S3 has a flat namespace,
+# so you need a unique bucket name for your glance images. An
+# easy way to do this is append your AWS access key to "glance".
+# S3 buckets in AWS *must* be lowercased, so remember to lowercase
+# your AWS access key if you use it in your bucket name below!
+s3_store_bucket = <lowercased 20-char aws access key>glance
+
+# Do we create the bucket if it does not exist?
+s3_store_create_bucket_on_put = False
+
+# When sending images to S3, the data will first be written to a
+# temporary buffer on disk. By default the platform's temporary directory
+# will be used. If required, an alternative directory can be specified here.
+#s3_store_object_buffer_dir = /path/to/dir
+
+# When forming a bucket url, boto will either set the bucket name as the
+# subdomain or as the first token of the path. Amazon's S3 service will
+# accept it as the subdomain, but Swift's S3 middleware requires it be
+# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'.
+#s3_store_bucket_url_format = subdomain
+
+# ============ RBD Store Options =============================
+
+# Ceph configuration file path
+# If using cephx authentication, this file should
+# include a reference to the right keyring
+# in a client.<USER> section
+#rbd_store_ceph_conf = /etc/ceph/ceph.conf
+
+# RADOS user to authenticate as (only applicable if using cephx)
+# If <None>, a default will be chosen based on the client. section
+# in rbd_store_ceph_conf
+#rbd_store_user = <None>
+
+# RADOS pool in which images are stored
+#rbd_store_pool = images
+
+# RADOS images will be chunked into objects of this size (in megabytes).
+# For best performance, this should be a power of two
+#rbd_store_chunk_size = 8
+
+# ============ Sheepdog Store Options =============================
+
+sheepdog_store_address = localhost
+
+sheepdog_store_port = 7000
+
+# Images will be chunked into objects of this size (in megabytes).
+# For best performance, this should be a power of two
+sheepdog_store_chunk_size = 64
+
+# ============ Cinder Store Options ===============================
+
+# Info to match when looking for cinder in the service catalog
+# Format is : separated values of the form:
+# <service_type>:<service_name>:<endpoint_type> (string value)
+#cinder_catalog_info = volume:cinder:publicURL
+
+# Override service catalog lookup with template for cinder endpoint
+# e.g. http://localhost:8776/v1/%(project_id)s (string value)
+#cinder_endpoint_template = <None>
+
+# Region name of this node (string value)
+#os_region_name = <None>
+
+# Location of ca certicates file to use for cinder client requests
+# (string value)
+#cinder_ca_certificates_file = <None>
+
+# Number of cinderclient retries on failed http calls (integer value)
+#cinder_http_retries = 3
+
+# Allow to perform insecure SSL requests to cinder (boolean value)
+#cinder_api_insecure = False
+
+# ============ VMware Datastore Store Options =====================
+
+# ESX/ESXi or vCenter Server target system.
+# The server value can be an IP address or a DNS name
+# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com
+#vmware_server_host = <None>
+
+# Server username (string value)
+#vmware_server_username = <None>
+
+# Server password (string value)
+#vmware_server_password = <None>
+
+# Inventory path to a datacenter (string value)
+# Value optional when vmware_server_ip is an ESX/ESXi host: if specified
+# should be `ha-datacenter`.
+#vmware_datacenter_path = <None>
+
+# Datastore associated with the datacenter (string value)
+#vmware_datastore_name = <None>
+
+# The number of times we retry on failures
+# e.g., socket error, etc (integer value)
+#vmware_api_retry_count = 10
+
+# The interval used for polling remote tasks
+# invoked on VMware ESX/VC server in seconds (integer value)
+#vmware_task_poll_interval = 5
+
+# Absolute path of the folder containing the images in the datastore
+# (string value)
+#vmware_store_image_dir = /openstack_glance
+
+# Allow to perform insecure SSL requests to the target system (boolean value)
+#vmware_api_insecure = False
+
+# ============ Delayed Delete Options =============================
+
+# Turn on/off delayed delete
+delayed_delete = False
+
+# Delayed delete time in seconds
+scrub_time = 43200
+
+# Directory that the scrubber will use to remind itself of what to delete
+# Make sure this is also set in glance-scrubber.conf
+scrubber_datadir = /var/lib/glance/scrubber
+
+# =============== Quota Options ==================================
+
+# The maximum number of image members allowed per image
+#image_member_quota = 128
+
+# The maximum number of image properties allowed per image
+#image_property_quota = 128
+
+# The maximum number of tags allowed per image
+#image_tag_quota = 128
+
+# The maximum number of locations allowed per image
+#image_location_quota = 10
+
+# Set a system wide quota for every user.  This value is the total number
+# of bytes that a user can use across all storage systems.  A value of
+# 0 means unlimited.
+#user_storage_quota = 0
+
+# =============== Image Cache Options =============================
+
+# Base directory that the Image Cache uses
+image_cache_dir = /var/lib/glance/image-cache/
+
+# =============== Manager Options =================================
+
+# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE.
+# Whether or not to enforce that all DB tables have charset utf8.
+# If your database tables do not have charset utf8 you will
+# need to convert before this option is removed. This option is
+# only relevant if your database engine is MySQL.
+#db_enforce_mysql_charset = True
+
+# =============== Glance Store ====================================
+[glance_store]
+# Moved from [DEFAULT], for Juno release
+default_store = file
+filesystem_store_datadir = /var/lib/glance/images/
+
+# =============== Database Options =================================
+
+[database]
+# The file name to use with SQLite (string value)
+sqlite_db = /var/lib/glance/glance.sqlite
+
+# If True, SQLite uses synchronous mode (boolean value)
+#sqlite_synchronous = True
+
+# The backend to use for db (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+backend = sqlalchemy
+
+# The SQLAlchemy connection string used to connect to the
+# database (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance
+
+# The SQL mode to be used for MySQL sessions. This option,
+# including the default, overrides any server-set SQL mode. To
+# use whatever SQL mode is set by the server configuration,
+# set this to no value. Example: mysql_sql_mode= (string
+# value)
+#mysql_sql_mode = TRADITIONAL
+
+# Timeout before idle sql connections are reaped (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#idle_timeout = 3600
+
+# Minimum number of SQL connections to keep open in a pool
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = <None>
+
+# Maximum db connection retries during startup. (setting -1
+# implies an infinite retry count) (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+
+# Interval between retries of opening a sql connection
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with sqlalchemy
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = <None>
+
+# Verbosity of SQL debugging information. 0=None,
+# 100=Everything (integer value)
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add python stack traces to SQL as comment strings (boolean
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = False
+
+# If set, use this value for pool_timeout with sqlalchemy
+# (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on
+# connection lost (boolean value)
+#use_db_reconnect = False
+
+# seconds between db connection retries (integer value)
+#db_retry_interval = 1
+
+# Whether to increase interval between db connection retries,
+# up to db_max_retry_interval (boolean value)
+#db_inc_retry_interval = True
+
+# max seconds between db connection retries, if
+# db_inc_retry_interval is enabled (integer value)
+#db_max_retry_interval = 10
+
+# maximum db connection retries before error is raised.
+# (setting -1 implies an infinite retry count) (integer value)
+#db_max_retries = 20
+
+[keystone_authtoken]
+auth_uri = http://{{ HA_VIP }}:5000/v2.0
+identity_uri = http://{{ HA_VIP }}:35357
+admin_tenant_name = service
+admin_user = glance
+admin_password = {{ GLANCE_PASS }}
+
+[paste_deploy]
+# Name of the paste configuration file that defines the available pipelines
+#config_file = glance-api-paste.ini
+
+# Partial name of a pipeline in your paste configuration file with the
+# service name removed. For example, if your paste section name is
+# [pipeline:glance-api-keystone], you would configure the flavor below
+# as 'keystone'.
+flavor= keystone
+
+[store_type_location_strategy]
+# The scheme list to use to get store preference order. The scheme must be
+# registered by one of the stores defined by the 'known_stores' config option.
+# This option will be applied when you using 'store_type' option as image
+# location strategy defined by the 'location_strategy' config option.
+#store_type_preference =