[cleanup] Remove obsolete prototypes

Tacker POC is replaced by the full os-odl-sfc-noha scenario.

Change-Id: Ic0648d55e08ccf84244ac286b65fca2656d04a2d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit b7383cda9b6ffdaf6dd8bb07dc74e1c8a7046dbd)

2 files changed, 0 insertions, 447 deletions

diff --git a/prototypes/sfc_tacker/README.rst b/prototypes/sfc_tacker/README.rst
deleted file mode 100644
index e219abd34..000000000
--- a/prototypes/sfc_tacker/README.rst
+++ /dev/null
@@ -1,62 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. SPDX-License-Identifier: CC-BY-4.0
-.. (c) 2016 Telefonaktiebolaget L. M. ERICSSON
-
-README SFC + Tacker
-===================
-
-The Enclosed shell script builds, deploys, orchestrates Tacker,
-an Open NFV Orchestrator with in-built general purpose VNF Manager
-to deploy and operate Virtual Network Functions (VNFs).
-
-The provided deployment tool is experimental, not fault
-tolerant but as idempotent as possible. To use the provided shell
-script for provision/deployment, transfer the script to the Openstack
-primary controller node,  where Your deployed OpenDaylight SDN
-controller runs. The deployment tool (poc.tacker-up.sh), expects that
-Your primary controller reaches all your OPNFV/Fuel cluster nodes and
-has internet connection either directly or via an http proxy, note
-that a working and consistent DNS name resolution is a must.
-
-Theory of operation: the deployment tool downloads the source
-python packages from GitHub and a json rpc library developed by Josh
-Marshall. Besides these sources, downloads software for python/debian
-software release. When building succeeds the script deploys the software
-components to the OPNFV Cluster nodes. Finally orchestrates the deployed
-tacker binaries as an infrastucture/service. The Tacker has two
-components:
-
-#. Tacker server
-
-   - what interacts with Openstack and OpenDayLight.
-
-#. Tacker client
-
-   - a command line software talks with the server,
-     available on all cluster nodes and the access point
-     to the Tacker service. Note that the tacker
-     distribution provides a a plugin to the Horizon
-     OpenStack Gui, but thus Horizon plugin is out of the
-     scope of this Proof of Concept setup/deployment.
-
-As mentioned, this compilation contains an OpenDayLight SDN controller
-with Service Function Chaining and Group based Policy features enabled.
-
-To acces for your cluster information ssh to the fuel master (10.20.0.2)
-and issue command: fuel node.
-Here is an output of an example deployment:
-
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-| **id** | **status** | **name**         | **cluster** | **ip**    | **mac**           | **roles**                        | **pending_roles** | **online** | **group_id** |
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-|   1    |   ready    | Untitled (cc:51) | 1           | 10.20.0.6 | 52:54:00:1e:cc:51 | compute                          |                   | True       | 1            |
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-|   2    |   ready    | Untitled (e6:3e) | 1           | 10.20.0.4 | 52:54:00:0c:e6:3e | compute                          |                   | True       | 1            |
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-|   3    |   ready    | Untitled (a2:4c) | 1           | 10.20.0.5 | 52:54:00:d3:a2:4c | compute                          |                   | True       | 1            |
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-|   4    |   ready    | Untitled (c7:d8) | 1           | 10.20.0.3 | 52:54:00:00:c7:d8 | cinder, controller, opendaylight |                   | True       | 1            |
-+--------+------------+------------------+-------------+-----------+-------------------+----------------------------------+-------------------+------------+--------------+
-
-As You can see in this case the poc.tacker-up.sh script should be
-transferred and run on node having IP address 10.20.0.3
diff --git a/prototypes/sfc_tacker/poc.tacker-up.sh b/prototypes/sfc_tacker/poc.tacker-up.sh
deleted file mode 100755
index caad3f86a..000000000
--- a/prototypes/sfc_tacker/poc.tacker-up.sh
+++ /dev/null
@@ -1,385 +0,0 @@
-#!/bin/bash
-
-#
-# POC Script to build/install/deploy/orchestrate Tacker on an OPNFV Brhamaputra Fuel cluster
-#         Script assuming it runs on the openstack primary controller (where is opendaylight
-#         present) and there is a fuel master on 10.20.0.2 and can be reached with default
-#         credentials.
-#
-# author: Ferenc Cserepkei <ferenc.cserepkei@ericsson.com>
-#
-#         (c) 2016 Telefonaktiebolaget L. M. ERICSSON
-#
-#         All rights reserved. This program and the accompanying materials are made available
-#         under the terms of the Apache License, Version 2.0 which accompanies this distribution,
-#         and is available at http://www.apache.org/licenses/LICENSE-2.0
-#
-
-
-SSH_OPTIONS=(-o StrictHostKeyChecking=no -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null -o LogLevel=error)
-
-MYDIR=$(dirname $(readlink -f "$0"))
-MYREPO="tacker-server"
-CLIREPO="tacker-client"
-DEPREPO="jsonrpclib"
-
-CLIENT=$(echo python-python-tackerclient_*_all.deb)
-JSONRPC=$(echo python-jsonrpclib_*_all.deb)
-SERVER=$(echo python-tacker_*_all.deb)
-
-#fuel admin user name
-fadm="fadm"
-
-# Function checks whether crudini is available, if not - installs
-function chkCrudini () {
-    if [[ ! -f '/usr/bin/crudini' ]]; then
-        wget -N http://mirrors.kernel.org/ubuntu/pool/universe/p/python-iniparse/python-iniparse_0.4-2.1build1_all.deb
-        wget -N http://archive.ubuntu.com/ubuntu/pool/universe/c/crudini/crudini_0.3-1_amd64.deb
-        dpkg -i python-iniparse_0.4-2.1build1_all.deb crudini_0.3-1_amd64.deb
-    fi
-}
-
-# Function checks whether a python egg is available, if not, installs
-function chkPPkg () {
-    PKG="$1"
-    IPPACK=$(python - <<'____EOF'
-import pip
-from os.path import join
-for package in pip.get_installed_distributions():
-    print(package.location)
-    print(join(package.location, *package._get_metadata("top_level.txt")))
-____EOF
-)
-    echo "$IPPACK" | grep -q "$PKG"
-    if [ $? -ne 0 ];then
-        pip install "$PKG"
-    fi
-}
-
-# Function setting up the build/deploy environment
-function envSetup () {
-    apt-key adv --keyserver keyserver.ubuntu.com --recv-keys BCE5CC461FA22B08
-    apt-get update
-    apt-get install -y git python-pip python-all debhelper
-    chkPPkg stdeb
-    chkCrudini
-}
-
-# Function installs jsonrpclib from github
-function deployJsonrpclib () {
-    if [[ -e "${MYDIR}/${JSONRPC}" ]]; then
-        echo "$JSONRPC exists."
-        return 1
-    fi
-    cd $MYDIR
-    rm -rf $DEPREPO
-    git clone https://github.com/joshmarshall/jsonrpclib.git $DEPREPO
-    cd $DEPREPO
-    dpkg --purge python-jsonrpclib
-    python setup.py --command-packages=stdeb.command bdist_deb
-    cd "deb_dist"
-    JSONRPC=$(echo python-jsonrpclib_*_all.deb)
-    cp $JSONRPC $MYDIR
-    dpkg -i $JSONRPC
-}
-
-# Function builds Tacker server from github
-function buildTackerServer () {
-    if [[ -e "${MYDIR}/${SERVER}" ]]; then
-        echo "$SERVER exists."
-        return 1
-    fi
-    cd $MYDIR
-    rm -rf $MYREPO
-    git clone  -b 'SFC_colorado' https://github.com/trozet/tacker.git $MYREPO
-    cd $MYREPO
-    patch -p  1 <<EOFSCP
-diff -ruN a/setup.cfg b/setup.cfg
---- a/setup.cfg	2016-02-08 10:54:37.416525934 +0100
-+++ b/setup.cfg	2016-02-08 10:55:29.293428896 +0100
-@@ -22,14 +22,14 @@
- packages =
-     tacker
- data_files =
--    etc/tacker =
-+    /etc/tacker =
-         etc/tacker/api-paste.ini
-         etc/tacker/policy.json
-         etc/tacker/tacker.conf
-         etc/tacker/rootwrap.conf
--    etc/rootwrap.d =
-+    /etc/rootwrap.d =
-         etc/tacker/rootwrap.d/servicevm.filters
--    etc/init.d = etc/init.d/tacker-server
-+    /etc/init.d = etc/init.d/tacker-server
-
- [global]
- setup-hooks =
-EOFSCP
-    dpkg --purge python-tacker
-    python setup.py --command-packages=stdeb.command bdist_deb
-}
-
-# Function corrects and installs the Tacker-server debian package
-function blessPackage () {
-    pushd "${MYDIR}/${MYREPO}/deb_dist"
-    SERVER=$(echo python-tacker_*_all.deb)
-    popd
-    DEBFILE="${MYDIR}/${MYREPO}/deb_dist/${SERVER}"
-    TMPDIR=$(mktemp -d /tmp/deb.XXXXXX) || exit 1
-    OUTPUT=$(basename "$DEBFILE")
-    if [[ -e "${MYDIR}/${OUTPUT}" ]]; then
-	echo "$OUTPUT exists."
-	rm -r "$TMPDIR"
-	return 1
-    fi
-    dpkg-deb -x "$DEBFILE" "$TMPDIR"
-    dpkg-deb --control "$DEBFILE" "${TMPDIR}/DEBIAN"
-    cd "$TMPDIR"
-    patch -p 1 <<EOFDC
-diff -ruN DEBIAN/control DEBIAN/control
---- a/DEBIAN/control      2016-08-19 11:53:10.000000000 +0000
-+++ b/DEBIAN/control      2016-08-19 12:01:49.629096317 +0000
-@@ -4,7 +4,7 @@
- Architecture: all
- Maintainer: OpenStack <openstack-dev@lists.openstack.org>
- Installed-Size: 1566
--Depends: python (>= 2.7), python (<< 2.8), python:any (>= 2.7.1-0ubuntu2), python-pbr, python-paste, python-pastedeploy, python-routes, python-anyjson, python-babel, python-eventlet, python-greenlet, python-httplib2, python-requests, python-iso8601, python-jsonrpclib, python-jinja2, python-kombu, python-netaddr, python-sqlalchemy (>= 1.0~), python-sqlalchemy (<< 1.1), python-webob, python-heatclient, python-keystoneclient, alembic, python-six, python-stevedore, python-oslo.config, python-oslo.messaging-, python-oslo.rootwrap, python-novaclient
-+Depends: python (>= 2.7), python (<< 2.8), python:any (>= 2.7.1-0ubuntu2), python-pbr, python-paste, python-pastedeploy, python-routes, python-anyjson, python-babel, python-eventlet, python-greenlet, python-httplib2, python-requests, python-iso8601, python-jsonrpclib, python-jinja2, python-kombu, python-netaddr, python-sqlalchemy (>= 1.0~), python-sqlalchemy (<< 1.1), python-webob, python-heatclient, python-keystoneclient, alembic, python-six, python-stevedore, python-oslo.config, python-oslo.messaging, python-oslo.rootwrap, python-novaclient
- Section: python
- Priority: optional
- Description: OpenStack servicevm/device manager
-EOFDC
-    cd "$MYDIR"
-    echo "Patching  deb..."
-    dpkg -b "$TMPDIR" "${MYDIR}/${SERVER}"
-    rm -r "$TMPDIR"
-    dpkg -i "${MYDIR}/${SERVER}"
-}
-
-# Function deploys Tacker-server (installs missing mandatory files: upstart, default)
-function deployTackerServer () {
-    rm -rf /etc/default/tacker-server
-    cat > /etc/default/tacker-server <<EOFTD
-ENABLED=true
-PIDFILE=/var/run/tacker/tacker-server.pid
-LOGFILE=/var/log/tacker/tacker-server.log
-PATH="\${PATH:+\$PATH:}/usr/sbin:/sbin"
-TMPDIR=/var/lib/tacker/tmp
-EOFTD
-    rm -rf /etc/init/tacker.conf
-    cat > /etc/init/tacker.conf <<EOFSC
-# tacker-server - Provides the Tacker servicevm/device manager service
-description      "Openstack Tacker Server"
-author           "Ferenc Cserepkei <ferenc.cserepkei@ericsson.com>"
-
-start on runlevel [2345]
-stop on runlevel [!2345]
-
-respawn
-respawn limit 20 5
-limit nofile 65535 65535
-
-chdir /var/run
-
-pre-start script
-  # stop job from continuing if no config file found for daemon
-  [ ! -f /etc/default/tacker-server ] && { stop; exit 0; }
-  [ ! -f /etc/tacker/tacker.conf ]  && { stop; exit 0; }
-
-  # source the config file
-  . /etc/default/tacker-server
-
-  # stop job from continuing if admin has not enabled service in
-  # config file.
-  [ -z "\$ENABLED" ] && { stop; exit 0; }
-
-  mkdir -p /var/run/tacker
-  mkdir -p /var/log/tacker
-  echo "Starting tacker server"
-end script
-
-pre-stop script
-  echo "Stopping tacker server"
-end script
-
-exec /usr/bin/python /usr/bin/tacker-server --log-file=/var/log/tacker/tacker-server.log -v -d --config-file=/etc/tacker/tacker.conf
-EOFSC
-}
-
-# Function installs python-tackerclient from github
-function deployTackerClient() {
-    if [[ -e "${MYDIR}/${CLIENT}" ]]; then
-        echo "$CLIENT exists."
-        return 1
-    fi
-    cd $MYDIR
-    rm -rf $CLIREPO
-    dpkg --purge python-tackerclient
-    git clone -b 'SFC_refactor' https://github.com/trozet/python-tackerclient.git $CLIREPO
-    cd $CLIREPO
-    python setup.py --command-packages=stdeb.command bdist_deb
-    cd "deb_dist"
-    CLIENT=$(echo python-python-tackerclient_*_all.deb)
-    cp $CLIENT $MYDIR
-    dpkg -i "${MYDIR}/${CLIENT}"
-}
-
-# Function removes the cloned git repositories
-function remove_repo () {
-    if [[ -d "${MYDIR}/${1}" ]]; then
-        rm -r "$1"
-    fi
-}
-
-# Funcion copies and installs built artifact on all remaining cluster nodes
-function populate_client() {
-    wget -O deb http://archive.ubuntu.com/ubuntu/pool/universe/s/sshpass/sshpass_1.05-1_amd64.deb &&\
-    dpkg -i deb &&\
-    rm deb
-
-    clusternodes=$(sshpass -p "r00tme" ssh ${SSH_OPTIONS[@]} root@10.20.0.2 fuel node | cut -d '|' -f 5 | grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}" )
-    myaddr=$(ifconfig br-fw-admin | sed -n '/inet addr/s/.*addr.\([^ ]*\) .*/\1/p')
-    for anode in $clusternodes ; do
-        if [ "$anode" != "$myaddr" ] ; then
-            echo "Installing $CLIENT on $anode"
-            scp ${SSH_OPTIONS[@]} -i "${MYDIR}/.ssh/id_rsa" ${CLIENT} ${fadm}@${anode}:${CLIENT}
-            ssh ${SSH_OPTIONS[@]} -i "${MYDIR}/.ssh/id_rsa" ${fadm}@${anode} sudo dpkg -i ${CLIENT}
-            ssh ${SSH_OPTIONS[@]} -i "${MYDIR}/.ssh/id_rsa" ${fadm}@${anode} rm ${CLIENT}
-        fi
-    done
-}
-
-# Function orchestrate the Tacker service
-function orchestrate () {
-    rm -rf /etc/puppet/modules/tacker
-    pushd /etc/puppet/modules
-    git clone https://github.com/trozet/puppet-tacker.git tacker
-    rm -rf /etc/puppet/modules/tacker/.git
-    popd
-
-    ### Facts ###
-
-    # Port(s)   Protocol ServiceDetails Source
-    # 8805-8872 tcp,udp  Unassigned     IANA
-    bind_port='8808'
-
-    auth_uri=$(crudini --get '/etc/heat/heat.conf' 'keystone_authtoken' 'auth_uri')
-    identity_uri=$(crudini --get '/etc/heat/heat.conf' 'keystone_authtoken' 'identity_uri')
-    int_addr=$(ifconfig br-mesh | sed -n '/inet addr/s/.*addr.\([^ ]*\) .*/\1/p')
-    odl_addr=$(hiera management_vip)
-    mgmt_addr=$(ifconfig br-mgmt | sed -n '/inet addr/s/.*addr.\([^ ]*\) .*/\1/p')
-    pub_addr=$(ifconfig br-ex-lnx | sed -n '/inet addr/s/.*addr.\([^ ]*\) .*/\1/p')
-    rabbit_host=$(crudini --get '/etc/heat/heat.conf' 'oslo_messaging_rabbit' 'rabbit_hosts'| cut -d ':' -f 1)
-    rabbit_password=$(crudini --get '/etc/heat/heat.conf' 'oslo_messaging_rabbit' 'rabbit_password')
-    sql_host=$(hiera database_vip)
-    database_connection="mysql://tacker:tacker@${sql_host}/tacker"
-    internal_url="http://${int_addr}:${bind_port}"
-    admin_url="http://${mgmt_addr}:${bind_port}"
-    public_url="http://${pub_addr}:${bind_port}"
-    heat_api_vip=$(crudini --get '/etc/heat/heat.conf' 'heat_api' 'bind_host')
-    allowed_hosts="[ '${sql_host}', '${HOSTNAME%%.domain.tld}', 'localhost', '127.0.0.1', '%' ]"
-    heat_uri="http://${heat_api_vip}:8004/v1"
-    odl_port='8282'
-    service_tenant='services'
-    myRegion='RegionOne'
-    myPassword='tacker'
-
-    cat > configure_tacker.pp << EOF
-   class mysql::config {}
-   include mysql::config
-   class mysql::server {}
-   include mysql::server
-
-   class { 'tacker':
-     package_ensure        => 'absent',
-     client_package_ensure => 'absent',
-     bind_port             => '${bind_port}',
-     keystone_password     => '${myPassword}',
-     keystone_tenant       => '${service_tenant}',
-     auth_uri              => '${auth_uri}',
-     identity_uri          => '${identity_uri}',
-     database_connection   => '${database_connection}',
-     rabbit_host           => '${rabbit_host}',
-     rabbit_password       => '${rabbit_password}',
-     heat_uri              => '${heat_uri}',
-     opendaylight_host     => '${odl_addr}',
-     opendaylight_port     => '${odl_port}',
-   }
-
-   class { 'tacker::db::mysql':
-       password      => '${myPassword}',
-       allowed_hosts => ${allowed_hosts},
-   }
-
-   class { 'tacker::keystone::auth':
-     password            => '${myPassword}',
-     tenant              => '${service_tenant}',
-     admin_url           => '${admin_url}',
-     internal_url        => '${internal_url}',
-     public_url          => '${public_url}',
-     region              => '${myRegion}',
-   }
-EOF
-
-    apt-get install -y mysql-client-5.5
-    cat > /usr/bin/tacker-manage <<EOFAKEMANAGE
-#!/bin/bash
-EOFAKEMANAGE
-    chmod +x /usr/bin/tacker-manage
-    puppet apply configure_tacker.pp
-    rm -f tackerc
-    cat > tackerc <<EOFRC
-#!/bin/sh
-export LC_ALL=C
-export OS_NO_CACHE='true'
-export OS_TENANT_NAME='${service_tenant}'
-export OS_PROJECT_NAME='${service_tenant}'
-export OS_USERNAME='tacker'
-export OS_PASSWORD='${myPassword}'
-export OS_AUTH_URL='${auth_uri}'
-export OS_DEFAULT_DOMAIN='default'
-export OS_AUTH_STRATEGY='keystone'
-export OS_REGION_NAME='${myRegion}'
-export TACKER_ENDPOINT_TYPE='internalURL'
-EOFRC
-    chmod +x tackerc
-}
-
-# Funcion copies and installs built environment settings on all remaining cluster nodes
-function populate_rc() {
-    wget -O deb http://archive.ubuntu.com/ubuntu/pool/universe/s/sshpass/sshpass_1.05-1_amd64.deb &&\
-    dpkg -i deb &&\
-    rm deb
-
-    clusternodes=$(sshpass -p "r00tme" ssh ${SSH_OPTIONS[@]} root@10.20.0.2 fuel node | cut -d '|' -f 5 | grep -E -o "([0-9]{1,3}[\.]){3}[0-9]{1,3}" )
-    myaddr=$(ifconfig br-fw-admin | sed -n '/inet addr/s/.*addr.\([^ ]*\) .*/\1/p')
-    for anode in $clusternodes ; do
-        if [ "$anode" != "$myaddr" ] ; then
-            echo "Populating settings to $anode"
-            scp ${SSH_OPTIONS[@]} -i "${MYDIR}/.ssh/id_rsa" tackerc ${fadm}@${anode}:tackerc
-        fi
-    done
-}
-
-
-envSetup
-deployTackerClient
-deployJsonrpclib
-buildTackerServer
-blessPackage
-deployTackerServer
-populate_client
-orchestrate
-populate_rc
-
-git clone https://github.com/trozet/sfc-random.git
-
-remove_repo "$MYREPO"
-remove_repo "$DEPREPO"
-remove_repo "$CLIREPO"
-
-echo "Built: ${MYDIR}/${OUTPUT}"
-echo "Built: ${MYDIR}/${CLIENT}"
-echo "Built: ${MYDIR}/${JSONRPC}"
-echo "tackerc - mandatory environmental parameters file created"