Adding Mitaka networking-old module with the ODL topology based port

binding resolution mechanism from https://review.openstack.org/333186

Change-Id: I10d400aac9bb639c146527f0f93e6925cb74d9de
Signed-off-by: Wojciech Dec <wdec@cisco.com>

1 files changed, 307 insertions, 0 deletions

diff --git a/networking-odl/devstack/entry_points b/networking-odl/devstack/entry_points
new file mode 100644
index 0000000..647960f
--- /dev/null
+++ b/networking-odl/devstack/entry_points
@@ -0,0 +1,307 @@
+#!/bin/bash
+
+
+# cleanup_opendaylight() - Remove residual data files, anything left over
+# from previous runs that a clean run would need to clean up
+function cleanup_opendaylight {
+    # Wipe out the data, journal and snapshots directories ... grumble grumble grumble
+    rm -rf $ODL_DIR/$ODL_NAME/{data,journal,snapshots}
+
+    # Remove existing logfiles
+    if [[ -n "$LOGDIR" ]]; then
+        rm -f "$LOGDIR/$ODL_KARAF_LOG_BASE*"
+    fi
+    if [[ -n "$SCREEN_LOGDIR" ]]; then
+        rm -f "$SCREEN_LOGDIR/$ODL_KARAF_LOG_BASE*"
+    fi
+    rm -f "$DEST/logs/$ODL_KARAF_LOG_BASE*"
+
+    move_interface_addresses "outof_bridge"
+
+    unbind_opendaylight_controller
+}
+
+
+# configure_opendaylight() - Set config files, create data dirs, etc
+function configure_opendaylight {
+    echo "Configuring OpenDaylight"
+
+    # The logging config file in ODL
+    local ODL_LOGGING_CONFIG=${ODL_DIR}/${ODL_NAME}/etc/org.ops4j.pax.logging.cfg
+
+    # Add netvirt feature in Karaf, if it's not already there
+    local ODLFEATUREMATCH=$(cat $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg | \
+                            grep featuresBoot= | grep $ODL_NETVIRT_KARAF_FEATURE)
+    if [ "$ODLFEATUREMATCH" == "" ]; then
+        sed -i "/^featuresBoot=/ s/$/,$ODL_NETVIRT_KARAF_FEATURE/" \
+               $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg
+    fi
+
+    if [[ "$ODL_RELEASE" =~ "helium" ]]; then
+        # Move Tomcat to $ODL_PORT
+        local _ODLPORT=$(cat $ODL_DIR/$ODL_NAME/configuration/tomcat-server.xml | \
+                         grep $ODL_PORT)
+        if [ "$_ODLPORT" == "" ]; then
+            sed -i "/\<Connector port/ s/808./$ODL_PORT/" \
+                   $ODL_DIR/$ODL_NAME/configuration/tomcat-server.xml
+        fi
+    else
+        # Move Jetty to $ODL_PORT
+        local _ODLPORT=$(cat $ODL_DIR/$ODL_NAME/etc/jetty.xml | grep $ODL_PORT)
+        if [ "$_ODLPORT" == "" ]; then
+            sed -i "/\<Property name\=\"jetty\.port/ s/808./$ODL_PORT/" \
+                   $ODL_DIR/$ODL_NAME/etc/jetty.xml
+        fi
+    fi
+
+    # Configure L3 if the user wants it for NETVIRT_OVSDB
+    # L3 is always enabled in NETVIRT_VPNSERVICE
+    if [[ ",$ODL_NETVIRT_KARAF_FEATURE," =~ ",$ODL_NETVIRT_KARAF_FEATURE_OVSDB," ]] && [ "${ODL_L3}" == "True" ]; then
+        # Configure L3 FWD if it's not there
+        local L3FWD=$(cat $ODL_DIR/$ODL_NAME/etc/custom.properties | \
+                      grep ^ovsdb.l3.fwd.enabled)
+        if [ "$L3FWD" == "" ]; then
+            echo "ovsdb.l3.fwd.enabled=yes" >> $ODL_DIR/$ODL_NAME/etc/custom.properties
+        fi
+
+        # Configure L3 GW MAC if it's not there
+        local L3GW_MAC=$(cat $ODL_DIR/$ODL_NAME/etc/custom.properties | \
+                         grep ^ovsdb.l3gateway.mac)
+        if [[ -z "$L3GW_MAC" && -n "$ODL_L3GW_MAC" ]]; then
+            echo "ovsdb.l3gateway.mac=$ODL_L3GW_MAC" >> $ODL_DIR/$ODL_NAME/etc/custom.properties
+        fi
+    fi
+
+    # Remove existing logfiles
+    local ODL_LOGDIR=$DEST/logs
+    if [[ -n "$LOGDIR" ]]; then
+        ODL_LOGDIR=$LOGDIR
+    fi
+
+    rm -f "$ODL_LOGDIR/$ODL_KARAF_LOG_BASE*"
+    # Log karaf output to a file
+    _LF=$ODL_LOGDIR/$ODL_KARAF_LOG_NAME
+    LF=$(echo $_LF | sed 's/\//\\\//g')
+    # Soft link for easy consumption
+    sudo mkdir -p "$ODL_LOGDIR"
+    ln -sf $_LF "$ODL_LOGDIR/screen-karaf.log"
+    if [[ -n $SCREEN_LOGDIR ]]; then
+        ln -sf $_LF "$SCREEN_LOGDIR/screen-karaf.log"
+    fi
+
+    # Change the karaf logfile
+    # disable log rotation by setting max fiel size large enough
+    sed -i -e "/^log4j\.appender\.out\.file/ s/.*/log4j\.appender\.out\.file\=$LF/" \
+           -e "/^log4j\.appender\.out\.maxFileSize/ s/.*/log4j\.appender\.out\.maxFileSize\=1024GB/" \
+    $ODL_DIR/$ODL_NAME/etc/org.ops4j.pax.logging.cfg
+
+    # Configure DEBUG logs for network virtualization in odl, if the user wants it
+    if [ "${ODL_NETVIRT_DEBUG_LOGS}" == "True" ]; then
+        local OVSDB_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | grep ^log4j.logger.org.opendaylight.ovsdb)
+        if [ "${OVSDB_DEBUG_LOGS}" == "" ]; then
+            echo 'log4j.logger.org.opendaylight.ovsdb = TRACE, out' >> $ODL_LOGGING_CONFIG
+            echo 'log4j.logger.org.opendaylight.ovsdb.lib = INFO, out' >> $ODL_LOGGING_CONFIG
+            echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.NeutronL3Adapter = DEBUG, out' >> $ODL_LOGGING_CONFIG
+            echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.TenantNetworkManagerImpl = DEBUG, out' >> $ODL_LOGGING_CONFIG
+            echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.providers.openflow13.services.arp.GatewayMacResolverService = DEBUG, out' >> $ODL_LOGGING_CONFIG
+            echo 'log4j.logger.org.opendaylight.ovsdb.plugin.md.OvsdbInventoryManager = INFO, out' >> $ODL_LOGGING_CONFIG
+        fi
+        if [[ "$ODL_RELEASE" =~ "helium" ]]; then
+            local ODL_NEUTRON_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | \
+                        grep ^log4j.logger.org.opendaylight.controller.networkconfig.neutron)
+            if [ "${ODL_NEUTRON_DEBUG_LOGS}" == "" ]; then
+                echo 'log4j.logger.org.opendaylight.controller.networkconfig.neutron = TRACE, out' >> $ODL_LOGGING_CONFIG
+            fi
+        else
+            local ODL_NEUTRON_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | \
+                        grep ^log4j.logger.org.opendaylight.neutron)
+            if [ "${ODL_NEUTRON_DEBUG_LOGS}" == "" ]; then
+                echo 'log4j.logger.org.opendaylight.neutron = TRACE, out' >> $ODL_LOGGING_CONFIG
+            fi
+        fi
+    fi
+}
+
+# configure_neutron_opendaylight() - Set Neutron config files according to ODL settings
+function configure_neutron_odl {
+    echo "Configuring ML2 for OpenDaylight"
+    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl url=$ODL_ENDPOINT
+    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl username=$ODL_USERNAME
+    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl password=$ODL_PASSWORD
+    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl port_binding_controller=$ODL_PORT_BINDING_CONTROLLER
+    # When it's not set, the default value is set by networking-odl
+    if [[ -n "$ODL_HOSTCONF_URI" ]]; then
+        populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl odl_hostconf_uri=$ODL_HOSTCONF_URI
+    fi
+}
+
+function configure_neutron_odl_lightweight_testing {
+    echo "Configuring lightweight testing for OpenDaylight"
+    populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl enable_lightweight_testing=True
+}
+
+# init_opendaylight() - Initialize databases, etc.
+function init_opendaylight {
+    # clean up from previous (possibly aborted) runs
+    # create required data files
+    :
+}
+
+
+# install_opendaylight() - Collect source and prepare
+function install_opendaylight {
+    echo "Installing OpenDaylight and dependent packages"
+    if [[ "$ODL_USING_EXISTING_JAVA" != "True" ]]
+    then
+        if ! setup_java "${ODL_REQUIRED_JAVA_VERSION:-7}"; then
+            exit 1
+        fi
+    fi
+
+    install_opendaylight_neutron_thin_ml2_driver
+
+    # Download OpenDaylight
+    cd $ODL_DIR
+
+    if [[ "$OFFLINE" != "True" ]]; then
+        wget -N $ODL_URL/$ODL_PKG
+    fi
+    unzip -u -o $ODL_PKG
+}
+
+
+# install_opendaylight_neutron_thin_ml2_driver() - Install the ML2 driver
+function install_opendaylight_neutron_thin_ml2_driver {
+    echo "Installing the Networking-ODL driver for OpenDaylight"
+    setup_develop $NETWORKING_ODL_DIR
+}
+
+
+# install_opendaylight_compute() - Make sure OVS is installed
+function install_opendaylight_compute {
+    if [[ "$SKIP_OVS_INSTALL" = "True" ]]; then
+        echo "Skipping OVS installation."
+    else
+        # packages are the same as for Neutron OVS agent
+        _neutron_ovs_base_install_agent_packages
+    fi
+}
+
+
+# start_opendaylight() - Start running processes, including screen
+function start_opendaylight {
+    echo "Starting OpenDaylight"
+
+    # Wipe out the data and journal directories ... grumble grumble grumble
+    rm -rf $ODL_DIR/$ODL_NAME/{data,journal}
+
+    # The following variables are needed by the running karaf process.
+    # See the "bin/setenv" file in the OpenDaylight distribution for
+    # their individual meaning.
+    setup_java_env
+    export JAVA_MIN_MEM=$ODL_JAVA_MIN_MEM
+    export JAVA_MAX_MEM=$ODL_JAVA_MAX_MEM
+    export JAVA_MAX_PERM_MEM=$ODL_JAVA_MAX_PERM_MEM
+    run_process odl-server "$ODL_DIR/$ODL_NAME/bin/start"
+
+    if [ -n "$ODL_BOOT_WAIT_URL" ]; then
+        echo "Waiting for Opendaylight to start via $ODL_BOOT_WAIT_URL ..."
+        # Probe ODL restconf for netvirt until it is operational
+        local testcmd="curl -o /dev/null --fail --silent --head -u \
+              ${ODL_USERNAME}:${ODL_PASSWORD} http://${ODL_MGR_IP}:${ODL_PORT}/${ODL_BOOT_WAIT_URL}"
+        test_with_retry "$testcmd" "Opendaylight did not start after $ODL_BOOT_WAIT" \
+              $ODL_BOOT_WAIT $ODL_RETRY_SLEEP_INTERVAL
+    else
+        echo "Waiting for Opendaylight to start ..."
+        # Sleep a bit to let OpenDaylight finish starting up
+        sleep $ODL_BOOT_WAIT
+    fi
+}
+
+
+# stop_opendaylight() - Stop running processes (non-screen)
+function stop_opendaylight {
+    # Stop the karaf container
+    $ODL_DIR/$ODL_NAME/bin/stop
+    stop_process odl-server
+}
+
+
+# cleanup_opendaylight_compute() - Remove all OVS ports, bridges and disconnects
+# controller from switch
+function cleanup_opendaylight_compute {
+    # Remove the patch ports
+    for port in $(sudo ovs-vsctl show | grep Port | awk '{print $2}'  | cut -d '"' -f 2 | grep patch); do
+        sudo ovs-vsctl del-port ${port}
+    done
+
+    # remove all OVS ports that look like Neutron created ports
+    for port in $(sudo ovs-vsctl list port | grep -o -e tap[0-9a-f\-]* -e q[rg]-[0-9a-f\-]*); do
+        sudo ovs-vsctl del-port ${port}
+    done
+
+    # Remove all the vxlan ports
+    for port in $(sudo ovs-vsctl list port | grep name | grep vxlan | awk '{print $3}'  | cut -d '"' -f 2); do
+        sudo ovs-vsctl del-port ${port}
+    done
+
+    # Disconnect controller from switch
+    unbind_opendaylight_controller
+
+    # remove all OVS bridges created by ODL
+    for bridge in $(sudo ovs-vsctl list-br | grep -o -e ${OVS_BR} -e ${PUBLIC_BRIDGE}); do
+        sudo ovs-vsctl del-br ${bridge}
+    done
+}
+
+# bind_opendaylight_controller() - set control manager to OVS
+function bind_opendaylight_controller {
+    echo_summary "Initializing OpenDaylight"
+    ODL_LOCAL_IP=${ODL_LOCAL_IP:-$HOST_IP}
+    ODL_MGR_PORT=${ODL_MGR_PORT:-6640}
+    ODL_OVS_MANAGERS=${ODL_OVS_MANAGERS:-$ODL_MGR_IP}
+    read ovstbl <<< $(sudo ovs-vsctl get Open_vSwitch . _uuid)
+    local ODL_MANAGERS_PARAM=()
+    for manager in $(echo $ODL_OVS_MANAGERS | tr "," "\n"); do
+        # ovsdbd doesn't understand localhost. replace it to numerical ip address
+        ODL_MANAGERS_PARAM=( "${ODL_MANAGERS_PARAM[@]}" "tcp:${manager/localhost/127.0.0.1}:$ODL_MGR_PORT" )
+    done
+    # don't overwrite the already existing managers
+    local ODL_MANAGERS_OLD=$(sudo ovs-vsctl get-manager)
+    local ODL_MANAGERS=$(echo $ODL_MANAGERS_OLD ${ODL_MANAGERS_PARAM[@]} | tr ' ' '\n' | sort | uniq | tr '\n' ' ')
+    sudo ovs-vsctl set-manager ${ODL_MANAGERS}
+    if [[ -n "$ODL_PROVIDER_MAPPINGS" ]]; then
+        sudo ovs-vsctl set Open_vSwitch $ovstbl \
+            other_config:provider_mappings=$ODL_PROVIDER_MAPPINGS
+    fi
+    sudo ovs-vsctl set Open_vSwitch $ovstbl other_config:local_ip=$ODL_LOCAL_IP
+}
+
+# unbind_opendaylight_controller() - disconnect controller from switch and clear bridges
+function unbind_opendaylight_controller {
+    sudo ovs-vsctl del-manager
+    BRIDGES=$(sudo ovs-vsctl list-br)
+    for bridge in $BRIDGES ; do
+        sudo ovs-vsctl del-controller $bridge
+     done
+}
+
+
+# configure_opendaylight_l3() - configure bridges for OpenDaylight L3 forwarding
+function configure_opendaylight_l3 {
+    wait_for_active_bridge $PUBLIC_BRIDGE $ODL_RETRY_SLEEP_INTERVAL $ODL_BOOT_WAIT
+
+    # Note: as of Lithium-SR3 and Beryllium releases, ODL will add the OVS port(s)
+    #       to the external bridge via the ODL_PROVIDER_MAPPINGS method. Being so,
+    #       the usage of PUBLIC_INTERFACE is no longer necessary in ODL devstack.
+
+    # DEPRECATED: Add public interface to public bridge, if needed
+    if [[ -n "$PUBLIC_INTERFACE" && "$PUBLIC_INTERFACE" != "br100" ]]; then
+        deprecated "Adding $PUBLIC_INTERFACE to $PUBLIC_BRIDGE."
+        deprecated "Use ODL_PROVIDER_MAPPINGS instead of PUBLIC_INTERFACE."
+        sudo ovs-vsctl --no-wait -- --may-exist add-port $PUBLIC_BRIDGE $PUBLIC_INTERFACE
+        sudo ip link set $PUBLIC_INTERFACE up
+    fi
+
+    move_interface_addresses "into_bridge"
+}