diff options
Diffstat (limited to 'docs/requirements')
| -rw-r--r-- | docs/requirements/03-architecture.rst | 12 | ||||
| -rw-r--r-- | docs/requirements/04-gaps.rst | 55 | ||||
| -rw-r--r-- | docs/requirements/05-implementation.rst | 1 | ||||
| -rw-r--r-- | docs/requirements/07-annex.rst | 2 |
4 files changed, 44 insertions, 26 deletions
diff --git a/docs/requirements/03-architecture.rst b/docs/requirements/03-architecture.rst index 9f620e68..d9ccd221 100644 --- a/docs/requirements/03-architecture.rst +++ b/docs/requirements/03-architecture.rst @@ -261,7 +261,8 @@ physical resource from 'enabled' to 'going-to-maintenance' and a timeout [#timeo After receiving the MaintenanceRequest,the VIM decides on the actions to be taken based on maintenance policies predefined by the affected Consumer(s). -.. [#timeout] Timeout is set by the Administrator and corresponds to the maximum time to empty the physical resources. +.. [#timeout] Timeout is set by the Administrator and corresponds to the maximum time + to empty the physical resources. .. figure:: images/figure5a.png :name: figure5a @@ -322,11 +323,12 @@ shown in :numref:`figure5c`. It consists of the following steps: 5. The Consumer C3 switches to standby configuration (STBY). -6. Instructions from Consumers C2/C3 are shared to VIM requesting certain actions to be performed (steps 6a, 6b). - The VIM executes the requested actions and sends back a NACK to consumer C2 (step 6d) as the - migration of the virtual resource(s) is not completed by the given timeout. +6. Instructions from Consumers C2/C3 are shared to VIM requesting certain actions to be performed + (steps 6a, 6b). The VIM executes the requested actions and sends back a NACK to consumer C2 + (step 6d) as the migration of the virtual resource(s) is not completed by the given timeout. 7. The VIM switches the physical resources to "enabled" state. -8. MaintenanceResponse is sent from VIM to inform the Administrator that the maintenance action cannot start. +8. MaintenanceNotification is sent from VIM to inform the Administrator that the maintenance action + cannot start. .. diff --git a/docs/requirements/04-gaps.rst b/docs/requirements/04-gaps.rst index 154f8e43..b8ff7f2e 100644 --- a/docs/requirements/04-gaps.rst +++ b/docs/requirements/04-gaps.rst @@ -61,6 +61,13 @@ Immediate Notification - Fault notifications cannot be received immediately by Ceilometer. +* Solved by + + + Event Alarm Evaluator: + https://specs.openstack.org/openstack/ceilometer-specs/specs/liberty/event-alarm-evaluator.html + + New OpenStack alarms and notifications project AODH: + http://docs.openstack.org/developer/aodh/ + Maintenance Notification ^^^^^^^^^^^^^^^^^^^^^^^^ @@ -98,7 +105,7 @@ Maintenance Notification - VIM user cannot receive maintenance notifications. -* Related blueprints +* Solved by + https://blueprints.launchpad.net/nova/+spec/service-status-notification @@ -126,6 +133,10 @@ Normalization of data collection models - Normalized data format does not exist. +* Solved by + + + Specification in Section :ref:`southbound`. + OpenStack --------- @@ -157,7 +168,7 @@ ________________________________ - Ceilometer seems to be unsuitable for monitoring medium and large scale NFVI deployments. -* Related blueprints +* Solved by + Usage of Zabbix for fault aggregation [ZABB]_. Zabbix can support a much higher number of fault events (up to 15 thousand events per second, but @@ -189,13 +200,14 @@ ___________________________________ - OpenStack Ceilometer does not monitor hardware and software to capture faults. - + Gap + + Gap - - Ceilometer is not able to detect and handle all faults listed in the Annex. + - Ceilometer is not able to detect and handle all faults listed in the Annex. -* Related blueprints / workarounds +* Solved by - - Use other dedicated monitoring tools like Zabbix or Monasca + + Use of dedicated monitoring tools like Zabbix or Monasca. + See :ref:`nfvi_faults`. Nova ^^^^ @@ -218,15 +230,14 @@ ________________________________________ + To-be - - There needs to be API to change VM power_State in case host has failed. - - There needs to be API to change nova-compute state. + - The API shall support to change VM power state in case host has failed. + - The API shall support to change nova-compute state. - There could be single API to change different VM states for all VMs - belonging to specific host. - - As external system monitoring the infra calls these APIs change can be - fast and reliable. - - Correlation actions can be faster and automated as states are reliable. - - User will be able to read states from OpenStack and trust they are - correct. + belonging to a specific host. + - Support external systems that are monitoring the infrastructure and resources + that are able to call the API fast and reliable. + - Resource states are reliable such that correlation actions can be fast and automated. + - User shall be able to read states from OpenStack and trust they are correct. + As-is @@ -240,12 +251,11 @@ ________________________________________ + Gap - OpenStack does not change its states fast and reliably enough. - - There is API missing to have external system to change states and to - trust the states are then reliable (external system has fenced failed - host). + - The API does not support to have an external system to change states and to + trust the states are reliable (external system has fenced failed host). - User cannot read all the states from OpenStack nor trust they are right. -* Related blueprints +* Solved by + https://blueprints.launchpad.net/nova/+spec/mark-host-down + https://blueprints.launchpad.net/python-novaclient/+spec/support-force-down-service @@ -309,7 +319,7 @@ _________________ underlying root cause of failure. Knowing the root cause can help filter out unnecessary and overwhelming alarms. -* Related blueprints / workarounds +* Status + Monasca as of now lacks this feature, although the community is aware and working toward supporting it. @@ -334,7 +344,7 @@ _________________ - Sensor monitoring is very important. It provides operators status on the state of the physical infrastructure (e.g. temperature, fans). -* Related blueprints / workarounds +* Addressed by + Monasca can be configured to use third-party monitoring solutions (e.g. Nagios, Cacti) for retrieving additional data. @@ -370,7 +380,10 @@ _____________________________ + Gap - - Cause of the delay needs to be identified and fixed + - Cause of the delay is a periodic evaluation and notification. Periodicity is configured + as 30s default value and can be reduced to 5s but not below. + https://github.com/zabbix/zabbix/blob/trunk/conf/zabbix_server.conf#L329 + .. vim: set tabstop=4 expandtab textwidth=80: diff --git a/docs/requirements/05-implementation.rst b/docs/requirements/05-implementation.rst index 4c89fdf5..848d5a04 100644 --- a/docs/requirements/05-implementation.rst +++ b/docs/requirements/05-implementation.rst @@ -728,6 +728,7 @@ Other areas that need alignment is the so called alarm state in NFV. Here we mus however consider what can be attributes of the notification vs. what should be a property of the alarm instance. This will be analyzed later. +.. _southbound: Detailed southbound interface specification ------------------------------------------- diff --git a/docs/requirements/07-annex.rst b/docs/requirements/07-annex.rst index 8cb19612..2ebba0d8 100644 --- a/docs/requirements/07-annex.rst +++ b/docs/requirements/07-annex.rst @@ -1,6 +1,8 @@ .. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 +.. _nfvi_faults: + Annex: NFVI Faults ================================================= |