summaryrefslogtreecommitdiffstats
path: root/docs/development/requirements/03-architecture.rst
diff options
context:
space:
mode:
authorRyota Mibu <r-mibu@cq.jp.nec.com>2017-02-17 04:36:05 +0000
committerGerrit Code Review <gerrit@opnfv.org>2017-02-17 04:36:05 +0000
commitf3ab498aaddb27f6f598a84e2dbe0203ced6d666 (patch)
treefc7b2be2681db87adc1eb935e6fdcc93a8bc1645 /docs/development/requirements/03-architecture.rst
parent5d9c24fd28bcc02243306a8c96d0c68809523343 (diff)
parentd0b22e1d856cf8f78e152dfb6c150e001e03dd52 (diff)
Merge "Update docs structure according to new guidelines in https://wiki.opnfv.org/display/DOC"
Diffstat (limited to 'docs/development/requirements/03-architecture.rst')
-rw-r--r--docs/development/requirements/03-architecture.rst340
1 files changed, 340 insertions, 0 deletions
diff --git a/docs/development/requirements/03-architecture.rst b/docs/development/requirements/03-architecture.rst
new file mode 100644
index 00000000..b7417691
--- /dev/null
+++ b/docs/development/requirements/03-architecture.rst
@@ -0,0 +1,340 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+High level architecture and general features
+============================================
+
+Functional overview
+-------------------
+
+The Doctor project circles around two distinct use cases: 1) management of
+failures of virtualized resources and 2) planned maintenance, e.g. migration, of
+virtualized resources. Both of them may affect a VNF/application and the network
+service it provides, but there is a difference in frequency and how they can be
+handled.
+
+Failures are spontaneous events that may or may not have an impact on the
+virtual resources. The Consumer should as soon as possible react to the failure,
+e.g., by switching to the STBY node. The Consumer will then instruct the VIM on
+how to clean up or repair the lost virtual resources, i.e. restore the VM, VLAN
+or virtualized storage. How much the applications are affected varies.
+Applications with built-in HA support might experience a short decrease in
+retainability (e.g. an ongoing session might be lost) while keeping availability
+(establishment or re-establishment of sessions are not affected), whereas the
+impact on applications without built-in HA may be more serious. How much the
+network service is impacted depends on how the service is implemented. With
+sufficient network redundancy the service may be unaffected even when a specific
+resource fails.
+
+On the other hand, planned maintenance impacting virtualized resources are events
+that are known in advance. This group includes e.g. migration due to software
+upgrades of OS and hypervisor on a compute host. Some of these might have been
+requested by the application or its management solution, but there is also a
+need for coordination on the actual operations on the virtual resources. There
+may be an impact on the applications and the service, but since they are not
+spontaneous events there is room for planning and coordination between the
+application management organization and the infrastructure management
+organization, including performing whatever actions that would be required to
+minimize the problems.
+
+Failure prediction is the process of pro-actively identifying situations that
+may lead to a failure in the future unless acted on by means of maintenance
+activities. From applications' point of view, failure prediction may impact them
+in two ways: either the warning time is so short that the application or its
+management solution does not have time to react, in which case it is equal to
+the failure scenario, or there is sufficient time to avoid the consequences by
+means of maintenance activities, in which case it is similar to planned
+maintenance.
+
+Architecture Overview
+---------------------
+
+NFV and the Cloud platform provide virtual resources and related control
+functionality to users and administrators. :numref:`figure3` shows the high
+level architecture of NFV focusing on the NFVI, i.e., the virtualized
+infrastructure. The NFVI provides virtual resources, such as virtual machines
+(VM) and virtual networks. Those virtual resources are used to run applications,
+i.e. VNFs, which could be components of a network service which is managed by
+the consumer of the NFVI. The VIM provides functionalities of controlling and
+viewing virtual resources on hardware (physical) resources to the consumers,
+i.e., users and administrators. OpenStack is a prominent candidate for this VIM.
+The administrator may also directly control the NFVI without using the VIM.
+
+Although OpenStack is the target upstream project where the new functional
+elements (Controller, Notifier, Monitor, and Inspector) are expected to be
+implemented, a particular implementation method is not assumed. Some of these
+elements may sit outside of OpenStack and offer a northbound interface to
+OpenStack.
+
+General Features and Requirements
+---------------------------------
+
+The following features are required for the VIM to achieve high availability of
+applications (e.g., MME, S/P-GW) and the Network Services:
+
+1. Monitoring: Monitor physical and virtual resources.
+2. Detection: Detect unavailability of physical resources.
+3. Correlation and Cognition: Correlate faults and identify affected virtual
+ resources.
+4. Notification: Notify unavailable virtual resources to their Consumer(s).
+5. Fencing: Shut down or isolate a faulty resource.
+6. Recovery action: Execute actions to process fault recovery and maintenance.
+
+The time interval between the instant that an event is detected by the
+monitoring system and the Consumer notification of unavailable resources shall
+be < 1 second (e.g., Step 1 to Step 4 in :numref:`figure4`).
+
+.. figure:: images/figure3.png
+ :name: figure3
+ :width: 100%
+
+ High level architecture
+
+Monitoring
+^^^^^^^^^^
+
+The VIM shall monitor physical and virtual resources for unavailability and
+suspicious behavior.
+
+Detection
+^^^^^^^^^
+
+The VIM shall detect unavailability and failures of physical resources that
+might cause errors/faults in virtual resources running on top of them.
+Unavailability of physical resource is detected by various monitoring and
+managing tools for hardware and software components. This may include also
+predicting upcoming faults. Note, fault prediction is out of scope of this
+project and is investigated in the OPNFV "Data Collection for Failure
+Prediction" project [PRED]_.
+
+The fault items/events to be detected shall be configurable.
+
+The configuration shall enable Failure Selection and Aggregation. Failure
+aggregation means the VIM determines unavailability of physical resource from
+more than two non-critical failures related to the same resource.
+
+There are two types of unavailability - immediate and future:
+
+* Immediate unavailability can be detected by setting traps of raw failures on
+ hardware monitoring tools.
+* Future unavailability can be found by receiving maintenance instructions
+ issued by the administrator of the NFVI or by failure prediction mechanisms.
+
+Correlation and Cognition
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The VIM shall correlate each fault to the impacted virtual resource, i.e., the
+VIM shall identify unavailability of virtualized resources that are or will be
+affected by failures on the physical resources under them. Unavailability of a
+virtualized resource is determined by referring to the mapping of physical and
+virtualized resources.
+
+VIM shall allow configuration of fault correlation between physical and
+virtual resources. VIM shall support correlating faults:
+
+* between a physical resource and another physical resource
+* between a physical resource and a virtual resource
+* between a virtual resource and another virtual resource
+
+Failure aggregation is also required in this feature, e.g., a user may request
+to be only notified if failures on more than two standby VMs in an (N+M)
+deployment model occurred.
+
+Notification
+^^^^^^^^^^^^
+
+The VIM shall notify the alarm, i.e., unavailability of virtual resource(s), to
+the Consumer owning it over the northbound interface, such that the Consumers
+impacted by the failure can take appropriate actions to recover from the
+failure.
+
+The VIM shall also notify the unavailability of physical resources to its
+Administrator.
+
+All notifications shall be transferred immediately in order to minimize the
+stalling time of the network service and to avoid over assignment caused by
+delay of capability updates.
+
+There may be multiple consumers, so the VIM has to find out the owner of a
+faulty resource. Moreover, there may be a large number of virtual and physical
+resources in a real deployment, so polling the state of all resources to the VIM
+would lead to heavy signaling traffic. Thus, a publication/subscription
+messaging model is better suited for these notifications, as notifications are
+only sent to subscribed consumers.
+
+Notifications will be send out along with the configuration by the consumer.
+The configuration includes endpoint(s) in which the consumers can specify
+multiple targets for the notification subscription, so that various and
+multiple receiver functions can consume the notification message.
+Also, the conditions for notifications shall be configurable, such that
+the consumer can set according policies, e.g. whether it wants to receive
+fault notifications or not.
+
+Note: the VIM should only accept notification subscriptions for each resource
+by its owner or administrator.
+Notifications to the Consumer about the unavailability of virtualized
+resources will include a description of the fault, preferably with sufficient
+abstraction rather than detailed physical fault information.
+
+.. _fencing:
+
+Fencing
+^^^^^^^
+Recovery actions, e.g. safe VM evacuation, have to be preceded by fencing the
+failed host. Fencing hereby means to isolate or shut down a faulty resource.
+Without fencing -- when the perceived disconnection is due to some transient
+or partial failure -- the evacuation might lead into two identical instances
+running together and having a dangerous conflict.
+
+There is a cross-project definition in OpenStack of how to implement
+fencing, but there has not been any progress. The general description is
+available here:
+https://wiki.openstack.org/wiki/Fencing_Instances_of_an_Unreachable_Host
+
+OpenStack provides some mechanisms that allow fencing of faulty resources. Some
+are automatically invoked by the platform itself (e.g. Nova disables the
+compute service when libvirtd stops running, preventing new VMs to be scheduled
+to that node), while other mechanisms are consumer trigger-based actions (e.g.
+Neutron port admin-state-up). For other fencing actions not supported by
+OpenStack, the Doctor project may suggest ways to address the gap (e.g. through
+means of resourcing to external tools and orchestration methods), or
+documenting or implementing them upstream.
+
+The Doctor Inspector component will be responsible of marking resources down in
+the OpenStack and back up if necessary.
+
+Recovery Action
+^^^^^^^^^^^^^^^
+
+In the basic :ref:`uc-fault1` use case, no automatic actions will be taken by
+the VIM, but all recovery actions executed by the VIM and the NFVI will be
+instructed and coordinated by the Consumer.
+
+In a more advanced use case, the VIM may be able to recover the failed virtual
+resources according to a pre-defined behavior for that resource. In principle
+this means that the owner of the resource (i.e., its consumer or administrator)
+can define which recovery actions shall be taken by the VIM. Examples are a
+restart of the VM or migration/evacuation of the VM.
+
+
+
+High level northbound interface specification
+---------------------------------------------
+
+Fault Management
+^^^^^^^^^^^^^^^^
+
+This interface allows the Consumer to subscribe to fault notification from the
+VIM. Using a filter, the Consumer can narrow down which faults should be
+notified. A fault notification may trigger the Consumer to switch from ACT to
+STBY configuration and initiate fault recovery actions. A fault query
+request/response message exchange allows the Consumer to find out about active
+alarms at the VIM. A filter can be used to narrow down the alarms returned in
+the response message.
+
+.. figure:: images/figure4.png
+ :name: figure4
+ :width: 100%
+
+ High-level message flow for fault management
+
+The high level message flow for the fault management use case is shown in
+:numref:`figure4`.
+It consists of the following steps:
+
+1. The VIM monitors the physical and virtual resources and the fault management
+ workflow is triggered by a monitored fault event.
+2. Event correlation, fault detection and aggregation in VIM. Note: this may
+ also happen after Step 3.
+3. Database lookup to find the virtual resources affected by the detected fault.
+4. Fault notification to Consumer.
+5. The Consumer switches to standby configuration (STBY).
+6. Instructions to VIM requesting certain actions to be performed on the
+ affected resources, for example migrate/update/terminate specific
+ resource(s). After reception of such instructions, the VIM is executing the
+ requested action, e.g., it will migrate or terminate a virtual resource.
+
+NFVI Maintenance
+^^^^^^^^^^^^^^^^
+
+The NFVI maintenance interface allows the Administrator to notify the VIM about
+a planned maintenance operation on the NFVI. A maintenance operation may for
+example be an update of the server firmware or the hypervisor. The
+MaintenanceRequest message contains instructions to change the state of the
+physical resource from 'enabled' to 'going-to-maintenance' and a timeout [#timeout]_.
+After receiving the MaintenanceRequest,the VIM decides on the actions to be taken
+based on maintenance policies predefined by the affected Consumer(s).
+
+.. [#timeout] Timeout is set by the Administrator and corresponds to the maximum time
+ to empty the physical resources.
+
+.. figure:: images/figure5a.png
+ :name: figure5a
+ :width: 100%
+
+ High-level message flow for maintenance policy enforcement
+
+The high level message flow for the NFVI maintenance policy enforcement is shown
+in :numref:`figure5a`. It consists of the following steps:
+
+1. Maintenance trigger received from Administrator.
+2. VIM switches the affected physical resources to "going-to-maintenance" state e.g. so that no new
+ VM will be scheduled on the physical servers.
+3. Database lookup to find the Consumer(s) and virtual resources affected by the maintenance
+ operation.
+4. Maintenance policies are enforced in the VIM, e.g. affected VM(s) are shut down
+ on the physical server(s), or affected Consumer(s) are notified about the planned
+ maintenance operation (steps 4a/4b).
+
+
+Once the affected Consumer(s) have been notified, they take specific actions (e.g. switch to standby
+(STBY) configuration, request to terminate the virtual resource(s)) to allow the maintenance
+action to be executed. After the physical resources have been emptied, the VIM puts the physical
+resources in "in-maintenance" state and sends a MaintenanceResponse back to the Administrator.
+
+.. figure:: images/figure5b.png
+ :name: figure5b
+ :width: 100%
+
+ Successful NFVI maintenance
+
+The high level message flow for a successful NFVI maintenance is show in :numref:`figure5b`.
+It consists of the following steps:
+
+5. The Consumer C3 switches to standby configuration (STBY).
+6. Instructions from Consumers C2/C3 are shared to VIM requesting certain actions to be performed
+ (steps 6a, 6b). After receiving such instructions, the VIM executes the requested
+ action in order to empty the physical resources (step 6c) and informs the
+ Consumer about the result of the actions (steps 6d, 6e).
+7. The VIM switches the physical resources to "in-maintenance" state
+8. Maintenance response is sent from VIM to inform the Administrator that the physical
+ servers have been emptied.
+9. The Administrator is coordinating and executing the maintenance
+ operation/work on the NFVI. Note: this step is out of scope of Doctor project.
+
+The requested actions to empty the physical resources may not be successful (e.g. migration fails
+or takes too long) and in such a case, the VIM puts the physical resources back to 'enabled' and
+informs the Administrator about the problem.
+
+.. figure:: images/figure5c.png
+ :name: figure5c
+ :width: 100%
+
+ Example of failed NFVI maintenance
+
+An example of a high level message flow to cover the failed NFVI maintenance case is
+shown in :numref:`figure5c`.
+It consists of the following steps:
+
+5. The Consumer C3 switches to standby configuration (STBY).
+6. Instructions from Consumers C2/C3 are shared to VIM requesting certain actions to be performed
+ (steps 6a, 6b). The VIM executes the requested actions and sends back a NACK to consumer C2
+ (step 6d) as the migration of the virtual resource(s) is not completed by the given timeout.
+7. The VIM switches the physical resources to "enabled" state.
+8. MaintenanceNotification is sent from VIM to inform the Administrator that the maintenance action
+ cannot start.
+
+
+..
+ vim: set tabstop=4 expandtab textwidth=80:
+