diff options
Diffstat (limited to 'docs/release/installation/vmdeploy.rst')
| -rw-r--r-- | docs/release/installation/vmdeploy.rst | 41 |
1 files changed, 33 insertions, 8 deletions
diff --git a/docs/release/installation/vmdeploy.rst b/docs/release/installation/vmdeploy.rst index 5da3949b..64d16a96 100644 --- a/docs/release/installation/vmdeploy.rst +++ b/docs/release/installation/vmdeploy.rst @@ -134,20 +134,45 @@ HeartBeat network is selected,and if it is configured in network.yml,the keepali Start Deployment (Virtual Deployment) ------------------------------------- -(1) Git clone the latest daisy4nfv code from opnfv: "git clone https://gerrit.opnfv.org/gerrit/daisy" +(1) Git clone the latest daisy4nfv code from opnfv: "git clone https://gerrit.opnfv.org/gerrit/daisy", +make sure the current branch is master -(2) Download latest bin file(such as opnfv-2017-06-06_23-00-04.bin) of daisy from http://artifacts.opnfv.org/daisy.html and change the bin file name(such as opnfv-2017-06-06_23-00-04.bin) to opnfv.bin +(2) Download latest bin file(such as opnfv-2017-06-06_23-00-04.bin) of daisy from +http://artifacts.opnfv.org/daisy.html and change the bin file name(such as opnfv-2017-06-06_23-00-04.bin) +to opnfv.bin. Check the https://build.opnfv.org/ci/job/daisy-os-odl-nofeature-ha-baremetal-daily-master/, +and if the 'snaps_health_check' of functest result is 'PASS', +you can use this verify-passed bin to deploy the openstack in your own environment -(3) Make sure the opnfv.bin file is in daisy4nfv code dir +(3) Assumed cloned dir is $workdir, which laid out like below: +[root@daisyserver daisy]# ls +ci code deploy docker docs INFO LICENSE requirements.txt setup.py templates test-requirements.txt tests tools tox.ini +Make sure the opnfv.bin file is in $workdir -(4) Create folder of labs/zte/virtual1/daisy/config in daisy4nfv code dir +(4) Enter into $workdir, Create folder of labs/zte/virtual1/daisy/config in $workdir -(5) Move the daisy/deploy/config/vm_environment/zte-virtual1/deploy.yml and daisy/deploy/config/vm_environment/zte-virtual1/network.yml to labs/zte/virtual1/daisy/config dir. +(5) Move the deploy/config/vm_environment/zte-virtual1/deploy.yml and +deploy/config/vm_environment/zte-virtual1/network.yml to +labs/zte/virtual1/daisy/config dir. Note: -zte-virtual1 config file is just for all-in-one deployment,if you want to deploy openstack with five node(1 lb node and 4 computer nodes),change the zte-virtual1 to zte-virtual2 +zte-virtual1 config file deploy openstack with five nodes(3 lb nodes and 2 computer nodes), +if you want to deploy an all-in-one openstack, change the zte-virtual1 to zte-virtual2 + +Note: +If selinux is disabled on the host, please delete all xml files section of below lines in dir templates/virtual_environment/vms/ + <seclabel type='dynamic' model='selinux' relabel='yes'> + <label>system_u:system_r:svirt_t:s0:c182,c195</label> + <imagelabel>system_u:object_r:svirt_image_t:s0:c182,c195</imagelabel> + </seclabel> (6) Run the script deploy.sh in daisy/ci/deploy/ with command: -sudo ./ci/deploy/deploy.sh -b ../daisy -l zte -p virtual1 -s os-nosdn-nofeature-noha +sudo ./ci/deploy/deploy.sh -b ./ -l zte -p virtual1 -s os-nosdn-nofeature-ha + +Note: +The value after -p parameter(virtual1) is get from labs/zte/virtual1/daisy/config/ +The value after -l parameter(zte) is get from labs/ +The value after -s "os-nosdn-nofeature-ha" used for deploy multinode openstack +The value after -s "os-nosdn-nofeature-noha" used for deploy all-in-one openstack -(7) When deploy successfully,the floating ip of openstack is 10.20.11.11,the login account is "admin" and the password is "keystone" +(7) When deploy successfully,the floating ip of openstack is 10.20.11.11, +the login account is "admin" and the password is "keystone" |