diff options
Diffstat (limited to 'docs/installationprocedure/vmdeploy.rst')
| -rw-r--r-- | docs/installationprocedure/vmdeploy.rst | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/docs/installationprocedure/vmdeploy.rst b/docs/installationprocedure/vmdeploy.rst deleted file mode 100644 index 2ed6b001..00000000 --- a/docs/installationprocedure/vmdeploy.rst +++ /dev/null @@ -1,144 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. -.. http://creativecommons.org/licenses/by/4.0 - -Installation Guide (Virtual Deployment) -======================================= - -Nodes Configuration (Virtual Deployment) ----------------------------------------- - -The below file is the inventory template of deployment nodes: - -"./deploy/conf/vm_environment/zte-virtual1/deploy.yml" - -You can write your own name/roles reference into it. - - - name -- Host name for deployment node after installation. - - - roles -- Components deployed. - -**Set TYPE and FLAVOR** - -E.g. - -.. code-block:: yaml - - TYPE: virtual - FLAVOR: cluster - -**Assignment of different roles to servers** - -E.g. OpenStack only deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - - name: host2 - roles: - - compute - -NOTE: -WE JUST SUPPORT ONE CONTROLLER NODE NOW. - -E.g. OpenStack and ceph deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - - name: host2 - roles: - - compute - -Network Configuration (Virtual Deployment) ------------------------------------------- - -Before deployment, there are some network configurations to be checked based -on your network topology. The default network configuration file for Daisy is -"daisy/deploy/config/vm_environment/zte-virtual1/network.yml". -You can write your own reference into it. - -**The following figure shows the default network configuration.** - -.. code-block:: console - - - +-B/M--------+------------------------------+ - |Jumperserver+ | - +------------+ +--+ | - | | | | - | +-V/M--------+ | | | - | | Daisyserver+------+ | | - | +------------+ | | | - | | | | - | +--+ | | | - | | | +-V/M--------+ | | | - | | +-------+ Controller +------+ | | - | | | | ODL(Opt.) | | | | - | | | | Network | | | | - | | | | Ceph1 | | | | - | | | +------------+ | | | - | | | | | | - | | | | | | - | | | | | | - | | | +-V/M--------+ | | | - | | +-------+ Compute1 +------+ | | - | | | | Ceph2 | | | | - | | | +------------+ | | | - | | | | | | - | | | | | | - | | | | | | - | | | +-V/M--------+ | | | - | | +-------+ Compute2 +------+ | | - | | | | Ceph3 | | | | - | | | +------------+ | | | - | | | | | | - | | | | | | - | | | | | | - | +--+ +--+ | - | ^ ^ | - | | | | - | | | | - | /---------------------------\ | | - | | External Network | | | - | \---------------------------/ | | - | /-----------------------+---\ | - | | Installation Network | | - | | Public/Private API | | - | | Internet Access | | - | | Tenant Network | | - | | Storage Network | | - | | HeartBeat Network | | - | \---------------------------/ | - +-------------------------------------------+ - - - -Note: For Flat External networks(which is used by default), a physical interface is needed on each compute node for ODL NetVirt recent versions. -HeartBeat network is selected,and if it is configured in network.yml,the keepalived interface will be the heartbeat interface. - -Start Deployment (Virtual Deployment) -------------------------------------- - -(1) Git clone the latest daisy4nfv code from opnfv: "git clone https://gerrit.opnfv.org/gerrit/daisy" - -(2) Download latest bin file(such as opnfv-2017-06-06_23-00-04.bin) of daisy from http://artifacts.opnfv.org/daisy.html and change the bin file name(such as opnfv-2017-06-06_23-00-04.bin) to opnfv.bin - -(3) Make sure the opnfv.bin file is in daisy4nfv code dir - -(4) Create folder of labs/zte/virtual1/daisy/config in daisy4nfv code dir - -(5) Move the daisy/deploy/config/vm_environment/zte-virtual1/deploy.yml and daisy/deploy/config/vm_environment/zte-virtual1/network.yml to labs/zte/virtual1/daisy/config dir. -Notes:zte-virtual1 config file is just for all-in-one deployment,if you want to deploy openstack with five node(1 lb node and 4 computer nodes),change the zte-virtual1 to zte-virtual2 - -(6) Run the script deploy.sh in daisy/ci/deploy/ with command: -sudo ./ci/deploy/deploy.sh -b ../daisy -l zte -p virtual1 -s os-nosdn-nofeature-noha - -(7) When deploy successfully,the floating ip of openstack is 10.20.11.11,the login account is "admin" and the password is "keystone" |