Correct line endings

JIRA: COPPER-4

Change-Id: Icb470d8ba9f477b0696f2abaab8271bdbf0fcb57
Signed-off-by: blsaws <bryan.sullivan@att.com>

3 files changed, 584 insertions, 584 deletions

diff --git a/tests/adhoc/smoke01.sh b/tests/adhoc/smoke01.sh
index bf330d1..a7790d5 100644
--- a/tests/adhoc/smoke01.sh
+++ b/tests/adhoc/smoke01.sh
@@ -1,176 +1,176 @@
-#!/bin/bash

-# Copyright 2015-2016 AT&T Intellectual Property, Inc

-#  

-# Licensed under the Apache License, Version 2.0 (the "License");

-# you may not use this file except in compliance with the License.

-# You may obtain a copy of the License at

-#  

-# http://www.apache.org/licenses/LICENSE-2.0

-#  

-# Unless required by applicable law or agreed to in writing, software

-# distributed under the License is distributed on an "AS IS" BASIS,

-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-# See the License for the specific language governing permissions and

-# limitations under the License.

-#

-# What this is: A basic test to validate an OPNFV install. Creates an image,

-# test_public and private networks, a router, and launches two VMs connected to the 

-# private network and thru the router, to the internet.

-#

-# Status: this is a work in progress, under test. Automated ping test to the 

-# internet and between VMs has not yet been implemented.

-#

-# How to use:

-#   Install Congress test server per https://wiki.opnfv.org/copper/academy

-#   $ bash ~/git/copper/tests/adhoc/smoke01.sh

-#   After test, cleanup with

-#   $ bash ~/git/copper/tests/adhoc/smoke01-clean.sh

-

-pass() {

-  echo "Hooray!"

-  set +x #echo off

-  exit 0

-}

-

-# Use this to trigger fail() at the right places

-# if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-fail() {

-  echo "Test Failed!"

-  set +x

-  exit 1

-}

-

-unclean() {

-  echo "Unclean environment!"

-  fail

-}

-

-if [  $# -eq 1 ]; then

-  if [ $1 == "debug" ]; then 

-    set -x #echo on

-  fi

-fi

-

-# Find external network if any, and details

-function get_external_net () {

-  echo "Find external network"

-  LINE=4

-  ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  while [[ $ID ]]

-    do

-    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi

-    ((LINE+=1))

-    ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  done 

-  if [[ $ID ]]; then 

-    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")

-    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")

-  else

-    echo "External network not found"

-    echo "Create external network"

-    neutron net-create public --router:external

-    EXTERNAL_NETWORK_NAME="public"

-    echo "Create external subnet"

-    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1

-    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")

-  fi

-}

-

-wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh

-source ~/setenv.sh

-

-echo "Create cirros-0.3.3-x86_64 image"

-image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")

-if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare

-fi

-

-get_external_net

-

-echo "Create floating IP for external subnet"

-FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")

-FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)

-# Save ID to pass to cleanup script

-echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh

-

-echo "Create internal network"

-neutron net-create internal

-

-echo "Create internal subnet"

-neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8

-

-echo "Create router"

-neutron router-create public_router

-

-echo "Create router gateway"

-neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME

-

-echo "Add router interface for internal network"

-neutron router-interface-add public_router subnet=internal

-

-echo "Wait up to a minute as 'neutron router-interface-add' blocks the neutron-api for some time..."

-COUNTER=1

-RESULT="Failed!"

-until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do

-  echo "Get the internal network ID: try" $COUNTER 

-  internal_NET=$(neutron net-list | awk "/ internal / { print \$2 }")

-  if [ "$internal_NET" != "" ]; then RESULT="Success!"; fi

-  let COUNTER+=1

-  sleep 10

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Create smoke01 security group"

-neutron security-group-create smoke01

-

-echo "Add rule to smoke01 security group"

-neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01

-neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01

-neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01

-neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01

-

-echo "Create Nova key pair"

-ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.10.6

-nova keypair-add smoke01 > /tmp/smoke01

-chmod 600 /tmp/smoke01

-

-echo "Boot cirros1"

-nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 --key-name smoke01 cirros1

-

-echo "Get cirros1 instance ID"

-test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")

-

-echo "Wait for cirros1 to go ACTIVE"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")

-  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Associate floating IP to cirros1"

-nova floating-ip-associate cirros1 $FLOATING_IP

-

-echo "Boot cirros2"

-nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 cirros2

-

-COUNTER=1

-RESULT="Failed!"

-until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do

-  echo "Verify internal network connectivity"

-  RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 10.0.0.4; exit" | awk "/ 0% packet loss/ { print \$1 }")

-  if [ "$RESULT" == "3" ]; then RESULT="Success!"; fi

-  let COUNTER+=1

-  sleep 10

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Verify public network connectivity"

-RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 8.8.8.8; exit" | awk "/ 0% packet loss/ { print \$1 }")

-if [ "$RESULT" != "3" ]; then fail; fi

-

-set +x #echo off

-

-pass

+#!/bin/bash
+# Copyright 2015-2016 AT&T Intellectual Property, Inc
+#  
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#  
+# http://www.apache.org/licenses/LICENSE-2.0
+#  
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# What this is: A basic test to validate an OPNFV install. Creates an image,
+# test_public and private networks, a router, and launches two VMs connected to the 
+# private network and thru the router, to the internet.
+#
+# Status: this is a work in progress, under test. Automated ping test to the 
+# internet and between VMs has not yet been implemented.
+#
+# How to use:
+#   Install Congress test server per https://wiki.opnfv.org/copper/academy
+#   $ bash ~/git/copper/tests/adhoc/smoke01.sh
+#   After test, cleanup with
+#   $ bash ~/git/copper/tests/adhoc/smoke01-clean.sh
+
+pass() {
+  echo "Hooray!"
+  set +x #echo off
+  exit 0
+}
+
+# Use this to trigger fail() at the right places
+# if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+fail() {
+  echo "Test Failed!"
+  set +x
+  exit 1
+}
+
+unclean() {
+  echo "Unclean environment!"
+  fail
+}
+
+if [  $# -eq 1 ]; then
+  if [ $1 == "debug" ]; then 
+    set -x #echo on
+  fi
+fi
+
+# Find external network if any, and details
+function get_external_net () {
+  echo "Find external network"
+  LINE=4
+  ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  while [[ $ID ]]
+    do
+    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi
+    ((LINE+=1))
+    ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  done 
+  if [[ $ID ]]; then 
+    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")
+    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")
+  else
+    echo "External network not found"
+    echo "Create external network"
+    neutron net-create public --router:external
+    EXTERNAL_NETWORK_NAME="public"
+    echo "Create external subnet"
+    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1
+    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")
+  fi
+}
+
+wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh
+source ~/setenv.sh
+
+echo "Create cirros-0.3.3-x86_64 image"
+image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")
+if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare
+fi
+
+get_external_net
+
+echo "Create floating IP for external subnet"
+FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
+FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)
+# Save ID to pass to cleanup script
+echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh
+
+echo "Create internal network"
+neutron net-create internal
+
+echo "Create internal subnet"
+neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8
+
+echo "Create router"
+neutron router-create public_router
+
+echo "Create router gateway"
+neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME
+
+echo "Add router interface for internal network"
+neutron router-interface-add public_router subnet=internal
+
+echo "Wait up to a minute as 'neutron router-interface-add' blocks the neutron-api for some time..."
+COUNTER=1
+RESULT="Failed!"
+until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do
+  echo "Get the internal network ID: try" $COUNTER 
+  internal_NET=$(neutron net-list | awk "/ internal / { print \$2 }")
+  if [ "$internal_NET" != "" ]; then RESULT="Success!"; fi
+  let COUNTER+=1
+  sleep 10
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Create smoke01 security group"
+neutron security-group-create smoke01
+
+echo "Add rule to smoke01 security group"
+neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01
+neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01
+neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01
+neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01
+
+echo "Create Nova key pair"
+ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.10.6
+nova keypair-add smoke01 > /tmp/smoke01
+chmod 600 /tmp/smoke01
+
+echo "Boot cirros1"
+nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 --key-name smoke01 cirros1
+
+echo "Get cirros1 instance ID"
+test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")
+
+echo "Wait for cirros1 to go ACTIVE"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")
+  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Associate floating IP to cirros1"
+nova floating-ip-associate cirros1 $FLOATING_IP
+
+echo "Boot cirros2"
+nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 cirros2
+
+COUNTER=1
+RESULT="Failed!"
+until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do
+  echo "Verify internal network connectivity"
+  RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 10.0.0.4; exit" | awk "/ 0% packet loss/ { print \$1 }")
+  if [ "$RESULT" == "3" ]; then RESULT="Success!"; fi
+  let COUNTER+=1
+  sleep 10
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Verify public network connectivity"
+RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 8.8.8.8; exit" | awk "/ 0% packet loss/ { print \$1 }")
+if [ "$RESULT" != "3" ]; then fail; fi
+
+set +x #echo off
+
+pass
diff --git a/tests/dmz.sh b/tests/dmz.sh
index 326e04e..666c285 100644
--- a/tests/dmz.sh
+++ b/tests/dmz.sh
@@ -1,236 +1,236 @@
-#!/bin/bash

-# Copyright 2015-2016 AT&T Intellectual Property, Inc

-#  

-# Licensed under the Apache License, Version 2.0 (the "License");

-# you may not use this file except in compliance with the License.

-# You may obtain a copy of the License at

-#  

-# http://www.apache.org/licenses/LICENSE-2.0

-#  

-# Unless required by applicable law or agreed to in writing, software

-# distributed under the License is distributed on an "AS IS" BASIS,

-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-# See the License for the specific language governing permissions and

-# limitations under the License.

-#

-

-# What this is: An OpenStack Congress policy test. Sets up and validates policy

-# creation and execution for:

-# 1) Identifying VMs connected to a DMZ (currently identified through a 

-#    specifically-named security group)

-# 2) Identifying VMs connected per (1), which are by policy not allowed to be

-#    (currently implemented through an image tag intended to identify images

-#    that are "authorized" i.e. tested and secure, to be DMZ-connected)

-# 3) Reactively enforce the dmz placement rule by pausing VMs found to be in

-#    violation of the policy.

-#

-# Status: this is a work in progress, under test.

-#

-# Prequisite: OPFNV installed per JOID or Apex installer

-# - OpenStack CLI environment variables setup

-# How to use:

-#   # Create Congress policy and resources that exercise policy

-#   $ bash dmz.sh

-#   # After test, cleanup

-#   $ bash dmz-clean.sh

-

-pass() {

-  echo "Hooray!"

-  set +x #echo off

-  exit 0

-}

-

-# Use this to trigger fail() at the right places

-# if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-fail() {

-  echo "Test Failed!"

-  set +x

-  exit 1

-}

-

-unclean() {

-  echo "Unclean environment!"

-  fail

-}

-

-if [  $# -eq 1 ]; then

-  if [ $1 == "debug" ]; then 

-    set -x #echo on

-  fi

-fi

-

-# Find external network if any, and details

-function get_external_net () {

-  echo "Find external network"

-  LINE=4

-  ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  while [[ $ID ]]

-    do

-    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi

-    ((LINE+=1))

-    ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  done 

-  if [[ $ID ]]; then 

-    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")

-    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")

-  else

-    echo "External network not found"

-    echo "Create external network"

-    neutron net-create public --router:external

-    EXTERNAL_NETWORK_NAME="public"

-    echo "Create external subnet"

-    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1

-    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")

-  fi

-}

-

-echo "Create Congress policy 'test'"

-if [ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]; then unclean; fi

-openstack congress policy create test

-

-echo "Create dmz_server rule in policy 'test'"

-openstack congress policy rule create test "dmz_server(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(id, device_id, status='ACTIVE'),  neutronv2:security_group_port_bindings(id, sg), neutronv2:security_groups(sg,name='dmz')" --name dmz_server

-

-echo "Create dmz_placement_error rule in policy 'test'"

-openstack congress policy rule create test "dmz_placement_error(id) :- nova:servers(id,name,hostId,status,tenant_id,user_id,image,flavor,az,hh), not glancev2:tags(image,'dmz'), dmz_server(id)" --name dmz_placement_error

-

-echo "Create image cirros1 with non-dmz image"

-image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")

-if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare

-fi

-

-echo "Create image cirros2 with dmz image"

-image=$(openstack image list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }")

-if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64-dmz --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare

-fi

-

-echo "Get image ID of cirros dmz image"

-IMAGE_ID=$(glance image-list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }")

-

-echo "Add 'dmz' image tag to the cirros dmz image"

-glance --os-image-api-version 2 image-tag-update $IMAGE_ID "dmz"

-

-get_external_net

-

-echo "Create floating IP for external subnet"

-FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")

-FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)

-# Save ID to pass to cleanup script

-echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh

-

-echo "Create internal network"

-if [ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]; then unclean; fi

-neutron net-create test_internal

-

-echo "Create internal subnet"

-neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8

-

-echo "Create router"

-if [ $(neutron router-list | awk "/ test_router / { print \$2 }") ]; then unclean; fi

-neutron router-create test_router

-

-echo "Create router gateway"

-neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME

-

-echo "Add router internal for internal network"

-neutron router-interface-add test_router subnet=test_internal

-

-COUNTER=1

-RESULT="Failed!"

-until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do

-  echo "Get the internal network ID: try" $COUNTER 

-  test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }")

-  if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi

-  let COUNTER+=1

-  sleep 10

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Create a security group 'dmz'"

-if [ $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then unclean; fi

-neutron security-group-create dmz

-if [ -z $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then 

-  echo "Unable to create security group"

-  fail

-fi

-

-echo "Create security group ingress rule for 'dmz'"

-neutron security-group-rule-create --direction ingress dmz

-

-echo "Boot cirros1 with non-dmz image"

-nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups dmz cirros1

-

-echo "Get cirros1 instance ID"

-test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")

-

-echo "Wait for cirros1 to go ACTIVE"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")

-  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Associate floating IP to cirros1"

-nova floating-ip-associate cirros1 $FLOATING_IP

-

-echo "Boot cirros2 with dmz image"

-nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64-dmz --nic net-id=$test_internal_NET  --security-groups dmz cirros2

-test_cirros2_ID=$(nova list | awk "/ cirros2 / { print \$2 }")

-if [ -z $test_cirros1_ID ]; then 

-  echo "Unable to boot cirros2"

-  fail

-fi

-

-echo "Wait 5 seconds for Congress polling to occur at least once"

-sleep 5

-

-echo "Verify cirros1 and cirros2 IDs are in the Congress policy 'test' table 'dmz_server'"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  openstack congress policy row list test dmz_server

-  dmz_cirros1=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros1_ID / { print \$2 }")

-  dmz_cirros2=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros2_ID / { print \$2 }")

-  if [[ "$dmz_cirros1" == "$test_cirros1_ID" && "$dmz_cirros2" == "$test_cirros2_ID" ]]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-echo "dmz_server table entries present for cirros1, cirros2:" $RESULT

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Verify cirros1 ID is in the Congress policy 'test' table 'dmz_placement_error'"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  openstack congress policy row list test dmz_placement_error

-  dmz_cirros1=$(openstack congress policy row list test dmz_placement_error | awk "/ $test_cirros1_ID / { print \$2 }")

-  if [ "$dmz_cirros1" == "$test_cirros1_ID" ]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-echo "dmz_placement_error table entry present for cirros2:" $RESULT

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Create reactive 'paused_dmz_placement_error' rule in policy 'test'"

-openstack congress policy rule create test "execute[nova:servers.pause(id)] :- dmz_placement_error(id), nova:servers(id,status='ACTIVE')" --name paused_dmz_placement_error

-

-echo "Verify cirros1 is paused"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  nova list

-  cirros1_status=$(nova list | awk "/ cirros1 / { print \$6 }")

-  if [ "$cirros1_status" == "PAUSED" ]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-echo "Verify cirros1 is paused:" $RESULT

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-set +x #echo off

-

-pass

+#!/bin/bash
+# Copyright 2015-2016 AT&T Intellectual Property, Inc
+#  
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#  
+# http://www.apache.org/licenses/LICENSE-2.0
+#  
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# What this is: An OpenStack Congress policy test. Sets up and validates policy
+# creation and execution for:
+# 1) Identifying VMs connected to a DMZ (currently identified through a 
+#    specifically-named security group)
+# 2) Identifying VMs connected per (1), which are by policy not allowed to be
+#    (currently implemented through an image tag intended to identify images
+#    that are "authorized" i.e. tested and secure, to be DMZ-connected)
+# 3) Reactively enforce the dmz placement rule by pausing VMs found to be in
+#    violation of the policy.
+#
+# Status: this is a work in progress, under test.
+#
+# Prequisite: OPFNV installed per JOID or Apex installer
+# - OpenStack CLI environment variables setup
+# How to use:
+#   # Create Congress policy and resources that exercise policy
+#   $ bash dmz.sh
+#   # After test, cleanup
+#   $ bash dmz-clean.sh
+
+pass() {
+  echo "Hooray!"
+  set +x #echo off
+  exit 0
+}
+
+# Use this to trigger fail() at the right places
+# if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+fail() {
+  echo "Test Failed!"
+  set +x
+  exit 1
+}
+
+unclean() {
+  echo "Unclean environment!"
+  fail
+}
+
+if [  $# -eq 1 ]; then
+  if [ $1 == "debug" ]; then 
+    set -x #echo on
+  fi
+fi
+
+# Find external network if any, and details
+function get_external_net () {
+  echo "Find external network"
+  LINE=4
+  ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  while [[ $ID ]]
+    do
+    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi
+    ((LINE+=1))
+    ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  done 
+  if [[ $ID ]]; then 
+    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")
+    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")
+  else
+    echo "External network not found"
+    echo "Create external network"
+    neutron net-create public --router:external
+    EXTERNAL_NETWORK_NAME="public"
+    echo "Create external subnet"
+    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1
+    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")
+  fi
+}
+
+echo "Create Congress policy 'test'"
+if [ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]; then unclean; fi
+openstack congress policy create test
+
+echo "Create dmz_server rule in policy 'test'"
+openstack congress policy rule create test "dmz_server(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(id, device_id, status='ACTIVE'),  neutronv2:security_group_port_bindings(id, sg), neutronv2:security_groups(sg,name='dmz')" --name dmz_server
+
+echo "Create dmz_placement_error rule in policy 'test'"
+openstack congress policy rule create test "dmz_placement_error(id) :- nova:servers(id,name,hostId,status,tenant_id,user_id,image,flavor,az,hh), not glancev2:tags(image,'dmz'), dmz_server(id)" --name dmz_placement_error
+
+echo "Create image cirros1 with non-dmz image"
+image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")
+if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare
+fi
+
+echo "Create image cirros2 with dmz image"
+image=$(openstack image list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }")
+if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64-dmz --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare
+fi
+
+echo "Get image ID of cirros dmz image"
+IMAGE_ID=$(glance image-list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }")
+
+echo "Add 'dmz' image tag to the cirros dmz image"
+glance --os-image-api-version 2 image-tag-update $IMAGE_ID "dmz"
+
+get_external_net
+
+echo "Create floating IP for external subnet"
+FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
+FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)
+# Save ID to pass to cleanup script
+echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh
+
+echo "Create internal network"
+if [ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]; then unclean; fi
+neutron net-create test_internal
+
+echo "Create internal subnet"
+neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8
+
+echo "Create router"
+if [ $(neutron router-list | awk "/ test_router / { print \$2 }") ]; then unclean; fi
+neutron router-create test_router
+
+echo "Create router gateway"
+neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME
+
+echo "Add router internal for internal network"
+neutron router-interface-add test_router subnet=test_internal
+
+COUNTER=1
+RESULT="Failed!"
+until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do
+  echo "Get the internal network ID: try" $COUNTER 
+  test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }")
+  if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi
+  let COUNTER+=1
+  sleep 10
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Create a security group 'dmz'"
+if [ $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then unclean; fi
+neutron security-group-create dmz
+if [ -z $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then 
+  echo "Unable to create security group"
+  fail
+fi
+
+echo "Create security group ingress rule for 'dmz'"
+neutron security-group-rule-create --direction ingress dmz
+
+echo "Boot cirros1 with non-dmz image"
+nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups dmz cirros1
+
+echo "Get cirros1 instance ID"
+test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")
+
+echo "Wait for cirros1 to go ACTIVE"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")
+  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Associate floating IP to cirros1"
+nova floating-ip-associate cirros1 $FLOATING_IP
+
+echo "Boot cirros2 with dmz image"
+nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64-dmz --nic net-id=$test_internal_NET  --security-groups dmz cirros2
+test_cirros2_ID=$(nova list | awk "/ cirros2 / { print \$2 }")
+if [ -z $test_cirros1_ID ]; then 
+  echo "Unable to boot cirros2"
+  fail
+fi
+
+echo "Wait 5 seconds for Congress polling to occur at least once"
+sleep 5
+
+echo "Verify cirros1 and cirros2 IDs are in the Congress policy 'test' table 'dmz_server'"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  openstack congress policy row list test dmz_server
+  dmz_cirros1=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros1_ID / { print \$2 }")
+  dmz_cirros2=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros2_ID / { print \$2 }")
+  if [[ "$dmz_cirros1" == "$test_cirros1_ID" && "$dmz_cirros2" == "$test_cirros2_ID" ]]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+echo "dmz_server table entries present for cirros1, cirros2:" $RESULT
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Verify cirros1 ID is in the Congress policy 'test' table 'dmz_placement_error'"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  openstack congress policy row list test dmz_placement_error
+  dmz_cirros1=$(openstack congress policy row list test dmz_placement_error | awk "/ $test_cirros1_ID / { print \$2 }")
+  if [ "$dmz_cirros1" == "$test_cirros1_ID" ]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+echo "dmz_placement_error table entry present for cirros2:" $RESULT
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Create reactive 'paused_dmz_placement_error' rule in policy 'test'"
+openstack congress policy rule create test "execute[nova:servers.pause(id)] :- dmz_placement_error(id), nova:servers(id,status='ACTIVE')" --name paused_dmz_placement_error
+
+echo "Verify cirros1 is paused"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  nova list
+  cirros1_status=$(nova list | awk "/ cirros1 / { print \$6 }")
+  if [ "$cirros1_status" == "PAUSED" ]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+echo "Verify cirros1 is paused:" $RESULT
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+set +x #echo off
+
+pass
diff --git a/tests/smtp_ingress.sh b/tests/smtp_ingress.sh
index 555a8f4..c950f8a 100644
--- a/tests/smtp_ingress.sh
+++ b/tests/smtp_ingress.sh
@@ -1,172 +1,172 @@
-#!/bin/bash

-# Copyright 2015-2016 AT&T Intellectual Property, Inc

-#  

-# Licensed under the Apache License, Version 2.0 (the "License");

-# you may not use this file except in compliance with the License.

-# You may obtain a copy of the License at

-#  

-# http://www.apache.org/licenses/LICENSE-2.0

-#  

-# Unless required by applicable law or agreed to in writing, software

-# distributed under the License is distributed on an "AS IS" BASIS,

-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-# See the License for the specific language governing permissions and

-# limitations under the License.

-#

-

-# What this is: An OpenStack Congress policy test. Sets up and validates policy

-# creation and execution for:

-# 1) Identifying VMs that have STMP (TCP port 25) open for ingress.

-#

-# Status: this is a work in progress, under test. 

-#

-# Prequisite: OPFNV installed per JOID or Apex installer

-# - OpenStack CLI environment variables setup

-# How to use:

-#   # Create Congress policy and resources that exercise policy

-#   $ bash smtp_ingress.sh

-#   # After test, cleanup

-#   $ bash smtp_ingress-clean.sh

-

-pass() {

-  echo "Hooray!"

-  set +x #echo off

-  exit 0

-}

-

-# Use this to trigger fail() at the right places

-# if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-fail() {

-  echo "Test Failed!"

-  set +x #echo off

-  exit 1

-}

-

-unclean() {

-  echo "Unclean environment!"

-  fail

-}

-

-if [  $# -eq 1 ]; then

-  if [ $1 == "debug" ]; then 

-    set -x #echo on

-  fi

-fi

-

-# Find external network if any, and details

-function get_external_net () {

-  echo "Find external network"

-  LINE=4

-  ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  while [[ $ID ]]

-    do

-    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi

-    ((LINE+=1))

-    ID=$(openstack network list | awk "NR==$LINE{print \$2}")

-  done 

-  if [[ $ID ]]; then 

-    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")

-    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")

-  else

-    echo "External network not found"

-    echo "Create external network"

-    neutron net-create public --router:external

-    EXTERNAL_NETWORK_NAME="public"

-    echo "Create external subnet"

-    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1

-    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")

-  fi

-}

-

-echo "Create Congress policy 'test'"

-if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi

-openstack congress policy create test

-

-echo "Create smtp_ingress rule in policy 'test'"

-openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress

-

-echo "Create image cirros1"

-image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")

-if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare

-fi

-

-get_external_net

-

-echo "Create floating IP for external subnet"

-FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")

-FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)

-# Save ID to pass to cleanup script

-echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh

-

-echo "Create internal network"

-if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi

-neutron net-create test_internal

-

-echo "Create internal subnet"

-neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8

-

-echo "Create router"

-if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi

-neutron router-create test_router

-

-echo "Create router gateway"

-neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME

-

-echo "Add router internal for internal network"

-neutron router-interface-add test_router subnet=test_internal

-

-COUNTER=1

-RESULT="Failed!"

-until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do

-  echo "Get the internal network ID: try" $COUNTER 

-  test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }")

-  if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi

-  let COUNTER+=1

-  sleep 10

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Create a security group 'smtp_ingress'"

-if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi

-neutron security-group-create smtp_ingress

-

-echo "Create security group ingress rule for 'smtp_ingress'"

-neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress

-

-echo "Boot cirros1 with smtp_ingress security group"

-nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1

-

-echo "Get cirros1 instance ID"

-test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")

-

-echo "Wait for cirros1 to go ACTIVE"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")

-  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi

-  let COUNTER-=1

-  sleep 5

-done

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-echo "Associate floating IP to cirros1"

-nova floating-ip-associate cirros1 $FLOATING_IP

-

-echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'"

-COUNTER=5

-RESULT="Test Failed!"

-until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do

-  openstack congress policy row list test smtp_ingress 

-  cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }")

-  if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!"

-  fi

-  let COUNTER-=1

-  sleep 10

-done

-echo $RESULT

-if [ "$RESULT" == "Test Failed!" ]; then fail; fi

-

-set +x #echo off

-

-pass

+#!/bin/bash
+# Copyright 2015-2016 AT&T Intellectual Property, Inc
+#  
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#  
+# http://www.apache.org/licenses/LICENSE-2.0
+#  
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# What this is: An OpenStack Congress policy test. Sets up and validates policy
+# creation and execution for:
+# 1) Identifying VMs that have STMP (TCP port 25) open for ingress.
+#
+# Status: this is a work in progress, under test. 
+#
+# Prequisite: OPFNV installed per JOID or Apex installer
+# - OpenStack CLI environment variables setup
+# How to use:
+#   # Create Congress policy and resources that exercise policy
+#   $ bash smtp_ingress.sh
+#   # After test, cleanup
+#   $ bash smtp_ingress-clean.sh
+
+pass() {
+  echo "Hooray!"
+  set +x #echo off
+  exit 0
+}
+
+# Use this to trigger fail() at the right places
+# if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+fail() {
+  echo "Test Failed!"
+  set +x #echo off
+  exit 1
+}
+
+unclean() {
+  echo "Unclean environment!"
+  fail
+}
+
+if [  $# -eq 1 ]; then
+  if [ $1 == "debug" ]; then 
+    set -x #echo on
+  fi
+fi
+
+# Find external network if any, and details
+function get_external_net () {
+  echo "Find external network"
+  LINE=4
+  ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  while [[ $ID ]]
+    do
+    if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi
+    ((LINE+=1))
+    ID=$(openstack network list | awk "NR==$LINE{print \$2}")
+  done 
+  if [[ $ID ]]; then 
+    EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }")
+    EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }")
+  else
+    echo "External network not found"
+    echo "Create external network"
+    neutron net-create public --router:external
+    EXTERNAL_NETWORK_NAME="public"
+    echo "Create external subnet"
+    neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1
+    EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }")
+  fi
+}
+
+echo "Create Congress policy 'test'"
+if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi
+openstack congress policy create test
+
+echo "Create smtp_ingress rule in policy 'test'"
+openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress
+
+echo "Create image cirros1"
+image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }")
+if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare
+fi
+
+get_external_net
+
+echo "Create floating IP for external subnet"
+FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }")
+FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1)
+# Save ID to pass to cleanup script
+echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh
+
+echo "Create internal network"
+if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi
+neutron net-create test_internal
+
+echo "Create internal subnet"
+neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8
+
+echo "Create router"
+if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi
+neutron router-create test_router
+
+echo "Create router gateway"
+neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME
+
+echo "Add router internal for internal network"
+neutron router-interface-add test_router subnet=test_internal
+
+COUNTER=1
+RESULT="Failed!"
+until [[ "$COUNTER" -gt 6  || "$RESULT" == "Success!" ]]; do
+  echo "Get the internal network ID: try" $COUNTER 
+  test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }")
+  if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi
+  let COUNTER+=1
+  sleep 10
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Create a security group 'smtp_ingress'"
+if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi
+neutron security-group-create smtp_ingress
+
+echo "Create security group ingress rule for 'smtp_ingress'"
+neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress
+
+echo "Boot cirros1 with smtp_ingress security group"
+nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1
+
+echo "Get cirros1 instance ID"
+test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }")
+
+echo "Wait for cirros1 to go ACTIVE"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }")
+  if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi
+  let COUNTER-=1
+  sleep 5
+done
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+echo "Associate floating IP to cirros1"
+nova floating-ip-associate cirros1 $FLOATING_IP
+
+echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'"
+COUNTER=5
+RESULT="Test Failed!"
+until [[ $COUNTER -eq 0  || $RESULT == "Test Success!" ]]; do
+  openstack congress policy row list test smtp_ingress 
+  cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }")
+  if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!"
+  fi
+  let COUNTER-=1
+  sleep 10
+done
+echo $RESULT
+if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+
+set +x #echo off
+
+pass