diff options
author | 2016-05-18 16:07:15 -0700 | |
---|---|---|
committer | 2016-05-18 16:07:15 -0700 | |
commit | a770106f9511b4d57b0a30f2f587345b276da903 (patch) | |
tree | 4581f76b1881328ba7980613032183efb2c7dd55 /components/congress/test-webapp/www/centos-httpd.conf | |
parent | 4b66a66d1a52a4e9cf1ec8a7b0871ec394b82acc (diff) |
Move webapp files, switch to alternate docker install procedure
JIRA: COPPER-4
Change-Id: If6b19e85e81fc8ab3848418a795fee98d27cd249
Signed-off-by: blsaws <bryan.sullivan@att.com>
Diffstat (limited to 'components/congress/test-webapp/www/centos-httpd.conf')
-rw-r--r-- | components/congress/test-webapp/www/centos-httpd.conf | 369 |
1 files changed, 0 insertions, 369 deletions
diff --git a/components/congress/test-webapp/www/centos-httpd.conf b/components/congress/test-webapp/www/centos-httpd.conf deleted file mode 100644 index 701c99f..0000000 --- a/components/congress/test-webapp/www/centos-httpd.conf +++ /dev/null @@ -1,369 +0,0 @@ -# Copyright 2015-2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# What this is: Apache configuration file for Centos -# Status: this is a work in progress, under test. -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. -# In particular, see -# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so 'log/access_log' -# with ServerRoot set to '/www' will be interpreted by the -# server as '/www/log/access_log', where as '/log/access_log' will be -# interpreted as '/log/access_log'. - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# -ServerRoot "/etc/httpd" - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the <VirtualHost> -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 80 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -Include conf.modules.d/*.conf - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User apache -Group apache - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# <VirtualHost> definition. These values also provide defaults for -# any <VirtualHost> containers you may define later in the file. -# -# All of these directives may appear inside <VirtualHost> containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin root@localhost - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -#ServerName www.example.com:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# <Directory> blocks below. -# -<Directory /> - AllowOverride none - Require all denied -</Directory> - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/html" - -# -# Relax access to content within /var/www. -# -<Directory "/var/www"> - AllowOverride None - # Allow open access: - Require all granted -</Directory> - -# Further relax access to the default document root: -<Directory "/var/www/html"> - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # Options FileInfo AuthConfig Limit - # - AllowOverride None - - # - # Controls who can get stuff from this server. - # - Require all granted -</Directory> - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# -<IfModule dir_module> - DirectoryIndex index.html -</IfModule> - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# -<Files ".ht*"> - Require all denied -</Files> - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog "logs/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -<IfModule log_config_module> - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - <IfModule logio_module> - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - </IfModule> - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a <VirtualHost> - # container, they will be logged here. Contrariwise, if you *do* - # define per-<VirtualHost> access logfiles, transactions will be - # logged therein and *not* in this file. - # - #CustomLog "logs/access_log" common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - CustomLog "logs/access_log" combined -</IfModule> - -<IfModule alias_module> - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a <Directory> section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" - -</IfModule> - -# -# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# -<Directory "/var/www/cgi-bin"> - AllowOverride None - Options None - Require all granted -</Directory> - -<IfModule mime_module> - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig /etc/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - AddType text/html .shtml - AddOutputFilter INCLUDES .shtml -</IfModule> - -# -# Specify a default charset for all content served; this enables -# interpretation of all content as UTF-8 by default. To use the -# default browser choice (ISO-8859-1), or to allow the META tags -# in HTML content to override this choice, comment out this -# directive: -# -AddDefaultCharset UTF-8 - -<IfModule mime_magic_module> - # - # The mod_mime_magic module allows the server to use various hints from the - # contents of the file itself to determine its type. The MIMEMagicFile - # directive tells the module where the hint definitions are located. - # - MIMEMagicFile conf/magic -</IfModule> - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults if commented: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -EnableSendfile on - -# Supplemental configuration -# -# Load config files in the "/etc/httpd/conf.d" directory, if any. -IncludeOptional conf.d/*.conf |