diff options
Diffstat (limited to 'docs/arm')
| -rw-r--r-- | docs/arm/data_plane_sriov_pf_deployment.rst | 327 | ||||
| -rw-r--r-- | docs/arm/index.rst | 5 |
2 files changed, 330 insertions, 2 deletions
diff --git a/docs/arm/data_plane_sriov_pf_deployment.rst b/docs/arm/data_plane_sriov_pf_deployment.rst new file mode 100644 index 0000000..7cbd4d7 --- /dev/null +++ b/docs/arm/data_plane_sriov_pf_deployment.rst @@ -0,0 +1,327 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Arm Limited. + + + +=============================================== +SRIOV CNI with PF Mode Deployment on Arm Server +=============================================== + +Abstract +======== + +This document gives a brief introduction on how to deploy SRIOV CNI with PF mode for data plane. + +Introduction +============ +.. _sriov_cni: https://github.com/hustcat/sriov-cni +.. _Flannel: https://github.com/coreos/flannel +.. _Multus: https://github.com/Intel-Corp/multus-cni +.. _cni: https://github.com/containernetworking/cni +.. _kubeadm: https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/ +.. _k8s-crd: https://kubernetes.io/docs/concepts/api-extension/custom-resources/ +.. _arm64: https://github.com/kubernetes/website/pull/6511 +.. _files: https://github.com/kubernetes/website/pull/6511/files + + +As we know, in some cases we need to deploy multiple network interfaces +with data-plane acceration for single Pod. +Typically, in production area(5G, Edge computing), +one interface we used for control plane, it usually will be flannel. +For data plane, sriov cni + DPDK has the best throughput and the lowest lantency. +In this case, I will introduce sriov cni with PF mode firstly. +SRIOV with PF mode is always used in Edge computing. +Because sriov NIC is not so common on Edge computing. +And also PF mode is used as vFirewall, vPorxy in data center. + +NIC with SR-IOV capabilities works by introducing the idea of physical functions (PFs) +and virtual functions (VFs). +In general, PF is used by host. +Each VFs can be treated as a separate physical NIC and assigned to one container, +and configured with separate MAC, VLAN and IP, etc. +If we want the best networking performance for Pods, this should be the best solution. + +For demo purpose, I suggest that we use Kubeadm to deploy a Kubernetes cluster firstly. +Then I will give out a typical deployment scenario with SRIOV data plane interface added. + + +Use Case Architecture +===================== + +Kubelet is responsible for establishing the network interfaces for each pod; +it does this by invoking its configured CNI plugin. +When Multus is invoked, it recovers pod annotations related to Multus, +in turn, then it uses these annotations to recover a Kubernetes custom resource definition (CRD), +which is an object that informs which plugins to invoke +and the configuration needing to be passed to them. + +Basic Information about Environment +=================================== + +Cluster Info + +In this case, we deploy master and slave as one node. +Suppose it to be: 192.168.1.2 + +In 192.168.1.2, 2 NIC as required. +Suppose it to be: eth0, eth1, eth0 is used to be controle plane, and eth1 is used to be data plane. + +Deploy Kubernetes +----------------- +Please see link(https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/) as reference. + + +Rbac Added (optional) +--------------------- +Please make sure that rbac was added for Kubernetes cluster. +here we name it as rbac.yaml: + +:: + apiVersion: rbac.authorization.k8s.io/v1beta1 + kind: ClusterRoleBinding + metadata: + name: fabric8-rbac + subjects: + - kind: ServiceAccount + # Reference to upper's `metadata.name` + name: default + # Reference to upper's `metadata.namespace` + namespace: default + roleRef: + kind: ClusterRole + name: cluster-admin + apiGroup: rbac.authorization.k8s.io + +command: + +:: + kubectl create -f rbac.yaml + +Creat CRD +--------- +Please make sure that CRD was added for Kubernetes cluster. +Here we name it as crdnetwork.yaml: + +:: + apiVersion: apiextensions.k8s.io/v1beta1 + kind: CustomResourceDefinition + metadata: + # name must match the spec fields below, and be in the form: <plural>.<group> + name: networks.kubernetes.com + spec: + # group name to use for REST API: /apis/<group>/<version> + group: kubernetes.com + # version name to use for REST API: /apis/<group>/<version> + version: v1 + # either Namespaced or Cluster + scope: Namespaced + names: + # plural name to be used in the URL: /apis/<group>/<version>/<plural> + plural: networks + # singular name to be used as an alias on the CLI and for display + singular: network + # kind is normally the CamelCased singular type. Your resource manifests use this. + kind: Network + # shortNames allow shorter string to match your resource on the CLI + shortNames: + - net + +command: + +:: + kubectl create -f crdnetwork.yaml + +Create Flannel-network for Control Plane +---------------------------------------- +Create flannel network as control plane. +Here we name it as flannel-network.yaml: + +:: + apiVersion: "kubernetes.com/v1" + kind: Network + metadata: + name: flannel-conf + plugin: flannel + args: '[ + { + "masterplugin": true, + "delegate": { + "isDefaultGateway": true + } + } + ]' + +command: + +:: + kubectl create -f flannel-network.yaml + +Create Sriov-network for Data Plane +----------------------------------- +Create sriov network with PF mode as data plane. +Here we name it as sriov-network.yaml: + +:: + apiVersion: "kubernetes.com/v1" + kind: Network + metadata: + name: sriov-conf + plugin: sriov + args: '[ + { + "master": "eth1", + "pfOnly": true, + "ipam": { + "type": "host-local", + "subnet": "192.168.123.0/24", + "rangeStart": "192.168.123.2", + "rangeEnd": "192.168.123.10", + "routes": [ + { "dst": "0.0.0.0/0" } + ], + "gateway": "192.168.123.1" + } + } + ]' + +command: + +:: + kubectl create -f sriov-network.yaml + +CNI Installation +================ +.. _CNI: https://github.com/containernetworking/plugins +Firstly, we should deploy all CNI plugins. The build process is following: + + +:: + git clone https://github.com/containernetworking/plugins.git + cd plugins + ./build.sh + cp bin/* /opt/cni/bin + +.. _Multus: https://github.com/Intel-Corp/multus-cni + +To deploy control plane and data plane interfaces, besides the Flannel CNI and SRIOV CNI, +we need to deploy the Multus_. The build process of it is as: + +:: + git clone https://github.com/Intel-Corp/multus-cni.git + cd multus-cni + ./build + cp bin/multus /opt/cni/bin + +To use the Multus_ CNI, +we should put the Multus CNI binary to /opt/cni/bin/ where the Flannel CNI and SRIOV +CNIs are put. + +.. _SRIOV: https://github.com/hustcat/sriov-cni +The build process of it is as: + +:: + git clone https://github.com/hustcat/sriov-cni.git + cd sriov-cni + ./build + cp bin/* /opt/cni/bin + +CNI Configuration +================= +The following multus CNI configuration is located in /etc/cni/net.d/, here we name it +as multus-cni.conf: + +:: + { + "name": "minion-cni-network", + "type": "multus", + "kubeconfig": "/etc/kubernetes/admin.conf", + "delegates": [{ + "type": "flannel", + "masterplugin": true, + "delegate": { + "isDefaultGateway": true + } + }] + } + +command: + +:: + step1, remove all files in /etc/cni/net.d/ + rm /etc/cni/net.d/* -rf + + step2, copy /etc/kubernetes/admin.conf into each nodes. + + step3, copy multus-cni.conf into /etc/cni/net.d/ + + step4, restart kubelet + systemctl restart kubelet + + +Configuring Pod with Control Plane and Data Plane +================================================= + +1, Save the below following YAML to pod-sriov.yaml. +In this case flannle-conf network object act as the primary network. + +:: + apiVersion: v1 + kind: Pod + metadata: + name: pod-sriov + annotations: + networks: '[ + { "name": "flannel-conf" }, + { "name": "sriov-conf" } + ]' + spec: # specification of the pod's contents + containers: + - name: pod-sriov + image: "busybox" + command: ["top"] + stdin: true + tty: true + +2, Create Pod + +:: + command: + kubectl create -f pod-sriov.yaml + +3, Get the details of the running pod from the master + +:: + # kubectl get pods + NAME READY STATUS RESTARTS AGE + pod-sriov 1/1 Running 0 30s + +Verifying Pod Network +===================== + +:: + # kubectl exec pod-sriov -- ip a + 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever + inet6 ::1/128 scope host + valid_lft forever preferred_lft forever + 3: eth0@if124: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue + link/ether 0a:58:0a:e9:40:2a brd ff:ff:ff:ff:ff:ff + inet 10.233.64.42/24 scope global eth0 + valid_lft forever preferred_lft forever + inet6 fe80::8e6:32ff:fed3:7645/64 scope link + valid_lft forever preferred_lft forever + 4: net0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 + link/ether 52:54:00:d4:d2:e5 brd ff:ff:ff:ff:ff:ff + inet 192.168.123.2/24 scope global net0 + valid_lft forever preferred_lft forever + inet6 fe80::5054:ff:fed4:d2e5/64 scope link + valid_lft forever preferred_lft forever + +Contacts +======== + +Bin Lu: bin.lu@arm.com diff --git a/docs/arm/index.rst b/docs/arm/index.rst index eebea47..cb19b32 100644 --- a/docs/arm/index.rst +++ b/docs/arm/index.rst @@ -8,8 +8,8 @@ Container4NFV on Arm :Project: Container4NFV, https://wiki.opnfv.org/display/container4nfv -:Editors: Trevor Tao (Arm Ltd) -:Authors: Trevor Tao (Arm Ltd) +:Editors: Trevor Tao (Arm Ltd) Bin Lu (Arm Ltd) +:Authors: Trevor Tao (Arm Ltd) Bin Lu (Arm Ltd) :Abstract: This document gives a brief introduction on Arm's work status, strategy and possible roadmap for Container4NFV on arm64 server platform. The target of the description @@ -23,3 +23,4 @@ Container4NFV on Arm container4nfv_on_arm multi_flannel_intfs_deployment + data_plane_sriov_pf_deployment |