1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
Compass4nfv configuration
=========================
This document describes providing guidelines on how to install and
configure the Danube release of OPNFV when using Compass as a
deployment tool including required software and hardware
configurations.
Installation and configuration of host OS, OpenStack, OpenDaylight,
ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
nodes.
The audience of this document is assumed to have good knowledge in
networking and Unix/Linux administration.
Preconditions
-------------
Before starting the installation of the Euphrates release of OPNFV,
some planning must be done.
Retrieving the installation tarball
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, The installation tarball is needed for deploying your OPNFV
environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
and so on.
The stable release tarball can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
The daily build tarball can be retrieved via OPNFV artifacts repository:
http://artifacts.opnfv.org/compass4nfv.html
NOTE: Search the keyword "compass4nfv/Euphrates" to locate the tarball.
E.g.
compass4nfv/euphrates/opnfv-2017-03-29_08-55-09.tar.gz
The name of tarball includes the time of tarball building, you can get the daily
tarball according the building time.
The git url and sha1 of Compass4nfv are recorded in properties files,
According these, the corresponding deployment scripts can be retrieved.
Getting the deployment scripts
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To retrieve the repository of Compass4nfv on Jumphost use the following command:
- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
To get stable/euphrates release, you can use the following command:
- git checkout Euphrates.1.0
Setup Requirements
------------------
If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
1 for compute.
Jumphost Requirements
~~~~~~~~~~~~~~~~~~~~~
The Jumphost requirements are outlined below:
1. Ubuntu 14.04 (Pre-installed).
2. Root access.
3. libvirt virtualization support.
4. Minimum 2 NICs.
- PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
- IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
- External Network (Optional: Internet access)
5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deployment needs 1 TB Hard Disk)
Bare Metal Node Requirements
----------------------------
Bare Metal nodes require:
1. IPMI enabled on OOB interface for power control.
2. BIOS boot priority should be PXE first then local hard disk.
3. Minimum 3 NICs.
- PXE installation Network (Broadcasting PXE request)
- IPMI Network (Receiving IPMI command from Jumphost)
- External Network (OpenStack mgmt/external/storage/tenant network)
Network Requirements
--------------------
Network requirements include:
1. No DHCP or TFTP server running on networks used by OPNFV.
2. 2-6 separate networks with connectivity between Jumphost and nodes.
- PXE installation Network
- IPMI Network
- Openstack mgmt Network*
- Openstack external Network*
- Openstack tenant Network*
- Openstack storage Network*
3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
4. External network has Internet access, meaning a gateway and DNS availability.
**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
**NIC(Reconfigurated in network.yml).**
Execution Requirements (Bare Metal Only)
----------------------------------------
In order to execute a deployment, one must gather the following information:
1. IPMI IP addresses of the nodes.
2. IPMI login information for the nodes (user/pass).
3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
Configurations
---------------
There are three configuration files a user needs to modify for a cluster deployment.
``network_cfg.yaml`` for openstack networks on hosts.
``dha file`` for host role, IPMI credential and host nic idenfitication (MAC address).
``deploy.sh`` for os and openstack version.
|
