summaryrefslogtreecommitdiffstats
path: root/util/docker-compose/roles/compass/files
diff options
context:
space:
mode:
Diffstat (limited to 'util/docker-compose/roles/compass/files')
-rwxr-xr-xutil/docker-compose/roles/compass/files/pipework443
-rwxr-xr-xutil/docker-compose/roles/compass/files/prepare_ansible.sh8
-rwxr-xr-xutil/docker-compose/roles/compass/files/preseed_post_anamon80
-rwxr-xr-xutil/docker-compose/roles/compass/files/switch_list.conf3
-rwxr-xr-xutil/docker-compose/roles/compass/files/up_containers.sh3
5 files changed, 537 insertions, 0 deletions
diff --git a/util/docker-compose/roles/compass/files/pipework b/util/docker-compose/roles/compass/files/pipework
new file mode 100755
index 00000000..6d796fc4
--- /dev/null
+++ b/util/docker-compose/roles/compass/files/pipework
@@ -0,0 +1,443 @@
+#!/bin/sh
+# This script is jpetazzo's work. The only reason for its
+# existence in the repo is to saving a working copy in case
+# the original one gets deleted.
+#
+# This code should (try to) follow Google's Shell Style Guide
+# (https://google-styleguide.googlecode.com/svn/trunk/shell.xml)
+set -e
+
+case "$1" in
+ --wait)
+ WAIT=1
+ ;;
+ --direct-phys)
+ DIRECT_PHYS=1
+ shift
+ ;;
+esac
+
+IFNAME=$1
+
+# default value set further down if not set here
+CONTAINER_IFNAME=
+if [ "$2" = "-i" ]; then
+ CONTAINER_IFNAME=$3
+ shift 2
+fi
+
+if [ "$2" = "-l" ]; then
+ LOCAL_IFNAME=$3
+ shift 2
+fi
+
+#inet or inet6
+FAMILY_FLAG="-4"
+if [ "$2" = "-a" ]; then
+ FAMILY_FLAG="-$3"
+ shift 2
+fi
+
+GUESTNAME=$2
+IPADDR=$3
+MACADDR=$4
+
+case "$MACADDR" in
+ *@*)
+ VLAN="${MACADDR#*@}"
+ VLAN="${VLAN%%@*}"
+ MACADDR="${MACADDR%%@*}"
+ ;;
+ *)
+ VLAN=
+ ;;
+esac
+
+# did they ask to generate a custom MACADDR?
+# generate the unique string
+case "$MACADDR" in
+ U:*)
+ macunique="${MACADDR#*:}"
+ # now generate a 48-bit hash string from $macunique
+ MACADDR=$(echo $macunique|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/')
+ ;;
+esac
+
+
+[ "$IPADDR" ] || [ "$WAIT" ] || {
+ echo "Syntax:"
+ echo "pipework <hostinterface> [-i containerinterface] [-l localinterfacename] [-a addressfamily] <guest> <ipaddr>/<subnet>[@default_gateway] [macaddr][@vlan]"
+ echo "pipework <hostinterface> [-i containerinterface] [-l localinterfacename] <guest> dhcp [macaddr][@vlan]"
+ echo "pipework route <guest> <route_command>"
+ echo "pipework --wait [-i containerinterface]"
+ exit 1
+}
+
+# Succeed if the given utility is installed. Fail otherwise.
+# For explanations about `which` vs `type` vs `command`, see:
+# http://stackoverflow.com/questions/592620/check-if-a-program-exists-from-a-bash-script/677212#677212
+# (Thanks to @chenhanxiao for pointing this out!)
+installed () {
+ command -v "$1" >/dev/null 2>&1
+}
+
+# Google Styleguide says error messages should go to standard error.
+warn () {
+ echo "$@" >&2
+}
+die () {
+ status="$1"
+ shift
+ warn "$@"
+ exit "$status"
+}
+
+# First step: determine type of first argument (bridge, physical interface...),
+# Unless "--wait" is set (then skip the whole section)
+if [ -z "$WAIT" ]; then
+ if [ -d "/sys/class/net/$IFNAME" ]
+ then
+ if [ -d "/sys/class/net/$IFNAME/bridge" ]; then
+ IFTYPE=bridge
+ BRTYPE=linux
+ elif installed ovs-vsctl && ovs-vsctl list-br|grep -q "^${IFNAME}$"; then
+ IFTYPE=bridge
+ BRTYPE=openvswitch
+ elif [ "$(cat "/sys/class/net/$IFNAME/type")" -eq 32 ]; then # InfiniBand IPoIB interface type 32
+ IFTYPE=ipoib
+ # The IPoIB kernel module is fussy, set device name to ib0 if not overridden
+ CONTAINER_IFNAME=${CONTAINER_IFNAME:-ib0}
+ PKEY=$VLAN
+ else IFTYPE=phys
+ fi
+ else
+ case "$IFNAME" in
+ br*)
+ IFTYPE=bridge
+ BRTYPE=linux
+ ;;
+ ovs*)
+ if ! installed ovs-vsctl; then
+ die 1 "Need OVS installed on the system to create an ovs bridge"
+ fi
+ IFTYPE=bridge
+ BRTYPE=openvswitch
+ ;;
+ route*)
+ IFTYPE=route
+ ;;
+ dummy*)
+ IFTYPE=dummy
+ ;;
+ *) die 1 "I do not know how to setup interface $IFNAME." ;;
+ esac
+ fi
+fi
+
+# Set the default container interface name to eth1 if not already set
+CONTAINER_IFNAME=${CONTAINER_IFNAME:-eth1}
+
+[ "$WAIT" ] && {
+ while true; do
+ # This first method works even without `ip` or `ifconfig` installed,
+ # but doesn't work on older kernels (e.g. CentOS 6.X). See #128.
+ grep -q '^1$' "/sys/class/net/$CONTAINER_IFNAME/carrier" && break
+ # This method hopefully works on those older kernels.
+ ip link ls dev "$CONTAINER_IFNAME" && break
+ sleep 1
+ done > /dev/null 2>&1
+ exit 0
+}
+
+[ "$IFTYPE" = bridge ] && [ "$BRTYPE" = linux ] && [ "$VLAN" ] && {
+ die 1 "VLAN configuration currently unsupported for Linux bridge."
+}
+
+[ "$IFTYPE" = ipoib ] && [ "$MACADDR" ] && {
+ die 1 "MACADDR configuration unsupported for IPoIB interfaces."
+}
+
+# Second step: find the guest (for now, we only support LXC containers)
+while read _ mnt fstype options _; do
+ [ "$fstype" != "cgroup" ] && continue
+ echo "$options" | grep -qw devices || continue
+ CGROUPMNT=$mnt
+done < /proc/mounts
+
+[ "$CGROUPMNT" ] || {
+ die 1 "Could not locate cgroup mount point."
+}
+
+# Try to find a cgroup matching exactly the provided name.
+N=$(find "$CGROUPMNT" -name "$GUESTNAME" | wc -l)
+case "$N" in
+ 0)
+ # If we didn't find anything, try to lookup the container with Docker.
+ if installed docker; then
+ RETRIES=3
+ while [ "$RETRIES" -gt 0 ]; do
+ DOCKERPID=$(docker inspect --format='{{ .State.Pid }}' "$GUESTNAME")
+ [ "$DOCKERPID" != 0 ] && break
+ sleep 1
+ RETRIES=$((RETRIES - 1))
+ done
+
+ [ "$DOCKERPID" = 0 ] && {
+ die 1 "Docker inspect returned invalid PID 0"
+ }
+
+ [ "$DOCKERPID" = "<no value>" ] && {
+ die 1 "Container $GUESTNAME not found, and unknown to Docker."
+ }
+ else
+ die 1 "Container $GUESTNAME not found, and Docker not installed."
+ fi
+ ;;
+ 1) true ;;
+ *) die 1 "Found more than one container matching $GUESTNAME." ;;
+esac
+
+# only check IPADDR if we are not in a route mode
+[ "$IFTYPE" != route ] && {
+ case "$IPADDR" in
+ # Let's check first if the user asked for DHCP allocation.
+ dhcp|dhcp:*)
+ # Use Docker-specific strategy to run the DHCP client
+ # from the busybox image, in the network namespace of
+ # the container.
+ if ! [ "$DOCKERPID" ]; then
+ warn "You asked for a Docker-specific DHCP method."
+ warn "However, $GUESTNAME doesn't seem to be a Docker container."
+ warn "Try to replace 'dhcp' with another option?"
+ die 1 "Aborting."
+ fi
+ DHCP_CLIENT=${IPADDR%%:*}
+ ;;
+ udhcpc|udhcpc:*|udhcpc-f|udhcpc-f:*|dhcpcd|dhcpcd:*|dhclient|dhclient:*|dhclient-f|dhclient-f:*)
+ DHCP_CLIENT=${IPADDR%%:*}
+ # did they ask for the client to remain?
+ DHCP_FOREGROUND=
+ [ "${DHCP_CLIENT: -2}" = '-f' ] && {
+ DHCP_FOREGROUND=true
+ }
+ DHCP_CLIENT=${DHCP_CLIENT%-f}
+ if ! installed "$DHCP_CLIENT"; then
+ die 1 "You asked for DHCP client $DHCP_CLIENT, but I can't find it."
+ fi
+ ;;
+ # Alright, no DHCP? Then let's see if we have a subnet *and* gateway.
+ */*@*)
+ GATEWAY="${IPADDR#*@}" GATEWAY="${GATEWAY%%@*}"
+ IPADDR="${IPADDR%%@*}"
+ ;;
+ # No gateway? We need at least a subnet, anyway!
+ */*) : ;;
+ # ... No? Then stop right here.
+ *)
+ warn "The IP address should include a netmask."
+ die 1 "Maybe you meant $IPADDR/24 ?"
+ ;;
+ esac
+}
+
+# If a DHCP method was specified, extract the DHCP options.
+if [ "$DHCP_CLIENT" ]; then
+ case "$IPADDR" in
+ *:*) DHCP_OPTIONS="${IPADDR#*:}" ;;
+ esac
+fi
+
+if [ "$DOCKERPID" ]; then
+ NSPID=$DOCKERPID
+else
+ NSPID=$(head -n 1 "$(find "$CGROUPMNT" -name "$GUESTNAME" | head -n 1)/tasks")
+ [ "$NSPID" ] || {
+ # it is an alternative way to get the pid
+ NSPID=$(lxc-info -n "$GUESTNAME" | grep PID | grep -Eo '[0-9]+')
+ [ "$NSPID" ] || {
+ die 1 "Could not find a process inside container $GUESTNAME."
+ }
+ }
+fi
+
+# Check if an incompatible VLAN device already exists
+[ "$IFTYPE" = phys ] && [ "$VLAN" ] && [ -d "/sys/class/net/$IFNAME.VLAN" ] && {
+ ip -d link show "$IFNAME.$VLAN" | grep -q "vlan.*id $VLAN" || {
+ die 1 "$IFNAME.VLAN already exists but is not a VLAN device for tag $VLAN"
+ }
+}
+
+[ ! -d /var/run/netns ] && mkdir -p /var/run/netns
+rm -f "/var/run/netns/$NSPID"
+ln -s "/proc/$NSPID/ns/net" "/var/run/netns/$NSPID"
+
+# Check if we need to create a bridge.
+[ "$IFTYPE" = bridge ] && [ ! -d "/sys/class/net/$IFNAME" ] && {
+ [ "$BRTYPE" = linux ] && {
+ (ip link add dev "$IFNAME" type bridge > /dev/null 2>&1) || (brctl addbr "$IFNAME")
+ ip link set "$IFNAME" up
+ }
+ [ "$BRTYPE" = openvswitch ] && {
+ ovs-vsctl add-br "$IFNAME"
+ }
+}
+
+[ "$IFTYPE" != "route" ] && [ "$IFTYPE" != "dummy" ] && MTU=$(ip link show "$IFNAME" | awk '{print $5}')
+
+# If it's a bridge, we need to create a veth pair
+[ "$IFTYPE" = bridge ] && {
+ if [ -z "$LOCAL_IFNAME" ]; then
+ LOCAL_IFNAME="v${CONTAINER_IFNAME}pl${NSPID}"
+ fi
+ GUEST_IFNAME="v${CONTAINER_IFNAME}pg${NSPID}"
+ # Does the link already exist?
+ if ip link show "$LOCAL_IFNAME" >/dev/null 2>&1; then
+ # link exists, is it in use?
+ if ip link show "$LOCAL_IFNAME" up | grep -q "UP"; then
+ echo "Link $LOCAL_IFNAME exists and is up"
+ exit 1
+ fi
+ # delete the link so we can re-add it afterwards
+ ip link del "$LOCAL_IFNAME"
+ fi
+ ip link add name "$LOCAL_IFNAME" mtu "$MTU" type veth peer name "$GUEST_IFNAME" mtu "$MTU"
+ case "$BRTYPE" in
+ linux)
+ (ip link set "$LOCAL_IFNAME" master "$IFNAME" > /dev/null 2>&1) || (brctl addif "$IFNAME" "$LOCAL_IFNAME")
+ ;;
+ openvswitch)
+ if ! ovs-vsctl list-ports "$IFNAME" | grep -q "^${LOCAL_IFNAME}$"; then
+ ovs-vsctl add-port "$IFNAME" "$LOCAL_IFNAME" ${VLAN:+tag="$VLAN"}
+ fi
+ ;;
+ esac
+ ip link set "$LOCAL_IFNAME" up
+}
+
+# If it's a physical interface, create a macvlan subinterface
+[ "$IFTYPE" = phys ] && {
+ [ "$VLAN" ] && {
+ [ ! -d "/sys/class/net/${IFNAME}.${VLAN}" ] && {
+ ip link add link "$IFNAME" name "$IFNAME.$VLAN" mtu "$MTU" type vlan id "$VLAN"
+ }
+ ip link set "$IFNAME" up
+ IFNAME=$IFNAME.$VLAN
+ }
+
+ if [ ! -z "$DIRECT_PHYS" ]; then
+ GUEST_IFNAME=$IFNAME
+ else
+ GUEST_IFNAME=ph$NSPID$CONTAINER_IFNAME
+ ip link add link "$IFNAME" dev "$GUEST_IFNAME" mtu "$MTU" type macvlan mode bridge
+ fi
+
+ ip link set "$IFNAME" up
+}
+
+# If it's an IPoIB interface, create a virtual IPoIB interface (the IPoIB
+# equivalent of a macvlan device)
+#
+# Note: no macvlan subinterface nor Ethernet bridge can be created on top of an
+# IPoIB interface. InfiniBand is not Ethernet. IPoIB is an IP layer on top of
+# InfiniBand, without an intermediate Ethernet layer.
+[ "$IFTYPE" = ipoib ] && {
+ GUEST_IFNAME="${IFNAME}.${NSPID}"
+
+ # If a partition key is provided, use it
+ [ "$PKEY" ] && {
+ GUEST_IFNAME="${IFNAME}.${PKEY}.${NSPID}"
+ PKEY="pkey 0x$PKEY"
+ }
+
+ ip link add link "$IFNAME" name "$GUEST_IFNAME" type ipoib $PKEY
+ ip link set "$IFNAME" up
+}
+
+# If its a dummy interface, create a dummy interface.
+[ "$IFTYPE" = dummy ] && {
+ GUEST_IFNAME=du$NSPID$CONTAINER_IFNAME
+ ip link add dev "$GUEST_IFNAME" type dummy
+}
+
+# If the `route` command was specified ...
+if [ "$IFTYPE" = route ]; then
+ # ... discard the first two arguments and pass the rest to the route command.
+ shift 2
+ ip netns exec "$NSPID" ip route "$@"
+else
+ # Otherwise, run normally.
+ ip link set "$GUEST_IFNAME" netns "$NSPID"
+ ip netns exec "$NSPID" ip link set "$GUEST_IFNAME" name "$CONTAINER_IFNAME"
+ [ "$MACADDR" ] && ip netns exec "$NSPID" ip link set dev "$CONTAINER_IFNAME" address "$MACADDR"
+
+ # When using any of the DHCP methods, we start a DHCP client in the
+ # network namespace of the container. With the 'dhcp' method, the
+ # client used is taken from the Docker busybox image (therefore
+ # requiring no specific client installed on the host). Other methods
+ # use a locally installed client.
+ case "$DHCP_CLIENT" in
+ dhcp)
+ docker run -d --net container:$GUESTNAME --cap-add NET_ADMIN \
+ busybox udhcpc -i "$CONTAINER_IFNAME" -x "hostname:$GUESTNAME" \
+ $DHCP_OPTIONS \
+ >/dev/null
+ ;;
+ udhcpc)
+ DHCP_Q="-q"
+ [ "$DHCP_FOREGROUND" ] && {
+ DHCP_OPTIONS="$DHCP_OPTIONS -f"
+ }
+ ip netns exec "$NSPID" "$DHCP_CLIENT" -qi "$CONTAINER_IFNAME" \
+ -x "hostname:$GUESTNAME" \
+ -p "/var/run/udhcpc.$GUESTNAME.pid" \
+ $DHCP_OPTIONS
+ [ ! "$DHCP_FOREGROUND" ] && {
+ rm "/var/run/udhcpc.$GUESTNAME.pid"
+ }
+ ;;
+ dhclient)
+ ip netns exec "$NSPID" "$DHCP_CLIENT" "$CONTAINER_IFNAME" \
+ -pf "/var/run/dhclient.$GUESTNAME.pid" \
+ -lf "/etc/dhclient/dhclient.$GUESTNAME.leases" \
+ $DHCP_OPTIONS
+ # kill dhclient after get ip address to prevent device be used after container close
+ [ ! "$DHCP_FOREGROUND" ] && {
+ kill "$(cat "/var/run/dhclient.$GUESTNAME.pid")"
+ rm "/var/run/dhclient.$GUESTNAME.pid"
+ }
+ ;;
+ dhcpcd)
+ ip netns exec "$NSPID" "$DHCP_CLIENT" -q "$CONTAINER_IFNAME" -h "$GUESTNAME"
+ ;;
+ "")
+ if installed ipcalc; then
+ eval $(ipcalc -b $IPADDR)
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" addr add "$IPADDR" brd "$BROADCAST" dev "$CONTAINER_IFNAME"
+ else
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" addr add "$IPADDR" dev "$CONTAINER_IFNAME"
+ fi
+
+ [ "$GATEWAY" ] && {
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" route delete default >/dev/null 2>&1 && true
+ }
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" link set "$CONTAINER_IFNAME" up
+ [ "$GATEWAY" ] && {
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" route get "$GATEWAY" >/dev/null 2>&1 || \
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" route add "$GATEWAY/32" dev "$CONTAINER_IFNAME"
+ ip netns exec "$NSPID" ip "$FAMILY_FLAG" route replace default via "$GATEWAY" dev "$CONTAINER_IFNAME"
+ }
+ ;;
+ esac
+
+ # Give our ARP neighbors a nudge about the new interface
+ if installed arping; then
+ IPADDR=$(echo "$IPADDR" | cut -d/ -f1)
+ ip netns exec "$NSPID" arping -c 1 -A -I "$CONTAINER_IFNAME" "$IPADDR" > /dev/null 2>&1 || true
+ else
+ echo "Warning: arping not found; interface may not be immediately reachable"
+ fi
+fi
+# Remove NSPID to avoid `ip netns` catch it.
+rm -f "/var/run/netns/$NSPID"
+
+# vim: set tabstop=2 shiftwidth=2 softtabstop=2 expandtab :
diff --git a/util/docker-compose/roles/compass/files/prepare_ansible.sh b/util/docker-compose/roles/compass/files/prepare_ansible.sh
new file mode 100755
index 00000000..031333c8
--- /dev/null
+++ b/util/docker-compose/roles/compass/files/prepare_ansible.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+
+for i in `ls /root/compass4nfv/deploy/adapters/ansible | grep "openstack_"`; do
+ mkdir -p /root/docker_compose/ansible/$i
+ cp -rf /root/compass4nfv/deploy/adapters/ansible/openstack/* /root/docker_compose/ansible/$i
+ cp -rf /root/compass4nfv/deploy/adapters/ansible/$i /root/docker_compose/ansible/
+done
+cp -rf /root/compass4nfv/deploy/adapters/ansible/roles /root/docker_compose/ansible/
diff --git a/util/docker-compose/roles/compass/files/preseed_post_anamon b/util/docker-compose/roles/compass/files/preseed_post_anamon
new file mode 100755
index 00000000..b4c85253
--- /dev/null
+++ b/util/docker-compose/roles/compass/files/preseed_post_anamon
@@ -0,0 +1,80 @@
+#if $str($getVar('anamon_enabled','')) == "1"
+
+## install anamon script
+ #if $getVar("compass_server", "") != ""
+wget -O /usr/local/sbin/anamon "http://$compass_server:$http_port/cobbler/aux/anamon"
+ #else
+wget -O /usr/local/sbin/anamon "http://$server:$http_port/cobbler/aux/anamon"
+ #end if
+## install anamon system service
+cat << EOF > /etc/init.d/anamon.init
+#raw
+#!/bin/bash
+## BEGIN INIT INFO
+# Provides: anamon.init
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 4 6
+# Required-Start: $network
+# Short-Description: Starts the cobbler anamon boot notification program
+# Description: anamon runs the first time a machine is booted after
+# installation.
+## END INIT INFO
+
+#
+# anamon.init: Starts the cobbler post-install boot notification program
+#
+# chkconfig: 35 95 95
+#
+# description: anamon runs the first time a machine is booted after
+# installation.
+#
+#end raw
+cd /var/log/installer
+gunzip initial-status.gz
+cd -
+#if $getVar("compass_server","") != ""
+/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $compass_server --port $http_port --exit
+#else
+/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $server --port $http_port --exit
+#end if
+update-rc.d -f anamon remove
+mv /etc/init.d/anamon.init /tmp/anamon.init
+EOF
+
+## adjust permissions
+chmod 755 /etc/init.d/anamon.init /usr/local/sbin/anamon
+test -d /selinux && restorecon /etc/init.d/anamon.init /usr/local/sbin/anamon
+
+## enable the script
+update-rc.d anamon.init defaults 95 95
+#end if
+
+## place start-up script for updating os state
+#if $getVar('compass_server', '') != ""
+ #set srv = $getVar('compass_server','')
+#else
+ #set srv = $getVar('server','')
+#end if
+cat << EOF > /etc/init.d/set_state
+#raw
+#!/bin/bash
+# Provides: set_state
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 4 6
+# Required-Start: $network $ssh
+# Short-Description: Notifies the os installation is finished
+# Description: set_state runs the first time a machine is booted after
+# installation.
+#end raw
+wget -O /tmp/os_state --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv:5050/api/hosts/${host_id}/state_internal"
+update-rc.d -f set_state remove
+mv /etc/init.d/set_state /tmp/set_state
+EOF
+
+## adjust permissions
+chmod 755 /etc/init.d/set_state
+test -d /selinux && restorecon /etc/init.d/set_state
+
+update-rc.d set_state defaults 99 99
+
+echo "compass_server=$server" >> /etc/compass.conf
diff --git a/util/docker-compose/roles/compass/files/switch_list.conf b/util/docker-compose/roles/compass/files/switch_list.conf
new file mode 100755
index 00000000..21c46c0a
--- /dev/null
+++ b/util/docker-compose/roles/compass/files/switch_list.conf
@@ -0,0 +1,3 @@
+SWITCH_LIST = [
+ '127.0.0.1'
+]
diff --git a/util/docker-compose/roles/compass/files/up_containers.sh b/util/docker-compose/roles/compass/files/up_containers.sh
new file mode 100755
index 00000000..9aca591a
--- /dev/null
+++ b/util/docker-compose/roles/compass/files/up_containers.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+cd /root/docker_compose
+docker-compose up