diff options
Diffstat (limited to 'util/docker-compose/roles/compass/files')
5 files changed, 537 insertions, 0 deletions
diff --git a/util/docker-compose/roles/compass/files/pipework b/util/docker-compose/roles/compass/files/pipework new file mode 100755 index 00000000..6d796fc4 --- /dev/null +++ b/util/docker-compose/roles/compass/files/pipework @@ -0,0 +1,443 @@ +#!/bin/sh +# This script is jpetazzo's work. The only reason for its +# existence in the repo is to saving a working copy in case +# the original one gets deleted. +# +# This code should (try to) follow Google's Shell Style Guide +# (https://google-styleguide.googlecode.com/svn/trunk/shell.xml) +set -e + +case "$1" in + --wait) + WAIT=1 + ;; + --direct-phys) + DIRECT_PHYS=1 + shift + ;; +esac + +IFNAME=$1 + +# default value set further down if not set here +CONTAINER_IFNAME= +if [ "$2" = "-i" ]; then + CONTAINER_IFNAME=$3 + shift 2 +fi + +if [ "$2" = "-l" ]; then + LOCAL_IFNAME=$3 + shift 2 +fi + +#inet or inet6 +FAMILY_FLAG="-4" +if [ "$2" = "-a" ]; then + FAMILY_FLAG="-$3" + shift 2 +fi + +GUESTNAME=$2 +IPADDR=$3 +MACADDR=$4 + +case "$MACADDR" in + *@*) + VLAN="${MACADDR#*@}" + VLAN="${VLAN%%@*}" + MACADDR="${MACADDR%%@*}" + ;; + *) + VLAN= + ;; +esac + +# did they ask to generate a custom MACADDR? +# generate the unique string +case "$MACADDR" in + U:*) + macunique="${MACADDR#*:}" + # now generate a 48-bit hash string from $macunique + MACADDR=$(echo $macunique|md5sum|sed 's/^\(..\)\(..\)\(..\)\(..\)\(..\).*$/02:\1:\2:\3:\4:\5/') + ;; +esac + + +[ "$IPADDR" ] || [ "$WAIT" ] || { + echo "Syntax:" + echo "pipework <hostinterface> [-i containerinterface] [-l localinterfacename] [-a addressfamily] <guest> <ipaddr>/<subnet>[@default_gateway] [macaddr][@vlan]" + echo "pipework <hostinterface> [-i containerinterface] [-l localinterfacename] <guest> dhcp [macaddr][@vlan]" + echo "pipework route <guest> <route_command>" + echo "pipework --wait [-i containerinterface]" + exit 1 +} + +# Succeed if the given utility is installed. Fail otherwise. +# For explanations about `which` vs `type` vs `command`, see: +# http://stackoverflow.com/questions/592620/check-if-a-program-exists-from-a-bash-script/677212#677212 +# (Thanks to @chenhanxiao for pointing this out!) +installed () { + command -v "$1" >/dev/null 2>&1 +} + +# Google Styleguide says error messages should go to standard error. +warn () { + echo "$@" >&2 +} +die () { + status="$1" + shift + warn "$@" + exit "$status" +} + +# First step: determine type of first argument (bridge, physical interface...), +# Unless "--wait" is set (then skip the whole section) +if [ -z "$WAIT" ]; then + if [ -d "/sys/class/net/$IFNAME" ] + then + if [ -d "/sys/class/net/$IFNAME/bridge" ]; then + IFTYPE=bridge + BRTYPE=linux + elif installed ovs-vsctl && ovs-vsctl list-br|grep -q "^${IFNAME}$"; then + IFTYPE=bridge + BRTYPE=openvswitch + elif [ "$(cat "/sys/class/net/$IFNAME/type")" -eq 32 ]; then # InfiniBand IPoIB interface type 32 + IFTYPE=ipoib + # The IPoIB kernel module is fussy, set device name to ib0 if not overridden + CONTAINER_IFNAME=${CONTAINER_IFNAME:-ib0} + PKEY=$VLAN + else IFTYPE=phys + fi + else + case "$IFNAME" in + br*) + IFTYPE=bridge + BRTYPE=linux + ;; + ovs*) + if ! installed ovs-vsctl; then + die 1 "Need OVS installed on the system to create an ovs bridge" + fi + IFTYPE=bridge + BRTYPE=openvswitch + ;; + route*) + IFTYPE=route + ;; + dummy*) + IFTYPE=dummy + ;; + *) die 1 "I do not know how to setup interface $IFNAME." ;; + esac + fi +fi + +# Set the default container interface name to eth1 if not already set +CONTAINER_IFNAME=${CONTAINER_IFNAME:-eth1} + +[ "$WAIT" ] && { + while true; do + # This first method works even without `ip` or `ifconfig` installed, + # but doesn't work on older kernels (e.g. CentOS 6.X). See #128. + grep -q '^1$' "/sys/class/net/$CONTAINER_IFNAME/carrier" && break + # This method hopefully works on those older kernels. + ip link ls dev "$CONTAINER_IFNAME" && break + sleep 1 + done > /dev/null 2>&1 + exit 0 +} + +[ "$IFTYPE" = bridge ] && [ "$BRTYPE" = linux ] && [ "$VLAN" ] && { + die 1 "VLAN configuration currently unsupported for Linux bridge." +} + +[ "$IFTYPE" = ipoib ] && [ "$MACADDR" ] && { + die 1 "MACADDR configuration unsupported for IPoIB interfaces." +} + +# Second step: find the guest (for now, we only support LXC containers) +while read _ mnt fstype options _; do + [ "$fstype" != "cgroup" ] && continue + echo "$options" | grep -qw devices || continue + CGROUPMNT=$mnt +done < /proc/mounts + +[ "$CGROUPMNT" ] || { + die 1 "Could not locate cgroup mount point." +} + +# Try to find a cgroup matching exactly the provided name. +N=$(find "$CGROUPMNT" -name "$GUESTNAME" | wc -l) +case "$N" in + 0) + # If we didn't find anything, try to lookup the container with Docker. + if installed docker; then + RETRIES=3 + while [ "$RETRIES" -gt 0 ]; do + DOCKERPID=$(docker inspect --format='{{ .State.Pid }}' "$GUESTNAME") + [ "$DOCKERPID" != 0 ] && break + sleep 1 + RETRIES=$((RETRIES - 1)) + done + + [ "$DOCKERPID" = 0 ] && { + die 1 "Docker inspect returned invalid PID 0" + } + + [ "$DOCKERPID" = "<no value>" ] && { + die 1 "Container $GUESTNAME not found, and unknown to Docker." + } + else + die 1 "Container $GUESTNAME not found, and Docker not installed." + fi + ;; + 1) true ;; + *) die 1 "Found more than one container matching $GUESTNAME." ;; +esac + +# only check IPADDR if we are not in a route mode +[ "$IFTYPE" != route ] && { + case "$IPADDR" in + # Let's check first if the user asked for DHCP allocation. + dhcp|dhcp:*) + # Use Docker-specific strategy to run the DHCP client + # from the busybox image, in the network namespace of + # the container. + if ! [ "$DOCKERPID" ]; then + warn "You asked for a Docker-specific DHCP method." + warn "However, $GUESTNAME doesn't seem to be a Docker container." + warn "Try to replace 'dhcp' with another option?" + die 1 "Aborting." + fi + DHCP_CLIENT=${IPADDR%%:*} + ;; + udhcpc|udhcpc:*|udhcpc-f|udhcpc-f:*|dhcpcd|dhcpcd:*|dhclient|dhclient:*|dhclient-f|dhclient-f:*) + DHCP_CLIENT=${IPADDR%%:*} + # did they ask for the client to remain? + DHCP_FOREGROUND= + [ "${DHCP_CLIENT: -2}" = '-f' ] && { + DHCP_FOREGROUND=true + } + DHCP_CLIENT=${DHCP_CLIENT%-f} + if ! installed "$DHCP_CLIENT"; then + die 1 "You asked for DHCP client $DHCP_CLIENT, but I can't find it." + fi + ;; + # Alright, no DHCP? Then let's see if we have a subnet *and* gateway. + */*@*) + GATEWAY="${IPADDR#*@}" GATEWAY="${GATEWAY%%@*}" + IPADDR="${IPADDR%%@*}" + ;; + # No gateway? We need at least a subnet, anyway! + */*) : ;; + # ... No? Then stop right here. + *) + warn "The IP address should include a netmask." + die 1 "Maybe you meant $IPADDR/24 ?" + ;; + esac +} + +# If a DHCP method was specified, extract the DHCP options. +if [ "$DHCP_CLIENT" ]; then + case "$IPADDR" in + *:*) DHCP_OPTIONS="${IPADDR#*:}" ;; + esac +fi + +if [ "$DOCKERPID" ]; then + NSPID=$DOCKERPID +else + NSPID=$(head -n 1 "$(find "$CGROUPMNT" -name "$GUESTNAME" | head -n 1)/tasks") + [ "$NSPID" ] || { + # it is an alternative way to get the pid + NSPID=$(lxc-info -n "$GUESTNAME" | grep PID | grep -Eo '[0-9]+') + [ "$NSPID" ] || { + die 1 "Could not find a process inside container $GUESTNAME." + } + } +fi + +# Check if an incompatible VLAN device already exists +[ "$IFTYPE" = phys ] && [ "$VLAN" ] && [ -d "/sys/class/net/$IFNAME.VLAN" ] && { + ip -d link show "$IFNAME.$VLAN" | grep -q "vlan.*id $VLAN" || { + die 1 "$IFNAME.VLAN already exists but is not a VLAN device for tag $VLAN" + } +} + +[ ! -d /var/run/netns ] && mkdir -p /var/run/netns +rm -f "/var/run/netns/$NSPID" +ln -s "/proc/$NSPID/ns/net" "/var/run/netns/$NSPID" + +# Check if we need to create a bridge. +[ "$IFTYPE" = bridge ] && [ ! -d "/sys/class/net/$IFNAME" ] && { + [ "$BRTYPE" = linux ] && { + (ip link add dev "$IFNAME" type bridge > /dev/null 2>&1) || (brctl addbr "$IFNAME") + ip link set "$IFNAME" up + } + [ "$BRTYPE" = openvswitch ] && { + ovs-vsctl add-br "$IFNAME" + } +} + +[ "$IFTYPE" != "route" ] && [ "$IFTYPE" != "dummy" ] && MTU=$(ip link show "$IFNAME" | awk '{print $5}') + +# If it's a bridge, we need to create a veth pair +[ "$IFTYPE" = bridge ] && { + if [ -z "$LOCAL_IFNAME" ]; then + LOCAL_IFNAME="v${CONTAINER_IFNAME}pl${NSPID}" + fi + GUEST_IFNAME="v${CONTAINER_IFNAME}pg${NSPID}" + # Does the link already exist? + if ip link show "$LOCAL_IFNAME" >/dev/null 2>&1; then + # link exists, is it in use? + if ip link show "$LOCAL_IFNAME" up | grep -q "UP"; then + echo "Link $LOCAL_IFNAME exists and is up" + exit 1 + fi + # delete the link so we can re-add it afterwards + ip link del "$LOCAL_IFNAME" + fi + ip link add name "$LOCAL_IFNAME" mtu "$MTU" type veth peer name "$GUEST_IFNAME" mtu "$MTU" + case "$BRTYPE" in + linux) + (ip link set "$LOCAL_IFNAME" master "$IFNAME" > /dev/null 2>&1) || (brctl addif "$IFNAME" "$LOCAL_IFNAME") + ;; + openvswitch) + if ! ovs-vsctl list-ports "$IFNAME" | grep -q "^${LOCAL_IFNAME}$"; then + ovs-vsctl add-port "$IFNAME" "$LOCAL_IFNAME" ${VLAN:+tag="$VLAN"} + fi + ;; + esac + ip link set "$LOCAL_IFNAME" up +} + +# If it's a physical interface, create a macvlan subinterface +[ "$IFTYPE" = phys ] && { + [ "$VLAN" ] && { + [ ! -d "/sys/class/net/${IFNAME}.${VLAN}" ] && { + ip link add link "$IFNAME" name "$IFNAME.$VLAN" mtu "$MTU" type vlan id "$VLAN" + } + ip link set "$IFNAME" up + IFNAME=$IFNAME.$VLAN + } + + if [ ! -z "$DIRECT_PHYS" ]; then + GUEST_IFNAME=$IFNAME + else + GUEST_IFNAME=ph$NSPID$CONTAINER_IFNAME + ip link add link "$IFNAME" dev "$GUEST_IFNAME" mtu "$MTU" type macvlan mode bridge + fi + + ip link set "$IFNAME" up +} + +# If it's an IPoIB interface, create a virtual IPoIB interface (the IPoIB +# equivalent of a macvlan device) +# +# Note: no macvlan subinterface nor Ethernet bridge can be created on top of an +# IPoIB interface. InfiniBand is not Ethernet. IPoIB is an IP layer on top of +# InfiniBand, without an intermediate Ethernet layer. +[ "$IFTYPE" = ipoib ] && { + GUEST_IFNAME="${IFNAME}.${NSPID}" + + # If a partition key is provided, use it + [ "$PKEY" ] && { + GUEST_IFNAME="${IFNAME}.${PKEY}.${NSPID}" + PKEY="pkey 0x$PKEY" + } + + ip link add link "$IFNAME" name "$GUEST_IFNAME" type ipoib $PKEY + ip link set "$IFNAME" up +} + +# If its a dummy interface, create a dummy interface. +[ "$IFTYPE" = dummy ] && { + GUEST_IFNAME=du$NSPID$CONTAINER_IFNAME + ip link add dev "$GUEST_IFNAME" type dummy +} + +# If the `route` command was specified ... +if [ "$IFTYPE" = route ]; then + # ... discard the first two arguments and pass the rest to the route command. + shift 2 + ip netns exec "$NSPID" ip route "$@" +else + # Otherwise, run normally. + ip link set "$GUEST_IFNAME" netns "$NSPID" + ip netns exec "$NSPID" ip link set "$GUEST_IFNAME" name "$CONTAINER_IFNAME" + [ "$MACADDR" ] && ip netns exec "$NSPID" ip link set dev "$CONTAINER_IFNAME" address "$MACADDR" + + # When using any of the DHCP methods, we start a DHCP client in the + # network namespace of the container. With the 'dhcp' method, the + # client used is taken from the Docker busybox image (therefore + # requiring no specific client installed on the host). Other methods + # use a locally installed client. + case "$DHCP_CLIENT" in + dhcp) + docker run -d --net container:$GUESTNAME --cap-add NET_ADMIN \ + busybox udhcpc -i "$CONTAINER_IFNAME" -x "hostname:$GUESTNAME" \ + $DHCP_OPTIONS \ + >/dev/null + ;; + udhcpc) + DHCP_Q="-q" + [ "$DHCP_FOREGROUND" ] && { + DHCP_OPTIONS="$DHCP_OPTIONS -f" + } + ip netns exec "$NSPID" "$DHCP_CLIENT" -qi "$CONTAINER_IFNAME" \ + -x "hostname:$GUESTNAME" \ + -p "/var/run/udhcpc.$GUESTNAME.pid" \ + $DHCP_OPTIONS + [ ! "$DHCP_FOREGROUND" ] && { + rm "/var/run/udhcpc.$GUESTNAME.pid" + } + ;; + dhclient) + ip netns exec "$NSPID" "$DHCP_CLIENT" "$CONTAINER_IFNAME" \ + -pf "/var/run/dhclient.$GUESTNAME.pid" \ + -lf "/etc/dhclient/dhclient.$GUESTNAME.leases" \ + $DHCP_OPTIONS + # kill dhclient after get ip address to prevent device be used after container close + [ ! "$DHCP_FOREGROUND" ] && { + kill "$(cat "/var/run/dhclient.$GUESTNAME.pid")" + rm "/var/run/dhclient.$GUESTNAME.pid" + } + ;; + dhcpcd) + ip netns exec "$NSPID" "$DHCP_CLIENT" -q "$CONTAINER_IFNAME" -h "$GUESTNAME" + ;; + "") + if installed ipcalc; then + eval $(ipcalc -b $IPADDR) + ip netns exec "$NSPID" ip "$FAMILY_FLAG" addr add "$IPADDR" brd "$BROADCAST" dev "$CONTAINER_IFNAME" + else + ip netns exec "$NSPID" ip "$FAMILY_FLAG" addr add "$IPADDR" dev "$CONTAINER_IFNAME" + fi + + [ "$GATEWAY" ] && { + ip netns exec "$NSPID" ip "$FAMILY_FLAG" route delete default >/dev/null 2>&1 && true + } + ip netns exec "$NSPID" ip "$FAMILY_FLAG" link set "$CONTAINER_IFNAME" up + [ "$GATEWAY" ] && { + ip netns exec "$NSPID" ip "$FAMILY_FLAG" route get "$GATEWAY" >/dev/null 2>&1 || \ + ip netns exec "$NSPID" ip "$FAMILY_FLAG" route add "$GATEWAY/32" dev "$CONTAINER_IFNAME" + ip netns exec "$NSPID" ip "$FAMILY_FLAG" route replace default via "$GATEWAY" dev "$CONTAINER_IFNAME" + } + ;; + esac + + # Give our ARP neighbors a nudge about the new interface + if installed arping; then + IPADDR=$(echo "$IPADDR" | cut -d/ -f1) + ip netns exec "$NSPID" arping -c 1 -A -I "$CONTAINER_IFNAME" "$IPADDR" > /dev/null 2>&1 || true + else + echo "Warning: arping not found; interface may not be immediately reachable" + fi +fi +# Remove NSPID to avoid `ip netns` catch it. +rm -f "/var/run/netns/$NSPID" + +# vim: set tabstop=2 shiftwidth=2 softtabstop=2 expandtab : diff --git a/util/docker-compose/roles/compass/files/prepare_ansible.sh b/util/docker-compose/roles/compass/files/prepare_ansible.sh new file mode 100755 index 00000000..031333c8 --- /dev/null +++ b/util/docker-compose/roles/compass/files/prepare_ansible.sh @@ -0,0 +1,8 @@ +#!/bin/bash + +for i in `ls /root/compass4nfv/deploy/adapters/ansible | grep "openstack_"`; do + mkdir -p /root/docker_compose/ansible/$i + cp -rf /root/compass4nfv/deploy/adapters/ansible/openstack/* /root/docker_compose/ansible/$i + cp -rf /root/compass4nfv/deploy/adapters/ansible/$i /root/docker_compose/ansible/ +done +cp -rf /root/compass4nfv/deploy/adapters/ansible/roles /root/docker_compose/ansible/ diff --git a/util/docker-compose/roles/compass/files/preseed_post_anamon b/util/docker-compose/roles/compass/files/preseed_post_anamon new file mode 100755 index 00000000..b4c85253 --- /dev/null +++ b/util/docker-compose/roles/compass/files/preseed_post_anamon @@ -0,0 +1,80 @@ +#if $str($getVar('anamon_enabled','')) == "1" + +## install anamon script + #if $getVar("compass_server", "") != "" +wget -O /usr/local/sbin/anamon "http://$compass_server:$http_port/cobbler/aux/anamon" + #else +wget -O /usr/local/sbin/anamon "http://$server:$http_port/cobbler/aux/anamon" + #end if +## install anamon system service +cat << EOF > /etc/init.d/anamon.init +#raw +#!/bin/bash +## BEGIN INIT INFO +# Provides: anamon.init +# Default-Start: 3 5 +# Default-Stop: 0 1 2 4 6 +# Required-Start: $network +# Short-Description: Starts the cobbler anamon boot notification program +# Description: anamon runs the first time a machine is booted after +# installation. +## END INIT INFO + +# +# anamon.init: Starts the cobbler post-install boot notification program +# +# chkconfig: 35 95 95 +# +# description: anamon runs the first time a machine is booted after +# installation. +# +#end raw +cd /var/log/installer +gunzip initial-status.gz +cd - +#if $getVar("compass_server","") != "" +/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $compass_server --port $http_port --exit +#else +/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $server --port $http_port --exit +#end if +update-rc.d -f anamon remove +mv /etc/init.d/anamon.init /tmp/anamon.init +EOF + +## adjust permissions +chmod 755 /etc/init.d/anamon.init /usr/local/sbin/anamon +test -d /selinux && restorecon /etc/init.d/anamon.init /usr/local/sbin/anamon + +## enable the script +update-rc.d anamon.init defaults 95 95 +#end if + +## place start-up script for updating os state +#if $getVar('compass_server', '') != "" + #set srv = $getVar('compass_server','') +#else + #set srv = $getVar('server','') +#end if +cat << EOF > /etc/init.d/set_state +#raw +#!/bin/bash +# Provides: set_state +# Default-Start: 3 5 +# Default-Stop: 0 1 2 4 6 +# Required-Start: $network $ssh +# Short-Description: Notifies the os installation is finished +# Description: set_state runs the first time a machine is booted after +# installation. +#end raw +wget -O /tmp/os_state --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv:5050/api/hosts/${host_id}/state_internal" +update-rc.d -f set_state remove +mv /etc/init.d/set_state /tmp/set_state +EOF + +## adjust permissions +chmod 755 /etc/init.d/set_state +test -d /selinux && restorecon /etc/init.d/set_state + +update-rc.d set_state defaults 99 99 + +echo "compass_server=$server" >> /etc/compass.conf diff --git a/util/docker-compose/roles/compass/files/switch_list.conf b/util/docker-compose/roles/compass/files/switch_list.conf new file mode 100755 index 00000000..21c46c0a --- /dev/null +++ b/util/docker-compose/roles/compass/files/switch_list.conf @@ -0,0 +1,3 @@ +SWITCH_LIST = [ + '127.0.0.1' +] diff --git a/util/docker-compose/roles/compass/files/up_containers.sh b/util/docker-compose/roles/compass/files/up_containers.sh new file mode 100755 index 00000000..9aca591a --- /dev/null +++ b/util/docker-compose/roles/compass/files/up_containers.sh @@ -0,0 +1,3 @@ +#!/bin/bash +cd /root/docker_compose +docker-compose up |