diff options
Diffstat (limited to 'docs')
-rw-r--r-- | docs/FAQ/FAQ.rst | 40 | ||||
-rw-r--r-- | docs/FAQ/how-to-build-customized-iso.rst (renamed from docs/how-to-use-compass4nfv/documentation-compass4nfv.rst) | 252 | ||||
-rw-r--r-- | docs/FAQ/how-to-deploy-without-internet-access.rst | 18 | ||||
-rw-r--r-- | docs/FAQ/how-to-integrate-plugins.rst | 7 | ||||
-rw-r--r-- | docs/FAQ/index.rst | 13 | ||||
-rw-r--r-- | docs/configguide/index.rst (renamed from docs/installation-instructions/index.rst) | 7 | ||||
-rw-r--r-- | docs/configguide/installerconfig.rst | 354 | ||||
-rw-r--r-- | docs/configguide/introduction.rst | 29 | ||||
-rw-r--r-- | docs/configguide/postinstall.rst | 50 | ||||
-rw-r--r-- | docs/configguide/references.rst | 40 | ||||
-rw-r--r-- | docs/configguide/vmdeploy.rst | 46 | ||||
-rw-r--r-- | docs/how-to-use-compass4nfv/compass4nfv_host_network.png | bin | 36846 -> 0 bytes | |||
-rw-r--r-- | docs/how-to-use-compass4nfv/compass4nfv_network_topology.png | bin | 155268 -> 0 bytes | |||
-rw-r--r-- | docs/how-to-use-compass4nfv/index.rst | 13 | ||||
-rw-r--r-- | docs/installation-instructions/installation-instructions.rst | 407 | ||||
-rw-r--r-- | docs/release-notes/release-notes.rst | 80 |
16 files changed, 577 insertions, 779 deletions
diff --git a/docs/FAQ/FAQ.rst b/docs/FAQ/FAQ.rst deleted file mode 100644 index e32bd503..00000000 --- a/docs/FAQ/FAQ.rst +++ /dev/null @@ -1,40 +0,0 @@ -========================================================================================== -OPNFV FAQ for the Brahmaputra release of OPNFV when using Compass4nfv as a deployment tool -========================================================================================== - - -.. contents:: Table of Contents - :backlinks: none - - -Abstract -======== - -This document describes Frequently Asked Questions of OPNFV when using Compass4nfv -as a deployment tool. - -License -======= - -Brahmaputra release of OPNFV when using Compass4nfv as a deployment tool Docs -(c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) - -Brahmaputra release of OPNFV when using Compass4nfv as a deployment tool Docs -are licensed under a Creative Commons Attribution 4.0 International License. -You should have received a copy of the license along with this. -If not, see <http://creativecommons.org/licenses/by/4.0/>. - -Version history -=============== - -+--------------------+--------------------+--------------------+---------------------------+ -| **Date** | **Ver.** | **Author** | **Comment** | -| | | | | -+--------------------+--------------------+--------------------+---------------------------+ -| 2016-01-17 | 0.0.1 | Justin Chi | First draft | -| | | (HUAWEI) | | -+--------------------+--------------------+--------------------+---------------------------+ - - -:Authors: Justin Chi (HUAWEI) -:Version: 0.0.1 diff --git a/docs/how-to-use-compass4nfv/documentation-compass4nfv.rst b/docs/FAQ/how-to-build-customized-iso.rst index 7fbd1578..37b5c72b 100644 --- a/docs/how-to-use-compass4nfv/documentation-compass4nfv.rst +++ b/docs/FAQ/how-to-build-customized-iso.rst @@ -1,45 +1,5 @@ .. two dots create a comment. please leave this logo at the top of each of your rst files. -Prerequisite -============ - -1. One jumpserver installed with Ubuntu14.04. - - -2. If baremetal is targeted deployment environment, we suggest the environment as the following topology picture, -jumpserver and baremetal need 3 ethernet ports, one ports(External/Tenant) connects to one switch, -and two ports (IPMI/BMC, PXE/Installation) connects to another switch. - -.. image:: compass4nfv_network_topology.png - :height: 400 - :width: 700 - :alt: OPNFV - :align: left - -If jumpserver doesn't have enough ethernet ports, two ports is -also acceptable(IPMI/BMC and PXE/Installation run through one ethernet port). - -If switches are not enough, one switch with 2 VLANs is also acceptable. - - -3. Pre-allocate BMC IP addresses for baremetals, and get accounts and passwords of BMC on baremetals. - - -4. If virtual machines is targeted deployment environment, the jumpserver also needs 100G storage and 16G RAM. - - -5. Gerrit: git clone https://gerrit.opnfv.org/gerrit/compass4nfv to the jumpserver. - - -6. Please don't git clone compass4nfv in the root directory. - - -Attention: Compass4nfv does stick on the OPNFV communities' Operating System version requirement. -For Brahmaputra, Ubuntu14.04 or newer and Centos7.0 or newer are requested, -so the targeted deployment environment will be installed on Ubuntu14.04 or Centos7.1. - - - How to build a customized ISO ============================= @@ -332,215 +292,3 @@ in the "compass4nfv/work/building" folder, that means building ISO successfully. * Approach 3 ---- autonomous packages installation package installed, to be continued... - - - -How to deploy baremetal and VMs -=============================== - -Before deployment, there are some network configuration to be checked based on your reality network topology. -Compass4nfv network configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". - -Based on current default network configuration, the hosts(controller,compute) network is as following picture. - -.. image:: compass4nfv_host_network.png - :height: 500 - :width: 700 - :alt: OPNFV - :align: left - -network_cfg.yaml - -.. code-block:: bash - - provider_net_mappings: - - name: br-prv - network: physnet - interface: eth1 - type: ovs - role: - - controller - - compute - sys_intf_mappings: - - name: mgmt - interface: eth1 - vlan_tag: 2 - role: - - controller - - compute - - name: storage - interface: eth1 - vlan_tag: 3 - role: - - controller - - compute - - name: external - interface: br-prv - vlan_tag: 4 - role: - - controller - - compute - ip_settings: - - name: mgmt - ip_ranges: - - - "172.16.1.1" - - "172.16.1.254" - cidr: "172.16.1.0/24" - role: - - controller - - compute - - name: storage - ip_ranges: - - - "172.16.2.1" - - "172.16.2.254" - cidr: "172.16.2.0/24" - role: - - controller - - compute - - name: external - ip_ranges: - - - "172.16.3.2" - - "172.16.3.100" - cidr: "172.16.3.0/24" - gw: "172.16.3.1" - role: - - controller - - compute - - - -"br-prv" is a bridge created by OpenvSwitch, "mgmt" "storage" and "external" are VLAN. - -"mgmt" "stoarge" and "br-prv" can locate on any ethernet port("interface") -as long as the host can communicate with other hosts via this ethernet. - -"external" must locate on "br-prv". - -"mgmt" "storage" and "external" could be set subnet as you like, -but must be in different subnets and "vlan_tag" also must be different. - - -Also check the following items in file "compass4nfv/deploy/conf/base.conf" - -.. code-block:: bash - - export INSTALL_IP=${INSTALL_IP:-10.1.0.12} - export INSTALL_MASK=${INSTALL_MASK:-255.255.255.0} - export INSTALL_GW=${INSTALL_GW:-10.1.0.1} - - -Item "INSTALL_IP" is used to install baremetal/VM during deployment. -Compass4nfv on jumpserver creates a bridge with IP address "INSTALL_GW" and -all baremetal/VM deployments are via this subnet. Please don't set this item -as the same subnet as any other ip configuration in the jumpserver. - - - - - -* Deploy baremetal in HA mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, -modify the item "ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. Edit compass4nfv/deploy/conf/baremetal_cluster_general.yml, to be continued... - - -3. Edit compass4nfv/deploy/conf/base.conf, modify the item "export OM_NIC=${OM_NIC:-eth3}" -as the install network ethernet port based your jumpserver. - - -4. Run compass4nfv/deploy.sh baremetal_cluster_general - - - - -* Deploy baremetal in Single mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, modify the item "ISO_URL" -as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. Edit compass4nfv/deploy/conf/baremetal_five.yml , change items -[name, mac, ipmiUser, ipmiPass, ipmiIp, roles] based on the baremetal to be deployed. - - -3. Edit compass4nfv/deploy/conf/base.conf, modify the item -"export OM_NIC=${OM_NIC:-eth3}" as the install network ethernet port based your jumpserver. - - -4. Run compass4nfv/deploy.sh baremetal_five - - - - -* Deploy VMs in HA mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, modify the item -"ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. (Optional) Edit compass4nfv/deploy/conf/virtual_cluster.yml, change items [name, roles] as you want, -also you could reduce or add hosts sections as you want. -And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. - - -3. Run compass4nfv/deploy.sh virtual_cluster or Run compass4nfv/deploy.sh . - - - - -* Deploy baremetal in Single mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, -modify the item "ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. (Optional) Edit compass4nfv/deploy/conf/virtual_five.yml, change items [name, roles] as you want, -also you could reduce or add hosts sections as you want. -And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. - - -3. Run compass4nfv/deploy.sh virtual_five . - - -Attention: -Roles here includes controller compute network storage ha odl and onos. - - - - - -How to deploy without internet access -===================================== - - -If you have created your own ISO file(compass.iso), you realy could deploy without internet access, -edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path -(export ISO_URL=file:///compass4nfv/work/building/compass.iso). -Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. - - -Also you can download compass.iso first from OPNFV artifacts repository -(http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl. -After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path. -Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. - - - - - -How to integration plugins -========================== - - - diff --git a/docs/FAQ/how-to-deploy-without-internet-access.rst b/docs/FAQ/how-to-deploy-without-internet-access.rst new file mode 100644 index 00000000..6bfcb3de --- /dev/null +++ b/docs/FAQ/how-to-deploy-without-internet-access.rst @@ -0,0 +1,18 @@ +.. two dots create a comment. please leave this logo at the top of each of your rst files. + +How to deploy without internet access +===================================== + +If you have created your own ISO file(compass.iso), you realy could deploy without internet access, +edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path +(export ISO_URL=file:///compass4nfv/work/building/compass.iso). +Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. + + +Also you can download compass.iso first from OPNFV artifacts repository +(http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl. +After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path. +Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. + + + diff --git a/docs/FAQ/how-to-integrate-plugins.rst b/docs/FAQ/how-to-integrate-plugins.rst new file mode 100644 index 00000000..8e810d7d --- /dev/null +++ b/docs/FAQ/how-to-integrate-plugins.rst @@ -0,0 +1,7 @@ +.. two dots create a comment. please leave this logo at the top of each of your rst files. + +How to integrate plugins +======================== + +tbd + diff --git a/docs/FAQ/index.rst b/docs/FAQ/index.rst index 0a072875..dfe8de3e 100644 --- a/docs/FAQ/index.rst +++ b/docs/FAQ/index.rst @@ -1,6 +1,9 @@ -********************************** -OPNFV(Brahmaputra) Compass4nfv FAQ -********************************** +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 + +========================================================= +OPNFV(Brahmaputra) Compass4nfv Frequently Asked Questions +========================================================= Contents: @@ -8,4 +11,6 @@ Contents: :numbered: :maxdepth: 4 - FAQ.rst + how-to-build-customized-iso.rst + how-to-deploy-without-internet-access.rst + how-to-integrate-plugins.rst diff --git a/docs/installation-instructions/index.rst b/docs/configguide/index.rst index dc51516e..71ea3127 100644 --- a/docs/installation-instructions/index.rst +++ b/docs/configguide/index.rst @@ -5,11 +5,12 @@ OPNFV(Brahmaputra) Compass4nfv installation instructions ******************************************************** -Contents: - .. toctree:: :numbered: :maxdepth: 4 - installation-instructions.rst + introduction.rst + installerconfig.rst + vmdeploy.rst + references.rst diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst index dd4a4333..3d9269a4 100644 --- a/docs/configguide/installerconfig.rst +++ b/docs/configguide/installerconfig.rst @@ -1,23 +1,347 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) -<Project> configuration -======================= -Add a brief introduction to configure OPNFV with this specific installer +Compass4nfv configuration +========================= -Pre-configuration activities ------------------------------ -Describe specific pre-configuration activities. Refer to Installations guide and release notes +This document describes providing guidelines on how to install and +configure the Brahmaputra release of OPNFV when using Compass as a +deployment tool including required software and hardware +configurations. -Hardware configuration ------------------------ -Describe the hardware configuration needed for this specific installer +Installation and configuration of host OS, OpenStack, OpenDaylight, +ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal +nodes. -Jumphost configuration ------------------------ -Describe intial Jumphost configuration (network and software)needed in order to deploy the installer +The audience of this document is assumed to have good knowledge in +networking and Unix/Linux administration. -Platform components configuration ---------------------------------- -Describe the configuration of each component in the installer +Preconditions +============= + +Before starting the installation of the Brahmaputra release of OPNFV, +some planning must be done. + + +Retrieving the installation ISO image +------------------------------------- + +First of all, The installation ISO is needed for deploying your OPNFV +environment, it included packages of Compass,OpenStack,OpenDaylight,ONOS +and so on. the iso can be retrieved via OPNFV artifacts repository: + +http://artifacts.opnfv.org/ + +NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image. + +E.g. +compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso +compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties + +The name of iso image includes the time of iso building, you can get the daily +ISO according the building time. +The git url and sha1 of Compass4nfv are recorded in properties files, +According these, the corresponding deployment scripts can be retrieved. + + +Getting the deployment scripts +------------------------------ + +To retrieve the repository of Compass4nfv on Jumphost use the following command: + +- git clone https://gerrit.opnfv.org/gerrit/compass4nfv + +NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY. + +If you don't have a Linux foundation user id, get your own by the url: + +https://wiki.opnfv.org/developer/getting_started + +Set the branch to the corresponding deployment scripts: + +E.g. +Git sha1 in file "opnfv-2016-01-16_15-03-18.properties" is +d5a13ce7cc2ce89946d34b0402ecf33c1d291851 + +- git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851 + + +Preparing the installation environment +-------------------------------------- + +If you have only 1 Bare Metal server, Virtual deployment is recommended. if more +than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of +servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller, +1 for compute. + + +Setup Requirements +================== + +Jumphost Requirements +--------------------- + +The Jumphost requirements are outlined below: + +1. Ubuntu 14.04 (Pre-installed). + +2. Root access. + +3. libvirt virtualization support. + +4. Minimum 2 NICs. + + - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) + + - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) + + - External Network (Optional: Internet access) + +5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment. + +6. Minimum 100G storage. + +Bare Metal Node Requirements +---------------------------- + +Bare Metal nodes require: + +1. IPMI enabled on OOB interface for power control. + +2. BIOS boot priority should be PXE first then local hard disk. + +3. Minimum 3 NICs. + + - PXE installation Network (Broadcasting PXE request) + + - IPMI Network (Receiving IPMI command from Jumphost) + + - External Network (OpenStack mgmt/external/storage/tenant network) + +Network Requirements +-------------------- + +Network requirements include: + +1. No DHCP or TFTP server running on networks used by OPNFV. + +2. 2-6 separate networks with connectivity between Jumphost and nodes. + + - PXE installation Network + + - IPMI Network + + - Openstack mgmt Network* + + - Openstack external Network* + + - Openstack tenant Network* + + - Openstack storage Network* + +3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). + +4. External network has Internet access, meaning a gateway and DNS availability. + +**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** +**NIC(Reconfigurated in network.yml).** + +Execution Requirements (Bare Metal Only) +---------------------------------------- + +In order to execute a deployment, one must gather the following information: + +1. IPMI IP addresses for the nodes. + +2. IPMI login information for the nodes (user/pass). + +3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. + +Installation Guide (BM Deployment) +================================== + +Nodes Configuration (BM Deployment) +----------------------------------- + +The bellow file is the inventory template of deployment nodes: + +"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml" + +You can write your own IPMI IP/User/Password/Mac address/roles reference to it. + + - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 + or IPMI 2.0 is available. + + - ipmiIP -- IPMI IP address for deployment node. Make sure it can access + from Jumphost. + + - ipmiUser -- IPMI Username for deployment node. + + - ipmiPass -- IPMI Password for deployment node. + + - mac -- MAC Address of deployment node PXE NIC . + + - name -- Host name for deployment node after installation. + + - roles -- Components deployed. + + +**Assignment of different roles to servers** + +E.g. Openstack only deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + + - name: host2 + roles: + - compute + +NOTE: +IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. + +E.g. Openstack and ceph deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - ceph-admin + - ceph-mon + + - name: host2 + roles: + - compute + - ceph-osd + +E.g. Openstack and ODL deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - odl + + - name: host2 + roles: + - compute + +E.g. Openstack and ONOS deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - onos + + - name: host2 + roles: + - compute + + +Network Configuration (BM Deployment) +------------------------------------- + +Before deployment, there are some network configuration to be checked based on your network topology. +Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". +You can write your own reference to it. + +**The following figure shows the default network configuration.** + +.. code-block:: console + + + +--+ +--+ +--+ + | | | | | | + | | +------------+ | | | | + | +------+ Jumphost +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host1 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host2 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host3 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | | | | | + +-++ ++-+ +-++ + ^ ^ ^ + | | | + | | | + +-+-------------------------+ | | + | External Network | | | + +---------------------------+ | | + +-----------------------+---+ | + | IPMI Network | | + +---------------------------+ | + +-------------------------+-+ + | PXE(Installation) Network | + +---------------------------+ + + +Start Deployment (BM Deployment) +-------------------------------- + +1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.) + +.. code-block:: bash + + export INSTALL_NIC=eth1 + +2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) + +.. code-block:: bash + + export OS_VERSION=trusty + +3. Set OpenStack version for deployment nodes. (set liberty E.g.) + +.. code-block:: bash + + export OPENSTACK_VERSION=liberty + +4. Set ISO image that you want to deploy + +.. code-block:: bash + + export ISO_URL=file:///${YOUR_OWN}/compass.iso + or + export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso + +5. Run ``deploy.sh`` with inventory and network configuration + +.. code-block:: bash + + ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml diff --git a/docs/configguide/introduction.rst b/docs/configguide/introduction.rst new file mode 100644 index 00000000..820cb29a --- /dev/null +++ b/docs/configguide/introduction.rst @@ -0,0 +1,29 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Abstract +======== + +This document describes how to install the Brahmaputra release of OPNFV when +using Compass4nfv as a deployment tool covering it's limitations, dependencies +and required system resources. + +Version history +=============== + ++--------------------+--------------------+--------------------+---------------------------+ +| **Date** | **Ver.** | **Author** | **Comment** | +| | | | | ++--------------------+--------------------+--------------------+---------------------------+ +| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for | +| | | (HUAWEI) | Compass4nfv B release | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & | +| | | (HUAWEI) | formatting | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-09-12 | 0.0.1 | Chen Shuai | First draft | +| | | (HUAWEI) | | ++--------------------+--------------------+--------------------+---------------------------+ + + diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst index 1702cea5..050f77c3 100644 --- a/docs/configguide/postinstall.rst +++ b/docs/configguide/postinstall.rst @@ -1,26 +1,32 @@ -<Project> post installation procedures -====================================== -Add a brief introduction to the methods of validating the installation -according to this specific installer or feature. +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 -Automated post installation activities --------------------------------------- -Describe specific post installation activities performed by the OPNFV -deployment pipeline including testing activities and reports. Refer to -the relevant testing guides, results, and release notes. +.. commented as there is no content for this file at this time. -note: this section should be singular and derived from the test projects -once we have one test suite to run for all deploy tools. This is not the -case yet so each deploy tool will need to provide (hopefully very simillar) -documentation of this. +.. <Project> post installation procedures +.. ====================================== +.. Add a brief introduction to the methods of validating the installation +.. according to this specific installer or feature. -<Project> post configuration procedures --------------------------------------- -Describe any deploy tool or feature specific scripts, tests or procedures -that should be carried out on the deployment post install and configuration -in this section. +.. Automated post installation activities +.. -------------------------------------- +.. Describe specific post installation activities performed by the OPNFV +.. deployment pipeline including testing activities and reports. Refer to +.. the relevant testing guides, results, and release notes. + +.. note: this section should be singular and derived from the test projects +.. once we have one test suite to run for all deploy tools. This is not the +.. case yet so each deploy tool will need to provide (hopefully very simillar) +.. documentation of this. + +.. <Project> post configuration procedures +.. -------------------------------------- +.. Describe any deploy tool or feature specific scripts, tests or procedures +.. that should be carried out on the deployment post install and configuration +.. in this section. + +.. Platform components validation +.. --------------------------------- +.. Describe any component specific validation procedures necessary for your +.. deployment tool in this section. -Platform components validation ---------------------------------- -Describe any component specific validation procedures necessary for your -deployment tool in this section. diff --git a/docs/configguide/references.rst b/docs/configguide/references.rst new file mode 100644 index 00000000..0f317dd5 --- /dev/null +++ b/docs/configguide/references.rst @@ -0,0 +1,40 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +References +========== + +OPNFV +----- + +`OPNFV Home Page <www.opnfv.org>`_ + +`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_ + +`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_ + +OpenStack +--------- + +`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_ + +`OpenStack documentation <http://docs.openstack.org>`_ + +OpenDaylight +------------ + +`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_ + +ONOS +---- + +`ONOS artifacts <http://onosproject.org/software/>`_ + +Compass +------- + +`Compass Home Page <http://www.syscompass.org/>`_ + +:Authors: Justin Chi (HUAWEI) + diff --git a/docs/configguide/vmdeploy.rst b/docs/configguide/vmdeploy.rst new file mode 100644 index 00000000..a7588845 --- /dev/null +++ b/docs/configguide/vmdeploy.rst @@ -0,0 +1,46 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Installation Guide (VM Deployment) +================================== + +Nodes Configuration (VM Deployment) +----------------------------------- + +Please follow the instructions in section `Installation Guide (BM Deployment)`, +and no need to set IPMI/PXE/MAC parameters. + +Network Configuration (VM Deployment) +------------------------------------- + +Please follow the instructions in section `Installation Guide (BM Deployment)`. + +Start Deployment (VM Deployment) +-------------------------------- + +1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) + +.. code-block:: bash + + export OS_VERSION=trusty + +3. Set OpenStack version for deployment nodes. (set liberty E.g.) + +.. code-block:: bash + + export OPENSTACK_VERSION=liberty + +4. Set ISO image that you want to deploy + +.. code-block:: bash + + export ISO_URL=file:///${YOUR_OWN}/compass.iso + or + export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso + +5. Run ``deploy.sh`` with inventory and network configuration + +.. code-block:: bash + + ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml diff --git a/docs/how-to-use-compass4nfv/compass4nfv_host_network.png b/docs/how-to-use-compass4nfv/compass4nfv_host_network.png Binary files differdeleted file mode 100644 index 93ba8c0b..00000000 --- a/docs/how-to-use-compass4nfv/compass4nfv_host_network.png +++ /dev/null diff --git a/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png b/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png Binary files differdeleted file mode 100644 index 6360b8a5..00000000 --- a/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png +++ /dev/null diff --git a/docs/how-to-use-compass4nfv/index.rst b/docs/how-to-use-compass4nfv/index.rst deleted file mode 100644 index f4a5bdeb..00000000 --- a/docs/how-to-use-compass4nfv/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -********************* -Compass4nfv Project -********************* - -Contents: - -.. toctree:: - :numbered: - :maxdepth: 4 - - how-to-use-compass4nfv/documentation-compass4nfv.rst - how-to-use-compass4nfv/compass4nfv_host_network.png - how-to-use-compass4nfv/compass4nfv_network_topology.png diff --git a/docs/installation-instructions/installation-instructions.rst b/docs/installation-instructions/installation-instructions.rst deleted file mode 100644 index 7fc3135a..00000000 --- a/docs/installation-instructions/installation-instructions.rst +++ /dev/null @@ -1,407 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) - -========================================================================================================== -Installation instructions for the Brahmaputra release of OPNFV when using Compass4nfv as a deployment tool -========================================================================================================== - - -.. contents:: Table of Contents - :backlinks: none - - -Abstract -======== - -This document describes how to install the Brahmaputra release of OPNFV when -using Compass4nfv as a deployment tool covering it's limitations, dependencies -and required system resources. - -Version history -=============== - -+--------------------+--------------------+--------------------+---------------------------+ -| **Date** | **Ver.** | **Author** | **Comment** | -| | | | | -+--------------------+--------------------+--------------------+---------------------------+ -| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for | -| | | (HUAWEI) | Compass4nfv B release | -+--------------------+--------------------+--------------------+---------------------------+ -| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & | -| | | (HUAWEI) | formatting | -+--------------------+--------------------+--------------------+---------------------------+ -| 2015-09-12 | 0.0.1 | Chen Shuai | First draft | -| | | (HUAWEI) | | -+--------------------+--------------------+--------------------+---------------------------+ - -Introduction -============ - -This document describes providing guidelines on how to install and -configure the Brahmaputra release of OPNFV when using Compass as a -deployment tool including required software and hardware -configurations. - -Installation and configuration of host OS, OpenStack, OpenDaylight, -ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal -nodes. - -The audience of this document is assumed to have good knowledge in -networking and Unix/Linux administration. - -Preface -======= - -Before starting the installation of the Brahmaputra release of OPNFV -when using Compass4nfv as a deployment tool, some planning must be done. - - -Retrieving the installation ISO image -------------------------------------- - -First of all, The installation ISO is needed for deploying your OPNFV -environment, it included packages of Compass,OpenStack,OpenDaylight,ONOS -and so on. the iso can be retrieved via OPNFV artifacts repository: - -http://artifacts.opnfv.org/ - -NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image. - -E.g. -compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso -compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties - -The name of iso image includes the time of iso building. -The git url and sha1 of Compass4nfv are recorded in properties files, -According these, the corresponding deployment scripts can be retrieved. - - -Getting the deployment scripts ------------------------------- - -To retrieve the repository of Compass4nfv on Jumphost use the following command: - -- git clone https://gerrit.opnfv.org/gerrit/compass4nfv - -NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY. - -If you don't have a Linux foundation user id, get your own by the url: - -https://wiki.opnfv.org/developer/getting_started - -Set the branch to the corresponding deployment scripts: - -E.g. -Git sha1 in file "opnfv-2016-01-16_15-03-18.properties" is -d5a13ce7cc2ce89946d34b0402ecf33c1d291851 - -- git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851 - - -Preparing the installation environment --------------------------------------- - -If you have only 1 Bare Metal server, Virtual deployment is recommended. if more -than or equal 3 servers, the Bare Metal deployment is recommended. The minimum of Bare Metal -deployment server is 3, 1 for JumpServer(Jumphost), 1 for controller, 1 for computer. - - -Setup Requirements -================== - -Jumphost Requirements ---------------------- - -The Jumphost requirements are outlined below: - -1. Ubuntu 14.04 (Pre-installed). - -2. Root access. - -3. libvirt virtualization support. - -4. Minimum 2 NICs. - - - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) - - - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) - - - External Network (Optional: Internet access) - -5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment. - -6. Minimum 100G storage. - -Bare Metal Node Requirements ----------------------------- - -Bare Metal nodes require: - -1. IPMI enabled on OOB interface for power control. - -2. BIOS boot priority should be PXE first then local hard disk. - -3. Minimum 3 NICs. - - - PXE installation Network (Broadcasting PXE request) - - - IPMI Network (Receiving IPMI command from Jumphost) - - - External Network (OpenStack mgmt/external/storage/tenant network) - -Network Requirements --------------------- - -Network requirements include: - -1. No DHCP or TFTP server running on networks used by OPNFV. - -2. 2-6 separate networks with connectivity between Jumphost and nodes. - - - PXE installation Network - - - IPMI Network - - - Openstack mgmt Network* - - - Openstack external Network* - - - Openstack tenant Network* - - - Openstack storage Network* - -3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). - -4. External network has Internet access, meaning a gateway and DNS availability. - -**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** -**NIC(Reconfigurated in network.yml).** - -Execution Requirements (Bare Metal Only) ----------------------------------------- - -In order to execute a deployment, one must gather the following information: - -1. IPMI IP addresses for the nodes. - -2. IPMI login information for the nodes (user/pass). - -3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. - - -Installation Guide (BM Deployment) -================================== - -Nodes Configuration -------------------- - -The bellow file is the inventory template of deployment nodes: - -"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml" - -You can write your own IPMI IP/User/Password/Mac address/roles reference to it. - - - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 - or IPMI 2.0 is available. - - - ipmiIP -- IPMI IP address for deployment node. Make sure it can access - from Jumphost. - - - ipmiUser -- IPMI Username for deployment node. - - - ipmiPass -- IPMI Password for deployment node. - - - mac -- MAC Address of deployment node PXE NIC . - - - name -- Host name for deployment node after installation. - - - roles -- Components deployed. - -E.g. Openstack only deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - - name: host2 - roles: - - compute - -NOTE: -IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. - -E.g. Openstack and ceph deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - ceph-admin - - ceph-mon - - - name: host2 - roles: - - compute - - ceph-osd - -E.g. Openstack and ODL deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - odl - - - name: host2 - roles: - - compute - -E.g. Openstack and ONOS deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - onos - - - name: host2 - roles: - - compute - - -Network Configuration ---------------------- - -Before deployment, there are some network configuration to be checked based on your network topology. -Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". -You can write your own reference to it. - -Start Deployment ----------------- - -1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.) - -.. code-block:: bash - - export INSTALL_NIC=eth1 - -2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) - -.. code-block:: bash - - export OS_VERSION=trusty - -3. Set OpenStack version for deployment nodes. (set liberty E.g.) - -.. code-block:: bash - - export OPENSTACK_VERSION=liberty - -4. Set ISO image that you want to deploy - -.. code-block:: bash - - export ISO_URL=file:///${YOUR_OWN}/compass.iso - or - export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso - -5. Run ``deploy.sh`` with inventory and network configuration - -.. code-block:: bash - - ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml - - -Installation Guide (VM Deployment) -================================== - -Nodes Configuration -------------------- - -Please follow the instructions in section `Installation Guide (BM Deployment)`, -and no need to set IPMI/PXE/MAC parameters. - -Network Configuration ---------------------- - -Please follow the instructions in section `Installation Guide (BM Deployment)`. - -Start Deployment ----------------- - -1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) - -.. code-block:: bash - - export OS_VERSION=trusty - -3. Set OpenStack version for deployment nodes. (set liberty E.g.) - -.. code-block:: bash - - export OPENSTACK_VERSION=liberty - -4. Set ISO image that you want to deploy - -.. code-block:: bash - - export ISO_URL=file:///${YOUR_OWN}/compass.iso - or - export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso - -5. Run ``deploy.sh`` with inventory and network configuration - -.. code-block:: bash - - ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml - -References -========== - -OPNFV ------ - -`OPNFV Home Page <www.opnfv.org>`_ - -`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_ - -`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_ - -OpenStack ---------- - -`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_ - -`OpenStack documentation <http://docs.openstack.org>`_ - -OpenDaylight ------------- - -`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_ - -ONOS ----- - -`ONOS artifacts <http://onosproject.org/software/>`_ - -Compass -------- - -`Compass Home Page <http://www.syscompass.org/>`_ - -:Authors: Justin Chi (HUAWEI) - diff --git a/docs/release-notes/release-notes.rst b/docs/release-notes/release-notes.rst index df055d5f..9c4267a4 100644 --- a/docs/release-notes/release-notes.rst +++ b/docs/release-notes/release-notes.rst @@ -7,18 +7,17 @@ Release Note for the Brahmaputra release of OPNFV when using Compass4nfv as a de ============================================================================================= -.. toctree:: - :maxdepth: 2 - Abstract ======== This document describes release notes of OPNFV when using Compass4nfv as a -deployment tool. +deployment tool covering it's features, limitations and required system resources. Introduction ============ +Compass4nfv is an OPNFV installer project based on open source project Compass, +which provides automated deployment and management of OpenStack and other distributed systems. Provide a brief introduction of how this release is used in OPNFV release using <XYZ> as a deployment tool Be sure to reference your installation-instructions. @@ -27,19 +26,19 @@ Release Data ============ +--------------------------------------+--------------------------------------+ -| **Project** | | +| **Project** | Compass4nfv | | | | +--------------------------------------+--------------------------------------+ -| **Repo/tag** | | +| **Repo/tag** | Compass4nfv/Brahmaputra.1.0 | | | | +--------------------------------------+--------------------------------------+ -| **Release designation** | | +| **Release designation** | Brahmaputra.1.0 | | | | +--------------------------------------+--------------------------------------+ -| **Release date** | | +| **Release date** | 2016.2.25 | | | | +--------------------------------------+--------------------------------------+ -| **Purpose of the delivery** | | +| **Purpose of the delivery** | OPNFV Brahmaputra release | | | | +--------------------------------------+--------------------------------------+ @@ -48,11 +47,28 @@ Deliverables Software deliverables ~~~~~~~~~~~~~~~~~~~~~ -<XYZ>-based installer iso file <iso file version> + + - Deployment Script + + It is a part of Compass4nfv repository, the entry of deployment sctripts is "compass4nfv/deploy.sh", + to retrieve the repository of Compass4nfv by following command: + + git clone https://gerrit.opnfv.org/gerrit/compass4nfv + + - `Compass4nfv ISO link <http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-2016-02-17_14-01-01.iso>`_ + +.. This link will be updated at final release. + +.. _document-label: Documentation deliverables ~~~~~~~~~~~~~~~~~~~~~~~~~~ -- + + - `Installation Instructions <http://artifacts.opnfv.org/compass4nfv/brahmaputra/docs/Brahmaputra_installation-instructions/index.html>`_ + + - `Release Notes <http://artifacts.opnfv.org/compass4nfv/brahmaputra/docs/Brahmaputra_release-notes/index.html>`_ + + - `FAQ <http://artifacts.opnfv.org/compass4nfv/brahmaputra/docs/Brahmaputra_FAQ/index.html>`_ Version change -------------- @@ -61,25 +77,42 @@ Version change Module version change ~~~~~~~~~~~~~~~~~~~~~ +This is the first release of compass4nfv as a deployment toolchain in OPNFV, the following +upstream components supported with this release. + + - Ubuntu 14.04.3 + + - Openstack Liberty + + - Opendaylight + + - ONOS Emu + Document version change ~~~~~~~~~~~~~~~~~~~~~~~ +None due to first release, and you can see document :ref:`document-label`. + Reason for new version ---------------------- Feature additions ~~~~~~~~~~~~~~~~~ -+--------------------------------------+--------------------------------------+ -| **JIRA REFERENCE** | **SLOGAN** | -| | | -+--------------------------------------+--------------------------------------+ -| JIRA: | | -| | | -+--------------------------------------+--------------------------------------+ -| JIRA: | | -| | | -+--------------------------------------+--------------------------------------+ ++--------------------------------------+-----------------------------------------+ +| **JIRA REFERENCE** | **SLOGAN** | +| | | ++--------------------------------------+-----------------------------------------+ +| JIRA: COMPASS-34 | Support OpenStack Liberty deployment | +| | | ++--------------------------------------+-----------------------------------------+ +| JIRA: COMPASS-307 | Integration OpenDaylight Beryllium | +| | | ++--------------------------------------+-----------------------------------------+ +| JIRA: | | +| | | ++--------------------------------------+-----------------------------------------+ + Bug corrections ~~~~~~~~~~~~~~~ @@ -121,8 +154,9 @@ See JIRA: <link> Test Result =========== -Brahmaputra test result using <XYZ> as deployment tool. -<link> +Brahmaputra test result using <Compass4nfv> as deployment tool. + + - `Functest test result <http://artifacts.opnfv.org/functest/docs/results/overview.html>`_ References ========== |