aboutsummaryrefslogtreecommitdiffstats
path: root/docs/release/FAQ/faq.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/release/FAQ/faq.rst')
-rw-r--r--docs/release/FAQ/faq.rst129
1 files changed, 129 insertions, 0 deletions
diff --git a/docs/release/FAQ/faq.rst b/docs/release/FAQ/faq.rst
new file mode 100644
index 00000000..177ff0bb
--- /dev/null
+++ b/docs/release/FAQ/faq.rst
@@ -0,0 +1,129 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+
+What is Compass4nfv
+===================
+
+Compass4nfv is an installer project based on open source project Compass,
+which provides automated deployment and management of OpenStack and other distributed systems.
+It can be considered as what the LiveCD to a single box for a pool of servers – bootstrapping
+the server pool.
+
+see more information, please visit
+
+`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
+
+`COMPASS Home Page <http://www.syscompass.org/>`_
+
+What's the additional setting in switch if use the default network configuration
+================================================================================
+
+Here is the Compass4nfv default network configration file:
+compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml
+OR
+compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+It uses a VLAN network for mgmt and storage networks that are share one NIC(eth1) as a
+default network configuration. So you need add an additional tagged VLAN (101) and VLAN (102) on
+eth1's switch for access.
+
+How to deal with installation failure caused by setting pxe and reset nodes failed
+==================================================================================
+
+At first, please make sure that deployed nodes' ipmi network can access from Jumphost and
+IPMI user/pass is correct.
+
+Compass4nfv supports IPMI 1.0 or IPMI 2.0 to control your nodes, so you can set it according your IPMI
+version in dha.yml.
+
+.. code-block:: yaml
+
+ ipmiVer: '2.0'
+
+How to deal with installation failure caused by "The Server quit without updating PID file"
+===========================================================================================
+
+If you see "The Server quit without updating PID file" in installation print log, it is caused by
+mgmt network can't access from each deployed nodes, so you need to check your switch setting whether
+an additional tagged VLAN is added if uses default network configuration.
+
+How to set OpenStack Dashboard login user and password
+======================================================
+
+It uses admin/console as the default user/pass for OpenStack Dashboard, and you can set it in below file:
+compass4nfv/deploy/conf/base.conf
+
+How to visit OpenStack Dashboard
+================================
+
+You can visit OpenStack Dashboard by URL: http://{puclib_vip}/horizon
+
+The public virtual IP is configured in "compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml"
+or "compass4nfv_FAQ/deploy/conf/vm_environment/huawei-virtual1/network.yml", defined as below:
+
+.. code-block:: yaml
+
+ public_vip:
+ ip: 192.168.50.240
+
+How to access controller nodes after deployment
+===============================================
+
+1. First you should login Compass VM via ssh command on Jumphost by default user/pass root/root.
+The default login IP of Compass VM is configured in "compass4nfv/deploy/conf/base.conf", defined as below:
+
+.. code-block:: bash
+
+ export MGMT_IP=${MGMT_IP:-192.168.200.2}
+
+2. Then you can login the controller nodes (host1-3) by default user/pass root/root via the install
+network IPs which are configured in "compass4nfv/deploy/conf/base.conf", defined as below:
+
+.. code-block:: bash
+
+ export MANAGEMENT_IP_START=${MANAGEMENT_IP_START:-'10.1.0.50'}
+
+
+.. code-block:: console
+
+
+ +-------------+
+ | |
+ +----------+ host1 |
+ | | |
+ | +-------------+
+ |
+ +---------+ | +-------------+
+ | | install | | |
+ | Compass +---------------+----------+ host2 |
+ | | network | | |
+ +---+VM+--+ | +-------------+
+ +--------------------+ |
+ | | | +-------------+
+ | Jumphost | | | |
+ | | +----------+ host3 |
+ +--------------------+ | |
+ +-------------+
+
+
+Where is OpenStack RC file
+==========================
+
+It is located /opt/admin-openrc.sh in each controller node as default. Please source it first if you
+want to use OpenStack CLI.
+
+How to recovery network connection after Jumphost reboot
+========================================================
+
+.. code-block:: bash
+
+ source deploy/network.sh && save_network_info
+
+References
+==========
+For more information on the Compass4nfv FAQ, please visit
+
+`COMPASS FAQ WIKI Page <https://wiki.opnfv.org/compass4nfv_faq>`_
+