diff options
Diffstat (limited to 'docs/installationprocedure')
| -rw-r--r-- | docs/installationprocedure/bmdeploy.rst | 328 | ||||
| -rw-r--r-- | docs/installationprocedure/index.rst | 13 | ||||
| -rw-r--r-- | docs/installationprocedure/installation.instruction.rst | 153 | ||||
| -rw-r--r-- | docs/installationprocedure/introduction.rst | 35 | ||||
| -rw-r--r-- | docs/installationprocedure/postinstall.rst | 32 | ||||
| -rw-r--r-- | docs/installationprocedure/references.rst | 38 | ||||
| -rw-r--r-- | docs/installationprocedure/vmdeploy.rst | 260 |
7 files changed, 853 insertions, 6 deletions
diff --git a/docs/installationprocedure/bmdeploy.rst b/docs/installationprocedure/bmdeploy.rst new file mode 100644 index 00000000..d08a8f8a --- /dev/null +++ b/docs/installationprocedure/bmdeploy.rst @@ -0,0 +1,328 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Installation Guide (Bare Metal Deployment) +========================================== + +Nodes Configuration (Bare Metal Deployment) +------------------------------------------- + +The below file is the inventory template of deployment nodes: + +"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml" + +You can write your own IPMI IP/User/Password/Mac address/roles reference to it. + + - name -- Host name for deployment node after installation. + + - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 + or IPMI 2.0 is available. + + - ipmiIP -- IPMI IP address for deployment node. Make sure it can access + from Jumphost. + + - ipmiUser -- IPMI Username for deployment node. + + - ipmiPass -- IPMI Password for deployment node. + + - mac -- MAC Address of deployment node PXE NIC . + + - roles -- Components deployed. + +**Set TYPE/FLAVOR and POWER TOOL** + +E.g. +.. code-block:: yaml + + TYPE: baremetal + FLAVOR: cluster + POWER_TOOL: ipmitool + +**Set ipmiUser/ipmiPass and ipmiVer** + +E.g. + +.. code-block:: yaml + + ipmiUser: USER + ipmiPass: PASSWORD + ipmiVer: '2.0' + +**Assignment of different roles to servers** + +E.g. Openstack only deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +NOTE: +IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. + +E.g. Openstack and ceph deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - ceph-adm + - ceph-mon + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + - ceph-osd + +E.g. Openstack and ODL deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - odl + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +E.g. Openstack and ONOS deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - onos + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +Network Configuration (Bare Metal Deployment) +--------------------------------------------- + +Before deployment, there are some network configuration to be checked based +on your network topology.Compass4nfv network default configuration file is +"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml". +You can write your own reference to it. + +**The following figure shows the default network configuration.** + +.. code-block:: console + + + +--+ +--+ +--+ + | | | | | | + | | +------------+ | | | | + | +------+ Jumphost +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host1 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host2 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host3 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | | | | | + +-++ ++-+ +-++ + ^ ^ ^ + | | | + | | | + +-+-------------------------+ | | + | External Network | | | + +---------------------------+ | | + +-----------------------+---+ | + | IPMI Network | | + +---------------------------+ | + +-------------------------+-+ + | PXE(Installation) Network | + +---------------------------+ + + +Start Deployment (Bare Metal Deployment) +---------------------------------------- + +1. Edit run.sh + +Set OS version and OpenStack version for deployment nodes. + Compass4nfv Colorado supports three OS version based openstack mitaka. + +E.g. + +.. code-block:: bash + + ########## Ubuntu14.04 Mitaka ########## + export OS_VERSION=trusty + export OPENSTACK_VERSION=mitaka + + ########## Ubuntu16.04 Mitaka ########## + # export OS_VERSION=xenial + # export OPENSTACK_VERSION=mitaka_xenial + + ########## Centos7 Mitaka ########## + # export OS_VERSION=centos7 + # export OPENSTACK_VERSION=mitaka + +Set ISO image that you want to deploy + +E.g. + +.. code-block:: bash + + # ISO_URL is your iso's absolute path + export ISO_URL=file:///home/compass/compass4nfv.iso + # or + # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso + +Set Jumphost PXE NIC. (set eth1 E.g.) + +E.g. + +.. code-block:: bash + + ########## Hardware Deploy Jumpserver PXE NIC ########## + # you need comment out it when virtual deploy + export INSTALL_NIC=eth1 + +Set scenario that you want to deploy + +E.g. + +nosdn-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +ocl-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml + +odl_l2-moon scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +odl_l2-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +odl_l3-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +onos-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml + +onos-sfc deploy scenario sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml + +2. Run ``run.sh`` + +.. code-block:: bash + + ./run.sh diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst index c0bcc6ce..6416e35d 100644 --- a/docs/installationprocedure/index.rst +++ b/docs/installationprocedure/index.rst @@ -1,13 +1,16 @@ .. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 -.. (c) <optionally add copywriters name> -************************************ -Compass4nfv Installation Instruction -************************************ +******************************************************** +OPNFV(Colorado) Compass4nfv Installation Instructions +******************************************************** .. toctree:: :numbered: - :maxdepth: 2 + :maxdepth: 4 + introduction.rst installation.instruction.rst + bmdeploy.rst + vmdeploy.rst + references.rst diff --git a/docs/installationprocedure/installation.instruction.rst b/docs/installationprocedure/installation.instruction.rst index 12c6a184..9e552494 100644 --- a/docs/installationprocedure/installation.instruction.rst +++ b/docs/installationprocedure/installation.instruction.rst @@ -1,4 +1,155 @@ .. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 - .. (c) <optionally add copywriters name> +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) +Compass4nfv configuration +========================= + +This document describes providing guidelines on how to install and +configure the Colorado release of OPNFV when using Compass as a +deployment tool including required software and hardware +configurations. + +Installation and configuration of host OS, OpenStack, OpenDaylight, +ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal +nodes. + +The audience of this document is assumed to have good knowledge in +networking and Unix/Linux administration. + + +Preconditions +------------- + +Before starting the installation of the Colorado release of OPNFV, +some planning must be done. + + +Retrieving the installation ISO image +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +First of all, The installation ISO is needed for deploying your OPNFV +environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS +and so on. + +The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_ + +The daily build ISO can be retrieved via OPNFV artifacts repository: + +http://artifacts.opnfv.org/ + +NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image. + +E.g. +compass4nfv/colorado/opnfv-2016-01-16_15-03-18.iso +compass4nfv/colorado/opnfv-2016-01-16_15-03-18.properties + +The name of iso image includes the time of iso building, you can get the daily +ISO according the building time. +The git url and sha1 of Compass4nfv are recorded in properties files, +According these, the corresponding deployment scripts can be retrieved. + + +Getting the deployment scripts +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To retrieve the repository of Compass4nfv on Jumphost use the following command: + +- git clone https://gerrit.opnfv.org/gerrit/compass4nfv + +NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY(Include subfolders). + +To get stable /colorado release, you can use the following command: + +- git checkout colorado.1.0 + +Setup Requirements +------------------ + +If you have only 1 Bare Metal server, Virtual deployment is recommended. if more +than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of +servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller, +1 for compute. + + +Jumphost Requirements +~~~~~~~~~~~~~~~~~~~~~ + +The Jumphost requirements are outlined below: + +1. Ubuntu 14.04 (Pre-installed). + +2. Root access. + +3. libvirt virtualization support. + +4. Minimum 2 NICs. + + - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) + + - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) + + - External Network (Optional: Internet access) + +5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment. + +6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk) + + +Bare Metal Node Requirements +---------------------------- + +Bare Metal nodes require: + +1. IPMI enabled on OOB interface for power control. + +2. BIOS boot priority should be PXE first then local hard disk. + +3. Minimum 3 NICs. + + - PXE installation Network (Broadcasting PXE request) + + - IPMI Network (Receiving IPMI command from Jumphost) + + - External Network (OpenStack mgmt/external/storage/tenant network) + + +Network Requirements +-------------------- + +Network requirements include: + +1. No DHCP or TFTP server running on networks used by OPNFV. + +2. 2-6 separate networks with connectivity between Jumphost and nodes. + + - PXE installation Network + + - IPMI Network + + - Openstack mgmt Network* + + - Openstack external Network* + + - Openstack tenant Network* + + - Openstack storage Network* + +3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). + +4. External network has Internet access, meaning a gateway and DNS availability. + +**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** +**NIC(Reconfigurated in network.yml).** + + +Execution Requirements (Bare Metal Only) +---------------------------------------- + +In order to execute a deployment, one must gather the following information: + +1. IPMI IP addresses of the nodes. + +2. IPMI login information for the nodes (user/pass). + +3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. diff --git a/docs/installationprocedure/introduction.rst b/docs/installationprocedure/introduction.rst new file mode 100644 index 00000000..d1c581e2 --- /dev/null +++ b/docs/installationprocedure/introduction.rst @@ -0,0 +1,35 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Abstract +======== + +This document describes how to install the Brahmaputra release of OPNFV when +using Compass4nfv as a deployment tool covering it's limitations, dependencies +and required system resources. + +Version history +=============== + ++--------------------+--------------------+--------------------+---------------------------+ +| **Date** | **Ver.** | **Author** | **Comment** | +| | | | | ++--------------------+--------------------+--------------------+---------------------------+ +| 2016-09-13 | 2.1.0 | Yuenan Li | Adjusted the docs | +| | | (HUAWEI) | structure | ++--------------------+--------------------+--------------------+---------------------------+ +| 2016-09-12 | 2.0.0 | Yuenan Li | Rewritten for | +| | | (HUAWEI) | Compass4nfv C release | ++--------------------+--------------------+--------------------+---------------------------+ +| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for | +| | | (HUAWEI) | Compass4nfv B release | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & | +| | | (HUAWEI) | formatting | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-09-12 | 0.0.1 | Chen Shuai | First draft | +| | | (HUAWEI) | | ++--------------------+--------------------+--------------------+---------------------------+ + + diff --git a/docs/installationprocedure/postinstall.rst b/docs/installationprocedure/postinstall.rst new file mode 100644 index 00000000..f9b7aa92 --- /dev/null +++ b/docs/installationprocedure/postinstall.rst @@ -0,0 +1,32 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 + +.. commented as there is no content for this file at this time. + +.. <Project> post installation procedures +.. ====================================== +.. Add a brief introduction to the methods of validating the installation +.. according to this specific installer or feature. + +.. Automated post installation activities +.. -------------------------------------- +.. Describe specific post installation activities performed by the OPNFV +.. deployment pipeline including testing activities and reports. Refer to +.. the relevant testing guides, results, and release notes. + +.. note: this section should be singular and derived from the test projects +.. once we have one test suite to run for all deploy tools. This is not the +.. case yet so each deploy tool will need to provide (hopefully very simillar) +.. documentation of this. + +.. <Project> post configuration procedures +.. --------------------------------------- +.. Describe any deploy tool or feature specific scripts, tests or procedures +.. that should be carried out on the deployment post install and configuration +.. in this section. + +.. Platform components validation +.. --------------------------------- +.. Describe any component specific validation procedures necessary for your +.. deployment tool in this section. + diff --git a/docs/installationprocedure/references.rst b/docs/installationprocedure/references.rst new file mode 100644 index 00000000..467bf08d --- /dev/null +++ b/docs/installationprocedure/references.rst @@ -0,0 +1,38 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +References +========== + +OPNFV +----- + +`OPNFV Home Page <www.opnfv.org>`_ + +`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_ + +`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_ + +OpenStack +--------- + +`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_ + +`OpenStack documentation <http://docs.openstack.org>`_ + +OpenDaylight +------------ + +`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_ + +ONOS +---- + +`ONOS artifacts <http://onosproject.org/software/>`_ + +Compass +------- + +`Compass Home Page <http://www.syscompass.org/>`_ + diff --git a/docs/installationprocedure/vmdeploy.rst b/docs/installationprocedure/vmdeploy.rst new file mode 100644 index 00000000..cb5df6fb --- /dev/null +++ b/docs/installationprocedure/vmdeploy.rst @@ -0,0 +1,260 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Installation Guide (Virtual Deployment) +======================================= + +Nodes Configuration (Virtual Deployment) +---------------------------------------- + +The below file is the inventory template of deployment nodes: + +"./deploy/conf/vm_environment/huawei-virtual1/network.yml" + +You can write your own address/roles reference to it. + + - name -- Host name for deployment node after installation. + + - roles -- Components deployed. + +**Set TYPE and FLAVOR** + +E.g. + +.. code-block:: yaml + + TYPE: virtual + FLAVOR: cluster + +**Assignment of different roles to servers** + +E.g. Openstack only deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + + - name: host2 + roles: + - compute + +NOTE: +IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. + +E.g. Openstack and ceph deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - ceph-adm + - ceph-mon + + - name: host2 + roles: + - compute + - ceph-osd + +E.g. Openstack and ODL deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - odl + + - name: host2 + roles: + - compute + +E.g. Openstack and ONOS deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - onos + + - name: host2 + roles: + - compute + +Network Configuration (Virtual Deployment) +------------------------------------------ + +Before deployment, there are some network configuration to be checked based +on your network topology.Compass4nfv network default configuration file is +"compass4nfv/deploy/conf/vm_environment/huawei-virtual1/network.yml". +You can write your own reference to it. + +**The following figure shows the default network configuration.** + +.. code-block:: console + + + +--+ +--+ + | | | | + | | +------------+ | | + | +------+ Jumphost +------+ | + | | +------+-----+ | | + | | | | | + | | +------------+ | + | | | | + | | +------------+ | | + | +------+ host1 +------+ | + | | +------+-----+ | | + | | | | | + | | +------------+ | + | | | | + | | +------------+ | | + | +------+ host2 +------+ | + | | +------+-----+ | | + | | | | | + | | +------------+ | + | | | | + | | +------------+ | | + | +------+ host3 +------+ | + | | +------+-----+ | | + | | | | | + | | +------------+ | + | | | | + | | | | + +-++ ++-+ + ^ ^ + | | + | | + +-+-------------------------+ | + | External Network | | + +---------------------------+ | + +-----------------------+---+ + | Installation Network | + +---------------------------+ + +Start Deployment (Virtual Deployment) +------------------------------------- + +1. Edit run.sh + +Set OS version and OpenStack version for deployment nodes. + Compass4nfv Colorado supports three OS version based openstack mitaka. + +E.g. + +.. code-block:: bash + + ########## Ubuntu14.04 Mitaka ########## + export OS_VERSION=trusty + export OPENSTACK_VERSION=mitaka + + ########## Ubuntu16.04 Mitaka ########## + # export OS_VERSION=xenial + # export OPENSTACK_VERSION=mitaka_xenial + + ########## Centos7 Mitaka ########## + # export OS_VERSION=centos7 + # export OPENSTACK_VERSION=mitaka + +Set ISO image that you want to deploy + +E.g. + +.. code-block:: bash + + # ISO_URL is your iso's absolute path + # export ISO_URL=file:///home/compass/compass4nfv.iso + # or + # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso + +Set scenario that you want to deploy + +E.g. + +nosdn-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-nosdn-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml + +ocl-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-ocl-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_ocl.yml + +odl_l2-moon scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-odl_l2-moon-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml + +odl_l2-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-odl_l2-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml + +odl_l3-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-odl_l3-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml + +onos-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-onos-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml + +onos-sfc deploy scenario sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/vm_environment/os-onos-sfc-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml + +2. Run ``run.sh`` + +.. code-block:: bash + + ./run.sh |