summaryrefslogtreecommitdiffstats
path: root/docs/installationprocedure
diff options
context:
space:
mode:
Diffstat (limited to 'docs/installationprocedure')
-rw-r--r--docs/installationprocedure/bmdeploy.rst328
-rw-r--r--docs/installationprocedure/index.rst16
-rw-r--r--docs/installationprocedure/installation.instruction.rst154
-rw-r--r--docs/installationprocedure/introduction.rst35
-rw-r--r--docs/installationprocedure/postinstall.rst32
-rw-r--r--docs/installationprocedure/references.rst38
-rw-r--r--docs/installationprocedure/vmdeploy.rst260
7 files changed, 863 insertions, 0 deletions
diff --git a/docs/installationprocedure/bmdeploy.rst b/docs/installationprocedure/bmdeploy.rst
new file mode 100644
index 00000000..6ec70fa4
--- /dev/null
+++ b/docs/installationprocedure/bmdeploy.rst
@@ -0,0 +1,328 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Installation Guide (Bare Metal Deployment)
+==========================================
+
+Nodes Configuration (Bare Metal Deployment)
+-------------------------------------------
+
+The below file is the inventory template of deployment nodes:
+
+"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml"
+
+You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
+
+ - name -- Host name for deployment node after installation.
+
+ - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
+ or IPMI 2.0 is available.
+
+ - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
+ from Jumphost.
+
+ - ipmiUser -- IPMI Username for deployment node.
+
+ - ipmiPass -- IPMI Password for deployment node.
+
+ - mac -- MAC Address of deployment node PXE NIC .
+
+ - roles -- Components deployed.
+
+**Set TYPE/FLAVOR and POWER TOOL**
+
+E.g.
+.. code-block:: yaml
+
+ TYPE: baremetal
+ FLAVOR: cluster
+ POWER_TOOL: ipmitool
+
+**Set ipmiUser/ipmiPass and ipmiVer**
+
+E.g.
+
+.. code-block:: yaml
+
+ ipmiUser: USER
+ ipmiPass: PASSWORD
+ ipmiVer: '2.0'
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+NOTE:
+IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - ceph-adm
+ - ceph-mon
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+ - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - odl
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ mac: 'F8:4A:BF:55:A2:8D'
+ interfaces:
+ - eth1: 'F8:4A:BF:55:A2:8E'
+ ipmiIp: 172.16.130.26
+ roles:
+ - controller
+ - ha
+ - onos
+
+ - name: host2
+ mac: 'D8:49:0B:DA:5A:B7'
+ interfaces:
+ - eth1: 'D8:49:0B:DA:5A:B8'
+ ipmiIp: 172.16.130.27
+ roles:
+ - compute
+
+Network Configuration (Bare Metal Deployment)
+---------------------------------------------
+
+Before deployment, there are some network configuration to be checked based
+on your network topology.Compass4nfv network default configuration file is
+"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml".
+You can write your own reference to it.
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+ +--+ +--+ +--+
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ Jumphost +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host1 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host2 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host3 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | | | | |
+ +-++ ++-+ +-++
+ ^ ^ ^
+ | | |
+ | | |
+ +-+-------------------------+ | |
+ | External Network | | |
+ +---------------------------+ | |
+ +-----------------------+---+ |
+ | IPMI Network | |
+ +---------------------------+ |
+ +-------------------------+-+
+ | PXE(Installation) Network |
+ +---------------------------+
+
+
+Start Deployment (Bare Metal Deployment)
+----------------------------------------
+
+1. Edit run.sh
+
+Set OS version and OpenStack version for deployment nodes.
+ Compass4nfv Colorado supports three OS version based openstack mitaka.
+
+E.g.
+
+.. code-block:: bash
+
+ ########## Ubuntu14.04 Mitaka ##########
+ export OS_VERSION=trusty
+ export OPENSTACK_VERSION=mitaka
+
+ ########## Ubuntu16.04 Mitaka ##########
+ # export OS_VERSION=xenial
+ # export OPENSTACK_VERSION=mitaka_xenial
+
+ ########## Centos7 Mitaka ##########
+ # export OS_VERSION=centos7
+ # export OPENSTACK_VERSION=mitaka
+
+Set ISO image that you want to deploy
+
+E.g.
+
+.. code-block:: bash
+
+ # ISO_URL is your iso's absolute path
+ export ISO_URL=file:///home/compass/compass4nfv.iso
+ # or
+ # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
+
+Set Jumphost PXE NIC. (set eth1 E.g.)
+
+E.g.
+
+.. code-block:: bash
+
+ ########## Hardware Deploy Jumphost PXE NIC ##########
+ # you need comment out it when virtual deploy
+ export INSTALL_NIC=eth1
+
+Set scenario that you want to deploy
+
+E.g.
+
+nosdn-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+ocl-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml
+
+odl_l2-moon scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+odl_l2-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+odl_l3-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml
+
+onos-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
+onos-sfc deploy scenario sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml
+
+2. Run ``run.sh``
+
+.. code-block:: bash
+
+ ./run.sh
diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst
new file mode 100644
index 00000000..6416e35d
--- /dev/null
+++ b/docs/installationprocedure/index.rst
@@ -0,0 +1,16 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+********************************************************
+OPNFV(Colorado) Compass4nfv Installation Instructions
+********************************************************
+
+.. toctree::
+ :numbered:
+ :maxdepth: 4
+
+ introduction.rst
+ installation.instruction.rst
+ bmdeploy.rst
+ vmdeploy.rst
+ references.rst
diff --git a/docs/installationprocedure/installation.instruction.rst b/docs/installationprocedure/installation.instruction.rst
new file mode 100644
index 00000000..87c8a55c
--- /dev/null
+++ b/docs/installationprocedure/installation.instruction.rst
@@ -0,0 +1,154 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Compass4nfv configuration
+=========================
+
+This document describes providing guidelines on how to install and
+configure the Colorado release of OPNFV when using Compass as a
+deployment tool including required software and hardware
+configurations.
+
+Installation and configuration of host OS, OpenStack, OpenDaylight,
+ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
+nodes.
+
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
+
+
+Preconditions
+-------------
+
+Before starting the installation of the Colorado release of OPNFV,
+some planning must be done.
+
+
+Retrieving the installation ISO image
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+First of all, The installation ISO is needed for deploying your OPNFV
+environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
+and so on.
+
+The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
+
+The daily build ISO can be retrieved via OPNFV artifacts repository:
+
+http://artifacts.opnfv.org/compass4nfv.html
+
+NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image.
+
+E.g.
+compass4nfv/colorado/opnfv-2016-09-18_08-15-13.iso
+
+The name of iso image includes the time of iso building, you can get the daily
+ISO according the building time.
+The git url and sha1 of Compass4nfv are recorded in properties files,
+According these, the corresponding deployment scripts can be retrieved.
+
+
+Getting the deployment scripts
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To retrieve the repository of Compass4nfv on Jumphost use the following command:
+
+- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
+
+NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
+
+To get stable /colorado release, you can use the following command:
+
+- git checkout colorado.1.0
+
+Setup Requirements
+------------------
+
+If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
+than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
+servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
+1 for compute.
+
+
+Jumphost Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+The Jumphost requirements are outlined below:
+
+1. Ubuntu 14.04 (Pre-installed).
+
+2. Root access.
+
+3. libvirt virtualization support.
+
+4. Minimum 2 NICs.
+
+ - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
+
+ - IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
+
+ - External Network (Optional: Internet access)
+
+5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
+
+6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk)
+
+
+Bare Metal Node Requirements
+----------------------------
+
+Bare Metal nodes require:
+
+1. IPMI enabled on OOB interface for power control.
+
+2. BIOS boot priority should be PXE first then local hard disk.
+
+3. Minimum 3 NICs.
+
+ - PXE installation Network (Broadcasting PXE request)
+
+ - IPMI Network (Receiving IPMI command from Jumphost)
+
+ - External Network (OpenStack mgmt/external/storage/tenant network)
+
+
+Network Requirements
+--------------------
+
+Network requirements include:
+
+1. No DHCP or TFTP server running on networks used by OPNFV.
+
+2. 2-6 separate networks with connectivity between Jumphost and nodes.
+
+ - PXE installation Network
+
+ - IPMI Network
+
+ - Openstack mgmt Network*
+
+ - Openstack external Network*
+
+ - Openstack tenant Network*
+
+ - Openstack storage Network*
+
+3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
+
+4. External network has Internet access, meaning a gateway and DNS availability.
+
+**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
+**NIC(Reconfigurated in network.yml).**
+
+
+Execution Requirements (Bare Metal Only)
+----------------------------------------
+
+In order to execute a deployment, one must gather the following information:
+
+1. IPMI IP addresses of the nodes.
+
+2. IPMI login information for the nodes (user/pass).
+
+3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
diff --git a/docs/installationprocedure/introduction.rst b/docs/installationprocedure/introduction.rst
new file mode 100644
index 00000000..835a5788
--- /dev/null
+++ b/docs/installationprocedure/introduction.rst
@@ -0,0 +1,35 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Abstract
+========
+
+This document describes how to install the Colorado release of OPNFV when
+using Compass4nfv as a deployment tool covering it's limitations, dependencies
+and required system resources.
+
+Version history
+===============
+
++--------------------+--------------------+--------------------+---------------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+---------------------------+
+| 2016-09-13 | 2.1.0 | Yuenan Li | Adjusted the docs |
+| | | (HUAWEI) | structure |
++--------------------+--------------------+--------------------+---------------------------+
+| 2016-09-12 | 2.0.0 | Yuenan Li | Rewritten for |
+| | | (HUAWEI) | Compass4nfv C release |
++--------------------+--------------------+--------------------+---------------------------+
+| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for |
+| | | (HUAWEI) | Compass4nfv B release |
++--------------------+--------------------+--------------------+---------------------------+
+| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & |
+| | | (HUAWEI) | formatting |
++--------------------+--------------------+--------------------+---------------------------+
+| 2015-09-12 | 0.0.1 | Chen Shuai | First draft |
+| | | (HUAWEI) | |
++--------------------+--------------------+--------------------+---------------------------+
+
+
diff --git a/docs/installationprocedure/postinstall.rst b/docs/installationprocedure/postinstall.rst
new file mode 100644
index 00000000..f9b7aa92
--- /dev/null
+++ b/docs/installationprocedure/postinstall.rst
@@ -0,0 +1,32 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+
+.. commented as there is no content for this file at this time.
+
+.. <Project> post installation procedures
+.. ======================================
+.. Add a brief introduction to the methods of validating the installation
+.. according to this specific installer or feature.
+
+.. Automated post installation activities
+.. --------------------------------------
+.. Describe specific post installation activities performed by the OPNFV
+.. deployment pipeline including testing activities and reports. Refer to
+.. the relevant testing guides, results, and release notes.
+
+.. note: this section should be singular and derived from the test projects
+.. once we have one test suite to run for all deploy tools. This is not the
+.. case yet so each deploy tool will need to provide (hopefully very simillar)
+.. documentation of this.
+
+.. <Project> post configuration procedures
+.. ---------------------------------------
+.. Describe any deploy tool or feature specific scripts, tests or procedures
+.. that should be carried out on the deployment post install and configuration
+.. in this section.
+
+.. Platform components validation
+.. ---------------------------------
+.. Describe any component specific validation procedures necessary for your
+.. deployment tool in this section.
+
diff --git a/docs/installationprocedure/references.rst b/docs/installationprocedure/references.rst
new file mode 100644
index 00000000..c7ede9c8
--- /dev/null
+++ b/docs/installationprocedure/references.rst
@@ -0,0 +1,38 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+References
+==========
+
+OPNFV
+-----
+
+`OPNFV Home Page <www.opnfv.org>`_
+
+`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_
+
+`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
+
+OpenStack
+---------
+
+`OpenStack Mitaka Release artifacts <http://www.openstack.org/software/mitaka>`_
+
+`OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+ONOS
+----
+
+`ONOS artifacts <http://onosproject.org/software/>`_
+
+Compass
+-------
+
+`Compass Home Page <http://www.syscompass.org/>`_
+
diff --git a/docs/installationprocedure/vmdeploy.rst b/docs/installationprocedure/vmdeploy.rst
new file mode 100644
index 00000000..cb5df6fb
--- /dev/null
+++ b/docs/installationprocedure/vmdeploy.rst
@@ -0,0 +1,260 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Installation Guide (Virtual Deployment)
+=======================================
+
+Nodes Configuration (Virtual Deployment)
+----------------------------------------
+
+The below file is the inventory template of deployment nodes:
+
+"./deploy/conf/vm_environment/huawei-virtual1/network.yml"
+
+You can write your own address/roles reference to it.
+
+ - name -- Host name for deployment node after installation.
+
+ - roles -- Components deployed.
+
+**Set TYPE and FLAVOR**
+
+E.g.
+
+.. code-block:: yaml
+
+ TYPE: virtual
+ FLAVOR: cluster
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+
+ - name: host2
+ roles:
+ - compute
+
+NOTE:
+IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - ceph-adm
+ - ceph-mon
+
+ - name: host2
+ roles:
+ - compute
+ - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - odl
+
+ - name: host2
+ roles:
+ - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - onos
+
+ - name: host2
+ roles:
+ - compute
+
+Network Configuration (Virtual Deployment)
+------------------------------------------
+
+Before deployment, there are some network configuration to be checked based
+on your network topology.Compass4nfv network default configuration file is
+"compass4nfv/deploy/conf/vm_environment/huawei-virtual1/network.yml".
+You can write your own reference to it.
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+ +--+ +--+
+ | | | |
+ | | +------------+ | |
+ | +------+ Jumphost +------+ |
+ | | +------+-----+ | |
+ | | | | |
+ | | +------------+ |
+ | | | |
+ | | +------------+ | |
+ | +------+ host1 +------+ |
+ | | +------+-----+ | |
+ | | | | |
+ | | +------------+ |
+ | | | |
+ | | +------------+ | |
+ | +------+ host2 +------+ |
+ | | +------+-----+ | |
+ | | | | |
+ | | +------------+ |
+ | | | |
+ | | +------------+ | |
+ | +------+ host3 +------+ |
+ | | +------+-----+ | |
+ | | | | |
+ | | +------------+ |
+ | | | |
+ | | | |
+ +-++ ++-+
+ ^ ^
+ | |
+ | |
+ +-+-------------------------+ |
+ | External Network | |
+ +---------------------------+ |
+ +-----------------------+---+
+ | Installation Network |
+ +---------------------------+
+
+Start Deployment (Virtual Deployment)
+-------------------------------------
+
+1. Edit run.sh
+
+Set OS version and OpenStack version for deployment nodes.
+ Compass4nfv Colorado supports three OS version based openstack mitaka.
+
+E.g.
+
+.. code-block:: bash
+
+ ########## Ubuntu14.04 Mitaka ##########
+ export OS_VERSION=trusty
+ export OPENSTACK_VERSION=mitaka
+
+ ########## Ubuntu16.04 Mitaka ##########
+ # export OS_VERSION=xenial
+ # export OPENSTACK_VERSION=mitaka_xenial
+
+ ########## Centos7 Mitaka ##########
+ # export OS_VERSION=centos7
+ # export OPENSTACK_VERSION=mitaka
+
+Set ISO image that you want to deploy
+
+E.g.
+
+.. code-block:: bash
+
+ # ISO_URL is your iso's absolute path
+ # export ISO_URL=file:///home/compass/compass4nfv.iso
+ # or
+ # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso
+
+Set scenario that you want to deploy
+
+E.g.
+
+nosdn-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-nosdn-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+ocl-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-ocl-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_ocl.yml
+
+odl_l2-moon scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-odl_l2-moon-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+odl_l2-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-odl_l2-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+odl_l3-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-odl_l3-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network.yml
+
+onos-nofeature scenario deploy sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-onos-nofeature-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
+
+onos-sfc deploy scenario sample
+
+.. code-block:: bash
+
+ # DHA is your dha.yml's path
+ export DHA=./deploy/conf/vm_environment/os-onos-sfc-ha.yml
+
+ # NETWORK is your network.yml's path
+ export NETWORK=./deploy/conf/vm_environment/huawei-virtual1/network_onos.yml
+
+2. Run ``run.sh``
+
+.. code-block:: bash
+
+ ./run.sh