summaryrefslogtreecommitdiffstats
path: root/docs/installationprocedure/installation.instruction.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/installationprocedure/installation.instruction.rst')
-rw-r--r--docs/installationprocedure/installation.instruction.rst154
1 files changed, 0 insertions, 154 deletions
diff --git a/docs/installationprocedure/installation.instruction.rst b/docs/installationprocedure/installation.instruction.rst
deleted file mode 100644
index 87c8a55c..00000000
--- a/docs/installationprocedure/installation.instruction.rst
+++ /dev/null
@@ -1,154 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-
-Compass4nfv configuration
-=========================
-
-This document describes providing guidelines on how to install and
-configure the Colorado release of OPNFV when using Compass as a
-deployment tool including required software and hardware
-configurations.
-
-Installation and configuration of host OS, OpenStack, OpenDaylight,
-ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal
-nodes.
-
-The audience of this document is assumed to have good knowledge in
-networking and Unix/Linux administration.
-
-
-Preconditions
--------------
-
-Before starting the installation of the Colorado release of OPNFV,
-some planning must be done.
-
-
-Retrieving the installation ISO image
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-First of all, The installation ISO is needed for deploying your OPNFV
-environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS
-and so on.
-
-The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_
-
-The daily build ISO can be retrieved via OPNFV artifacts repository:
-
-http://artifacts.opnfv.org/compass4nfv.html
-
-NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image.
-
-E.g.
-compass4nfv/colorado/opnfv-2016-09-18_08-15-13.iso
-
-The name of iso image includes the time of iso building, you can get the daily
-ISO according the building time.
-The git url and sha1 of Compass4nfv are recorded in properties files,
-According these, the corresponding deployment scripts can be retrieved.
-
-
-Getting the deployment scripts
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-To retrieve the repository of Compass4nfv on Jumphost use the following command:
-
-- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
-
-NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN ROOT DIRECTORY(INCLUDE SUBFOLDERS).
-
-To get stable /colorado release, you can use the following command:
-
-- git checkout colorado.1.0
-
-Setup Requirements
-------------------
-
-If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
-than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
-servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
-1 for compute.
-
-
-Jumphost Requirements
-~~~~~~~~~~~~~~~~~~~~~
-
-The Jumphost requirements are outlined below:
-
-1. Ubuntu 14.04 (Pre-installed).
-
-2. Root access.
-
-3. libvirt virtualization support.
-
-4. Minimum 2 NICs.
-
- - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
-
- - IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
-
- - External Network (Optional: Internet access)
-
-5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment.
-
-6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk)
-
-
-Bare Metal Node Requirements
-----------------------------
-
-Bare Metal nodes require:
-
-1. IPMI enabled on OOB interface for power control.
-
-2. BIOS boot priority should be PXE first then local hard disk.
-
-3. Minimum 3 NICs.
-
- - PXE installation Network (Broadcasting PXE request)
-
- - IPMI Network (Receiving IPMI command from Jumphost)
-
- - External Network (OpenStack mgmt/external/storage/tenant network)
-
-
-Network Requirements
---------------------
-
-Network requirements include:
-
-1. No DHCP or TFTP server running on networks used by OPNFV.
-
-2. 2-6 separate networks with connectivity between Jumphost and nodes.
-
- - PXE installation Network
-
- - IPMI Network
-
- - Openstack mgmt Network*
-
- - Openstack external Network*
-
- - Openstack tenant Network*
-
- - Openstack storage Network*
-
-3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
-
-4. External network has Internet access, meaning a gateway and DNS availability.
-
-**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
-**NIC(Reconfigurated in network.yml).**
-
-
-Execution Requirements (Bare Metal Only)
-----------------------------------------
-
-In order to execute a deployment, one must gather the following information:
-
-1. IPMI IP addresses of the nodes.
-
-2. IPMI login information for the nodes (user/pass).
-
-3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.