diff options
Diffstat (limited to 'docs/installation-instructions/installation-instructions.rst')
| -rw-r--r-- | docs/installation-instructions/installation-instructions.rst | 407 |
1 files changed, 0 insertions, 407 deletions
diff --git a/docs/installation-instructions/installation-instructions.rst b/docs/installation-instructions/installation-instructions.rst deleted file mode 100644 index 7fc3135a..00000000 --- a/docs/installation-instructions/installation-instructions.rst +++ /dev/null @@ -1,407 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) - -========================================================================================================== -Installation instructions for the Brahmaputra release of OPNFV when using Compass4nfv as a deployment tool -========================================================================================================== - - -.. contents:: Table of Contents - :backlinks: none - - -Abstract -======== - -This document describes how to install the Brahmaputra release of OPNFV when -using Compass4nfv as a deployment tool covering it's limitations, dependencies -and required system resources. - -Version history -=============== - -+--------------------+--------------------+--------------------+---------------------------+ -| **Date** | **Ver.** | **Author** | **Comment** | -| | | | | -+--------------------+--------------------+--------------------+---------------------------+ -| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for | -| | | (HUAWEI) | Compass4nfv B release | -+--------------------+--------------------+--------------------+---------------------------+ -| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & | -| | | (HUAWEI) | formatting | -+--------------------+--------------------+--------------------+---------------------------+ -| 2015-09-12 | 0.0.1 | Chen Shuai | First draft | -| | | (HUAWEI) | | -+--------------------+--------------------+--------------------+---------------------------+ - -Introduction -============ - -This document describes providing guidelines on how to install and -configure the Brahmaputra release of OPNFV when using Compass as a -deployment tool including required software and hardware -configurations. - -Installation and configuration of host OS, OpenStack, OpenDaylight, -ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal -nodes. - -The audience of this document is assumed to have good knowledge in -networking and Unix/Linux administration. - -Preface -======= - -Before starting the installation of the Brahmaputra release of OPNFV -when using Compass4nfv as a deployment tool, some planning must be done. - - -Retrieving the installation ISO image -------------------------------------- - -First of all, The installation ISO is needed for deploying your OPNFV -environment, it included packages of Compass,OpenStack,OpenDaylight,ONOS -and so on. the iso can be retrieved via OPNFV artifacts repository: - -http://artifacts.opnfv.org/ - -NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image. - -E.g. -compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso -compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties - -The name of iso image includes the time of iso building. -The git url and sha1 of Compass4nfv are recorded in properties files, -According these, the corresponding deployment scripts can be retrieved. - - -Getting the deployment scripts ------------------------------- - -To retrieve the repository of Compass4nfv on Jumphost use the following command: - -- git clone https://gerrit.opnfv.org/gerrit/compass4nfv - -NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY. - -If you don't have a Linux foundation user id, get your own by the url: - -https://wiki.opnfv.org/developer/getting_started - -Set the branch to the corresponding deployment scripts: - -E.g. -Git sha1 in file "opnfv-2016-01-16_15-03-18.properties" is -d5a13ce7cc2ce89946d34b0402ecf33c1d291851 - -- git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851 - - -Preparing the installation environment --------------------------------------- - -If you have only 1 Bare Metal server, Virtual deployment is recommended. if more -than or equal 3 servers, the Bare Metal deployment is recommended. The minimum of Bare Metal -deployment server is 3, 1 for JumpServer(Jumphost), 1 for controller, 1 for computer. - - -Setup Requirements -================== - -Jumphost Requirements ---------------------- - -The Jumphost requirements are outlined below: - -1. Ubuntu 14.04 (Pre-installed). - -2. Root access. - -3. libvirt virtualization support. - -4. Minimum 2 NICs. - - - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) - - - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) - - - External Network (Optional: Internet access) - -5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment. - -6. Minimum 100G storage. - -Bare Metal Node Requirements ----------------------------- - -Bare Metal nodes require: - -1. IPMI enabled on OOB interface for power control. - -2. BIOS boot priority should be PXE first then local hard disk. - -3. Minimum 3 NICs. - - - PXE installation Network (Broadcasting PXE request) - - - IPMI Network (Receiving IPMI command from Jumphost) - - - External Network (OpenStack mgmt/external/storage/tenant network) - -Network Requirements --------------------- - -Network requirements include: - -1. No DHCP or TFTP server running on networks used by OPNFV. - -2. 2-6 separate networks with connectivity between Jumphost and nodes. - - - PXE installation Network - - - IPMI Network - - - Openstack mgmt Network* - - - Openstack external Network* - - - Openstack tenant Network* - - - Openstack storage Network* - -3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). - -4. External network has Internet access, meaning a gateway and DNS availability. - -**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** -**NIC(Reconfigurated in network.yml).** - -Execution Requirements (Bare Metal Only) ----------------------------------------- - -In order to execute a deployment, one must gather the following information: - -1. IPMI IP addresses for the nodes. - -2. IPMI login information for the nodes (user/pass). - -3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. - - -Installation Guide (BM Deployment) -================================== - -Nodes Configuration -------------------- - -The bellow file is the inventory template of deployment nodes: - -"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml" - -You can write your own IPMI IP/User/Password/Mac address/roles reference to it. - - - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 - or IPMI 2.0 is available. - - - ipmiIP -- IPMI IP address for deployment node. Make sure it can access - from Jumphost. - - - ipmiUser -- IPMI Username for deployment node. - - - ipmiPass -- IPMI Password for deployment node. - - - mac -- MAC Address of deployment node PXE NIC . - - - name -- Host name for deployment node after installation. - - - roles -- Components deployed. - -E.g. Openstack only deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - - name: host2 - roles: - - compute - -NOTE: -IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. - -E.g. Openstack and ceph deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - ceph-admin - - ceph-mon - - - name: host2 - roles: - - compute - - ceph-osd - -E.g. Openstack and ODL deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - odl - - - name: host2 - roles: - - compute - -E.g. Openstack and ONOS deployment roles setting - -.. code-block:: yaml - - hosts: - - name: host1 - roles: - - controller - - ha - - onos - - - name: host2 - roles: - - compute - - -Network Configuration ---------------------- - -Before deployment, there are some network configuration to be checked based on your network topology. -Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". -You can write your own reference to it. - -Start Deployment ----------------- - -1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.) - -.. code-block:: bash - - export INSTALL_NIC=eth1 - -2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) - -.. code-block:: bash - - export OS_VERSION=trusty - -3. Set OpenStack version for deployment nodes. (set liberty E.g.) - -.. code-block:: bash - - export OPENSTACK_VERSION=liberty - -4. Set ISO image that you want to deploy - -.. code-block:: bash - - export ISO_URL=file:///${YOUR_OWN}/compass.iso - or - export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso - -5. Run ``deploy.sh`` with inventory and network configuration - -.. code-block:: bash - - ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml - - -Installation Guide (VM Deployment) -================================== - -Nodes Configuration -------------------- - -Please follow the instructions in section `Installation Guide (BM Deployment)`, -and no need to set IPMI/PXE/MAC parameters. - -Network Configuration ---------------------- - -Please follow the instructions in section `Installation Guide (BM Deployment)`. - -Start Deployment ----------------- - -1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) - -.. code-block:: bash - - export OS_VERSION=trusty - -3. Set OpenStack version for deployment nodes. (set liberty E.g.) - -.. code-block:: bash - - export OPENSTACK_VERSION=liberty - -4. Set ISO image that you want to deploy - -.. code-block:: bash - - export ISO_URL=file:///${YOUR_OWN}/compass.iso - or - export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso - -5. Run ``deploy.sh`` with inventory and network configuration - -.. code-block:: bash - - ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml - -References -========== - -OPNFV ------ - -`OPNFV Home Page <www.opnfv.org>`_ - -`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_ - -`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_ - -OpenStack ---------- - -`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_ - -`OpenStack documentation <http://docs.openstack.org>`_ - -OpenDaylight ------------- - -`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_ - -ONOS ----- - -`ONOS artifacts <http://onosproject.org/software/>`_ - -Compass -------- - -`Compass Home Page <http://www.syscompass.org/>`_ - -:Authors: Justin Chi (HUAWEI) - |