diff options
Diffstat (limited to 'docs/how-to-use-compass4nfv')
| -rw-r--r-- | docs/how-to-use-compass4nfv/compass4nfv_host_network.png | bin | 36846 -> 0 bytes | |||
| -rw-r--r-- | docs/how-to-use-compass4nfv/compass4nfv_network_topology.png | bin | 155268 -> 0 bytes | |||
| -rw-r--r-- | docs/how-to-use-compass4nfv/documentation-compass4nfv.rst | 546 | ||||
| -rw-r--r-- | docs/how-to-use-compass4nfv/index.rst | 13 |
4 files changed, 0 insertions, 559 deletions
diff --git a/docs/how-to-use-compass4nfv/compass4nfv_host_network.png b/docs/how-to-use-compass4nfv/compass4nfv_host_network.png Binary files differdeleted file mode 100644 index 93ba8c0b..00000000 --- a/docs/how-to-use-compass4nfv/compass4nfv_host_network.png +++ /dev/null diff --git a/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png b/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png Binary files differdeleted file mode 100644 index 6360b8a5..00000000 --- a/docs/how-to-use-compass4nfv/compass4nfv_network_topology.png +++ /dev/null diff --git a/docs/how-to-use-compass4nfv/documentation-compass4nfv.rst b/docs/how-to-use-compass4nfv/documentation-compass4nfv.rst deleted file mode 100644 index 7fbd1578..00000000 --- a/docs/how-to-use-compass4nfv/documentation-compass4nfv.rst +++ /dev/null @@ -1,546 +0,0 @@ -.. two dots create a comment. please leave this logo at the top of each of your rst files. - -Prerequisite -============ - -1. One jumpserver installed with Ubuntu14.04. - - -2. If baremetal is targeted deployment environment, we suggest the environment as the following topology picture, -jumpserver and baremetal need 3 ethernet ports, one ports(External/Tenant) connects to one switch, -and two ports (IPMI/BMC, PXE/Installation) connects to another switch. - -.. image:: compass4nfv_network_topology.png - :height: 400 - :width: 700 - :alt: OPNFV - :align: left - -If jumpserver doesn't have enough ethernet ports, two ports is -also acceptable(IPMI/BMC and PXE/Installation run through one ethernet port). - -If switches are not enough, one switch with 2 VLANs is also acceptable. - - -3. Pre-allocate BMC IP addresses for baremetals, and get accounts and passwords of BMC on baremetals. - - -4. If virtual machines is targeted deployment environment, the jumpserver also needs 100G storage and 16G RAM. - - -5. Gerrit: git clone https://gerrit.opnfv.org/gerrit/compass4nfv to the jumpserver. - - -6. Please don't git clone compass4nfv in the root directory. - - -Attention: Compass4nfv does stick on the OPNFV communities' Operating System version requirement. -For Brahmaputra, Ubuntu14.04 or newer and Centos7.0 or newer are requested, -so the targeted deployment environment will be installed on Ubuntu14.04 or Centos7.1. - - - -How to build a customized ISO -============================= - -If you want to use Compass4nfv official ISO to deploy the environment, you can jump over this section. - - -This section indicates how to add additional packages and how to build a new compass4nfv ISO file -so that Compass4nfv would install the additional packages automatically during the deployment. - - -* Approach 1 ----- apt/yum installation: - - -1. Confirm the targeted packages could be installed via apt-get(Ubuntu) and yum(Centos), -you can verify on your own environment first by commands -"apt-get install {targeted packages}" on Ubuntu and "yum install {targeted packages}" on Centos. - - -2. Create a new role folder ({newrole}) in the compass4nfv/deploy/adapters/ansible/roles/, -create a new folder named "vars" in the new role folder({newrole}), -and create a file named "main.yml" and add "---" at the head of this file. - - -3. If the targeted packages names are same in both Ubuntu and Centos, you just need edit main.yml. - -Add the packages' names as following: - -.. code-block:: bash - - packages_noarch: - - {targeted packages1} - - {targeted packages2} - - {targeted packages3} - ... - - -4. If the targeted packages' names are different in Ubuntu and Centos, -you need create "Debian.yml" and/or "RedHat.yml" in the same folder as "main.yml" and add "---" at the head of the files. - -Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" : - -.. code-block:: bash - - --- - packages: - - {targeted Ubuntu/RedHat packages1} - - {targeted Ubuntu/RedHat packages2} - - {targeted Ubuntu/RedHat packages3} - ... - - -Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example. - - -5.1 Add the new role to ansible so that Compass4nfv will install the packages during the deployment : -"enter compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml and/or single-controller.yml, -add {newrole} at an appropriate position, please be aware of that compass4nfv deploys the roles -in the order as list in HA-ansible-multinodes.yml/single-controller.yml, you can add a new section as the following:: - - - hosts: all/controller/compute/ha - remote_user: root - sudo: True - roles: - - {newrole} - -The first line "hosts" of the section means compass4nfv will deploy {newrole} on which baremetals/VMs, -"all" means it deploys on all baremetals/VMs, "controller" means it deploys on all controller and so on. - -Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml. - - -Attention - "HA-ansible-multinodes.yml" deploys controllers backup targeted environment -and 3 controllers in backup mode + 2 compute by default;. - "single-controller.yml" deploys 1 controller + 4 compute. - - -5.2 Or insert the new role into the existing section at an appropriate position in -HA-ansible-multinodes.yml and single-controller.yml. - - Example: - -.. code-block:: bash - - - hosts: controller/all/compute/ha - remote_user: root - sudo: True - roles: - - database - - mq - - keystone - - nova-controller - - neutron-controller - - {newrole} - -Please pay attention to the first line "hosts" by which Compass4nfv deploys {newrole} on which baremetals/VMs. - -Also please pay attention to the position inserted as Compass4nfv deploys the packages in the order as list. - -Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml. - - -6. Run compass4nfv/build/make_repo.sh. - - -7. After 6 finishs, please check "compass4nfv/work/repo/" folder, -if files as following exist in the folder, that means building packages successfully. - -centos7-juno-ppa.tar.gz is OpenStack Juno version for Centos7. - -trusty-juno-ppa.tar.gz is OpenStack Juno version for Ubuntu14.04. - -trusty-kilo-ppa.tar.gz is OpenStack Kilo version for Ubuntu14.04. - - -8. Edit compass4nfv/build/build.conf, find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items, -modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item). - -CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path for Ubuntu - -.. code-block:: bash - - CENTOS7_JUNO_PPA=/compass4nfv/work/repo/centos7-juno-ppa.tar.gz - - TRUSTY_JUNO_PPA=/compass4nfv/work/repo/trusty-juno-ppa.tar.gz - - -9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso -in the "compass4nfv/work/building" folder, that means building iso successfully. - - - - -* Approach 2 ---- source installation - - -This section indicates to install packages from source codes. If the targeted packages could not be -installed from apt-get and yum but from source codes, please refer this section. - - -1. Enter folder "compass4nfv/build/arch/Debian" or "compass4nfv/build/arch/RedHat" that depend on -operating system you want to install package, create a bash(.sh) file -which includes all the commands which install the packages from source codes. - - Example: - -.. code-block:: bash - - #!/bin/bash - apt-get update - apt-get install -y build-essential fakeroot debhelper \ - autoconf automake bzip2 libssl-dev \ - openssl graphviz python-all procps \ - python-qt4 python-zopeinterface \ - python-twisted-conch libtool wget - - pushd . - cd /tmp - wget http://openvswitch.org/releases/openvswitch-2.3.1.tar.gz - tar -zxvf openvswitch-2.3.1.tar.gz - cd openvswitch-2.3.1 - DEB_BUILD_OPTIONS='parallel=8 nocheck' fakeroot debian/rules binary - cd - - cp -f *.deb /var/cache/apt/archives/ - popd - -Please pay attention to the last second sentence, all the compiled packages need to be -copied to the "/var/cache/apt/archives/"(Ubuntu) folder, and for Centos, the folder is ... to be continued . - - -2. Add a new role so that Compass4nfv will install the packages during the deployment, -create a new role folder ({newrole}) in the "compass4nfv/deploy/adapters/ansible/roles/", -create a new folder named "vars" in the new role folder({newrole}), -and create a file named "main.yml" and add "---" at the head of this file. - - -3. If the packages' names are same in both Ubuntu and Centos, you just need edit main.yml. - -Add the packages' names as following: - -.. code-block:: bash - - packages_noarch: - - {targeted packages1} - - {targeted packages2} - - {targeted packages3} - ... - - -4. If the targeted packages' names are different in Ubuntu and Centos, -you need create "Debian.yml" and/or "RedHat.yml" in the same folder as "main.yml" -and add "---" at the head of the files. - -Add the packages' names as following in the "Debian.yml" and/or "RedHat.yml" : - -.. code-block:: bash - - packages: - - {targeted Ubuntu/RedHat packages1} - - {targeted Ubuntu/RedHat packages2} - - {targeted Ubuntu/RedHat packages3} - ... - - -Also you can refer "compass4nfv/deploy/adapters/ansible/roles/glance/vars" as example. - - -5.1 Enter "compass4nfv/deploy/adapters/ansible/openstack_juno/" and edit HA-ansible-multinodes.yml -and/or single-controller.yml, add {newrole} at an appropriate position, please be aware of that compass4nfv -deploys the roles in the order as list in HA-ansible-multinodes.yml/single-controller.yml, -you can add a new section as the following:: - - - hosts: all/controller/compute/ha - remote_user: root - sudo: True - roles: - - {newrole} - -The first line "hosts" of the section means compass4nfv will deploy {newrole} on which baremetals/VMs, -"all" means it deploys on all baremetals/VMs, "controller" means it deploys on all controller and so on. - -Also you can refer "glance" position in HA-ansible-multinodes.yml and single-controller.yml. - - -Attention - "HA-ansible-multinodes.yml" deploys controllers backup targeted environment and -3 controllers in backup mode + 2 compute by default. - "single-controller.yml" deploys 1 controller + 4 compute. - - -5.2 Or insert the new role into the existing section at an appropriate position -in HA-ansible-multinodes.yml and single-controller.yml. - - Example: - -.. code-block:: bash - - - hosts: controller - remote_user: root - sudo: True - roles: - - database - - mq - - keystone - - nova-controller - - neutron-controller - - {newrole} - -Please pay attention to the first line "hosts" by which Compass4nfv deploys {newrole} on which baremetals/VMs. - -Also please pay attention to the position inserted as Compass4nfv deploys the packages in the order as list. - -Also you can refer "glance" position as example in HA-ansible-multinodes.yml and single-controller.yml. - - - -6. Run compass4nfv/build/make_repo.sh . - - - -7. After 6 finishs, please check "compass4nfv/work/repo/" folder, -if files as following exist in the folder, that means building packages successfully. - -centos7-juno-ppa.tar.gz is OpenStack Juno version for Centos7. - -trusty-juno-ppa.tar.gz is OpenStack Juno version for Ubuntu14.04. - -trusty-kilo-ppa.tar.gz is OpenStack Kilo version for Ubuntu14.04. - - - -8. Edit compass4nfv/build/build.conf, find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items, -modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item). - -CENTOS7_JUNO_PPA is packages path for Centos, TRUSTY_JUNO_PPA is packages path for Ubuntu - -.. code-block:: bash - - CENTOS7_JUNO_PPA=/compass4nfv/work/repo/centos7-juno-ppa.tar.gz - - TRUSTY_JUNO_PPA=/compass4nfv/work/repo/trusty-juno-ppa.tar.gz - - - -9. Run compass4nfv/build.sh to build a new ISO, after finished, if there is a new ISO file compass.iso -in the "compass4nfv/work/building" folder, that means building ISO successfully. - - - -* Approach 3 ---- autonomous packages installation - -package installed, to be continued... - - - -How to deploy baremetal and VMs -=============================== - -Before deployment, there are some network configuration to be checked based on your reality network topology. -Compass4nfv network configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". - -Based on current default network configuration, the hosts(controller,compute) network is as following picture. - -.. image:: compass4nfv_host_network.png - :height: 500 - :width: 700 - :alt: OPNFV - :align: left - -network_cfg.yaml - -.. code-block:: bash - - provider_net_mappings: - - name: br-prv - network: physnet - interface: eth1 - type: ovs - role: - - controller - - compute - sys_intf_mappings: - - name: mgmt - interface: eth1 - vlan_tag: 2 - role: - - controller - - compute - - name: storage - interface: eth1 - vlan_tag: 3 - role: - - controller - - compute - - name: external - interface: br-prv - vlan_tag: 4 - role: - - controller - - compute - ip_settings: - - name: mgmt - ip_ranges: - - - "172.16.1.1" - - "172.16.1.254" - cidr: "172.16.1.0/24" - role: - - controller - - compute - - name: storage - ip_ranges: - - - "172.16.2.1" - - "172.16.2.254" - cidr: "172.16.2.0/24" - role: - - controller - - compute - - name: external - ip_ranges: - - - "172.16.3.2" - - "172.16.3.100" - cidr: "172.16.3.0/24" - gw: "172.16.3.1" - role: - - controller - - compute - - - -"br-prv" is a bridge created by OpenvSwitch, "mgmt" "storage" and "external" are VLAN. - -"mgmt" "stoarge" and "br-prv" can locate on any ethernet port("interface") -as long as the host can communicate with other hosts via this ethernet. - -"external" must locate on "br-prv". - -"mgmt" "storage" and "external" could be set subnet as you like, -but must be in different subnets and "vlan_tag" also must be different. - - -Also check the following items in file "compass4nfv/deploy/conf/base.conf" - -.. code-block:: bash - - export INSTALL_IP=${INSTALL_IP:-10.1.0.12} - export INSTALL_MASK=${INSTALL_MASK:-255.255.255.0} - export INSTALL_GW=${INSTALL_GW:-10.1.0.1} - - -Item "INSTALL_IP" is used to install baremetal/VM during deployment. -Compass4nfv on jumpserver creates a bridge with IP address "INSTALL_GW" and -all baremetal/VM deployments are via this subnet. Please don't set this item -as the same subnet as any other ip configuration in the jumpserver. - - - - - -* Deploy baremetal in HA mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, -modify the item "ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. Edit compass4nfv/deploy/conf/baremetal_cluster_general.yml, to be continued... - - -3. Edit compass4nfv/deploy/conf/base.conf, modify the item "export OM_NIC=${OM_NIC:-eth3}" -as the install network ethernet port based your jumpserver. - - -4. Run compass4nfv/deploy.sh baremetal_cluster_general - - - - -* Deploy baremetal in Single mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, modify the item "ISO_URL" -as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. Edit compass4nfv/deploy/conf/baremetal_five.yml , change items -[name, mac, ipmiUser, ipmiPass, ipmiIp, roles] based on the baremetal to be deployed. - - -3. Edit compass4nfv/deploy/conf/base.conf, modify the item -"export OM_NIC=${OM_NIC:-eth3}" as the install network ethernet port based your jumpserver. - - -4. Run compass4nfv/deploy.sh baremetal_five - - - - -* Deploy VMs in HA mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, modify the item -"ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. (Optional) Edit compass4nfv/deploy/conf/virtual_cluster.yml, change items [name, roles] as you want, -also you could reduce or add hosts sections as you want. -And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. - - -3. Run compass4nfv/deploy.sh virtual_cluster or Run compass4nfv/deploy.sh . - - - - -* Deploy baremetal in Single mode: - - -1. (optional) If you have built a new ISO before and want to use the new ISO, -please edit compass4nfv/deploy/conf/base.conf file, -modify the item "ISO_URL" as export ISO_URL=file:///compass4nfv/work/building/compass.iso - - -2. (Optional) Edit compass4nfv/deploy/conf/virtual_five.yml, change items [name, roles] as you want, -also you could reduce or add hosts sections as you want. -And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. - - -3. Run compass4nfv/deploy.sh virtual_five . - - -Attention: -Roles here includes controller compute network storage ha odl and onos. - - - - - -How to deploy without internet access -===================================== - - -If you have created your own ISO file(compass.iso), you realy could deploy without internet access, -edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path -(export ISO_URL=file:///compass4nfv/work/building/compass.iso). -Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. - - -Also you can download compass.iso first from OPNFV artifacts repository -(http://artifacts.opnfv.org/, search compass4nfv and select an appropriate ISO file) via wget or curl. -After this, edit "compass4nfv/deploy/conf/base.conf" file and assign item ISO_URL as your local ISO file path. -Then execute "compass4nfv/deploy.sh" and Compass4nfv could deploy with local compass.iso without internet access. - - - - - -How to integration plugins -========================== - - - diff --git a/docs/how-to-use-compass4nfv/index.rst b/docs/how-to-use-compass4nfv/index.rst deleted file mode 100644 index f4a5bdeb..00000000 --- a/docs/how-to-use-compass4nfv/index.rst +++ /dev/null @@ -1,13 +0,0 @@ -********************* -Compass4nfv Project -********************* - -Contents: - -.. toctree:: - :numbered: - :maxdepth: 4 - - how-to-use-compass4nfv/documentation-compass4nfv.rst - how-to-use-compass4nfv/compass4nfv_host_network.png - how-to-use-compass4nfv/compass4nfv_network_topology.png |
