diff options
Diffstat (limited to 'docs/configguide')
| -rw-r--r-- | docs/configguide/index.rst | 16 | ||||
| -rw-r--r-- | docs/configguide/installerconfig.rst | 354 | ||||
| -rw-r--r-- | docs/configguide/introduction.rst | 29 | ||||
| -rw-r--r-- | docs/configguide/postinstall.rst | 50 | ||||
| -rw-r--r-- | docs/configguide/references.rst | 40 | ||||
| -rw-r--r-- | docs/configguide/vmdeploy.rst | 46 |
6 files changed, 498 insertions, 37 deletions
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst new file mode 100644 index 00000000..71ea3127 --- /dev/null +++ b/docs/configguide/index.rst @@ -0,0 +1,16 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 + +******************************************************** +OPNFV(Brahmaputra) Compass4nfv installation instructions +******************************************************** + +.. toctree:: + :numbered: + :maxdepth: 4 + + introduction.rst + installerconfig.rst + vmdeploy.rst + references.rst + diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst index dd4a4333..3d9269a4 100644 --- a/docs/configguide/installerconfig.rst +++ b/docs/configguide/installerconfig.rst @@ -1,23 +1,347 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) -<Project> configuration -======================= -Add a brief introduction to configure OPNFV with this specific installer +Compass4nfv configuration +========================= -Pre-configuration activities ------------------------------ -Describe specific pre-configuration activities. Refer to Installations guide and release notes +This document describes providing guidelines on how to install and +configure the Brahmaputra release of OPNFV when using Compass as a +deployment tool including required software and hardware +configurations. -Hardware configuration ------------------------ -Describe the hardware configuration needed for this specific installer +Installation and configuration of host OS, OpenStack, OpenDaylight, +ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal +nodes. -Jumphost configuration ------------------------ -Describe intial Jumphost configuration (network and software)needed in order to deploy the installer +The audience of this document is assumed to have good knowledge in +networking and Unix/Linux administration. -Platform components configuration ---------------------------------- -Describe the configuration of each component in the installer +Preconditions +============= + +Before starting the installation of the Brahmaputra release of OPNFV, +some planning must be done. + + +Retrieving the installation ISO image +------------------------------------- + +First of all, The installation ISO is needed for deploying your OPNFV +environment, it included packages of Compass,OpenStack,OpenDaylight,ONOS +and so on. the iso can be retrieved via OPNFV artifacts repository: + +http://artifacts.opnfv.org/ + +NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image. + +E.g. +compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso +compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties + +The name of iso image includes the time of iso building, you can get the daily +ISO according the building time. +The git url and sha1 of Compass4nfv are recorded in properties files, +According these, the corresponding deployment scripts can be retrieved. + + +Getting the deployment scripts +------------------------------ + +To retrieve the repository of Compass4nfv on Jumphost use the following command: + +- git clone https://gerrit.opnfv.org/gerrit/compass4nfv + +NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY. + +If you don't have a Linux foundation user id, get your own by the url: + +https://wiki.opnfv.org/developer/getting_started + +Set the branch to the corresponding deployment scripts: + +E.g. +Git sha1 in file "opnfv-2016-01-16_15-03-18.properties" is +d5a13ce7cc2ce89946d34b0402ecf33c1d291851 + +- git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851 + + +Preparing the installation environment +-------------------------------------- + +If you have only 1 Bare Metal server, Virtual deployment is recommended. if more +than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of +servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller, +1 for compute. + + +Setup Requirements +================== + +Jumphost Requirements +--------------------- + +The Jumphost requirements are outlined below: + +1. Ubuntu 14.04 (Pre-installed). + +2. Root access. + +3. libvirt virtualization support. + +4. Minimum 2 NICs. + + - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) + + - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) + + - External Network (Optional: Internet access) + +5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment. + +6. Minimum 100G storage. + +Bare Metal Node Requirements +---------------------------- + +Bare Metal nodes require: + +1. IPMI enabled on OOB interface for power control. + +2. BIOS boot priority should be PXE first then local hard disk. + +3. Minimum 3 NICs. + + - PXE installation Network (Broadcasting PXE request) + + - IPMI Network (Receiving IPMI command from Jumphost) + + - External Network (OpenStack mgmt/external/storage/tenant network) + +Network Requirements +-------------------- + +Network requirements include: + +1. No DHCP or TFTP server running on networks used by OPNFV. + +2. 2-6 separate networks with connectivity between Jumphost and nodes. + + - PXE installation Network + + - IPMI Network + + - Openstack mgmt Network* + + - Openstack external Network* + + - Openstack tenant Network* + + - Openstack storage Network* + +3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). + +4. External network has Internet access, meaning a gateway and DNS availability. + +**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** +**NIC(Reconfigurated in network.yml).** + +Execution Requirements (Bare Metal Only) +---------------------------------------- + +In order to execute a deployment, one must gather the following information: + +1. IPMI IP addresses for the nodes. + +2. IPMI login information for the nodes (user/pass). + +3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. + +Installation Guide (BM Deployment) +================================== + +Nodes Configuration (BM Deployment) +----------------------------------- + +The bellow file is the inventory template of deployment nodes: + +"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml" + +You can write your own IPMI IP/User/Password/Mac address/roles reference to it. + + - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 + or IPMI 2.0 is available. + + - ipmiIP -- IPMI IP address for deployment node. Make sure it can access + from Jumphost. + + - ipmiUser -- IPMI Username for deployment node. + + - ipmiPass -- IPMI Password for deployment node. + + - mac -- MAC Address of deployment node PXE NIC . + + - name -- Host name for deployment node after installation. + + - roles -- Components deployed. + + +**Assignment of different roles to servers** + +E.g. Openstack only deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + + - name: host2 + roles: + - compute + +NOTE: +IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. + +E.g. Openstack and ceph deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - ceph-admin + - ceph-mon + + - name: host2 + roles: + - compute + - ceph-osd + +E.g. Openstack and ODL deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - odl + + - name: host2 + roles: + - compute + +E.g. Openstack and ONOS deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + roles: + - controller + - ha + - onos + + - name: host2 + roles: + - compute + + +Network Configuration (BM Deployment) +------------------------------------- + +Before deployment, there are some network configuration to be checked based on your network topology. +Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml". +You can write your own reference to it. + +**The following figure shows the default network configuration.** + +.. code-block:: console + + + +--+ +--+ +--+ + | | | | | | + | | +------------+ | | | | + | +------+ Jumphost +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host1 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host2 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host3 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | | | | | + +-++ ++-+ +-++ + ^ ^ ^ + | | | + | | | + +-+-------------------------+ | | + | External Network | | | + +---------------------------+ | | + +-----------------------+---+ | + | IPMI Network | | + +---------------------------+ | + +-------------------------+-+ + | PXE(Installation) Network | + +---------------------------+ + + +Start Deployment (BM Deployment) +-------------------------------- + +1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.) + +.. code-block:: bash + + export INSTALL_NIC=eth1 + +2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) + +.. code-block:: bash + + export OS_VERSION=trusty + +3. Set OpenStack version for deployment nodes. (set liberty E.g.) + +.. code-block:: bash + + export OPENSTACK_VERSION=liberty + +4. Set ISO image that you want to deploy + +.. code-block:: bash + + export ISO_URL=file:///${YOUR_OWN}/compass.iso + or + export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso + +5. Run ``deploy.sh`` with inventory and network configuration + +.. code-block:: bash + + ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml diff --git a/docs/configguide/introduction.rst b/docs/configguide/introduction.rst new file mode 100644 index 00000000..820cb29a --- /dev/null +++ b/docs/configguide/introduction.rst @@ -0,0 +1,29 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Abstract +======== + +This document describes how to install the Brahmaputra release of OPNFV when +using Compass4nfv as a deployment tool covering it's limitations, dependencies +and required system resources. + +Version history +=============== + ++--------------------+--------------------+--------------------+---------------------------+ +| **Date** | **Ver.** | **Author** | **Comment** | +| | | | | ++--------------------+--------------------+--------------------+---------------------------+ +| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for | +| | | (HUAWEI) | Compass4nfv B release | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & | +| | | (HUAWEI) | formatting | ++--------------------+--------------------+--------------------+---------------------------+ +| 2015-09-12 | 0.0.1 | Chen Shuai | First draft | +| | | (HUAWEI) | | ++--------------------+--------------------+--------------------+---------------------------+ + + diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst index 1702cea5..050f77c3 100644 --- a/docs/configguide/postinstall.rst +++ b/docs/configguide/postinstall.rst @@ -1,26 +1,32 @@ -<Project> post installation procedures -====================================== -Add a brief introduction to the methods of validating the installation -according to this specific installer or feature. +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 -Automated post installation activities --------------------------------------- -Describe specific post installation activities performed by the OPNFV -deployment pipeline including testing activities and reports. Refer to -the relevant testing guides, results, and release notes. +.. commented as there is no content for this file at this time. -note: this section should be singular and derived from the test projects -once we have one test suite to run for all deploy tools. This is not the -case yet so each deploy tool will need to provide (hopefully very simillar) -documentation of this. +.. <Project> post installation procedures +.. ====================================== +.. Add a brief introduction to the methods of validating the installation +.. according to this specific installer or feature. -<Project> post configuration procedures --------------------------------------- -Describe any deploy tool or feature specific scripts, tests or procedures -that should be carried out on the deployment post install and configuration -in this section. +.. Automated post installation activities +.. -------------------------------------- +.. Describe specific post installation activities performed by the OPNFV +.. deployment pipeline including testing activities and reports. Refer to +.. the relevant testing guides, results, and release notes. + +.. note: this section should be singular and derived from the test projects +.. once we have one test suite to run for all deploy tools. This is not the +.. case yet so each deploy tool will need to provide (hopefully very simillar) +.. documentation of this. + +.. <Project> post configuration procedures +.. -------------------------------------- +.. Describe any deploy tool or feature specific scripts, tests or procedures +.. that should be carried out on the deployment post install and configuration +.. in this section. + +.. Platform components validation +.. --------------------------------- +.. Describe any component specific validation procedures necessary for your +.. deployment tool in this section. -Platform components validation ---------------------------------- -Describe any component specific validation procedures necessary for your -deployment tool in this section. diff --git a/docs/configguide/references.rst b/docs/configguide/references.rst new file mode 100644 index 00000000..0f317dd5 --- /dev/null +++ b/docs/configguide/references.rst @@ -0,0 +1,40 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +References +========== + +OPNFV +----- + +`OPNFV Home Page <www.opnfv.org>`_ + +`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_ + +`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_ + +OpenStack +--------- + +`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_ + +`OpenStack documentation <http://docs.openstack.org>`_ + +OpenDaylight +------------ + +`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_ + +ONOS +---- + +`ONOS artifacts <http://onosproject.org/software/>`_ + +Compass +------- + +`Compass Home Page <http://www.syscompass.org/>`_ + +:Authors: Justin Chi (HUAWEI) + diff --git a/docs/configguide/vmdeploy.rst b/docs/configguide/vmdeploy.rst new file mode 100644 index 00000000..a7588845 --- /dev/null +++ b/docs/configguide/vmdeploy.rst @@ -0,0 +1,46 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International Licence. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Installation Guide (VM Deployment) +================================== + +Nodes Configuration (VM Deployment) +----------------------------------- + +Please follow the instructions in section `Installation Guide (BM Deployment)`, +and no need to set IPMI/PXE/MAC parameters. + +Network Configuration (VM Deployment) +------------------------------------- + +Please follow the instructions in section `Installation Guide (BM Deployment)`. + +Start Deployment (VM Deployment) +-------------------------------- + +1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.) + +.. code-block:: bash + + export OS_VERSION=trusty + +3. Set OpenStack version for deployment nodes. (set liberty E.g.) + +.. code-block:: bash + + export OPENSTACK_VERSION=liberty + +4. Set ISO image that you want to deploy + +.. code-block:: bash + + export ISO_URL=file:///${YOUR_OWN}/compass.iso + or + export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso + +5. Run ``deploy.sh`` with inventory and network configuration + +.. code-block:: bash + + ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml |