summaryrefslogtreecommitdiffstats
path: root/docs/configguide
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configguide')
-rw-r--r--docs/configguide/index.rst16
-rw-r--r--docs/configguide/installerconfig.rst354
-rw-r--r--docs/configguide/introduction.rst29
-rw-r--r--docs/configguide/postinstall.rst50
-rw-r--r--docs/configguide/references.rst40
-rw-r--r--docs/configguide/vmdeploy.rst46
6 files changed, 498 insertions, 37 deletions
diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
new file mode 100644
index 00000000..71ea3127
--- /dev/null
+++ b/docs/configguide/index.rst
@@ -0,0 +1,16 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+
+********************************************************
+OPNFV(Brahmaputra) Compass4nfv installation instructions
+********************************************************
+
+.. toctree::
+ :numbered:
+ :maxdepth: 4
+
+ introduction.rst
+ installerconfig.rst
+ vmdeploy.rst
+ references.rst
+
diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst
index dd4a4333..3d9269a4 100644
--- a/docs/configguide/installerconfig.rst
+++ b/docs/configguide/installerconfig.rst
@@ -1,23 +1,347 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
-<Project> configuration
-=======================
-Add a brief introduction to configure OPNFV with this specific installer
+Compass4nfv configuration
+=========================
-Pre-configuration activities
------------------------------
-Describe specific pre-configuration activities. Refer to Installations guide and release notes
+This document describes providing guidelines on how to install and
+configure the Brahmaputra release of OPNFV when using Compass as a
+deployment tool including required software and hardware
+configurations.
-Hardware configuration
------------------------
-Describe the hardware configuration needed for this specific installer
+Installation and configuration of host OS, OpenStack, OpenDaylight,
+ONOS, Ceph etc. can be supported by Compass on VMs or Bare Metal
+nodes.
-Jumphost configuration
------------------------
-Describe intial Jumphost configuration (network and software)needed in order to deploy the installer
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
-Platform components configuration
----------------------------------
-Describe the configuration of each component in the installer
+Preconditions
+=============
+
+Before starting the installation of the Brahmaputra release of OPNFV,
+some planning must be done.
+
+
+Retrieving the installation ISO image
+-------------------------------------
+
+First of all, The installation ISO is needed for deploying your OPNFV
+environment, it included packages of Compass,OpenStack,OpenDaylight,ONOS
+and so on. the iso can be retrieved via OPNFV artifacts repository:
+
+http://artifacts.opnfv.org/
+
+NOTE: Search the keyword "Compass4nfv/Brahmaputra" to locate the ISO image.
+
+E.g.
+compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.iso
+compass4nfv/brahmaputra/opnfv-2016-01-16_15-03-18.properties
+
+The name of iso image includes the time of iso building, you can get the daily
+ISO according the building time.
+The git url and sha1 of Compass4nfv are recorded in properties files,
+According these, the corresponding deployment scripts can be retrieved.
+
+
+Getting the deployment scripts
+------------------------------
+
+To retrieve the repository of Compass4nfv on Jumphost use the following command:
+
+- git clone https://gerrit.opnfv.org/gerrit/compass4nfv
+
+NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY.
+
+If you don't have a Linux foundation user id, get your own by the url:
+
+https://wiki.opnfv.org/developer/getting_started
+
+Set the branch to the corresponding deployment scripts:
+
+E.g.
+Git sha1 in file "opnfv-2016-01-16_15-03-18.properties" is
+d5a13ce7cc2ce89946d34b0402ecf33c1d291851
+
+- git checkout d5a13ce7cc2ce89946d34b0402ecf33c1d291851
+
+
+Preparing the installation environment
+--------------------------------------
+
+If you have only 1 Bare Metal server, Virtual deployment is recommended. if more
+than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of
+servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller,
+1 for compute.
+
+
+Setup Requirements
+==================
+
+Jumphost Requirements
+---------------------
+
+The Jumphost requirements are outlined below:
+
+1. Ubuntu 14.04 (Pre-installed).
+
+2. Root access.
+
+3. libvirt virtualization support.
+
+4. Minimum 2 NICs.
+
+ - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning)
+
+ - IPMI Network (Nodes power control and set boot PXE first via IPMI interface)
+
+ - External Network (Optional: Internet access)
+
+5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a VM deployment.
+
+6. Minimum 100G storage.
+
+Bare Metal Node Requirements
+----------------------------
+
+Bare Metal nodes require:
+
+1. IPMI enabled on OOB interface for power control.
+
+2. BIOS boot priority should be PXE first then local hard disk.
+
+3. Minimum 3 NICs.
+
+ - PXE installation Network (Broadcasting PXE request)
+
+ - IPMI Network (Receiving IPMI command from Jumphost)
+
+ - External Network (OpenStack mgmt/external/storage/tenant network)
+
+Network Requirements
+--------------------
+
+Network requirements include:
+
+1. No DHCP or TFTP server running on networks used by OPNFV.
+
+2. 2-6 separate networks with connectivity between Jumphost and nodes.
+
+ - PXE installation Network
+
+ - IPMI Network
+
+ - Openstack mgmt Network*
+
+ - Openstack external Network*
+
+ - Openstack tenant Network*
+
+ - Openstack storage Network*
+
+3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only).
+
+4. External network has Internet access, meaning a gateway and DNS availability.
+
+**The networks with(*) can be share one NIC(Default configuration) or use an exclusive**
+**NIC(Reconfigurated in network.yml).**
+
+Execution Requirements (Bare Metal Only)
+----------------------------------------
+
+In order to execute a deployment, one must gather the following information:
+
+1. IPMI IP addresses for the nodes.
+
+2. IPMI login information for the nodes (user/pass).
+
+3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes.
+
+Installation Guide (BM Deployment)
+==================================
+
+Nodes Configuration (BM Deployment)
+-----------------------------------
+
+The bellow file is the inventory template of deployment nodes:
+
+"compass4nfv/deploy/conf/hardware_environment/huawei_us_lab/pod1/dha.yml"
+
+You can write your own IPMI IP/User/Password/Mac address/roles reference to it.
+
+ - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0
+ or IPMI 2.0 is available.
+
+ - ipmiIP -- IPMI IP address for deployment node. Make sure it can access
+ from Jumphost.
+
+ - ipmiUser -- IPMI Username for deployment node.
+
+ - ipmiPass -- IPMI Password for deployment node.
+
+ - mac -- MAC Address of deployment node PXE NIC .
+
+ - name -- Host name for deployment node after installation.
+
+ - roles -- Components deployed.
+
+
+**Assignment of different roles to servers**
+
+E.g. Openstack only deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+
+ - name: host2
+ roles:
+ - compute
+
+NOTE:
+IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO.
+
+E.g. Openstack and ceph deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - ceph-admin
+ - ceph-mon
+
+ - name: host2
+ roles:
+ - compute
+ - ceph-osd
+
+E.g. Openstack and ODL deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - odl
+
+ - name: host2
+ roles:
+ - compute
+
+E.g. Openstack and ONOS deployment roles setting
+
+.. code-block:: yaml
+
+ hosts:
+ - name: host1
+ roles:
+ - controller
+ - ha
+ - onos
+
+ - name: host2
+ roles:
+ - compute
+
+
+Network Configuration (BM Deployment)
+-------------------------------------
+
+Before deployment, there are some network configuration to be checked based on your network topology.
+Compass4nfv network default configuration file is "compass4nfv/deploy/conf/network_cfg.yaml".
+You can write your own reference to it.
+
+**The following figure shows the default network configuration.**
+
+.. code-block:: console
+
+
+ +--+ +--+ +--+
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ Jumphost +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host1 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host2 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | +------------+ | | | |
+ | +------+ host3 +------+ | | |
+ | | +------+-----+ | | | |
+ | | | | | | |
+ | | +------------+ +-----+ |
+ | | | | | |
+ | | | | | |
+ +-++ ++-+ +-++
+ ^ ^ ^
+ | | |
+ | | |
+ +-+-------------------------+ | |
+ | External Network | | |
+ +---------------------------+ | |
+ +-----------------------+---+ |
+ | IPMI Network | |
+ +---------------------------+ |
+ +-------------------------+-+
+ | PXE(Installation) Network |
+ +---------------------------+
+
+
+Start Deployment (BM Deployment)
+--------------------------------
+
+1. Set PXE/Installation NIC for Jumphost. (set eth1 E.g.)
+
+.. code-block:: bash
+
+ export INSTALL_NIC=eth1
+
+2. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.)
+
+.. code-block:: bash
+
+ export OS_VERSION=trusty
+
+3. Set OpenStack version for deployment nodes. (set liberty E.g.)
+
+.. code-block:: bash
+
+ export OPENSTACK_VERSION=liberty
+
+4. Set ISO image that you want to deploy
+
+.. code-block:: bash
+
+ export ISO_URL=file:///${YOUR_OWN}/compass.iso
+ or
+ export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso
+
+5. Run ``deploy.sh`` with inventory and network configuration
+
+.. code-block:: bash
+
+ ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml
diff --git a/docs/configguide/introduction.rst b/docs/configguide/introduction.rst
new file mode 100644
index 00000000..820cb29a
--- /dev/null
+++ b/docs/configguide/introduction.rst
@@ -0,0 +1,29 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Abstract
+========
+
+This document describes how to install the Brahmaputra release of OPNFV when
+using Compass4nfv as a deployment tool covering it's limitations, dependencies
+and required system resources.
+
+Version history
+===============
+
++--------------------+--------------------+--------------------+---------------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+---------------------------+
+| 2016-01-17 | 1.0.0 | Justin chi | Rewritten for |
+| | | (HUAWEI) | Compass4nfv B release |
++--------------------+--------------------+--------------------+---------------------------+
+| 2015-12-16 | 0.0.2 | Matthew Li | Minor changes & |
+| | | (HUAWEI) | formatting |
++--------------------+--------------------+--------------------+---------------------------+
+| 2015-09-12 | 0.0.1 | Chen Shuai | First draft |
+| | | (HUAWEI) | |
++--------------------+--------------------+--------------------+---------------------------+
+
+
diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst
index 1702cea5..050f77c3 100644
--- a/docs/configguide/postinstall.rst
+++ b/docs/configguide/postinstall.rst
@@ -1,26 +1,32 @@
-<Project> post installation procedures
-======================================
-Add a brief introduction to the methods of validating the installation
-according to this specific installer or feature.
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
-Automated post installation activities
---------------------------------------
-Describe specific post installation activities performed by the OPNFV
-deployment pipeline including testing activities and reports. Refer to
-the relevant testing guides, results, and release notes.
+.. commented as there is no content for this file at this time.
-note: this section should be singular and derived from the test projects
-once we have one test suite to run for all deploy tools. This is not the
-case yet so each deploy tool will need to provide (hopefully very simillar)
-documentation of this.
+.. <Project> post installation procedures
+.. ======================================
+.. Add a brief introduction to the methods of validating the installation
+.. according to this specific installer or feature.
-<Project> post configuration procedures
---------------------------------------
-Describe any deploy tool or feature specific scripts, tests or procedures
-that should be carried out on the deployment post install and configuration
-in this section.
+.. Automated post installation activities
+.. --------------------------------------
+.. Describe specific post installation activities performed by the OPNFV
+.. deployment pipeline including testing activities and reports. Refer to
+.. the relevant testing guides, results, and release notes.
+
+.. note: this section should be singular and derived from the test projects
+.. once we have one test suite to run for all deploy tools. This is not the
+.. case yet so each deploy tool will need to provide (hopefully very simillar)
+.. documentation of this.
+
+.. <Project> post configuration procedures
+.. --------------------------------------
+.. Describe any deploy tool or feature specific scripts, tests or procedures
+.. that should be carried out on the deployment post install and configuration
+.. in this section.
+
+.. Platform components validation
+.. ---------------------------------
+.. Describe any component specific validation procedures necessary for your
+.. deployment tool in this section.
-Platform components validation
----------------------------------
-Describe any component specific validation procedures necessary for your
-deployment tool in this section.
diff --git a/docs/configguide/references.rst b/docs/configguide/references.rst
new file mode 100644
index 00000000..0f317dd5
--- /dev/null
+++ b/docs/configguide/references.rst
@@ -0,0 +1,40 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+References
+==========
+
+OPNFV
+-----
+
+`OPNFV Home Page <www.opnfv.org>`_
+
+`OPNFV Genesis project page <https://wiki.opnfv.org/get_started>`_
+
+`OPNFV Compass4nfv project page <https://wiki.opnfv.org/compass4nfv>`_
+
+OpenStack
+---------
+
+`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+
+`OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+ONOS
+----
+
+`ONOS artifacts <http://onosproject.org/software/>`_
+
+Compass
+-------
+
+`Compass Home Page <http://www.syscompass.org/>`_
+
+:Authors: Justin Chi (HUAWEI)
+
diff --git a/docs/configguide/vmdeploy.rst b/docs/configguide/vmdeploy.rst
new file mode 100644
index 00000000..a7588845
--- /dev/null
+++ b/docs/configguide/vmdeploy.rst
@@ -0,0 +1,46 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International Licence.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI)
+
+Installation Guide (VM Deployment)
+==================================
+
+Nodes Configuration (VM Deployment)
+-----------------------------------
+
+Please follow the instructions in section `Installation Guide (BM Deployment)`,
+and no need to set IPMI/PXE/MAC parameters.
+
+Network Configuration (VM Deployment)
+-------------------------------------
+
+Please follow the instructions in section `Installation Guide (BM Deployment)`.
+
+Start Deployment (VM Deployment)
+--------------------------------
+
+1. Set OS version for nodes provisioning. (set Ubuntu14.04 E.g.)
+
+.. code-block:: bash
+
+ export OS_VERSION=trusty
+
+3. Set OpenStack version for deployment nodes. (set liberty E.g.)
+
+.. code-block:: bash
+
+ export OPENSTACK_VERSION=liberty
+
+4. Set ISO image that you want to deploy
+
+.. code-block:: bash
+
+ export ISO_URL=file:///${YOUR_OWN}/compass.iso
+ or
+ export ISO_URL=http://artifacts.opnfv.org/compass4nfv/brahmaputra/opnfv-release.iso
+
+5. Run ``deploy.sh`` with inventory and network configuration
+
+.. code-block:: bash
+
+ ./deploy.sh --dha ${YOUR_OWN}/dha.yml --network ${YOUR_OWN}/network.yml