diff options
Diffstat (limited to 'docs/configguide/installerconfig.rst')
| -rw-r--r-- | docs/configguide/installerconfig.rst | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst deleted file mode 100644 index 9e552494..00000000 --- a/docs/configguide/installerconfig.rst +++ /dev/null @@ -1,155 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) - -Compass4nfv configuration -========================= - -This document describes providing guidelines on how to install and -configure the Colorado release of OPNFV when using Compass as a -deployment tool including required software and hardware -configurations. - -Installation and configuration of host OS, OpenStack, OpenDaylight, -ONOS, Ceph etc. can be supported by Compass on Virtual nodes or Bare Metal -nodes. - -The audience of this document is assumed to have good knowledge in -networking and Unix/Linux administration. - - -Preconditions -------------- - -Before starting the installation of the Colorado release of OPNFV, -some planning must be done. - - -Retrieving the installation ISO image -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -First of all, The installation ISO is needed for deploying your OPNFV -environment, it included packages of Compass, OpenStack, OpenDaylight, ONOS -and so on. - -The stable release ISO can be retrieved via `OPNFV software download page <https://www.opnfv.org/software>`_ - -The daily build ISO can be retrieved via OPNFV artifacts repository: - -http://artifacts.opnfv.org/ - -NOTE: Search the keyword "compass4nfv/Colorado" to locate the ISO image. - -E.g. -compass4nfv/colorado/opnfv-2016-01-16_15-03-18.iso -compass4nfv/colorado/opnfv-2016-01-16_15-03-18.properties - -The name of iso image includes the time of iso building, you can get the daily -ISO according the building time. -The git url and sha1 of Compass4nfv are recorded in properties files, -According these, the corresponding deployment scripts can be retrieved. - - -Getting the deployment scripts -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -To retrieve the repository of Compass4nfv on Jumphost use the following command: - -- git clone https://gerrit.opnfv.org/gerrit/compass4nfv - -NOTE: PLEASE DO NOT GIT CLONE COMPASS4NFV IN root DIRECTORY(Include subfolders). - -To get stable /colorado release, you can use the following command: - -- git checkout colorado.1.0 - -Setup Requirements ------------------- - -If you have only 1 Bare Metal server, Virtual deployment is recommended. if more -than or equal 3 servers, the Bare Metal deployment is recommended. The minimum number of -servers for Bare metal deployment is 3, 1 for JumpServer(Jumphost), 1 for controller, -1 for compute. - - -Jumphost Requirements -~~~~~~~~~~~~~~~~~~~~~ - -The Jumphost requirements are outlined below: - -1. Ubuntu 14.04 (Pre-installed). - -2. Root access. - -3. libvirt virtualization support. - -4. Minimum 2 NICs. - - - PXE installation Network (Receiving PXE request from nodes and providing OS provisioning) - - - IPMI Network (Nodes power control and set boot PXE first via IPMI interface) - - - External Network (Optional: Internet access) - -5. 16 GB of RAM for a Bare Metal deployment, 64 GB of RAM for a Virtual deployment. - -6. CPU cores: 32, Memory: 64 GB, Hard Disk: 500 GB, (Virtual Deloment needs 1 TB Hard Disk) - - -Bare Metal Node Requirements ----------------------------- - -Bare Metal nodes require: - -1. IPMI enabled on OOB interface for power control. - -2. BIOS boot priority should be PXE first then local hard disk. - -3. Minimum 3 NICs. - - - PXE installation Network (Broadcasting PXE request) - - - IPMI Network (Receiving IPMI command from Jumphost) - - - External Network (OpenStack mgmt/external/storage/tenant network) - - -Network Requirements --------------------- - -Network requirements include: - -1. No DHCP or TFTP server running on networks used by OPNFV. - -2. 2-6 separate networks with connectivity between Jumphost and nodes. - - - PXE installation Network - - - IPMI Network - - - Openstack mgmt Network* - - - Openstack external Network* - - - Openstack tenant Network* - - - Openstack storage Network* - -3. Lights out OOB network access from Jumphost with IPMI node enabled (Bare Metal deployment only). - -4. External network has Internet access, meaning a gateway and DNS availability. - -**The networks with(*) can be share one NIC(Default configuration) or use an exclusive** -**NIC(Reconfigurated in network.yml).** - - -Execution Requirements (Bare Metal Only) ----------------------------------------- - -In order to execute a deployment, one must gather the following information: - -1. IPMI IP addresses of the nodes. - -2. IPMI login information for the nodes (user/pass). - -3. MAC address of Control Plane / Provisioning interfaces of the Bare Metal nodes. |