diff options
Diffstat (limited to 'deploy')
3 files changed, 89 insertions, 815 deletions
diff --git a/deploy/adapters/ansible/roles/glance/templates/glance-api.conf b/deploy/adapters/ansible/roles/glance/templates/glance-api.conf index ab63e054..9be29f4f 100644 --- a/deploy/adapters/ansible/roles/glance/templates/glance-api.conf +++ b/deploy/adapters/ansible/roles/glance/templates/glance-api.conf @@ -1,656 +1,56 @@ +{% set workers = ansible_processor_vcpus // 2 %} +{% set workers = workers if workers else 1 %} +{% set memcached_servers = [] %} +{% set rabbitmq_servers = [] %} +{% for host in haproxy_hosts.values() %} +{% set _ = memcached_servers.append('%s:11211'% host) %} +{% set _ = rabbitmq_servers.append('%s:5672'% host) %} +{% endfor %} +{% set memcached_servers = memcached_servers|join(',') %} +{% set rabbitmq_servers = rabbitmq_servers|join(',') %} + [DEFAULT] -# Show more verbose log output (sets INFO log level output) verbose = {{ VERBOSE }} - -# Show debugging output in logs (sets DEBUG log level output) debug = {{ DEBUG }} - -# Which backend scheme should Glance use by default is not specified -# in a request to add a new image to Glance? Known schemes are determined -# by the known_stores option below. -# Default: 'file' -# "default_store" option has been moved to [glance_store] section in -# Juno release - -# List of which store classes and store class locations are -# currently known to glance at startup. -# Existing but disabled stores: -# glance.store.rbd.Store, -# glance.store.s3.Store, -# glance.store.swift.Store, -# glance.store.sheepdog.Store, -# glance.store.cinder.Store, -# glance.store.gridfs.Store, -# glance.store.vmware_datastore.Store, -#known_stores = glance.store.filesystem.Store, -# glance.store.http.Store - - -# Maximum image size (in bytes) that may be uploaded through the -# Glance API server. Defaults to 1 TB. -# WARNING: this value should only be increased after careful consideration -# and must be set to a value under 8 EB (9223372036854775808). -#image_size_cap = 1099511627776 - -# Address to bind the API server +log_file = /var/log/glance/api.log bind_host = {{ image_host }} - -# Port the bind the API server to bind_port = 9292 - -# Log to this file. Make sure you do not set the same log file for both the API -# and registry servers! -# -# If `log_file` is omitted and `use_syslog` is false, then log messages are -# sent to stdout as a fallback. -log_file = /var/log/glance/api.log - -# Backlog requests when creating socket backlog = 4096 - -# TCP_KEEPIDLE value in seconds when creating socket. -# Not supported on OS X. -#tcp_keepidle = 600 - -# API to use for accessing data. Default value points to sqlalchemy -# package, it is also possible to use: glance.db.registry.api -# data_api = glance.db.sqlalchemy.api - -# Number of Glance API worker processes to start. -# On machines with more than one CPU increasing this value -# may improve performance (especially if using SSL with -# compression turned on). It is typically recommended to set -# this value to the number of CPUs present on your machine. -workers = 1 - -# Maximum line size of message headers to be accepted. -# max_header_line may need to be increased when using large tokens -# (typically those generated by the Keystone v3 API with big service -# catalogs) -# max_header_line = 16384 - -# Role used to identify an authenticated user as administrator -#admin_role = admin - -# Allow unauthenticated users to access the API with read-only -# privileges. This only applies when using ContextMiddleware. -#allow_anonymous_access = False - -# Allow access to version 1 of glance api -#enable_v1_api = True - -# Allow access to version 2 of glance api -#enable_v2_api = True - -# Return the URL that references where the data is stored on -# the backend storage system. For example, if using the -# file system store a URL of 'file:///path/to/image' will -# be returned to the user in the 'direct_url' meta-data field. -# The default value is false. -#show_image_direct_url = False - -# Send headers containing user and tenant information when making requests to -# the v1 glance registry. This allows the registry to function as if a user is -# authenticated without the need to authenticate a user itself using the -# auth_token middleware. -# The default value is false. -#send_identity_headers = False - -# Supported values for the 'container_format' image attribute -#container_formats=ami,ari,aki,bare,ovf,ova - -# Supported values for the 'disk_format' image attribute -#disk_formats=ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso - -# Directory to use for lock files. Default to a temp directory -# (string value). This setting needs to be the same for both -# glance-scrubber and glance-api. -#lock_path=<None> - -# Property Protections config file -# This file contains the rules for property protections and the roles/policies -# associated with it. -# If this config value is not specified, by default, property protections -# won't be enforced. -# If a value is specified and the file is not found, then the glance-api -# service will not start. -#property_protection_file = - -# Specify whether 'roles' or 'policies' are used in the -# property_protection_file. -# The default value for property_protection_rule_format is 'roles'. -#property_protection_rule_format = roles - -# Specifies how long (in hours) a task is supposed to live in the tasks DB -# after succeeding or failing before getting soft-deleted. -# The default value for task_time_to_live is 48 hours. -# task_time_to_live = 48 - -# This value sets what strategy will be used to determine the image location -# order. Currently two strategies are packaged with Glance 'location_order' -# and 'store_type'. -#location_strategy = location_order - -# ================= Syslog Options ============================ - -# Send logs to syslog (/dev/log) instead of to file specified -# by `log_file` -#use_syslog = False - -# Facility to use. If unset defaults to LOG_USER. -#syslog_log_facility = LOG_LOCAL0 - -# ================= SSL Options =============================== - -# Certificate file to use when starting API server securely -#cert_file = /path/to/certfile - -# Private key file to use when starting API server securely -#key_file = /path/to/keyfile - -# CA certificate file to use to verify connecting clients -#ca_file = /path/to/cafile - -# ================= Security Options ========================== - -# AES key for encrypting store 'location' metadata, including -# -- if used -- Swift or S3 credentials -# Should be set to a random string of length 16, 24 or 32 bytes -#metadata_encryption_key = <16, 24 or 32 char registry metadata key> - -# ============ Registry Options =============================== - -# Address to find the registry server +workers = {{ workers }} registry_host = {{ internal_ip }} - -# Port the registry server is listening on registry_port = 9191 - -# What protocol to use when connecting to the registry server? -# Set to https for secure HTTP communication registry_client_protocol = http +cinder_catalog_info = volume:cinder:internalURL -# The path to the key file to use in SSL connections to the -# registry server, if any. Alternately, you may set the -# GLANCE_CLIENT_KEY_FILE environ variable to a filepath of the key file -#registry_client_key_file = /path/to/key/file - -# The path to the cert file to use in SSL connections to the -# registry server, if any. Alternately, you may set the -# GLANCE_CLIENT_CERT_FILE environ variable to a filepath of the cert file -#registry_client_cert_file = /path/to/cert/file - -# The path to the certifying authority cert file to use in SSL connections -# to the registry server, if any. Alternately, you may set the -# GLANCE_CLIENT_CA_FILE environ variable to a filepath of the CA cert file -#registry_client_ca_file = /path/to/ca/file - -# When using SSL in connections to the registry server, do not require -# validation via a certifying authority. This is the registry's equivalent of -# specifying --insecure on the command line using glanceclient for the API -# Default: False -#registry_client_insecure = False - -# The period of time, in seconds, that the API server will wait for a registry -# request to complete. A value of '0' implies no timeout. -# Default: 600 -#registry_client_timeout = 600 - -# Whether to automatically create the database tables. -# Default: False -#db_auto_create = False - -# Enable DEBUG log messages from sqlalchemy which prints every database -# query and response. -# Default: False -#sqlalchemy_debug = True - -# Pass the user's token through for API requests to the registry. -# Default: True -#use_user_token = True - -# If 'use_user_token' is not in effect then admin credentials -# can be specified. Requests to the registry on behalf of -# the API will use these credentials. -# Admin user name -#admin_user = None -# Admin password -#admin_password = None -# Admin tenant name -#admin_tenant_name = None -# Keystone endpoint -#auth_url = None -# Keystone region -#auth_region = None -# Auth strategy -#auth_strategy = keystone - -# ============ Notification System Options ===================== - -# Notifications can be sent when images are create, updated or deleted. -# There are three methods of sending notifications, logging (via the -# log_file directive), rabbit (via a rabbitmq queue), qpid (via a Qpid -# message queue), or noop (no notifications sent, the default) -# NOTE: THIS CONFIGURATION OPTION HAS BEEN DEPRECATED IN FAVOR OF `notification_driver` -# notifier_strategy = default - -# Driver or drivers to handle sending notifications -# notification_driver = noop - -# Default publisher_id for outgoing notifications. -# default_publisher_id = image.localhost - -# Configuration options if sending notifications via rabbitmq (these are -# the defaults) -rabbit_host = localhost -rabbit_port = 5672 -rabbit_use_ssl = false -rabbit_userid = {{ RABBIT_USER }} -rabbit_password = {{ RABBIT_PASS }} -rabbit_virtual_host = / -rabbit_notification_exchange = glance -rabbit_notification_topic = notifications -rabbit_durable_queues = False - -# Configuration options if sending notifications via Qpid (these are -# the defaults) -qpid_notification_exchange = glance -qpid_notification_topic = notifications -qpid_hostname = localhost -qpid_port = 5672 -qpid_username = -qpid_password = -qpid_sasl_mechanisms = -qpid_reconnect_timeout = 0 -qpid_reconnect_limit = 0 -qpid_reconnect_interval_min = 0 -qpid_reconnect_interval_max = 0 -qpid_reconnect_interval = 0 -qpid_heartbeat = 5 -# Set to 'ssl' to enable SSL -qpid_protocol = tcp -qpid_tcp_nodelay = True - -# ============ Filesystem Store Options ======================== - -# Directory that the Filesystem backend store -# writes image data to -# this option has been moved to [glance_store] for Juno release -# filesystem_store_datadir = /var/lib/glance/images/ - -# A list of directories where image data can be stored. -# This option may be specified multiple times for specifying multiple store -# directories. Either one of filesystem_store_datadirs or -# filesystem_store_datadir option is required. A priority number may be given -# after each directory entry, separated by a ":". -# When adding an image, the highest priority directory will be selected, unless -# there is not enough space available in cases where the image size is already -# known. If no priority is given, it is assumed to be zero and the directory -# will be considered for selection last. If multiple directories have the same -# priority, then the one with the most free space available is selected. -# If same store is specified multiple times then BadStoreConfiguration -# exception will be raised. -#filesystem_store_datadirs = /var/lib/glance/images/:1 - -# A path to a JSON file that contains metadata describing the storage -# system. When show_multiple_locations is True the information in this -# file will be returned with any location that is contained in this -# store. -#filesystem_store_metadata_file = None - -# ============ Swift Store Options ============================= - -# Version of the authentication service to use -# Valid versions are '2' for keystone and '1' for swauth and rackspace -swift_store_auth_version = 2 - -# Address where the Swift authentication service lives -# Valid schemes are 'http://' and 'https://' -# If no scheme specified, default to 'https://' -# For swauth, use something like '127.0.0.1:8080/v1.0/' -swift_store_auth_address = 127.0.0.1:5000/v2.0/ - -# User to authenticate against the Swift authentication service -# If you use Swift authentication service, set it to 'account':'user' -# where 'account' is a Swift storage account and 'user' -# is a user in that account -swift_store_user = jdoe:jdoe - -# Auth key for the user authenticating against the -# Swift authentication service -swift_store_key = a86850deb2742ec3cb41518e26aa2d89 - -# Container within the account that the account should use -# for storing images in Swift -swift_store_container = glance - -# Do we create the container if it does not exist? -swift_store_create_container_on_put = False - -# What size, in MB, should Glance start chunking image files -# and do a large object manifest in Swift? By default, this is -# the maximum object size in Swift, which is 5GB -swift_store_large_object_size = 5120 - -# When doing a large object manifest, what size, in MB, should -# Glance write chunks to Swift? This amount of data is written -# to a temporary disk buffer during the process of chunking -# the image file, and the default is 200MB -swift_store_large_object_chunk_size = 200 - -# Whether to use ServiceNET to communicate with the Swift storage servers. -# (If you aren't RACKSPACE, leave this False!) -# -# To use ServiceNET for authentication, prefix hostname of -# `swift_store_auth_address` with 'snet-'. -# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/ -swift_enable_snet = False - -# If set to True enables multi-tenant storage mode which causes Glance images -# to be stored in tenant specific Swift accounts. -#swift_store_multi_tenant = False - -# A list of swift ACL strings that will be applied as both read and -# write ACLs to the containers created by Glance in multi-tenant -# mode. This grants the specified tenants/users read and write access -# to all newly created image objects. The standard swift ACL string -# formats are allowed, including: -# <tenant_id>:<username> -# <tenant_name>:<username> -# *:<username> -# Multiple ACLs can be combined using a comma separated list, for -# example: swift_store_admin_tenants = service:glance,*:admin -#swift_store_admin_tenants = - -# The region of the swift endpoint to be used for single tenant. This setting -# is only necessary if the tenant has multiple swift endpoints. -#swift_store_region = - -# If set to False, disables SSL layer compression of https swift requests. -# Setting to 'False' may improve performance for images which are already -# in a compressed format, eg qcow2. If set to True, enables SSL layer -# compression (provided it is supported by the target swift proxy). -#swift_store_ssl_compression = True +enable_v1_api = True +enable_v1_registry = True +enable_v2_api = True +enable_v2_registry = True -# The number of times a Swift download will be retried before the -# request fails -#swift_store_retry_get_count = 0 +notification_driver = messagingv2 +rpc_backend = rabbit -# ============ S3 Store Options ============================= - -# Address where the S3 authentication service lives -# Valid schemes are 'http://' and 'https://' -# If no scheme specified, default to 'http://' -s3_store_host = 127.0.0.1:8080/v1.0/ - -# User to authenticate against the S3 authentication service -s3_store_access_key = <20-char AWS access key> - -# Auth key for the user authenticating against the -# S3 authentication service -s3_store_secret_key = <40-char AWS secret key> - -# Container within the account that the account should use -# for storing images in S3. Note that S3 has a flat namespace, -# so you need a unique bucket name for your glance images. An -# easy way to do this is append your AWS access key to "glance". -# S3 buckets in AWS *must* be lowercased, so remember to lowercase -# your AWS access key if you use it in your bucket name below! -s3_store_bucket = <lowercased 20-char aws access key>glance - -# Do we create the bucket if it does not exist? -s3_store_create_bucket_on_put = False - -# When sending images to S3, the data will first be written to a -# temporary buffer on disk. By default the platform's temporary directory -# will be used. If required, an alternative directory can be specified here. -#s3_store_object_buffer_dir = /path/to/dir - -# When forming a bucket url, boto will either set the bucket name as the -# subdomain or as the first token of the path. Amazon's S3 service will -# accept it as the subdomain, but Swift's S3 middleware requires it be -# in the path. Set this to 'path' or 'subdomain' - defaults to 'subdomain'. -#s3_store_bucket_url_format = subdomain - -# ============ RBD Store Options ============================= - -# Ceph configuration file path -# If using cephx authentication, this file should -# include a reference to the right keyring -# in a client.<USER> section -#rbd_store_ceph_conf = /etc/ceph/ceph.conf - -# RADOS user to authenticate as (only applicable if using cephx) -# If <None>, a default will be chosen based on the client. section -# in rbd_store_ceph_conf -#rbd_store_user = <None> - -# RADOS pool in which images are stored -#rbd_store_pool = images - -# RADOS images will be chunked into objects of this size (in megabytes). -# For best performance, this should be a power of two -#rbd_store_chunk_size = 8 - -# ============ Sheepdog Store Options ============================= - -sheepdog_store_address = localhost - -sheepdog_store_port = 7000 - -# Images will be chunked into objects of this size (in megabytes). -# For best performance, this should be a power of two -sheepdog_store_chunk_size = 64 - -# ============ Cinder Store Options =============================== - -# Info to match when looking for cinder in the service catalog -# Format is : separated values of the form: -# <service_type>:<service_name>:<endpoint_type> (string value) -#cinder_catalog_info = volume:cinder:publicURL - -# Override service catalog lookup with template for cinder endpoint -# e.g. http://localhost:8776/v1/%(project_id)s (string value) -#cinder_endpoint_template = <None> - -# Region name of this node (string value) -#os_region_name = <None> - -# Location of ca certicates file to use for cinder client requests -# (string value) -#cinder_ca_certificates_file = <None> - -# Number of cinderclient retries on failed http calls (integer value) -#cinder_http_retries = 3 - -# Allow to perform insecure SSL requests to cinder (boolean value) -#cinder_api_insecure = False - -# ============ VMware Datastore Store Options ===================== - -# ESX/ESXi or vCenter Server target system. -# The server value can be an IP address or a DNS name -# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com -#vmware_server_host = <None> - -# Server username (string value) -#vmware_server_username = <None> - -# Server password (string value) -#vmware_server_password = <None> - -# Inventory path to a datacenter (string value) -# Value optional when vmware_server_ip is an ESX/ESXi host: if specified -# should be `ha-datacenter`. -#vmware_datacenter_path = <None> - -# Datastore associated with the datacenter (string value) -#vmware_datastore_name = <None> - -# The number of times we retry on failures -# e.g., socket error, etc (integer value) -#vmware_api_retry_count = 10 - -# The interval used for polling remote tasks -# invoked on VMware ESX/VC server in seconds (integer value) -#vmware_task_poll_interval = 5 - -# Absolute path of the folder containing the images in the datastore -# (string value) -#vmware_store_image_dir = /openstack_glance - -# Allow to perform insecure SSL requests to the target system (boolean value) -#vmware_api_insecure = False - -# ============ Delayed Delete Options ============================= - -# Turn on/off delayed delete delayed_delete = False - -# Delayed delete time in seconds -scrub_time = 43200 - -# Directory that the scrubber will use to remind itself of what to delete -# Make sure this is also set in glance-scrubber.conf scrubber_datadir = /var/lib/glance/scrubber - -# =============== Quota Options ================================== - -# The maximum number of image members allowed per image -#image_member_quota = 128 - -# The maximum number of image properties allowed per image -#image_property_quota = 128 - -# The maximum number of tags allowed per image -#image_tag_quota = 128 - -# The maximum number of locations allowed per image -#image_location_quota = 10 - -# Set a system wide quota for every user. This value is the total number -# of bytes that a user can use across all storage systems. A value of -# 0 means unlimited. -#user_storage_quota = 0 - -# =============== Image Cache Options ============================= - -# Base directory that the Image Cache uses +scrub_time = 43200 image_cache_dir = /var/lib/glance/image-cache/ +show_image_direct_url = True -# =============== Manager Options ================================= - -# DEPRECATED. TO BE REMOVED IN THE JUNO RELEASE. -# Whether or not to enforce that all DB tables have charset utf8. -# If your database tables do not have charset utf8 you will -# need to convert before this option is removed. This option is -# only relevant if your database engine is MySQL. -#db_enforce_mysql_charset = True - -# =============== Glance Store ==================================== -[glance_store] -# Moved from [DEFAULT], for Juno release -default_store = file -filesystem_store_datadir = /var/lib/glance/images/ - -# =============== Database Options ================================= +[task] +task_executor = taskflow [database] -# The file name to use with SQLite (string value) -sqlite_db = /var/lib/glance/glance.sqlite - -# If True, SQLite uses synchronous mode (boolean value) -#sqlite_synchronous = True - -# The backend to use for db (string value) -# Deprecated group/name - [DEFAULT]/db_backend backend = sqlalchemy - -# The SQLAlchemy connection string used to connect to the -# database (string value) -# Deprecated group/name - [DEFAULT]/sql_connection -# Deprecated group/name - [DATABASE]/sql_connection -# Deprecated group/name - [sql]/connection -#connection = <None> -connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance - -# The SQL mode to be used for MySQL sessions. This option, -# including the default, overrides any server-set SQL mode. To -# use whatever SQL mode is set by the server configuration, -# set this to no value. Example: mysql_sql_mode= (string -# value) -#mysql_sql_mode = TRADITIONAL - -# Timeout before idle sql connections are reaped (integer -# value) -# Deprecated group/name - [DEFAULT]/sql_idle_timeout -# Deprecated group/name - [DATABASE]/sql_idle_timeout -# Deprecated group/name - [sql]/idle_timeout +connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance?charset=utf8 idle_timeout = 30 -# Minimum number of SQL connections to keep open in a pool -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_min_pool_size -# Deprecated group/name - [DATABASE]/sql_min_pool_size -#min_pool_size = 1 - -# Maximum number of SQL connections to keep open in a pool -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_pool_size -# Deprecated group/name - [DATABASE]/sql_max_pool_size -#max_pool_size = <None> - -# Maximum db connection retries during startup. (setting -1 -# implies an infinite retry count) (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_retries -# Deprecated group/name - [DATABASE]/sql_max_retries -#max_retries = 10 - -# Interval between retries of opening a sql connection -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_retry_interval -# Deprecated group/name - [DATABASE]/reconnect_interval -#retry_interval = 10 - -# If set, use this value for max_overflow with sqlalchemy -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_overflow -# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow -#max_overflow = <None> - -# Verbosity of SQL debugging information. 0=None, -# 100=Everything (integer value) -# Deprecated group/name - [DEFAULT]/sql_connection_debug -#connection_debug = 0 - -# Add python stack traces to SQL as comment strings (boolean -# value) -# Deprecated group/name - [DEFAULT]/sql_connection_trace -#connection_trace = False - -# If set, use this value for pool_timeout with sqlalchemy -# (integer value) -# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout -#pool_timeout = <None> - -# Enable the experimental use of database reconnect on -# connection lost (boolean value) -#use_db_reconnect = False - -# seconds between db connection retries (integer value) -#db_retry_interval = 1 - -# Whether to increase interval between db connection retries, -# up to db_max_retry_interval (boolean value) -#db_inc_retry_interval = True - -# max seconds between db connection retries, if -# db_inc_retry_interval is enabled (integer value) -#db_max_retry_interval = 10 +[glance_store] +default_store = file +stores = file,http,cinder,rbd +filesystem_store_datadir = /var/lib/glance/images/ -# maximum db connection retries before error is raised. -# (setting -1 implies an infinite retry count) (integer value) -#db_max_retries = 20 +[profiler] +enabled = True [keystone_authtoken] auth_uri = http://{{ internal_vip.ip }}:5000/v2.0 @@ -658,20 +58,22 @@ identity_uri = http://{{ internal_vip.ip }}:35357 admin_tenant_name = service admin_user = glance admin_password = {{ GLANCE_PASS }} +memcached_servers = {{ memcached_servers }} +token_cache_time = 300 +revocation_cache_time = 60 [paste_deploy] -# Name of the paste configuration file that defines the available pipelines -#config_file = glance-api-paste.ini - -# Partial name of a pipeline in your paste configuration file with the -# service name removed. For example, if your paste section name is -# [pipeline:glance-api-keystone], you would configure the flavor below -# as 'keystone'. flavor= keystone -[store_type_location_strategy] -# The scheme list to use to get store preference order. The scheme must be -# registered by one of the stores defined by the 'known_stores' config option. -# This option will be applied when you using 'store_type' option as image -# location strategy defined by the 'location_strategy' config option. -#store_type_preference = +[oslo_messaging_amqp] +idle_timeout = 7200 + +[oslo_messaging_rabbit] +rabbit_hosts = {{ rabbitmq_servers }} +rabbit_use_ssl = false +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +rabbit_virtual_host = / +rabbit_notification_exchange = glance +rabbit_notification_topic = notifications +rabbit_durable_queues = False diff --git a/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf b/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf index 06c403fd..8453b966 100644 --- a/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf +++ b/deploy/adapters/ansible/roles/glance/templates/glance-registry.conf @@ -1,176 +1,33 @@ -[DEFAULT] -# Show more verbose log output (sets INFO log level output) -#verbose = False - -# Show debugging output in logs (sets DEBUG log level output) -#debug = False - -# Address to bind the registry server -bind_host = {{ internal_ip }} +{% set workers = ansible_processor_vcpus // 2 %} +{% set workers = workers if workers else 1 %} +{% set memcached_servers = [] %} +{% set rabbitmq_servers = [] %} +{% for host in haproxy_hosts.values() %} +{% set _ = memcached_servers.append('%s:11211'% host) %} +{% set _ = rabbitmq_servers.append('%s:5672'% host) %} +{% endfor %} +{% set memcached_servers = memcached_servers|join(',') %} +{% set rabbitmq_servers = rabbitmq_servers|join(',') %} -# Port the bind the registry server to +[DEFAULT] +verbose = {{ VERBOSE }} +debug = {{ DEBUG }} +log_file = /var/log/glance/api.log +bind_host = {{ image_host }} bind_port = 9191 - -# Log to this file. Make sure you do not set the same log file for both the API -# and registry servers! -# -# If `log_file` is omitted and `use_syslog` is false, then log messages are -# sent to stdout as a fallback. -log_file = /var/log/glance/registry.log - -# Backlog requests when creating socket backlog = 4096 +workers = {{ workers }} -# TCP_KEEPIDLE value in seconds when creating socket. -# Not supported on OS X. -#tcp_keepidle = 600 - -# API to use for accessing data. Default value points to sqlalchemy -# package. -#data_api = glance.db.sqlalchemy.api - -# Enable Registry API versions individually or simultaneously -#enable_v1_registry = True -#enable_v2_registry = True - -# Limit the api to return `param_limit_max` items in a call to a container. If -# a larger `limit` query param is provided, it will be reduced to this value. -api_limit_max = 1000 - -# If a `limit` query param is not provided in an api request, it will -# default to `limit_param_default` -limit_param_default = 25 - -# Role used to identify an authenticated user as administrator -#admin_role = admin - -# Whether to automatically create the database tables. -# Default: False -#db_auto_create = False - -# Enable DEBUG log messages from sqlalchemy which prints every database -# query and response. -# Default: False -#sqlalchemy_debug = True - -# ================= Syslog Options ============================ - -# Send logs to syslog (/dev/log) instead of to file specified -# by `log_file` -#use_syslog = False - -# Facility to use. If unset defaults to LOG_USER. -#syslog_log_facility = LOG_LOCAL1 - -# ================= SSL Options =============================== - -# Certificate file to use when starting registry server securely -#cert_file = /path/to/certfile - -# Private key file to use when starting registry server securely -#key_file = /path/to/keyfile - -# CA certificate file to use to verify connecting clients -#ca_file = /path/to/cafile - -# ================= Database Options ========================== +notification_driver = messagingv2 +rpc_backend = rabbit [database] -# The file name to use with SQLite (string value) -sqlite_db = /var/lib/glance/glance.sqlite - -# If True, SQLite uses synchronous mode (boolean value) -#sqlite_synchronous = True - -# The backend to use for db (string value) -# Deprecated group/name - [DEFAULT]/db_backend backend = sqlalchemy - -# The SQLAlchemy connection string used to connect to the -# database (string value) -# Deprecated group/name - [DEFAULT]/sql_connection -# Deprecated group/name - [DATABASE]/sql_connection -# Deprecated group/name - [sql]/connection -#connection = <None> -connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance - -# The SQL mode to be used for MySQL sessions. This option, -# including the default, overrides any server-set SQL mode. To -# use whatever SQL mode is set by the server configuration, -# set this to no value. Example: mysql_sql_mode= (string -# value) -#mysql_sql_mode = TRADITIONAL - -# Timeout before idle sql connections are reaped (integer -# value) -# Deprecated group/name - [DEFAULT]/sql_idle_timeout -# Deprecated group/name - [DATABASE]/sql_idle_timeout -# Deprecated group/name - [sql]/idle_timeout +connection = mysql://glance:{{ GLANCE_DBPASS }}@{{ db_host }}/glance?charset=utf8 idle_timeout = 30 -# Minimum number of SQL connections to keep open in a pool -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_min_pool_size -# Deprecated group/name - [DATABASE]/sql_min_pool_size -#min_pool_size = 1 - -# Maximum number of SQL connections to keep open in a pool -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_pool_size -# Deprecated group/name - [DATABASE]/sql_max_pool_size -#max_pool_size = <None> - -# Maximum db connection retries during startup. (setting -1 -# implies an infinite retry count) (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_retries -# Deprecated group/name - [DATABASE]/sql_max_retries -#max_retries = 10 - -# Interval between retries of opening a sql connection -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_retry_interval -# Deprecated group/name - [DATABASE]/reconnect_interval -#retry_interval = 10 - -# If set, use this value for max_overflow with sqlalchemy -# (integer value) -# Deprecated group/name - [DEFAULT]/sql_max_overflow -# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow -#max_overflow = <None> - -# Verbosity of SQL debugging information. 0=None, -# 100=Everything (integer value) -# Deprecated group/name - [DEFAULT]/sql_connection_debug -#connection_debug = 0 - -# Add python stack traces to SQL as comment strings (boolean -# value) -# Deprecated group/name - [DEFAULT]/sql_connection_trace -#connection_trace = False - -# If set, use this value for pool_timeout with sqlalchemy -# (integer value) -# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout -#pool_timeout = <None> - -# Enable the experimental use of database reconnect on -# connection lost (boolean value) -#use_db_reconnect = False - -# seconds between db connection retries (integer value) -#db_retry_interval = 1 - -# Whether to increase interval between db connection retries, -# up to db_max_retry_interval (boolean value) -#db_inc_retry_interval = True - -# max seconds between db connection retries, if -# db_inc_retry_interval is enabled (integer value) -#db_max_retry_interval = 10 - -# maximum db connection retries before error is raised. -# (setting -1 implies an infinite retry count) (integer value) -#db_max_retries = 20 +[profiler] +enabled = True [keystone_authtoken] auth_uri = http://{{ internal_vip.ip }}:5000/v2.0 @@ -178,13 +35,22 @@ identity_uri = http://{{ internal_vip.ip }}:35357 admin_tenant_name = service admin_user = glance admin_password = {{ GLANCE_PASS }} +memcached_servers = {{ memcached_servers }} +token_cache_time = 300 +revocation_cache_time = 60 [paste_deploy] -# Name of the paste configuration file that defines the available pipelines -#config_file = glance-registry-paste.ini - -# Partial name of a pipeline in your paste configuration file with the -# service name removed. For example, if your paste section name is -# [pipeline:glance-registry-keystone], you would configure the flavor below -# as 'keystone'. flavor= keystone + +[oslo_messaging_amqp] +idle_timeout = 7200 + +[oslo_messaging_rabbit] +rabbit_hosts = {{ rabbitmq_servers }} +rabbit_use_ssl = false +rabbit_userid = {{ RABBIT_USER }} +rabbit_password = {{ RABBIT_PASS }} +rabbit_virtual_host = / +rabbit_notification_exchange = glance +rabbit_notification_topic = notifications +rabbit_durable_queues = False diff --git a/deploy/adapters/ansible/roles/ha/templates/haproxy.cfg b/deploy/adapters/ansible/roles/ha/templates/haproxy.cfg index edbd998d..5f0679ff 100644 --- a/deploy/adapters/ansible/roles/ha/templates/haproxy.cfg +++ b/deploy/adapters/ansible/roles/ha/templates/haproxy.cfg @@ -56,6 +56,7 @@ listen proxy-glance_registry_cluster bind {{ public_vip.ip }}:9191 option tcpka option tcplog + option httpchk balance source {% for host,ip in haproxy_hosts.items() %} server {{ host }} {{ ip }}:9191 weight 1 check inter 2000 rise 2 fall 5 @@ -66,6 +67,7 @@ listen proxy-glance_api_cluster bind {{ public_vip.ip }}:9292 option tcpka option tcplog + option httpchk balance source {% for host,ip in haproxy_hosts.items() %} server {{ host }} {{ ip }}:9292 weight 1 check inter 2000 rise 2 fall 5 @@ -76,6 +78,7 @@ listen proxy-nova-novncproxy bind {{ public_vip.ip }}:6080 option tcpka option tcplog + option httpchk balance source {% for host,ip in haproxy_hosts.items() %} server {{ host }} {{ ip }}:6080 weight 1 check inter 2000 rise 2 fall 5 @@ -87,6 +90,7 @@ listen proxy-network option tcpka option tcplog balance source + option httpchk {% for host,ip in haproxy_hosts.items() %} server {{ host }} {{ ip }}:9696 weight 1 check inter 2000 rise 2 fall 5 {% endfor %} @@ -140,6 +144,7 @@ listen proxy-nova_metadata_api_cluster bind {{ public_vip.ip }}:8775 option tcpka option tcplog + option httpchk balance source {% for host,ip in haproxy_hosts.items() %} server {{ host }} {{ ip }}:8775 weight 1 check inter 2000 rise 2 fall 5 @@ -175,6 +180,7 @@ listen proxy-dashboarad cookie SERVERID insert indirect nocache option forwardfor option httpchk + option httpchk option httpclose rspidel ^Set-cookie:\ IP= {% for host,ip in haproxy_hosts.items() %} |