summaryrefslogtreecommitdiffstats
path: root/deploy/adapters
diff options
context:
space:
mode:
Diffstat (limited to 'deploy/adapters')
-rw-r--r--deploy/adapters/ansible/roles/config-osa/files/chrony.conf.j2104
-rwxr-xr-xdeploy/adapters/ansible/roles/config-osa/tasks/main.yml5
-rw-r--r--deploy/adapters/ansible/roles/config-osa/templates/user_variables.yml.j22
3 files changed, 110 insertions, 1 deletions
diff --git a/deploy/adapters/ansible/roles/config-osa/files/chrony.conf.j2 b/deploy/adapters/ansible/roles/config-osa/files/chrony.conf.j2
new file mode 100644
index 00000000..1c2443e0
--- /dev/null
+++ b/deploy/adapters/ansible/roles/config-osa/files/chrony.conf.j2
@@ -0,0 +1,104 @@
+# {{ ansible_managed }}
+#
+# This the default chrony.conf file for the Debian chrony package. After
+# editing this file use the command 'invoke-rc.d chrony restart' to make
+# your changes take effect. John Hasler <jhasler@debian.org> 1998-2008
+
+# See www.pool.ntp.org for an explanation of these servers. Please
+# consider joining the project if possible. If you can't or don't want to
+# use these servers I suggest that you try your ISP's nameservers. We mark
+# the servers 'offline' so that chronyd won't try to connect when the link
+# is down. Scripts in /etc/ppp/ip-up.d and /etc/ppp/ip-down.d use chronyc
+# commands to switch it on when a dialup link comes up and off when it goes
+# down. Code in /etc/init.d/chrony attempts to determine whether or not
+# the link is up at boot time and set the online status accordingly. If
+# you have an always-on connection such as cable omit the 'offline'
+# directive and chronyd will default to online.
+#
+# Note that if Chrony tries to go "online" and dns lookup of the servers
+# fails they will be discarded. Thus under some circumstances it is
+# better to use IP numbers than host names.
+
+{% for ntp_server in security_ntp_servers %}
+server {{ ntp_server }} maxpoll 10 minpoll 8
+{% endfor %}
+
+# Look here for the admin password needed for chronyc. The initial
+# password is generated by a random process at install time. You may
+# change it if you wish.
+
+keyfile /etc/chrony/chrony.keys
+
+# Set runtime command key. Note that if you change the key (not the
+# password) to anything other than 1 you will need to edit
+# /etc/ppp/ip-up.d/chrony, /etc/ppp/ip-down.d/chrony, /etc/init.d/chrony
+# and /etc/cron.weekly/chrony as these scripts use it to get the password.
+
+commandkey 1
+
+# I moved the driftfile to /var/lib/chrony to comply with the Debian
+# filesystem standard.
+
+driftfile /var/lib/chrony/chrony.drift
+
+# Comment this line out to turn off logging.
+
+log tracking measurements statistics
+logdir /var/log/chrony
+
+# Stop bad estimates upsetting machine clock.
+
+maxupdateskew 100.0
+
+# Dump measurements when daemon exits.
+
+dumponexit
+
+# Specify directory for dumping measurements.
+
+dumpdir /var/lib/chrony
+
+# Let computer be a server when it is unsynchronised.
+
+local stratum 10
+
+# Allow computers on the unrouted nets to use the server.
+
+{% for subnet in security_allowed_ntp_subnets %}
+allow {{ subnet }}
+{% endfor %}
+
+# This directive forces `chronyd' to send a message to syslog if it
+# makes a system clock adjustment larger than a threshold value in seconds.
+
+logchange 0.5
+
+# This directive defines an email address to which mail should be sent
+# if chronyd applies a correction exceeding a particular threshold to the
+# system clock.
+
+# mailonchange root@localhost 0.5
+
+# This directive tells chrony to regulate the real-time clock and tells it
+# Where to store related data. It may not work on some newer motherboards
+# that use the HPET real-time clock. It requires enhanced real-time
+# support in the kernel. I've commented it out because with certain
+# combinations of motherboard and kernel it is reported to cause lockups.
+
+# rtcfile /var/lib/chrony/chrony.rtc
+
+# If the last line of this file reads 'rtconutc' chrony will assume that
+# the CMOS clock is on UTC (GMT). If it reads '# rtconutc' or is absent
+# chrony will assume local time. The line (if any) was written by the
+# chrony postinst based on what it found in /etc/default/rcS. You may
+# change it if necessary.
+rtconutc
+
+{% if security_ntp_bind_local_interfaces_only | bool %}
+# Listen for NTP requests only on local interfaces.
+port 0
+bindcmdaddress 127.0.0.1
+{% if not security_disable_ipv6 | bool %}
+bindcmdaddress ::1
+{% endif %}
+{% endif %}
diff --git a/deploy/adapters/ansible/roles/config-osa/tasks/main.yml b/deploy/adapters/ansible/roles/config-osa/tasks/main.yml
index 4fd5dd83..f9eef749 100755
--- a/deploy/adapters/ansible/roles/config-osa/tasks/main.yml
+++ b/deploy/adapters/ansible/roles/config-osa/tasks/main.yml
@@ -101,6 +101,11 @@
delay: 10
when: hostvars[hostvars[inventory_hostname]['groups']['controller'][0]]['local_mirror'] == 'CentOS'
+- name: copy chrony.conf
+ copy:
+ src: chrony.conf.j2
+ dest: /etc/ansible/roles/ansible-hardening/templates/
+
- name: update the directory of chrony key
lineinfile:
dest: /etc/ansible/roles/ansible-hardening/templates/chrony.conf.j2
diff --git a/deploy/adapters/ansible/roles/config-osa/templates/user_variables.yml.j2 b/deploy/adapters/ansible/roles/config-osa/templates/user_variables.yml.j2
index 5fa999a5..130b5ad1 100644
--- a/deploy/adapters/ansible/roles/config-osa/templates/user_variables.yml.j2
+++ b/deploy/adapters/ansible/roles/config-osa/templates/user_variables.yml.j2
@@ -65,4 +65,4 @@ neutron_provider_networks:
security_sshd_permit_root_login: yes
security_ntp_servers:
- - 45.79.111.114
+ - {{ ntp_server }}