diff options
Diffstat (limited to 'deploy/adapters/cobbler')
| -rw-r--r-- | deploy/adapters/cobbler/kickstarts/default16-aarch64.seed | 160 | ||||
| -rw-r--r-- | deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config | 2 |
2 files changed, 162 insertions, 0 deletions
diff --git a/deploy/adapters/cobbler/kickstarts/default16-aarch64.seed b/deploy/adapters/cobbler/kickstarts/default16-aarch64.seed new file mode 100644 index 00000000..13dae5c6 --- /dev/null +++ b/deploy/adapters/cobbler/kickstarts/default16-aarch64.seed @@ -0,0 +1,160 @@ +# Mostly based on the Ubuntu installation guide +# https://help.ubuntu.com/12.04/installation-guide/ + +## Figure out if we're kickstarting a system or a profile +#if $getVar('system_name','') != '' +#set $what = "system" +#else +#set $what = "profile" +#end if + +# Preseeding only locale sets language, country and locale. +d-i debian-installer/locale string en_US +d-i debian-installer/country string US +d-i debian-installer/language string en + +d-i debian-installer/splash boolean false +d-i debian-installer/quiet boolean false +d-i debian-installer/framebuffer boolean true +d-i hw-detect/load_firmware boolean true + +# Keyboard selection. +# Disable automatic (interactive) keymap detection. +d-i console-setup/ask_detect boolean false +d-i console-setup/layoutcode string us +d-i console-setup/modelcode string SKIP +d-i keyboard-configuration/variantcode string us +d-i keyboard-configuration/layoutcode string us +d-i keyboard-configuration/model select Generic 105-key (Intl) PC +d-i console-keymaps-at/keymap select us +d-i keyboard-configuration/xkb-keymap select us + +d-i preseed/early_command string \ +wget -O- \ +http://$http_server/cblr/svc/op/script/$what/$name/?script=preseed_early_default | /bin/sh -s; \ +debconf-set-selections /tmp/pre_install_network_config + +$SNIPPET('preseed_network_config') + +# Partition disk manually +d-i partman-auto/disk string /dev/sda +d-i partman-auto/method string regular +d-i partman-lvm/device_remove_lvm boolean true +d-i partman-md/device_remove_md boolean true +d-i partman-auto/choose_recipe select atomic +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +# NTP/Time Setup +#if $getVar('timezone', '') != "" +d-i time/zone string $timezone +#else +d-i time/zone string US/Pacific +#end if +d-i clock-setup/utc boolean true +d-i clock-setup/ntp boolean true +#if $getVar('ntp_server', '') == "" +d-i clock-setup/ntp-server string 0.ubuntu.pool.ntp.org +#else +d-i clock-setup/ntp-server string $ntp_server +#end if + +# Setup the installation source +d-i mirror/country string manual +d-i mirror/http/hostname string $http_server +d-i mirror/http/directory string $install_source_directory +d-i mirror/http/proxy string +d-i mirror/http/mirror select $http_server +d-i mirror/protocol select http +d-i mirror/udeb/components multiselect main, restricted + +#set $os_v = $getVar('os_version','') +#if $os_v and $os_v.lower()[0] > 'p' +# Required at least for 12.10+ +d-i live-installer/net-image string http://$http_server/cobbler/ks_mirror/$distro_name/install/filesystem.squashfs +#end if + +# root account and password +#if $getVar('username', 'root') != "root" +d-i passwd/root-login boolean false +d-i passwd/make-user boolean true +d-i user-setup/allow-password-weak boolean true +d-i passwd/root-password password root +d-i passwd/root-password-again password root + #set username = $getVar('username', 'root') +d-i passwd/user-fullname string $username +d-i passwd/username string $username + #if $getVar('password', '') != "" +d-i passwd/user-password-crypted password $password + #else +d-i passwd/user-password password $username +d-i passwd/user-password-again password $username + #end if +#else +d-i passwd/root-login boolean true +d-i passwd/make-user boolean false +d-i user-setup/allow-password-weak boolean true + #if $getVar('password', '') != "" +d-i passwd/root-password-crypted password $password + #else +d-i passwd/root-password password root +d-i passwd/root-password-again password root + #end if +#end if + +$SNIPPET('preseed_apt_repo_config') + +# Individual additional packages to install +# wget is REQUIRED otherwise quite a few things won't work +# later in the build (like late-command scripts) +#if $getVar('tool', '') != '' + #set $preseed_software = "preseed_software_%s" % $tool +$SNIPPET($preseed_software) +#else +d-i pkgsel/include string ntp ssh openssh-server wget vim bridge-utils ifenslave vlan +#end if + +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +d-i pkgsel/upgrade select none +d-i popularity-contest/participate boolean false +d-i lilo-installer/skip boolean true +d-i grub-installer/only_debian boolean true + +# Use the following option to add additional boot parameters for the +# installed system (if supported by the bootloader installer). +# Note: options passed to the installer will be added automatically. +d-i debian-installer/add-kernel-opts string $kernel_options_post +d-i debian-installer/allow_unauthenticated string true + +d-i finish-install/late_command string update-grub +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note + +# This will prevent the installer from ejecting the CD during the reboot, +# which is useful in some situations. +d-i cdrom-detect/eject boolean false + +# This command is run just before the install finishes, but when there is +# still a usable /target directory. You can chroot to /target and use it +# directly, or use the apt-install and in-target commands to easily install +# packages and run commands in the target system. +# d-i preseed/late_command string [command] +d-i preseed/late_command string \ +in-target sed -i '$a UseDNS no' /etc/ssh/sshd_config; \ +in-target sed -i 's/.*GSSAPIAuthentication.*/GSSAPIAuthentication no/g' /etc/ssh/sshd_config; \ +in-target sed -i '$d' /usr/share/initramfs-tools/scripts/local-top/lvm2; \ +in-target echo "lvm vgchange -ay" >> /usr/share/initramfs-tools/scripts/local-top/lvm2; \ +in-target echo "exit 0" >> /usr/share/initramfs-tools/scripts/local-top/lvm2; \ +in-target touch /etc/initramfs-tools/scripts/local-top/lvm2; \ +in-target chmod 777 /etc/initramfs-tools/scripts/local-top/lvm2; \ +in-target echo "vgchange -a y" >> /etc/initramfs-tools/scripts/local-top/lvm2; \ +wget -O- \ + http://$http_server/cblr/svc/op/script/$what/$name/?script=preseed_late_default | \ + chroot /target /bin/sh -s; cp /target/etc/network/interfaces /etc/network/interfaces; \ +in-target update-initramfs -k `uname -r` -c; \ +in-target update-grub; \ +in-target apt-get install python2.7; \ +in-target ln -s /usr/bin/python2.7 /usr/bin/python diff --git a/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config b/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config index 6ea56c56..591313b5 100644 --- a/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config +++ b/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config @@ -29,6 +29,8 @@ $SNIPPET($repos_snippet) #if $arch == "x86_64" #set $rarch = "[arch=amd64]" +#elif $arch == "arm" + #set $rarch = "[arch=arm64]" #else #set $rarch = "[arch=%s]" % $arch #end if |