summaryrefslogtreecommitdiffstats
path: root/deploy/adapters/cobbler/snippets
diff options
context:
space:
mode:
Diffstat (limited to 'deploy/adapters/cobbler/snippets')
-rw-r--r--deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/12.04/preseed_repos16
-rw-r--r--deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/14.04/preseed_repos16
-rw-r--r--deploy/adapters/cobbler/snippets/cobbler_register26
-rw-r--r--deploy/adapters/cobbler/snippets/download_config_files36
-rw-r--r--deploy/adapters/cobbler/snippets/download_config_files_deb44
-rw-r--r--deploy/adapters/cobbler/snippets/func_install_if_enabled8
-rw-r--r--deploy/adapters/cobbler/snippets/func_register_if_enabled52
-rw-r--r--deploy/adapters/cobbler/snippets/hosts.xml50
-rw-r--r--deploy/adapters/cobbler/snippets/kdump.xml70
-rw-r--r--deploy/adapters/cobbler/snippets/keep_cfengine_keys190
-rw-r--r--deploy/adapters/cobbler/snippets/keep_files308
-rw-r--r--deploy/adapters/cobbler/snippets/keep_rhn_keys176
-rw-r--r--deploy/adapters/cobbler/snippets/keep_ssh_host_keys228
-rw-r--r--deploy/adapters/cobbler/snippets/koan_environment8
-rw-r--r--deploy/adapters/cobbler/snippets/limits_conf.xml122
-rw-r--r--deploy/adapters/cobbler/snippets/log_ks_post4
-rw-r--r--deploy/adapters/cobbler/snippets/log_ks_pre24
-rw-r--r--deploy/adapters/cobbler/snippets/networking.xml262
-rw-r--r--deploy/adapters/cobbler/snippets/ntp.xml32
-rw-r--r--deploy/adapters/cobbler/snippets/post_koan_add_reinstall_entry12
-rw-r--r--deploy/adapters/cobbler/snippets/post_s390_reboot134
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_ansible2
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_apt_repo_config54
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef26
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef-admin.pem16
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef-validator.pem16
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef_init62
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef_rsyslog.conf20
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_chef_run.sh210
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_client.rb70
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_gem_local_repo46
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_hosts30
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_knife.rb64
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_limits.conf108
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_network_config46
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_ntp140
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_partition_disks46
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_post_anamon160
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config135
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_post_install_kernel_options28
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_post_install_network_config1260
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_post_partition_disks78
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_pre_anamon8
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_pre_install_network_config150
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_pre_partition_disks1346
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_rsyslog.conf134
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_software_ansible2
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_software_chef2
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_ssh72
-rw-r--r--deploy/adapters/cobbler/snippets/preseed_sysctl.conf144
-rw-r--r--deploy/adapters/cobbler/snippets/proxy.xml18
-rw-r--r--deploy/adapters/cobbler/snippets/puppet_install_if_enabled8
-rw-r--r--deploy/adapters/cobbler/snippets/puppet_register_if_enabled30
-rw-r--r--deploy/adapters/cobbler/snippets/redhat_register36
-rw-r--r--deploy/adapters/cobbler/snippets/repo_config.xml34
-rw-r--r--deploy/adapters/cobbler/snippets/restore_boot_device12
-rw-r--r--deploy/adapters/cobbler/snippets/rhn_certificate_based_register24
-rw-r--r--deploy/adapters/cobbler/snippets/rsyslog.xml142
-rw-r--r--deploy/adapters/cobbler/snippets/save_boot_device10
-rw-r--r--deploy/adapters/cobbler/snippets/software_chef.xml4
-rw-r--r--deploy/adapters/cobbler/snippets/ssh.xml92
-rw-r--r--deploy/adapters/cobbler/snippets/sshd.xml284
62 files changed, 3493 insertions, 3494 deletions
diff --git a/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/12.04/preseed_repos b/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/12.04/preseed_repos
index 8d70dafa..d72a2666 100644
--- a/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/12.04/preseed_repos
+++ b/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/12.04/preseed_repos
@@ -1,8 +1,8 @@
-cat << EOF >> /etc/apt/sources.list
-deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ precise-proposed main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
-EOF
-
+cat << EOF >> /etc/apt/sources.list
+deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ precise-proposed main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse
+EOF
+
diff --git a/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/14.04/preseed_repos b/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/14.04/preseed_repos
index 86ad7130..2eb0b275 100644
--- a/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/14.04/preseed_repos
+++ b/deploy/adapters/cobbler/snippets/apt.repos.d/ubuntu/14.04/preseed_repos
@@ -1,8 +1,8 @@
-cat << EOF >> /etc/apt/sources.list
-deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ trusty-proposed main restricted universe multiverse
-deb http://archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
-EOF
-
+cat << EOF >> /etc/apt/sources.list
+deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ trusty-security main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ trusty-proposed main restricted universe multiverse
+deb http://archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
+EOF
+
diff --git a/deploy/adapters/cobbler/snippets/cobbler_register b/deploy/adapters/cobbler/snippets/cobbler_register
index 8067ec32..87dbb370 100644
--- a/deploy/adapters/cobbler/snippets/cobbler_register
+++ b/deploy/adapters/cobbler/snippets/cobbler_register
@@ -1,13 +1,13 @@
-# Begin cobbler registration
-#if $getVar('system_name','') == ''
-#if $str($getVar('register_new_installs','')) in [ "1", "true", "yes", "y" ]
-if [ -f "/usr/bin/cobbler-register" ]; then
- cobbler-register --server=$server --fqdn '*AUTO*' --profile=$profile_name --batch
-fi
-#else
-# cobbler registration is disabled in /etc/cobbler/settings
-#end if
-#else
-# skipping for system-based installation
-#end if
-# End cobbler registration
+# Begin cobbler registration
+#if $getVar('system_name','') == ''
+#if $str($getVar('register_new_installs','')) in [ "1", "true", "yes", "y" ]
+if [ -f "/usr/bin/cobbler-register" ]; then
+ cobbler-register --server=$server --fqdn '*AUTO*' --profile=$profile_name --batch
+fi
+#else
+# cobbler registration is disabled in /etc/cobbler/settings
+#end if
+#else
+# skipping for system-based installation
+#end if
+# End cobbler registration
diff --git a/deploy/adapters/cobbler/snippets/download_config_files b/deploy/adapters/cobbler/snippets/download_config_files
index 4bd56027..04443113 100644
--- a/deploy/adapters/cobbler/snippets/download_config_files
+++ b/deploy/adapters/cobbler/snippets/download_config_files
@@ -1,18 +1,18 @@
-# Start download cobbler managed config files (if applicable)
-#for $tkey, $tpath in $template_files.items()
- #set $orig = $tpath
- #set $tpath = $tpath.replace("_","__").replace("/","_")
- #if $getVar("system_name","") != ""
- #set $ttype = "system"
- #set $tname = $system_name
- #else
- #set $ttype = "profile"
- #set $tname = $profile_name
- #end if
- #set $turl = "http://"+$http_server+"/cblr/svc/op/template/"+$ttype+"/"+$tname+"/path/"+$tpath
-#if $orig.startswith("/")
-mkdir -p `dirname $orig`
-wget "$turl" --output-document="$orig"
-#end if
-#end for
-# End download cobbler managed config files (if applicable)
+# Start download cobbler managed config files (if applicable)
+#for $tkey, $tpath in $template_files.items()
+ #set $orig = $tpath
+ #set $tpath = $tpath.replace("_","__").replace("/","_")
+ #if $getVar("system_name","") != ""
+ #set $ttype = "system"
+ #set $tname = $system_name
+ #else
+ #set $ttype = "profile"
+ #set $tname = $profile_name
+ #end if
+ #set $turl = "http://"+$http_server+"/cblr/svc/op/template/"+$ttype+"/"+$tname+"/path/"+$tpath
+#if $orig.startswith("/")
+mkdir -p `dirname $orig`
+wget "$turl" --output-document="$orig"
+#end if
+#end for
+# End download cobbler managed config files (if applicable)
diff --git a/deploy/adapters/cobbler/snippets/download_config_files_deb b/deploy/adapters/cobbler/snippets/download_config_files_deb
index efb3a01f..95297d30 100644
--- a/deploy/adapters/cobbler/snippets/download_config_files_deb
+++ b/deploy/adapters/cobbler/snippets/download_config_files_deb
@@ -1,22 +1,22 @@
-## Start download cobbler managed config files (if applicable)
-#import os
-#import stat
-#set $cmd = '\\'
-#for $tkey, $tpath in $template_files.items()
- #set $orig = $tpath
- #set $tpath = $tpath.replace("_","__").replace("/","_")
- #if $getVar("system_name","") != ""
- #set $ttype = "system"
- #set $tname = $system_name
- #else
- #set $ttype = "profile"
- #set $tname = $profile_name
- #end if
- #set $turl = "http://"+$http_server+"/cblr/svc/op/template/"+$ttype+"/"+$tname+"/path/"+$tpath
-#if $orig.startswith("/")
-#set $perms = oct(stat.S_IMODE(os.stat($tkey).st_mode))[-3:]
-#set $cmd = $cmd + "\n" + "mkdir -p " + "`dirname " + $orig + "`; wget -nv " + $turl + " --output-document=" + $orig + "; chmod " + $perms +" " + $orig +"; \\"
-#end if
-#end for
-#echo $cmd
-## End download cobbler managed config files (if applicable)
+## Start download cobbler managed config files (if applicable)
+#import os
+#import stat
+#set $cmd = '\\'
+#for $tkey, $tpath in $template_files.items()
+ #set $orig = $tpath
+ #set $tpath = $tpath.replace("_","__").replace("/","_")
+ #if $getVar("system_name","") != ""
+ #set $ttype = "system"
+ #set $tname = $system_name
+ #else
+ #set $ttype = "profile"
+ #set $tname = $profile_name
+ #end if
+ #set $turl = "http://"+$http_server+"/cblr/svc/op/template/"+$ttype+"/"+$tname+"/path/"+$tpath
+#if $orig.startswith("/")
+#set $perms = oct(stat.S_IMODE(os.stat($tkey).st_mode))[-3:]
+#set $cmd = $cmd + "\n" + "mkdir -p " + "`dirname " + $orig + "`; wget -nv " + $turl + " --output-document=" + $orig + "; chmod " + $perms +" " + $orig +"; \\"
+#end if
+#end for
+#echo $cmd
+## End download cobbler managed config files (if applicable)
diff --git a/deploy/adapters/cobbler/snippets/func_install_if_enabled b/deploy/adapters/cobbler/snippets/func_install_if_enabled
index 66c878a5..4bff348c 100644
--- a/deploy/adapters/cobbler/snippets/func_install_if_enabled
+++ b/deploy/adapters/cobbler/snippets/func_install_if_enabled
@@ -1,4 +1,4 @@
-#if $str($getVar('func_auto_setup','')) == "1"
-func
-#end if
-
+#if $str($getVar('func_auto_setup','')) == "1"
+func
+#end if
+
diff --git a/deploy/adapters/cobbler/snippets/func_register_if_enabled b/deploy/adapters/cobbler/snippets/func_register_if_enabled
index 0e5580b3..4258fa33 100644
--- a/deploy/adapters/cobbler/snippets/func_register_if_enabled
+++ b/deploy/adapters/cobbler/snippets/func_register_if_enabled
@@ -1,26 +1,26 @@
-
-#if $str($getVar('func_auto_setup','')) == "1"
-# Start func registration section
-
-/sbin/chkconfig --level 345 funcd on
-
-cat <<EOFM > /etc/func/minion.conf
-[main]
-log_level = INFO
-acl_dir = /etc/func/minion-acl.d
-
-listen_addr =
-listen_port = 51234
-EOFM
-
-cat <<EOCM > /etc/certmaster/minion.conf
-[main]
-certmaster = $func_master
-certmaster_port = 51235
-log_level = DEBUG
-cert_dir = /etc/pki/certmaster
-EOCM
-
-# End func registration section
-#end if
-
+
+#if $str($getVar('func_auto_setup','')) == "1"
+# Start func registration section
+
+/sbin/chkconfig --level 345 funcd on
+
+cat <<EOFM > /etc/func/minion.conf
+[main]
+log_level = INFO
+acl_dir = /etc/func/minion-acl.d
+
+listen_addr =
+listen_port = 51234
+EOFM
+
+cat <<EOCM > /etc/certmaster/minion.conf
+[main]
+certmaster = $func_master
+certmaster_port = 51235
+log_level = DEBUG
+cert_dir = /etc/pki/certmaster
+EOCM
+
+# End func registration section
+#end if
+
diff --git a/deploy/adapters/cobbler/snippets/hosts.xml b/deploy/adapters/cobbler/snippets/hosts.xml
index 21a24dfc..7fd4ab6c 100644
--- a/deploy/adapters/cobbler/snippets/hosts.xml
+++ b/deploy/adapters/cobbler/snippets/hosts.xml
@@ -1,25 +1,25 @@
-<host>
- <hosts config:type="list">
- <hosts_entry>
- <host_address>127.0.0.1</host_address>
- <names config:type="list">
- <name>localhost</name>
- </names>
- </hosts_entry>
- #if $getVar("system_name","") != ""
- #set $ikeys = $interfaces.keys()
- #for $iface in $ikeys
- #set $idata = $interfaces[$iface]
- #if $idata["interface_type"].lower() in ["","na","bridge","bond"]
- <hosts_entry>
- <host_address>$idata["ip_address"]</host_address>
- <names config:type="list">
- #set $my_interface_hostname_short = $idata["dns_name"].split('.',1)[:1][0]
- <name>$idata["dns_name"].lower() $my_interface_hostname_short.lower()</name>
- </names>
- </hosts_entry>
- #end if
- #end for
- #end if
- </hosts>
- </host>
+<host>
+ <hosts config:type="list">
+ <hosts_entry>
+ <host_address>127.0.0.1</host_address>
+ <names config:type="list">
+ <name>localhost</name>
+ </names>
+ </hosts_entry>
+ #if $getVar("system_name","") != ""
+ #set $ikeys = $interfaces.keys()
+ #for $iface in $ikeys
+ #set $idata = $interfaces[$iface]
+ #if $idata["interface_type"].lower() in ["","na","bridge","bond"]
+ <hosts_entry>
+ <host_address>$idata["ip_address"]</host_address>
+ <names config:type="list">
+ #set $my_interface_hostname_short = $idata["dns_name"].split('.',1)[:1][0]
+ <name>$idata["dns_name"].lower() $my_interface_hostname_short.lower()</name>
+ </names>
+ </hosts_entry>
+ #end if
+ #end for
+ #end if
+ </hosts>
+</host>
diff --git a/deploy/adapters/cobbler/snippets/kdump.xml b/deploy/adapters/cobbler/snippets/kdump.xml
index 3d6ca9a4..0cffe976 100644
--- a/deploy/adapters/cobbler/snippets/kdump.xml
+++ b/deploy/adapters/cobbler/snippets/kdump.xml
@@ -1,35 +1,35 @@
-<kdump>
- <!-- memory reservation -->
- <!-- reserve 64 MB with 256MB to 2GB Memory and 128MB with more then 2GB Memory -->
- <add_crash_kernel config:type="boolean">true</add_crash_kernel>
- <crash_kernel>256M-2G:64M,2G-:128M</crash_kernel>
-
- <general>
- <!-- dump target settings -->
- <KDUMP_SAVEDIR>file:///var/crash</KDUMP_SAVEDIR>
- <KDUMP_COPY_KERNEL>true</KDUMP_COPY_KERNEL>
- <KDUMP_FREE_DISK_SIZE>64</KDUMP_FREE_DISK_SIZE>
- <KDUMP_KEEP_OLD_DUMPS>4</KDUMP_KEEP_OLD_DUMPS>
-
- <!-- filtering and compression -->
- <KDUMP_DUMPFORMAT>compressed</KDUMP_DUMPFORMAT>
- <KDUMP_DUMPLEVEL>31</KDUMP_DUMPLEVEL>
-
- <!-- notification -->
- <KDUMP_NOTIFICATION_TO></KDUMP_NOTIFICATION_TO>
- <KDUMP_NOTIFICATION_CC></KDUMP_NOTIFICATION_CC>
- <KDUMP_SMTP_SERVER></KDUMP_SMTP_SERVER>
- <KDUMP_SMTP_USER></KDUMP_SMTP_USER>
- <KDUMP_SMTP_PASSWORD></KDUMP_SMTP_PASSWORD>
-
- <!-- kdump kernel -->
- <KDUMP_KERNELVER></KDUMP_KERNELVER>
- <KDUMP_COMMANDLINE></KDUMP_COMMANDLINE>
- <KDUMP_COMMANDLINE_APPEND></KDUMP_COMMANDLINE_APPEND>
-
- <!-- expert settings -->
- <KDUMP_IMMEDIATE_REBOOT>yes</KDUMP_IMMEDIATE_REBOOT>
- <KDUMP_VERBOSE>3</KDUMP_VERBOSE>
- <KEXEC_OPTIONS></KEXEC_OPTIONS>
- </general>
- </kdump>
+<kdump>
+ <!-- memory reservation -->
+ <!-- reserve 64 MB with 256MB to 2GB Memory and 128MB with more then 2GB Memory -->
+ <add_crash_kernel config:type="boolean">true</add_crash_kernel>
+ <crash_kernel>256M-2G:64M,2G-:128M</crash_kernel>
+
+ <general>
+ <!-- dump target settings -->
+ <KDUMP_SAVEDIR>file:///var/crash</KDUMP_SAVEDIR>
+ <KDUMP_COPY_KERNEL>true</KDUMP_COPY_KERNEL>
+ <KDUMP_FREE_DISK_SIZE>64</KDUMP_FREE_DISK_SIZE>
+ <KDUMP_KEEP_OLD_DUMPS>4</KDUMP_KEEP_OLD_DUMPS>
+
+ <!-- filtering and compression -->
+ <KDUMP_DUMPFORMAT>compressed</KDUMP_DUMPFORMAT>
+ <KDUMP_DUMPLEVEL>31</KDUMP_DUMPLEVEL>
+
+ <!-- notification -->
+ <KDUMP_NOTIFICATION_TO></KDUMP_NOTIFICATION_TO>
+ <KDUMP_NOTIFICATION_CC></KDUMP_NOTIFICATION_CC>
+ <KDUMP_SMTP_SERVER></KDUMP_SMTP_SERVER>
+ <KDUMP_SMTP_USER></KDUMP_SMTP_USER>
+ <KDUMP_SMTP_PASSWORD></KDUMP_SMTP_PASSWORD>
+
+ <!-- kdump kernel -->
+ <KDUMP_KERNELVER></KDUMP_KERNELVER>
+ <KDUMP_COMMANDLINE></KDUMP_COMMANDLINE>
+ <KDUMP_COMMANDLINE_APPEND></KDUMP_COMMANDLINE_APPEND>
+
+ <!-- expert settings -->
+ <KDUMP_IMMEDIATE_REBOOT>yes</KDUMP_IMMEDIATE_REBOOT>
+ <KDUMP_VERBOSE>3</KDUMP_VERBOSE>
+ <KEXEC_OPTIONS></KEXEC_OPTIONS>
+ </general>
+</kdump>
diff --git a/deploy/adapters/cobbler/snippets/keep_cfengine_keys b/deploy/adapters/cobbler/snippets/keep_cfengine_keys
index 61c8eb51..06854adc 100644
--- a/deploy/adapters/cobbler/snippets/keep_cfengine_keys
+++ b/deploy/adapters/cobbler/snippets/keep_cfengine_keys
@@ -1,95 +1,95 @@
-#raw
-# Nifty trick to restore cfengine keys without using a nochroot %post
-
-echo "Saving cfengine keys..." > /dev/ttyS0
-
-SEARCHDIR=/var/cfengine/ppkeys
-TEMPDIR=cfengine
-PATTERN=localhost
-
-keys_found=no
-# /var could be a separate partition
-SHORTDIR=${SEARCHDIR#/var}
-if [ $SHORTDIR = $SEARCHDIR ]; then
- SHORTDIR=''
-fi
-insmod /lib/jbd.o
-insmod /lib/ext3.o
-
-mkdir -p /tmp/$TEMPDIR
-
-function findkeys
-{
- for disk in $DISKS; do
- name=$(basename $disk)
- tmpdir=$(mktemp -d $name.XXXXXX)
- mkdir -p /tmp/$tmpdir
- mount $disk /tmp/$tmpdir
- if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
- rm -rf /tmp/$tmpdir
- continue
- fi
- # Copy current host keys out to be reused
- if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- fi
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- done
-}
-
-DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
-# In the awk line above we want to make list of partitions, but not devices/controllers
-# cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
-# No need to scan loopback niether.
-# Try to find the keys on ordinary partitions
-
-findkeys
-
-# Try software RAID
-if [ "$keys_found" = "no" ]; then
- if mdadm -As; then
- DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
- findkeys
- fi
-fi
-
-
-# Try LVM if that didn't work
-if [ "$keys_found" = "no" ]; then
- lvm lvmdiskscan
- vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
- for vg in $vgs; do
- # Activate any VG we found
- lvm vgchange -ay $vg
- done
-
- DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
- findkeys
-
- # And clean up..
- for vg in $vgs; do
- lvm vgchange -an $vg
- done
-fi
-
-# Loop until the corresponding rpm is installed
-if [ "$keys_found" = "yes" ]; then
- while : ; do
- sleep 10
- if [ -d /mnt/sysimage$SEARCHDIR ] ; then
- cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
- logger "keys copied to newly installed system"
- break
- fi
- done &
-fi
-#end raw
+#raw
+# Nifty trick to restore cfengine keys without using a nochroot %post
+
+echo "Saving cfengine keys..." > /dev/ttyS0
+
+SEARCHDIR=/var/cfengine/ppkeys
+TEMPDIR=cfengine
+PATTERN=localhost
+
+keys_found=no
+# /var could be a separate partition
+SHORTDIR=${SEARCHDIR#/var}
+if [ $SHORTDIR = $SEARCHDIR ]; then
+ SHORTDIR=''
+fi
+insmod /lib/jbd.o
+insmod /lib/ext3.o
+
+mkdir -p /tmp/$TEMPDIR
+
+function findkeys
+{
+ for disk in $DISKS; do
+ name=$(basename $disk)
+ tmpdir=$(mktemp -d $name.XXXXXX)
+ mkdir -p /tmp/$tmpdir
+ mount $disk /tmp/$tmpdir
+ if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
+ rm -rf /tmp/$tmpdir
+ continue
+ fi
+ # Copy current host keys out to be reused
+ if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ fi
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ done
+}
+
+DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
+# In the awk line above we want to make list of partitions, but not devices/controllers
+# cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
+# No need to scan loopback niether.
+# Try to find the keys on ordinary partitions
+
+findkeys
+
+# Try software RAID
+if [ "$keys_found" = "no" ]; then
+ if mdadm -As; then
+ DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
+ findkeys
+ fi
+fi
+
+
+# Try LVM if that didn't work
+if [ "$keys_found" = "no" ]; then
+ lvm lvmdiskscan
+ vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
+ for vg in $vgs; do
+ # Activate any VG we found
+ lvm vgchange -ay $vg
+ done
+
+ DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
+ findkeys
+
+ # And clean up..
+ for vg in $vgs; do
+ lvm vgchange -an $vg
+ done
+fi
+
+# Loop until the corresponding rpm is installed
+if [ "$keys_found" = "yes" ]; then
+ while : ; do
+ sleep 10
+ if [ -d /mnt/sysimage$SEARCHDIR ] ; then
+ cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
+ logger "keys copied to newly installed system"
+ break
+ fi
+ done &
+fi
+#end raw
diff --git a/deploy/adapters/cobbler/snippets/keep_files b/deploy/adapters/cobbler/snippets/keep_files
index 65214377..d0e5e073 100644
--- a/deploy/adapters/cobbler/snippets/keep_files
+++ b/deploy/adapters/cobbler/snippets/keep_files
@@ -1,154 +1,154 @@
-## This snippet preserves files during re-build.
-## It supersedes other similar snippets - keep_*_keys.
-## Put it in %pre section of the kickstart template file
-## It uses preserve_files field which should contain a list of items to preserve
-## This field for now could contain any of the following:
-## 'ssh', 'cfengine', 'rhn' in any order
-## 'rhn' part of this snippet should NOT be used with systems subscribed
-## to Red Hat Satellite Server or Spacewalk as these
-## have a concept of "reactivation keys" to keep the systems
-## appearing to be the same. Also do not use if changing
-## base channels, i.e. RHEL4 -> RHEL5 upgrades.
-##
-
-#if $getVar('$preserve_files','') != ''
- #set $preserve_files = $getVar('$preserve_files','')
- preserve_files = $preserve_files
-
-#raw
-# Nifty trick to restore keys without using a nochroot %post
-
-echo "Saving keys..." > /dev/ttyS0
-
-insmod /lib/jbd.o
-insmod /lib/ext3.o
-
-function findkeys
-{
- for disk in $DISKS; do
- name=$(basename $disk)
- tmpdir=$(mktemp -d $name.XXXXXX)
- mkdir -p /tmp/$tmpdir
- mount $disk /tmp/$tmpdir
- if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
- rm -rf /tmp/$tmpdir
- continue
- fi
- # Copy current host keys out to be reused
- if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- fi
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- done
-}
-
-function search_for_keys
-{
-
- SEARCHDIR=$1
- TEMPDIR=$2
- PATTERN=$3
-
- keys_found=no
- # /var could be a separate partition
- SHORTDIR=${SEARCHDIR#/var}
- if [ $SHORTDIR = $SEARCHDIR ]; then
- SHORTDIR=''
- fi
-
- mkdir -p /tmp/$TEMPDIR
-
- DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
- # In the awk line above we want to make list of partitions, but not devices/controllers
- # cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
- # No need to scan loopback niether.
- # Try to find the keys on ordinary partitions
-
- findkeys
-
- # Try software RAID
- if [ "$keys_found" = "no" ]; then
- if mdadm -As; then
- DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
- findkeys
- fi
- fi
-
-
- # Try LVM if that didn't work
- if [ "$keys_found" = "no" ]; then
- lvm lvmdiskscan
- vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
- for vg in $vgs; do
- # Activate any VG we found
- lvm vgchange -ay $vg
- done
-
- DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
- findkeys
-
- # And clean up..
- for vg in $vgs; do
- lvm vgchange -an $vg
- done
- fi
-}
-
-function restore_keys
-{
- SEARCHDIR=$1
- TEMPDIR=$2
- PATTERN=$3
- # Loop until the corresponding rpm is installed if the keys are saved
- if [ "$keys_found" = "yes" ] && [ -f /tmp/$TEMPDIR/${PATTERN}* ]; then
- while : ; do
- sleep 10
- if [ -d /mnt/sysimage$SEARCHDIR ] ; then
- cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
- logger "$TEMPDIR keys copied to newly installed system"
- break
- fi
- done &
- fi
-}
-
-for key in $preserve_files
-do
- if [ $key = 'ssh' ]; then
- search_for_keys '/etc/ssh' 'ssh' 'ssh_host_'
- elif [ $key = 'cfengine' ]; then
- search_for_keys '/var/cfengine/ppkeys' 'cfengine' 'localhost'
- elif [ $key = 'rhn' ]; then
- search_for_keys '/etc/sysconfig/rhn', 'rhn', '*'
- else
- echo "No keys to save!" > /dev/ttyS0
- fi
-done
-
-# now restore keys if found
-
-for key in $preserve_files
-do
- if [ $key = 'ssh' ]; then
- restore_keys '/etc/ssh' 'ssh' 'ssh_host_'
- elif [ $key = 'cfengine' ]; then
- restore_keys '/var/cfengine/ppkeys' 'cfengine' 'localhost'
- elif [ $key = 'rhn' ]; then
- restore_keys '/etc/sysconfig/rhn', 'rhn', '*'
- else
- echo "Nothing to restore!" > /dev/ttyS0
- fi
-done
-
-
-#end raw
-#end if
+## This snippet preserves files during re-build.
+## It supersedes other similar snippets - keep_*_keys.
+## Put it in %pre section of the kickstart template file
+## It uses preserve_files field which should contain a list of items to preserve
+## This field for now could contain any of the following:
+## 'ssh', 'cfengine', 'rhn' in any order
+## 'rhn' part of this snippet should NOT be used with systems subscribed
+## to Red Hat Satellite Server or Spacewalk as these
+## have a concept of "reactivation keys" to keep the systems
+## appearing to be the same. Also do not use if changing
+## base channels, i.e. RHEL4 -> RHEL5 upgrades.
+##
+
+#if $getVar('$preserve_files','') != ''
+ #set $preserve_files = $getVar('$preserve_files','')
+ preserve_files = $preserve_files
+
+#raw
+# Nifty trick to restore keys without using a nochroot %post
+
+echo "Saving keys..." > /dev/ttyS0
+
+insmod /lib/jbd.o
+insmod /lib/ext3.o
+
+function findkeys
+{
+ for disk in $DISKS; do
+ name=$(basename $disk)
+ tmpdir=$(mktemp -d $name.XXXXXX)
+ mkdir -p /tmp/$tmpdir
+ mount $disk /tmp/$tmpdir
+ if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
+ rm -rf /tmp/$tmpdir
+ continue
+ fi
+ # Copy current host keys out to be reused
+ if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ fi
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ done
+}
+
+function search_for_keys
+{
+
+ SEARCHDIR=$1
+ TEMPDIR=$2
+ PATTERN=$3
+
+ keys_found=no
+ # /var could be a separate partition
+ SHORTDIR=${SEARCHDIR#/var}
+ if [ $SHORTDIR = $SEARCHDIR ]; then
+ SHORTDIR=''
+ fi
+
+ mkdir -p /tmp/$TEMPDIR
+
+ DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
+ # In the awk line above we want to make list of partitions, but not devices/controllers
+ # cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
+ # No need to scan loopback niether.
+ # Try to find the keys on ordinary partitions
+
+ findkeys
+
+ # Try software RAID
+ if [ "$keys_found" = "no" ]; then
+ if mdadm -As; then
+ DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
+ findkeys
+ fi
+ fi
+
+
+ # Try LVM if that didn't work
+ if [ "$keys_found" = "no" ]; then
+ lvm lvmdiskscan
+ vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
+ for vg in $vgs; do
+ # Activate any VG we found
+ lvm vgchange -ay $vg
+ done
+
+ DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
+ findkeys
+
+ # And clean up..
+ for vg in $vgs; do
+ lvm vgchange -an $vg
+ done
+ fi
+}
+
+function restore_keys
+{
+ SEARCHDIR=$1
+ TEMPDIR=$2
+ PATTERN=$3
+ # Loop until the corresponding rpm is installed if the keys are saved
+ if [ "$keys_found" = "yes" ] && [ -f /tmp/$TEMPDIR/${PATTERN}* ]; then
+ while : ; do
+ sleep 10
+ if [ -d /mnt/sysimage$SEARCHDIR ] ; then
+ cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
+ logger "$TEMPDIR keys copied to newly installed system"
+ break
+ fi
+ done &
+ fi
+}
+
+for key in $preserve_files
+do
+ if [ $key = 'ssh' ]; then
+ search_for_keys '/etc/ssh' 'ssh' 'ssh_host_'
+ elif [ $key = 'cfengine' ]; then
+ search_for_keys '/var/cfengine/ppkeys' 'cfengine' 'localhost'
+ elif [ $key = 'rhn' ]; then
+ search_for_keys '/etc/sysconfig/rhn', 'rhn', '*'
+ else
+ echo "No keys to save!" > /dev/ttyS0
+ fi
+done
+
+# now restore keys if found
+
+for key in $preserve_files
+do
+ if [ $key = 'ssh' ]; then
+ restore_keys '/etc/ssh' 'ssh' 'ssh_host_'
+ elif [ $key = 'cfengine' ]; then
+ restore_keys '/var/cfengine/ppkeys' 'cfengine' 'localhost'
+ elif [ $key = 'rhn' ]; then
+ restore_keys '/etc/sysconfig/rhn', 'rhn', '*'
+ else
+ echo "Nothing to restore!" > /dev/ttyS0
+ fi
+done
+
+
+#end raw
+#end if
diff --git a/deploy/adapters/cobbler/snippets/keep_rhn_keys b/deploy/adapters/cobbler/snippets/keep_rhn_keys
index d8d9faf6..46f7c993 100644
--- a/deploy/adapters/cobbler/snippets/keep_rhn_keys
+++ b/deploy/adapters/cobbler/snippets/keep_rhn_keys
@@ -1,88 +1,88 @@
-#raw
-
-## this snippet should NOT be used with systems subscribed
-## to Red Hat Satellite Server or Spacewalk as these
-## have a concept of "reactivation keys" to keep the systems
-## appearing to be the same. Also do not use if changing
-## base channels, i.e. RHEL4 -> RHEL5 upgrades.
-
-echo "Saving RHN keys..." > /dev/ttyS0
-
-rhn_keys_found=no
-
-insmod /lib/jbd.o
-insmod /lib/ext3.o
-
-mkdir -p /tmp/rhn
-
-drives=$(list-harddrives | awk '{print $1}')
-for disk in $drives; do
- DISKS="$DISKS $(fdisk -l /dev/$disk | awk '/^\/dev/{print $1}')"
-done
-
-# Try to find the keys on ordinary partitions
-for disk in $DISKS; do
- name=$(basename $disk)
- mkdir -p /tmp/$name
- mount $disk /tmp/$name
- [ $? -eq 0 ] || continue # Skip to the next partition if the mount fails
-
- # Copy current RHN host keys out to be reused
- if [ -d /tmp/${name}/etc/sysconfig/rhn ]; then
- cp -a /tmp/${name}/etc/sysconfig/rhn/install-num /tmp/rhn
- cp -a /tmp/${name}/etc/sysconfig/rhn/systemid /tmp/rhn
- cp -a /tmp/${name}/etc/sysconfig/rhn/up2date /tmp/rhn
- rhn_keys_found="yes"
- umount /tmp/$name
- break
- fi
- umount /tmp/$name
- rm -r /tmp/$name
-done
-
-# Try LVM if that didn't work
-if [ "$rhn_keys_found" = "no" ]; then
- lvm lvmdiskscan
- vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
- for vg in $vgs; do
- # Activate any VG we found
- lvm vgchange -ay $vg
- done
-
- lvs=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
- for lv in $lvs; do
- tmpdir=$(mktemp -d findkeys.XXXXXX)
- mkdir -p /tmp/${tmpdir}
- mount $lv /tmp/${tmpdir} || continue # Skip to next volume if this fails
-
- # Let's see if the keys are in there
- if [ -d /tmp/${tmpdir}/etc/sysconfig/rhn ]; then
- cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/install-num* /tmp/rhn/
- cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/systemid* /tmp/rhn/
- cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/up2date /tmp/rhn/
- rhn_keys_found="yes"
- umount /tmp/${tmpdir}
- break # We're done!
- fi
- umount /tmp/${tmpdir}
- rm -r /tmp/${tmpdir}
- done
-
- # And clean up..
- for vg in $vgs; do
- lvm vgchange -an $vg
- done
-fi
-
-# Loop until the RHN rpm is installed
-if [ "$rhn_keys_found" = "yes" ]; then
- while : ; do
- sleep 10
- if [ -d /mnt/sysimage/etc/sysconfig/rhn ] ; then
- cp -af /tmp/rhn/* /mnt/sysimage/etc/sysconfig/rhn/
- logger "RHN KEY copied to newly installed system"
- break
- fi
- done &
-fi
-#end raw
+#raw
+
+## this snippet should NOT be used with systems subscribed
+## to Red Hat Satellite Server or Spacewalk as these
+## have a concept of "reactivation keys" to keep the systems
+## appearing to be the same. Also do not use if changing
+## base channels, i.e. RHEL4 -> RHEL5 upgrades.
+
+echo "Saving RHN keys..." > /dev/ttyS0
+
+rhn_keys_found=no
+
+insmod /lib/jbd.o
+insmod /lib/ext3.o
+
+mkdir -p /tmp/rhn
+
+drives=$(list-harddrives | awk '{print $1}')
+for disk in $drives; do
+ DISKS="$DISKS $(fdisk -l /dev/$disk | awk '/^\/dev/{print $1}')"
+done
+
+# Try to find the keys on ordinary partitions
+for disk in $DISKS; do
+ name=$(basename $disk)
+ mkdir -p /tmp/$name
+ mount $disk /tmp/$name
+ [ $? -eq 0 ] || continue # Skip to the next partition if the mount fails
+
+ # Copy current RHN host keys out to be reused
+ if [ -d /tmp/${name}/etc/sysconfig/rhn ]; then
+ cp -a /tmp/${name}/etc/sysconfig/rhn/install-num /tmp/rhn
+ cp -a /tmp/${name}/etc/sysconfig/rhn/systemid /tmp/rhn
+ cp -a /tmp/${name}/etc/sysconfig/rhn/up2date /tmp/rhn
+ rhn_keys_found="yes"
+ umount /tmp/$name
+ break
+ fi
+ umount /tmp/$name
+ rm -r /tmp/$name
+done
+
+# Try LVM if that didn't work
+if [ "$rhn_keys_found" = "no" ]; then
+ lvm lvmdiskscan
+ vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
+ for vg in $vgs; do
+ # Activate any VG we found
+ lvm vgchange -ay $vg
+ done
+
+ lvs=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
+ for lv in $lvs; do
+ tmpdir=$(mktemp -d findkeys.XXXXXX)
+ mkdir -p /tmp/${tmpdir}
+ mount $lv /tmp/${tmpdir} || continue # Skip to next volume if this fails
+
+ # Let's see if the keys are in there
+ if [ -d /tmp/${tmpdir}/etc/sysconfig/rhn ]; then
+ cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/install-num* /tmp/rhn/
+ cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/systemid* /tmp/rhn/
+ cp -a /tmp/${tmpdir}/etc/sysconfig/rhn/up2date /tmp/rhn/
+ rhn_keys_found="yes"
+ umount /tmp/${tmpdir}
+ break # We're done!
+ fi
+ umount /tmp/${tmpdir}
+ rm -r /tmp/${tmpdir}
+ done
+
+ # And clean up..
+ for vg in $vgs; do
+ lvm vgchange -an $vg
+ done
+fi
+
+# Loop until the RHN rpm is installed
+if [ "$rhn_keys_found" = "yes" ]; then
+ while : ; do
+ sleep 10
+ if [ -d /mnt/sysimage/etc/sysconfig/rhn ] ; then
+ cp -af /tmp/rhn/* /mnt/sysimage/etc/sysconfig/rhn/
+ logger "RHN KEY copied to newly installed system"
+ break
+ fi
+ done &
+fi
+#end raw
diff --git a/deploy/adapters/cobbler/snippets/keep_ssh_host_keys b/deploy/adapters/cobbler/snippets/keep_ssh_host_keys
index eb0a43eb..75970477 100644
--- a/deploy/adapters/cobbler/snippets/keep_ssh_host_keys
+++ b/deploy/adapters/cobbler/snippets/keep_ssh_host_keys
@@ -1,114 +1,114 @@
-#raw
-# Nifty trick to restore keys without using a nochroot %post
-
-echo "Saving keys..." > /dev/ttyS0
-
-SEARCHDIR=/etc/ssh
-TEMPDIR=ssh
-PATTERN=ssh_host_
-
-keys_found=no
-# /var could be a separate partition
-SHORTDIR=${SEARCHDIR#/var}
-if [ $SHORTDIR = $SEARCHDIR ]; then
- SHORTDIR=''
-fi
-insmod /lib/jbd.o
-insmod /lib/ext3.o
-
-mkdir -p /tmp/$TEMPDIR
-
-
-function findkeys
-{
- for disk in $DISKS; do
- name=$(basename $disk)
- tmpdir=$(mktemp -d $name.XXXXXX)
- mkdir -p /tmp/$tmpdir
- mount $disk /tmp/$tmpdir
- if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
- rm -rf /tmp/$tmpdir
- continue
- fi
- # Copy current host keys out to be reused
- if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
- keys_found="yes"
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- break
- fi
- umount /tmp/$tmpdir
- rm -r /tmp/$tmpdir
- done
-}
-
-DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
-# In the awk line above we want to make list of partitions, but not devices/controllers
-# cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
-# No need to scan loopback niether.
-# Try to find the keys on ordinary partitions
-
-findkeys
-
-# Try software RAID
-if [ "$keys_found" = "no" ]; then
- if mdadm -As; then
- DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
- findkeys
- # unmount and deactivate all md
- for md in $DISKS ; do
- umount $md
- mdadm -S $md
- done
- fi
-fi
-
-
-# Try LVM if that didn't work
-if [ "$keys_found" = "no" ]; then
- lvm lvmdiskscan
- vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
- for vg in $vgs; do
- # Activate any VG we found
- lvm vgchange -ay $vg
- done
-
- DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
- findkeys
-
- # And clean up..
- for vg in $vgs; do
- lvm vgchange -an $vg
- done
-fi
-
-# Loop until the corresponding rpm is installed
-if [ "$keys_found" = "yes" ]; then
- if [ "$PATTERN" = "ssh_host_" ]; then
- while : ; do
- sleep 10
- if [ -f /etc/ssh/ssh_host_key ] ; then
- cp -af /tmp/$TEMPDIR/${PATTERN}* $SEARCHDIR
- break
- fi
- done 1>/dev/null 2>/dev/null &
- fi
- while : ; do
- sleep 10
- if [ -d /mnt/sysimage$SEARCHDIR ] ; then
- cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
- if [ -e "/sbin/restorecon"]; then
- /sbin/restorecon -r /etc/ssh
- fi
- logger "keys copied to newly installed system"
- break
- fi
- done 1>/dev/null 2>/dev/null &
-fi
-#end raw
-
+#raw
+# Nifty trick to restore keys without using a nochroot %post
+
+echo "Saving keys..." > /dev/ttyS0
+
+SEARCHDIR=/etc/ssh
+TEMPDIR=ssh
+PATTERN=ssh_host_
+
+keys_found=no
+# /var could be a separate partition
+SHORTDIR=${SEARCHDIR#/var}
+if [ $SHORTDIR = $SEARCHDIR ]; then
+ SHORTDIR=''
+fi
+insmod /lib/jbd.o
+insmod /lib/ext3.o
+
+mkdir -p /tmp/$TEMPDIR
+
+
+function findkeys
+{
+ for disk in $DISKS; do
+ name=$(basename $disk)
+ tmpdir=$(mktemp -d $name.XXXXXX)
+ mkdir -p /tmp/$tmpdir
+ mount $disk /tmp/$tmpdir
+ if [ $? -ne 0 ]; then # Skip to the next partition if the mount fails
+ rm -rf /tmp/$tmpdir
+ continue
+ fi
+ # Copy current host keys out to be reused
+ if [ -d /tmp/$tmpdir$SEARCHDIR ] && cp -a /tmp/$tmpdir$SEARCHDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ elif [ -n "$SHORTDIR" ] && [ -d /tmp/$tmpdir$SHORTDIR ] && cp -a /tmp/$tmpdir$SHORTDIR/${PATTERN}* /tmp/$TEMPDIR; then
+ keys_found="yes"
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ break
+ fi
+ umount /tmp/$tmpdir
+ rm -r /tmp/$tmpdir
+ done
+}
+
+DISKS=$(awk '{if ($NF ~ "^[a-zA-Z].*[0-9]$" && $NF !~ "c[0-9]+d[0-9]+$" && $NF !~ "^loop.*") print "/dev/"$NF}' /proc/partitions)
+# In the awk line above we want to make list of partitions, but not devices/controllers
+# cciss raid controllers have partitions like /dev/cciss/cNdMpL, where N,M,L - some digits, we want to make sure 'pL' is there
+# No need to scan loopback niether.
+# Try to find the keys on ordinary partitions
+
+findkeys
+
+# Try software RAID
+if [ "$keys_found" = "no" ]; then
+ if mdadm -As; then
+ DISKS=$(awk '/md/{print "/dev/"$1}' /proc/mdstat)
+ findkeys
+ # unmount and deactivate all md
+ for md in $DISKS ; do
+ umount $md
+ mdadm -S $md
+ done
+ fi
+fi
+
+
+# Try LVM if that didn't work
+if [ "$keys_found" = "no" ]; then
+ lvm lvmdiskscan
+ vgs=$(lvm vgs | tail -n +2 | awk '{ print $1 }')
+ for vg in $vgs; do
+ # Activate any VG we found
+ lvm vgchange -ay $vg
+ done
+
+ DISKS=$(lvm lvs | tail -n +2 | awk '{ print "/dev/" $2 "/" $1 }')
+ findkeys
+
+ # And clean up..
+ for vg in $vgs; do
+ lvm vgchange -an $vg
+ done
+fi
+
+# Loop until the corresponding rpm is installed
+if [ "$keys_found" = "yes" ]; then
+ if [ "$PATTERN" = "ssh_host_" ]; then
+ while : ; do
+ sleep 10
+ if [ -f /etc/ssh/ssh_host_key ] ; then
+ cp -af /tmp/$TEMPDIR/${PATTERN}* $SEARCHDIR
+ break
+ fi
+ done 1>/dev/null 2>/dev/null &
+ fi
+ while : ; do
+ sleep 10
+ if [ -d /mnt/sysimage$SEARCHDIR ] ; then
+ cp -af /tmp/$TEMPDIR/${PATTERN}* /mnt/sysimage$SEARCHDIR
+ if [ -e "/sbin/restorecon"]; then
+ /sbin/restorecon -r /etc/ssh
+ fi
+ logger "keys copied to newly installed system"
+ break
+ fi
+ done 1>/dev/null 2>/dev/null &
+fi
+#end raw
+
diff --git a/deploy/adapters/cobbler/snippets/koan_environment b/deploy/adapters/cobbler/snippets/koan_environment
index 8a888b6e..3ad417f6 100644
--- a/deploy/adapters/cobbler/snippets/koan_environment
+++ b/deploy/adapters/cobbler/snippets/koan_environment
@@ -1,4 +1,4 @@
-# Start koan environment setup
-echo "export COBBLER_SERVER=$server" > /etc/profile.d/cobbler.sh
-echo "setenv COBBLER_SERVER $server" > /etc/profile.d/cobbler.csh
-# End koan environment setup
+# Start koan environment setup
+echo "export COBBLER_SERVER=$server" > /etc/profile.d/cobbler.sh
+echo "setenv COBBLER_SERVER $server" > /etc/profile.d/cobbler.csh
+# End koan environment setup
diff --git a/deploy/adapters/cobbler/snippets/limits_conf.xml b/deploy/adapters/cobbler/snippets/limits_conf.xml
index b9281fcf..80caaf43 100644
--- a/deploy/adapters/cobbler/snippets/limits_conf.xml
+++ b/deploy/adapters/cobbler/snippets/limits_conf.xml
@@ -1,61 +1,61 @@
-<file>
- <file_path>/etc/security/limits.conf</file_path>
- <file_contents>
-<![CDATA[
-#raw
-# /etc/security/limits.conf
-#
-# Each line describes a limit for a user in the form:
-#
-#<domain> <type> <item> <value>
-#
-#Where:
-#<domain> can be:
-# - an user name
-# - a group name, with @group syntax
-# - the wildcard *, for default entry
-# - the wildcard %, can be also used with %group syntax,
-# for maxlogin limit
-#
-#<type> can have the two values:
-# - "soft" for enforcing the soft limits
-# - "hard" for enforcing hard limits
-#
-#<item> can be one of the following:
-# - core - limits the core file size (KB)
-# - data - max data size (KB)
-# - fsize - maximum filesize (KB)
-# - memlock - max locked-in-memory address space (KB)
-# - nofile - max number of open files
-# - rss - max resident set size (KB)
-# - stack - max stack size (KB)
-# - cpu - max CPU time (MIN)
-# - nproc - max number of processes
-# - as - address space limit (KB)
-# - maxlogins - max number of logins for this user
-# - maxsyslogins - max number of logins on the system
-# - priority - the priority to run user process with
-# - locks - max number of file locks the user can hold
-# - sigpending - max number of pending signals
-# - msgqueue - max memory used by POSIX message queues (bytes)
-# - nice - max nice priority allowed to raise to values: [-20, 19]
-# - rtprio - max realtime priority
-#
-#<domain> <type> <item> <value>
-#
-
-#* soft core 0
-#* hard rss 10000
-#@student hard nproc 20
-#@faculty soft nproc 20
-#@faculty hard nproc 50
-#ftp hard nproc 0
-#@student - maxlogins 4
-* - nofile 100000
-# End of file
-#end raw
-]]>
- </file_contents>
- <file_owner>root.root</file_owner>
- <file_permissions>644</file_permissions>
-</file>
+<file>
+ <file_path>/etc/security/limits.conf</file_path>
+ <file_contents>
+<![CDATA[
+#raw
+# /etc/security/limits.conf
+#
+# Each line describes a limit for a user in the form:
+#
+#<domain> <type> <item> <value>
+#
+#Where:
+#<domain> can be:
+# - an user name
+# - a group name, with @group syntax
+# - the wildcard *, for default entry
+# - the wildcard %, can be also used with %group syntax,
+# for maxlogin limit
+#
+#<type> can have the two values:
+# - "soft" for enforcing the soft limits
+# - "hard" for enforcing hard limits
+#
+#<item> can be one of the following:
+# - core - limits the core file size (KB)
+# - data - max data size (KB)
+# - fsize - maximum filesize (KB)
+# - memlock - max locked-in-memory address space (KB)
+# - nofile - max number of open files
+# - rss - max resident set size (KB)
+# - stack - max stack size (KB)
+# - cpu - max CPU time (MIN)
+# - nproc - max number of processes
+# - as - address space limit (KB)
+# - maxlogins - max number of logins for this user
+# - maxsyslogins - max number of logins on the system
+# - priority - the priority to run user process with
+# - locks - max number of file locks the user can hold
+# - sigpending - max number of pending signals
+# - msgqueue - max memory used by POSIX message queues (bytes)
+# - nice - max nice priority allowed to raise to values: [-20, 19]
+# - rtprio - max realtime priority
+#
+#<domain> <type> <item> <value>
+#
+
+#* soft core 0
+#* hard rss 10000
+#@student hard nproc 20
+#@faculty soft nproc 20
+#@faculty hard nproc 50
+#ftp hard nproc 0
+#@student - maxlogins 4
+* - nofile 100000
+# End of file
+#end raw
+]]>
+ </file_contents>
+ <file_owner>root.root</file_owner>
+ <file_permissions>644</file_permissions>
+</file>
diff --git a/deploy/adapters/cobbler/snippets/log_ks_post b/deploy/adapters/cobbler/snippets/log_ks_post
index 7bed3008..d1df0265 100644
--- a/deploy/adapters/cobbler/snippets/log_ks_post
+++ b/deploy/adapters/cobbler/snippets/log_ks_post
@@ -1,2 +1,2 @@
-set -x -v
-exec 1>/root/ks-post.log 2>&1
+set -x -v
+exec 1>/root/ks-post.log 2>&1
diff --git a/deploy/adapters/cobbler/snippets/log_ks_pre b/deploy/adapters/cobbler/snippets/log_ks_pre
index 98eeb23b..fe71c592 100644
--- a/deploy/adapters/cobbler/snippets/log_ks_pre
+++ b/deploy/adapters/cobbler/snippets/log_ks_pre
@@ -1,12 +1,12 @@
-set -x -v
-exec 1>/tmp/ks-pre.log 2>&1
-
-# Once root's homedir is there, copy over the log.
-while : ; do
- sleep 10
- if [ -d /mnt/sysimage/root ]; then
- cp /tmp/ks-pre.log /mnt/sysimage/root/
- logger "Copied %pre section log to system"
- break
- fi
-done &
+set -x -v
+exec 1>/tmp/ks-pre.log 2>&1
+
+# Once root's homedir is there, copy over the log.
+while : ; do
+ sleep 10
+ if [ -d /mnt/sysimage/root ]; then
+ cp /tmp/ks-pre.log /mnt/sysimage/root/
+ logger "Copied %pre section log to system"
+ break
+ fi
+done &
diff --git a/deploy/adapters/cobbler/snippets/networking.xml b/deploy/adapters/cobbler/snippets/networking.xml
index a468ab47..c9428a48 100644
--- a/deploy/adapters/cobbler/snippets/networking.xml
+++ b/deploy/adapters/cobbler/snippets/networking.xml
@@ -1,131 +1,131 @@
-#set $hostname = $getVar("hostname","")
-#if $hostname == ""
-#set $hostname = $getVar("system_name","cobbler")
-#end if
-#if $getVar("dns_name_eth0","") != ""
- #set $my_hostname = $hostname.split('.',1)[:1][0]
- #set $my_domainname = $dns_name_eth0.split('.',1)[1:][0]
-#else
- #set $my_hostname = $hostname
- #set $my_domainname = "site"
-#end if
-
- <networking>
- <keep_install_network config:type="boolean">false</keep_install_network>
- <dhcp_options>
- <dhclient_client_id></dhclient_client_id>
- <dhclient_hostname_option></dhclient_hostname_option>
- </dhcp_options>
- <dns>
- <dhcp_hostname config:type="boolean">false</dhcp_hostname>
- <dhcp_resolv config:type="boolean">false</dhcp_resolv>
- <write_hostname config:type="boolean">false</write_hostname>
- <resolv_conf_policy></resolv_conf_policy>
- <hostname>$my_hostname</hostname>
- <domain>$my_domainname</domain>
- #if $getVar("name_servers_search","") != ""
- <searchlist config:type="list">
- #for $sd in $name_servers_search
- <search>$sd</search>
- #end for
- </searchlist>
- #end if
- <nameservers config:type="list">
- #for $ns in $name_servers
- <nameserver>$ns</nameserver>
- #end for
- </nameservers>
- </dns>
- <interfaces config:type="list">
- #if $getVar("system_name","") != ""
- #set $ikeys = $interfaces.keys()
- #for $iface in $ikeys
- #set $idata = $interfaces[$iface]
- #set $mac = $idata["mac_address"]
- #set $ip = $idata["ip_address"]
- #set $netmask = $idata["netmask"]
- #set $iface_type = $idata["interface_type"]
- #set $bonding_opts = $idata["bonding_opts"]
- #if $iface_type.lower() == "bond"
- <interface>
- <bonding_master>yes</bonding_master>
- <bonding_module_opts>$bonding_opts.lower()</bonding_module_opts>
- #set $loop_ikeys = $interfaces.keys()
- #set $loop_counter = 0
- #for $loop_iface in $loop_ikeys
- #set $loop_idata = $interfaces[$loop_iface]
- #set $loop_interface_type = $loop_idata["interface_type"]
- #if $loop_interface_type.lower == "bond_slave"
- #if $loop_idata["interface_master"] != ""
- #if $loop_idata["interface_master"].lower() == $iface.lower()
- <bonding_slave$loop_counter>$loop_iface</bonding_slave$loop_counter>
- #set $loop_counter += 1
- #end if
- #end if
- #end if
- #end for
- <bootproto>static</bootproto>
- <device>$iface</device>
- <ipaddr>$ip</ipaddr>
- <netmask>$netmask</netmask>
- <startmode>auto</startmode>
- <usercontrol>no</usercontrol>
- </interface>
- #end if
- #if $iface_type.lower() in ["bond_slave","bridge_slave"]
- <interface>
- <bootproto>none</bootproto>
- <device>$iface</device>
- <startmode>off</startmode>
- <usercontrol>no</usercontrol>
- </interface>
- #end if
- #if $iface_type.lower() in ["","na"]
- <interface>
- <bootproto>static</bootproto>
- <device>$iface</device>
- <lladdr>$mac.lower()</lladdr>
- <ipaddr>$ip</ipaddr>
- <netmask>$netmask</netmask>
- <startmode>auto</startmode>
- <usercontrol>no</usercontrol>
- </interface>
- #end if
- #end for
- #end if
- </interfaces>
- <managed config:type="boolean">false</managed>
- <net-udev config:type="list">
- #if $getVar("system_name","") != ""
- #set $ikeys = $interfaces.keys()
- #for $iface in $ikeys
- #set $idata = $interfaces[$iface]
- #set $mac = $idata["mac_address"]
- #set $interface_type = $idata["interface_type"]
- #if $mac.lower() != ""
- #if $interface_type.lower() not in ["bond","bridge"]
- <rule>
- <name>$iface</name>
- <rule>ATTR{address}</rule>
- <value>$mac.lower()</value>
- </rule>
- #end if
- #end if
- #end for
- #end if
- </net-udev>
- <routing>
- <ip_forward config:type="boolean">false</ip_forward>
- #if $getVar("system_name","") != ""
- ## TODO: add in static routes here
- <routes config:type="list">
- <route>
- <destination>default</destination>
- <netmask>-</netmask>
- <device>-</device>
- <gateway>$gateway</gateway>
- </route>
- </routes>
- #end if
- </routing>
- </networking>
+#set $hostname = $getVar("hostname","")
+#if $hostname == ""
+#set $hostname = $getVar("system_name","cobbler")
+#end if
+#if $getVar("dns_name_eth0","") != ""
+ #set $my_hostname = $hostname.split('.',1)[:1][0]
+ #set $my_domainname = $dns_name_eth0.split('.',1)[1:][0]
+#else
+ #set $my_hostname = $hostname
+ #set $my_domainname = "site"
+#end if
+
+ <networking>
+ <keep_install_network config:type="boolean">false</keep_install_network>
+ <dhcp_options>
+ <dhclient_client_id></dhclient_client_id>
+ <dhclient_hostname_option></dhclient_hostname_option>
+ </dhcp_options>
+ <dns>
+ <dhcp_hostname config:type="boolean">false</dhcp_hostname>
+ <dhcp_resolv config:type="boolean">false</dhcp_resolv>
+ <write_hostname config:type="boolean">false</write_hostname>
+ <resolv_conf_policy></resolv_conf_policy>
+ <hostname>$my_hostname</hostname>
+ <domain>$my_domainname</domain>
+ #if $getVar("name_servers_search","") != ""
+ <searchlist config:type="list">
+ #for $sd in $name_servers_search
+ <search>$sd</search>
+ #end for
+ </searchlist>
+ #end if
+ <nameservers config:type="list">
+ #for $ns in $name_servers
+ <nameserver>$ns</nameserver>
+ #end for
+ </nameservers>
+ </dns>
+ <interfaces config:type="list">
+ #if $getVar("system_name","") != ""
+ #set $ikeys = $interfaces.keys()
+ #for $iface in $ikeys
+ #set $idata = $interfaces[$iface]
+ #set $mac = $idata["mac_address"]
+ #set $ip = $idata["ip_address"]
+ #set $netmask = $idata["netmask"]
+ #set $iface_type = $idata["interface_type"]
+ #set $bonding_opts = $idata["bonding_opts"]
+ #if $iface_type.lower() == "bond"
+ <interface>
+ <bonding_master>yes</bonding_master>
+ <bonding_module_opts>$bonding_opts.lower()</bonding_module_opts>
+ #set $loop_ikeys = $interfaces.keys()
+ #set $loop_counter = 0
+ #for $loop_iface in $loop_ikeys
+ #set $loop_idata = $interfaces[$loop_iface]
+ #set $loop_interface_type = $loop_idata["interface_type"]
+ #if $loop_interface_type.lower == "bond_slave"
+ #if $loop_idata["interface_master"] != ""
+ #if $loop_idata["interface_master"].lower() == $iface.lower()
+ <bonding_slave$loop_counter>$loop_iface</bonding_slave$loop_counter>
+ #set $loop_counter += 1
+ #end if
+ #end if
+ #end if
+ #end for
+ <bootproto>static</bootproto>
+ <device>$iface</device>
+ <ipaddr>$ip</ipaddr>
+ <netmask>$netmask</netmask>
+ <startmode>auto</startmode>
+ <usercontrol>no</usercontrol>
+ </interface>
+ #end if
+ #if $iface_type.lower() in ["bond_slave","bridge_slave"]
+ <interface>
+ <bootproto>none</bootproto>
+ <device>$iface</device>
+ <startmode>off</startmode>
+ <usercontrol>no</usercontrol>
+ </interface>
+ #end if
+ #if $iface_type.lower() in ["","na"]
+ <interface>
+ <bootproto>static</bootproto>
+ <device>$iface</device>
+ <lladdr>$mac.lower()</lladdr>
+ <ipaddr>$ip</ipaddr>
+ <netmask>$netmask</netmask>
+ <startmode>auto</startmode>
+ <usercontrol>no</usercontrol>
+ </interface>
+ #end if
+ #end for
+ #end if
+ </interfaces>
+ <managed config:type="boolean">false</managed>
+ <net-udev config:type="list">
+ #if $getVar("system_name","") != ""
+ #set $ikeys = $interfaces.keys()
+ #for $iface in $ikeys
+ #set $idata = $interfaces[$iface]
+ #set $mac = $idata["mac_address"]
+ #set $interface_type = $idata["interface_type"]
+ #if $mac.lower() != ""
+ #if $interface_type.lower() not in ["bond","bridge"]
+ <rule>
+ <name>$iface</name>
+ <rule>ATTR{address}</rule>
+ <value>$mac.lower()</value>
+ </rule>
+ #end if
+ #end if
+ #end for
+ #end if
+ </net-udev>
+ <routing>
+ <ip_forward config:type="boolean">false</ip_forward>
+ #if $getVar("system_name","") != ""
+ ## TODO: add in static routes here
+ <routes config:type="list">
+ <route>
+ <destination>default</destination>
+ <netmask>-</netmask>
+ <device>-</device>
+ <gateway>$gateway</gateway>
+ </route>
+ </routes>
+ #end if
+ </routing>
+ </networking>
diff --git a/deploy/adapters/cobbler/snippets/ntp.xml b/deploy/adapters/cobbler/snippets/ntp.xml
index 20832b4b..0f1a10f5 100644
--- a/deploy/adapters/cobbler/snippets/ntp.xml
+++ b/deploy/adapters/cobbler/snippets/ntp.xml
@@ -1,16 +1,16 @@
-#if $getVar('ntp_server', '') == ""
- #set $ntp_server = '0.pool.ntp.org'
-#end if
- <ntp-client>
- <configure_dhcp config:type="boolean">false</configure_dhcp>
- <peers config:type="list">
- <peer>
- <address>$ntp_server</address>
- <initial_sync config:type="boolean">true</initial_sync>
- <options></options>
- <type>server</type>
- </peer>
- </peers>
- <start_at_boot config:type="boolean">true</start_at_boot>
- <start_in_chroot config:type="boolean">true</start_in_chroot>
- </ntp-client>
+#if $getVar('ntp_server', '') == ""
+ #set $ntp_server = '0.pool.ntp.org'
+#end if
+ <ntp-client>
+ <configure_dhcp config:type="boolean">false</configure_dhcp>
+ <peers config:type="list">
+ <peer>
+ <address>$ntp_server</address>
+ <initial_sync config:type="boolean">true</initial_sync>
+ <options></options>
+ <type>server</type>
+ </peer>
+ </peers>
+ <start_at_boot config:type="boolean">true</start_at_boot>
+ <start_in_chroot config:type="boolean">true</start_in_chroot>
+ </ntp-client>
diff --git a/deploy/adapters/cobbler/snippets/post_koan_add_reinstall_entry b/deploy/adapters/cobbler/snippets/post_koan_add_reinstall_entry
index f0c516d1..63a9c59f 100644
--- a/deploy/adapters/cobbler/snippets/post_koan_add_reinstall_entry
+++ b/deploy/adapters/cobbler/snippets/post_koan_add_reinstall_entry
@@ -1,6 +1,6 @@
-%post
-#if $getVar("system_name","") != ""
- koan --server=$server --replace-self --add-reinstall-entry
-#else
- koan --server=$server --replace-self --profile=$profile_name --add-reinstall-entry
-#end if
+%post
+#if $getVar("system_name","") != ""
+ koan --server=$server --replace-self --add-reinstall-entry
+#else
+ koan --server=$server --replace-self --profile=$profile_name --add-reinstall-entry
+#end if
diff --git a/deploy/adapters/cobbler/snippets/post_s390_reboot b/deploy/adapters/cobbler/snippets/post_s390_reboot
index be99664f..fa33f06c 100644
--- a/deploy/adapters/cobbler/snippets/post_s390_reboot
+++ b/deploy/adapters/cobbler/snippets/post_s390_reboot
@@ -1,67 +1,67 @@
-## RHEL zVM installs do not properly reboot into the installed system. This
-## issue has been resolved in RHEL-5 Update3. To get a consistent reboot
-## behavior for s390* installs on all distros, this snippet can be used. The
-## snippet will attempt to discover the IPL volume zipl is being installed
-## to and will attempt a reipl. Be sure to set this snippet as the *last*
-## snippet your kickstart template.
-
-#if $arch.startswith("s390"):
-%post --nochroot
-
-# Does the kickstart file request a reboot?
-grep -q "^reboot" /tmp/ks.cfg /ks.cfg 2>/dev/null
-if [ \$? -ne 0 ]; then
- exit 0
-fi
-
-# find out the location of /boot and use it to re-ipl
-boot_dev=""
-for mountpt in /mnt/sysimage/boot /mnt/sysimage;
-do
- set -- \$(grep " \$mountpt " /proc/mounts)
- if [ -b "\$1" ]; then
- boot_dev=\$1
- break
- fi
-done
-
-# lookup dasd disk
-if [[ \$boot_dev == *dasd* ]]; then
- # remove the '/dev/' (aka basename)
- boot_dev=\${boot_dev\#\#/[^/]*/}
- # strip partition number from dasd device
- boot_dev=\${boot_dev%%[0-9]}
- type="ccw"
- id=`basename \$(readlink /sys/block/\$boot_dev/device)`
-
- # HACK - In RHEL4 and RHEL3 ... we do it the hard way
- grep -q "^[34]\$" /.buildstamp 2>/dev/null
- if [ \$? -eq 0 ]; then
- cat <<EOF> /mnt/sysimage/tmp/zeboot.sh
-\#!/bin/bash
-/sbin/modprobe -r vmcp
-rm -f "/dev/vmcp"
-sleep 2
-[ -b "/dev/vmcp" ] || /bin/mknod /dev/vmcp c 10 61
-/sbin/modprobe -a vmcp
-sync
-# Force a boot (e.g. IPL 0100)
-/sbin/vmcp ipl \${id\#\#*.}
-EOF
- /bin/chmod +x /mnt/sysimage/tmp/zeboot.sh
- /bin/chroot /mnt/sysimage /tmp/zeboot.sh
- # In RHEL5 ... lets cleanly shutdown (Update 3 and newer)
- else
- echo \$type > /sys/firmware/reipl/reipl_type
- echo \$id > /sys/firmware/reipl/\$type/device
-
- # Force a reboot
- pid=\$(cat /var/run/init.pid)
- [ -z "\$pid" ] && pid=\$(pidof init)
- kill -12 \$pid
- pid=\$(cat /var/run/loader.run)
- [ -z "\$pid" ] && pid=\$(pidof loader)
- kill \$pid
- fi
-fi
-#end if
+## RHEL zVM installs do not properly reboot into the installed system. This
+## issue has been resolved in RHEL-5 Update3. To get a consistent reboot
+## behavior for s390* installs on all distros, this snippet can be used. The
+## snippet will attempt to discover the IPL volume zipl is being installed
+## to and will attempt a reipl. Be sure to set this snippet as the *last*
+## snippet your kickstart template.
+
+#if $arch.startswith("s390"):
+%post --nochroot
+
+# Does the kickstart file request a reboot?
+grep -q "^reboot" /tmp/ks.cfg /ks.cfg 2>/dev/null
+if [ \$? -ne 0 ]; then
+ exit 0
+fi
+
+# find out the location of /boot and use it to re-ipl
+boot_dev=""
+for mountpt in /mnt/sysimage/boot /mnt/sysimage;
+do
+ set -- \$(grep " \$mountpt " /proc/mounts)
+ if [ -b "\$1" ]; then
+ boot_dev=\$1
+ break
+ fi
+done
+
+# lookup dasd disk
+if [[ \$boot_dev == *dasd* ]]; then
+ # remove the '/dev/' (aka basename)
+ boot_dev=\${boot_dev\#\#/[^/]*/}
+ # strip partition number from dasd device
+ boot_dev=\${boot_dev%%[0-9]}
+ type="ccw"
+ id=`basename \$(readlink /sys/block/\$boot_dev/device)`
+
+ # HACK - In RHEL4 and RHEL3 ... we do it the hard way
+ grep -q "^[34]\$" /.buildstamp 2>/dev/null
+ if [ \$? -eq 0 ]; then
+ cat <<EOF> /mnt/sysimage/tmp/zeboot.sh
+\#!/bin/bash
+/sbin/modprobe -r vmcp
+rm -f "/dev/vmcp"
+sleep 2
+[ -b "/dev/vmcp" ] || /bin/mknod /dev/vmcp c 10 61
+/sbin/modprobe -a vmcp
+sync
+# Force a boot (e.g. IPL 0100)
+/sbin/vmcp ipl \${id\#\#*.}
+EOF
+ /bin/chmod +x /mnt/sysimage/tmp/zeboot.sh
+ /bin/chroot /mnt/sysimage /tmp/zeboot.sh
+ # In RHEL5 ... lets cleanly shutdown (Update 3 and newer)
+ else
+ echo \$type > /sys/firmware/reipl/reipl_type
+ echo \$id > /sys/firmware/reipl/\$type/device
+
+ # Force a reboot
+ pid=\$(cat /var/run/init.pid)
+ [ -z "\$pid" ] && pid=\$(pidof init)
+ kill -12 \$pid
+ pid=\$(cat /var/run/loader.run)
+ [ -z "\$pid" ] && pid=\$(pidof loader)
+ kill \$pid
+ fi
+fi
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_ansible b/deploy/adapters/cobbler/snippets/preseed_ansible
index d3f5a12f..8b137891 100644
--- a/deploy/adapters/cobbler/snippets/preseed_ansible
+++ b/deploy/adapters/cobbler/snippets/preseed_ansible
@@ -1 +1 @@
-
+
diff --git a/deploy/adapters/cobbler/snippets/preseed_apt_repo_config b/deploy/adapters/cobbler/snippets/preseed_apt_repo_config
index 185b6118..e28dd808 100644
--- a/deploy/adapters/cobbler/snippets/preseed_apt_repo_config
+++ b/deploy/adapters/cobbler/snippets/preseed_apt_repo_config
@@ -1,27 +1,27 @@
-# Uncomment this if you don't want to use a network mirror
-d-i apt-setup/use_mirror boolean false
-d-i apt-setup/services-select multiselect
-d-i apt-setup/security_host string $http_server
-d-i apt-setup/security_path string $install_source_directory
-# Additional repositories, local[0-9] available
-#set $cur=0
-#set $repo_data = $getVar("repo_data",[])
-#for $repo in $repo_data
- #for $dist in $repo.apt_dists
- #set $comps = " ".join($repo.apt_components)
-d-i apt-setup/local${cur}/repository string \
- #if $repo.mirror_locally
-deb http://$http_server/cobbler/repo_mirror/${repo.name} $dist $comps
- #else
-deb ${repo.mirror} $dist $comps
- #end if
- #if $repo.comment != ""
-d-i apt-setup/local${cur}/comment string ${repo.comment}
- #end if
- #if $repo.breed == "src"
-# Enable deb-src lines
-d-i apt-setup/local${cur}/source boolean false
- #end if
- #set $cur=$cur+1
- #end for
-#end for
+# Uncomment this if you don't want to use a network mirror
+d-i apt-setup/use_mirror boolean false
+d-i apt-setup/services-select multiselect
+d-i apt-setup/security_host string $http_server
+d-i apt-setup/security_path string $install_source_directory
+# Additional repositories, local[0-9] available
+#set $cur=0
+#set $repo_data = $getVar("repo_data",[])
+#for $repo in $repo_data
+ #for $dist in $repo.apt_dists
+ #set $comps = " ".join($repo.apt_components)
+d-i apt-setup/local${cur}/repository string \
+ #if $repo.mirror_locally
+deb http://$http_server/cobbler/repo_mirror/${repo.name} $dist $comps
+ #else
+deb ${repo.mirror} $dist $comps
+ #end if
+ #if $repo.comment != ""
+d-i apt-setup/local${cur}/comment string ${repo.comment}
+ #end if
+ #if $repo.breed == "src"
+# Enable deb-src lines
+d-i apt-setup/local${cur}/source boolean false
+ #end if
+ #set $cur=$cur+1
+ #end for
+#end for
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef b/deploy/adapters/cobbler/snippets/preseed_chef
index 52d93fa0..c6ab4855 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef
+++ b/deploy/adapters/cobbler/snippets/preseed_chef
@@ -1,13 +1,13 @@
-mkdir -p /etc/chef
-mkdir -p /var/log/chef
-
-## Generate validation.pem
-$SNIPPET('preseed_chef-validator.pem')
-## Generate admin.pem
-$SNIPPET('preseed_chef-admin.pem')
-## Generate client.rb
-$SNIPPET('preseed_client.rb')
-$SNIPPET('preseed_knife.rb')
-$SNIPPET('preseed_gem_local_repo')
-$SNIPPET('preseed_chef_run.sh')
-$SNIPPET('preseed_chef_init')
+mkdir -p /etc/chef
+mkdir -p /var/log/chef
+
+## Generate validation.pem
+$SNIPPET('preseed_chef-validator.pem')
+## Generate admin.pem
+$SNIPPET('preseed_chef-admin.pem')
+## Generate client.rb
+$SNIPPET('preseed_client.rb')
+$SNIPPET('preseed_knife.rb')
+$SNIPPET('preseed_gem_local_repo')
+$SNIPPET('preseed_chef_run.sh')
+$SNIPPET('preseed_chef_init')
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef-admin.pem b/deploy/adapters/cobbler/snippets/preseed_chef-admin.pem
index 4d098bd8..36aad5d1 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef-admin.pem
+++ b/deploy/adapters/cobbler/snippets/preseed_chef-admin.pem
@@ -1,8 +1,8 @@
-#if $getVar('chef_admin_file', '') == ""
- #set chef_admin_file = '/etc/chef-server/admin.pem'
-#end if
-#set f = $open($chef_admin_file)
-cat << EOL > /etc/chef/admin.pem
-#echo $f.read()
-EOL
-#silent $f.close()
+#if $getVar('chef_admin_file', '') == ""
+ #set chef_admin_file = '/etc/chef-server/admin.pem'
+#end if
+#set f = $open($chef_admin_file)
+cat << EOL > /etc/chef/admin.pem
+#echo $f.read()
+EOL
+#silent $f.close()
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef-validator.pem b/deploy/adapters/cobbler/snippets/preseed_chef-validator.pem
index e181c977..515a2195 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef-validator.pem
+++ b/deploy/adapters/cobbler/snippets/preseed_chef-validator.pem
@@ -1,8 +1,8 @@
-#if $getVar('chef_validation_file', '') == ""
- #set chef_validation_file = '/etc/chef-server/chef-validator.pem'
-#end if
-#set f = $open($chef_validation_file)
-cat << EOL > /etc/chef/validation.pem
-#echo $f.read()
-EOL
-#silent $f.close()
+#if $getVar('chef_validation_file', '') == ""
+ #set chef_validation_file = '/etc/chef-server/chef-validator.pem'
+#end if
+#set f = $open($chef_validation_file)
+cat << EOL > /etc/chef/validation.pem
+#echo $f.read()
+EOL
+#silent $f.close()
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef_init b/deploy/adapters/cobbler/snippets/preseed_chef_init
index ec9938a2..57fe7672 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef_init
+++ b/deploy/adapters/cobbler/snippets/preseed_chef_init
@@ -1,31 +1,31 @@
-## A self-destruct service to boot chef client and register cron job
-#if $getVar('ntp_server', '') == ""
- #set $ntp_server = '0.ubuntu.pool.ntp.org'
-#end if
-cat << EOF > /etc/init.d/chef
-#raw
-#!/bin/bash
-# chkconfig: 2345 99 20
-# description: Description of the script
-# processname: chef-agent
-#end raw
-echo "old date is: `date`" 2>&1 > /tmp/ntp.log
-service ntpd stop 2>&1 >> /tmp/ntp.log
-ntpdate $ntp_server 2>&1 >> /tmp/ntp.log
-service ntpd start 2>&1 >> /tmp/ntp.log
-echo "new date is: `date`" 2>&1 >> /tmp/ntp.log
-apt-get -y update 2>&1 >> /tmp/apt_update
-
-crontab -l > /tmp/mycron
-echo "*/30 * * * * /etc/chef/chef_client_run.sh" >> /tmp/mycron
-crontab /tmp/mycron
-rm /tmp/mycron
-
-/etc/chef/chef_client_run.sh &
-
-update-rc.d -f chef remove
-mv /etc/init.d/chef /tmp/chef
-EOF
-
-chmod +x /etc/init.d/chef
-update-rc.d chef defaults 99 20
+## A self-destruct service to boot chef client and register cron job
+#if $getVar('ntp_server', '') == ""
+ #set $ntp_server = '0.ubuntu.pool.ntp.org'
+#end if
+cat << EOF > /etc/init.d/chef
+#raw
+#!/bin/bash
+# chkconfig: 2345 99 20
+# description: Description of the script
+# processname: chef-agent
+#end raw
+echo "old date is: `date`" 2>&1 > /tmp/ntp.log
+service ntpd stop 2>&1 >> /tmp/ntp.log
+ntpdate $ntp_server 2>&1 >> /tmp/ntp.log
+service ntpd start 2>&1 >> /tmp/ntp.log
+echo "new date is: `date`" 2>&1 >> /tmp/ntp.log
+apt-get -y update 2>&1 >> /tmp/apt_update
+
+crontab -l > /tmp/mycron
+echo "*/30 * * * * /etc/chef/chef_client_run.sh" >> /tmp/mycron
+crontab /tmp/mycron
+rm /tmp/mycron
+
+/etc/chef/chef_client_run.sh &
+
+update-rc.d -f chef remove
+mv /etc/init.d/chef /tmp/chef
+EOF
+
+chmod +x /etc/init.d/chef
+update-rc.d chef defaults 99 20
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef_rsyslog.conf b/deploy/adapters/cobbler/snippets/preseed_chef_rsyslog.conf
index 011191b2..f26613bd 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef_rsyslog.conf
+++ b/deploy/adapters/cobbler/snippets/preseed_chef_rsyslog.conf
@@ -1,10 +1,10 @@
-echo "\\$ModLoad imfile" > /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileName /var/log/chef-client.log" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileReadMode 0" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileTag" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileStateFile firstboot_log" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileSeverity notice" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFileFacility local3" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputRunFileMonitor" >> /target/etc/rsyslog.d/chef.conf; \
-echo "\\$InputFilePollInterval 1" >> /target/etc/rsyslog.d/chef.conf; \
-echo "local3.info @$server:514" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$ModLoad imfile" > /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileName /var/log/chef-client.log" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileReadMode 0" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileTag" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileStateFile firstboot_log" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileSeverity notice" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFileFacility local3" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputRunFileMonitor" >> /target/etc/rsyslog.d/chef.conf; \
+echo "\\$InputFilePollInterval 1" >> /target/etc/rsyslog.d/chef.conf; \
+echo "local3.info @$server:514" >> /target/etc/rsyslog.d/chef.conf; \
diff --git a/deploy/adapters/cobbler/snippets/preseed_chef_run.sh b/deploy/adapters/cobbler/snippets/preseed_chef_run.sh
index 8bda6210..ade6215f 100644
--- a/deploy/adapters/cobbler/snippets/preseed_chef_run.sh
+++ b/deploy/adapters/cobbler/snippets/preseed_chef_run.sh
@@ -1,105 +1,105 @@
-#set ip_address = ""
-#set ikeys = $interfaces.keys()
-#for $iname in $ikeys
- #set $idata = $interfaces[$iname]
- #set $static = $idata["static"]
- #set $management = $idata["management"]
- #set $ip = $idata["ip_address"]
- #if $management and $ip
- #set $ip_address = $ip
- #end if
-#end for
-
-#set $proxy_url = ""
-#set $local_repo_url = ""
-#if $getVar("local_repo","") != ""
- #set $local_repo_url = $local_repo
-#end if
-#if $getVar("proxy","") != ""
- #set $proxy_url = $proxy
-#end if
-
-#if $getVar('compass_server', '') != ""
- #set srv = $getVar('compass_server','')
-#else
- #set srv = $getVar('server','')
-#end if
-
-cat << EOF > /etc/chef/chef_client_run.sh
-#!/bin/bash
-touch /var/log/chef.log
-PIDFILE=/tmp/chef_client_run.pid
-if [ -f \\$PIDFILE ]; then
- pid=\\$(cat \\$PIDFILE)
- if [ -f /proc/\\$pid/exe ]; then
- echo "there are chef_client_run.sh running with pid \\$pid" >> /var/log/chef.log 2>&1
- exit 1
- fi
-fi
-echo \\$$ > \\$PIDFILE
-while true; do
- echo "run chef-client on \`date\`" >> /var/log/chef.log 2>&1
- clients=\\$(pgrep chef-client)
- if [[ "\\$?" == "0" ]]; then
- echo "there are chef-clients '\\$clients' running" >> /var/log/chef.log 2>&1
- break
- else
- echo "knife search nodes" >> /var/log/chef.log 2>&1
- USER=root HOME=/root knife node list |grep \\$HOSTNAME. >> /var/log/chef.log 2>&1
- nodes=\\$(USER=root HOME=/root knife node list |grep \\$HOSTNAME.)
- echo "found nodes \\$nodes" >> /var/log/chef.log 2>&1
- all_nodes_success=1
- for node in \\$nodes; do
- mkdir -p /var/log/chef/\\$node
- if [ ! -f /etc/chef/\\$node.json ]; then
- cat << EOL > /etc/chef/\\$node.json
-{
- "local_repo": "$local_repo_url",
- "proxy_url": "$proxy_url",
- "ip_address": "$ip_address"
-}
-EOL
- fi
- if [ ! -f "/etc/chef/\\$node.pem" ]; then
- cat << EOL > /etc/rsyslog.d/\\$node.conf
-\\\\$ModLoad imfile
-\\\\$InputFileName /var/log/chef/\\$node/chef-client.log
-\\\\$InputFileReadMode 0
-\\\\$InputFileTag \\$node
-\\\\$InputFileStateFile chef_\\${node}_log
-\\\\$InputFileSeverity notice
-\\\\$InputFileFacility local3
-\\\\$InputRunFileMonitor
-\\\\$InputFilePollInterval 1
-#if $getVar("compass_server","") != ""
-local3.info @$compass_server:514
-#else
-local3.info @@$server:514
-#end if
-EOL
- rm -rf /var/lib/rsyslog/chef_\\$node_log
- service rsyslog restart
- fi
- if [ -f "/etc/chef/\\$node.done" ]; then
- USER=root HOME=/root chef-client --node-name \\$node -j /etc/chef/\\$node.json --client_key /etc/chef/\\$node.pem >> /var/log/chef.log 2>&1
- else
- USER=root HOME=/root chef-client --node-name \\$node -j /etc/chef/\\$node.json --client_key /etc/chef/\\$node.pem -L /var/log/chef/\\$node/chef-client.log >> /var/log/chef.log 2>&1
- fi
- if [ "\\$?" != "0" ]; then
- echo "chef-client --node-name \\$node run failed" >> /var/log/chef.log 2>&1
- all_nodes_success=0
- else
- echo "chef-client --node-name \\$node run success" >> /var/log/chef.log 2>&1
- touch /etc/chef/\\$node.done
- wget -O /tmp/package_state.\\$node --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv/api/clusterhosts/\\${node}/state_internal"
- fi
- done
- if [ \\$all_nodes_success -eq 0 ]; then
- sleep 1m
- else
- break
- fi
- fi
-done
-EOF
-chmod +x /etc/chef/chef_client_run.sh
+#set ip_address = ""
+#set ikeys = $interfaces.keys()
+#for $iname in $ikeys
+ #set $idata = $interfaces[$iname]
+ #set $static = $idata["static"]
+ #set $management = $idata["management"]
+ #set $ip = $idata["ip_address"]
+ #if $management and $ip
+ #set $ip_address = $ip
+ #end if
+#end for
+
+#set $proxy_url = ""
+#set $local_repo_url = ""
+#if $getVar("local_repo","") != ""
+ #set $local_repo_url = $local_repo
+#end if
+#if $getVar("proxy","") != ""
+ #set $proxy_url = $proxy
+#end if
+
+#if $getVar('compass_server', '') != ""
+ #set srv = $getVar('compass_server','')
+#else
+ #set srv = $getVar('server','')
+#end if
+
+cat << EOF > /etc/chef/chef_client_run.sh
+#!/bin/bash
+touch /var/log/chef.log
+PIDFILE=/tmp/chef_client_run.pid
+if [ -f \\$PIDFILE ]; then
+ pid=\\$(cat \\$PIDFILE)
+ if [ -f /proc/\\$pid/exe ]; then
+ echo "there are chef_client_run.sh running with pid \\$pid" >> /var/log/chef.log 2>&1
+ exit 1
+ fi
+fi
+echo \\$$ > \\$PIDFILE
+while true; do
+ echo "run chef-client on \`date\`" >> /var/log/chef.log 2>&1
+ clients=\\$(pgrep chef-client)
+ if [[ "\\$?" == "0" ]]; then
+ echo "there are chef-clients '\\$clients' running" >> /var/log/chef.log 2>&1
+ break
+ else
+ echo "knife search nodes" >> /var/log/chef.log 2>&1
+ USER=root HOME=/root knife node list |grep \\$HOSTNAME. >> /var/log/chef.log 2>&1
+ nodes=\\$(USER=root HOME=/root knife node list |grep \\$HOSTNAME.)
+ echo "found nodes \\$nodes" >> /var/log/chef.log 2>&1
+ all_nodes_success=1
+ for node in \\$nodes; do
+ mkdir -p /var/log/chef/\\$node
+ if [ ! -f /etc/chef/\\$node.json ]; then
+ cat << EOL > /etc/chef/\\$node.json
+{
+ "local_repo": "$local_repo_url",
+ "proxy_url": "$proxy_url",
+ "ip_address": "$ip_address"
+}
+EOL
+ fi
+ if [ ! -f "/etc/chef/\\$node.pem" ]; then
+ cat << EOL > /etc/rsyslog.d/\\$node.conf
+\\\\$ModLoad imfile
+\\\\$InputFileName /var/log/chef/\\$node/chef-client.log
+\\\\$InputFileReadMode 0
+\\\\$InputFileTag \\$node
+\\\\$InputFileStateFile chef_\\${node}_log
+\\\\$InputFileSeverity notice
+\\\\$InputFileFacility local3
+\\\\$InputRunFileMonitor
+\\\\$InputFilePollInterval 1
+#if $getVar("compass_server","") != ""
+local3.info @$compass_server:514
+#else
+local3.info @@$server:514
+#end if
+EOL
+ rm -rf /var/lib/rsyslog/chef_\\$node_log
+ service rsyslog restart
+ fi
+ if [ -f "/etc/chef/\\$node.done" ]; then
+ USER=root HOME=/root chef-client --node-name \\$node -j /etc/chef/\\$node.json --client_key /etc/chef/\\$node.pem >> /var/log/chef.log 2>&1
+ else
+ USER=root HOME=/root chef-client --node-name \\$node -j /etc/chef/\\$node.json --client_key /etc/chef/\\$node.pem -L /var/log/chef/\\$node/chef-client.log >> /var/log/chef.log 2>&1
+ fi
+ if [ "\\$?" != "0" ]; then
+ echo "chef-client --node-name \\$node run failed" >> /var/log/chef.log 2>&1
+ all_nodes_success=0
+ else
+ echo "chef-client --node-name \\$node run success" >> /var/log/chef.log 2>&1
+ touch /etc/chef/\\$node.done
+ wget -O /tmp/package_state.\\$node --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv/api/clusterhosts/\\${node}/state_internal"
+ fi
+ done
+ if [ \\$all_nodes_success -eq 0 ]; then
+ sleep 1m
+ else
+ break
+ fi
+ fi
+done
+EOF
+chmod +x /etc/chef/chef_client_run.sh
diff --git a/deploy/adapters/cobbler/snippets/preseed_client.rb b/deploy/adapters/cobbler/snippets/preseed_client.rb
index 465d96e1..e6c60a4d 100644
--- a/deploy/adapters/cobbler/snippets/preseed_client.rb
+++ b/deploy/adapters/cobbler/snippets/preseed_client.rb
@@ -1,35 +1,35 @@
-cat << EOL > /etc/chef/client.rb
-log_level :info
-log_location '/dev/null'
-#if $getVar('chef_url', '') != ""
-chef_server_url '$chef_url'
-#elif $getVar("compass_server","") != ""
-chef_server_url 'https://$compass_server'
-#else
-chef_server_url 'https://$server'
-#end if
-validation_client_name 'chef-validator'
-json_attribs nil
-pid_file '/var/run/chef-client.pid'
-# Using default node name (fqdn)
-no_lazy_load true
-ssl_verify_mode :verify_none
-EOL
-
-mkdir -p /etc/chef/trusted_certs
-#set certs_path = $getVar("trusted_certs_path", "/var/opt/chef-server/nginx/ca")
-#if $certs_path != ""
- #import os
- #import os.path
- #set filenames = $os.listdir($certs_path)
- #for filename in $filenames
- #if $filename.endswith('.crt')
- #set filepath = $os.path.join($certs_path, $filename)
- #set f = $open($filepath)
-cat << EOF > /etc/chef/trusted_certs/$filename
- #echo $f.read()
-EOF
- #silent $f.close()
- #end if
- #end for
-#end if
+cat << EOL > /etc/chef/client.rb
+log_level :info
+log_location '/dev/null'
+#if $getVar('chef_url', '') != ""
+chef_server_url '$chef_url'
+#elif $getVar("compass_server","") != ""
+chef_server_url 'https://$compass_server'
+#else
+chef_server_url 'https://$server'
+#end if
+validation_client_name 'chef-validator'
+json_attribs nil
+pid_file '/var/run/chef-client.pid'
+# Using default node name (fqdn)
+no_lazy_load true
+ssl_verify_mode :verify_none
+EOL
+
+mkdir -p /etc/chef/trusted_certs
+#set certs_path = $getVar("trusted_certs_path", "/var/opt/chef-server/nginx/ca")
+#if $certs_path != ""
+ #import os
+ #import os.path
+ #set filenames = $os.listdir($certs_path)
+ #for filename in $filenames
+ #if $filename.endswith('.crt')
+ #set filepath = $os.path.join($certs_path, $filename)
+ #set f = $open($filepath)
+cat << EOF > /etc/chef/trusted_certs/$filename
+ #echo $f.read()
+EOF
+ #silent $f.close()
+ #end if
+ #end for
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_gem_local_repo b/deploy/adapters/cobbler/snippets/preseed_gem_local_repo
index 457bfd4f..ac779382 100644
--- a/deploy/adapters/cobbler/snippets/preseed_gem_local_repo
+++ b/deploy/adapters/cobbler/snippets/preseed_gem_local_repo
@@ -1,23 +1,23 @@
-cat << EOF > /root/.gemrc
-#if $getVar('proxy', '') != ""
-gem: --no-ri --no-rdoc --http-proxy=$proxy
-#else
-gem: --no-ri --no-rdoc
-#end if
-:backtrace: false
-:benchmark: false
-:bulk_threshold: 1000
-:sources:
-#if $getVar("local_repo","") != ""
-- $local_repo/gem_repo/
- #if $getVar("local_repo_only","1") == "0"
-- https://rubygems.org/
- #end if
-#else
-- https://rubygems.org/
-#end if
-:update_sources: true
-:verbose: true
-EOF
-
-cp -f /root/.gemrc /etc/gemrc
+cat << EOF > /root/.gemrc
+#if $getVar('proxy', '') != ""
+gem: --no-ri --no-rdoc --http-proxy=$proxy
+#else
+gem: --no-ri --no-rdoc
+#end if
+:backtrace: false
+:benchmark: false
+:bulk_threshold: 1000
+:sources:
+#if $getVar("local_repo","") != ""
+- $local_repo/gem_repo/
+ #if $getVar("local_repo_only","1") == "0"
+- https://rubygems.org/
+ #end if
+#else
+- https://rubygems.org/
+#end if
+:update_sources: true
+:verbose: true
+EOF
+
+cp -f /root/.gemrc /etc/gemrc
diff --git a/deploy/adapters/cobbler/snippets/preseed_hosts b/deploy/adapters/cobbler/snippets/preseed_hosts
index 67ecba80..7f8426d9 100644
--- a/deploy/adapters/cobbler/snippets/preseed_hosts
+++ b/deploy/adapters/cobbler/snippets/preseed_hosts
@@ -1,15 +1,15 @@
-cat << EOL > /etc/hosts
-127.0.0.1 $system_name localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1 $system_name localhost localhost.localdomain localhost6 localhost6.localdomain6
-#for $iname, $idata in $interfaces.items()
- #if $hostname and $idata["management"] and $idata["static"] and $idata.get("ip_address", "") != ""
-$idata["ip_address"] $hostname
- #end if
-#end for
-#import os
-#set $server_name = $os.uname[1]
-$server $server_name
-#if $getVar("chef_server_ip", "") != "" and $getVar("chef_server_dns", "") != ""
-$chef_server_ip $chef_server_dns
-#end if
-EOL
+cat << EOL > /etc/hosts
+127.0.0.1 $system_name localhost localhost.localdomain localhost4 localhost4.localdomain4
+::1 $system_name localhost localhost.localdomain localhost6 localhost6.localdomain6
+#for $iname, $idata in $interfaces.items()
+ #if $hostname and $idata["management"] and $idata["static"] and $idata.get("ip_address", "") != ""
+$idata["ip_address"] $hostname
+ #end if
+#end for
+#import os
+#set $server_name = $os.uname[1]
+$server $server_name
+#if $getVar("chef_server_ip", "") != "" and $getVar("chef_server_dns", "") != ""
+$chef_server_ip $chef_server_dns
+#end if
+EOL
diff --git a/deploy/adapters/cobbler/snippets/preseed_knife.rb b/deploy/adapters/cobbler/snippets/preseed_knife.rb
index 4e9efb21..32047bbc 100644
--- a/deploy/adapters/cobbler/snippets/preseed_knife.rb
+++ b/deploy/adapters/cobbler/snippets/preseed_knife.rb
@@ -1,32 +1,32 @@
-mkdir -p /root/.chef
-cat << EOL > /root/.chef/knife.rb
-log_level :info
-log_location '/dev/null'
-#if $getVar('chef_url', '') != ""
-chef_server_url '$chef_url'
-#end if
-node_name 'admin'
-client_key '/etc/chef/admin.pem'
-validation_client_name 'chef-validator'
-validation_key '/etc/chef/validation.pem'
-syntax_check_cache_path '/root/.chef/syntax_check_cache'
-ssl_verify_mode :verify_none
-EOL
-
-mkdir -p /root/.chef/trusted_certs
-#set certs_path = $getVar("trusted_certs_path", "/var/opt/chef-server/nginx/ca")
-#if $certs_path != ""
- #import os
- #import os.path
- #set filenames = $os.listdir($certs_path)
- #for filename in $filenames
- #if $filename.endswith('.crt')
- #set filepath = $os.path.join($certs_path, $filename)
- #set f = $open($filepath)
-cat << EOF > /root/.chef/trusted_certs/$filename
- #echo $f.read()
-EOF
- #silent $f.close()
- #end if
- #end for
-#end if
+mkdir -p /root/.chef
+cat << EOL > /root/.chef/knife.rb
+log_level :info
+log_location '/dev/null'
+#if $getVar('chef_url', '') != ""
+chef_server_url '$chef_url'
+#end if
+node_name 'admin'
+client_key '/etc/chef/admin.pem'
+validation_client_name 'chef-validator'
+validation_key '/etc/chef/validation.pem'
+syntax_check_cache_path '/root/.chef/syntax_check_cache'
+ssl_verify_mode :verify_none
+EOL
+
+mkdir -p /root/.chef/trusted_certs
+#set certs_path = $getVar("trusted_certs_path", "/var/opt/chef-server/nginx/ca")
+#if $certs_path != ""
+ #import os
+ #import os.path
+ #set filenames = $os.listdir($certs_path)
+ #for filename in $filenames
+ #if $filename.endswith('.crt')
+ #set filepath = $os.path.join($certs_path, $filename)
+ #set f = $open($filepath)
+cat << EOF > /root/.chef/trusted_certs/$filename
+ #echo $f.read()
+EOF
+ #silent $f.close()
+ #end if
+ #end for
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_limits.conf b/deploy/adapters/cobbler/snippets/preseed_limits.conf
index a6df3e0c..00cf8610 100644
--- a/deploy/adapters/cobbler/snippets/preseed_limits.conf
+++ b/deploy/adapters/cobbler/snippets/preseed_limits.conf
@@ -1,54 +1,54 @@
-cat << EOF > /etc/security/limits.conf
-#raw
-# /etc/security/limits.conf
-#
-# Each line describes a limit for a user in the form:
-#
-#<domain> <type> <item> <value>
-#
-#Where:
-#<domain> can be:
-# - an user name
-# - a group name, with @group syntax
-# - the wildcard *, for default entry
-# - the wildcard %, can be also used with %group syntax,
-# for maxlogin limit
-#
-#<type> can have the two values:
-# - "soft" for enforcing the soft limits
-# - "hard" for enforcing hard limits
-#
-#<item> can be one of the following:
-# - core - limits the core file size (KB)
-# - data - max data size (KB)
-# - fsize - maximum filesize (KB)
-# - memlock - max locked-in-memory address space (KB)
-# - nofile - max number of open files
-# - rss - max resident set size (KB)
-# - stack - max stack size (KB)
-# - cpu - max CPU time (MIN)
-# - nproc - max number of processes
-# - as - address space limit (KB)
-# - maxlogins - max number of logins for this user
-# - maxsyslogins - max number of logins on the system
-# - priority - the priority to run user process with
-# - locks - max number of file locks the user can hold
-# - sigpending - max number of pending signals
-# - msgqueue - max memory used by POSIX message queues (bytes)
-# - nice - max nice priority allowed to raise to values: [-20, 19]
-# - rtprio - max realtime priority
-#
-#<domain> <type> <item> <value>
-#
-
-#* soft core 0
-#* hard rss 10000
-#@student hard nproc 20
-#@faculty soft nproc 20
-#@faculty hard nproc 50
-#ftp hard nproc 0
-#@student - maxlogins 4
-* - nofile 100000
-# End of file
-#end raw
-EOF
+cat << EOF > /etc/security/limits.conf
+#raw
+# /etc/security/limits.conf
+#
+# Each line describes a limit for a user in the form:
+#
+#<domain> <type> <item> <value>
+#
+#Where:
+#<domain> can be:
+# - an user name
+# - a group name, with @group syntax
+# - the wildcard *, for default entry
+# - the wildcard %, can be also used with %group syntax,
+# for maxlogin limit
+#
+#<type> can have the two values:
+# - "soft" for enforcing the soft limits
+# - "hard" for enforcing hard limits
+#
+#<item> can be one of the following:
+# - core - limits the core file size (KB)
+# - data - max data size (KB)
+# - fsize - maximum filesize (KB)
+# - memlock - max locked-in-memory address space (KB)
+# - nofile - max number of open files
+# - rss - max resident set size (KB)
+# - stack - max stack size (KB)
+# - cpu - max CPU time (MIN)
+# - nproc - max number of processes
+# - as - address space limit (KB)
+# - maxlogins - max number of logins for this user
+# - maxsyslogins - max number of logins on the system
+# - priority - the priority to run user process with
+# - locks - max number of file locks the user can hold
+# - sigpending - max number of pending signals
+# - msgqueue - max memory used by POSIX message queues (bytes)
+# - nice - max nice priority allowed to raise to values: [-20, 19]
+# - rtprio - max realtime priority
+#
+#<domain> <type> <item> <value>
+#
+
+#* soft core 0
+#* hard rss 10000
+#@student hard nproc 20
+#@faculty soft nproc 20
+#@faculty hard nproc 50
+#ftp hard nproc 0
+#@student - maxlogins 4
+* - nofile 100000
+# End of file
+#end raw
+EOF
diff --git a/deploy/adapters/cobbler/snippets/preseed_network_config b/deploy/adapters/cobbler/snippets/preseed_network_config
index 7afd4169..651467a7 100644
--- a/deploy/adapters/cobbler/snippets/preseed_network_config
+++ b/deploy/adapters/cobbler/snippets/preseed_network_config
@@ -1,23 +1,23 @@
-#if $getVar("system_name","") != ""
-d-i netcfg/link_detection_timeout string 0
-d-i netcfg/dhcp_timeout string 0
-d-i netcfg/dhcpv6_timeout string 0
-d-i netcfg/enable boolean false
-d-i netcfg/disable_autoconfig boolean true
-d-i netcfg/use_autoconfig boolean false
-d-i netcfg/disable_dhcp boolean true
-d-i netcfg/dhcp_failed note
-d-i netcfg/dhcp_options select Configure network manually
-d-i hw-detect/load_firmware boolean true
-d-i netcfg/confirm_static boolean true
- #if $hostname != ""
-d-i netcfg/get_hostname string $hostname
-d-i netcfg/hostname string $hostname
- #end if
- #if $gateway != ""
-d-i netcfg/get_gateway string $gateway
- #end if
- #if $len($name_servers) > 0
-d-i netcfg/get_nameservers string $name_servers[0]
- #end if
-#end if
+#if $getVar("system_name","") != ""
+d-i netcfg/link_detection_timeout string 0
+d-i netcfg/dhcp_timeout string 0
+d-i netcfg/dhcpv6_timeout string 0
+d-i netcfg/enable boolean false
+d-i netcfg/disable_autoconfig boolean true
+d-i netcfg/use_autoconfig boolean false
+d-i netcfg/disable_dhcp boolean true
+d-i netcfg/dhcp_failed note
+d-i netcfg/dhcp_options select Configure network manually
+d-i hw-detect/load_firmware boolean true
+d-i netcfg/confirm_static boolean true
+ #if $hostname != ""
+d-i netcfg/get_hostname string $hostname
+d-i netcfg/hostname string $hostname
+ #end if
+ #if $gateway != ""
+d-i netcfg/get_gateway string $gateway
+ #end if
+ #if $len($name_servers) > 0
+d-i netcfg/get_nameservers string $name_servers[0]
+ #end if
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_ntp b/deploy/adapters/cobbler/snippets/preseed_ntp
index 68caf090..83b30559 100644
--- a/deploy/adapters/cobbler/snippets/preseed_ntp
+++ b/deploy/adapters/cobbler/snippets/preseed_ntp
@@ -1,70 +1,70 @@
-#if $getVar('ntp_server', '') == ""
- #set $ntp_server = '0.ubuntu.pool.ntp.org'
-#end if
-
-cat << EOF > /etc/ntp.conf
-# For more information about this file, see the man pages
-# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
-
-# Include the option tinker panic 0 at the top of your ntp.conf file.
-# By default, the NTP daemon sometimes panics and exits if the underlying clock
-# appears to be behaving erratically. This option causes the daemon to keep
-# running instead of panicking.
-tinker panic 0
-
-driftfile /var/lib/ntp/drift
-
-# Permit time synchronization with our time source, but do not
-# permit the source to query or modify the service on this system.
-restrict default kod nomodify notrap nopeer noquery
-restrict -6 default kod nomodify notrap nopeer noquery
-
-# Permit all access over the loopback interface. This could
-# be tightened as well, but to do so would effect some of
-# the administrative functions.
-restrict 127.0.0.1
-restrict -6 ::1
-
-# Hosts on local network are less restricted.
-# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
-
-# Use public servers from the pool.ntp.org project.
-# Please consider joining the pool (http://www.pool.ntp.org/join.html).
-# server 0.ubuntu.pool.ntp.org
-# server 1.ubuntu.pool.ntp.org
-# server 2.ubuntu.pool.ntp.org
-server $ntp_server
-
-# broadcast 192.168.1.255 autokey # broadcast server
-# broadcastclient # broadcast client
-# broadcast 224.0.1.1 autokey # multicast server
-# multicastclient 224.0.1.1 # multicast client
-# manycastserver 239.255.254.254 # manycast server
-# manycastclient 239.255.254.254 autokey # manycast client
-
-# Undisciplined Local Clock. This is a fake driver intended for backup
-# and when no outside source of synchronized time is available.
-server 127.127.1.0 # local clock
-
-# Enable public key cryptography.
-# crypto
-
-includefile /etc/ntp/crypto/pw
-
-# Key file containing the keys and key identifiers used when operating
-# with symmetric key cryptography.
-keys /etc/ntp/keys
-
-# Specify the key identifiers which are trusted.
-# trustedkey 4 8 42
-
-# Specify the key identifier to use with the ntpdc utility.
-# requestkey 8
-
-# Specify the key identifier to use with the ntpq utility.
-# controlkey 8
-
-# Enable writing of statistics records.
-# statistics clockstats cryptostats loopstats peerstats
-EOF
-update-rc.d ntp defaults 58 74
+#if $getVar('ntp_server', '') == ""
+ #set $ntp_server = '0.ubuntu.pool.ntp.org'
+#end if
+
+cat << EOF > /etc/ntp.conf
+# For more information about this file, see the man pages
+# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
+
+# Include the option tinker panic 0 at the top of your ntp.conf file.
+# By default, the NTP daemon sometimes panics and exits if the underlying clock
+# appears to be behaving erratically. This option causes the daemon to keep
+# running instead of panicking.
+tinker panic 0
+
+driftfile /var/lib/ntp/drift
+
+# Permit time synchronization with our time source, but do not
+# permit the source to query or modify the service on this system.
+restrict default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
+
+# Permit all access over the loopback interface. This could
+# be tightened as well, but to do so would effect some of
+# the administrative functions.
+restrict 127.0.0.1
+restrict -6 ::1
+
+# Hosts on local network are less restricted.
+# restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
+
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+# server 0.ubuntu.pool.ntp.org
+# server 1.ubuntu.pool.ntp.org
+# server 2.ubuntu.pool.ntp.org
+server $ntp_server
+
+# broadcast 192.168.1.255 autokey # broadcast server
+# broadcastclient # broadcast client
+# broadcast 224.0.1.1 autokey # multicast server
+# multicastclient 224.0.1.1 # multicast client
+# manycastserver 239.255.254.254 # manycast server
+# manycastclient 239.255.254.254 autokey # manycast client
+
+# Undisciplined Local Clock. This is a fake driver intended for backup
+# and when no outside source of synchronized time is available.
+server 127.127.1.0 # local clock
+
+# Enable public key cryptography.
+# crypto
+
+includefile /etc/ntp/crypto/pw
+
+# Key file containing the keys and key identifiers used when operating
+# with symmetric key cryptography.
+keys /etc/ntp/keys
+
+# Specify the key identifiers which are trusted.
+# trustedkey 4 8 42
+
+# Specify the key identifier to use with the ntpdc utility.
+# requestkey 8
+
+# Specify the key identifier to use with the ntpq utility.
+# controlkey 8
+
+# Enable writing of statistics records.
+# statistics clockstats cryptostats loopstats peerstats
+EOF
+update-rc.d ntp defaults 58 74
diff --git a/deploy/adapters/cobbler/snippets/preseed_partition_disks b/deploy/adapters/cobbler/snippets/preseed_partition_disks
index af93c2ea..e3b20bf2 100644
--- a/deploy/adapters/cobbler/snippets/preseed_partition_disks
+++ b/deploy/adapters/cobbler/snippets/preseed_partition_disks
@@ -1,23 +1,23 @@
-d-i partman-auto/init_automatically_partition string custom
-d-i partman-auto/automatically_partition string custom
-d-i partman-auto/method string lvm
-d-i partman-auto/purge_lvm_from_device boolean true
-d-i partman-auto-lvm/guided_size string max
-d-i partman-lvm/device_remove_lvm boolean true
-d-i partman-lvm/device_remove_lvm_span boolean true
-d-i partman-lvm/confirm boolean true
-d-i partman-lvm/confirm_nooverwrite boolean true
-d-i partman-md/device_remove_md boolean true
-d-i partman-md/confirm boolean true
-d-i partman-partitioning/confirm_write_new_label boolean true
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-d-i partman/default_filesystem string ext3
-d-i partman/mount_style select uuid
-d-i partman/confirm_write_changes_to_disks_and_configure_lvm boolean true
-d-i partman/choose_partition select Finish partitioning and write changes to disk
-d-i mdadm/boot_degraded boolean true
-d-i partman-auto-lvm/no_boot boolean true
-d-i partman-basicfilesystems/no_mount_point false
-d-i partman/filter_mounted boolean false
-d-i partman/unmount_active boolean false
+d-i partman-auto/init_automatically_partition string custom
+d-i partman-auto/automatically_partition string custom
+d-i partman-auto/method string lvm
+d-i partman-auto/purge_lvm_from_device boolean true
+d-i partman-auto-lvm/guided_size string max
+d-i partman-lvm/device_remove_lvm boolean true
+d-i partman-lvm/device_remove_lvm_span boolean true
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+d-i partman-md/device_remove_md boolean true
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+d-i partman/default_filesystem string ext3
+d-i partman/mount_style select uuid
+d-i partman/confirm_write_changes_to_disks_and_configure_lvm boolean true
+d-i partman/choose_partition select Finish partitioning and write changes to disk
+d-i mdadm/boot_degraded boolean true
+d-i partman-auto-lvm/no_boot boolean true
+d-i partman-basicfilesystems/no_mount_point false
+d-i partman/filter_mounted boolean false
+d-i partman/unmount_active boolean false
diff --git a/deploy/adapters/cobbler/snippets/preseed_post_anamon b/deploy/adapters/cobbler/snippets/preseed_post_anamon
index 5ed99760..6d889bb7 100644
--- a/deploy/adapters/cobbler/snippets/preseed_post_anamon
+++ b/deploy/adapters/cobbler/snippets/preseed_post_anamon
@@ -1,80 +1,80 @@
-#if $str($getVar('anamon_enabled','')) == "1"
-
-## install anamon script
- #if $getVar("compass_server", "") != ""
-wget -O /usr/local/sbin/anamon "http://$compass_server:$http_port/cobbler/aux/anamon"
- #else
-wget -O /usr/local/sbin/anamon "http://$server:$http_port/cobbler/aux/anamon"
- #end if
-## install anamon system service
-cat << EOF > /etc/init.d/anamon.init
-#raw
-#!/bin/bash
-## BEGIN INIT INFO
-# Provides: anamon.init
-# Default-Start: 3 5
-# Default-Stop: 0 1 2 4 6
-# Required-Start: $network
-# Short-Description: Starts the cobbler anamon boot notification program
-# Description: anamon runs the first time a machine is booted after
-# installation.
-## END INIT INFO
-
-#
-# anamon.init: Starts the cobbler post-install boot notification program
-#
-# chkconfig: 35 95 95
-#
-# description: anamon runs the first time a machine is booted after
-# installation.
-#
-#end raw
-cd /var/log/installer
-gunzip initial-status.gz
-cd -
-#if $getVar("compass_server","") != ""
-/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $compass_server --port $http_port --exit
-#else
-/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $server --port $http_port --exit
-#end if
-update-rc.d -f anamon remove
-mv /etc/init.d/anamon.init /tmp/anamon.init
-EOF
-
-## adjust permissions
-chmod 755 /etc/init.d/anamon.init /usr/local/sbin/anamon
-test -d /selinux && restorecon /etc/init.d/anamon.init /usr/local/sbin/anamon
-
-## enable the script
-update-rc.d anamon.init defaults 95 95
-#end if
-
-## place start-up script for updating os state
-#if $getVar('compass_server', '') != ""
- #set srv = $getVar('compass_server','')
-#else
- #set srv = $getVar('server','')
-#end if
-cat << EOF > /etc/init.d/set_state
-#raw
-#!/bin/bash
-# Provides: set_state
-# Default-Start: 3 5
-# Default-Stop: 0 1 2 4 6
-# Required-Start: $network $ssh
-# Short-Description: Notifies the os installation is finished
-# Description: set_state runs the first time a machine is booted after
-# installation.
-#end raw
-wget -O /tmp/os_state --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv/api/hosts/${hostname}/state_internal"
-update-rc.d -f set_state remove
-mv /etc/init.d/set_state /tmp/set_state
-EOF
-
-## adjust permissions
-chmod 755 /etc/init.d/set_state
-test -d /selinux && restorecon /etc/init.d/set_state
-
-update-rc.d set_state defaults 99 99
-
-echo "compass_server=$server" >> /etc/compass.conf
+#if $str($getVar('anamon_enabled','')) == "1"
+
+## install anamon script
+ #if $getVar("compass_server", "") != ""
+wget -O /usr/local/sbin/anamon "http://$compass_server:$http_port/cobbler/aux/anamon"
+ #else
+wget -O /usr/local/sbin/anamon "http://$server:$http_port/cobbler/aux/anamon"
+ #end if
+## install anamon system service
+cat << EOF > /etc/init.d/anamon.init
+#raw
+#!/bin/bash
+## BEGIN INIT INFO
+# Provides: anamon.init
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 4 6
+# Required-Start: $network
+# Short-Description: Starts the cobbler anamon boot notification program
+# Description: anamon runs the first time a machine is booted after
+# installation.
+## END INIT INFO
+
+#
+# anamon.init: Starts the cobbler post-install boot notification program
+#
+# chkconfig: 35 95 95
+#
+# description: anamon runs the first time a machine is booted after
+# installation.
+#
+#end raw
+cd /var/log/installer
+gunzip initial-status.gz
+cd -
+#if $getVar("compass_server","") != ""
+/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $compass_server --port $http_port --exit
+#else
+/usr/local/sbin/anamon --watchfile "/var/log/installer/syslog /var/log/installer/hardware-summary /var/log/installer/initial-status /var/log/installer/status" --name $name --server $server --port $http_port --exit
+#end if
+update-rc.d -f anamon remove
+mv /etc/init.d/anamon.init /tmp/anamon.init
+EOF
+
+## adjust permissions
+chmod 755 /etc/init.d/anamon.init /usr/local/sbin/anamon
+test -d /selinux && restorecon /etc/init.d/anamon.init /usr/local/sbin/anamon
+
+## enable the script
+update-rc.d anamon.init defaults 95 95
+#end if
+
+## place start-up script for updating os state
+#if $getVar('compass_server', '') != ""
+ #set srv = $getVar('compass_server','')
+#else
+ #set srv = $getVar('server','')
+#end if
+cat << EOF > /etc/init.d/set_state
+#raw
+#!/bin/bash
+# Provides: set_state
+# Default-Start: 3 5
+# Default-Stop: 0 1 2 4 6
+# Required-Start: $network $ssh
+# Short-Description: Notifies the os installation is finished
+# Description: set_state runs the first time a machine is booted after
+# installation.
+#end raw
+wget -O /tmp/os_state --post-data='{"ready": true}' --header=Content-Type:application/json "http://$srv/api/hosts/${hostname}/state_internal"
+update-rc.d -f set_state remove
+mv /etc/init.d/set_state /tmp/set_state
+EOF
+
+## adjust permissions
+chmod 755 /etc/init.d/set_state
+test -d /selinux && restorecon /etc/init.d/set_state
+
+update-rc.d set_state defaults 99 99
+
+echo "compass_server=$server" >> /etc/compass.conf
diff --git a/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config b/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config
index 1d8a34be..6ea56c56 100644
--- a/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config
+++ b/deploy/adapters/cobbler/snippets/preseed_post_apt_repo_config
@@ -1,68 +1,67 @@
-#set profile_name = $getVar('profile_name','')
-#set os_info = $profile_name.split('-')
-#set osname = $os_info[0].lower()
-#set osversion = $os_info[1]
-#set osversion_flat = $osversion.replace('.', '_')
-
-cat << EOF > /etc/apt/apt.conf
-APT::Get::Assume-Yes "true";
-APT::Get::force-yes "true";
-#if $getVar('proxy', '') != ''
-Acquire::http::Proxy "$proxy";
-#end if
-Acquire::http::Proxy::$http_server DIRECT;
-#if $getVar("local_repo","") != ""
- #import urlparse
- #set $local_repo_url = $urlparse.urlparse($local_repo)
- #set $local_repo_server = $local_repo_url.hostname
- #if $http_server != $local_repo_server
-Acquire::http::Proxy::${local_repo_server} DIRECT;
- #end if
-#end if
-EOF
-
-
-#if $getVar("local_repo", "") == "" or $getVar("local_repo_only","1") == "0"
- #set repos_snippet = 'apt.repos.d/%s/%s/preseed_repos' % ($osname, $osversion)
-$SNIPPET($repos_snippet)
-#end if
-
-#if $arch == "x86_64"
- #set $rarch = "[arch=amd64]"
-#else
- #set $rarch = "[arch=%s]" % $arch
-#end if
-
-rm -f /etc/apt/sources.list
-cat << EOF >> /etc/apt/sources.list
-deb ${rarch} $tree $os_version main restricted
-EOF
-
-cat << EOF >> /etc/apt/sources.list
- #set $repo_data = $getVar("repo_data",[])
- #for $repo in $repo_data
- #for $dist in $repo.apt_dists
- #set $comps = " ".join($repo.apt_components)
- #if $repo.comment != ""
-# ${repo.comment}
- #end if
- #if $repo.mirror_locally
-deb ${rarch} http://$http_server/cblr/repo_mirror/${repo.name} $dist $comps
- #else
-deb ${rarch} ${repo.mirror} $dist $comps
- #end if
- #end for
- #end for
-EOF
-
-#if $getVar("local_repo","") != ""
-cat << EOF >> /etc/apt/sources.list
-#set compass_repo = 'apt.repos.d/%s/%s/ubuntu_repo' % ($osname, $osversion)
-deb ${rarch} $local_repo/$compass_repo/ local_repo main
-EOF
-
-
- #if $getVar("local_repo_only","1") != "0"
-apt-get -y update
- #end if
-#end if
+#set profile_name = $getVar('profile_name','')
+#set os_info = $profile_name.split('-')
+#set osname = $os_info[0].lower()
+#set osversion = $os_info[1]
+#set osversion_flat = $osversion.replace('.', '_')
+
+cat << EOF > /etc/apt/apt.conf
+APT::Get::Assume-Yes "true";
+APT::Get::force-yes "true";
+#if $getVar('proxy', '') != ''
+Acquire::http::Proxy "$proxy";
+#end if
+Acquire::http::Proxy::$http_server DIRECT;
+#if $getVar("local_repo","") != ""
+ #import urlparse
+ #set $local_repo_url = $urlparse.urlparse($local_repo)
+ #set $local_repo_server = $local_repo_url.hostname
+ #if $http_server != $local_repo_server
+Acquire::http::Proxy::${local_repo_server} DIRECT;
+ #end if
+#end if
+EOF
+
+
+#if $getVar("local_repo", "") == "" or $getVar("local_repo_only","1") == "0"
+ #set repos_snippet = 'apt.repos.d/%s/%s/preseed_repos' % ($osname, $osversion)
+$SNIPPET($repos_snippet)
+#end if
+
+#if $arch == "x86_64"
+ #set $rarch = "[arch=amd64]"
+#else
+ #set $rarch = "[arch=%s]" % $arch
+#end if
+
+rm -f /etc/apt/sources.list
+cat << EOF >> /etc/apt/sources.list
+deb ${rarch} $tree $os_version main restricted
+EOF
+
+cat << EOF >> /etc/apt/sources.list
+ #set $repo_data = $getVar("repo_data",[])
+ #for $repo in $repo_data
+ #for $dist in $repo.apt_dists
+ #set $comps = " ".join($repo.apt_components)
+ #if $repo.comment != ""
+# ${repo.comment}
+ #end if
+ #if $repo.mirror_locally
+deb ${rarch} http://$http_server/cblr/repo_mirror/${repo.name} $dist $comps
+ #else
+deb ${rarch} ${repo.mirror} $dist $comps
+ #end if
+ #end for
+ #end for
+EOF
+
+#if $getVar("local_repo","") != ""
+cat << EOF >> /etc/apt/sources.list
+#set compass_repo = 'apt.repos.d/%s/%s/ubuntu_repo' % ($osname, $osversion)
+deb ${rarch} $local_repo/$compass_repo/ local_repo main
+EOF
+
+ #if $getVar("local_repo_only","1") != "0"
+apt-get -y update
+ #end if
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_post_install_kernel_options b/deploy/adapters/cobbler/snippets/preseed_post_install_kernel_options
index 0d937490..1cff9c99 100644
--- a/deploy/adapters/cobbler/snippets/preseed_post_install_kernel_options
+++ b/deploy/adapters/cobbler/snippets/preseed_post_install_kernel_options
@@ -1,14 +1,14 @@
-#if $getVar('kernel_options_post','') != ''
-# Start post install kernel options update
-if [ -f /etc/default/grub ]; then
- TMP_GRUB=\$(gawk 'match(\$0,/^GRUB_CMDLINE_LINUX="([^"]+)"/,a) {printf("%s\n",a[1])}' /etc/default/grub)
- sed -i '/^GRUB_CMDLINE_LINUX=/d' /etc/default/grub
- echo "GRUB_CMDLINE_LINUX=\"\$TMP_GRUB $kernel_options_post\"" >> /etc/default/grub
- grub2-mkconfig -o /boot/grub2/grub.cfg
-else
- /sbin/grubby --update-kernel=\$(/sbin/grubby --default-kernel) --args="$kernel_options_post"
-fi
-# End post install kernel options update
-#end if
-
-
+#if $getVar('kernel_options_post','') != ''
+# Start post install kernel options update
+if [ -f /etc/default/grub ]; then
+ TMP_GRUB=\$(gawk 'match(\$0,/^GRUB_CMDLINE_LINUX="([^"]+)"/,a) {printf("%s\n",a[1])}' /etc/default/grub)
+ sed -i '/^GRUB_CMDLINE_LINUX=/d' /etc/default/grub
+ echo "GRUB_CMDLINE_LINUX=\"\$TMP_GRUB $kernel_options_post\"" >> /etc/default/grub
+ grub2-mkconfig -o /boot/grub2/grub.cfg
+else
+ /sbin/grubby --update-kernel=\$(/sbin/grubby --default-kernel) --args="$kernel_options_post"
+fi
+# End post install kernel options update
+#end if
+
+
diff --git a/deploy/adapters/cobbler/snippets/preseed_post_install_network_config b/deploy/adapters/cobbler/snippets/preseed_post_install_network_config
index 177769cf..3e577830 100644
--- a/deploy/adapters/cobbler/snippets/preseed_post_install_network_config
+++ b/deploy/adapters/cobbler/snippets/preseed_post_install_network_config
@@ -1,630 +1,630 @@
-## Start post_install_network_config generated code
-#if $getVar('promisc_nics', '') != ""
- #set promisc_interfaces = [promisc.strip() for promisc in $promisc_nics.split(',') if promisc.strip()]
-#else
- #set promisc_interfaces = []
-#end if
-#if $hostname != ""
-# set the hostname
-echo "$hostname" > /etc/hostname
-/bin/hostname $hostname
-#end if
-
-#set osversion = $getVar("os_version","")
-
-$SNIPPET('preseed_hosts')
-
-#set $num_ns_search = $len($name_servers_search)
-#if $num_ns_search > 0
-sed -i -e "/^search /d" /etc/resolv.conf
-echo -n "search " >>/etc/resolv.conf
- #for $nameserversearch in $name_servers_search
-echo -n "$nameserversearch " >>/etc/resolv.conf
- #end for
-echo "" >>/etc/resolv.conf
-#end if
-
-#set $num_ns = $len($name_servers)
-#if $num_ns > 0
-sed -i -e "/^nameserver /d" /etc/resolv.conf
- #for $nameserver in $name_servers
-echo "nameserver $nameserver" >>/etc/resolv.conf
- #end for
-#end if
-
-echo '' > /tmp/network_log
-
-# get physical interfaces
-physical_interfaces=""
-for physical_interface in \$(ip -o link | cut -d: -f2 | grep -v lo); do
- echo "processing physical interface \${physical_interface}" >> /tmp/network_log
- if [ -z "\${physical_interfaces}" ]; then
- physical_interfaces="\${physical_interface}"
- else
- physical_interfaces="\${physical_interfaces} \${physical_interface}"
- fi
- eval "physical_interface_\${physical_interface}=\${physical_interface}"
-done
-echo "physical interfaces: \${physical_interfaces}" >> /tmp/network_log
-
-# map physical interface to mac address
-mac_names=""
-for physical_interface in \${physical_interfaces}; do
- set \$(ip link show \${physical_interface})
-#if $osversion == "trusty"
- mac=\$(echo \$@ | cut -d' ' -f17)
-#else
- mac=\$(echo \$@ | cut -d' ' -f13)
-#end if
- mac_name=\$(echo \${mac} |tr 'a-z' 'A-Z' | tr ':' '_')
- if [ -z "\${mac_name}" ]; then
- mac_names="\${mac_name}"
- else
- mac_names="\${mac_names} \${mac_name}"
- fi
- echo "mapping physical interface \${physical_interface} to mac \${mac}" >> /tmp/network_log
- eval "physical_interface_mac_\${physical_interface}=\$mac"
- eval "physical_mac_interface_\${mac_name}=\${physical_interface}"
- eval "mac_name_\${mac_name}=\$mac"
-done
-
-echo "list physical interfaces to mac" >> /tmp/network_log
-for physical_interface in \${physical_interfaces}; do
- eval "mac=\\${physical_interface_mac_\${physical_interface}}"
- echo "physical interface to mac: \${physical_interface} => \${mac}" >> /tmp/network_log
-done
-
-echo "list mac to physical interface mapping" >> /tmp/network_log
-for mac_name in \${mac_names}; do
- eval "mac=\\${mac_name_\${mac_name}}"
- eval "physical_interface=\\${physical_mac_interface_\${mac_name}}"
- echo "mac to physical interface: \${mac} => \${physical_interface}" >> /tmp/network_log
-done
-
-logical_interfaces=""
-#set ikeys = $interfaces.keys()
-#import re
-#set $vlanpattern = $re.compile("([a-zA-Z0-9]+)[\.][0-9]+")
-#set $subinterfacepattern = $re.compile("([a-zA-Z0-9]+)[:][0-9]+")
-#set $numbondingdevs = 0
-#for $iname in $ikeys
- #set $idata = $interfaces[$iname]
- #set $mac = $idata.get("mac_address", "").upper()
- #set $interface_type = $idata.get("interface_type", "").lower()
- #if $interface_type in ("master","bond","bonded_bridge_slave")
- #set $numbondingdevs += 1
- #end if
- #if $interface_type in ("master","bond","bridge","bonded_bridge_slave")
- #continue
- #end if
- #if $vlanpattern.match($iname)
- #set $interface_matched = $vlanpattern.match($iname)
- #set $interface_name = $interface_matched.group(1)
-logical_interface=${interface_name}
- #elif $subinterfacepattern.match($iname)
- #set $interface_matched = $subinterfacepattern.match($iname)
- #set $interface_name = $interface_matched.group(1)
-logical_interface=${interface_name}
- #else
-logical_interface=$iname
- #end if
-if [ -z "\${logical_interfaces}" ]; then
- logical_interfaces="\${logical_interface}"
-else
- logical_interfaces="\${logical_interfaces} \${logical_interface}"
-fi
-eval "logical_interface_\${logical_interface}=\${logical_interface}"
- #if $mac != ""
- #set mac_name = $mac.replace(':', '_')
-physical_interface=\${physical_mac_interface_${mac_name}}
-eval "logical_interface_mapping_\${logical_interface}=\${physical_interface}"
-if [ ! -z "\${physical_interface}" ]; then
- eval "physical_interface_mapping_\${physical_interface}=\${logical_interface}"
-fi
- #else
-eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
-if [ -z "\${physical_interface}" ]; then
- eval "logical_interface_mapping_\${logical_interface}="
-fi
- #end if
-#end for
-
-echo "logical interfaces: \${logical_interfaces}" >> /tmp/network_log
-
-echo "finish mapping logical interfaces in network config to physical interfaces" >> /tmp/network_log
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
-done
-for key in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${key}}"
- echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
-done
-
-# map unmapped logical interface to the same name physical interface
-echo "mapping unmapped logical interfaces to the same name physical interfaces" >> /tmp/network_log
-for logical_interface in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
- if [ ! -z "\${physical_interface}" ]; then
- echo "ignore logical interface \${logical_interface} where its physical interface is \${physical_interface}" >> /tmp/network_log
- continue
- fi
- # check if the same name physical interface is mapped
- eval "mapped_logical_interface=\\${physical_interface_mapping_\${logical_interface}}"
- if [ ! -z "\${mapped_logical_interface}" ]; then
- echo "ignore logical interface \${logical_interface} since the same name physical interface is mapped by logical interface \${mapped_logical_interface}" >> /tmp/network_log
- continue
- fi
- # check if the same name physical interface exists
- eval "mapped_logical_interface=\\${physical_interface_\${logical_interface}}"
- if [ -z "\${mapped_logical_interface}" ]; then
- echo "ignore logical interface \${logical_interface} since the same name physical interface does not exist" >> /tmp/network_log
- continue
- fi
- eval "logical_interface_mapping_\${logical_interface}=\${logical_interface}"
- eval "physical_interface_mapping_\${logical_interface}=\${logical_interface}"
- echo "set logical interface \${logical_interface} to the same physical interface" >> /tmp/network_log
-done
-
-echo "finish mapping unmapped logical interfaces in network config to the same name physical interfaces" >> /tmp/network_log
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
-done
-for key in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${key}}"
- echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
-done
-
-
-unset_physical_interfaces=""
-echo "get unset physical interfaces from \${physical_interfaces}" >> /tmp/network_log
-for physical_interface in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${physical_interface}}"
- if [ ! -z "\${logical_interface}" ]; then
- echo "physical interface \${physical_interface} is already set to \${logical_interface}" >> /tmp/network_log
- continue
- fi
- if [ -z "\${unset_physical_interfaces}" ]; then
- unset_physical_interfaces="\${physical_interface}"
- else
- unset_physical_interfaces="\${unset_physical_interfaces} \${physical_interface}"
- fi
- eval "unset_physical_interface_\${physical_interface}=\${physical_interface}"
-done
-echo "unset physical interfaces \${unset_physical_interfaces}" >> /tmp/network_log
-
-unset_logical_interfaces=""
-echo "get unset logical interfaces from \${logical_interfaces}" >> /tmp/network_log
-for logical_interface in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
- if [ ! -z "\${physical_interface}" ]; then
- echo "logical interface \${logical_interface} is already set to \${physical_interface}" >> /tmp/network_log
- continue
- fi
- if [ -z "\${unset_logical_interfaces}" ]; then
- unset_logical_interfaces="\${logical_interface}"
- else
- unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
- fi
-done
-echo "unset logical interfaces \${unset_logical_interfaces}" >> /tmp/network_log
-
-sorted_unset_physical_interfaces=\$(printf '%s\n' \${unset_physical_interfaces} | sort | xargs)
-echo "sorted unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
-sorted_unset_logical_interfaces=\$(printf '%s\n' \${unset_logical_interfaces} | sort | xargs)
-echo "sorted unset logical interfaces \${sorted_unset_logical_interfaces}" >> /tmp/network_log
-
-# map unset logical interface to unset physical interface
-echo "map unset logical interfaces \${sorted_unset_logical_interfaces} to unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
-unset_logical_interfaces=""
-for logical_interface in \${sorted_unset_logical_interfaces}; do
- set \${sorted_unset_physical_interfaces}
- physical_interface_num=\$#;
- if [ \${physical_interface_num} -gt 0 ]; then
- physical_interface=\$1
- shift 1
- sorted_unset_physical_interfaces="\$@"
- echo "map unset logical interface \${logical_interface} to unset physical interface \${physical_interface}" >> /tmp/network_log
- eval "physical_interface_mapping_\${physical_interface}=\${logical_interface}"
- eval "logical_interface_mapping_\${logical_interface}=\${physical_interface}"
- else
- echo "remain unset logical interface \${logical_interface} since there is no remain unset physical interfaces" >> /tmp/network_log
- if [ -z "\${unset_logical_interfaces}" ]; then
- unset_logical_interfaces="\${logical_interface}"
- else
- unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
- fi
- fi
-done
-sorted_unset_logical_interfaces=\${unset_logical_interfaces}
-unset_physical_interfaces=\${sorted_unset_physical_interfaces}
-
-echo "finish mapping unmapped logical interfaces in network config to unmapped physical interfaces" >> /tmp/network_log
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
-done
-for key in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${key}}"
- echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
-done
-
-echo "unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
-echo "unset logical interfaces \${sorted_unset_logical_interfaces}" >> /tmp/network_log
-
-# map remaining unmapped logical interfaces
-echo "map remaining unmapped logical interfaces" >> /tmp/network_log
-if [ ! -z "\${sorted_unset_logical_interfaces}" ]; then
- # get all available logical interfaces which the same name physical interface is not used
- available_logical_interfaces=""
- for logical_interface in \${logical_interfaces}; do
- eval "mapped_logical_interface=\\${physical_interface_mapping_\${logical_interface}}"
- if [ -z "\${mapped_logical_interface}" ]; then
- eval "available_logical_interface_\${logical_interface}=\${logical_interface}"
- if [ -z "\${available_logical_interfaces}" ]; then
- available_logical_interfaces="\${logical_interface}"
- else
- available_logical_interfaces="\${available_logical_interfaces} \${logical_interface}"
- fi
- else
- echo "ignore logical interface \${logical_interface} since the same name physical interface mapped to logical interface \${mapped_logical_interface}" >> /tmp/network_log
- fi
- done
-
- # add extra logical interfaces name to physical interfaces
- if [ -z "\${physical_interfaces}" ]; then
- physical_interfaces="\${available_logical_interfaces}"
- else
- physical_interfaces="\${physical_interfaces} \${available_logical_interfaces}"
- fi
- echo "updated physical interfaces: \${physical_interfaces}" >> /tmp/network_log
-
- #first map logical interface to the same name physical interface if that physical interface name is not used
- unset_logical_interfaces=""
- for logical_interface in \${sorted_unset_logical_interfaces}; do
- eval "available_logical_interface=\\${available_logical_interface_\${logical_interface}}"
- if [ ! -z "\${available_logical_interface}" ]; then
- eval "physical_interface_mapping_\${available_logical_interface}=\${logical_interface}"
- eval "logical_interface_mapping_\${logical_interface}=\${available_logical_interface}"
- else
- if [ -z "\${unset_logical_interfaces}" ]; then
- unset_logical_interfaces="\${logical_interface}"
- else
- unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
- fi
- fi
- done
- sorted_unset_logical_interfaces=\${unset_logical_interfaces}
-
- # map remain unset logical interfaces to available logical interface names
- for logical_interface in \${sorted_unset_logical_interfaces}; do
- for available_logical_interface in \${available_logical_interfaces}; do
- eval "mapped_logical_interface=\\${physical_interface_mapping_\${available_logical_interface}}"
- if [ -z "\${mapped_logical_interface}" ]; then
- eval "physical_interface_mapping_\${available_logical_interface}=\${logical_interface}"
- eval "logical_interface_mapping_\${logical_interface}=\${available_logical_interface}"
- break
- fi
- done
- done
-fi
-unset_logical_interfaces=""
-sorted_unset_logical_interfaces=""
-
-echo "finish mapping ramaining unmapped logical interfaces" >> /tmp/network_log
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
-done
-for key in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${key}}"
- echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
-done
-
-# map remaining unmapped physical interfaces
-echo "map remaining unmapped physical interfaces" >> /tmp/network_log
-if [ ! -z "\${sorted_unset_physical_interfaces}" ]; then
- # get all available physical interfaces which the same name logical interface is not used
- available_physical_interfaces=""
- for physical_interface in \${physical_interfaces}; do
- eval "mapped_physical_interface=\\${logical_interface_mapping_\${physical_interface}}"
- if [ -z "\${mapped_physical_interface}" ]; then
- eval "available_physical_interface_\${physical_interface}=\${physical_interface}"
- if [ -z "\${available_physical_interfaces}" ]; then
- available_physical_interfaces="\${physical_interface}"
- else
- available_physical_interfaces="\${available_physical_interfaces} \${physical_interface}"
- fi
- else
- echo "ignore physical interface \${physical_interface} since the same name logical interface mapped to physical interface \${mapped_physical_interface}" >> /tmp/network_log
- fi
- done
-
- # add extra physical interfaces name to logical interfaces
- if [ -z "\${logical_interfaces}" ]; then
- logical_interfaces="\${available_physical_interfaces}"
- else
- logical_interfaces="\${logical_interfaces} \${available_physical_interfaces}"
- fi
- echo "updated logical interfaces: \${logical_interfaces}" >> /tmp/network_log
-
- #first map physical interface to the same name logical interface if that logical interface name is not used
- unset_physical_interfaces=""
- for physical_interface in \${sorted_unset_physical_interfaces}; do
- eval "available_physical_interface=\\${available_physical_interface_\${physical_interface}}"
- if [ ! -z "\${available_physical_interface}" ]; then
- eval "logical_interface_mapping_\${available_physical_interface}=\${physical_interface}"
- eval "physical_interface_mapping_\${physical_interface}=\${available_physical_interface}"
- else
- if [ -z "\${unset_physical_interfaces}" ]; then
- unset_physical_interfaces="\${physical_interface}"
- else
- unset_physical_interfaces="\${unset_physical_interfaces} \${physical_interface}"
- fi
- fi
- done
- sorted_unset_physical_interfaces=\${unset_physical_interfaces}
-
- # map remain unset physical interfaces to logical interface name as available physical interface names
- for physical_interface in \${sorted_unset_physical_interfaces}; do
- for available_physical_interface in \${available_physical_interfaces}; do
- eval "mapped_physical_interface=\\${logical_interface_mapping_\${available_physical_interface}}"
- if [ -z "\${mapped_physical_interface}" ]; then
- eval "logical_interface_mapping_\${available_physical_interface}=\${physical_interface}"
- eval "physical_interface_mapping_\${physical_interface}=\${available_physical_interface}"
- break
- fi
- done
- done
-fi
-unset_physical_interfaces=""
-sorted_unset_physical_interfaces=""
-
-echo "finish mapping ramaining unmapped physical interfaces" >> /tmp/network_log
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
-done
-for key in \${physical_interfaces}; do
- eval "logical_interface=\\${physical_interface_mapping_\${key}}"
- echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
-done
-
-for key in \${logical_interfaces}; do
- eval "physical_interface=\\${logical_interface_mapping_\${key}}"
- if [ ! -z "\${physical_interface}" ]; then
- eval "physical_mac=\\${physical_interface_mac_\${physical_interface}}"
- else
- physical_mac=""
- fi
- if [ ! -z "\${physical_mac}" ]; then
- physical_mac=\$(echo \${physical_mac} | tr 'A-Z' 'a-z')
- echo "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"\${physical_mac}\", ATTR{type}==\"1\", KERNEL==\"eth*\", NAME=\"\$key\"" >> /etc/udev/rules.d/70-persistent-net.rules.new
- echo "add network interface \$key mac \${physical_mac} into udev rules" >> /tmp/network_log
- else
- echo "network interface \$key does not find mac address to add to udev rules" >> /tmp/network_log
- fi
-done
-
-#if $numbondingdevs > 0
-# we have bonded interfaces, so set max_bonds
-if [ -f "/etc/modprobe.conf" ]; then
- echo "options bonding max_bonds=$numbondingdevs" >> /etc/modprobe.conf
-fi
-#end if
-
-## =============================================================================
-## Rewrite the interfaces file and make sure we preserve the loopback device
-echo "auto lo" > /etc/network/interfaces
-echo " iface lo inet loopback" >> /etc/network/interfaces
-echo "" >> /etc/network/interfaces
-
-#set $nameserver_set = 0
-
-#for $iname in $ikeys
- #set $idata = $interfaces[$iname]
- #set $mac = $idata.get("mac_address", "").upper()
- #set $iface_type = $idata.get("interface_type", "").lower()
- #set $mtu = $idata.get("mtu", "")
- #set $static = $idata.get("static", "")
- #set $management = $idata.get("management", "")
- #set $ip = $idata.get("ip_address", "")
- #set $netmask = $idata.get("netmask", "")
- #set $if_gateway = $idata.get("if_gateway", "")
- #set $static_routes = $idata.get("static_routes", "")
- #set $iface_master = $idata.get("interface_master", "")
- #set $bonding_opts = $idata.get("bonding_opts", "")
- #set $bridge_opts = $idata.get("bridge_opts", "")
-
-used_logical_interface_$iname=$iname
-
- #if $iface_type in ("slave","bond_slave","bridge_slave","bonded_bridge_slave")
- #set $static = 1
- #end if
-echo "auto $iname" >> /etc/network/interfaces
-
- #if $static
-echo "iface $iname inet static" >> /etc/network/interfaces
- #else
-echo "iface $iname inet dhcp" >> /etc/network/interfaces
- #end if
-
- #if $iface_type not in ("master","bond","bridge","bonded_bridge_slave")
- #if $vlanpattern.match($iname)
- #pass
- #else
- #set $interface_matched = $subinterfacepattern.match($iname)
- #if $interface_matched
- #set $interface_name = $interface_matched.group(1)
-logical_interface=$interface_name
- #else
-logical_interface=$iname
- #end if
-eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
-if [ ! -z "\${physical_interface}" ]; then
- eval "physical_mac=\\${physical_interface_mac_\${physical_interface}}"
-fi
-if [ ! -z "\${physical_mac}" ]; then
- echo " hwaddress ether \${physical_mac}" >> /etc/network/interfaces
-fi
- #if not $subinterfacepattern.match($iname)
-if [ -f "/etc/modprobe.conf" ] && [ ! -z "\${physical_interface}" ]; then
- grep \${physical_interface} /etc/modprobe.conf | sed "s/\${physical_interface}/$iname/" >> /etc/modprobe.conf.cobbler
- grep -v \${physical_interface} /etc/modprobe.conf >> /etc/modprobe.conf.new
- rm -f /etc/modprobe.conf
- mv /etc/modprobe.conf.new /etc/modprobe.conf
-fi
- #end if
- #end if
- #end if
-
- #if $iface_type in ("master","bond","bonded_bridge_slave")
- ## if this is a bonded interface, configure it in modprobe.conf
-if [ -f "/etc/modprobe.conf" ]; then
- #if $osversion == "rhel4"
- echo "install $iname /sbin/modprobe bonding -o $iname $bonding_opts" >> /etc/modprobe.conf.cobbler
- #else
- echo "alias $iname bonding" >> /etc/modprobe.conf.cobbler
- #end if
-fi
- #set $bondslaves = ""
- #for $bondiname in $ikeys
- #set $bondidata = $interfaces[$bondiname]
- #set $bondiface_type = $bondidata.get("interface_type", "").lower()
- #set $bondiface_master = $bondidata.get("interface_master", "")
- #if $bondiface_master == $iname
- #set $bondslaves += $bondiname + " "
- #end if
- #end for
-echo " bond-slaves $bondslaves" >> /etc/network/interfaces
-
- #if $bonding_opts != ""
- #for $bondopts in $bonding_opts.split(" ")
- #set [$bondkey, $bondvalue] = $bondopts.split("=")
-echo " bond-$bondkey $bondvalue" >> /etc/network/interfaces
- #end for
- #end if
- #elif $iface_type in ("slave","bond_slave") and $iface_master != ""
-echo " bond-master $iface_master" >> /etc/network/interfaces
- #end if
-
- #if $iface_type == "bridge"
- #set $bridgeslaves = ""
- #for $bridgeiname in $ikeys
- #set $bridgeidata = $interfaces[$bridgeiname]
- #set $bridgeiface_type = $bridgeidata.get("interface_type", "").lower()
- #set $bridgeiface_master = $bridgeidata.get("interface_master", "")
- #if $bridgeiface_master == $iname
- #set $bridgeslaves += $bridgeiname + " "
- #end if
- #end for
-echo " bridge_ports $bridgeslaves" >> /etc/network/interfaces
- #if $bridge_opts != ""
- #for $bridgeopts in $bridge_opts.split(" ")
- #set [$bridgekey, $bridgevalue] = $bridgeopts.split("=")
-echo " bridge_$bridgekey $bridgevalue" >> /etc/network/interfaces
- #end for
- #end if
- #elif $iface_type in ["bridge_slave", "bonded_bridge_slave"] and $iface_master != ""
- #pass
- #end if
-
- #if $static
- #if $iname in $promisc_interfaces
-echo " address 0.0.0.0" >> /etc/network/interfaces
-echo " up ip link set $iname up" >> /etc/network/interfaces
-echo " up ip link set $iname promisc on" >> /etc/network/interfaces
-echo " down ip link set $iname promisc off" >> /etc/network/interfaces
-echo " down ip link set $iname down" >> /etc/network/interfaces
- #elif $ip != ""
-echo " address $ip" >> /etc/network/interfaces
- #if $netmask == ""
- ## Default to 255.255.255.0?
- #set $netmask = "255.255.255.0"
- #end if
-echo " netmask $netmask" >> /etc/network/interfaces
- #import netaddr
- #set interface_network = $netaddr.IPNetwork('%s/%s' % ($ip, $netmask))
- #set interface_network_str = $str($interface_network)
- #if $if_gateway != ""
-echo " gateway $if_gateway" >> /etc/network/interfaces
- #elif $gateway != ""
- #set gateway_address = $netaddr.IPAddress($gateway)
- #if $gateway_address in $interface_network
-echo " gateway $gateway" >> /etc/network/interfaces
- #end if
- #end if
- #end if
- #else
- #pass
- #end if
-
- #if $mtu != ""
-echo " mtu $mtu" >> /etc/network/interfaces
- #end if
-
- #if not $nameserver_set
- #if $iface_type not in ("slave","bond_slave","bridge_slave","bonded_bridge_slave")
- #set $nameservers = ' '.join($name_servers)
- #set $nameserver_search = ' '.join($name_servers_search)
- #if $nameservers != ""
-echo " dns-nameservers $nameservers" >> /etc/network/interfaces
- #end if
- #if $nameserver_search != ""
-echo " dns-search $nameserver_search" >> /etc/network/interfaces
- #end if
- #set $nameserver_set = 1
- #end if
- #end if
-
- #for $route in $static_routes
- #set routepattern = $re.compile("[0-9/.]+:[0-9.]+")
- #if $routepattern.match($route)
- #set [$network, $router] = $route.split(":")
-echo " up ip route add $network via $router dev $iname" >> /etc/network/interfaces
- #else
-echo " # Warning: invalid route: $route" >> /etc/network/interfaces
- #end if
- #end for
-
-echo "" >> /etc/network/interfaces
-#end for
-
-for logical_interface in \${logical_interfaces}; do
- eval "used_logical_interface=\\${used_logical_interface_\${logical_interface}}"
- if [ ! -z "\${used_logical_interface}" ]; then
- # ignore logical interface that is already generated in above
- echo "ignore used logical interface \${logical_interface}" >> /tmp/network_log
- continue
- fi
- echo "add logical interface \${logical_interface} into network config since it is not set above" >> /tmp/network_log
- eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
- if [ ! -z "\${physical_interface}" ]; then
- echo "auto \${logical_interface}" >> /etc/network/interfaces
- echo "iface \${logical_interface} inet static" >> /etc/network/interfaces
- eval "mac=\\${physical_interface_mac_\${physical_interface}}"
- if [ ! -z "\$mac" ]; then
- echo " hwaddress ether \${mac}" >> /etc/network/interfaces
- fi
- echo "" >> /etc/network/interfaces
- if [ -f "/etc/modprobe.conf" ] && [ ! -z "\${physical_interface}" ]; then
- grep \${physical_interface} /etc/modprobe.conf | sed "s/\${physical_interface}/\${logical_interface}/" >> /etc/modprobe.conf.cobbler
- grep -v \${physical_interface} /etc/modprobe.conf >> /etc/modprobe.conf.new
- rm -f /etc/modprobe.conf
- mv /etc/modprobe.conf.new /etc/modprobe.conf
- fi
- fi
-done
-
-if [ -f "/etc/modprobe.conf" ]; then
- cat /etc/modprobe.conf.cobbler >> /etc/modprobe.conf
- rm -f /etc/modprobe.conf.cobbler
-fi
-if [ -f "/etc/udev/rules.d/70-persistent-net.rules" ]; then
- rm -f /etc/udev/rules.d/70-persistent-net.rules
-fi
-if [ -f "/etc/udev/rules.d/70-persistent-net.rules.new" ]; then
- mv /etc/udev/rules.d/70-persistent-net.rules.new /etc/udev/rules.d/70-persistent-net.rules
-fi
-## End post_install_network_config generated code
+## Start post_install_network_config generated code
+#if $getVar('promisc_nics', '') != ""
+ #set promisc_interfaces = [promisc.strip() for promisc in $promisc_nics.split(',') if promisc.strip()]
+#else
+ #set promisc_interfaces = []
+#end if
+#if $hostname != ""
+# set the hostname
+echo "$hostname" > /etc/hostname
+/bin/hostname $hostname
+#end if
+
+#set osversion = $getVar("os_version","")
+
+$SNIPPET('preseed_hosts')
+
+#set $num_ns_search = $len($name_servers_search)
+#if $num_ns_search > 0
+sed -i -e "/^search /d" /etc/resolv.conf
+echo -n "search " >>/etc/resolv.conf
+ #for $nameserversearch in $name_servers_search
+echo -n "$nameserversearch " >>/etc/resolv.conf
+ #end for
+echo "" >>/etc/resolv.conf
+#end if
+
+#set $num_ns = $len($name_servers)
+#if $num_ns > 0
+sed -i -e "/^nameserver /d" /etc/resolv.conf
+ #for $nameserver in $name_servers
+echo "nameserver $nameserver" >>/etc/resolv.conf
+ #end for
+#end if
+
+echo '' > /tmp/network_log
+
+# get physical interfaces
+physical_interfaces=""
+for physical_interface in \$(ip -o link | cut -d: -f2 | grep -v lo); do
+ echo "processing physical interface \${physical_interface}" >> /tmp/network_log
+ if [ -z "\${physical_interfaces}" ]; then
+ physical_interfaces="\${physical_interface}"
+ else
+ physical_interfaces="\${physical_interfaces} \${physical_interface}"
+ fi
+ eval "physical_interface_\${physical_interface}=\${physical_interface}"
+done
+echo "physical interfaces: \${physical_interfaces}" >> /tmp/network_log
+
+# map physical interface to mac address
+mac_names=""
+for physical_interface in \${physical_interfaces}; do
+ set \$(ip link show \${physical_interface})
+#if $osversion == "trusty"
+ mac=\$(echo \$@ | cut -d' ' -f17)
+#else
+ mac=\$(echo \$@ | cut -d' ' -f13)
+#end if
+ mac_name=\$(echo \${mac} |tr 'a-z' 'A-Z' | tr ':' '_')
+ if [ -z "\${mac_name}" ]; then
+ mac_names="\${mac_name}"
+ else
+ mac_names="\${mac_names} \${mac_name}"
+ fi
+ echo "mapping physical interface \${physical_interface} to mac \${mac}" >> /tmp/network_log
+ eval "physical_interface_mac_\${physical_interface}=\$mac"
+ eval "physical_mac_interface_\${mac_name}=\${physical_interface}"
+ eval "mac_name_\${mac_name}=\$mac"
+done
+
+echo "list physical interfaces to mac" >> /tmp/network_log
+for physical_interface in \${physical_interfaces}; do
+ eval "mac=\\${physical_interface_mac_\${physical_interface}}"
+ echo "physical interface to mac: \${physical_interface} => \${mac}" >> /tmp/network_log
+done
+
+echo "list mac to physical interface mapping" >> /tmp/network_log
+for mac_name in \${mac_names}; do
+ eval "mac=\\${mac_name_\${mac_name}}"
+ eval "physical_interface=\\${physical_mac_interface_\${mac_name}}"
+ echo "mac to physical interface: \${mac} => \${physical_interface}" >> /tmp/network_log
+done
+
+logical_interfaces=""
+#set ikeys = $interfaces.keys()
+#import re
+#set $vlanpattern = $re.compile("([a-zA-Z0-9]+)[\.][0-9]+")
+#set $subinterfacepattern = $re.compile("([a-zA-Z0-9]+)[:][0-9]+")
+#set $numbondingdevs = 0
+#for $iname in $ikeys
+ #set $idata = $interfaces[$iname]
+ #set $mac = $idata.get("mac_address", "").upper()
+ #set $interface_type = $idata.get("interface_type", "").lower()
+ #if $interface_type in ("master","bond","bonded_bridge_slave")
+ #set $numbondingdevs += 1
+ #end if
+ #if $interface_type in ("master","bond","bridge","bonded_bridge_slave")
+ #continue
+ #end if
+ #if $vlanpattern.match($iname)
+ #set $interface_matched = $vlanpattern.match($iname)
+ #set $interface_name = $interface_matched.group(1)
+logical_interface=${interface_name}
+ #elif $subinterfacepattern.match($iname)
+ #set $interface_matched = $subinterfacepattern.match($iname)
+ #set $interface_name = $interface_matched.group(1)
+logical_interface=${interface_name}
+ #else
+logical_interface=$iname
+ #end if
+if [ -z "\${logical_interfaces}" ]; then
+ logical_interfaces="\${logical_interface}"
+else
+ logical_interfaces="\${logical_interfaces} \${logical_interface}"
+fi
+eval "logical_interface_\${logical_interface}=\${logical_interface}"
+ #if $mac != ""
+ #set mac_name = $mac.replace(':', '_')
+physical_interface=\${physical_mac_interface_${mac_name}}
+eval "logical_interface_mapping_\${logical_interface}=\${physical_interface}"
+if [ ! -z "\${physical_interface}" ]; then
+ eval "physical_interface_mapping_\${physical_interface}=\${logical_interface}"
+fi
+ #else
+eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
+if [ -z "\${physical_interface}" ]; then
+ eval "logical_interface_mapping_\${logical_interface}="
+fi
+ #end if
+#end for
+
+echo "logical interfaces: \${logical_interfaces}" >> /tmp/network_log
+
+echo "finish mapping logical interfaces in network config to physical interfaces" >> /tmp/network_log
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
+done
+for key in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${key}}"
+ echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
+done
+
+# map unmapped logical interface to the same name physical interface
+echo "mapping unmapped logical interfaces to the same name physical interfaces" >> /tmp/network_log
+for logical_interface in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
+ if [ ! -z "\${physical_interface}" ]; then
+ echo "ignore logical interface \${logical_interface} where its physical interface is \${physical_interface}" >> /tmp/network_log
+ continue
+ fi
+ # check if the same name physical interface is mapped
+ eval "mapped_logical_interface=\\${physical_interface_mapping_\${logical_interface}}"
+ if [ ! -z "\${mapped_logical_interface}" ]; then
+ echo "ignore logical interface \${logical_interface} since the same name physical interface is mapped by logical interface \${mapped_logical_interface}" >> /tmp/network_log
+ continue
+ fi
+ # check if the same name physical interface exists
+ eval "mapped_logical_interface=\\${physical_interface_\${logical_interface}}"
+ if [ -z "\${mapped_logical_interface}" ]; then
+ echo "ignore logical interface \${logical_interface} since the same name physical interface does not exist" >> /tmp/network_log
+ continue
+ fi
+ eval "logical_interface_mapping_\${logical_interface}=\${logical_interface}"
+ eval "physical_interface_mapping_\${logical_interface}=\${logical_interface}"
+ echo "set logical interface \${logical_interface} to the same physical interface" >> /tmp/network_log
+done
+
+echo "finish mapping unmapped logical interfaces in network config to the same name physical interfaces" >> /tmp/network_log
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
+done
+for key in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${key}}"
+ echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
+done
+
+
+unset_physical_interfaces=""
+echo "get unset physical interfaces from \${physical_interfaces}" >> /tmp/network_log
+for physical_interface in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${physical_interface}}"
+ if [ ! -z "\${logical_interface}" ]; then
+ echo "physical interface \${physical_interface} is already set to \${logical_interface}" >> /tmp/network_log
+ continue
+ fi
+ if [ -z "\${unset_physical_interfaces}" ]; then
+ unset_physical_interfaces="\${physical_interface}"
+ else
+ unset_physical_interfaces="\${unset_physical_interfaces} \${physical_interface}"
+ fi
+ eval "unset_physical_interface_\${physical_interface}=\${physical_interface}"
+done
+echo "unset physical interfaces \${unset_physical_interfaces}" >> /tmp/network_log
+
+unset_logical_interfaces=""
+echo "get unset logical interfaces from \${logical_interfaces}" >> /tmp/network_log
+for logical_interface in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
+ if [ ! -z "\${physical_interface}" ]; then
+ echo "logical interface \${logical_interface} is already set to \${physical_interface}" >> /tmp/network_log
+ continue
+ fi
+ if [ -z "\${unset_logical_interfaces}" ]; then
+ unset_logical_interfaces="\${logical_interface}"
+ else
+ unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
+ fi
+done
+echo "unset logical interfaces \${unset_logical_interfaces}" >> /tmp/network_log
+
+sorted_unset_physical_interfaces=\$(printf '%s\n' \${unset_physical_interfaces} | sort | xargs)
+echo "sorted unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
+sorted_unset_logical_interfaces=\$(printf '%s\n' \${unset_logical_interfaces} | sort | xargs)
+echo "sorted unset logical interfaces \${sorted_unset_logical_interfaces}" >> /tmp/network_log
+
+# map unset logical interface to unset physical interface
+echo "map unset logical interfaces \${sorted_unset_logical_interfaces} to unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
+unset_logical_interfaces=""
+for logical_interface in \${sorted_unset_logical_interfaces}; do
+ set \${sorted_unset_physical_interfaces}
+ physical_interface_num=\$#;
+ if [ \${physical_interface_num} -gt 0 ]; then
+ physical_interface=\$1
+ shift 1
+ sorted_unset_physical_interfaces="\$@"
+ echo "map unset logical interface \${logical_interface} to unset physical interface \${physical_interface}" >> /tmp/network_log
+ eval "physical_interface_mapping_\${physical_interface}=\${logical_interface}"
+ eval "logical_interface_mapping_\${logical_interface}=\${physical_interface}"
+ else
+ echo "remain unset logical interface \${logical_interface} since there is no remain unset physical interfaces" >> /tmp/network_log
+ if [ -z "\${unset_logical_interfaces}" ]; then
+ unset_logical_interfaces="\${logical_interface}"
+ else
+ unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
+ fi
+ fi
+done
+sorted_unset_logical_interfaces=\${unset_logical_interfaces}
+unset_physical_interfaces=\${sorted_unset_physical_interfaces}
+
+echo "finish mapping unmapped logical interfaces in network config to unmapped physical interfaces" >> /tmp/network_log
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
+done
+for key in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${key}}"
+ echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
+done
+
+echo "unset physical interfaces \${sorted_unset_physical_interfaces}" >> /tmp/network_log
+echo "unset logical interfaces \${sorted_unset_logical_interfaces}" >> /tmp/network_log
+
+# map remaining unmapped logical interfaces
+echo "map remaining unmapped logical interfaces" >> /tmp/network_log
+if [ ! -z "\${sorted_unset_logical_interfaces}" ]; then
+ # get all available logical interfaces which the same name physical interface is not used
+ available_logical_interfaces=""
+ for logical_interface in \${logical_interfaces}; do
+ eval "mapped_logical_interface=\\${physical_interface_mapping_\${logical_interface}}"
+ if [ -z "\${mapped_logical_interface}" ]; then
+ eval "available_logical_interface_\${logical_interface}=\${logical_interface}"
+ if [ -z "\${available_logical_interfaces}" ]; then
+ available_logical_interfaces="\${logical_interface}"
+ else
+ available_logical_interfaces="\${available_logical_interfaces} \${logical_interface}"
+ fi
+ else
+ echo "ignore logical interface \${logical_interface} since the same name physical interface mapped to logical interface \${mapped_logical_interface}" >> /tmp/network_log
+ fi
+ done
+
+ # add extra logical interfaces name to physical interfaces
+ if [ -z "\${physical_interfaces}" ]; then
+ physical_interfaces="\${available_logical_interfaces}"
+ else
+ physical_interfaces="\${physical_interfaces} \${available_logical_interfaces}"
+ fi
+ echo "updated physical interfaces: \${physical_interfaces}" >> /tmp/network_log
+
+ #first map logical interface to the same name physical interface if that physical interface name is not used
+ unset_logical_interfaces=""
+ for logical_interface in \${sorted_unset_logical_interfaces}; do
+ eval "available_logical_interface=\\${available_logical_interface_\${logical_interface}}"
+ if [ ! -z "\${available_logical_interface}" ]; then
+ eval "physical_interface_mapping_\${available_logical_interface}=\${logical_interface}"
+ eval "logical_interface_mapping_\${logical_interface}=\${available_logical_interface}"
+ else
+ if [ -z "\${unset_logical_interfaces}" ]; then
+ unset_logical_interfaces="\${logical_interface}"
+ else
+ unset_logical_interfaces="\${unset_logical_interfaces} \${logical_interface}"
+ fi
+ fi
+ done
+ sorted_unset_logical_interfaces=\${unset_logical_interfaces}
+
+ # map remain unset logical interfaces to available logical interface names
+ for logical_interface in \${sorted_unset_logical_interfaces}; do
+ for available_logical_interface in \${available_logical_interfaces}; do
+ eval "mapped_logical_interface=\\${physical_interface_mapping_\${available_logical_interface}}"
+ if [ -z "\${mapped_logical_interface}" ]; then
+ eval "physical_interface_mapping_\${available_logical_interface}=\${logical_interface}"
+ eval "logical_interface_mapping_\${logical_interface}=\${available_logical_interface}"
+ break
+ fi
+ done
+ done
+fi
+unset_logical_interfaces=""
+sorted_unset_logical_interfaces=""
+
+echo "finish mapping ramaining unmapped logical interfaces" >> /tmp/network_log
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
+done
+for key in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${key}}"
+ echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
+done
+
+# map remaining unmapped physical interfaces
+echo "map remaining unmapped physical interfaces" >> /tmp/network_log
+if [ ! -z "\${sorted_unset_physical_interfaces}" ]; then
+ # get all available physical interfaces which the same name logical interface is not used
+ available_physical_interfaces=""
+ for physical_interface in \${physical_interfaces}; do
+ eval "mapped_physical_interface=\\${logical_interface_mapping_\${physical_interface}}"
+ if [ -z "\${mapped_physical_interface}" ]; then
+ eval "available_physical_interface_\${physical_interface}=\${physical_interface}"
+ if [ -z "\${available_physical_interfaces}" ]; then
+ available_physical_interfaces="\${physical_interface}"
+ else
+ available_physical_interfaces="\${available_physical_interfaces} \${physical_interface}"
+ fi
+ else
+ echo "ignore physical interface \${physical_interface} since the same name logical interface mapped to physical interface \${mapped_physical_interface}" >> /tmp/network_log
+ fi
+ done
+
+ # add extra physical interfaces name to logical interfaces
+ if [ -z "\${logical_interfaces}" ]; then
+ logical_interfaces="\${available_physical_interfaces}"
+ else
+ logical_interfaces="\${logical_interfaces} \${available_physical_interfaces}"
+ fi
+ echo "updated logical interfaces: \${logical_interfaces}" >> /tmp/network_log
+
+ #first map physical interface to the same name logical interface if that logical interface name is not used
+ unset_physical_interfaces=""
+ for physical_interface in \${sorted_unset_physical_interfaces}; do
+ eval "available_physical_interface=\\${available_physical_interface_\${physical_interface}}"
+ if [ ! -z "\${available_physical_interface}" ]; then
+ eval "logical_interface_mapping_\${available_physical_interface}=\${physical_interface}"
+ eval "physical_interface_mapping_\${physical_interface}=\${available_physical_interface}"
+ else
+ if [ -z "\${unset_physical_interfaces}" ]; then
+ unset_physical_interfaces="\${physical_interface}"
+ else
+ unset_physical_interfaces="\${unset_physical_interfaces} \${physical_interface}"
+ fi
+ fi
+ done
+ sorted_unset_physical_interfaces=\${unset_physical_interfaces}
+
+ # map remain unset physical interfaces to logical interface name as available physical interface names
+ for physical_interface in \${sorted_unset_physical_interfaces}; do
+ for available_physical_interface in \${available_physical_interfaces}; do
+ eval "mapped_physical_interface=\\${logical_interface_mapping_\${available_physical_interface}}"
+ if [ -z "\${mapped_physical_interface}" ]; then
+ eval "logical_interface_mapping_\${available_physical_interface}=\${physical_interface}"
+ eval "physical_interface_mapping_\${physical_interface}=\${available_physical_interface}"
+ break
+ fi
+ done
+ done
+fi
+unset_physical_interfaces=""
+sorted_unset_physical_interfaces=""
+
+echo "finish mapping ramaining unmapped physical interfaces" >> /tmp/network_log
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ echo "map logical interface \${key} to physical interface \${physical_interface}" >> /tmp/network_log
+done
+for key in \${physical_interfaces}; do
+ eval "logical_interface=\\${physical_interface_mapping_\${key}}"
+ echo "map physical interface \${key} to logical interface \${logical_interface}" >> /tmp/network_log
+done
+
+for key in \${logical_interfaces}; do
+ eval "physical_interface=\\${logical_interface_mapping_\${key}}"
+ if [ ! -z "\${physical_interface}" ]; then
+ eval "physical_mac=\\${physical_interface_mac_\${physical_interface}}"
+ else
+ physical_mac=""
+ fi
+ if [ ! -z "\${physical_mac}" ]; then
+ physical_mac=\$(echo \${physical_mac} | tr 'A-Z' 'a-z')
+ echo "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"\${physical_mac}\", ATTR{type}==\"1\", KERNEL==\"eth*\", NAME=\"\$key\"" >> /etc/udev/rules.d/70-persistent-net.rules.new
+ echo "add network interface \$key mac \${physical_mac} into udev rules" >> /tmp/network_log
+ else
+ echo "network interface \$key does not find mac address to add to udev rules" >> /tmp/network_log
+ fi
+done
+
+#if $numbondingdevs > 0
+# we have bonded interfaces, so set max_bonds
+if [ -f "/etc/modprobe.conf" ]; then
+ echo "options bonding max_bonds=$numbondingdevs" >> /etc/modprobe.conf
+fi
+#end if
+
+## =============================================================================
+## Rewrite the interfaces file and make sure we preserve the loopback device
+echo "auto lo" > /etc/network/interfaces
+echo " iface lo inet loopback" >> /etc/network/interfaces
+echo "" >> /etc/network/interfaces
+
+#set $nameserver_set = 0
+
+#for $iname in $ikeys
+ #set $idata = $interfaces[$iname]
+ #set $mac = $idata.get("mac_address", "").upper()
+ #set $iface_type = $idata.get("interface_type", "").lower()
+ #set $mtu = $idata.get("mtu", "")
+ #set $static = $idata.get("static", "")
+ #set $management = $idata.get("management", "")
+ #set $ip = $idata.get("ip_address", "")
+ #set $netmask = $idata.get("netmask", "")
+ #set $if_gateway = $idata.get("if_gateway", "")
+ #set $static_routes = $idata.get("static_routes", "")
+ #set $iface_master = $idata.get("interface_master", "")
+ #set $bonding_opts = $idata.get("bonding_opts", "")
+ #set $bridge_opts = $idata.get("bridge_opts", "")
+
+used_logical_interface_$iname=$iname
+
+ #if $iface_type in ("slave","bond_slave","bridge_slave","bonded_bridge_slave")
+ #set $static = 1
+ #end if
+echo "auto $iname" >> /etc/network/interfaces
+
+ #if $static
+echo "iface $iname inet static" >> /etc/network/interfaces
+ #else
+echo "iface $iname inet dhcp" >> /etc/network/interfaces
+ #end if
+
+ #if $iface_type not in ("master","bond","bridge","bonded_bridge_slave")
+ #if $vlanpattern.match($iname)
+ #pass
+ #else
+ #set $interface_matched = $subinterfacepattern.match($iname)
+ #if $interface_matched
+ #set $interface_name = $interface_matched.group(1)
+logical_interface=$interface_name
+ #else
+logical_interface=$iname
+ #end if
+eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
+if [ ! -z "\${physical_interface}" ]; then
+ eval "physical_mac=\\${physical_interface_mac_\${physical_interface}}"
+fi
+if [ ! -z "\${physical_mac}" ]; then
+ echo " hwaddress ether \${physical_mac}" >> /etc/network/interfaces
+fi
+ #if not $subinterfacepattern.match($iname)
+if [ -f "/etc/modprobe.conf" ] && [ ! -z "\${physical_interface}" ]; then
+ grep \${physical_interface} /etc/modprobe.conf | sed "s/\${physical_interface}/$iname/" >> /etc/modprobe.conf.cobbler
+ grep -v \${physical_interface} /etc/modprobe.conf >> /etc/modprobe.conf.new
+ rm -f /etc/modprobe.conf
+ mv /etc/modprobe.conf.new /etc/modprobe.conf
+fi
+ #end if
+ #end if
+ #end if
+
+ #if $iface_type in ("master","bond","bonded_bridge_slave")
+ ## if this is a bonded interface, configure it in modprobe.conf
+if [ -f "/etc/modprobe.conf" ]; then
+ #if $osversion == "rhel4"
+ echo "install $iname /sbin/modprobe bonding -o $iname $bonding_opts" >> /etc/modprobe.conf.cobbler
+ #else
+ echo "alias $iname bonding" >> /etc/modprobe.conf.cobbler
+ #end if
+fi
+ #set $bondslaves = ""
+ #for $bondiname in $ikeys
+ #set $bondidata = $interfaces[$bondiname]
+ #set $bondiface_type = $bondidata.get("interface_type", "").lower()
+ #set $bondiface_master = $bondidata.get("interface_master", "")
+ #if $bondiface_master == $iname
+ #set $bondslaves += $bondiname + " "
+ #end if
+ #end for
+echo " bond-slaves $bondslaves" >> /etc/network/interfaces
+
+ #if $bonding_opts != ""
+ #for $bondopts in $bonding_opts.split(" ")
+ #set [$bondkey, $bondvalue] = $bondopts.split("=")
+echo " bond-$bondkey $bondvalue" >> /etc/network/interfaces
+ #end for
+ #end if
+ #elif $iface_type in ("slave","bond_slave") and $iface_master != ""
+echo " bond-master $iface_master" >> /etc/network/interfaces
+ #end if
+
+ #if $iface_type == "bridge"
+ #set $bridgeslaves = ""
+ #for $bridgeiname in $ikeys
+ #set $bridgeidata = $interfaces[$bridgeiname]
+ #set $bridgeiface_type = $bridgeidata.get("interface_type", "").lower()
+ #set $bridgeiface_master = $bridgeidata.get("interface_master", "")
+ #if $bridgeiface_master == $iname
+ #set $bridgeslaves += $bridgeiname + " "
+ #end if
+ #end for
+echo " bridge_ports $bridgeslaves" >> /etc/network/interfaces
+ #if $bridge_opts != ""
+ #for $bridgeopts in $bridge_opts.split(" ")
+ #set [$bridgekey, $bridgevalue] = $bridgeopts.split("=")
+echo " bridge_$bridgekey $bridgevalue" >> /etc/network/interfaces
+ #end for
+ #end if
+ #elif $iface_type in ["bridge_slave", "bonded_bridge_slave"] and $iface_master != ""
+ #pass
+ #end if
+
+ #if $static
+ #if $iname in $promisc_interfaces
+echo " address 0.0.0.0" >> /etc/network/interfaces
+echo " up ip link set $iname up" >> /etc/network/interfaces
+echo " up ip link set $iname promisc on" >> /etc/network/interfaces
+echo " down ip link set $iname promisc off" >> /etc/network/interfaces
+echo " down ip link set $iname down" >> /etc/network/interfaces
+ #elif $ip != ""
+echo " address $ip" >> /etc/network/interfaces
+ #if $netmask == ""
+ ## Default to 255.255.255.0?
+ #set $netmask = "255.255.255.0"
+ #end if
+echo " netmask $netmask" >> /etc/network/interfaces
+ #import netaddr
+ #set interface_network = $netaddr.IPNetwork('%s/%s' % ($ip, $netmask))
+ #set interface_network_str = $str($interface_network)
+ #if $if_gateway != ""
+echo " gateway $if_gateway" >> /etc/network/interfaces
+ #elif $gateway != ""
+ #set gateway_address = $netaddr.IPAddress($gateway)
+ #if $gateway_address in $interface_network
+echo " gateway $gateway" >> /etc/network/interfaces
+ #end if
+ #end if
+ #end if
+ #else
+ #pass
+ #end if
+
+ #if $mtu != ""
+echo " mtu $mtu" >> /etc/network/interfaces
+ #end if
+
+ #if not $nameserver_set
+ #if $iface_type not in ("slave","bond_slave","bridge_slave","bonded_bridge_slave")
+ #set $nameservers = ' '.join($name_servers)
+ #set $nameserver_search = ' '.join($name_servers_search)
+ #if $nameservers != ""
+echo " dns-nameservers $nameservers" >> /etc/network/interfaces
+ #end if
+ #if $nameserver_search != ""
+echo " dns-search $nameserver_search" >> /etc/network/interfaces
+ #end if
+ #set $nameserver_set = 1
+ #end if
+ #end if
+
+ #for $route in $static_routes
+ #set routepattern = $re.compile("[0-9/.]+:[0-9.]+")
+ #if $routepattern.match($route)
+ #set [$network, $router] = $route.split(":")
+echo " up ip route add $network via $router dev $iname" >> /etc/network/interfaces
+ #else
+echo " # Warning: invalid route: $route" >> /etc/network/interfaces
+ #end if
+ #end for
+
+echo "" >> /etc/network/interfaces
+#end for
+
+for logical_interface in \${logical_interfaces}; do
+ eval "used_logical_interface=\\${used_logical_interface_\${logical_interface}}"
+ if [ ! -z "\${used_logical_interface}" ]; then
+ # ignore logical interface that is already generated in above
+ echo "ignore used logical interface \${logical_interface}" >> /tmp/network_log
+ continue
+ fi
+ echo "add logical interface \${logical_interface} into network config since it is not set above" >> /tmp/network_log
+ eval "physical_interface=\\${logical_interface_mapping_\${logical_interface}}"
+ if [ ! -z "\${physical_interface}" ]; then
+ echo "auto \${logical_interface}" >> /etc/network/interfaces
+ echo "iface \${logical_interface} inet static" >> /etc/network/interfaces
+ eval "mac=\\${physical_interface_mac_\${physical_interface}}"
+ if [ ! -z "\$mac" ]; then
+ echo " hwaddress ether \${mac}" >> /etc/network/interfaces
+ fi
+ echo "" >> /etc/network/interfaces
+ if [ -f "/etc/modprobe.conf" ] && [ ! -z "\${physical_interface}" ]; then
+ grep \${physical_interface} /etc/modprobe.conf | sed "s/\${physical_interface}/\${logical_interface}/" >> /etc/modprobe.conf.cobbler
+ grep -v \${physical_interface} /etc/modprobe.conf >> /etc/modprobe.conf.new
+ rm -f /etc/modprobe.conf
+ mv /etc/modprobe.conf.new /etc/modprobe.conf
+ fi
+ fi
+done
+
+if [ -f "/etc/modprobe.conf" ]; then
+ cat /etc/modprobe.conf.cobbler >> /etc/modprobe.conf
+ rm -f /etc/modprobe.conf.cobbler
+fi
+if [ -f "/etc/udev/rules.d/70-persistent-net.rules" ]; then
+ rm -f /etc/udev/rules.d/70-persistent-net.rules
+fi
+if [ -f "/etc/udev/rules.d/70-persistent-net.rules.new" ]; then
+ mv /etc/udev/rules.d/70-persistent-net.rules.new /etc/udev/rules.d/70-persistent-net.rules
+fi
+## End post_install_network_config generated code
diff --git a/deploy/adapters/cobbler/snippets/preseed_post_partition_disks b/deploy/adapters/cobbler/snippets/preseed_post_partition_disks
index ed058c73..4770e2af 100644
--- a/deploy/adapters/cobbler/snippets/preseed_post_partition_disks
+++ b/deploy/adapters/cobbler/snippets/preseed_post_partition_disks
@@ -1,39 +1,39 @@
-partitions=\$(pvs --noheadings --separator :| cut -d: -f1,2)
-vg_remove=0
-remove_partitions=''
-echo "partitions \$partitions" >> /tmp/post_partition.log
-
-for partition in \$partitions; do
- set \$(echo \$partition | tr ':' ' ')
- partition=\$1
- vg=\$2
- if [ "\$vg" = "reserved" ]; then
- echo "prepare remove partition \$partition" >> /tmp/post_partition.log
- remove_partitions="\${remove_partitions} \$partition"
- vg_remove=1
- else
- echo "ignore \$vg since it is not reserved" >> /tmp/post_partition.log
- fi
-done
-
-if [ "\${vg_remove}" != "0" ]; then
- vgremove -f reserved
-fi
-
-for remove_partition in \${remove_partitions}; do
- echo "remove pv \${remove_partition}" >> /tmp/post_partition.log
- pvremove -ff -y \${remove_partition}
- set \$(echo \${remove_partition} | sed -e 's/^\(.*\)\([0-9]\+\)\$/\1 \2/g')
- partition_disk=\$1
- partition_number=\$2
- if [ ! -z "\${partition_disk}" ]; then
- if [ ! -z "\${partition_number}" ]; then
- echo "remove partition \${remove_partition} on \${partition_disk} number \${partition_number}" >> /tmp/post_partition.log
- parted \${partition_disk} --script -- rm \${partition_number}
- else
- echo "no partition number found for \${remove_partition}" >> /tmp/post_partition.log
- fi
- else
- echo "no partition disk found for \${remove_partition}" >> /tmp/post_partition.log
- fi
-done
+partitions=\$(pvs --noheadings --separator :| cut -d: -f1,2)
+vg_remove=0
+remove_partitions=''
+echo "partitions \$partitions" >> /tmp/post_partition.log
+
+for partition in \$partitions; do
+ set \$(echo \$partition | tr ':' ' ')
+ partition=\$1
+ vg=\$2
+ if [ "\$vg" = "reserved" ]; then
+ echo "prepare remove partition \$partition" >> /tmp/post_partition.log
+ remove_partitions="\${remove_partitions} \$partition"
+ vg_remove=1
+ else
+ echo "ignore \$vg since it is not reserved" >> /tmp/post_partition.log
+ fi
+done
+
+if [ "\${vg_remove}" != "0" ]; then
+ vgremove -f reserved
+fi
+
+for remove_partition in \${remove_partitions}; do
+ echo "remove pv \${remove_partition}" >> /tmp/post_partition.log
+ pvremove -ff -y \${remove_partition}
+ set \$(echo \${remove_partition} | sed -e 's/^\(.*\)\([0-9]\+\)\$/\1 \2/g')
+ partition_disk=\$1
+ partition_number=\$2
+ if [ ! -z "\${partition_disk}" ]; then
+ if [ ! -z "\${partition_number}" ]; then
+ echo "remove partition \${remove_partition} on \${partition_disk} number \${partition_number}" >> /tmp/post_partition.log
+ parted \${partition_disk} --script -- rm \${partition_number}
+ else
+ echo "no partition number found for \${remove_partition}" >> /tmp/post_partition.log
+ fi
+ else
+ echo "no partition disk found for \${remove_partition}" >> /tmp/post_partition.log
+ fi
+done
diff --git a/deploy/adapters/cobbler/snippets/preseed_pre_anamon b/deploy/adapters/cobbler/snippets/preseed_pre_anamon
index 01091c60..aeda8e22 100644
--- a/deploy/adapters/cobbler/snippets/preseed_pre_anamon
+++ b/deploy/adapters/cobbler/snippets/preseed_pre_anamon
@@ -1,4 +1,4 @@
-#if $str($getVar('anamon_enabled','')) == "1"
-wget -O /tmp/anamon "http://$server:$http_port/cobbler/aux/anamon"
-## python /tmp/anamon --name "$name" --watchfiles "/var/log/syslog /var/log/partman /var/log/hareware_summary /var/log/status /tmp/preseed.log" --server "$server" --port "$http_port"
-#end if
+#if $str($getVar('anamon_enabled','')) == "1"
+wget -O /tmp/anamon "http://$server:$http_port/cobbler/aux/anamon"
+## python /tmp/anamon --name "$name" --watchfiles "/var/log/syslog /var/log/partman /var/log/hareware_summary /var/log/status /tmp/preseed.log" --server "$server" --port "$http_port"
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_pre_install_network_config b/deploy/adapters/cobbler/snippets/preseed_pre_install_network_config
index ef210a0b..2ea74799 100644
--- a/deploy/adapters/cobbler/snippets/preseed_pre_install_network_config
+++ b/deploy/adapters/cobbler/snippets/preseed_pre_install_network_config
@@ -1,75 +1,75 @@
-#if $getVar("system_name","") != ""
- #if $getVar('management_nic', '') == ""
- #set $management_nic=''
- #end if
-echo "generate pre network config" > /tmp/network_log
-# Start pre_install_network_config generated code
-#raw
-# generic functions to be used later for discovering NICs
-mac_exists() {
- if type ip; then
- ip -o link | grep -i "$1" 2>/dev/null >/dev/null
- return $?
- elif type esxcfg-nics; then
- esxcfg-nics -l | grep -i "$1" 2>/dev/null >/dev/null
- return $?
- else
- ifconfig -a | grep -i "$1" 2>/dev/null >/dev/null
- return $?
- fi
-}
-get_ifname() {
- if type ip; then
- IFNAME=$(ip -o link | grep -i "$1" | sed -e 's/^[0-9]*: //' -e 's/:.*//')
- elif type esxcfg-nics; then
- IFNAME=$(esxcfg-nics -l | grep -i "$1" | cut -d " " -f 1)
- else
- IFNAME=$(ifconfig -a | grep -i "$1" | cut -d " " -f 1)
- if [ -z "$IFNAME" ]; then
- IFNAME=$(ifconfig -a | grep -i -B 2 "$1" | sed -n '/flags/s/:.*$//p')
- fi
- fi
-}
-#end raw
- #set ikeys = $interfaces.keys()
- #for $iname in $ikeys
- #set $idata = $interfaces[$iname]
- #set $management = $idata["management"]
- #if $management
- #set $management_nic = $iname
- #end if
- #end for
- #for $iname in $ikeys
- #set $idata = $interfaces[$iname]
- #set $mac = $idata["mac_address"]
- #set $static = $idata["static"]
- #set $management = $idata["management"]
- #set $ip = $idata["ip_address"]
- #set $netmask = $idata["netmask"]
- #set $iface_type = $idata["interface_type"]
- #set $iface_master = $idata["interface_master"]
- #set $static_routes = $idata["static_routes"]
- #if $management_nic != ''
- #if $iname != $management_nic
- #continue
- #end if
- #end if
- #if $mac == ""
- #continue
- #end if
-# Configuring $iname ($mac)
-if mac_exists $mac; then
- get_ifname $mac
- echo "d-i netcfg/choose_interface string \$IFNAME" >> /tmp/pre_install_network_config
- #if $static and $ip != ""
- echo "d-i netcfg/get_ipaddress string $ip" >> /tmp/pre_install_network_config
- #if $netmask == ""
- #set $netmask = "255.255.255.0"
- #end if
- echo "d-i netcfg/get_netmask string $netmask" >> /tmp/pre_install_network_config
- #else
- #continue
- #end if
-fi
- #end for
-#end if
+#if $getVar("system_name","") != ""
+ #if $getVar('management_nic', '') == ""
+ #set $management_nic=''
+ #end if
+echo "generate pre network config" > /tmp/network_log
+# Start pre_install_network_config generated code
+#raw
+# generic functions to be used later for discovering NICs
+mac_exists() {
+ if type ip; then
+ ip -o link | grep -i "$1" 2>/dev/null >/dev/null
+ return $?
+ elif type esxcfg-nics; then
+ esxcfg-nics -l | grep -i "$1" 2>/dev/null >/dev/null
+ return $?
+ else
+ ifconfig -a | grep -i "$1" 2>/dev/null >/dev/null
+ return $?
+ fi
+}
+get_ifname() {
+ if type ip; then
+ IFNAME=$(ip -o link | grep -i "$1" | sed -e 's/^[0-9]*: //' -e 's/:.*//')
+ elif type esxcfg-nics; then
+ IFNAME=$(esxcfg-nics -l | grep -i "$1" | cut -d " " -f 1)
+ else
+ IFNAME=$(ifconfig -a | grep -i "$1" | cut -d " " -f 1)
+ if [ -z "$IFNAME" ]; then
+ IFNAME=$(ifconfig -a | grep -i -B 2 "$1" | sed -n '/flags/s/:.*$//p')
+ fi
+ fi
+}
+#end raw
+ #set ikeys = $interfaces.keys()
+ #for $iname in $ikeys
+ #set $idata = $interfaces[$iname]
+ #set $management = $idata["management"]
+ #if $management
+ #set $management_nic = $iname
+ #end if
+ #end for
+ #for $iname in $ikeys
+ #set $idata = $interfaces[$iname]
+ #set $mac = $idata["mac_address"]
+ #set $static = $idata["static"]
+ #set $management = $idata["management"]
+ #set $ip = $idata["ip_address"]
+ #set $netmask = $idata["netmask"]
+ #set $iface_type = $idata["interface_type"]
+ #set $iface_master = $idata["interface_master"]
+ #set $static_routes = $idata["static_routes"]
+ #if $management_nic != ''
+ #if $iname != $management_nic
+ #continue
+ #end if
+ #end if
+ #if $mac == ""
+ #continue
+ #end if
+# Configuring $iname ($mac)
+if mac_exists $mac; then
+ get_ifname $mac
+ echo "d-i netcfg/choose_interface string \$IFNAME" >> /tmp/pre_install_network_config
+ #if $static and $ip != ""
+ echo "d-i netcfg/get_ipaddress string $ip" >> /tmp/pre_install_network_config
+ #if $netmask == ""
+ #set $netmask = "255.255.255.0"
+ #end if
+ echo "d-i netcfg/get_netmask string $netmask" >> /tmp/pre_install_network_config
+ #else
+ #continue
+ #end if
+fi
+ #end for
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_pre_partition_disks b/deploy/adapters/cobbler/snippets/preseed_pre_partition_disks
index 7575b2aa..b31d8841 100644
--- a/deploy/adapters/cobbler/snippets/preseed_pre_partition_disks
+++ b/deploy/adapters/cobbler/snippets/preseed_pre_partition_disks
@@ -1,673 +1,673 @@
-#set hostname=$getVar('hostname',None)
-#set partition = $getVar('partition', None)
-#set partition_size = $getVar('partition_size', None)
-#set partition_maxsize = $getVar('partition_maxsize', None)
-#set disk_reserve_size = $getVar('disk_reserve_size', None)
-#set disk_max_size = $getVar('disk_max_size', None)
-#set default_disk_reserve_size = $getVar('default_disk_reserve_size', '0')
-#set default_disk_max_size = $getVar('default_disk_max_size', '0')
-
-#if $hostname == None
-#set $vgname = "VolGroup00"
-#else
-#set $vgname = $hostname.split('.')[0]
-#end if
-
-echo "partman early script" >> /tmp/preseed.log
-if [ -e /dev/disk/by-path ]; then
- set \$(ls -s -l /dev/disk/by-path | tr -s '\t' ' ' | cut -d' ' -f11,13)
- disk_mapping_nums=\$((\$#/2))
- disk_mapping_offset=0
- echo "disk_mapping_nums: \$disk_mapping_nums" >> /tmp/preseed.log
- echo "disk_mapping: \$@" >> /tmp/preseed.log
- disk_mapping=""
- disk_path_mapping=""
- while [ \$disk_mapping_offset -lt \$disk_mapping_nums ]; do
- found_disk_type=0
-#if $getVar('disk_type_only','') != ""
- if expr match "\$1" ".*-${disk_type_only}-.*"; then
- found_disk_type=1
- fi
-#else
- found_disk_type=1
-#end if
- path_name=\$(basename \$1)
- disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
- disk_name=\$(basename \$2)
- disk_mapping_offset=\$((\${disk_mapping_offset}+1))
- shift 2
-
- if [ \$found_disk_type -gt 0 ]; then
- if [ -z "\${disk_mapping}" ]; then
- disk_mapping="\${disk_name}"
- else
- disk_mapping="\${disk_mapping} \${disk_name}"
- fi
- if [ -z "\${disk_path_mapping}" ]; then
- disk_path_mapping="\${disk_path_name}"
- else
- disk_path_mapping="\${disk_path_mapping} \${disk_path_name}"
- fi
- eval "disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
- eval "disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
- eval "disk_path_\${disk_path_name}=/dev/\${disk_name}"
- eval "disk_path_\${disk_name}=/dev/\${disk_name}"
- else
- eval "ignore_disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
- eval "ignore_disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
- eval "ignore_disk_path_\${disk_path_name}=/dev/\${disk_name}"
- eval "ignore_disk_path_\${disk_name}=/dev/\${disk_name}"
- fi
- done
-
- for key in \${disk_mapping}; do
- eval "disk_path=\\${disk_\$key}"
- echo "disk_mapping \$key => \${disk_path}" >> /tmp/preseed.log
- done
-
- for key in \${disk_path_mapping}; do
- eval "disk=\\${disk_path_\$key}"
- echo "disk path mapping \$key => \${disk}" >> /tmp/preseed.log
- done
-else
- echo "/dev/disk/by-path does not exist" >> /tmp/preseed.log
-fi
-
-partition_disks=""
-disks=""
-for disk in \$(list-devices disk); do
- disk_name=\$(basename \$disk)
- eval "disk_path=\\${disk_\${disk_name}}"
- if [ -z "\${disk_path}" ]; then
- eval "ignore_disk_path=\\${ignore_disk_\${disk_name}}"
- if [ ! -z "\${ignore_disk_path}" ]; then
- echo "ignore disk \${disk_name} since it is not in disk_mapping" >> /tmp/preseed.log
- continue
- else
- echo "did not found disk path for \$disk but it is not ignored" >> /tmp/preseed.log
- eval "disk_\${disk_name}=/dev/\${disk_name}"
- eval "disk_path_\${disk_name}=/dev/\${disk_name}"
- fi
- fi
- found_disk=0
-
-#if $getVar('partitions_only','') != ""
- #for $partition_only in $partitions_only.split(',')
- #if not $partition_only
- #continue
- #end if
- if expr match "\${disk_name}" "$partition_only"; then
- found_disk=1
- else
- echo "disk \${disk_name} does not match $partition_only" >> /tmp/preseed.log
- fi
- #end for
-#else
- found_disk=1
-#end if
-
-#if $getVar('partition_by_path', '0') != "0"
- eval "disk=\\${disk_\${disk_name}}"
-#end if
-
- if [ \$found_disk -gt 0 ]; then
- echo "add disk \${disk} in partitioning list" >> /tmp/preseed.log
- if [ -z "\${partition_disks}" ]; then
- partition_disks="\${disk}"
- else
- partition_disks="\${partition_disks} \${disk}"
- fi
- fi
- if [ -z "\$disks" ]; then
- disks="\${disk}"
- else
- disks="\${disks} \${disk}"
- fi
-done
-echo "partition disks: \${partition_disks}" >> /tmp/preseed.log
-echo "disks \${disks}" >> /tmp/preseed.log
-
-#if $getVar('sort_disks', '0') != "0"
-sorted_disks=\$(printf '%s\n' \${partition_disks} | sort)
-#else
-sorted_disks=\${partition_disks}
-#end if
-echo "sorted disks \${sorted_disks}" >> /tmp/preseed.log
-
-#if $getVar('start_from_disk', '') != ""
- #set $start_from_disk = $int($start_from_disk)
- #if $start_from_disk > 0
- #set $disk_start_offset = $start_from_disk - 1
- #else
- #set $disk_start_offset = 0
- #end if
-set \${sorted_disks}
-shift $disk_start_offset
-sorted_disks=\$@
-echo "sorted disks begin from the $start_from_disk: \${sorted_disks}" >> /tmp/preseed.log
-#end if
-
-#if $getVar('disk_num', '') != ""
-set \${sorted_disks}
-sorted_disks=\$(printf '%s\n' \$@ | head -n${disk_num})
-echo "sorted disks for $disk_num disks: \${sorted_disks}" >> /tmp/preseed.log
-#end if
-
-first_disk=""
-for disk in \${sorted_disks}; do
- if [ -z "\${first_disk}" ]; then
- first_disk=\${disk}
- break
- fi
-done
-echo "first disk \${first_disk}" >> /tmp/preseed.log
-
-#if $getVar('keep_old_partitions', '0') != "0"
-for disk in \${sorted_disks}; do
- dd if=/dev/zero of=\${disk} bs=512 count=1
-done
-remove_disks=\${sorted_disks}
-#else
-for disk in \$disks; do
- dd if=/dev/zero of=\$disk bs=512 count=1
-done
-remove_disks=\${disks}
-#end if
-echo "remove disks \${remove_disks}" >> /tmp/preseed.log
-
-disk_partitions=\$(pvs --noheadings --separator :| cut -d: -f1)
-remove_partitions=""
-remove_vgs=""
-for disk_partition in \${disk_partitions}; do
- vg=\$(pvs --noheadings --separator : \${disk_partition} | cut -d: -f2)
- remove_vg=""
- remove_partition=""
- for remove_disk in \${remove_disks}; do
-#if $getVar('partition_by_path', '0') != "0"
- path_name=\$(basename \${remove_disk})
- disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
- remove_disk_path=\${remove_disk}
- eval "remove_disk=\\${disk_path_\${disk_path_name}}"
-#else
- disk_name=\$(basename \${remove_disk})
- eval "remove_disk_path=\\${disk_\${disk_name}}"
-#end if
- if [ -z "\${remove_disk}" ]; then
- continue
- fi
- if [ -z "\${remove_disk_path}" ]; then
- continue
- fi
- if expr match "\${disk_partition}" "\${remove_disk_path}.*"; then
- remove_vg="\$vg"
- remove_partition="\${disk_partition}"
- else
- echo "partition \${disk_partition} does not match \${remove_disk_path}.*" >> /tmp/preseed.log
- fi
- if expr match "\${disk_partition}" "\${remove_disk}.*"; then
- remove_vg="\$vg"
- remove_partition="\${disk_partition}"
- else
- echo "partition \${disk_partition} does not match \${remove_disk}.*" >> /tmp/preseed.log
- fi
- if [[ "\$vg" == "$vgname" ]]; then
- remove_vg="\$vg"
- remove_partition="\${disk_partition}"
- fi
- done
- if [ ! -z "\${remove_vg}" ]; then
- if [ -z "\${remove_vgs}" ]; then
- remove_vgs="\${remove_vg}"
- else
- vg_removed=0
- for vg in \${remove_vgs}; do
- if [[ "\$vg" == "\${remove_vg}" ]]; then
- vg_removed=1
- fi
- done
- if [ \${vg_removed} -eq 0 ]; then
- remove_vgs="\${remove_vgs} \${remove_vg}"
- fi
- fi
- fi
- if [ ! -z "\${remove_partition}" ]; then
- if [ -z "\${remove_partitions}" ]; then
- remove_partitions="\${remove_partition}"
- else
- pv_removed=0
- for pv in ${remove_partitions}; do
- if [[ "\$pv" == "\${remove_partition}" ]]; then
- pv_removed=1
- fi
- done
- if [ \${pv_removed} -eq 0 ]; then
- remove_partitions="\${remove_partitions} \${remove_partition}"
- fi
- fi
- fi
-done
-
-echo "remove vgs \${remove_vgs}" >> /tmp/preseed.log
-for remove_vg in \${remove_vgs}; do
- vgremove -f \${remove_vg}
-done
-
-echo "remove partitions \${remove_partitions} from \${remove_vgs}" >> /tmp/preseed.log
-for remove_partition in \${remove_partitions}; do
- pvremove -ff -y \${remove_partition}
-done
-
-echo "remove disks \${remove_disks}" >> /tmp/preseed.log
-
-partition_disks=""
-#if $getVar('keep_old_partitions', '0') != "0"
-for disk in \${sorted_disks}; do
-#else
-for disk in \${disks}; do
-#end if
- if [ -z "\${partition_disks}" ]; then
- partition_disks="\${disk}"
- else
- partition_disks="\${partition_disks} \${disk}"
- fi
-done
-
-partition_disks_str=\$(echo \${partition_disks} | tr ' ' ',')
-echo "d-i partman-auto/select_disks multiselect \${partition_disks_str}" >> /tmp/part-include
-echo "d-i partman-auto/disk string \${partition_disks}" >> /tmp/part-include
-echo "disks \${partition_disks}" >> /tmp/preseed.log
-
-default_partition=$getVar('default_partition', '/')
-partition_fstype=$getVar('partition_fstype', 'ext3')
-
-echo "default partition \${default_partition}" >> /tmp/preseed.log
-echo "partition fstype \${partition_fstype}" >> /tmp/preseed.log
-
-#if $disk_reserve_size != None
- #set disk_sizes = [disk_size.strip() for disk_size in $disk_reserve_size.split(';') if disk_size.strip()]
- #for disk_and_size in $disk_sizes
- #set disk_name, size = $disk_and_size.split(' ', 1)
- #set disk_name = $disk_name.strip()
- #if $size.endswith('K')
- #set disk_size = $int($size[:-1]) / 1000
- #elif $size.endswith('M')
- #set disk_size = $int($size[:-1])
- #elif $size.endswith('G')
- #set disk_size = $int($size[:-1]) * 1000
- #elif $size.endswith('T')
- #set disk_size = $int($size[:-1]) * 1000000
- #else
- #set disk_size = $int($size)
- #end if
-reserve_disk_size_${disk_name}=${disk_size}
- #end for
-#end if
-
-#if $default_disk_reserve_size.endswith('K')
- #set disk_size = $int($default_disk_reserve_size[:-1]) / 1000
-#elif $default_disk_reserve_size.endswith('M')
- #set disk_size = $int($default_disk_reserve_size[:-1])
-#elif $default_disk_reserve_size.endswith('G')
- #set disk_size = $int($default_disk_reserve_size[:-1]) * 1000
-#elif $default_disk_reserve_size.endswith('T')
- #set disk_size = $int($default_disk_reserve_size[:-1]) * 1000000
-#else
- #set disk_size = $int($default_disk_reserve_size)
-#end if
-default_reserve_disk_size=${disk_size}
-
-#if $disk_max_size != None
- #set disk_sizes = [disk_size.strip() for disk_size in $disk_max_size.split(';') if disk_size.strip()]
- #for disk_and_size in $disk_sizes
- #set disk_name, size = $disk_and_size.split(' ', 1)
- #set disk_name = $disk_name.strip()
- #if $size.endswith('K')
- #set disk_size = $int($size[:-1]) / 1000
- #elif $size.endswith('M')
- #set disk_size = $int($size[:-1])
- #elif $size.endswith('G')
- #set disk_size = $int($size[:-1]) * 1000
- #elif $size.endswith('T')
- #set disk_size = $int($size[:-1]) * 1000000
- #else
- #set disk_size = $int($size)
- #end if
-max_disk_size_${disk_name}=${disk_size}
- #end for
-#end if
-
-#if $default_disk_max_size.endswith('K')
- #set disk_size = $int($default_disk_max_size[:-1]) / 1000
-#elif $default_disk_max_size.endswith('M')
- #set disk_size = $int($default_disk_max_size[:-1])
-#elif $default_disk_max_size.endswith('G')
- #set disk_size = $int($default_disk_max_size[:-1]) * 1000
-#elif $default_disk_max_size.endswith('T')
- #set disk_size = $int($default_disk_max_size[:-1]) * 1000000
-#else
- #set disk_size = $int($default_disk_max_size)
-#end if
-default_max_disk_size=${disk_size}
-
-partition_names=""
-default_partition_name=""
-#if $partition != None
- #set vol_sizes = [part.strip() for part in $partition.split(';') if part.strip()]
- #for vol_and_size in vol_sizes
- #set vol, vol_size = $vol_and_size.split(' ', 1)
- #set vol = $vol.strip()
- #if $vol == '/'
- #set volname = 'root'
- #elif $vol == 'swap'
- #set volname = 'swap'
- #elif $vol.startswith('/')
- #set volname = $vol[1:].replace('/', '_')
- #else
-# $vol is not starts with /
- #continue
- #end if
-if [ -z "\${partition_names}" ]; then
- partition_names="$volname"
-else
- partition_names="\$partition_names $volname"
-fi
-if [[ "$vol" == "\$default_partition" ]]; then
- default_partition_name=$volname
-fi
-partition_point_$volname=$vol
- #set vol_size = $vol_size.strip()
- #if $vol_size.endswith('%')
- #set vol_percent = $vol_size[:-1]
-partition_percentage_$volname=$vol_percent
- #else
- #if $vol_size.endswith('K')
- #set vol_min_size = $int($vol_size[:-1]) / 1000
- #elif $vol_size.endswith('M')
- #set vol_min_size = $int($vol_size[:-1])
- #elif $vol_size.endswith('G')
- #set vol_min_size = $int($vol_size[:-1]) * 1000
- #elif $vol_size.endswith('T')
- #set vol_min_size = $int($vol_size[:-1]) * 1000000
- #else
- #set vol_min_size = $int($vol_size)
- #end if
-partition_size_$volname=$vol_min_size
- #end if
- #end for
-#end if
-
-#if $partition_size != None
- #set vol_sizes = [part.strip() for part in $partition_size.split(';') if part.strip()]
- #for vol_and_size in $vol_sizes
- #set vol, vol_size = $vol_and_size.split(' ', 1)
- #set vol = $vol.strip()
- #if $vol == '/'
- #set volname = 'root'
- #elif $vol == 'swap'
- #set volname = 'swap'
- #elif $vol.startswith('/')
- #set volname = $vol[1:].replace('/', '_')
- #else
-# $vol is not starts with /
- #continue
- #end if
- #if $vol_size.endswith('K')
- #set vol_min_size = $int($vol_size[:-1]) / 1000
- #elif $vol_size.endswith('M')
- #set vol_min_size = $int($vol_size[:-1])
- #elif $vol_size.endswith('G')
- #set vol_min_size = $int($vol_size[:-1]) * 1000
- #elif $vol_size.endswith('T')
- #set vol_min_size = $int($vol_size[:-1]) * 1000000
- #else
- #set vol_min_size = $int($vol_size)
- #end if
-partitions_size_$volname=${vol_min_size}
- #end for
-#end if
-
-#if $partition_maxsize != None
- #set vol_sizes = [part.strip() for part in $partition_maxsize.split(';') if part.strip()]
- #for vol_and_size in $vol_sizes
- #set vol, vol_size = $vol_and_size.split(' ', 1)
- #set vol = $vol.strip()
- #if $vol == '/'
- #set volname = 'root'
- #elif $vol == 'swap'
- #set volname = 'swap'
- #elif $vol.startswith('/')
- #set volname = $vol[1:].replace('/', '_')
- #else
-# $vol is not starts with /
- #continue
- #end if
- #if $vol_size.endswith('K')
- #set vol_max_size = $int($vol_size[:-1]) / 1000
- #elif $vol_size.endswith('M')
- #set vol_max_size = $int($vol_size[:-1])
- #elif $vol_size.endswith('G')
- #set vol_max_size = $int($vol_size[:-1]) * 1000
- #elif $vol_size.endswith('T')
- #set vol_max_size = $int($vol_size[:-1]) * 1000000
- #else
- #set vol_max_size = $int($vol_size)
- #end if
-partition_maxsize_$volname=${vol_max_size}
- #end for
-#end if
-
-echo "finish partition mapping" >> /tmp/preseed.log
-for key in \${partition_names}; do
- eval "mountpoint=\\${partition_point_\$key}"
- echo "partition names \$key => \${mountpoint}" >> /tmp/preseed.log
- eval "partition_percentage=\\${partition_percentage_\$key}"
- echo "partition percentage \$key => \${partition_percentage}" >> /tmp/preseed.log
- eval "partition_size=\\${partition_size_\$key}"
- echo "partition size \$key => \${partition_size}" >> /tmp/preseed.log
- eval "partition_max_size=\\${partition_max_size_\$key}"
- echo "partition max size \$key => \${partition_max_size}" >> /tmp/preseed.log
-done
-
-
-if [ -z "\${default_partition_name}" ]; then
- default_partition_name=root
-fi
-
-default_partition_percentage=100
-for key in \${partition_names}; do
- if [[ "\$key" == "\${default_partition_name}" ]]; then
- continue
- fi
- if [[ "\$key" == "swap" ]]; then
- continue
- fi
- eval "partition_percentage=\\${partition_percentage_\$key}"
- if [ ! -z "\${partition_percentage}" ]; then
- if [ \${default_partition_percentage} -gt \${partition_percentage} ]; then
- default_partition_percentage=\$((\${default_partition_percentage}-\${partition_percentage}))
- else
- default_partition_percentage=0
- fi
- fi
-done
-eval "partition_percentage_\${default_partition_name}=\${default_partition_percentage}"
-
-if [ -z "\${partition_point_boot}" ]; then
- partition_point_boot="/boot"
- if [ -z "\${partition_names}" ]; then
- partition_names="boot"
- else
- partition_names="\${partition_names} boot"
- fi
-fi
-
-if [ -z "\${partition_size_boot}" ]; then
- partition_size_boot=500
-fi
-
-if [ -z "\${partition_maxsize_boot}" ]; then
- partition_maxsize_boot=\$partition_size_boot
-fi
-
-if [ -z "\${first_disk}" ]; then
- first_disk=/dev/sda
-fi
-
-#if $getVar('keep_old_partitions', '0') != "0"
-echo "d-i grub-installer/with_other_os boolean true" >> /tmp/part-include
-#else
-echo "d-i grub-installer/only_debian boolean true" >> /tmp/part-include
-#end if
-
-echo "d-i grub-installer/bootdev string \${first_disk}" >> /tmp/part-include
-echo "setup bootloader on disk \${first_disk}" >> /tmp/preseed.log
-
-partition_param_boot="\${partition_fstype} \
-\\$primary{ } \\$bootable{ } method{ format } \
-format{ } use_filesystem{ } filesystem{ \${partition_fstype} } \
-mountpoint{ /boot } device{ \${first_disk} } \
-"
-
-if [ -z "\${partition_point_swap}" ]; then
- partition_point_swap="swap"
- if [ -z "\${partition_names}" ]; then
- partition_names="swap"
- else
- partition_names="\${partition_names} swap"
- fi
-fi
-
-if [ -z "\${partition_size_swap}" ]; then
- partition_size_swap=256
-fi
-
-if [ -z "\${partition_percentage_swap}" ]; then
- partition_percentage_swap=10
-fi
-
-if [ -z "\${partition_maxsize_swap}" ]; then
- partition_maxsize_swap=200%
-fi
-
-partition_param_swap="linux-swap \
-\\$primary{ } method{ swap } format{ } \
-device{ \${first_disk} } \
-"
-
-if [ -z "\${partition_point_root}" ]; then
- partition_point_root="/"
- if [ -z "\${partition_names}" ]; then
- partition_names="root"
- else
- partition_names="\$partition_names root"
- fi
-fi
-
-recipe="boot-root ::"
-bios_partition_param="free method{ biosgrub } \
-\\$primary{ } device{ \${first_disk} } \
-"
-recipe="\$recipe 1 1 1 \${bios_partition_param} ."
-
-for key in \${partition_names}; do
- eval "partition=\\${partition_point_\$key}"
- echo "partition \$partition => \$key" >> /tmp/preseed.log
- eval "partition_percentage=\\${partition_percentage_\$key}"
- if [ -z "\${partition_percentage}" ]; then
- partition_percentage=0
- fi
- echo "partition percentage \$partition => \${partition_percentage}" >> /tmp/preseed.log
- eval "partition_size=\\${partition_size_\$key}"
- if [ -z "\${partition_size}" ]; then
- partition_size=1
- fi
- echo "partition size \$partition => \${partition_size}" >> /tmp/preseed.log
- if [ \${partition_percentage} -ne 0 ]; then
- partition_factor="\${partition_size}+\${partition_percentage}%"
- else
- partition_factor="\${partition_size}"
- fi
- echo "partition factor \$partition => \${partition_factor}" >> /tmp/preseed.log
- eval "partition_maxsize=\\${partition_maxsize_\$key}"
- if [ -z \${partition_maxsize} ]; then
- partition_maxsize=-1
- fi
- echo "partition maxsize \$partition => \${partition_maxsize}" >> /tmp/preseed.log
- eval "partition_param=\\${partition_param_\$key}"
- if [ -z "\${partition_param}" ]; then
- partition_param="\${partition_fstype} \
-\\$lvmok{ } method{ format } format{ } \
-use_filesystem{ } filesystem{ \${partition_fstype} } \
-in_vg{ $vgname } lv_name{ \${key}vol } \
-mountpoint{ \$partition }"
- fi
- echo "partition param \$partition => \${partition_param}" >> /tmp/preseed.log
- recipe="\$recipe \${partition_size} \${partition_factor} \${partition_maxsize} \${partition_param} ."
-done
-
-for disk in \${sorted_disks}; do
-#if $getVar('partition_by_path', '0') != "0"
- path_name=\$(basename \${disk})
- disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
- eval "path_disk=\\${disk_path_\${disk_path_name}}"
- disk_name=\$(basename \${path_disk})
-#else
- disk_name=\$(basename \$disk)
-#end if
- eval "used_disk_\${disk_name}=\$disk"
- echo "add disk \$disk into disks" >> /tmp/preseed.log
- eval "max_disk_size=\\${max_disk_size_\${disk_name}}"
- if [ -z "\${max_disk_size}" ]; then
- max_disk_size=\${default_max_disk_size}
- fi
- echo "disk \${disk} max disk size \${max_disk_size}" >> /tmp/preseed.log
- if [ \${max_disk_size} -gt 0 ]; then
- maxsize_param=\${max_disk_size}
- else
- maxsize_param=-1
- fi
- disk_param="\${partition_fstype} \
-\\$defaultignore{ } device{ \${disk} } \
-method{ lvm } vg_name{ $vgname }"
- recipe="\$recipe 512 512+100% \${maxsize_param} \${disk_param} ."
- echo "partition param \${disk_name} => \${disk_param}" >> /tmp/preseed.log
- eval "reserve_disk_size=\\${reserve_disk_size_\${disk_name}}"
- if [ -z "\${reserve_disk_size}" ]; then
- reserve_disk_size=\${default_reserve_disk_size}
- fi
- echo "disk \${disk} reserve disk size \${reserve_disk_size}" >> /tmp/preseed.log
- if [ \${reserve_disk_size} -gt 0 ]; then
- reserve_disk_param="\${partition_fstype} \
-\\$defaultignore{ } device{ \${disk} } \
-method{ lvm } vg_name{ reserved }"
- recipe="\$recipe \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_param} ."
- echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
- fi
-done
-
-
-#if $getVar('keep_old_partitions', '0') == "0"
-for disk in \$disks; do
-#if $getVar('partition_by_path', '0') != "0"
- path_name=\$(basename \${disk})
- disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
- eval "path_disk=\\${disk_path_\${disk_path_name}}"
- disk_name=\$(basename \${path_disk})
-#else
- disk_name=\$(basename \$disk)
-#end if
- eval "used_disk=\\${used_disk_\${disk_name}}"
- if [ -z "\${used_disk}" ]; then
- reserve_disk_param="\${partition_fstype} \
-\\$defaultignore{ } device{ \${disk} } \
-method{ lvm } vg_name{ reserved }"
- recipe="\$recipe 512 512+100% -1 \${reserve_disk_param} ."
- echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
- fi
-done
-#end if
-
-echo "d-i partman-auto/expert_recipe string \$recipe" >> /tmp/part-include
-echo "d-i partman-auto/choose_recipe select boot-root" >> /tmp/part-include
-## echo "d-i partman-lvm/vgcreate string $vgname" >> /tmp/part-include
-## echo "d-i partman-auto-lvm/new_vg_name string $vgname" >> /tmp/part-include
+#set hostname=$getVar('hostname',None)
+#set partition = $getVar('partition', None)
+#set partition_size = $getVar('partition_size', None)
+#set partition_maxsize = $getVar('partition_maxsize', None)
+#set disk_reserve_size = $getVar('disk_reserve_size', None)
+#set disk_max_size = $getVar('disk_max_size', None)
+#set default_disk_reserve_size = $getVar('default_disk_reserve_size', '0')
+#set default_disk_max_size = $getVar('default_disk_max_size', '0')
+
+#if $hostname == None
+#set $vgname = "VolGroup00"
+#else
+#set $vgname = $hostname.split('.')[0]
+#end if
+
+echo "partman early script" >> /tmp/preseed.log
+if [ -e /dev/disk/by-path ]; then
+ set \$(ls -s -l /dev/disk/by-path | tr -s '\t' ' ' | cut -d' ' -f11,13)
+ disk_mapping_nums=\$((\$#/2))
+ disk_mapping_offset=0
+ echo "disk_mapping_nums: \$disk_mapping_nums" >> /tmp/preseed.log
+ echo "disk_mapping: \$@" >> /tmp/preseed.log
+ disk_mapping=""
+ disk_path_mapping=""
+ while [ \$disk_mapping_offset -lt \$disk_mapping_nums ]; do
+ found_disk_type=0
+#if $getVar('disk_type_only','') != ""
+ if expr match "\$1" ".*-${disk_type_only}-.*"; then
+ found_disk_type=1
+ fi
+#else
+ found_disk_type=1
+#end if
+ path_name=\$(basename \$1)
+ disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
+ disk_name=\$(basename \$2)
+ disk_mapping_offset=\$((\${disk_mapping_offset}+1))
+ shift 2
+
+ if [ \$found_disk_type -gt 0 ]; then
+ if [ -z "\${disk_mapping}" ]; then
+ disk_mapping="\${disk_name}"
+ else
+ disk_mapping="\${disk_mapping} \${disk_name}"
+ fi
+ if [ -z "\${disk_path_mapping}" ]; then
+ disk_path_mapping="\${disk_path_name}"
+ else
+ disk_path_mapping="\${disk_path_mapping} \${disk_path_name}"
+ fi
+ eval "disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
+ eval "disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
+ eval "disk_path_\${disk_path_name}=/dev/\${disk_name}"
+ eval "disk_path_\${disk_name}=/dev/\${disk_name}"
+ else
+ eval "ignore_disk_\${disk_name}=/dev/disk/by-path/\${path_name}"
+ eval "ignore_disk_\${disk_path_name}=/dev/disk/by-path/\${path_name}"
+ eval "ignore_disk_path_\${disk_path_name}=/dev/\${disk_name}"
+ eval "ignore_disk_path_\${disk_name}=/dev/\${disk_name}"
+ fi
+ done
+
+ for key in \${disk_mapping}; do
+ eval "disk_path=\\${disk_\$key}"
+ echo "disk_mapping \$key => \${disk_path}" >> /tmp/preseed.log
+ done
+
+ for key in \${disk_path_mapping}; do
+ eval "disk=\\${disk_path_\$key}"
+ echo "disk path mapping \$key => \${disk}" >> /tmp/preseed.log
+ done
+else
+ echo "/dev/disk/by-path does not exist" >> /tmp/preseed.log
+fi
+
+partition_disks=""
+disks=""
+for disk in \$(list-devices disk); do
+ disk_name=\$(basename \$disk)
+ eval "disk_path=\\${disk_\${disk_name}}"
+ if [ -z "\${disk_path}" ]; then
+ eval "ignore_disk_path=\\${ignore_disk_\${disk_name}}"
+ if [ ! -z "\${ignore_disk_path}" ]; then
+ echo "ignore disk \${disk_name} since it is not in disk_mapping" >> /tmp/preseed.log
+ continue
+ else
+ echo "did not found disk path for \$disk but it is not ignored" >> /tmp/preseed.log
+ eval "disk_\${disk_name}=/dev/\${disk_name}"
+ eval "disk_path_\${disk_name}=/dev/\${disk_name}"
+ fi
+ fi
+ found_disk=0
+
+#if $getVar('partitions_only','') != ""
+ #for $partition_only in $partitions_only.split(',')
+ #if not $partition_only
+ #continue
+ #end if
+ if expr match "\${disk_name}" "$partition_only"; then
+ found_disk=1
+ else
+ echo "disk \${disk_name} does not match $partition_only" >> /tmp/preseed.log
+ fi
+ #end for
+#else
+ found_disk=1
+#end if
+
+#if $getVar('partition_by_path', '0') != "0"
+ eval "disk=\\${disk_\${disk_name}}"
+#end if
+
+ if [ \$found_disk -gt 0 ]; then
+ echo "add disk \${disk} in partitioning list" >> /tmp/preseed.log
+ if [ -z "\${partition_disks}" ]; then
+ partition_disks="\${disk}"
+ else
+ partition_disks="\${partition_disks} \${disk}"
+ fi
+ fi
+ if [ -z "\$disks" ]; then
+ disks="\${disk}"
+ else
+ disks="\${disks} \${disk}"
+ fi
+done
+echo "partition disks: \${partition_disks}" >> /tmp/preseed.log
+echo "disks \${disks}" >> /tmp/preseed.log
+
+#if $getVar('sort_disks', '0') != "0"
+sorted_disks=\$(printf '%s\n' \${partition_disks} | sort)
+#else
+sorted_disks=\${partition_disks}
+#end if
+echo "sorted disks \${sorted_disks}" >> /tmp/preseed.log
+
+#if $getVar('start_from_disk', '') != ""
+ #set $start_from_disk = $int($start_from_disk)
+ #if $start_from_disk > 0
+ #set $disk_start_offset = $start_from_disk - 1
+ #else
+ #set $disk_start_offset = 0
+ #end if
+set \${sorted_disks}
+shift $disk_start_offset
+sorted_disks=\$@
+echo "sorted disks begin from the $start_from_disk: \${sorted_disks}" >> /tmp/preseed.log
+#end if
+
+#if $getVar('disk_num', '') != ""
+set \${sorted_disks}
+sorted_disks=\$(printf '%s\n' \$@ | head -n${disk_num})
+echo "sorted disks for $disk_num disks: \${sorted_disks}" >> /tmp/preseed.log
+#end if
+
+first_disk=""
+for disk in \${sorted_disks}; do
+ if [ -z "\${first_disk}" ]; then
+ first_disk=\${disk}
+ break
+ fi
+done
+echo "first disk \${first_disk}" >> /tmp/preseed.log
+
+#if $getVar('keep_old_partitions', '0') != "0"
+for disk in \${sorted_disks}; do
+ dd if=/dev/zero of=\${disk} bs=512 count=1
+done
+remove_disks=\${sorted_disks}
+#else
+for disk in \$disks; do
+ dd if=/dev/zero of=\$disk bs=512 count=1
+done
+remove_disks=\${disks}
+#end if
+echo "remove disks \${remove_disks}" >> /tmp/preseed.log
+
+disk_partitions=\$(pvs --noheadings --separator :| cut -d: -f1)
+remove_partitions=""
+remove_vgs=""
+for disk_partition in \${disk_partitions}; do
+ vg=\$(pvs --noheadings --separator : \${disk_partition} | cut -d: -f2)
+ remove_vg=""
+ remove_partition=""
+ for remove_disk in \${remove_disks}; do
+#if $getVar('partition_by_path', '0') != "0"
+ path_name=\$(basename \${remove_disk})
+ disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
+ remove_disk_path=\${remove_disk}
+ eval "remove_disk=\\${disk_path_\${disk_path_name}}"
+#else
+ disk_name=\$(basename \${remove_disk})
+ eval "remove_disk_path=\\${disk_\${disk_name}}"
+#end if
+ if [ -z "\${remove_disk}" ]; then
+ continue
+ fi
+ if [ -z "\${remove_disk_path}" ]; then
+ continue
+ fi
+ if expr match "\${disk_partition}" "\${remove_disk_path}.*"; then
+ remove_vg="\$vg"
+ remove_partition="\${disk_partition}"
+ else
+ echo "partition \${disk_partition} does not match \${remove_disk_path}.*" >> /tmp/preseed.log
+ fi
+ if expr match "\${disk_partition}" "\${remove_disk}.*"; then
+ remove_vg="\$vg"
+ remove_partition="\${disk_partition}"
+ else
+ echo "partition \${disk_partition} does not match \${remove_disk}.*" >> /tmp/preseed.log
+ fi
+ if [[ "\$vg" == "$vgname" ]]; then
+ remove_vg="\$vg"
+ remove_partition="\${disk_partition}"
+ fi
+ done
+ if [ ! -z "\${remove_vg}" ]; then
+ if [ -z "\${remove_vgs}" ]; then
+ remove_vgs="\${remove_vg}"
+ else
+ vg_removed=0
+ for vg in \${remove_vgs}; do
+ if [[ "\$vg" == "\${remove_vg}" ]]; then
+ vg_removed=1
+ fi
+ done
+ if [ \${vg_removed} -eq 0 ]; then
+ remove_vgs="\${remove_vgs} \${remove_vg}"
+ fi
+ fi
+ fi
+ if [ ! -z "\${remove_partition}" ]; then
+ if [ -z "\${remove_partitions}" ]; then
+ remove_partitions="\${remove_partition}"
+ else
+ pv_removed=0
+ for pv in ${remove_partitions}; do
+ if [[ "\$pv" == "\${remove_partition}" ]]; then
+ pv_removed=1
+ fi
+ done
+ if [ \${pv_removed} -eq 0 ]; then
+ remove_partitions="\${remove_partitions} \${remove_partition}"
+ fi
+ fi
+ fi
+done
+
+echo "remove vgs \${remove_vgs}" >> /tmp/preseed.log
+for remove_vg in \${remove_vgs}; do
+ vgremove -f \${remove_vg}
+done
+
+echo "remove partitions \${remove_partitions} from \${remove_vgs}" >> /tmp/preseed.log
+for remove_partition in \${remove_partitions}; do
+ pvremove -ff -y \${remove_partition}
+done
+
+echo "remove disks \${remove_disks}" >> /tmp/preseed.log
+
+partition_disks=""
+#if $getVar('keep_old_partitions', '0') != "0"
+for disk in \${sorted_disks}; do
+#else
+for disk in \${disks}; do
+#end if
+ if [ -z "\${partition_disks}" ]; then
+ partition_disks="\${disk}"
+ else
+ partition_disks="\${partition_disks} \${disk}"
+ fi
+done
+
+partition_disks_str=\$(echo \${partition_disks} | tr ' ' ',')
+echo "d-i partman-auto/select_disks multiselect \${partition_disks_str}" >> /tmp/part-include
+echo "d-i partman-auto/disk string \${partition_disks}" >> /tmp/part-include
+echo "disks \${partition_disks}" >> /tmp/preseed.log
+
+default_partition=$getVar('default_partition', '/')
+partition_fstype=$getVar('partition_fstype', 'ext3')
+
+echo "default partition \${default_partition}" >> /tmp/preseed.log
+echo "partition fstype \${partition_fstype}" >> /tmp/preseed.log
+
+#if $disk_reserve_size != None
+ #set disk_sizes = [disk_size.strip() for disk_size in $disk_reserve_size.split(';') if disk_size.strip()]
+ #for disk_and_size in $disk_sizes
+ #set disk_name, size = $disk_and_size.split(' ', 1)
+ #set disk_name = $disk_name.strip()
+ #if $size.endswith('K')
+ #set disk_size = $int($size[:-1]) / 1000
+ #elif $size.endswith('M')
+ #set disk_size = $int($size[:-1])
+ #elif $size.endswith('G')
+ #set disk_size = $int($size[:-1]) * 1000
+ #elif $size.endswith('T')
+ #set disk_size = $int($size[:-1]) * 1000000
+ #else
+ #set disk_size = $int($size)
+ #end if
+reserve_disk_size_${disk_name}=${disk_size}
+ #end for
+#end if
+
+#if $default_disk_reserve_size.endswith('K')
+ #set disk_size = $int($default_disk_reserve_size[:-1]) / 1000
+#elif $default_disk_reserve_size.endswith('M')
+ #set disk_size = $int($default_disk_reserve_size[:-1])
+#elif $default_disk_reserve_size.endswith('G')
+ #set disk_size = $int($default_disk_reserve_size[:-1]) * 1000
+#elif $default_disk_reserve_size.endswith('T')
+ #set disk_size = $int($default_disk_reserve_size[:-1]) * 1000000
+#else
+ #set disk_size = $int($default_disk_reserve_size)
+#end if
+default_reserve_disk_size=${disk_size}
+
+#if $disk_max_size != None
+ #set disk_sizes = [disk_size.strip() for disk_size in $disk_max_size.split(';') if disk_size.strip()]
+ #for disk_and_size in $disk_sizes
+ #set disk_name, size = $disk_and_size.split(' ', 1)
+ #set disk_name = $disk_name.strip()
+ #if $size.endswith('K')
+ #set disk_size = $int($size[:-1]) / 1000
+ #elif $size.endswith('M')
+ #set disk_size = $int($size[:-1])
+ #elif $size.endswith('G')
+ #set disk_size = $int($size[:-1]) * 1000
+ #elif $size.endswith('T')
+ #set disk_size = $int($size[:-1]) * 1000000
+ #else
+ #set disk_size = $int($size)
+ #end if
+max_disk_size_${disk_name}=${disk_size}
+ #end for
+#end if
+
+#if $default_disk_max_size.endswith('K')
+ #set disk_size = $int($default_disk_max_size[:-1]) / 1000
+#elif $default_disk_max_size.endswith('M')
+ #set disk_size = $int($default_disk_max_size[:-1])
+#elif $default_disk_max_size.endswith('G')
+ #set disk_size = $int($default_disk_max_size[:-1]) * 1000
+#elif $default_disk_max_size.endswith('T')
+ #set disk_size = $int($default_disk_max_size[:-1]) * 1000000
+#else
+ #set disk_size = $int($default_disk_max_size)
+#end if
+default_max_disk_size=${disk_size}
+
+partition_names=""
+default_partition_name=""
+#if $partition != None
+ #set vol_sizes = [part.strip() for part in $partition.split(';') if part.strip()]
+ #for vol_and_size in vol_sizes
+ #set vol, vol_size = $vol_and_size.split(' ', 1)
+ #set vol = $vol.strip()
+ #if $vol == '/'
+ #set volname = 'root'
+ #elif $vol == 'swap'
+ #set volname = 'swap'
+ #elif $vol.startswith('/')
+ #set volname = $vol[1:].replace('/', '_')
+ #else
+# $vol is not starts with /
+ #continue
+ #end if
+if [ -z "\${partition_names}" ]; then
+ partition_names="$volname"
+else
+ partition_names="\$partition_names $volname"
+fi
+if [[ "$vol" == "\$default_partition" ]]; then
+ default_partition_name=$volname
+fi
+partition_point_$volname=$vol
+ #set vol_size = $vol_size.strip()
+ #if $vol_size.endswith('%')
+ #set vol_percent = $vol_size[:-1]
+partition_percentage_$volname=$vol_percent
+ #else
+ #if $vol_size.endswith('K')
+ #set vol_min_size = $int($vol_size[:-1]) / 1000
+ #elif $vol_size.endswith('M')
+ #set vol_min_size = $int($vol_size[:-1])
+ #elif $vol_size.endswith('G')
+ #set vol_min_size = $int($vol_size[:-1]) * 1000
+ #elif $vol_size.endswith('T')
+ #set vol_min_size = $int($vol_size[:-1]) * 1000000
+ #else
+ #set vol_min_size = $int($vol_size)
+ #end if
+partition_size_$volname=$vol_min_size
+ #end if
+ #end for
+#end if
+
+#if $partition_size != None
+ #set vol_sizes = [part.strip() for part in $partition_size.split(';') if part.strip()]
+ #for vol_and_size in $vol_sizes
+ #set vol, vol_size = $vol_and_size.split(' ', 1)
+ #set vol = $vol.strip()
+ #if $vol == '/'
+ #set volname = 'root'
+ #elif $vol == 'swap'
+ #set volname = 'swap'
+ #elif $vol.startswith('/')
+ #set volname = $vol[1:].replace('/', '_')
+ #else
+# $vol is not starts with /
+ #continue
+ #end if
+ #if $vol_size.endswith('K')
+ #set vol_min_size = $int($vol_size[:-1]) / 1000
+ #elif $vol_size.endswith('M')
+ #set vol_min_size = $int($vol_size[:-1])
+ #elif $vol_size.endswith('G')
+ #set vol_min_size = $int($vol_size[:-1]) * 1000
+ #elif $vol_size.endswith('T')
+ #set vol_min_size = $int($vol_size[:-1]) * 1000000
+ #else
+ #set vol_min_size = $int($vol_size)
+ #end if
+partitions_size_$volname=${vol_min_size}
+ #end for
+#end if
+
+#if $partition_maxsize != None
+ #set vol_sizes = [part.strip() for part in $partition_maxsize.split(';') if part.strip()]
+ #for vol_and_size in $vol_sizes
+ #set vol, vol_size = $vol_and_size.split(' ', 1)
+ #set vol = $vol.strip()
+ #if $vol == '/'
+ #set volname = 'root'
+ #elif $vol == 'swap'
+ #set volname = 'swap'
+ #elif $vol.startswith('/')
+ #set volname = $vol[1:].replace('/', '_')
+ #else
+# $vol is not starts with /
+ #continue
+ #end if
+ #if $vol_size.endswith('K')
+ #set vol_max_size = $int($vol_size[:-1]) / 1000
+ #elif $vol_size.endswith('M')
+ #set vol_max_size = $int($vol_size[:-1])
+ #elif $vol_size.endswith('G')
+ #set vol_max_size = $int($vol_size[:-1]) * 1000
+ #elif $vol_size.endswith('T')
+ #set vol_max_size = $int($vol_size[:-1]) * 1000000
+ #else
+ #set vol_max_size = $int($vol_size)
+ #end if
+partition_maxsize_$volname=${vol_max_size}
+ #end for
+#end if
+
+echo "finish partition mapping" >> /tmp/preseed.log
+for key in \${partition_names}; do
+ eval "mountpoint=\\${partition_point_\$key}"
+ echo "partition names \$key => \${mountpoint}" >> /tmp/preseed.log
+ eval "partition_percentage=\\${partition_percentage_\$key}"
+ echo "partition percentage \$key => \${partition_percentage}" >> /tmp/preseed.log
+ eval "partition_size=\\${partition_size_\$key}"
+ echo "partition size \$key => \${partition_size}" >> /tmp/preseed.log
+ eval "partition_max_size=\\${partition_max_size_\$key}"
+ echo "partition max size \$key => \${partition_max_size}" >> /tmp/preseed.log
+done
+
+
+if [ -z "\${default_partition_name}" ]; then
+ default_partition_name=root
+fi
+
+default_partition_percentage=100
+for key in \${partition_names}; do
+ if [[ "\$key" == "\${default_partition_name}" ]]; then
+ continue
+ fi
+ if [[ "\$key" == "swap" ]]; then
+ continue
+ fi
+ eval "partition_percentage=\\${partition_percentage_\$key}"
+ if [ ! -z "\${partition_percentage}" ]; then
+ if [ \${default_partition_percentage} -gt \${partition_percentage} ]; then
+ default_partition_percentage=\$((\${default_partition_percentage}-\${partition_percentage}))
+ else
+ default_partition_percentage=0
+ fi
+ fi
+done
+eval "partition_percentage_\${default_partition_name}=\${default_partition_percentage}"
+
+if [ -z "\${partition_point_boot}" ]; then
+ partition_point_boot="/boot"
+ if [ -z "\${partition_names}" ]; then
+ partition_names="boot"
+ else
+ partition_names="\${partition_names} boot"
+ fi
+fi
+
+if [ -z "\${partition_size_boot}" ]; then
+ partition_size_boot=500
+fi
+
+if [ -z "\${partition_maxsize_boot}" ]; then
+ partition_maxsize_boot=\$partition_size_boot
+fi
+
+if [ -z "\${first_disk}" ]; then
+ first_disk=/dev/sda
+fi
+
+#if $getVar('keep_old_partitions', '0') != "0"
+echo "d-i grub-installer/with_other_os boolean true" >> /tmp/part-include
+#else
+echo "d-i grub-installer/only_debian boolean true" >> /tmp/part-include
+#end if
+
+echo "d-i grub-installer/bootdev string \${first_disk}" >> /tmp/part-include
+echo "setup bootloader on disk \${first_disk}" >> /tmp/preseed.log
+
+partition_param_boot="\${partition_fstype} \
+\\$primary{ } \\$bootable{ } method{ format } \
+format{ } use_filesystem{ } filesystem{ \${partition_fstype} } \
+mountpoint{ /boot } device{ \${first_disk} } \
+"
+
+if [ -z "\${partition_point_swap}" ]; then
+ partition_point_swap="swap"
+ if [ -z "\${partition_names}" ]; then
+ partition_names="swap"
+ else
+ partition_names="\${partition_names} swap"
+ fi
+fi
+
+if [ -z "\${partition_size_swap}" ]; then
+ partition_size_swap=256
+fi
+
+if [ -z "\${partition_percentage_swap}" ]; then
+ partition_percentage_swap=10
+fi
+
+if [ -z "\${partition_maxsize_swap}" ]; then
+ partition_maxsize_swap=200%
+fi
+
+partition_param_swap="linux-swap \
+\\$primary{ } method{ swap } format{ } \
+device{ \${first_disk} } \
+"
+
+if [ -z "\${partition_point_root}" ]; then
+ partition_point_root="/"
+ if [ -z "\${partition_names}" ]; then
+ partition_names="root"
+ else
+ partition_names="\$partition_names root"
+ fi
+fi
+
+recipe="boot-root ::"
+bios_partition_param="free method{ biosgrub } \
+\\$primary{ } device{ \${first_disk} } \
+"
+recipe="\$recipe 1 1 1 \${bios_partition_param} ."
+
+for key in \${partition_names}; do
+ eval "partition=\\${partition_point_\$key}"
+ echo "partition \$partition => \$key" >> /tmp/preseed.log
+ eval "partition_percentage=\\${partition_percentage_\$key}"
+ if [ -z "\${partition_percentage}" ]; then
+ partition_percentage=0
+ fi
+ echo "partition percentage \$partition => \${partition_percentage}" >> /tmp/preseed.log
+ eval "partition_size=\\${partition_size_\$key}"
+ if [ -z "\${partition_size}" ]; then
+ partition_size=1
+ fi
+ echo "partition size \$partition => \${partition_size}" >> /tmp/preseed.log
+ if [ \${partition_percentage} -ne 0 ]; then
+ partition_factor="\${partition_size}+\${partition_percentage}%"
+ else
+ partition_factor="\${partition_size}"
+ fi
+ echo "partition factor \$partition => \${partition_factor}" >> /tmp/preseed.log
+ eval "partition_maxsize=\\${partition_maxsize_\$key}"
+ if [ -z \${partition_maxsize} ]; then
+ partition_maxsize=-1
+ fi
+ echo "partition maxsize \$partition => \${partition_maxsize}" >> /tmp/preseed.log
+ eval "partition_param=\\${partition_param_\$key}"
+ if [ -z "\${partition_param}" ]; then
+ partition_param="\${partition_fstype} \
+\\$lvmok{ } method{ format } format{ } \
+use_filesystem{ } filesystem{ \${partition_fstype} } \
+in_vg{ $vgname } lv_name{ \${key}vol } \
+mountpoint{ \$partition }"
+ fi
+ echo "partition param \$partition => \${partition_param}" >> /tmp/preseed.log
+ recipe="\$recipe \${partition_size} \${partition_factor} \${partition_maxsize} \${partition_param} ."
+done
+
+for disk in \${sorted_disks}; do
+#if $getVar('partition_by_path', '0') != "0"
+ path_name=\$(basename \${disk})
+ disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
+ eval "path_disk=\\${disk_path_\${disk_path_name}}"
+ disk_name=\$(basename \${path_disk})
+#else
+ disk_name=\$(basename \$disk)
+#end if
+ eval "used_disk_\${disk_name}=\$disk"
+ echo "add disk \$disk into disks" >> /tmp/preseed.log
+ eval "max_disk_size=\\${max_disk_size_\${disk_name}}"
+ if [ -z "\${max_disk_size}" ]; then
+ max_disk_size=\${default_max_disk_size}
+ fi
+ echo "disk \${disk} max disk size \${max_disk_size}" >> /tmp/preseed.log
+ if [ \${max_disk_size} -gt 0 ]; then
+ maxsize_param=\${max_disk_size}
+ else
+ maxsize_param=-1
+ fi
+ disk_param="\${partition_fstype} \
+\\$defaultignore{ } device{ \${disk} } \
+method{ lvm } vg_name{ $vgname }"
+ recipe="\$recipe 512 512+100% \${maxsize_param} \${disk_param} ."
+ echo "partition param \${disk_name} => \${disk_param}" >> /tmp/preseed.log
+ eval "reserve_disk_size=\\${reserve_disk_size_\${disk_name}}"
+ if [ -z "\${reserve_disk_size}" ]; then
+ reserve_disk_size=\${default_reserve_disk_size}
+ fi
+ echo "disk \${disk} reserve disk size \${reserve_disk_size}" >> /tmp/preseed.log
+ if [ \${reserve_disk_size} -gt 0 ]; then
+ reserve_disk_param="\${partition_fstype} \
+\\$defaultignore{ } device{ \${disk} } \
+method{ lvm } vg_name{ reserved }"
+ recipe="\$recipe \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_size} \${reserve_disk_param} ."
+ echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
+ fi
+done
+
+
+#if $getVar('keep_old_partitions', '0') == "0"
+for disk in \$disks; do
+#if $getVar('partition_by_path', '0') != "0"
+ path_name=\$(basename \${disk})
+ disk_path_name=\$(echo \${path_name} | tr '-' '_' | tr ':' '_' | tr '.' '_')
+ eval "path_disk=\\${disk_path_\${disk_path_name}}"
+ disk_name=\$(basename \${path_disk})
+#else
+ disk_name=\$(basename \$disk)
+#end if
+ eval "used_disk=\\${used_disk_\${disk_name}}"
+ if [ -z "\${used_disk}" ]; then
+ reserve_disk_param="\${partition_fstype} \
+\\$defaultignore{ } device{ \${disk} } \
+method{ lvm } vg_name{ reserved }"
+ recipe="\$recipe 512 512+100% -1 \${reserve_disk_param} ."
+ echo "reserve partition param \${disk_name} => \${reserve_disk_param}" >> /tmp/preseed.log
+ fi
+done
+#end if
+
+echo "d-i partman-auto/expert_recipe string \$recipe" >> /tmp/part-include
+echo "d-i partman-auto/choose_recipe select boot-root" >> /tmp/part-include
+## echo "d-i partman-lvm/vgcreate string $vgname" >> /tmp/part-include
+## echo "d-i partman-auto-lvm/new_vg_name string $vgname" >> /tmp/part-include
diff --git a/deploy/adapters/cobbler/snippets/preseed_rsyslog.conf b/deploy/adapters/cobbler/snippets/preseed_rsyslog.conf
index a772279c..11e77227 100644
--- a/deploy/adapters/cobbler/snippets/preseed_rsyslog.conf
+++ b/deploy/adapters/cobbler/snippets/preseed_rsyslog.conf
@@ -1,67 +1,67 @@
-cat << EOL > /etc/rsyslog.conf
-\#\#\#\# MODULES \#\#\#\##
-
-\\$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
-\\$ModLoad imfile
-
-\\$WorkDirectory /var/spool/rsyslog
-\\$ActionQueueType LinkedList
-\\$ActionQueueFileName srvrfwd
-\\$ActionResumeRetryCount -1
-\\$ActionQueueSaveOnShutDown on
-#if $getVar("compass_server", "") != ""
-\# *.* @@$compass_server:514
-#else
-\# *.* @@$server:514
-#end if
-
-\# Provides UDP syslog reception
-\#\\$ModLoad imudp
-\#\\$UDPServerRun 514
-
-\# Provides TCP syslog reception
-\\$ModLoad imtcp
-\\$InputTCPServerRun 514
-#set system_name = $getVar('system_name','')
-\\$LocalHostName $system_name
-
-\#\#\#\# GLOBAL DIRECTIVES \#\#\#\##
-
-\# Use default timestamp format
-\\$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
-
-\# File syncing capability is disabled by default. This feature is usually not required,
-\# not useful and an extreme performance hit
-\#\\$ActionFileEnableSync on
-
-\# Include all config files in /etc/rsyslog.d/
-\\$IncludeConfig /etc/rsyslog.d/*.conf
-
-
-\#\#\#\# RULES \#\#\#\##
-
-\# Log anything (except mail) of level info or higher.
-\# Don't log private authentication messages!
-syslog.*,daemon.* /var/log/messages
-
-\# The authpriv file has restricted access.
-authpriv.* /var/log/secure
-
-\# Log all the mail messages in one place.
-mail.* -/var/log/maillog
-
-\# Log cron stuff
-cron.* /var/log/cron
-
-\# Everybody gets emergency messages
-*.emerg *
-
-\# Save news errors of level crit and higher in a special file.
-uucp,news.crit /var/log/spooler
-
-\# Save boot messages also to boot.log
-local7.* /var/log/boot.log
-
-EOL
-
-update-rc.d rsyslog defaults 12 88
+cat << EOL > /etc/rsyslog.conf
+\#\#\#\# MODULES \#\#\#\##
+
+\\$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+\\$ModLoad imfile
+
+\\$WorkDirectory /var/spool/rsyslog
+\\$ActionQueueType LinkedList
+\\$ActionQueueFileName srvrfwd
+\\$ActionResumeRetryCount -1
+\\$ActionQueueSaveOnShutDown on
+#if $getVar("compass_server", "") != ""
+\# *.* @@$compass_server:514
+#else
+\# *.* @@$server:514
+#end if
+
+\# Provides UDP syslog reception
+\#\\$ModLoad imudp
+\#\\$UDPServerRun 514
+
+\# Provides TCP syslog reception
+\\$ModLoad imtcp
+\\$InputTCPServerRun 514
+#set system_name = $getVar('system_name','')
+\\$LocalHostName $system_name
+
+\#\#\#\# GLOBAL DIRECTIVES \#\#\#\##
+
+\# Use default timestamp format
+\\$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+\# File syncing capability is disabled by default. This feature is usually not required,
+\# not useful and an extreme performance hit
+\#\\$ActionFileEnableSync on
+
+\# Include all config files in /etc/rsyslog.d/
+\\$IncludeConfig /etc/rsyslog.d/*.conf
+
+
+\#\#\#\# RULES \#\#\#\##
+
+\# Log anything (except mail) of level info or higher.
+\# Don't log private authentication messages!
+syslog.*,daemon.* /var/log/messages
+
+\# The authpriv file has restricted access.
+authpriv.* /var/log/secure
+
+\# Log all the mail messages in one place.
+mail.* -/var/log/maillog
+
+\# Log cron stuff
+cron.* /var/log/cron
+
+\# Everybody gets emergency messages
+*.emerg *
+
+\# Save news errors of level crit and higher in a special file.
+uucp,news.crit /var/log/spooler
+
+\# Save boot messages also to boot.log
+local7.* /var/log/boot.log
+
+EOL
+
+update-rc.d rsyslog defaults 12 88
diff --git a/deploy/adapters/cobbler/snippets/preseed_software_ansible b/deploy/adapters/cobbler/snippets/preseed_software_ansible
index 744eced6..cde79356 100644
--- a/deploy/adapters/cobbler/snippets/preseed_software_ansible
+++ b/deploy/adapters/cobbler/snippets/preseed_software_ansible
@@ -1 +1 @@
-d-i pkgsel/include string ntp ssh openssh-server wget vim
+d-i pkgsel/include string ntp ssh openssh-server wget vim
diff --git a/deploy/adapters/cobbler/snippets/preseed_software_chef b/deploy/adapters/cobbler/snippets/preseed_software_chef
index 65b7a83e..febb68bc 100644
--- a/deploy/adapters/cobbler/snippets/preseed_software_chef
+++ b/deploy/adapters/cobbler/snippets/preseed_software_chef
@@ -1 +1 @@
-d-i pkgsel/include string ntp ssh wget chef
+d-i pkgsel/include string ntp ssh wget chef
diff --git a/deploy/adapters/cobbler/snippets/preseed_ssh b/deploy/adapters/cobbler/snippets/preseed_ssh
index 3ec4466b..1a4ff391 100644
--- a/deploy/adapters/cobbler/snippets/preseed_ssh
+++ b/deploy/adapters/cobbler/snippets/preseed_ssh
@@ -1,36 +1,36 @@
-sed -i 's/PermitRootLogin.*/PermitRootLogin yes/g' /etc/ssh/sshd_config
-#set ssh_keys = $getVar("push_ssh_keys", "/root/.ssh/id_rsa.pub")
-#if $ssh_keys != ""
- #set user_name = $getVar("username", "root")
- #if $user_name == "root"
- #set home = "/root"
- #else
- #set home = "/home/%s" % $user_name
- #end if
-mkdir -p $home/.ssh
-
-chmod 700 -R $home/.ssh
- #set $firstline = True
- #for $ssh_key in $ssh_keys.split(',')
- #if not $ssh_key
- #continue
- #end if
- #try
- #set $f = $open($ssh_key)
- #if firstline
-cat << EOF > $home/.ssh/authorized_keys
- #echo $f.read()
-EOF
- #else
-cat << EOF >> $home/.ssh/authorized_keys
- #echo $f.read()
-EOF
- #end if
- #set $firstline = False
- #silent $f.close()
- #except
-# failed to read from $ssh_key
- #end try
- #end for
-chmod 600 $home/.ssh/authorized_keys
-#end if
+sed -i 's/PermitRootLogin.*/PermitRootLogin yes/g' /etc/ssh/sshd_config
+#set ssh_keys = $getVar("push_ssh_keys", "/root/.ssh/id_rsa.pub")
+#if $ssh_keys != ""
+ #set user_name = $getVar("username", "root")
+ #if $user_name == "root"
+ #set home = "/root"
+ #else
+ #set home = "/home/%s" % $user_name
+ #end if
+mkdir -p $home/.ssh
+
+chmod 700 -R $home/.ssh
+ #set $firstline = True
+ #for $ssh_key in $ssh_keys.split(',')
+ #if not $ssh_key
+ #continue
+ #end if
+ #try
+ #set $f = $open($ssh_key)
+ #if firstline
+cat << EOF > $home/.ssh/authorized_keys
+ #echo $f.read()
+EOF
+ #else
+cat << EOF >> $home/.ssh/authorized_keys
+ #echo $f.read()
+EOF
+ #end if
+ #set $firstline = False
+ #silent $f.close()
+ #except
+# failed to read from $ssh_key
+ #end try
+ #end for
+chmod 600 $home/.ssh/authorized_keys
+#end if
diff --git a/deploy/adapters/cobbler/snippets/preseed_sysctl.conf b/deploy/adapters/cobbler/snippets/preseed_sysctl.conf
index e2e4c3b3..c227ecfa 100644
--- a/deploy/adapters/cobbler/snippets/preseed_sysctl.conf
+++ b/deploy/adapters/cobbler/snippets/preseed_sysctl.conf
@@ -1,72 +1,72 @@
-cat << EOF > /etc/sysctl.conf
-#raw
-# Kernel sysctl configuration file for Red Hat Linux
-#
-# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
-# sysctl.conf(5) for more details.
-
-# Controls IP packet forwarding
-net.ipv4.ip_forward = 0
-
-# Controls source route verification
-net.ipv4.conf.default.rp_filter = 1
-
-# Do not accept source routing
-net.ipv4.conf.default.accept_source_route = 0
-
-# Controls the System Request debugging functionality of the kernel
-kernel.sysrq = 0
-
-# Controls whether core dumps will append the PID to the core filename.
-# Useful for debugging multi-threaded applications.
-kernel.core_uses_pid = 1
-
-# Controls the use of TCP syncookies
-net.ipv4.tcp_syncookies = 1
-
-# Controls the default maxmimum size of a mesage queue
-kernel.msgmnb = 65536
-
-# Controls the maximum size of a message, in bytes
-kernel.msgmax = 65536
-
-# Controls the maximum shared segment size, in bytes
-kernel.shmmax = 68719476736
-
-# Controls the maximum number of shared memory segments, in pages
-kernel.shmall = 4294967296
-
-# increase TCP max buffer size settable using setsockopt()
-net.core.rmem_max = 16777216
-net.core.wmem_max = 16777216
-
-# increase Linux autotuning TCP buffer limit
-net.ipv4.tcp_rmem = 4096 87380 16777216
-net.ipv4.tcp_wmem = 4096 65536 16777216
-
-# increase the length of the processor input queue
-net.core.netdev_max_backlog = 30000
-net.ipv4.tcp_max_syn_backlog = 4096
-
-# recommended default congestion control is htcp
-net.ipv4.tcp_congestion_control=htcp
-
-# recommended for hosts with jumbo frames enabled
-net.ipv4.tcp_mtu_probing=1
-
-# increase client parallel connections
-net.ipv4.ip_local_port_range = 15000 61000
-net.ipv4.tcp_fin_timeout=30
-
-# fast cycling of sockets in time_wait state and re-using them
-net.ipv4.tcp_tw_recycle = 1
-net.ipv4.tcp_tw_reuse = 1
-
-# increase the maximum number of requests queued to a listen socket
-net.core.somaxconn = 8192
-
-# avoid caching tcp network transfer statistics
-net.ipv4.route.flush=1
-#end raw
-EOF
-sysctl -p
+cat << EOF > /etc/sysctl.conf
+#raw
+# Kernel sysctl configuration file for Red Hat Linux
+#
+# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
+# sysctl.conf(5) for more details.
+
+# Controls IP packet forwarding
+net.ipv4.ip_forward = 0
+
+# Controls source route verification
+net.ipv4.conf.default.rp_filter = 1
+
+# Do not accept source routing
+net.ipv4.conf.default.accept_source_route = 0
+
+# Controls the System Request debugging functionality of the kernel
+kernel.sysrq = 0
+
+# Controls whether core dumps will append the PID to the core filename.
+# Useful for debugging multi-threaded applications.
+kernel.core_uses_pid = 1
+
+# Controls the use of TCP syncookies
+net.ipv4.tcp_syncookies = 1
+
+# Controls the default maxmimum size of a mesage queue
+kernel.msgmnb = 65536
+
+# Controls the maximum size of a message, in bytes
+kernel.msgmax = 65536
+
+# Controls the maximum shared segment size, in bytes
+kernel.shmmax = 68719476736
+
+# Controls the maximum number of shared memory segments, in pages
+kernel.shmall = 4294967296
+
+# increase TCP max buffer size settable using setsockopt()
+net.core.rmem_max = 16777216
+net.core.wmem_max = 16777216
+
+# increase Linux autotuning TCP buffer limit
+net.ipv4.tcp_rmem = 4096 87380 16777216
+net.ipv4.tcp_wmem = 4096 65536 16777216
+
+# increase the length of the processor input queue
+net.core.netdev_max_backlog = 30000
+net.ipv4.tcp_max_syn_backlog = 4096
+
+# recommended default congestion control is htcp
+net.ipv4.tcp_congestion_control=htcp
+
+# recommended for hosts with jumbo frames enabled
+net.ipv4.tcp_mtu_probing=1
+
+# increase client parallel connections
+net.ipv4.ip_local_port_range = 15000 61000
+net.ipv4.tcp_fin_timeout=30
+
+# fast cycling of sockets in time_wait state and re-using them
+net.ipv4.tcp_tw_recycle = 1
+net.ipv4.tcp_tw_reuse = 1
+
+# increase the maximum number of requests queued to a listen socket
+net.core.somaxconn = 8192
+
+# avoid caching tcp network transfer statistics
+net.ipv4.route.flush=1
+#end raw
+EOF
+sysctl -p
diff --git a/deploy/adapters/cobbler/snippets/proxy.xml b/deploy/adapters/cobbler/snippets/proxy.xml
index 52285837..766cbb4c 100644
--- a/deploy/adapters/cobbler/snippets/proxy.xml
+++ b/deploy/adapters/cobbler/snippets/proxy.xml
@@ -1,9 +1,9 @@
-<proxy>
- <enabled config:type="boolean">true</enabled>
- <ftp_proxy></ftp_proxy>
- <http_proxy>$proxy</http_proxy>
- <https_proxy></https_proxy>
- <no_proxy>localhost, 127.0.0.1</no_proxy>
- <proxy_password></proxy_password>
- <proxy_user></proxy_user>
-</proxy>
+<proxy>
+ <enabled config:type="boolean">true</enabled>
+ <ftp_proxy></ftp_proxy>
+ <http_proxy>$proxy</http_proxy>
+ <https_proxy></https_proxy>
+ <no_proxy>localhost, 127.0.0.1</no_proxy>
+ <proxy_password></proxy_password>
+ <proxy_user></proxy_user>
+</proxy>
diff --git a/deploy/adapters/cobbler/snippets/puppet_install_if_enabled b/deploy/adapters/cobbler/snippets/puppet_install_if_enabled
index 10ad5112..f554b8de 100644
--- a/deploy/adapters/cobbler/snippets/puppet_install_if_enabled
+++ b/deploy/adapters/cobbler/snippets/puppet_install_if_enabled
@@ -1,4 +1,4 @@
-#if $str($getVar('puppet_auto_setup','')) == "1"
-puppet
-#end if
-
+#if $str($getVar('puppet_auto_setup','')) == "1"
+puppet
+#end if
+
diff --git a/deploy/adapters/cobbler/snippets/puppet_register_if_enabled b/deploy/adapters/cobbler/snippets/puppet_register_if_enabled
index f42cc4a3..439345a4 100644
--- a/deploy/adapters/cobbler/snippets/puppet_register_if_enabled
+++ b/deploy/adapters/cobbler/snippets/puppet_register_if_enabled
@@ -1,15 +1,15 @@
-# start puppet registration
-#if $str($getVar('puppet_auto_setup','')) == "1"
-# generate puppet certificates and trigger a signing request, but
-# don't wait for signing to complete
-#if $int($getVar('puppet_version',2)) >= 3
-/usr/bin/puppet agent --test --waitforcert 0 #echo (($str($getVar('puppet_server','')) != '') and "--server '"+$str($getVar('puppet_server',''))+"'" or '')
-#else
-/usr/sbin/puppetd --test --waitforcert 0 #echo (($str($getVar('puppet_server','')) != '') and "--server '"+$str($getVar('puppet_server',''))+"'" or '')
-#end if
-
-# turn puppet service on for reboot
-/sbin/chkconfig puppet on
-
-#end if
-# end puppet registration
+# start puppet registration
+#if $str($getVar('puppet_auto_setup','')) == "1"
+# generate puppet certificates and trigger a signing request, but
+# don't wait for signing to complete
+#if $int($getVar('puppet_version',2)) >= 3
+/usr/bin/puppet agent --test --waitforcert 0 #echo (($str($getVar('puppet_server','')) != '') and "--server '"+$str($getVar('puppet_server',''))+"'" or '')
+#else
+/usr/sbin/puppetd --test --waitforcert 0 #echo (($str($getVar('puppet_server','')) != '') and "--server '"+$str($getVar('puppet_server',''))+"'" or '')
+#end if
+
+# turn puppet service on for reboot
+/sbin/chkconfig puppet on
+
+#end if
+# end puppet registration
diff --git a/deploy/adapters/cobbler/snippets/redhat_register b/deploy/adapters/cobbler/snippets/redhat_register
index 966e44f8..3ac0d070 100644
--- a/deploy/adapters/cobbler/snippets/redhat_register
+++ b/deploy/adapters/cobbler/snippets/redhat_register
@@ -1,18 +1,18 @@
-# begin Red Hat management server registration
-#if $redhat_management_type != "off" and $redhat_management_key != ""
-mkdir -p /usr/share/rhn/
- #if $redhat_management_type == "site"
- #set $mycert_file = "RHN-ORG-TRUSTED-SSL-CERT"
- #set $mycert = "/usr/share/rhn/" + $mycert_file
-wget http://$redhat_management_server/pub/RHN-ORG-TRUSTED-SSL-CERT -O $mycert
-perl -npe 's/RHNS-CA-CERT/$mycert_file/g' -i /etc/sysconfig/rhn/*
- #end if
- #if $redhat_management_type == "hosted"
- #set $mycert = "/usr/share/rhn/RHNS-CA-CERT"
- #end if
- #set $endpoint = "https://%s/XMLRPC" % $redhat_management_server
-rhnreg_ks --serverUrl=$endpoint --sslCACert=$mycert --activationkey=$redhat_management_key
-#else
-# not configured to register to any Red Hat management server (ok)
-#end if
-# end Red Hat management server registration
+# begin Red Hat management server registration
+#if $redhat_management_type != "off" and $redhat_management_key != ""
+mkdir -p /usr/share/rhn/
+ #if $redhat_management_type == "site"
+ #set $mycert_file = "RHN-ORG-TRUSTED-SSL-CERT"
+ #set $mycert = "/usr/share/rhn/" + $mycert_file
+wget http://$redhat_management_server/pub/RHN-ORG-TRUSTED-SSL-CERT -O $mycert
+perl -npe 's/RHNS-CA-CERT/$mycert_file/g' -i /etc/sysconfig/rhn/*
+ #end if
+ #if $redhat_management_type == "hosted"
+ #set $mycert = "/usr/share/rhn/RHNS-CA-CERT"
+ #end if
+ #set $endpoint = "https://%s/XMLRPC" % $redhat_management_server
+rhnreg_ks --serverUrl=$endpoint --sslCACert=$mycert --activationkey=$redhat_management_key
+#else
+# not configured to register to any Red Hat management server (ok)
+#end if
+# end Red Hat management server registration
diff --git a/deploy/adapters/cobbler/snippets/repo_config.xml b/deploy/adapters/cobbler/snippets/repo_config.xml
index b3143346..dbdd5d25 100644
--- a/deploy/adapters/cobbler/snippets/repo_config.xml
+++ b/deploy/adapters/cobbler/snippets/repo_config.xml
@@ -1,17 +1,17 @@
-# Repository Config
-#set $repo_data = $getVar("repo_data",[])
-#for $repo in $repo_data
-<listentry>
- #if $repo.mirror_locally
- <media_url>http://$http_server/cobbler/repo_mirror/${repo.name}</media_url>
- #else
- <media_url>${repo.mirror}</media_url>
- #end if
- <product>${repo.name}</product>
- <product_dir>/</product_dir>
- <ask_on_error config:type="boolean">false</ask_on_error>
- <name>${repo.name}</name>
-</listentry>
-#end for
-
-
+# Repository Config
+#set $repo_data = $getVar("repo_data",[])
+#for $repo in $repo_data
+<listentry>
+ #if $repo.mirror_locally
+ <media_url>http://$http_server/cobbler/repo_mirror/${repo.name}</media_url>
+ #else
+ <media_url>${repo.mirror}</media_url>
+ #end if
+ <product>${repo.name}</product>
+ <product_dir>/</product_dir>
+ <ask_on_error config:type="boolean">false</ask_on_error>
+ <name>${repo.name}</name>
+</listentry>
+#end for
+
+
diff --git a/deploy/adapters/cobbler/snippets/restore_boot_device b/deploy/adapters/cobbler/snippets/restore_boot_device
index 5baa801e..1b54e1f4 100644
--- a/deploy/adapters/cobbler/snippets/restore_boot_device
+++ b/deploy/adapters/cobbler/snippets/restore_boot_device
@@ -1,6 +1,6 @@
-if [ "$os_version" == "sles11" ]; then
- nvsetenv boot-device "$(cat /root/inst-sys/boot-device.bak)"
-elif [ "$os_version" == "fedora17" ]; then
- # must be run from a %post --nochroot section
- nvsetenv boot-device "$(cat /tmp/boot-device.bak)"
-fi
+if [ "$os_version" == "sles11" ]; then
+ nvsetenv boot-device "$(cat /root/inst-sys/boot-device.bak)"
+elif [ "$os_version" == "fedora17" ]; then
+ # must be run from a %post --nochroot section
+ nvsetenv boot-device "$(cat /tmp/boot-device.bak)"
+fi
diff --git a/deploy/adapters/cobbler/snippets/rhn_certificate_based_register b/deploy/adapters/cobbler/snippets/rhn_certificate_based_register
index 22c2aa19..29ad1935 100644
--- a/deploy/adapters/cobbler/snippets/rhn_certificate_based_register
+++ b/deploy/adapters/cobbler/snippets/rhn_certificate_based_register
@@ -1,12 +1,12 @@
-# begin Red Hat Network certificate-based server registration
-#if $redhat_management_type == "cert" and $redhat_register_user != "" and $redhat_register_password != ""
-# Subscribe (register) the system
-subscription-manager register --autosubscribe --username=$redhat_register_user --password=$redhat_register_password
-# Add what used to be called channels
-yum -y install yum-utils
-yum-config-manager --enable rhel-6-server-optional-rpms
-yum-config-manager --enable rhel-6-server-supplementary
-#else
-# not configured to use Certificate-based RHN (ok)
-#end if
-# end Red Hat Network certificate-based server registration
+# begin Red Hat Network certificate-based server registration
+#if $redhat_management_type == "cert" and $redhat_register_user != "" and $redhat_register_password != ""
+# Subscribe (register) the system
+subscription-manager register --autosubscribe --username=$redhat_register_user --password=$redhat_register_password
+# Add what used to be called channels
+yum -y install yum-utils
+yum-config-manager --enable rhel-6-server-optional-rpms
+yum-config-manager --enable rhel-6-server-supplementary
+#else
+# not configured to use Certificate-based RHN (ok)
+#end if
+# end Red Hat Network certificate-based server registration
diff --git a/deploy/adapters/cobbler/snippets/rsyslog.xml b/deploy/adapters/cobbler/snippets/rsyslog.xml
index 9267c34d..63eacfee 100644
--- a/deploy/adapters/cobbler/snippets/rsyslog.xml
+++ b/deploy/adapters/cobbler/snippets/rsyslog.xml
@@ -1,71 +1,71 @@
-<file>
- <file_path>/etc/rsyslog.conf</file_path>
- <file_contents>
-<![CDATA[
-\#\#\#\# MODULES \#\#\#\##
-
-\$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
-\$ModLoad imfile
-
-\$WorkDirectory /var/spool/rsyslog
-\$ActionQueueType LinkedList
-\$ActionQueueFileName srvrfwd
-\$ActionResumeRetryCount -1
-\$ActionQueueSaveOnShutDown on
-#if $getVar("compass_server", "") != ""
-\# *.* @@$compass_server:514
-#else
-\# *.* @@$server:514
-#end if
-
-\# Provides UDP syslog reception
-\#\$ModLoad imudp
-\#\$UDPServerRun 514
-
-\# Provides TCP syslog reception
-\$ModLoad imtcp
-\$InputTCPServerRun 514
-#set system_name = $getVar('system_name','')
-\$LocalHostName $system_name
-
-\#\#\#\# GLOBAL DIRECTIVES \#\#\#\##
-
-\# Use default timestamp format
-\$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
-
-\# File syncing capability is disabled by default. This feature is usually not required,
-\# not useful and an extreme performance hit
-\#\$ActionFileEnableSync on
-
-\# Include all config files in /etc/rsyslog.d/
-\$IncludeConfig /etc/rsyslog.d/*.conf
-
-
-\#\#\#\# RULES \#\#\#\##
-
-\# Log anything (except mail) of level info or higher.
-\# Don't log private authentication messages!
-syslog.*,daemon.* /var/log/messages
-
-\# The authpriv file has restricted access.
-authpriv.* /var/log/secure
-
-\# Log all the mail messages in one place.
-mail.* -/var/log/maillog
-
-\# Log cron stuff
-cron.* /var/log/cron
-
-\# Everybody gets emergency messages
-*.emerg *
-
-\# Save news errors of level crit and higher in a special file.
-uucp,news.crit /var/log/spooler
-
-\# Save boot messages also to boot.log
-local7.* /var/log/boot.log
-]]>
- </file_contents>
- <file_owner>root.root</file_owner>
- <file_permissions>600</file_permissions>
-</file>
+<file>
+ <file_path>/etc/rsyslog.conf</file_path>
+ <file_contents>
+<![CDATA[
+\#\#\#\# MODULES \#\#\#\##
+
+\$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+\$ModLoad imfile
+
+\$WorkDirectory /var/spool/rsyslog
+\$ActionQueueType LinkedList
+\$ActionQueueFileName srvrfwd
+\$ActionResumeRetryCount -1
+\$ActionQueueSaveOnShutDown on
+#if $getVar("compass_server", "") != ""
+\# *.* @@$compass_server:514
+#else
+\# *.* @@$server:514
+#end if
+
+\# Provides UDP syslog reception
+\#\$ModLoad imudp
+\#\$UDPServerRun 514
+
+\# Provides TCP syslog reception
+\$ModLoad imtcp
+\$InputTCPServerRun 514
+#set system_name = $getVar('system_name','')
+\$LocalHostName $system_name
+
+\#\#\#\# GLOBAL DIRECTIVES \#\#\#\##
+
+\# Use default timestamp format
+\$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+\# File syncing capability is disabled by default. This feature is usually not required,
+\# not useful and an extreme performance hit
+\#\$ActionFileEnableSync on
+
+\# Include all config files in /etc/rsyslog.d/
+\$IncludeConfig /etc/rsyslog.d/*.conf
+
+
+\#\#\#\# RULES \#\#\#\##
+
+\# Log anything (except mail) of level info or higher.
+\# Don't log private authentication messages!
+syslog.*,daemon.* /var/log/messages
+
+\# The authpriv file has restricted access.
+authpriv.* /var/log/secure
+
+\# Log all the mail messages in one place.
+mail.* -/var/log/maillog
+
+\# Log cron stuff
+cron.* /var/log/cron
+
+\# Everybody gets emergency messages
+*.emerg *
+
+\# Save news errors of level crit and higher in a special file.
+uucp,news.crit /var/log/spooler
+
+\# Save boot messages also to boot.log
+local7.* /var/log/boot.log
+]]>
+ </file_contents>
+ <file_owner>root.root</file_owner>
+ <file_permissions>600</file_permissions>
+</file>
diff --git a/deploy/adapters/cobbler/snippets/save_boot_device b/deploy/adapters/cobbler/snippets/save_boot_device
index 72f97d2e..2afb63f0 100644
--- a/deploy/adapters/cobbler/snippets/save_boot_device
+++ b/deploy/adapters/cobbler/snippets/save_boot_device
@@ -1,5 +1,5 @@
-if [ "$os_version" == "sles11" ]; then
- nvram --print-config=boot-device > /root/boot-device.bak
-elif [ "$os_version" == "fedora17" ]; then
- nvram --print-config=boot-device > /tmp/boot-device.bak
-fi
+if [ "$os_version" == "sles11" ]; then
+ nvram --print-config=boot-device > /root/boot-device.bak
+elif [ "$os_version" == "fedora17" ]; then
+ nvram --print-config=boot-device > /tmp/boot-device.bak
+fi
diff --git a/deploy/adapters/cobbler/snippets/software_chef.xml b/deploy/adapters/cobbler/snippets/software_chef.xml
index 2f732bd4..07677090 100644
--- a/deploy/adapters/cobbler/snippets/software_chef.xml
+++ b/deploy/adapters/cobbler/snippets/software_chef.xml
@@ -1,2 +1,2 @@
- <package>chef</package>
-
+ <package>chef</package>
+
diff --git a/deploy/adapters/cobbler/snippets/ssh.xml b/deploy/adapters/cobbler/snippets/ssh.xml
index 58ad98b9..96fe8bb0 100644
--- a/deploy/adapters/cobbler/snippets/ssh.xml
+++ b/deploy/adapters/cobbler/snippets/ssh.xml
@@ -1,46 +1,46 @@
-#set ssh_keys = $getVar("push_ssh_keys", "/root/.ssh/id_rsa.pub")
-#if $ssh_keys != ""
- #set user_name = $getVar("username", "root")
- #if $user_name == "root"
- #set home = "/root"
- #else
- #set home = "/home/%s" % $user_name
- #end if
-<file>
- <file_path>$home/.ssh/authorized_keys</file_path>
- <file_owner>${user_name}.${user_name}</file_owner>
- <file_permissions>600</file_permissions>
- <file_script>
- <interpreter>shell</interpreter>
- <source>
-<![CDATA[
-\#!/bin/bash
-mkdir -p $home/.ssh
-chmod 700 -R $home/.ssh
- #set $firstline = True
- #for $ssh_key in $ssh_keys.split(',')
- #if not $ssh_key
- #continue
- #end if
- #try
- #set f = $open($ssh_key)
- #if $firstline
-cat << EOL > $home/.ssh/authorized_keys
- #echo $f.read()
-EOL
- #else
-cat << EOL >> $home/.ssh/authorized_keys
- #echo $f.read()
-EOL
- #end if
- #set $firstline = False
- #silent $f.close()
- #except
-# failed to read from $ssh_key
- #end try
- #end for
-]]>
- </source>
- </file_script>
-</file>
-#end if
+#set ssh_keys = $getVar("push_ssh_keys", "/root/.ssh/id_rsa.pub")
+#if $ssh_keys != ""
+ #set user_name = $getVar("username", "root")
+ #if $user_name == "root"
+ #set home = "/root"
+ #else
+ #set home = "/home/%s" % $user_name
+ #end if
+<file>
+ <file_path>$home/.ssh/authorized_keys</file_path>
+ <file_owner>${user_name}.${user_name}</file_owner>
+ <file_permissions>600</file_permissions>
+ <file_script>
+ <interpreter>shell</interpreter>
+ <source>
+<![CDATA[
+\#!/bin/bash
+mkdir -p $home/.ssh
+chmod 700 -R $home/.ssh
+ #set $firstline = True
+ #for $ssh_key in $ssh_keys.split(',')
+ #if not $ssh_key
+ #continue
+ #end if
+ #try
+ #set f = $open($ssh_key)
+ #if $firstline
+cat << EOL > $home/.ssh/authorized_keys
+ #echo $f.read()
+EOL
+ #else
+cat << EOL >> $home/.ssh/authorized_keys
+ #echo $f.read()
+EOL
+ #end if
+ #set $firstline = False
+ #silent $f.close()
+ #except
+# failed to read from $ssh_key
+ #end try
+ #end for
+]]>
+ </source>
+ </file_script>
+</file>
+#end if
diff --git a/deploy/adapters/cobbler/snippets/sshd.xml b/deploy/adapters/cobbler/snippets/sshd.xml
index 4eb97e32..91d56f21 100644
--- a/deploy/adapters/cobbler/snippets/sshd.xml
+++ b/deploy/adapters/cobbler/snippets/sshd.xml
@@ -1,142 +1,142 @@
-<file>
- <file_path>/etc/ssh/sshd_config</file_path>
- <file_contents>
-<![CDATA[
-#raw
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options override the
-# default value.
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# The default requires explicit activation of protocol 1
-#Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
-# Logging
-# obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-#PermitRootLogin yes
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-RSAAuthentication yes
-PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile .ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
-# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
-# in this release. The use of 'gssapi' is deprecated due to the presence of
-# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
-#GSSAPIEnableMITMAttack no
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication. Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-X11Forwarding yes
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-UsePrivilegeSeparation sandbox # Default for new installations.
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem sftp /usr/lib/ssh/sftp-server
-
-# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
-AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
-AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
-AcceptEnv LC_IDENTIFICATION LC_ALL
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-# X11Forwarding no
-# AllowTcpForwarding no
-# ForceCommand cvs server
-#end raw
-]]>
- </file_contents>
- <file_owner>root.root</file_owner>
- <file_permissions>640</file_permissions>
-</file>
+<file>
+ <file_path>/etc/ssh/sshd_config</file_path>
+ <file_contents>
+<![CDATA[
+#raw
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# The default requires explicit activation of protocol 1
+#Protocol 2
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 1024
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+RSAAuthentication yes
+PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile .ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
+# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
+# in this release. The use of 'gssapi' is deprecated due to the presence of
+# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
+#GSSAPIEnableMITMAttack no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+UsePrivilegeSeparation sandbox # Default for new installations.
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem sftp /usr/lib/ssh/sftp-server
+
+# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+# X11Forwarding no
+# AllowTcpForwarding no
+# ForceCommand cvs server
+#end raw
+]]>
+ </file_contents>
+ <file_owner>root.root</file_owner>
+ <file_permissions>640</file_permissions>
+</file>